Post on 10-Apr-2020
+
Press to run scene
MySunset turns ONlights at sunset.
Reduces all dimmable lights to 80% to save power.
Master Scenes
Scenes allow you to set your aircon, lights and other items the way that you want them from a single button.
All Master scenes except MyEco can be edited from your wall mounted touch screen by pressing the Edit (pencil) button.
Favourite (starred) Scenes appear on the Home screen. You can choose up to 4 favourite scenes. These 4 Scenes can be a mix of Master Scenes and your Custom Scenes.
Set a Favourite Scene by pressing the star icon next to the Scene button.
Tip: When you add a new scene, the scene setup will match how your house is currently set, except for garage door and blinds which are not selected by default.
MyWelcome MyGoodbye
MyEco
Days Scene will run
Days Scenewill not run
Custom Scene name Edit button
Time Scenewill run
Selected as Favourite
Not Selected asFavourite
Press to edit scene
Custom Scenes
Favourite Scenes
MyAir, MyLights and MyPlace share a common scene page where you can customize aircon, lights and other items using the same scene.
Setting the SceneCustom Scenes are your user created Scenes and can do the following when run:
set your aircon and zones - turn aircon ON/OFF - change the temperature, aircon mode & fan speed - enabled/disabled zones, motion sensor & Fresh Air - change your MyZone
set your garage door, blinds and other items - switch ON/UP/OPEN; - switch OFF/DOWN/CLOSED
set dimmable & normal lights - switch light ON/OFF - change the brightness level
Setting the TimeCustom Scenes can be scheduled to run in certain days and time. When a schedule is enabled, the time and days will be displayed in your wall mounted touch screen.
Creating a SceneCustom scenes are created by pressing the plus button in your wall mounted touch screen. You can have up to 12 Custom Scenes.
In the popup box, select what you want to include in the scene and then press the add button.(only applicable if you have more than one tab)
See the Scene Editor help page for more info.
Editing a SceneCustom Scenes can be edited by pressing the pencil (edit) button.
See the Scene Editor help page for more info.
Movie Time
10:00 PMM T W T F S SBed Time
Bed Time
Movie Time
Movie Time
Selected De-selected
Scenes
MyPlace
MyAir
MyLights
Use your wall mounted touchscreen to add and personalise your scene.
Scenes
Scene Editor
Ticked buttons are included in the scene
Tip: Be sure to save changes when you have finished editing. To exit without saving changes press the back button.
Tip: The MySunset scene will run each day at the sunset time shown. To stop the scene from running, the scene can be disabled.
Scene Name
Scenes allow you to set your aircon, lights and other items the way you want them from a single button.
Press the white text box to edit the Scene name.
Press to edit if you want to add/remove MyPlace, MyAir or MyLights in this scene.
Press to untick button. Unticked buttons will be ignored when the
scene run.
Press the zone to set which zone will be enabled/disabled
when the scene runs.
Press to set the motion sensor of the zone.
Press the temperature icon to set MyZone
Press to set the temperature or airflow of the zone.
Press to set the aircon to turn ON/OFF.
Press to set the aircon mode
Press to set the aircon’s
temperature.
Press to set the aircon’s fan speed.
Press to return to previous page
without saving.
Press to edit location
Select the time that you wish
the Scene to run.
Select the time that you wish
the aircon to stop.
Press to save and return to
previous page.
MyTime is enabled
Press to edit the Start and Stop time.
The start and stop time of the scene.
Scene will run on selected
days.
Scene is enabled.
Scenes can run automatically by setting a time in the “Set the Time” window. From this window you can select the time and which days you want the Scene to run. This scene can be enabled or disabled at any time using the enable/disable button.
MyTime allows you to slowly turn on the dimmable lights at a set time.
MyTime
ACMode
Zones
22°
cool heat fan dry
low medium high auto
100%Kitchen
22°Theatre
24°Master Bed
25°Bed 1
24°Bed 2
23°Bed 3
26°Dining
95%Hallway
80%Lounge
75%Laundry
Press to return to Scenes page.
Changes are NOT saved.
de-select check-box to exclude items from the Scene.
Unticked buttons will be ignored when the scene runs
Set the Scene
Set the Time
Save, Delete or Run Now
back Movie Time
Garage
Pool ONOFF Pool Cover OPENCLOSE
Blind 1 Blind 2
help
MyTime
saverun now
Mytime is enabled.
Mytime is disabled.
Press on the days you wish the Scene to run.
Start time:
cancel ok
Set the time
Stop time:(Aircon only)
1 15 am
2 30 pm
3 45
:
4 15 am
5 30 pm
6 45
:
Saves & Runsthe Scene.
Deletesthis Scene.
Savesany changes.
Highlighted button indicates status of the item
MyTime
Patio Flood light
Lounge KitchenDining
Back Right Spotlight 2Spotlight 1
Front Left Back LeftFront Right
Theatre
Outdoor
Press to change the state of the item
Living
Press the centre of the light buttons to change the state of the light
Press to adjust the brightness of the light
For the chosen lights that are dimmable and set to ON, these lights will ramp up gradually.
For the chosen lights that are not dimmable,these lights will switch ON at the set time.
For Other Buttons, they are not affected and will change the state at the set time.
Set the Scene
The “Set the Scene” window shows you what your Scene will do when it runs.
NOTE: The selected myzone only works when the temperature control option is set to myzone.
Set Location (MySunset scene)
set location
1. Select a country
2. Enter your 4 digit post code
3. Press Save
Start time: 8:00 AM
AC Stop time: 5:00 PMenable disabled
Press to stop the scene automatically running at the start
time.
T W S ST FM
MyTime