Post on 03-Jun-2018
8/12/2019 Section8 PULLERS
1/8
Universal Pullers
Nut Splitters
Stud Extractors
Special Tools
Too ls for Li fe
8
National Number
0861-GEDORE(0861-433673)
8/12/2019 Section8 PULLERS
2/8
Code No.Running
Depth
Max.
Opening ExclVAT
040010 8564-2 100 110 1000 549.00
040030 8564-3 140 150 1900 748.00
040050 8564-4 200 200 2300 1,044.00
040440 8564-4 HSP1L Puller & Spindle 105 200 3700 3,331.00
Code No.Running
Depth
Max.
Opening ExclVAT
040427 8562-1 50 60 200 490.00
040428 8562-2 70 70 300 490.00
Code No.Running
Depth
Max.
Opening ExclVAT
040460 8220-20HSP1 Puller & Spindle 90 180 3600 4,365.00
040470 8220-30HSP3 Puller & Spindle 100 280 9900 6,562.00
040480 8220-20L HSP1 Puller & Spindle 90 180 5100 4,620.00
040490 8220-30L HSP3 Puller & Spindle 100 280 13100 7,367.00
Code No.Running
Depth
Max.
Opening ExclVAT
040150 8220-10 105 110 1200 1,167.00
040180 8220-20 160 180 3100 2,017.00
040210 8220-30 210 280 8500 4,329.00
040160 8220-10L 200 110 1800 1,302.00
040190 8220-20L 310 180 4500 2,364.00
040220 8220-30L 410 280 11600 5,165.00
Code No. ExclVAT
040170 8220-10P 151 900 460.00
040200 8220-20P 220 2000 756.00
040230 8220-30P 308 5000 1,672.00
PULLERS
8562PULLER with Twin GripFor removing small parts such as battery terminals, pulleys, wheels,ball bearings etc.
8220
UNIVERSAL PULLERS
8563
Code No.Running
Depth
Max.
Opening ExclVAT
040417 8563-1 55 60 300 607.00
8564PULLER with Twin Grip
PULLER with Twin GripFor the safe and fast removal of sheaves, wheels, ball bearings etc.Strong drop forged design.Reversible hooks permit use as an internal or external puller.
Available in standard length or with extensions for extra length.
PULLER with Triple GripFor removing small parts suchas battery terminals, pulleys, wheels,ball bearings etc.
8/12/2019 Section8 PULLERS
3/8
Code No.Running
Depth
Max.
Opening ExclVAT
040070 8566-1 300 300 9800 3,163.00
040080 8566-2 400 400 10800 3,188.00
040495 8566-1 HSP3 Puller & Spindle 105 300 10100 5,633.00
040500 8566-2 HSP3 Puller & Spindle 110 370 11100 5,658.00
Code No.Running
Depth
Max.
Opening ExclVAT
040020 8565-2 80 120 1300 808.00
040040 8565-3 140 160 2500 985.00
040060 8565-4 200 220 4000 1,311.00
040450 8565-4 HSP1L Puller & Spindle 105 220 4600 3,728.00
Code No.Running
Depth
Max.
Opening ExclVAT
040120 8569-1 80 150 1000 828.00
040140 8569-2 140 200 2700 1,407.00
Code No.Running
Depth
Max.
Opening ExclVAT
040110 8568-1 100 150 800 721.00
040130 8568-2 140 200 1900 1,097.00
Code No.Running
Depth
Max.
Opening
ExclVAT
040090 8567-1 400 350 11900 4,158.00
040100 8567-2 400 420 13000 4,290.00
040505 8567-1 HSP3 Puller & Spindle 110 345 12100 6,305.00
040510 8567-2 HSP3 Puller & Spindle 110 350 13300 6,381.00
PULLERS / SPECIAL TOOLS
8
8565
8566PULLER with Twin Grip
8567PULLER with Triple GripSuitable for industrial purposes and heavy agriculturaland construction machines
8568
8569
PULLER with Triple Grip
PULLER with Twin GripHeavy duty model for the removal ofsheaves, wheels, ball bearings etc
PULLER with Triple GripHeavy duty model for the removal of sheaves,wheels, ball bearings etc
www.gedore.co.za
www gedore co zwww.gedore.co.za
www gedore co zwww.gedore.co.za
8/12/2019 Section8 PULLERS
4/8
HYDRAULIC PRESSURE SPINDLES
Code No.Force
CapacityPuller Ref. ExclVAT
040350 HSP1L 6ton - Twin Grip
10ton - Triple Grip
8564-4
8565-41300 2,797.00
040360 HSP1 6ton - Twin Grip 8220-20
8220-20L1200 2,812.00
040400 HSP3 8ton - Twin Grip
12ton - Twin Grip
15ton - Triple Grip
8220-30
8220-30L
8566-1
8566-2
8567-1
8567-2
3300 3,475.00
HSPHSP Grease Hydraulic Pressure SpindleThe grease-hydraulic pressure spindle has been designed forcontrolled and safe pulling work, and is set up for a pressure of upto 15 t.
UNIVERSAL PULLERSHydraulic bolt
Grub screw
Hydraulic spindle
Tip
Ball 9/16 or 5/8
1
Preparation for use:1. Before using, check whether the pressure spindle is screwed far enough out of the cap, so that the pressure pad is in the initial position in the hydraulic cylinder.2. Unscrew the cap from the spindle body. First slacken off the grub screw.3. Screw the spindle body from below into the crossbeam of the puller until the body protrudes approx. 60 mm from the crossbeam.4. Screw the cap onto the spindle body until the stop, and then fix it in position by turning in the grub screw.
Use and operation:
1. Place the puller into position andpre-tension the spindle body using asize 32 or 41 mm wrench.
2. Screw the pressure spindle size 12 or17 mm into the cap. The hydraulicprocess will come into play.The workpiece that has been loosenedby the hydraulic force may be pulled off
completely by turning the spindle bodywith the 32 or 41 mm cap.
3. After use, the pressure spindle (size 12or 17 mm) is turned back into its initialposition and the pressure pad pushedinto the hydraulic cylinder.
HSP Grease Hydraulic Pressure Spindle....The grease-hydraulic pressure spindle has been designed for controlled and safe
pulling work, and is set up for a pressure of up to 15 t.
5 6
2 43
Adjusting cap nut
8/12/2019 Section8 PULLERS
5/8
Code No. mm ExclVAT
041010 8600-1 4 - 10 290 485.50
041020 8600-2 8 - 25 570 705.00Code No.
For nuts
up toMax. ton ExclVAT
040790 1.26/1 22 5 700 3,060.00
040870 1.26/2 32 13 3800 4,974.00
PULLERS / SPECIAL TOOLS
8
1.26
NUT SPLITTER
HYD NUT SPLITTER - HydraulicFor splitting jammed or stripped nuts without damaging the bolt thread.With strong chisel, additionally induction hardened atthe cutting edge for breakage resistance.The chamfer at the chisels edge improvesthe splitting effect and prevents breakage.
8600STUD EXTRACTORFor inserting and removing studsSuitable for extremely short stud ends.
STUD EXTRACTOR
UNIVERSAL PULLERS
1.07/KPULLER SETIn plastic case.Dimensions - 120 x 250mm
Code No. ExclVAT
8117340 1.07/K 5000 8,316.00
Contents: 2-arm cross piece
3-arm cross piece
3 x pulling hooks - 100mm
3 x pulling hooks - 200mm
3 x slim pattern pulling hooks - 250mm
o
8/12/2019 Section8 PULLERS
6/8
Code No. for PullerClamping
Range ExclVAT
8019680 1.40/0 1.38/0 5 - 60 1100 936.00
8019760 1.40/1 1.38/1 12 - 75 3600 1,188.00
8019840 1.40/2 1.38/2 22 - 115 2300 1,953.00
8019920 1.40/3 1.38/3 30 - 155 4400 3,061.00
Code No.Running
Depth
Max.
Opening ExclVAT
8017550 1.38/0 160 120 1000 912.00
8017630 1.38/1 230 165 2400 1,501.00
8017710 1.38/2 250 215 3800 2,224.00
8017980 1.38/3 270 300 7200 3,376.00
Code No.Running
Depth
Max.
Opening ExclVAT
8006190 1.15/1 140 130 1100 1,144.00
8006350 1.15/2 210 200 2900 1,985.00
PULLERS / SPECIAL TOOLS
o
Code No. ExclVAT
1120778 1.85/1 4600 14,025.00
Contents: 33 x Impact Rings
-10-50mm for external 26-110mm
Recoil-free hammer - 1,2kg
3 x Aluminium sleeves
1.15PULLER with Triple GripHeavy duty model for the removalof sheaves, wheels, ball bearings etc
1.38SEPARATOR PULLERUsed together with the bearing separators1.40 series.The tension bolts are screwed intothe threaded holes in the bearingseparator.
1.40
SPECIAL TOOLS
1.73UNIVERSAL BALL JOINT PULLERFor removing ball joints on cars and trucks.
Code No.Clamping
Height
Fork
Depth ExclVAT
8030810 1.73/1 65 24 1100 1,238.00
1.85BEARING INSTALLATION SET
Sturdy plastic bearing installation set. Impact resistant plastic is light,but as robust as metal variants. This set guarantees that the installedbearings will suffer no damage that might have occured when working
metal to metal Ensures nodeformations of the bearing
housings, sealing rings or shafts.
BEARING SEPARATORFor removing taper roller and ball bearings, inner bearing races andother tightley-seated or thin walled parts.
Operation:The sharp edges of the separatorblades are pressed behind the partand it is then withdrawn usingthe 1.38 puller.To avoid damage to delicateparts, the flat surfacesof the separator are used.This produces a largesupport surface thatprevents deformation.
8551
Code No. ExclVAT
6759890 8551-88 Bolt Extractor Set 750 1,218.00
Sizes: 1 2 3 4 5 6 7 8
BOLT EXTRACTOR SET
Drill a central hole into the broken bolt.
Turn the bolt extractor to the left into
this hole until it grips and removesthe bolt. Always use the maximum
possible extractor size.
8/12/2019 Section8 PULLERS
7/8
Contents2-arm cross piece - 140mm
3-arm cross piece - 140mm
3 x pulling hooks - 100mm
3 x slim pattern pulling hooks - 100mm
2-arm battery terminal puller
Nut splitter
Stud extractor
Dismantling & Assembly fork
Universal ball joint puller
Oil filter hook
Contents4 x 2-arm cross piece
140mm 180mm 220mm 260mm
4 x 3-arm cross piece
140mm 180mm 220mm 260mm2 x Spindles
Hydraulic pressure spindle
6 x Pulling hooks
Contents2-arm cross piece - 260mm
3-arm cross piece - 260mm
3 x pulling hooks - 100mm
3 x pulling hooks - 300mm
3 x slim pattern pulling hooks - 220mm
Spindle
Hydraulic pressure spindle
Bearing separator
Contents2 x 2-arm heads
2 x 3-arm heads
3 x pulling hooks - 210mm
3 x pulling hooks - 260mm
3 x pulling hooks - 390mm
2 x Spindles
Hydraulic pressure spindle
PULLER KITS
8
2.20TRUCK WORKSHOP KITClearly arranged modular system on pegboard.
2.30INDUSTRY PULLING KITFor the assembly of 1.06 and 1.07 pullers.Clearly arranged modular system on pegboard.
2.40CONSTRUCTION MACHINES KITFor the assembly of 1.14 and 1.15 pullers.Clearly arranged modular system on pegboard.
2.10CAR WORKSHOP KITClearly arranged modular system on pegboard.
Code No. ExclVAT
1088696 2.10PKW 11500 11,349.00 Code No. ExclVAT
1393014 2.30 11500 15,796.00
Code No. ExclVAT
1393030 2.40 11500 13,274.00
Code No. ExclVAT
1088718 2.20LKW 14000 19,118.00
8/12/2019 Section8 PULLERS
8/8
Contents8220-20 Twin Grip Puller
8220-20P Extensions
8565-4 Triple Grip Puller
HSP 1 Hydraulic Pressure Spindle
8569-2 Universal Triple Grip Puller
8600-2 Stud Extractor
267-40 Hammer
1450S Tool Panel
Contents8220-10 Twin Grip Puller
8220-10P Extensions
8562-2 Ba ttery Terminal Puller
8565-2 Triple Grip Puller
8569-1 Universal Triple Grip Puller
8600-2 Stud Extractor
1.38-0 Separator Puller
1.40-0 Bearing Separator Puller
1.73-1 Ball Joint Puller
1.75-1 Oil Filter Remover
267-40 Hammer
1450S Tool Panel
PULLER KITS
INDUSTRIAL KITClearly arranged modular
system on pegboard.
Code No. ExclVAT
634840 Industrial Puller Kit 19311 9,759.00
CAR WORKSHOP KITClearly arranged modular system on pegboard.
Code No. ExclVAT
634859 Car Workshop Puller Kit 14811 8,840.00
www.gedore.co.za
www gedore co zwww.gedore.co.za
www gedore co zwww.gedore.co.za
wNew
wNew