Sapbpc nw 10.0 consolidations ic matching & ic booking v5

________________________________________________________________________

Author: Chief Architect:

Sulthan Mohammad Jothi Periasamy

SAP EPM/BPC Project Lead/Manager/Architect SAP HANA/EPM/BI/EIM Community Thought Leader

SAP EPM Community Member SAP BPC/BOBJ/BW/MDM Community Domain Champion

sulthan1@gmail.com Joesaran@gmail.com , (916)-296-0228 - Cell

CloneSkills, Inc., http://www.CloneSkills.com , Info@CloneSkills.com , 1.800.836.8959, Page - 1

A SAP EPM Community Service

01/01/2012

SAP BPC NW 10.0 Knowledgebase

Intercompany Matching & Booking Implementation Guide

________________________________________________________________________

01/01/2012

Table of Contents

i. Business Scenario ..................................................................................... 3

ii. Overview .................................................................................................... 3

iii. Business Example ...................................................................................... 4

iv. Solution Building Blocks: ............................................................................ 8

v. Create and Populate Dimensions & Model:.............................................. 11

vi. Set up Logic Scripts ................................................................................. 18

vii. Set up Business Rules ............................................................................. 21

viii. Set ups in the Excel Interface of the EPM add-in. .................................... 26

ix. Appendix: ................................................................................................. 40

x. Status on the log files of FXTRANS package. .......................................... 40

xi. Status on the log files of ICDATA package. ............................................. 40

xii. Status on the log files of ICBOOKING package. ...................................... 40

xiii. Dimension Structures ............................................................................... 41

xiv. Structure of Rate Model (IC_Rates) ......................................................... 43

xv. Disclaimer: ............................................................................................... 44

________________________________________________________________________

01/01/2012

Business Scenario:

During moth end/period close, there are situations where each company is struggled with differences in the intercompany Accounts Receivable / Accounts Payable reconciliations. The main problem for this imbalance between subsidiary GL posting is that the data accessibility and integration across organization and its source systems. The option of using one model with data access controlled via member access profiles for the data source dimension may take security too complex. For this reason, a separate intercompany matching model is considered.

Overview:

This document illustrates the necessary steps required to set up a simple Intercompany Matching application. A typical Intercompany Matching process will have the following functionalities.

• The data is collected either by an Input Schedule or by using the Data Import option in the Data Manager package. In this guide, it is assumed that data is already collected.

• Currency Conversion process is used to translate the local currency to the matching currency using the standard Currency conversion package

• ICDATA process is used to copy the data into unique data source members to facilitate the reconciliation.

• ICBOOKING process is used to generate the balancing entries

• Intercompany matching report is created using EPM add-in Excel functions to identify the mismatches.

________________________________________________________________________

01/01/2012

Business Example:

________________________________________________________________________

01/01/2012

Intercompany matching:

A France Entity (FR) owes US entity for a business transaction of 100 EUR. The intercompany members of France (Seller) and US (Buyer) are I_FR & I_US respectively. The transactions are written as given in the following table.

Entity Intco Account Datasrce Local Currency

FR I_US AS27480000 – Other Loans INPUT 100

US I_US LI16870000 – Other Debts INPUT 130

Currency Translation For the above transactions, the local currency is translated into EURO and the EUR/USD exchange rate of 1.40 is used in this case.

Entity Intco Account Datasrce Value EUR

FR I_US AS27480000 – Other Loans INPUT 100

US I_US LI16870000 – Other Debts INPUT 92.86

________________________________________________________________________

01/01/2012

ICDATA process This IC matching process generates the following 4 different new records based on the Data source structure.

Entity INTCO Account Datasrce Value EUR

FR I_US AS27480000 – Other Loans Debit1 100

US I_FR AS27480000 – Other Loans Debit2 100

FR I_US LI16870000 – Other Debts Credit1 92.86

US I_FR LI16870000 – Other Debts Credit2 92.86

ICBOOK Process The difference of 7.14 is corrected by one of the entities using the ICBOOK process to book the differences according to the specific rules mentioned in the business rules section.

________________________________________________________________________

Author:

Sulthan Mohammad

SAP EPM/BPC Project Lead/Manager/Architect

SAP EPM Community Member

sulthan1@gmail.com

CloneSkills, Inc., http://www.CloneSkills.com

Solution Data Model

________________________________________________________________________

Chief Architect:

Jothi Periasamy

/Architect SAP HANA/EPM/BI/EIM Community Thought

SAP BPC/BOBJ/BW/MDM Community Domain Champion

Joesaran@gmail.com , (916)-296-0228 - Cell

http://www.CloneSkills.com , Info@CloneSkills.com , 1.800.836.8959, Page - 7

Data Model:

________________________________________________________________________

Thought Leader

Domain Champion

01/01/2012

________________________________________________________________________

01/01/2012

Solution Building Blocks:

� Models needed:

o ICMatchBooking - Finance/Reporting type model and the

data entry mode is of year-to-date. o Rates – Standard reference model to store the exchanges

rates.

� Dimensions needed: The model ICMatchBooking uses the following dimensions (minimum required properties and dimensions are used to keep it simple) Dimension Name Dimension Type

IC_ACT A – Account

IC_TRL D – Audit

CATEGORY C – Category

ENTITY E – Entity

FLOW S – Subtables

RPTCURRENCY C – Currency

TIME T – Time

IC_INT I -- Intercompany

SCOPE G -- Group

The model Rates uses the following dimensions (minimum required properties and dimensions are used to keep it simple) Dimension Name Dimension Type

R_ACCOUNT A – Account

CATEGORY C – Category

R_ENTITY E – Entity

________________________________________________________________________

01/01/2012

INPUTCURRENCY C – Currency

TIME T – Time

� Data Manager Packages: The following standard DM packages are used with no customization. 1. FX Restatement – for currency translation 2. ICDATA – for copying data into unique data source

members 3. ICBOOKING – to generate the balancing entries.

� Business Rules 1. Currency Translation Business Rule 2. Intercompany Bookings Business Rule

Note: No business rule is required for ICDATA.

� Logic Scripts: 1. An FXTRANS.LGF logic file for currency translation will

translate into a reporting currency that is selected at run time.

2. An ICDATA logic file for intercompany reconciliation 3. An ICBOOKING logic file for booking the matching

differences.

________________________________________________________________________

01/01/2012

Implementation Steps:

________________________________________________________________________

01/01/2012

Create and Populate Dimensions & Model: Step 1 Log into Web Admin Client using Primary Admin account (or any account with necessary task profile access that can create Model/Dimension and other building blocks)

________________________________________________________________________

01/01/2012

Step 2 Click on “Planning and Consolidation Administration” option at the lower right corner.

________________________________________________________________________

01/01/2012

Step 3 Create all the dimensions under Dimensions tab.

________________________________________________________________________

01/01/2012

Step 4 Add a property called IC_ORGINE of size 2 to the datasrce dimension. The ICDATA program copies from the INPUT Data source into the Credit and Debit members based on the Intercompany_ORIGINE property. Add the following members to the dimension IC_TRL.

________________________________________________________________________

01/01/2012

Step 5 The intercompany dimension of type I, is important for the intercompany matching. This DIM must have another property called ENTITY whose values are Entity names.

________________________________________________________________________

01/01/2012

Step 6 The accounts used for Intercompany matching must have the RATETYPE of CLO as follows.

________________________________________________________________________

01/01/2012

Step 7 Create the Financial ICMatchBooking model with the following structure.

Note: Rate Model – IC_Rates is referenced in this model.

________________________________________________________________________

01/01/2012

Set up Logic Scripts

1. Click Administration tab/Rules/Logic Scripts and choose the

model (ICMatchBooking) as follows.

________________________________________________________________________

01/01/2012

2. Create the following 3 scripts and the contents of the scripts are given below.

________________________________________________________________________

01/01/2012

________________________________________________________________________

01/01/2012

Set up Business Rules

1. Click Administration tab/Rules/Business Rules and choose the model (ICMatchBooking) as follows.

________________________________________________________________________

01/01/2012

2. Add the following 2 rule types by clicking “Add/Remove rule Types”

________________________________________________________________________

01/01/2012

3. Click on the currency Translation and add the following 2 rules for the translation. The contents for the AVG & CLO are also given below.

________________________________________________________________________

01/01/2012

________________________________________________________________________

01/01/2012

4. Now click on “Intercompany bookings” rule types. Then create the following rule for the parent ID CTLICEND00. The content of the business rule is as follows. Here the type must be S-Seller rule which will post intercompany differences to the buyer.

________________________________________________________________________

01/01/2012

Set ups in the Excel Interface of the EPM add-in.

1. Go to the Start page of the Planning and Consolidation main page and click the EPM Office Add-in Excel at the right side under the Launch tab.

________________________________________________________________________

01/01/2012

2. It opens up the EPM connection manager and prompts to

choose the connection as follows.

3. Double click the model that you have created for the ICMatching (Click on ICMatchBooking).

________________________________________________________________________

01/01/2012

4. In the following screen, click Data Manager tab. Then click

“Organize”,”Organize package list” to go the package maintenance Screen.

________________________________________________________________________

01/01/2012

5. Click “Package” at the top left corner, then click “Add a

package”.

Then press “select”, to select the process chain in the above screen. Task type can be either user package and/or admin package.

________________________________________________________________________

01/01/2012

6. Select the process chain /cpmb/ICDATA under the script logic, then press okay.

________________________________________________________________________

01/01/2012

7. Now name the package as follows and then press Add to add the package.

8. Follow the steps 5 through 7 to add other packages for FXTRANS & ICBOOKING

________________________________________________________________________

01/01/2012

9. Click EPM tab. Then click new report to the following screen.

________________________________________________________________________

01/01/2012

10. The following input form is used to load the data into RATE model (IC_rates).

________________________________________________________________________

01/01/2012

11. Using the report editor, create the following input

schedule form to load the data for the ICMatchBooking model.

Note: the data in the shaded area is out of scope, it can be ignored.

________________________________________________________________________

01/01/2012

12. By clicking “Save data”, the data is saved into ICMatchBooking model.

Press OK to clear the popup window. Note: the data in the shaded area is out of scope, it can be ignored.

________________________________________________________________________

01/01/2012

13. Now run the currency translation package “FX Restatement” by choosing Data Manager tab/ Run package option. After the successful execution of the pacakge, the screen looks as follows.

________________________________________________________________________

01/01/2012

14. Now click the “New Report” under EPM tab and create the

following report using the report editor. The ICMatching report looks as follows.

________________________________________________________________________

01/01/2012

15. Now to copy the data into the unique source members

(Credit1/Debit1/Credit2/Debit2) to make the reconciliation easier, run the ICDATA package. After the successful run, the screen looks as follows.

________________________________________________________________________

01/01/2012

16. Now run the ICBooking package to generate the balancing entries. After the successful execution of the package, the output should like as follows.

As we defined the Seller rules in the logic script, the above report explains that the seller (FR) is correct and therefore the difference goes to the buyer (US). The ICBOOKING package posts offsetting entries to make intercompany Accounts payable equal Accounts Receivable

________________________________________________________________________

01/01/2012

Appendix: Status on the log files of FXTRANS package. LOG BEGIN TIME:2012-01-17 01:41:47 FILE:\ROOT\WEBFOLDERS\ENVIRONMENT073_1\ADMINAPP\ICMatchBooking\FXTRANS.LGF USER:NEWEPM073 APPSET:ENVIRONMENT073_1 APPLICATION:ICMatchBooking RUN CURRENCY CONVERSION 3 SUBMITTED, 3 SUCCESS, 0 FAIL. SCRIPT RUNNING TIME IN TOTAL:4.02 s. LOG END TIME:2012-01-17 01:41:50 File path: \ROOT\WEBFOLDERS\ENVIRONMENT073_1\ICMatchBooking\PRIVATEPUBLICATIONS\NEWEPM073

Status on the log files of ICDATA package. LOG BEGIN TIME:2012-01-17 01:42:57 FILE:\ROOT\WEBFOLDERS\ENVIRONMENT073_1\ADMINAPP\ICMatchBooking\ICDATA.LGF USER:NEWEPM073 APPSET:ENVIRONMENT073_1 APPLICATION:ICMatchBooking RUN ICDATA 4 SUBMITTED, 4 SUCCESS, 0 FAIL. SCRIPT RUNNING TIME IN TOTAL:2.82 s. LOG END TIME:2012-01-17 01:42:59 File path: \ROOT\WEBFOLDERS\ENVIRONMENT073_1\ICMatchBooking\PRIVATEPUBLICATIONS\NEW Status on the log files of ICBOOKING package. LOG BEGIN TIME:2012-01-17 02:18:59 FILE:\ROOT\WEBFOLDERS\ENVIRONMENT073_1\ADMINAPP\ICMatchBooking\ICBOOKING.LGF USER:NEWEPM073 APPSET:ENVIRONMENT073_1 APPLICATION:ICMatchBooking RUN ICBOOKING 6 SUBMITTED, 6 SUCCESS, 0 FAIL. SCRIPT RUNNING TIME IN TOTAL:1.46 s. LOG END TIME:2012-01-17 02:18:59 File path: \ROOT\WEBFOLDERS\ENVIRONMENT073_1\ICMatchBooking\PRIVATEPUBLICATIO

________________________________________________________________________

01/01/2012

Dimension Structures

________________________________________________________________________

01/01/2012

________________________________________________________________________

01/01/2012

Structure of Rate Model (IC_Rates)

________________________________________________________________________

01/01/2012

Disclaimer:

This description is a preliminary version and not subject to a license agreement or any other agreement with SAP®. This document contains only intended strategies, developments, and functionalities of the SAP product and is not intended to be binding upon SAP to any particular course of business, product strategy, and/or development. Please note that this preview is subject to change and may be changed by SAP at any time without notice.

SAP assumes no responsibility for errors or omissions in this document. SAP does not warrant the accuracy or completeness of the information, text, graphics, links, or other items contained within this material. This preview is provided without a warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, or non-infringement.

SAP shall have no liability for damages of any kind including without limitation direct, special, indirect, or consequential damages that may result from the use of these materials. This limitation shall not apply in cases of intent or gross negligence. The statutory liability for personal injury and defective products is not affected.

________________________________________________

SAP Community Contributors: Author: Chief Architect: Sulthan Mohammad Jothi Periasamy SAP EPM/BPC Project Lead/Manager /Architect SAP HANA/EPM/BI/EIM Community Thought Leader SAP EPM Community Member SAP BPC/BOBJ/BI/MDM Community Domain Champion sulthan1@gmail.com Joesaran@gmail.com , (916)-296-0228 - Cell

Contact Us For:

� IC Eliminations � Ownership Calculations � Consolidation Leading Practices and Design Advisory � Minority Interest and Equity Calculations, and Much More …

Sapbpc nw 10.0 consolidations ic matching & ic booking v5

Education

Transcript of Sapbpc nw 10.0 consolidations ic matching & ic booking v5

Fiscal Multipliers and Public Debt Dynamics in Consolidations

TABL5518 CONSOLIDATIONS AND GROUP STRUCTURES · business.unsw.edu.au CRICOS Code 00098G . School of Taxation and Business Law . TABL5518. CONSOLIDATIONS AND GROUP STRUCTURES. Course

World Class Close- Not just Consolidations (with HFM)

SAPBPC NW 10.0 Transaction Data Load From File to SAP BPC V1

Consolidations 1 - Student Version

Consolidations 1

Fiscal Consolidations and Heterogeneous Expectations · 2015. 9. 10. · Fiscal Consolidations and Heterogeneous Expectations Cars Hommes a,c, Joep Lustenhouwer and Kostas Mavromatisb

Financial Consolidations,Planning and Reporting Optimization

Financial Consolidations and Currency Translation

WPR Article Consolidations Jan 2017

Consolidations and joint ventures. Academic Resource Center Consolidations and joint ventures Page 2 Typical coverage of US GAAP ► Scope ► Combined financial.

Business combinations & Consolidations

PeopleSoft Enterprise Global Consolidations 9.1 Reports€¦ · This appendix provides an overview of PeopleSoft Enterprise Global Consolidations reports and enables you to view ...

SAPBPC NW 10.0 Consolidations IC_Matching & IC_Booking V5

CONSOLIDATIONS WEEK 4 TEXT CHAP 17 & 18 CONSOLIDATIONS WEEK 4 TEXT CHAP 17 & 18.

Sap bpc nw 10.0 consolidations ( ic elimination) implementation guide v1 p

ASPE changes to consolidations and joint … | ASPE changes to consolidations and joint arrangements Consolidations What you need to know Withdrawal of AcG-15 AcG-15, Consolidation

THE PERMANENT EFFECTS OF FISCAL CONSOLIDATIONS …

FINANCIAL CONSOLIDATIONS, ELIMINATIONS, FOREIGN CURRENCY ...docshare04.docshare.tips/files/24644/246447287.pdf · FINANCIAL CONSOLIDATIONS, ELIMINATIONS, FOREIGN CURRENCY AND ...

MERGERS & OTHER BUSINESS COMBINATIONS Consolidations, Mergers & Holding Company.