Post on 25-Feb-2018
7/25/2019 Sandvik Mine Lighting Solutions.pdf
1/14
Sandvik Mine Lighting Solutions
Hella Mining Products
Enhancing safety & productivity whilereducing maintenance intervals
7/25/2019 Sandvik Mine Lighting Solutions.pdf
2/14
Hella lighting upgrades provide significant
improvements in safety, productivity and profitability
for mining equipment.
Hella products are specifically designed for mining
applications and have been proven to provide high
output, long lasting illumination in the toughest
mining environments.
All products undergo stringent independent testing which
simulate the conditions encountered on mine sites, including:
Vibration testing
Thermal shock testing
Ingress resistance
Impact testing
Photometric testing
Extensive field trialling is carried out prior to production.
For more details please contact your local Sandvik
Representative.
Madefor
Mining
Sandvik proudly offers the new range of Hella Mining Products to the market.
The Hella brand is a worldwide leader in lighting technology that experience is the
basis for lighting products designed to outperform in extreme mining conditions.
7/25/2019 Sandvik Mine Lighting Solutions.pdf
3/14
MINING WORK LAMPS
MOBILEEQUIPMENT
LIGHTING
Hella DuraRAYPhase IILED Warning Beacons
lAmber LEDlAmber Base
2 Discs LED HM9400AMB2A
3 Discs LED HM9400AMB3A
4 Discs LED HM9400AMB3A
The cast alloy construction and
modular lens design enables
DuraRAYII beacons to survive
much larger crush or impact
loads than conventional optical
beacons. DuraRAYII beacons
offer excellent beam control to
ensure very good penetration
of fog and dust without blinding
the operator through back
scatter, whilst delivering high
observability from a distance with
minimal close-up glare.
Solid state LED beacons are
gaining popularity due to their
zero maintenance and long
service life over conventional
rotating beacons, particularly
in harsh mining conditions. Thenew range of DuraRAYII LED
warning beacons build on an
award winning design with the
addition of a new electronic
control system, combined with
higher output LEDs, and further
user customisation within the
range. Higher EMC standard
ISO13766-2006 certifcation
improves safety and reliability
with other electrical devices.
Coloured secondary reflectors
were added to ensure easy
identification of LED function
colour when the beacon is inoff mode.
Using an advanced control
system gives users the
option to select from
a flashing or rotating
LED beam pattern
by simply changing
the polarity of the
two wires. The
Multivolt system
allows for installation
on electrical machines
that may have varying
outputs due to the load on
the engine. The light output rom
the high emitting LEDs is not
affected by this varying supply,
with a range o 9-33 Volts DC.
The increased light output
from the LEDs combined withmultiple layers of LEDs delivers
a high degree of redundancy
in the optical system to ensure
safety is not compromised
under partial failure or obscuring
conditions. Utilising ceramic
coated aluminium reflectors and
durable XYLEXlenses provides
excellent long-term resistance
against cleaning chemicals, UV
and impact
damage for increased durability
and long service life.
DuraRAY
II beacons arefully sealed fit and forget
products that can be submerged
and high-pressure washed from
any direction.
Hella DuraRAYII ultra durable LED warning beacons
improve on the award winning design of its predecessor.
DuraRAYII beacons are designed or mining and construction
applications where the cost of equipment down time is large
and safety is paramount.
Product features
Multivolt 9-33V DC
New electronics offerboth rotating andflashing functionality
Modular system ofcircular LED discs forintense, 360 visiblelight output
Brilliant clear, highimpact resistantXYLEXlens system
Heavy-duty cast alloybase and cap forincreased mechanicalstrength and vibrationresistance
Multi-stage paintcoating for optimalcorrosion and UVprotection
ISO 13766-2006
Flame retardant toUL94HB
Fully sealed andpre-wired to preventingress of dirt andmoisture
200G shock resistant
Low EMC signature
Low current draw
Self-diagnosticelectronics forprotection againsttransient voltage spikesand reverse polarity
LED Function colourvariants available(Amber, Green, Blue,Red and White)
Spare Parts
9.HM9386.02Installation Kit
Hella DuraRAY
Phase II
LED Warning Beacons
IP6K7 200G9 to 33
V DC
33WMAX
LEDBAREWIRE
MULTI
VOLT
111.5
130.6
132.5
130.6
153.5
130.6
159
169
25mm Pipe Thread
3 x M4equispacedon PCD 107
3 x M4equispaced
on PCD 130
3 x 6equispacedon PCD 150
3 Disc LED
2 Disc LED
4 Disc LED
7/25/2019 Sandvik Mine Lighting Solutions.pdf
4/14
MINING WORK LAMPS
M
OBILEEQUIPMENT
LIGHTING
Good lighting is
essential to create a
safe and productive
work area wheremachine operators can
clearly see their work
environment and identify
hazards in time to take the
required action. The AS500 FF
is engineered to deliver excellent
lighting under continuous use in
extreme environmental conditions.
AS500 FF lamps Hella Free-Form
optics deliver a homogenous
spread of light, so operators can
see comfortably for long periods.
Its light distribution ensures there
are no sharp transitions from light
to dark in the operators visual feld,to significantly reduce adaptation
related eye fatigue and stress.
The optical modules comprise
a precision-moulded specular
reflector, permanently assembled
to a corrosion-resistant hardened
glass refractor lens and machined
lamp holder, ensuring perfect
focus. A choice of wide and
narrow asymmetric beam types is
available. The integrated, patented
Hella MustADDfilter ensures
optimum optical performance
is maintained over product life
in the adverse atmospheres
typically encountered in mining.
35W Xenon gas discharge lighting
systems pioneered by Hella have
set the standard across the world
for optimum visual acuity and
comort or proessional work
lamp users. The integral electronic
ballast ftted to the AS500 FF
range is specifically designed for
continuous operation in mining
applications. Safe and reliable
electrical connection is via a short
length of highly flexible double
insulated cable, terminated with
DT connectors. Other connector
options can be supplied as specialorders.
An ergonomic heavy-duty cast
aluminium body with an integral
non-snag adjustment handle is
the basis o all AS500 FF lights.A robust lens retaining ring with
captive M4 Allen bolts enables
rapid routine service access from
the front, while high temperature
O-ring seals ensure eective
sealing. A UV resistant multi-stage
powder coating process ensures
optimal corrosion protection.
Accurate and stable aiming in
high vibration environments in all
assembly positions is vital. The
AS500 FF oers a range o secure
mounting options for almost any
requirement. The standard trunnion
bracket can be ftted to the body insix different mounting positions; all
of which locate the axis of rotation
in the centre of gravity to minimize
mechanical stress. Four M6 Allen
bolts in arced slots and fixed pivot
points ensure that the aiming angle
can be locked securely. Secondary
mounting holes in the base of the
AS500 FF enable direct mounting
onto equipment, or the use of
an optional pedestal bracket.
The heavy gauge stainless steel
hardware is non-resonant and
highly corrosion resistant. Integral
DRACOdampers eliminate all
metal-to-metal contact betweenthe lamp and bracket to reduce
shock and vibration transmission.
Sustainable use of resources is
ensured through the modular
system design, so users can re-
use, repair, or recycle lights into
new applications. Both beam types
and mounting bracket positions
and options can be changed.
Halogen models can also be
upgraded to Xenon and other
future options.
AS500FF Xenon is a compact and highly
versatile, ultra heavy-duty work lamp or use
on mining machinery, suitable or 24V and
12V electrical systems.
Hella AS500
FF XenonHeavy Duty Work Lamp
Spare Parts &Options
Part No.Description
HM8164
Clear Protective CoverAS500
9.HMAPEDLPedestal MountingBracket Assembly
9.HM151TRN
Trunnion MountingBracket Assembly
9.HMAWHKDCable harness kitAS500
9.HM15WBInsert Wide Optic AS200/500 GDL
9.HM15NBInsert Narrow Optic AS200/500 GDL
9.HM151BALMultivolt Ballast
XN4000Globe Xenarc D2S
Hella AS500FF Xenon Trunnion Pedestal
Wide Beam Multivolt DT HM1512WBS HM1513WBS
Narrow Beam Multivolt DT HM1512NBS HM1513NBS
Product features
Modular die cast
aluminium alloy bodyIntegral non-snaghandle
Multiple mountingoptions
Stainless steel trunnionbracket with quad boltfastening
Dracosuspension
Free-Form wide andnarrow beam optics
MustADDfilter
Captive Allen boltsDouble insulated siliconesupply cable with DTplug
Replaceableencapsulated ballast
O-ring seals
Components tested overa 40C to +105Ctemperature range
High efficiency & longlife D2S 35W Xenonlight
Multivolt operationfrom 9-33V DC
IP6K7K
200G shock resistantballast
50G shock resistantlamp
CE compliant
Protective clear covers
available
Consumable sparesinterchangeable withHella AS200FFXenonrange
Clear cover to be ordered separately
175
126
122
170
120
56
OptionalPedestalBracket
Trunnion Bracket
DRACOMUSTADD
IP6K7 50G 12/24V41W
D2SDT 2.8Kg
Shown with Pedestal Bracket
Shown withTrunnion Bracket
7/25/2019 Sandvik Mine Lighting Solutions.pdf
5/14
5
M
OBILEEQUIPMENT
LIGHTING
OptionalPedestalBracket
AS500 FF Xenon Narrow Beam
300
30
30
60
Peak 79 LUX
90 120 150
AS500 FF Xenon Wide Beam
300
30
30
60
Peak 120 LUX
90 120 150
Multi-adjustable trunnion bracket ensures accurate and stable aiming in a high vibration environment in allassembly positions. Bracket locates the axis of rotation in the centre of gravity
7/25/2019 Sandvik Mine Lighting Solutions.pdf
6/14
M
OBILEEQUIPMENT
LIGHTING
MINING WORK LAMPS
LED lighting offers a number
of decisive advantages over
conventional globe technology
that are benefcial or mining work
area lighting. The new Mining
DuraLedHigh Efficacy LED
Service Lamps consume as little
as 9 watts of power for minimal
strain on both alternator and
battery.
In addition to signifcantly
reduced current draw, the highly
efficient, low temperature LED
circuit design ensures ultra long
service life and extremely low
degradation
of performance.
Equipped with precision optics
and the most powerful LEDs
available to date, DuraLed
High Efficacy LED Service
Lamps provide exceptional
white light output and optimum
light distribution for significantly
improved work saety and
reduced fatigue.
DuraLedHigh
Efficacy LED Service Lamps
also offer superior functionalsafety and operating reliability.
Unlike Halogen globes, LEDs are
resistant to shock and vibration
and last a minimum o 10,000
hours, eliminating the risk o
sudden light failure during lamp
operation.
The lens is manuactured rom
ultra-durable Grilamidnylon, a
revolutionary high-performance
clear polyamide developed and
manufactured in Switzerland for
extreme impact, UV, chemical
and stress resistance.
DuraLedHigh Efficacy LED
Service Lamps are fully sealed
against dust and moisture ingress
and available in a range of output
intensities to suit every individual
mine lighting requirement.
Hella has developed a new range of universal, high intensity
and ultra energy efficient DuraLedLED Service Lamps
oering the industry benchmark highest efcacy or a variety
of heavy-duty mine lighting applications.
Product features
Industry benchmarkhighest efficacy - 36LEDs rated to a total of1000 lumen per lamp
Multivolt 9-33V DC
Power consumption< 9W
Ultra durable Grilamidnylon lens for extremeimpact, UV, chemicaland stress resistance
Efficient, lowtemperature LEDcircuit design ensuresultra long life and lowdegradationof performance
Wide beam precisionoptic for optimum lightdistribution
Intense white lightoutput providesenhanced work safetyand reduced fatigue
Pre-wired with 2.5metres connectingcable
Reverse polarity, spikeand over voltageprotection
Fully sealed to IP6K6and IP6K7
Resistant to vibrationand shock
EMC compliant
2-hole surface mount(screw caps andmounting bushesincluded)
Hella DuraLed
700 LumenWhite LED Service Lamp Multivolt 9-33V DC
IP6K7 200G9 to 33
V DC
5W
LED
DT&BAREWIRE
0.4KgMULTI
VOLT
SAE/ECE
COMPLIANT
Hella DuraLed 700 Lumen White LED Service Lamp
Wide Beam 2JA959037231
DuraLed 700 Lumen Wide Beam 2.5m high at 0
5 5
5
4
3
2
1
0
7/25/2019 Sandvik Mine Lighting Solutions.pdf
7/14
M
OBILEEQUIPMENT
LIGHTING
MINING WORK LAMPS
LED lighting
offers
a number
of decisive advantages over
conventional globe technology
that are benefcial or mining work
area lighting. The new Mining
DuraLedHigh Efficacy LED
Service Lamps consume as little
as 9 watts of power for minimal
strain on both alternator and
battery.
In addition to signifcantly
reduced current draw, the highly
efficient, low temperature LED
circuit design ensures ultra long
service life and extremely low
degradation
of performance.
Equipped with precision optics
and the most powerful LEDs
available to date, DuraLed
High Efficacy LED Service
Lamps provide exceptional
white light output and optimum
light distribution for significantly
improved work saety and
reduced fatigue.
DuraLedHigh Efficacy LED
Service Lamps also offer superior
functional safety and operating
reliability. Unlike Halogen globes,
LEDs are resistant to shock and
vibration and last a minimum of
10,000 hours, eliminating the
risk o sudden light ailure during
lamp operation.
The lens is manuactured rom
ultra-durable Grilamidnylon, a
revolutionary high-performance
clear polyamide developed and
manufactured in Switzerland for
extreme impact, UV, chemical
and stress resistance.
DuraLedHigh Efficacy LED
Service Lamps are fully sealed
against dust and moisture ingress
and available in a range of output
intensities to suit every individual
mine lighting requirement.
Hella has developed a new range of universal,
high intensity and ultra energy efficient DuraLed
LED Service Lamps offering the industry
benchmark highest efcacy or a variety o
heavy-duty mine lighting applications.
Product features
Industry benchmarkhighest efficacy - 50LEDs rated to a total of1000 lumen per lamp
Multivolt 9-33V DC
Power consumption< 12W
Ultra durable Grilamidnylon lens for extremeimpact, UV, chemicaland stress resistance
Efficient, low
temperature LEDcircuit design ensuresultra long life and lowdegradationof performance
Wide beam precisionoptic for optimum lightdistribution
Intense white lightoutput providesenhanced work safetyand reduced fatigue
Pre-wired with 2.5metres connectingcable
Reverse polarity, spikeand over voltageprotection
Fully sealed to IP6K6and IP6K7
Resistant to vibrationand shock
EMC compliant
2-hole surface mount(screw caps andmounting bushesincluded)
IP6K7 200G9 to 33
V DC
12W
LED
DT &BAREWIRE
0.7KgMULTI
VOLT
Hella DuraLed 1000 Lumen White LED Service Lamp
Wide Beam 2JA980604051
DuraLed 1000 Lumen Wide Beam 2.5m high at 0
5 5
5
4
3
2
1
0
Hella DuraLed
1000 LumenWhite LED Service Lamp Multivolt 9-33V DC
7/25/2019 Sandvik Mine Lighting Solutions.pdf
8/14
MINING INTERIOR LAMPS
O
S
EuroLED Touch interior lamps are
equipped with high-performance
LEDs a single white LED in the
centre of the lamp plus multiple
red LEDs arranged in a circular
pattern and highly advanced
lens optics providing a uniform
light distribution without glare for
optimum efficiency and increased
saety. The use o MultivoltTM
electronics ensures a consistent
level of brightness at any input
voltage between 9 and 33V DC,
even when subjected to severe
voltage fluctuations.
Lighting control is made easy
thanks to integral, touch sensitive
switch pads (white pad for white
light, red pad for red light) anda 4-stage dimming function with
memory. All it needs is the touch of
a finger to switch the light colour
and regulate the light intensity
to suit individual cabin lighting
requirements. When the fnger is
held on either switch pad for longer
than two seconds, the lamp will
automatically cycle through four
dimming stages until the finger is
released on the light level required.
The integrated memory unction
ensures the lamp turns on at the
light level last selected.
In addition to touch
sensitive switching,
EuroLED Touch lamps
are also suitable for
synchronised remote operation
from multiple points using
standard On/O/On momentary
switches.
EuroLED Touch lamps are shock
and vibration resistant and
completely sealed against dust and
moisture to international protection
standards for maximum durability
and increased service lie. The
unique rounded and low profile
design allows fitment into narrow
panels, whilst offering distinct
operational and safety benefits.
Compared to common fluorescent
lamps, EuroLED Touch interior
lamps will not interfere with other
electronic equipment and run
completely silent.
Product features
Dual colour LED lighting
Integral, touch sensitiveswitching
Dimming function withmemory
Multivolt 9-33V DC
Ultra low powerconsumption
Shock and vibrationresistance
Over voltage, reversepolarity and transientspike circuit protection
Low EMC signature
IP 6K6 6K7 completelysealed against dust andmoisture
IP6K7 200G9 to 33
V DC
5W
LED
BAREWIRE 0.3Kg
MULTI
VOLT
Harnessing the durability and power saving benefits of advanced single LED
technology, EuroLEDTouch interior lamps oer long lasting, dual colour LED
light output of white light for general interior illumination and the additional
function of red light to help maintain night vision (see below).
EuroLED
Touch MInterior Lamp Multivolt 9-33V DC
130
130110
30
30
13
Cable Exit
Red On
White On
Red Light and Night Vision
The human eye contains two types o receptors,
rods and cones. Both have an increased
sensitivity to frequency bands at different
ends of the visual spectrum. Rods are largely
responsible for our daytime and colour vision and have an increased
sensitivity towards the red band o the visual spectrum. In contrast
cones are responsible for our night vision capability and have an
increased sensitivity towards the blue, shorter wavelength band of the
visual spectrum. For this reason red light helps to preserve our night
vision as it will not affect the sensitivity of the cones.
Spare Parts
8HG959952022EuroLEDMountingSpacer
Mounting Spacer designed to suit allEuroLEDinterior lamps. Enables easysurface mount with side cable exit
EuroLEDTouch M Interior Lamp
with 2.5m cable HM959950031
LED
7/25/2019 Sandvik Mine Lighting Solutions.pdf
9/14
MINING SIGNAL LAMPS
9Q
LIGHTING
M
OBILEEQUIPMENT
LIGHTING
DuraLedlamps
are extremely
robust, fully sealed
truly fit and forget products,
tolerant to severe vibration levels
and very compact in design with
concealed mounting screws for
enhanced protection against
damage. All lamps are pre-
wired with multi-core sheathed
cable, fully sealed against dust
and moisture to International
Protection Standards IP6K6 and
IP6K7, and are compliant with
current SAE regulations.
The material used or these
lights includes a new generation
of acrylics which has a high
tolerance to chemicals andwashing fluids as well as an
enhanced impact resistance. This
suits vehicles frequently washed
with highly corrosive mining
chemicals.
DuraLedSAE Signal Lamps
feature low power consumption
and Multivolt circuitry, ensuring
full light output from 9 to 33 volts.
The lamps are ully sealed against
dust and moisture and may be
mounted vertically or horizontally
(2-hole surface mount and
mounting bushes supplied).
LED technology ensures the
lamps have ultra-low power
consumption (maximum 9 Watts)
for minimal strain on a vehicles
electrical system. The high quality
circuitry features reverse polarity
protection and 5.0kW Transient
Voltage Suppressor (TVS).
Lamps are sealed to IP6K6
(Protection against dust and high
pressure water jets) and IP6K7
(Protection against temporary
water immersion) standards. They
come pre-wired with integrated
DT plug or easy installation.
DuraLedlamps are equipped
with advanced clear micro optic
lenses to prevent the hazardous
occurrence of ghost signals
by internally reflected light from
other sources.
The smooth ergonomic design
and very low profile (under
35mm) allows DuraLedunits
to be installed on almost any
surface. Specially designed
nylon bushes prevent stress
fractures developing in the base,
by distributing the fastening bolt
load over a large surface area of
the base without transferring any
torque.
Tamper proo screw covers
securely lock the product into
place and simplify cleaning
by eliminating dirt-collecting
cavities.
Hella DuraLedlamps are high quality, long lasting mining signal
lamps that are ECE approved, and SAE compliant. They suit a
variety of vehicle applications and are easy to fit and durable.
The lamps incorporate the latest in LED technology or low
maintenance requirements, low current draw and ultra long
service life.
Product features
Easy installation
Variety of surfacemount options
Ultra wide optics forenhanced visibility
Low powerconsumption andMultivolt circuitry formaximum light output
Multivolt 9-33V DC(signal) SAE compliant
IP6K6 (Protectionagainst dust and highpressure water jets)
IP6K7 (Protectionagainst temporarywater immersion).
Hella DuraLed
Signal Lamps
Stop Position Turn Signal Lamps
Hella DuraLedSAE
Stop Position Rear Turn Signal (Red) 2SB980606211
IP6K7 200G9 to 33
V DC
5W
LED
DT&BAREWIRE
0.4KgMULTI
VOLT
SAE/ECE
COMPLIANT
7/25/2019 Sandvik Mine Lighting Solutions.pdf
10/14
ALARM S AND HORNS
ALARMSAND
HORNSMotoVOX
Forward 117dB Horn
MotoVOXFH117 117dB Horn
HMFH117P
Electronic forward horn is designed to be used where a
high-decibel rugged horn is necessary.
Voltage 12-24V DC
Decibel 117 @ 1.2m
Approval SAE J1105 Sept 89, Type J @ 24V systems
SAE J1105 Sept 89, Type K @ 12V systems
RA917 Self Adjusting 112dB Alarm
HMRA917E
RetroVOX
Self Adjusting Reversing Alarm
Steel housing and construction for rugged applications.
Integral bracket includes same mounting pattern with OEMs, sel
adjusting. Suitable for high pressure washing, epoxy encapsulated circuit
board protects alarm against moisture and vibration damage.
Voltage 12- 24V DC
Decibel 87 - 112 @ 1.2m
Approval SAE J994 Type D
7/25/2019 Sandvik Mine Lighting Solutions.pdf
11/14
LED BUGGY WHIPS
ACCESORIES
Technical Specifications:
Light sourceQuality LEDs in BA9 bulbholder
Voltage 12V
Power Consumption< 1W
Length1.2 metres, 2.0 metres or3.0 metres
MountingIntegrated mounting bolt onbase with snap on/off quick-release shaft for quick andeasy installation
Spare Parts:
9.HM46MPMale Pin Connector for Quick
Release
9.HM46FXReplacement Reflective CrossFlag
9.HM46MSMedium Spring
9.HM46GLLED Globe
To meet saety regulations,
mine sites often require
light vehicles to display high
visibility safety flags to
improve visibility for drivers of
heavy machinery. Mounting onto
the bumper bars of light vehicles,
these give vehicles an extra layer
of protection.
During night and poor visibility
levels the operation of light
vehicles generally requires the
use of rotating safety beacons to
improve visibility. However in mine
sites where the topological surface
contains large dips and hills, these
may not be adequate.
By combining a bright LED with a
long reflective safety flag, drivers
of light vehicles can ensure they
are always in the line of sight of
heavy machinery.
The LED module puts negligible
load on the vehicles electrical
system (less than 1W), the
shaft is constructed from a high
quality fiberglass rod, sealing
the electrical components from
weather damage. The ag mounts
to the vehicle via a quality quick
release latch allowing the flag to
be taken down when the vehicle
is o site. The cable is terminated
with a DT plug, allowing quick
removal whilst sealing the electrics
from environmental damage.
The ag contains reective UV
resistant material and the nylon
material repels the high levels of
dirt and dust often encountered in
mine sites.
LED Buggy Whip
Snap On/Off Quick Release
9.HM46FX
9.HM46MP
9.HM46MS
IP6K7 200G12V 1W
DT 0.5KgLED
LED Buggy Whip
1.2 metre HM4612
2.0 metre HM4620
3.0 metre HM4630
MULTI
VOLT
7/25/2019 Sandvik Mine Lighting Solutions.pdf
12/14
KITS
Underground Loader Packs
Underground Truck Packs
Underground Loader Ultra Pack
HM5601S
Underground Loader Basic Pack
HM5601B
Open Cab
Underground Drill Rig Pack
HM5602S
Closed Cab
Underground Drill Rig Pack
HM5602B
Exploration Drill Rig
Ultra Pack
HM5604S
Exploration Drill Rig
Basic Pack
HM5604B
Underground Truck
Ultra Pack
HM5603S
Underground Truck
Basic Pack
HM5603B
SANDVIK Atlas Copco Caterpillar
LH307 ST3.5 R1300G
LH410 ST7 R1600G
LH514 ST710 R1700G
LH517 ST1030 R2900G
LH621 ST14
ST1520
SANDVIK Atlas Copco Caterpillar
417 40 MT2010 AD30
TH320 50 MT431B AD45B
30SX TH660 MT436 AD55B
530 TH230L MT5020
533 MT6020
SANDVIK Atlas Copco
DD310 282 XL3D
DD410 E2C XE3C
DD320 M2 WE3C
DD530 L2D
SANDVIK Atlas Copco
DE710 DM30
DE740 T4BH
DE810 DM45
DE840 DM50
DE880 DML
235
Underground Drill Rig Packs
Exploration Drill Rig Packs
Kits available:
7/25/2019 Sandvik Mine Lighting Solutions.pdf
13/14
The Hella Centre o Excellence Mining
provides an Applications Engineering lighting
design service for Hella Mining customers.
The aim o this unique service is to reduce
risk to end users and OEMs o implementing
an inappropriate lighting design, enabling
all stakeholders to evaluate, comment and
change the design prior to implementation.
The Hella team combines decades o
lighting expertise across many countries
and industries with the most sophisticated
software. However, our most valuable asset
is ongoing consultation combined with
extensive practical on-site mining experience,
enabling us to understand the unique visual
and environmental requirements of the mining
industry.
We are ully aware o the wide and sometimes
conflicting range of operational requirements,
covering the need for greater equipment,
operator and maintenance personnel safety,
lowered cost of ownership and maintenance,
increased productivity requirements and the
need for a predictable
service life.
We use appropriate, proven
technologies and methods to
provide the mining operation
with an engineering-based,
application-focussed,
customised solution. The
system design not only
complies with the relevant
occupational health and
safety regulations, but also
with real life maintenance and
operational needs.
Hella lighting designs
typically include; aiming and
orientation angles, number
and type of luminaires,
part numbers, spare parts, illumination
level achieved and appropriate standards
referenced.
Our service extends to both fxed and mobile
plant lighting designs. The fnal design is
contained in a clear and concise document
that can be presented to all relevant
stakeholders, ready to be integrated into on
site maintenance documentation systems.
Our experience in Applications Engineering
allows us to create lighting designs in a short
time frame and with limited information.
Applications Engineering 13
TECHNICAL
INFORMATION
7/25/2019 Sandvik Mine Lighting Solutions.pdf
14/14
Sandvik Chile S.A.
Avenida Presidente Eduardo Frei Montalva 9990
Panamericana Norte, Km 14 1/2 Salida San Ignacio
Santiago Quilicura
14510 Chile
Ph: +56 2 676 0200Contact your local Sandvik representative
Sandvik Mining and Construction de Mexico S.A.
Peririco Sur No. 7980
Nave 1C Parc Tecnologico II
Col. Santa Maria Tequepexpan Tlaquepaque
Jal., Mxico C.P. 45600
Ph: +52 33 3601 0362
Contact your local Sandvik representative
Sandvik del Peru S. A.
Av. Deensores del Morro 1632
Chorillos, Lima 9, Peru
Ph: +51 1 213 3300
Contact your local Sandvik representative