SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product category:

Part number:

As at date: Verified:

Product description:

Product:

X-RAY TRAINING KITS

SDD-XTK-4006

JANUARY 2005 MAY 2007

This kit contains a five groups of products that should be identifiable individually, and incombination, as the main components of an IED, both in plain view, and under x-ray scrutiny.The contents are packed into a packing case both for storage and transport, and to helpenhance training. The case can be placed in an x-ray machine to allow groups of products to beidentified, and can be removed and connected in series to show the main components of atypical IED.

Both the simulated explosives and inert detonators are x-ray correct.

Kit contents:

X-RAY TRAINING KIT

TIMERS,each operational, mounted into poly carbonate boxes, includingMECHANICAL TIMERELECTRONIC TIMER WITH LIGHT SENSITIVE BOOBY TRAPELECTRONIC TIMER WITH BAROMETRIC TRIGGERACTIVATING PUMP FOR BAROMETRIC TRIGGER12 VOLT BUZZERDETONATORS/BLASTING CAPS, includingDUPONT ACUDET Mk5 REGULAR DETONATOR 220mm LONGNOBEL NONEL SUPER MS DETONATOR WITH DIAZO PRIMARYALUMINIUM PLAIN DETONATOR No 8 STRENGTHALUMINIUM ELECTRIC DETONATOR ZERO DELAYCOPPER ELECTRIC DETONATOR No 8 STRENGTH, ZERO DELAYSWITCHES, includingMERCURY TILT SWITCHLARGE MICRO-SWITCHPOWER SOURCES, including12 VOLT INSTRUMENT BATTERYZINC CHLORIDE 9 VOLT PP3 BATTERYALKALINE 9 VOLT PP3 BATTERYBATTERY HOLDER WITH 4 X AA BATTERIESBUTTON CELL BATTERY (END ON)BUTTON CELL BATTERY (SIDE ON)POLAPULSE BATTERYSIMULATED EXPLOSIVES,THREE TYPES IN PLASTIC CONTAINERS (350gms EACH)

KIT SUPPLIED IN STORAGE/PACKING CASEWITH INSTRUCTION/INFORMATION SHEETS

SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product:

Part number:

Continuation page number:

X-RAY TRAINING KIT

SDD-XTK-4006

1

X-ray training kitAbove - the full kit in case

Below - The component parts of the kit

Left - Timer boxesTop right - Power sources & switches

Centre - DetonatorsBottom right - Simulated explosives

SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product category:

Part number:

As at date: Verified:

Product description:

Product:

X-RAY TRAINING KITS

X-RAY AUDIT/TRAINING DEVICE KIT 1- SMALL

SDD-XTK-4007

JANUARY 2005 MAY 2007

The Audit/Training kit contains a box with a semi transparent removable lid and explosive, timer,detonator and power source fitted in place. The lid can be removed to allow the detonator to bemoved from one position to another. The box is fitted into a foam line case.Around the outside of the box are all the individual components inside the box.The case can be placed into an x-ray machine and the signature of the individual componentscompared to the same signatures of the items inside the box.The box can be placed inside an item of luggage to act as an audit device during testing.The Small Kit has a single timer, detonator and power source, and a smaller quantity ofexplosive to the large kit

Kit contents:

PLASTIC BOX, WITH TRANSPARENT LID, CONTAINING:0.5kgs OF SIMULATED PLASTIC EXPLOSIVE

1 ELECTRIC ALUMINIUM ZERO DELAY DETONATOR 1 PP3 9 VOLT BATTERY 1 ELECTRONIC TIMER MECHANISM (non-operational) REMOVABLE LID TO ALLOW CHANGE IN ORIENTATION OF DETONATOR

SET OF INDIVIDUAL COMPONENTS MOUNTED AROUND THE BOX IN CASE

SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product:

Part number:

Continuation page number:

X-RAY AUDIT/TRAINING DEVICE KIT 1 - SMALL

SDD-XTK-4007

1

X-ray Audit kit - SmallTop - Full kit in case

Bottom - Audit box with components

SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product category:

Part number:

As at date: Verified:

Product description:

Product:

X-RAY TRAINING KITS

X-RAY AUDIT/TRAINING DEVICE KIT 1- LARGE

SDD-XTK-4008

JANUARY 2005 MAY 2007

The Audit/Training kit contains a box with a semi transparent removable lid and explosive, timer,detonator and power source fitted in place. The lid can be removed to allow the detonator to bemoved from one position to another. The box is fitted into a foam line case.Around the outside of the box are all the individual components inside the box.The case can be placed into an x-ray machine and the signature of the individual componentscompared to the same signatures of the items inside the box.The box can be placed inside an item of luggage to act as an audit device during testing.The Large Kit has a two timers, two detonators and two power sources, and a larger quantity ofexplosive compared to the small kit

Kit contents:

PLASTIC BOX, WITH TRANSPARENT LID, CONTAINING: 1.0kgs OF SIMULATED PLASTIC EXPLOSIVE 2 ELECTRIC DETONATORS (1 x ALUMINIUM & 1 x COPPER) 1 PP3 9 VOLT BATTERY 1 AA BATTERY HOLDER with 4 AA BATTERIES 1 ELECTRONIC TIMER MECHANISM (non-operational) 1 MECHANICAL TIMER MECHANISM (non-operational) REMOVABLE LID TO ALLOW CHANGE IN ORIENTATION OF DETONATOR

SET OF INDIVIDUAL COMPONENTS MOUNTED AROUND THE BOX IN CASE

SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product:

Part number:

Continuation page number:

X-RAY AUDIT/TRAINING DEVICE KIT 1 - LARGE

SDD-XTK-4008

1

X-ray audit kit - LargeAbove - Full kit in caseLeft - The audit box (large)Below right - Power sourcesBelow - Simulated explosive

SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product category:

Part number:

As at date: Verified:

Product description:

Product:

X-RAY TRAINING KITS

X-RAY RADIO TEST/AUDIT KIT

SDD-XTK-4009

JANUARY 2005 MAY 2007

The Radio Test/Audit kit follows the same theme as the Small and Large Audit/Training kits, butwith the samples fitted into a radio unit. A twin speaker unit also allows for this one space to beadapted as an IED.The radio is fitted into the case, with the components fitted around the outside of the unit.The case can be placed into an x-ray machine and the signature of the individual componentscompared to the same signatures of the items inside the radio.The radio can be placed inside an item of luggage to act as an audit device during testing.

PLEASE NOTE: THE TYPE OF RADIO (CD/CASSETTE) UNIT IS SUBJECT TO CHANGEDEPENDING ON AVAILABILITY OF A SUITABLE UNIT

Kit contents:

RADIO UNIT, FITTED WITH:

BAROMETRIC PRESSURE SWITCH TO INITIATE TIMER AN ELECTRONIC SEMI-CONDUCTOR TYPE TIMER CONCEALED EXPLOSIVE IN INSTRUCTION SHEET WRAPPER ELECTRIC DETONATOR POWER SUPPLY CONCEALED IN A MATCHBOX

THE KIT IS ALSO SUPPLIED WITH A SECOND SET OF THE ABOVE COMPONENTS FOR IDENTIFICATION AND INDIVIDUAL X-RAY SIGNATURE REMOVED COMPONENTS FROM THE RADIO INCLUDING SPEAKER AND CASSETTE MECHANISM

SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product:

Part number:

Continuation page number:

X-RAY RADIO TEST/AUDIT KIT

SDD-XTK-4009

1

Components of the X-ray Radio Test/Audit kitNote: The configuration of this kit may change

As a result of the availability of suitableradio/CD/cassette units

SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product category:

Part number:

As at date: Verified:

Product description:

Product:

X-RAY TRAINING KITS

X-RAY DETONATOR TRAINING KIT

SDD-XTK-4004

JANUARY 2005 MAY 2007

The X-ray Detonator Training Kit contains a range of typical detonators, plain, electric andimprovised.

The detonators are filled with inert components to ensure that under x-ray conditions thesignature is correct.

The whole case can be placed in an x-ray machine to compare the signature of different typesof detonator, and they can also be removed from the kit to provide an individual signature.

Kit contents:

PLAIN TYPE - ALUMINIUM CAPPED FUZE ELECTRIC No 8 STRENGTH ZERO DELAY - ALUMINIUM ELECTRIC No 8 STRENGTH ZERO DELAY - COPPER ELECTRIC No 8 STRENGTH ZERO DELAY - CARDBOARD (USING HX-10 1.5 SQUIB IGNITOR) ELECTRIC DELAY TYPE - ALUMINIUM ELECTRIC NON LEAD PRIMARY IRECO MILLIDET NON ELECTRIC INITIATION TYPE (NONEL) EXPLODING BRIDGEWIRE TYPE (EBW) CONTACT TYPE IMPROVISED MODEL ROCKET SQUIB IMPROVISED DETONATOR - .45 ACP CASE IMPROVISED DETONATOR - COPPER CASED

SECURITY DESIGN & DEVELOPMENT LTDTelephone for Sales & Administration: + 44 (0) 1832 733440

Telephone & fax for Production: + 44 (0) 1525 853850e-mail: syme@dial.pipex.com

Product:

Part number:

Continuation page number:

X-RAY DETONATOR TRAINING KIT

SDD-XTK-4004

1

The complete X-ray Detonator Training Kit