Post on 08-Mar-2016
description
NEWS 2010NEWS 2010
© CAMP SpA All rights reserved. May 2010www.camp.it contact@camp.it
CONCEZIONE ARTICOLI MONTAGNA PREMANA
is a brand owned by CAMP SPA
ACCESSACCESS© Andrea Giazzi, Corde Access, Switzerland © PTK Equipment Ltd., Bangkok Airport, Thailand
ACCESS
Sit harness "Access Sit"
Chest harness "Access Chest"
Ventral attachment system "Access Bridge"
Rigid seat "Access Swing" Sizes: 1: S-L, 2: L-XXL (sit and chest parts);
one size fits all (ventral attachment system, rigid seat)
Weight (size 1): sit harness 1350g, chest harness 550g,
ventral attachment system 600g, rigid seat 1300g.
P.P.E. Against falls from a height.EN361 - Full body harness
(combined use of Access Sit and Access Chest)EN358 - Belt for work positioning (Access Sit)EN813 - Sit harness (Access Sit)EN813 - Sit harness (combined use of Access Sit and Access Bridge)
The first harness for prolonged suspensions made with complete modular construction, the perfect solution to get different harness configurations for any rope access job.The “Access” solution consists of a sit harness [A], a chest harness [B] and a ventral attachment system [C]. The rigid seat[D], suitable to be combined with the harness in two different ways, completes the CAMP Safety solution for rope access.
*The four components are supplied separately, together with instructions for assemblying.
Ref.1962.01
Ref.1962.02
Ref.1962.03
Ref.1963
CERTIFICATIONS
DESCRIPTION
1
B
C
A
B
A
D
2
ACCESS
POSSIBLE CONFIGURATIONS
1.
2.
3.
4.
The different configurations are:
Use of the sit harness only, for positioning applications where fall arrest function is not required;
Sit harness joined with ventral attachment system, for getting the best freedom of lateral movements, especially in tree-climbing jobs;
Combination of the chest part with the sit harness (in the configurations 1 and 2). This solution adds two fall arrest attachment points (front and back) suitable for the connection of a shock absorbing lanyard or a fall arrest device;
Connection of rigid seat for best comfort in mid-air prolonged suspensions. Possibility to connect the seat on the buckles of the sit harness, or to apply it directly to the ventral ring by means of two connectors.. Suitable to be used with configurations 1, 2 and 3.
1
3
4
2 4
A_ Sit harness "ACCESS SIT" - Ref.1962.01
1 Aluminium alloy ventral attachment ring, certified under EN813.
Fastened by a new patented webbing double loop: first loop for ring fastening and second loop to be used for the insertion of the connector of chest part “Access Chest”
2 Aluminium alloy side rings for work positioning, certified EN358
3 New connection system between belt and leg-loops:
the high distance between the connection webbings is studied for improved comfort in the groin area
4 “Speedy Alu” automatic buckles
5 Aluminium alloy belt buckles, fast adjustable and detachable
6 Patented “Sicura” buckles for fastening the “Access Swing”
7 Polyester belt webbings, 44mm wide
8 Polyester leg-loops webbings, 33mm wide
9 Leg-loops webbing reinforcement
10 Triple-layer belt padding: comfortable 3D mesh,
robust intermediate foam, additional rigid foam layer on load areas. Large contact area for pressure distribution.
11 Double density leg-loops padding: stiffer on the back for load support,
softer on the groin area for comfort. 3D mesh inside.Large contact area for pressure distribution
12 Back leg-loops connection webbings adjustable in length
13 Buckle for “Access Chest” fastening
14 Webbing loops for fastening of even 8
gear-carabiners “Hub” ref.910 (supplied separately)
15 Two rigid large side gear loops, 10kg max
16 Back gear loop, 20kg max
17 One gear loop on each leg-loop, 10kg max
18 Two small side gear loops, 20kg max
19 Two side metal rings, 20kg max
20 Webbing back loop for “First Aid Kit” fastening
21 Plastic buckle for “Access Swing” fastening when not in use
3
ACCESS
B_Chest harness "ACCESS CHEST” - Ref.1962.02
22 Fall arrest aluminium alloy rings (front and back)
certified under EN361, suitable for the connection of a shock absorbing lanyard or a fall arrest device;
23 Polyester webbings, 44mm wide
24 Aluminium alloy buckles, fast adjustable and detachable
25 Screwgate aluminium alloy connector,
fastened with steel pin in order to avoid rotation.To be connected to “Access Sit”
26 Webbing back connection system to “Access Sit”
27 Triple-layer padding: comfortable 3D mesh, robust
intermediate foam, external protective mesh. 28 Webbing system for chest ascender fastening
4
ACCESS
ACCESS
29 Polyester attachment webbing, 20mm wide,
certified under EN 813
30 Spare attachment webbing, ref.1964;
easily replaceable simply by unscrewing steel rings
31 Stainless steel connection rings
32 Polyester webbing, 44mm wide, connected to side positioning rings of “Access Sit”
33 Polyester webbing, 20mm wide,
connected to leg loops of “Access Sit”
34 Aluminium alloy buckles, used for length adjustment of
the ventral attachment system.Useful to adjust the product to any user’s size and to adjust the suspension position at any time.
5
Ref.1964
C_ Ventral attachment system “ACCESS BRIDGE” - Ref.1962.03
ACCESS
D_ Rigid seat “ACCESS SWING” - Ref.1963
35 Aluminium alloy structure for best stiffness during
suspension. Double layer padding made by foam covered by breathable 3D mesh.
36 Patented “Sicura” buckles conceived to be
connected directly to the buckles on the “Access Sit”
37 Webbing loops for the connection of the seat to the ventral
attachment ring of any EN813 harness by means of two connectors (suggested “Nano 23” ref.1189)
38 Plastic buckle for fastening the seat on
the back of “Access Sit”, when not in use
39 Side gear loops, 10kg max
40 Bottom gear loop, 10kg max
6
AIR WORKAIR WORK
© Andrea Giazzi, Corde Access, Switzerland
Sit harness "Air Work Sit"
Chest harness “Air Work Chest" Sizes: S, M, L.
Weight (size M): sit harness 530g, chest harness 350g
P.P.E. Against falls from a height. Mountaineering equipment.EN361 - Full body harness
(combined use of Air Work Sit and Air Work Chest)EN813 - Sit harness (Air Work Sit)EN12277 Type C - Sit harness for mountaineering (Air Work Sit)EN12277 Type A - Full body harness for mountaineering (combined use of Air Work Sit and Air Work Chest)
Air Work is the lightest suspension harness on the market, designed for any rope access and positioning application where extreme lightweight and comfort during movements are mandatory. Perfect for working on roofs, inclines and for short suspensions.
Formed by a sit harness [A], a chest harness [B] joined together by a new fast adjustment connection system [C].The structure of the harness combines the strength required by the fall-arrest standard with the comfort and the lightweight of a mountaineering harness.
Ventral attachment ring is made with mountaineering harness concept in order to permit the best distribution of user’s weight both on belt and leg-loops. Chest part is equipped with a fall-arrest attachment point to be connected to a shock absorbing lanyard or to a fall arrester.The chest harness can be comfortably worn when not in suspension, then the rescuer can reduce the length of the connection with the sit harness just before hanging on the hook, improving the suspension comfort.
Ref.1983.01
Ref.1983.02
CERTIFICATIONS
DESCRIPTION
1
B
C
A
B
A
AIR WORK
2
AIR WORK
A_ Sit harness "AIR WORK SIT" - Ref.1983.01
1 Attachment loop certified under EN813 and EN12777/C, made by
polyamid webbing with high visibility yellow external reinforcement. Guaranteed strength: 15kN
2 Polyamide belt webbings, 25mm wide
3 Polyamide leg-loops webbings, 20mm wide
4 Belt fast adjustment buckles made of aluminium alloy, two pieces
placed at each side of the belt for an easy and quick use
5 Leg-loops fast adjustment buckles made by aluminium alloy, placed
on the external part of the leg-loop for excellent comfort in the groin area.
6 Forged aluminium alloy ring for the connection of the chest part
7 Elastic loops provided with a small flap for an easy positioning of the
excess webbing
8 High visibility yellow stitchings
9 Ventral comfort padding
10 Four gear-loops made of polyester webbing protected by plastic tube,
working load 20kg
11 Triple-layer padding on belt and leg-loops: comfortable 3D mesh,
robust and breathable intermediate foam, external protective mesh.
12 Adjustable back elastic tapes
13 Additional binding tapes for increased belt stiffness
3
AIR WORK
B_
C
Chest harness "AIR WORK CHEST” - Ref.1983.02
16 High visibility yellow fall arrest loop certified under EN361 + EN12277/A,
conceived for the connection with shock absorbing lanyards or fall arrest devices. Guaranteed strength: 15kN
Fast adjustment connection system
17 Polyamide horizontal webbings, 33mm wide
18 Polyamide vertical webbings, 25mm wide
19 Fast adjustment buckles made by aluminium alloy
7 Elastic loops provided with a small flap for an easy positioning of the
excess webbing
8 High visibility yellow stitchings
20 Eight-shaped padding for maximum suspension comfort. Triple-layer
padding: comfortable 3D mesh, robust and breathable intermediate foam, external protective mesh
4
C
AIR WORK
AIR WORK
C_ FAST ADJUSTMENT CONNECTION SYSTEM
21 Patented “Sicura” buckle, fast adjustable and detachable.
Steel male and female portions, plastic safety intermediate part
22 Polyamide webbing loop, 25mm wide. The webbing loop can be
quickly shortened just before the suspension
16 High visibility yellow fall arrest loop certified under EN361 + EN12277/A,
conceived for the connection with shock absorbing lanyards or fall arrest devices. Guaranteed strength: 15kN
6 The forged aluminium alloy ring lets the female buckle portion pass
through, in order to detach the chest part for the use of the sit harness only
23 Elastic loop provided with a small flap for an easy positioning of the
excess webbing
24 ”OK” label for checking the right position of the buckle.
If the label is upside down (showing O), the buckle is in the wrong position.
5
K
AIR RESCUEAIR RESCUE© Tita Gianola, Italy
AIR RESCUE
Sit harness "Air Rescue Sit"
Chest harness "Air Rescue Chest" Sizes: S, M, L.
Weight (size M): sit harness 550g, chest harness 360g
P.P.E. Againt falls from a height. Mountaineering equipment.EN361 - Full body harness
(combined use of Air Rescue Sit and Air Rescue Chest)EN813 - Sit harness (Air Rescue Sit)EN12277 Type C - Sit harness for mountaineering (Air Rescue Sit)EN12277 Type A - Full body harness for mountaineering (combined use of Air Rescue Sit and Air Rescue Chest)
Harness specifically conceived for helicopter rescue operations and suitable for any kind of rescue activities.Formed by a sit harness [A], a chest harness [B] joined together by a new fast adjustment connection system [C].
The structure of the harness combines the strength required by the fall-arrest standard with the comfort and the lightweight of a mountaineering harness. The chest harness has a double-loop attachment point which allows to connect the connector of a fall-arrest lanyard and the easy and fast attachment to the hook of the helicopter hoist.
The chest harness can be comfortably worn when not in suspension, then the rescuer can reduce the length of the connection with the sit harnessjust before hanging on the hook, improving the suspension comfort.The suspension position of the human body is perfectly vertical, avoiding any rotation effect caused by the helicopter air flow.
Ref.1982.01
Ref.1982.02
CERTIFICATIONS
DESCRIPTION
1
B
C
A
B
A
AIR RESCUE
2
AIR RESCUE
A_ Sit harness "AIR RESCUE SIT" - Ref.1982.01
1 Attachment loop certified under EN813 and EN12777/C, made by
polyamid webbing with high visibility yellow external reinforcement. Guaranteed strength: 15kN
2 Polyamide belt webbings, 25mm wide
3 Polyamide leg-loops webbings, 20mm wide
4 Belt fast adjustment buckles made of aluminium alloy, two pieces
placed at each side of the belt for an easy and quick use
5 Leg-loops fast adjustment buckles made by aluminium alloy, placed
on the external part of the leg-loop for excellent comfort in the groin area.
6 Forged aluminium alloy ring for the connection of chest part
7 Elastic loops provided with a small flap for an easy positioning of the
excess webbing
8 High visibility yellow stitchings
9 Ventral comfort padding
10 Four gear-loops made of polyester webbing protected by plastic tube,
working load 20kg
11 Triple-layer padding on belt and leg-loops: comfortable 3D mesh,
robust and breathable intermediate foam, external protective mesh.
12 Large back handle, to be used by rescuers to help each other during
hovering disembark and other rescue operations. Guaranteed strength: 10kN
13 Fluorescent and reflective fabrics for a better visibility
14 Adjustable back elastic tapes
15 Additional binding tapes for increased belt stiffness
3
AIR RESCUE
B_
C
Chest harness "AIR RESCUE CHEST” - Ref.1982.02
16 High visibility yellow fall arrest loop certified under EN361 + EN12277/A,
conceived for the attachment to the hook of the helicopter hoist. Guaranteed strength: 15kN
17 High visibility yellow fall arrest loop certified under EN361 + EN12277/A,
conceived for the attachment of a fall arrest lanyard. Guaranteed strength: 15kN
Fast adjustment connection system
18 Polyamide horizontal webbings, 33mm wide
19 Polyamide vertical webbings, 25mm wide
20 Fast adjustment buckles made by aluminium alloy
7 Elastic loops provided with a small flap for an easy positioning of the
excess webbing
8 High visibility yellow stitchings
21 Two gear-loops placed on armpit zone, perfect for placing the terminal
connector of a lanyard when not usedWorking load 20kg
22 Eight-shaped padding for maximum suspension comfort. Triple-layer
padding: comfortable 3D mesh, robust and breathable intermediate foam, external protective mesh
13 Fluorescent and reflective fabrics for a better visibility
4
C
AIR RESCUE
C_ FAST ADJUSTMENT CONNECTION SYSTEM
23 Patented “Sicura” buckle, fast adjustable and detachable.
Steel male and female portions, plastic safety intermediate part
24 Polyamide webbing loop, 25mm wide. The webbing loop can be
quickly shortened just before the suspension
16 High visibility yellow fall arrest loop certified under EN361 + EN12277/A,
conceived for the attachment of the hook of the helicopter hoist. Guaranteed strength: 15kN
17 High visibility yellow fall arrest loop certified under EN361 + EN12277/A,
conceived for the attachment of a fall arrest lanyard. Guaranteed strength: 15kN
6 The forged aluminium alloy ring lets the female buckle portion pass
through, in order to detach the chest part for the use of the sit harness only
25 Elastic loop provided with a small flap for an easy positioning of the
excess webbing
26 ”OK” label for checking the right position of the buckle.
If the label is upside down (showing O), the buckle is in the wrong position.
5
K
Full body harness with 5 attachment points: 2 front, 1 back, 2 side.
Ergonomic back padding designed for superior comfortAluminium alloy components, fast adjustment bucklesNew system for attaching a chest ascender. 2 Sizes
GOLDEN TOP EVO FIXE ALURef. 941.06
21/04/2010
NEW PATENT!Attachment system between the chest and waist that allows the user to attach and detach the connector
quickly and easily
Areation holes
Reflectiveparts
High strength polyester webbing 44mm
Aluminium connectorStrenght: 24 kN
Ergonomic 3D meshback padding
Fast adjustmentaluminium buckles
Chest ascender fastening system
Forged Aluminiumpositioning D-rings
Gear-loops
Forged Aluminiumfall arrest D-rings
Back webbings adjustable in length
Reinforcedwebbings
CE labelprovided with serial number
EN 361EN 358EN 813
2 SIZES1: S-L
2: L-XXL
1700 g
Positioning double lanyard (fig.1).Connection ring assures maximum strength in all directions (22kN).Any connector En362 can be assembled with.Suitable also for use together with an absorber En355 (fig.2).Can be also used as single lanyard (fig.3). Version with connectors included available (ref.2041.02)
DOUBLEXRef. 2041.01
EN 354
105 gForged aluminium alloy ringAble to be connected to a En813 harnessor to a En355 absorber by means of a quick link or connector
Long lanyardTotal length: 60cm
High strength polyamid stitchingsBreaking load 22kN
20/04/2010
Short lanyardTotal length: 30cm
Rubber layerfor fastening of connector
a b c d
FIG.1FIG.2 FIG.3
Double layer webbingPolyamid, width 16mm
CE labelprovided with serial number
Positioning double lanyard (fig.1).Connection ring assures maximum strength in all directions (22kN).Equipped with two connectors Ref.995.Suitable also for use together with an absorber En355 (fig.2).Can be also used as single lanyard (fig.3). Version without connectors available (ref.2041.01)
DOUBLEXRef. 2041.02
EN 354
355 g
Forged aluminium alloy ringAble to be connected to a En813 harnessor to a En355 absorber by means of a quick link or connector
Long lanyardTotal length: 70cm
Double layer webbingPolyamid, width 16mm
High strength polyamid stitchingsBreaking load 22kN
20/04/2010
Short lanyardTotal length: 40cm
FIG.1FIG.2 FIG.3
Connector Ref.995High strength aluminium alloyBreaking load 35kNOpening 23mm
CE labelprovided with serial number
Fall arrest lanyard.Length adjustable from 115 to 170cm.Constructed with strong low-stretch rope 12.5mm.Supplied with Shock Absorber ref.2029.Any En362 connector can be assembled with (total lenght 2m maximum).
SHOCK ABSORBER ADJUSTABLERef. 51301.01
EN 355
540 g
Shock Absorber ref.2029Made with 44mm polyester webbingMaximum peak force 6kNMaximum extension (fall factor 1) = 90cmMaximum extension (fall factor 2) = 160cm
Low-stretch kernmantel ropeChrome 12.5mm - Ref. 1760Polyamid - Breaking strength 38kN
Zinc plated oval ringCarbon steelAllows the easy adjustment of the length(from 115 to 170cm)
High strength polyamid stitchingsBreaking load 22kNProtected by plastic transparent layer
19/04/2010
CE labelprovided with serial number
++
Fall arrest lanyard adjustable in length.Total length adjustable from 145 to 200cm.Constructed with strong low-stretch rope 12.5mm.Supplied with Shock Absorber ref.2029 and connectors ref.981 and ref.2017
SHOCK ABSORBER ADJUSTABLERef. 51301.02
EN 355
1.2 kg
19/04/2010
Shock Absorber ref.2029Made with 44mm polyester webbingMaximum peak force 6kNMaximum extension (fall factor 1) = 90cmMaximum extension (fall factor 2) = 160cm Low-stretch kernmantel rope
Chrome 12.5mm - Ref. 1760Polyamid - Breaking strength 38kN
Zinc plated oval ringCarbon steelAllows the easy adjustment of the length(from 145 to 200cm)
High strength polyamid stitchingsBreaking load 22kNProtected by plastic transparent layer
Oval screw connector Ref.981Zinc plated carbon steelBreaking load 25kNOpening 16mm
Safety hook Ref.2017Zinc plated carbon steelBreaking load 25kNOpening 53mm
CE labelprovided with serial number
Extremely durable positioning lanyardconstructed from 12.5mm polyamide static rope.Length is adjustable up to 200cm.Equipped with aluminium alloy connectors.
ROPE ADJUSTER ALURef. 2031.01
26/04/2010
EN358
710 g
CE markingprovided with serial number
High strengthpolyamid stitchings.Breaking load 22kN.Plastic protectionlayer.
Aluminium connectorDouble safety lever systemBreaking load 30kNOpening 23mmRef.995
Tubolar protectionwebbing
Stitched endLow-stretch rope EN 1891/APolyamide, diameter 12.5 mmRef.1760 - ChromeBreaking load 38 kN
Easy-to-useadjustment device
Oval aluminium connectorTriple lock closure systemBreaking load 20kNOpening 16mm
Extremely durable positioning lanyardconstructed from 12.5mm polyamide static rope.Suitable for positioning on roofs and inclines.Available in three lengths of rope:Ref. 2031.03 - 5 metresRef. 2031.04 - 10 metresRef. 2031.02 - 20 metres
ROPE ADJUSTER 5-10-20m Ref. 2031.02 - 03 - 04
27/04/2010
EN358
EN 795
Tubolar protectionwebbing when using the rope s anchor around a structure
CE markingprovided with serial number
Easy-to-useadjustment device
Low-stretch rope EN 1891/APolyamide, diameter 12.5 mmRef.1760 - ChromeBreaking load 38 kN
Stitched end
High strengthpolyamid stitchings.Breaking load 22kN.Plastic protectionlayer.
Super strong and wear resistant 11mm static rope will meet the demand of any rigger.
Supplied with strong stitched loop at each end.Available in 9 different lengths: 5, 10, 15, 20, 25, 30, 40, 50, 60 metres.
TITANIUM 11mmWith stitched ends
27/04/2010
EN1891A
High strengthpolyamid stitchings.Breaking load 22kN.
11 mm
Diameter
2900 daN (kg)
Static strength
2050 daN (kg)
Strength with Figure 8 Knot
15 (100 kg.)
Number of Factor 1 Falls
5,60 kN
Impact Force
Factor 0.3
2,8%
Elongation 50/150 kg
0,8 %
Sheath
slippage
73 g.
Weight(g/m)
36 %
SheathPercentage
4 %
Shrinkagein Water
Polyamide
Material
TITANIUM 11 - TECHNICAL DATA
Ref. code Length
1901 10 m1900.5 5 m
1902 20 m
1903 30 m1902.5 25 m
1904 40 m1905 50 m1906 60 m
1901.5 15 m
Abrasion resistantplastic protection layer.
Protectivemetal thimble
High strength anchor loops (45kN).Certified as temporary anchor device En795/B and lanyard En354.Made by main inside webbing covered by protective webbing sleeve.
Available in four different versions: Ref.2034.060, length 60cm, weight 110g ; Ref.2034.080, length 80cm, weight 140gRef.2034.120, length 120cm, weight 200g ; Ref.2034.160, length 160cm, weight 270g
TRUCK LOOPRef. 2034
EN795/BEN 354
High strength polyamid stitchings
21/04/2010
CE labelprovided with serial numberOuter protective
webbing sleevePolyamid, width 28mm
Innermain webbingPolyamid, width 25mm
Orange colour of main webbingis a damaging indicator of the outer sleeve
45 kN28 kN2x45 kN
Adjustable anchor webbing, strength 25kN.Certified as temporary anchor device En795/B and lanyard En354.Made by robust polyester webbing and zinc plated carbon steel components.Length adjustable from 80 to 130cm.
EASY ANCHORRef. 2035.130
Robust polyester webbingWidth 44mm, thickness 3.1mm
21/04/2010
CE labelprovided with serial number
Large attachment ringZinc plated carbon steel
Length adjustment buckleZinc plated carbon steel
High strengthpolyamid stitchings
EN795/BEN 354
25 kN
2x25 kN
410 g
Fully adjustable anchor webbing, strength 19kN.Certified as temporary anchor device En795/B.Made by robust polyester webbing and zinc plated carbon steel components.Length adjustable up to 150cm.
SPEED ANCHORRef. 2036.150
Robust polyester webbingWidth 44mm, thickness 3.1mm
21/04/2010
CE labelprovided with serial number
Large attachment ringZinc plated carbon steel
Large attachment ring comprising easy adjustment buckle Zinc plated carbon steel
High strengthpolyamid stitchings
EN795/B
430 g
2x19 kN
19 kN
Temporary Lifelineis a portable temporary anchor device for the installation of a flexible horizontal anchor line.Temporary Lifeline is conceived for the utilization of two people maximum.Adjustable length from 5 to 30 meters. Utilization without intermediate anchors is possible and certified.Intermediate anchors each 5m are suggested for more safety.
TEMPORARY LIFELINE 30mRef. 1095.01
EN795/B
5m L 30m
21/04/2010
< 5m
End structural anchor
Intermediate structural anchor
EN 362 Connector
EN 795 15 kN
CE labelprovided with serial number
Polyester webbing 50 mmStrength 60 kN
Polyester webbing 35 mmstrength 30 kN
Reinforcedend loops
Oval Connector Ref.981Zinc plated carbon steelBreaking load 25kNOpening 16mm
Anchor loops Ref.1040Polyamid webbinglength 60cmBreaking load 22kN
Tensioning systemZinc plated carbon steel
3.5 kg
L
F
P
PF (cm)
L
5 m
18 m
100kg 200kg
70 90
150 250
30 m 224 398
Smart Backpack is a compact and high-capacity backpack, with modularinternal organisation, specially designed for emergency and first aid use.
Equipped with modular bags to contain all the equipment needed for any medical rescue situation.Outer dimensions: 36x30x64 cm
SMART BACKPACKRef. 1980
4.3 kg
29/04/2010
Padded ergonomicshoulder straps.Adjustable in length.
Easyly detachablemultiuse bag
Usefultop handle
StrongYKK® zips
Pocket containingrain cover
FluorescentCordura 1000Dupont®.Waterproof.Abrasionresistant.
Pocket fordocuments
Reflective stripesprotected by plastic film
Reflectivepiping
ReflectiveInternationalRescue Symbol
SMART BACKPACKRef. 1980
Hypalon pocketfor emergency scissors
29/04/2010
Pocket for long itemssuch as tubes for aspiration
Transparent poliurethanepockets for general medical instrumentsand medication items
Velcro tapesfor bags fastening
Five modular bags made fromrobust polyester fabric.Completely padded for protection of items contained.
SMART BACKPACKRef. 1980
29/04/2010
MULTIUSE BAGEasily detachable from the top ofthe backpack by means of two fastbuckles.Composed by two pockets with transparent double-zip opening andcentral detachable flap with elastictools holders.Designed to be used as pediatric bag or portable defibrillator bag.
DRUGS - SYRINGES BAGDivided in two parts:
DRUGS (yellow)Drugs section made by two flaps that can contain each: 20 ampules on one side and 32 on the opposite side.One of the two flaps is detachable by means of metal snaps.Both flaps are equipped each side with drug name tag holder.Bag is also equipped with one pocket for other kind of drugs.
SYRINGES/VENFLON (red)Syrynges and venflon section composed by one transparent pocket with double-zip opening and one elastic pocket.Designed to contain and protect a large quantity of syringes and venous cannulas.
SMART BACKPACKRef. 1980
29/04/2010
INTUBATION (red)Composed by one transparent pocket with double-zip opening;one flap with two elastic pockets and 6 net pockets with velcro opening.Designed to contain one laryngoscope, five blades, endotracheal tubes andall the accessories needed forintubation.
VENTILATION (blue)Made by two transparent pockets withdouble-zip opening; perfect to houseambu-bags, face masks and other necessary items, such as airways and tubes for connecting oxygen bottles.
INFUSION (orange)Equipped with one transparent pocket with double-zip opening, one flap with three elastic pockets andtwo elastic stripes for big bottles.Perfect for carrying the different kindsof infusion bags, bottles and accessories.
Large, comfortable and waterproof 40 litres PVC backpack.Ideal to carry all the equipment for work at height and rope access jobs.The new triple-zip system allows to open the backpack in both vertical and horizontal positions.Suitable to be carried by shoulder straps (vertical position) or by handles (horizontal position).Dimensions: 19x31x55cm.
ROX WORKRef. 1961
23/04/2010
1150 g
Elastic meshpocket
Pocket withzip closure
“Daisy chain”gear loops
Zip pocket
Name tag pocket
Compressionstraps
Top handle
Padded backwith central areation system
Ergonomic paddedshoulder straps
Triple zip closure system
Strong gear loops Velcro flap
Large handles
Cylindrical shaped backpacks.Made from strong PVC material. The best solution for carrying ropes.Cordlock closure and padded shoulder straps. Two versions: 25 litres (ref.1987) and 45 litres (ref.1988).Dimensions: 22x26x60cm (ref.1987), 29x33x68cm (ref.1988).
CARGORef. 1987 - 1988
23/04/2010
700 g(25 L)
950 g(45 L)
Padded and adjustableshoulder straps
Large cordlockopening system
Name tag pocket
Strong and waterproofPVC fabric
Strongbottompart
Top handle
Large and strong travel packs.The best solution to carry all the technical equipment when working away.Can be carried as a duffle bag or backpack, constructed mainly from waterproof materials (PVC) to keep contents dry.Two versions: 70 litres (ref.1985) and 90 litres (ref.1986).Dimensions: Ø37x58cm (ref.1985), Ø40x70cm (ref.1986).
MESA WORKRef. 1985 - 1986
23/04/2010
1.3 kg(70 L)
1.5 kg(90 L)
Padded and adjustableshoulder straps
Name tag pocket
Double layerreinforcedbottom
“Daisy chain”gear loops
Hand-carrying straps
Compressionstraps
Large handles
Large zip openingable to be padlocked.Internal mesh pocket
Nylon duffle bag conceived for carryingpersonal protective equipment: harness, lanyard, helmet.
Dimensions: Ø22x48cm.10 litres.
NYLON BAGRef. 1984
23/04/2010
100 g
Adjustablewebbing strap
Name tag pocket
Cordlock closure
Lightweightnylon fabric
Simple and useful PVC backpack and bag.Constructed from strong PVC fabric.Ref.970 - 30 litres backpackRef.971 - 15 litres bagDimensions: Ø30x55cm (ref.970), Ø23x43cm (ref.971).
PVC PACK & PVC BAGRef. 970 - 971
23/04/2010
400 g(15 L)
800 g(30 L)
Waterproof closure system
Outside hood closureand inside cordlock
Top handle
Padded and adjustableshoulder straps
Strong andwaterproofPVC fabric
Name tag pocket
Waterproof bag set (3pcs), compact and light for personal gear protection.Suitable to be attached to rope access harnesses to carry and protect personal items (i.e. mobile phone, documents, first-aid kit).
Dimensions : 25x50cm (large), 22x29cm (medium), 18x25cm (small).
DRY BAGS SETRef. 1863
23/04/2010
84 g
Plastic buckle
Waterproofclosure system
Lightweight waterproofpolyethylene fabric
Supplied withhand-size bag
Aluminium alloy connectors with large opening, ideal for knots.
Bet-lock closure avoid the rope to snag.Available in three different versions: screwgate (ref.1136), twist lock (ref.1183), twist lock evolution (ref.1184).
HMS BET LOCKRef. 1136-1183-1184
EN 362EN 12275
20/04/2010
Breaking loadsGate closed: 24kNGate open: 8kNMinor axis: 8kN
Opening: 23mm
Screwgate versionWeight 79gAvailable in three colours:- Polish-blue: ref.1136.01- Blue: ref.1136.03- All black: ref.1136.04
Twist lock version (double automatic movement)Weight 84gAvailable in two colours:- Polish-blue: ref.1183.01- Blue: ref.1183.03
Twist lock evolution version (triple automatic movement)Weight 85gAvailable in two colours:- Polish-blue: ref.1184.01- Blue: ref.1184.03
Aluminium alloy oval connectors, ideal to be used with descenders and ascenders.Bet-lock closure avoid the rope to snag.Available in three different versions: screwgate (ref.1115), twist lock (ref.1185), twist lock evolution (ref.1187).
OVAL COMPACTRef. 1115-1185-1187
EN 362EN 12275
26/04/2010
Breaking loadsGate closed: 24kNGate open: 7kNMinor axis: 10kN
Opening: 16mm
Screwgate versionWeight 71gAvailable in two colours:- Polish-red: ref.1115- All-black: ref.1115.03
Twist lock version (double automatic movement)Ref.1185.01Weight 75g
Twist lock evolution version (triple automatic movement)Ref.1187.01Weight 76g
High strength carbon steel connectors.Bet-lock closure avoid the rope to snag.
Available in three different versions: screwgate (ref.1877), twist lock (ref.1877.01), twist lock evolution (ref.1877.02).
“D” STEEL CONNECTORSRef. 1877-1877.01-1877.02
EN 362
03/05/2010
Breaking loadsGate closed: 52kNGate open: 18kNMinor axis: 15kN
Opening: 24mm
Screwgate versionWeight 250g
Twist lock version (double automatic movement)Weight 270g
Twist lock evolution version (triple automatic movement)Weight 280g
High strength carbon steel cval connector.Bet-lock closure avoid the rope to snag.
Twist lock closure (double automatic movement) for best safety.
OVAL STEEL CONNECTOR 2TRef. 1878
EN 362
04/05/2010
Breaking loadsGate closed: 30kNGate open: 9kNMinor axis: 15kN
Opening: 17mm
200 g
Anchor loop EN795BRef. 1040.65Breaking load 22kN
RESCUE PROCEDURE
1. Attach the anchor webbing above the rescuer and victim;
2. Connect the carabiner to the victim and lock the descender
3. Lift the victim by means of the block-and-tackle hoist
4. Detach the victim’s lanyard;
5. Rappel the victim to the ground by means of the descender
Supplied in waterproof andabrasion resistant PVC bagsRef.1880 - 15l bagRef.1881 - 30l backpack
Low stretch rope EN1891/ATitanium 11mm ref. 1758
A rescue kit designed for lowering victims after a fall from height.The rescuer attaches the victim to the block-and-tackle hoist and lift the victim.Then he detaches the victim’s lanyard before rappelling to the ground using the Axel descender.Maximum rescue height: 25m (ref.1880) or 50m (ref.1881). Maximum lifting height: 1m.All components are CE certified PPE.
RESCUE KIT EVORef. 1880 - 1881
Components
5 kg(25m)
23/04/2010
7.5 kg(50m)Double pulleys
EN12278Ref. 1097Brass bearing movement
Rope clampEN567Ref. 550
Axel double lockingdescenderEN341Ref. 1686
Lever lock connectorEN362Ref. 995Breaking load 35kNOpening 23mm
1 2
Tripod Evo is a temporary transportable anchor device.
Tripod Evo is suitable for the utilization combined with Rescue Lifting Device ref.284.
TRIPOD EVORef. 1883
EN795/B
17.3 kg
20/04/2010
CE labelprovided with serial number
130 c
m to
228 c
m
Ø23cm
Telescopicaluminium alloylegs
Rotatingfeet
Connectionsteel chain
Strong aluminium head with fourattachment points
TECHNICAL DATABreaking load: 22kNWorking load limit: 500kg
Rescue lifting device ref.284may be easily installed(Cable length:20m Breaking load: 18kNWorking load limit: 180kg)Supplied separately together with pulley and connectors
Premium goatskin leather gloves, perfect for any rope access use and work at height in general.
Available in five sizes: S, M, L, XL, XXL.
AXIONRef. 1879
66 g (size L)
14/05/2010
Double leather layerin high wear areas
Soft rubber protection parts on knuckles
Carabiner hole for attachment to a harness
Terry fabric
Stretch nylon partson back for flexibility
Heavy Lycra fabric fourchettes
Double kevlar stitchingon the palm
Neoprene wristwith Velcro closure