1

/

Save these instructions for future reference.

B

CAUTION• Keepclothing,hairandfaceawayfromflame.• Donotplacetorchundercoveredshelterorumbrella,nearpedestriantrafficorcombustiblessuchaswoodstructures,fuel,clothingordryvegetation.

• DonotuseFuelCanisteroutsideofGlowingTableTorch.

• Useonlyinawellventilatedarea.• Donotuseinwindyconditions.• DonottipGlowingTableTorchasfuelcanspillandcausefireorseriousinjury.

CA

GlowingTableTorchActivation: • Utilize Glowing LED option at night for optimal

illumination effect (see FIG 1). - Push once for white LED. - Push twice for multi-colored LED. - Push three times to turn off.

InstructionsandWarningsProductBoxContents:

A. 1 Glowing Table Torch (requires 2 AA batteries - included)

B. 1 Snuffer CapC. 1 Fuel Canister with Flame Guard

Glowing Table Torch

WARNING• Readandunderstandtheseinstructionsbeforeuse!

• Foroutdoortabletopuseonly!• Keepoutofreachofchildrenandpets.• Neverleaveaburningtorchunattended.• Hotwhileinuse.• Topreventburninjuries,snuffandallowtocoolfor30minutesbeforehandling,refillingorcleaning.

• FailuretofollowInstructionsandWarningsmayresultinseriousinjuryorpropertydamage.

• UseonlyTIKI®Brandtorchfuel-Donotusegasolineorotherflammablefuel.

• Donotoverfill.• Neverfillaburningtorch.• Beforerefilling,carefullyplacetheSnufferCapovertheflametoextinguish.

• Torchfuelisharmfulorfatalifswallowed.Containspetroleumhydrocarbons.

• ReadWarningsontorchfuelcontainercarefully.

GlowingTableTorchFuel-Options

Glowing Table Torch Fuel Canister• FillwithTIKI® Brand

OFF!® BiteFighter® or Citronella Torch Fuel.

/

FIG1

2

Refilling: • Carefully place the metal Snuffer completely over the

Wick until the flame is extinguished – DO NOT BLOW OUT (see FIG 5). Allow to cool for 30 minutes before handling and refilling.

• Remove the Fuel Canister from the Glowing Table Torch Globe. • Unscrew the metal Flame Guard from the Fuel

Canister (see FIG 2). • FillwithTIKI® Brand Torch Fuel – DO NOT OvERFILL (see FIG 3). • Reattach the metal Flame Guard to the Fuel Canister – DO NOT

OvERTIGhTEN (see FIG 2). • Wipe away any spilled fuel before lighting.

Extinguishing: • Carefully place the metal Snuffer completely over the

Wick until the flame is extinguished – DO NOT BLOW OUT (see FIG 5).

Note: Leave the Snuffer on the Glowing Table Torch to prevent water contamination.

Note: If the Fuel becomes contaminated with water, the Wick and Fuel must be replaced and properly disposed of in accordance with local laws and regulations.

/

FIG5

FillingandLighting: • Remove the Fuel Canister from the Glowing Table Torch

Globe. • Unscrew the metal Flame Guard from the Fuel

Canister (see FIG 2). • FilltheFuelCanisterwith3oz.ofTIKI® Brand Torch

Fuel - DO NOT OvERFILL (see FIG 3). • Reattach the metal Flame Guard to the Fuel

Canister - DO NOT OvERTIGhTEN (see FIG 2). • Wipe away any spilled fuel before lighting. • Place the Fuel Canister into the Glowing Table Torch Globe. • Allow the Wick to become saturated with fuel before lighting. • UseaTIKI® Brand Lighter or long fireplace match to light the

Glowing Table Torch (see FIG 4).

/

FIG4

1/2” (13 mm)FIG2

ProperWick

Position

1/2” (13 mm)

FIG3

Fuel Fill

Level

02/13 4000010N13

©2013LamplightFarmsInc.•W140N4900LillyRd.,MenomoneeFalls,WI53051•www.tikibrand.com•www.lamplight.com TIKI® & PARADISEINYOURBACKYARD®areregisteredtrademarksofLamplightFarmsInc.

OFF!®isaregisteredtrademarkofS.C.Johnson&Son,Inc.usedunderlicense.DesignedandEngineeredinMenomoneeFalls,Wisconsin•AssembledinChina•CustomerService:1-888-473-1088

Storage: • Store Fuel in original Fuel Bottle with Cap secured, and dispose of any

unwanted Fuel in accordance to local laws and regulations. • Store in upright position (see FIG 9). • For best results, store product away from the weather

conditions when not in use. • Remove batteries for long term storage.

1/2” (13 mm)FIG8

WickReplacement: • Carefully remove the Wick from the Flame

Guard (see FIG 7). Properly dispose of the Wick in accordance with local laws and regulations.

• Replace the Wick with a new TIKI® Torch Wick and position the Wick with 1/2" exposed (see FIG 8).

• Trim as required.

ProperWick

Position

FIG7

BatteryReplacement: • Remove the cover retaining screws and open the battery

compartment cover (see FIG 6). • Remove the old batteries carefully. • Replace Batteries with (2) AA Batteries. • Replace the battery compartment cover and retaining

screws.

AA

AA

_

+

_

+

FIG6

/

FIG9

CAUTION• Donotmixstandard,alkaline,andrechargeablebatteries.

• Donotmixoldandnewbatteries.• Removebatteriesforstorage.• Disposeofbatteriesproperly.

Cleaning: • Use damp cloth to remove debris from glass as needed.