S800H Hybrid Operator

Summary

S700H bug fixing

New S800H

Lever manual release

Hydraulic manual release

BUG FIXING

REPORT: Encoder disc – broken teeth

SOLUTION: New encoder disc

REPORT: Water seepage inside the encoder housing

SOLUTION: New Encoder RESIN protected

BUG FIXING

SOLUTION: POSITIVE STOP has been modified

REPORT: POSITIVE STOP fall out of their seat

BUG FIXING

REPORT: Pin fall out from fixing gracket and screews get lose

SOLUTION: Fixing bracket is modified, blind holes

BUG FIXING

REPORT: motor fixing bracket brackes

SOLUTION: Motor with integrated flange

BUG FIXING

REPORT: Oil leakage by the feeding pipe

SOLUTION: New, longer, pipe

BUG FIXING

SOLUTION: New Hydraulic Release

SEGNALAZIONE: little set-up margin if the box is not properly in position

BUG FIXING

Summary

S700H bug fixing

New S800H

Lever manual release

Hydraulic manual release

NEW S800HThe new S800H integrates all modifications applied in time to the

previous S700H

It can be easily recognised by the handles and electric motor cover in red colour

Summary

S700H bug fixing

New S800H

Lever manual release

Hydraulic manual release

SELLING POINTS

1 Ease of installation

2 Ease of use

3 Retro-fit

HYDRAULIC MANUAL RELEASE

1 Ease of installation

The release is directly fixed to the foundation box and connected to theoperator through two flexible pipes.

The release is COMPLETELY independent from the leaf and thereforephase between splined coupling and operator

2 Ease of use

The release (body totally aluminium made) is physically out of thefoundation box, this makes it possible to operate it from inside or outsideof the property.

The key release (metal key as standard) is protected by a rubber cover

3 Retro-fit

The height dimensions of the New Hydraulic Release and of the NewSplined Collar allow the installation (as replacement) on sites in whichis actually present the Lever Manual Release.

It’s sufficient to use the drilling template provided into the packaging, drill the holes on the foundation box, remove lever release and fix the New Hydraulic Release.

At present, all foundation boxes in our stocks already have the fixing holes.

4 Dimensions

The installation of CBAC operators commonly requires a manual release device.Lever release or Hydraulic Release have the height from the floor level.

LEVER RELEASE HYDRAULIC RELEASE

4 Dimensions

The installation of SB operators commonly requires only the splined collar.Two splined collars are available:-short: to have the leaf closer to the floor level-High: to have more space between leaf and floor level (this is the same collar needed to install the New Hydraulic Release).

SHORT HIGH

Summary

S700H bug fixing

New S800H

Lever manual release

Hydraulic manual release

Part Numbers and release devices configuration

1 Part Numbers and configurationsManual Release device for S800H CBAC operators:

lever manual release (P/N 390878)

or

Hydraulic release NEW (P/N 390035) +

splined collar NEW (cod.390972)

The SB operators do not require any release device, but only a splined collar to withstand the leaf:

short splined collar (P/N 390887)

or

High splined collar NEW (P/N 390972)

Product Availability

June 2011

(waiting BETA –TEST feed-backs)