Post on 07-Apr-2018
8/6/2019 Reports for Week 3 n 4
1/31
WEEK 2: HEALTH INDUSTRY
DIABETES
Diabetes is known as disorder of metabolism. Most of the food people eat is broken
down into glucose, the form of sugar in the blood. Glucose is the main source of fuel for the
body. There are two type of diabetes, Type one diabetes is where the immune system attacks
and destroys the insulin thus requires a person to inject insulin daily to live. Type two
diabetes, this form of diabetes is most often associated with older age, obesity, family history
of diabetes, previous history of gestational diabetes, physical inactivity, and certain
ethnicities. About 80 percent of people with type 2 diabetes are overweight. Its basically a
condition in which cells fail to use insulin properly. Thus they had come out with GlucoM
Writstband its basically an medical concept for diabetics, comes as a pleasing exception. The
trendy gadget, other than securing instant and non-invasive glucose readings, a history of
previous readings with averages and an insulin chamber with a loaded syringe cartridge for
injections, also doubles as a fashion accessory for diabetics.
WEEK 3: HEALTH INDUSTRY
IMMUNE SYSTEM AND CANCER
Immune system is basically known as a system of biological structure and processes
within an organism that protects against diseases and bacteria. Cancer is known as abnormal
cells grow which is out of control. Nano robotics is the technology of creating machines or
robots at or close to the microscopic scale of a nanometre. This device becomes an adjunct to
its owner from birth to death. Other than that the device proposes the use of nabobs inside the
blood stream with a third party device to be active as a supplementary immune system, this is
basically how this concept works does.
Cancer robot test is a device to test cancer. The cancer robot test size is like anendoscopy pills, it can be swallowed, it also has senses tumour in this system, it will projects
1
8/6/2019 Reports for Week 3 n 4
2/31
the image on the screen like ultra sound images. Breast cancer scanner from Z- tech helps
detect cancers earlier. Z-Tech's Breast Cancer Scanner is a nifty device that measures changes
in electrical resistance in the breast in order to detect tumours. Z-Tech's 12-petaled breast-
screening device attaches to a woman's breast and sends a mild electric current into the tissue.
Higher impedance, or electrical resistance, in one breast indicates the likely presence of
cancer.
WEEK 4: HEALTH INDUSTRY
HEARING ADI
A hearing aid has three basic parts: a microphone, amplifier, and speaker. The hearing
aid receives sound through a microphone, which converts the sound waves to electrical
signals and sends them to an amplifier. The amplifier increases the power of the signals and
then sends them to the ear through a speaker. EL-EGANCE is a hearing device that can be
worn in each ear; its also a ring control unit and a display case as well. Definite style is
basically design for men, its also double jewellery and hearing aid and severe hearing
damage has a plug that makes it powerful. This hearing aid can be used for hush is an
equipment used to cancel out unnecessary noise, its also has a remote, u can actually charge
this hearing aid in your phone, This hearing aid can also play melody and has alarm in it.
WEEK 5: HEALTH INDUSTRY
Endoscopic capsule
Capsule endoscopy is a way to record images of the digestive tract for use in
medicine. The capsule is the size and shape of a pill and contains a tiny camera. After a
patient swallows the capsule, it takes pictures of the inside of the gastrointestinal tract. The
primary use of capsule endoscopy is to examine areas of the small intestine that cannot be
seen by other types of endoscopy such as colonoscopy or esophagogastroduodenoscopy
(EGD). This type of examination is often done to find sources of bleeding or abdominal pain.
WEEK 6: HEALTH INDUSTRY
Magneto-encephalography
2
8/6/2019 Reports for Week 3 n 4
3/31
Magnetoencephalography (MEG) is a technique for mapping brain activity by
recording magnetic fields produced by electrical currents occurring naturally in the brain,
using arrays of SQUIDs (superconducting quantum interference devices). Applications of
MEG include basic research into perceptual and cognitive brain processes, localizing regions
affected by pathology before surgical removal, determining the function of various parts of
the brain, and neuron feedback. It picks up the magnetic field generated by the neurons every
time they are active. The procedure being that simple. A psychology professor used female
students to undergo this test. They however where not aware. The professor proved this to be
80% accurate. The test laid the results and predicted the future relations success rate.
WEEK 7: HEALTH INDUSTRY
AlarME Watch
This alarme watch was design by Nikita Golovlev, This watch is not only great
looking but it is designed to be used by the hearing impaired. It will basically vibrate, and
alert the person wearing it, for example if a fire alarm goes off which they would not be able
to hear they would be notified immediately. The watch has two built in multi-directional
microphones that measure the surrounding ambient sound levels. Once the sound changes
frequency, the vibrating alarm alerts the user that there is a situation going on and they need
to leave the area. The price is affordable although it is not cheap, its about $ 380.
WEEK 8: HEALTH INDUSTRY
Joint treatment
3
8/6/2019 Reports for Week 3 n 4
4/31
JoinMAX is a new medical treatment device incorporating far-infrared rays to sooth
muscles around the knee cap. With the wavelength between 700-50000nm, JoinMAX
delivers thermal energy deep into the knees, relieving the pain around the knees and
improving the involved symptoms quickly. The innovative knee-muscle pain reliever,
JoinMAX gets thermal energy infiltrating deep into the knees by thermal radiation of halogen
lamp and infrared lamp, mitigating pains of the knee muscles quickly. Ergonomically
designed, JoinMAX deploys thermal cathodes properly suitable for the knee structure so that
thermal energy is effectively infiltrated deep into the knees as worn. This constantly improves
symptoms. The surface of thermal cathodes is made of the purest silver of which thermal
conduction is so high, from which thermal energy is quickly delivered deep into the knees as
the natural antibacterial and antibiotic reactions are also delivered. Since a temperature
controller with memory unit is attached to JoinMAX, a proper temperature is regulated from
45 degrees Celsius to 65 degrees Celsius, constantly helping to maintain the temperature.
WEEK 9: HEALTH INDUSTRY
WG-20 WAISTE SUPPORT
Revolutionary traction belt for the support and treatment of the herniated lumbar disc.
The Disk Dr. Features a unique air pocket expansion system that helps combine both
effective treatment and the relief of pain. It provides secure mechanical support for the
lumbar vertebrae. The traction belt acts to provide a buttress action between the lower part of
the rib cage and a patients hip diverting weight-bearing forces away from the lumbar spine
and thereby reducing intra-discal pressure. The function of the Disk Dr. is to help resume the
appropriate position of the nucleus or the intervertebral disc by reducing the pressure between
lumbar vertebrae by broadening the gap between lumbar vertebrae through the air pressure
within the precise and scientific belt. It combines support, flexibility and comfort.
For those who participate in sports or have an active life-style. the Disk Dr. allows a
high degree of mobility while at the same time providing security for the weakened lumbar
spine. Air injection nozzle, the automatic air inflation device prevents air leaks. Its 100%
cotton lining where it will products skin and diminishes sensitive skin problems.
4
8/6/2019 Reports for Week 3 n 4
5/31
WEEK 10: HEALTH INDUSTRY
MEDICAL TOURISM
Is a term used a agencies and media to describe practice of movement due to medical
conditions, The purpose of medical tourism are for cardiac surgery, dental surgery, cosmetic
surgery, surgeries and also joint replacement such as knee and hip. Type of medical tourism
are patient flying to a specific country for medical purpose, doctors going abroad to give their
services to people, share their skill with other doctors , for education to study medicine,
medical Services are cheaper in some countries and also some countries are known for
particular expertise. For example Lithuania is expert in Hematopoietic stem cell
transplantation, which helps cancer patients and people with blood diseases, They also do like
gastric bypass and back surgery, Turkey was ranked as the best for eye treatments like Lasik
surgery, India is good in Ayurvedic treatments, yoga, and meditation have long been staples
of Indian medical tourism and also known for cheap treatment, Israel provide low-cost cancer
treatment centres. Once that marrow transplant takes, you can recover with special
therapies that use Dead Sea mineral salts and so on.
WEEK 3: FOOD AND BEVERAGES INDUSTRY
THE MOST EXPENSIVE COFFEE IN THE WORLD
Kopi Luwak the most expensive coffee in the world does exist, and those who drink
the expensive coffee insist that it is made from coffee beans eaten, partly digested and then
excreted by the Common palm civet, a weasel-like animal. Civet coffee is basically came
from an animal called Paradoxurus, they normally eats cherries and bean. Once the bean is
digested then it will excrete. A civet eats the berries for their fleshy pulp. In its
stomach, Proteolysis enzymes seep into the beans, making shorter peptides and more
free amino acid. These beans yield an aromatic coffee with much less bitterness.
WEEK 4: FOOD AND BEVERAGES INDUSTRY
SNACK FOODS
A snack is a portion of food oftentimes smaller than that of a regular meal, butoccasionally much larger. Examples of snack food are potato chips, candy, twisties, popcorn,
5
8/6/2019 Reports for Week 3 n 4
6/31
chocolate chip cookie and so on. Basically industry has grown at a modest pace, with
continued product innovation and the increasing amount of consumers who are snacking
more frequently contributing to its recent growth. As consumers become more health-
conscious and seek out healthier bites, the industry's major players are taking the opportunity
to expand their offerings to include low-fat and low-calorie snacks.
WEEK 7 : Cement industry
Introduction of cement
Basically cement is a fine, soft, powder type substance. It is made from a mixture of
elements that are found in natural materials such as limestone, clay, send and shale. Element
which is needed to make a cement are calcium (which is the main ingredient) can be obtained
from limestone, silicon is achieved from sand and clay and aluminium. The technology &
process of making cement are as following, first is the quarry stage where the limestone is
taken from a quarry. It is the major ingredient needed for making cement. Some small
quantities of sand and clay are also needed. Limestone, sand and clay contain the four
essential elements required to make cement. There are four essential elements are calcium,
silicon, aluminium and iron. Secondly is the proportioning , blending and grinding where
size limestone rocks are transported from the quarry to the cement plant and fed into a
crusher who crushes the boulders marble-size pieces. The third one is preheater tower the
limestone pieces then go through a blender where they are added to the other raw materials in
the right proportion.
Forth stage is kiln; the raw materials are ground to a powder. This is sometimes done
with rollers that crush the materials against a rotating platform, after that everything then
goes into a huge, extremely hot, rotating furnace to undergo a process called "sintering".
Sintering means: to cause to become a coherent mass by heating without melting. In other
words, the raw materials become sort of partially molten. The raw materials reach about2700 F (1480C) inside the furnace. This causes chemical and physical changes to the raw
6
8/6/2019 Reports for Week 3 n 4
7/31
materials and they come out of the furnace as large, glassy, red-hot cinders called "clinker".
They actually use the machine to fasten up the cement process.
WEEK 8: Manufacturing industry
Wrist Watch
A Watch is small timepiece, typical worn either on the wrist or attached on a chain
and carried in a pocket, with wristwatches being the most common type of watch used today.
How to make wrist watch, first get stuff organized, and then Stretch out the cloth and watch
parts. Put the cloth down carefully and tack the ends down with some duct tape so the cloth
doesn't move. Make sure you have all the watch parts before taking out the works. If you skip
the tape step, you may end with stuff all over the floor when you start messing with the
cleaning supplies, after that, clean the parts, next Drop in the crystal. Turn the watch over so
the face is flat on the towel and drop in the crystal. The crystal should sit solidly in the frame.
If it doesn't, it may need a replacement. It may also need a tiny bit of glue to stay in place.
Rather than gob a bunch of glue on to begin with, put everything together and test things,
then put in the works, after that add the seals, then put on the watch back, finally Put on the
strap. How to assemble a wrist watch is easier sometimes than putting on the strap, especially
vintage watches with retractable metal pins.
WEEK 9: Manufacturing industry
How to Assemble a Laptop
Laptop assembly is a complicated process, can be made easier if you don't have to
completely build the machine from the ground up. When assembling a new laptop computeryou will start with a bare bones system that already has the motherboard and battery
7
8/6/2019 Reports for Week 3 n 4
8/31
connected to the case. First consider the primary function of your new laptop. Think of
whether you will be using the computer for work or gaming, and how often you will be using
it away from home. Select a bare-bones system that has the screen size and expansion ports
that meet your needs. Second Take note of the number of RAM module slots it has and the
type of processor socket it uses, third Acquire a processor that matches the socket type on the
motherboard. Pick a hard drive that has enough space to hold the software you will be
installing and then buy the RAM modules for the laptop. Acquire a wireless network card if
the bare bones system does not come with one. Forth turn the bare-bones laptop case over so
that you can see the bottom half of the case. Remove all of the screws on the case. Pull off the
plastic pieces held in place by the screws that cover the RAM ports, hard drive port, network
card port, and DVD drive port. Fifth Slide the CD or DVD drive into the open port on the left
side of the laptop. Reattach the screw to hold it in place. Push the hard drive into the open
port on the lower-left end of the case. Put the plastic piece back on and reconnect the screw.
Sixth Line up the notches on the bottom edge of the RAM modules with the keyed holes on
the RAM ports. Seventh Insert the wireless card into the open port on the right side of the
case, eighth turn the laptop case over and lift open the LCD screen lid, ninth lift the keyboard
off of the case and set it aside, tenth place the heat-sink unit that came with the processor on
top of the processor, finally put the battery into the open port on the bottom of the laptop.
WEEK 10: Manufacturing industry
Rollei telephoto lens for iPhone 4
Modern mobile phones can be used as cameras but some of them miss a telephoto
lens. But the Apple iPhone 4 now has a Rollei 8x telephoto for 50 dollars. Rollei has just
announced the launch in April, in the European market, of their new manual focus lens for
8
8/6/2019 Reports for Week 3 n 4
9/31
the iPhone 4. Weighing only 45 grams, the Rollei 8 x telephoto lenses can focus from 3
meters on has a scale with 10, 20, 30 and 40 meters markings and is the necessary equipment
to get distant things closer. Rollei states that distant subjects are now enlarged and clearly
visible making this lens ideal for paparazzi, nature enthusiasts and anyone with an eye for
detail. The lens is delivered with a miniature tripod, a special mount for the iPhone 4, and a
hard case for the phone.
WEEK 3: INFORMATION TECHNOLOGY INDUSTRY
THOSHIBA GLASSES LESS 3DTV, REGZA GL1 SERIES TV
Toshiba might have abandoned OLED, but that doesn't mean the company is lacking
ambition in the display-making field. Toshiba has basically launched the world's first 3D
glassless 3D television in Japan on 22nd December 2010. Today it's using CEATEC 2010,
Japan's biggest electronics expo, to make official that 21-inch glasses-free 3D prototype
we've been hearing about. It's lost an inch in becoming a retail product; with the 20GL1
offering a 20-inch diagonal, but the important multi-parallax picture transmission (employing
a lenticular lens setup as used in Philips' Dimenco) remains the same. The new set,
accompanied by a smaller 12GL1 model, will be shipping in Japan 22nd December, and if it
really does what it promises, the rest of the world should not be far behind. If u observes in
this glass the images will look more realistic because the eye catches more details from its
corners which are not visible through glasses. Basically each screen has 8.29 million pixels
(which is four times the number of pixels in a conventional HD television) the screens are
organized into groups of nine pixels of each colour. The nine lenses split the light from each
bank of pixels and send it to nine points in front of the Television.
WEEK 4: INFORMATION TECHNOLOGY INDUSTRY
KINECT FOR XBOX 360 BY MICROSOFT
Kinect brings games and entertainment to life in extraordinary new ways without
using a controller. Imagine controlling movies and music with the wave of a hand or the
9
8/6/2019 Reports for Week 3 n 4
10/31
sound of your voice. With Kinect, technology evaporates, letting the natural magic in all of us
shine. Basically you are the controller for this game and entertainment, there is no gadgets
and no gizmos, its basically just you. This is based on a webcam-style add on peripheral for
the Xbox 360 console,its a 3D camera allowing the gamer to use their whole body as the
controller, full body motion sensitive technology that allows gamers to do what they want
without holding on to any hardware, the concept was revealed at E3 (Electronic
Entertainment Expo) in 2009. Kinect was launched in North America on November 4, 2010.
Kinect will actually respond to how you move. It also has the ability to be able to recognize
you and access your avatar automatically. Other than that uses an advanced entertainment
technology to respond to the sound of your voice. This kinect will Connects others with easy
and interactive game play and video chat with friends on Xbox Live or Windows Live
Messenger (MSN ), it is also capable of tracking up to six people at one time, has the ability
to scan real world objects and incorporate them into games area required to play Kinect is
roughly 1.8 meters.
WEEK 5: INFORMATION TECHNOLOGY INDUSTRY
Windows 8 or Windows 365
As we all know Microsofts spending a lot of time and money making this OS a lot
slicker, faster and more efficient than Windows XP, Windows Vista or Windows 7. Now they
going to come out with windows 8, its basically a new strategy to capture video game
market. It is expected to be released before October 2013.what is the different between the
other OS and windows 8, the web browser, the internet Explorer 10 as default browser, it has
Windows media player 13, Microsoft could ensure systems are updated (without reboot).
Basically Windows 8 Biometrics Integrated with Kinect, uses a proximity sensor to
detect movements, when u wake up your PC then when you sit at the system, it will scan your
face and log you in, it can store multiple user accounts biometrics, advantage would be
parental control, as u see even kids discovers username and password they won't be able log
in without facial recognition. In Microsoft word, the user can write up to fourteen different
languages. They also have an Windows 8 Smart Card support, basicallt a smart card thatholds details of a card holders identity and Personal Identification Number (PIN), this smart
10
8/6/2019 Reports for Week 3 n 4
11/31
card will be more secure than a password where the intruder needs both the physical card and
knowledge of the PIN to gain access to the OS.
WEEK 6: INFORMATION TECHNOLOGY INDUSTRY
Apple Ipad 2
Apple has just made its second-generation iPad official; It features a 1GHz dual-core
A5 chip and, finally has cameras both on the front and rear. The new CPU is said to be up to
twice as fast, with graphics performance up to nine times better than on the original iPad,
while power requirements have been kept the same. It is a new design and its now 33%
thinner and up to 15% lighter, The iPad's most noticeable missing feature to do, a new front-
facing camera would enable Face Time, iPad 2 is basically include a USB port, iPad Smart
Cover designed for iPad, LED-backlit display (9.7 inches of high-resolution), current iPad
memory sizes are 16GB, 32GB and 64GB, so a 128GB seems likely, dual core chip faster
performance, iOS 4- the worlds most advanced mobile operating system, Multi-Touch where
everythings at your fingertips, instantly transforms your taps, swipes, pinches, and flicks into
lifelike actions. Battery life is, consequently, unaltered, with Apple promising 10 hours.
WEEK 7: INFORMATION TECHNOLOGY INDUSTRY
Sony Ericsson FH concept phone
Sony Ericsson Concept phone designed by Du Jun known as the FH Concept. The FH
is the worlds first dual flip phone- with both vertical and horizontal flips. The phone is made
up of two touchscreen portions which have equal thickness. Flipping it vertically makes it
like a regular flip phone and the bottom touchscreen acts as a numeric keypad. Flip ithorizontally and the two touchscreens get combined into a larger and wider touchscreen for
11
8/6/2019 Reports for Week 3 n 4
12/31
watching videos, web browsing etc. The two parts of the phone can be split up and used as
intercoms or walkie-talkies via the Bluetooth function.
WEEK 8: INFORMATION TECHNOLOGY INDUSTRY
Sonys next generation wrist worn projector computer
Hiromi Kiriki designed for Sonys next-generation wrist-worn computers with wrist-
worn type, who are able to hold a ring worn on the wrist by a similar procedure to make it a
screensaver that an activity of the decorations like a watch, its completely flexible to shape
around your wrist, 2020 is the target date for release even at night can Hyun get flash blind
the eyes of others and when required, they can expand into a Tablet PC. In addition, when itis in tablet mode, can also be embedded in the keyboard and touch screen input in two ways,
and screen output, which can be displayed through the display can also be carried out through
the built-in big screen projector display. Basically nextep updates whenever it is set to charge,
the power packs can last up to 2 days without charge and if it turns off when it is dead, there
is always a resume option available, it can also be connected via Bluetooth to your phone so
that the nextep can also display your text messages, this nextep computer also shows time
that you can select up to 7 different time slots for 7 different countries. We can actually
watching avi movies, listening to music (windows media player, and other downloadable
players from sony), surfing the net (emails), supports adobe reader for eBooks in this wrist
worn projector computer.
WEEK 3: AUTOMOBILE INDUSTRY
Armoured Multipurpose Vehicle
The Armoured Multi-Purpose Vehicle (AMPV) is a 4x4 vehicle family in the 5 to 9
ton weight class developed by KMW and Rheinmetall to meet the German army
requirements for protected vehicles, known as GFF program. AMPV will offer protection
against ballistic threats using add-on armor modules, Improvised Explosive Devices (IEDs),
and landmines. The first prototype is expected to roll-off in 2009 and serial deliveries areplanned for 2011 onwards. The design of this car is the patrol version will have an armoured
12
8/6/2019 Reports for Week 3 n 4
13/31
cabin and unprotected load space, it has power pack at the front, a four door armoured cell in
the middle, the compact dimensions and very high protection levels of the AMPV will make
it suitable for police and security. Basically the vehicle can be fitted with a FLW 100 / 200
remote control weapons station on the roof, a self-supporting cell made of armour steel and
composite armour, and integrates spall liners and reinforced flooring, also has extra ballistic
protection, and are powered by a 3.2l diesel engine.
WEEK 4: AUTOMOBILE INDUSTRY
CARBON MOTORS E7
The Carbon E7 is designed to address the unique operating requirements demanded
by first responders across the United States. This "ground-up" approach ensures that Carbon
Motors will be the leader in delivering an authentic law enforcement vehicle with best-in-
class performance and durability at significantly lower operating costs. Basically the main
reason of designing E7 is to protect and Serve, basically this car can be used in any
interagency solutions, this car also have a material and positive effect on every town, city,
county, state, airport, college campus, port, street, high value target, and highway across the
country.
Other than that is threat detection, where to protect against both foreign and domestic
threats, utilize weapons-of-mass-destruction sensors and automatic license plate recognition.
The other purpose to build this car is purpose-Built, it is world's first purpose-built law
enforcement patrol vehicle, fire departments, emergency medical services and also mail
carriers all operate task-specific vehicles. Carbon's E7 players a role as a new homeland
security platform upon which modern communications systems may be deployed to act as a
node for more effective and reliable interoperability.
WEEK 5: AUTOMOBILE INDUSTRY
13
8/6/2019 Reports for Week 3 n 4
14/31
Honda CBR600RR
The Honda CBR600RR Engine is a 599 cc (36.6 cu in) sport motorcycle that was
introduced by Honda in 2003 as a race replica version of Honda's CBRFx series motorcycles.
It won every Supersport World Championship title from 2002 to 2008. Dual Stage Fuel
Injection (DSFI) with 40mm throttles bodies, Denso 12-hole injectors. There are three colour
available, yhey are pearl Orange,Black, and Leyla but all colours have silver swingarms.
WEEK 6: AUTOMOBILE INDUSTRY
Jaguar XF
The Jaguar XF (type (X250) is a mid-size luxury car produced by British car
manufacturer Jaguar Cars. The car, which replaced the Jaguar S-Type, was launched at the
2007 frankfurt motor show following the public showing of the C-XF concept in January
2007 at the North American International Auto Show. It was basically designed by Jaguar's
design director Ian Callum, Its expected to be far superior to its predecessors. The
specifications of this car are, it is able to fully loaded with 5.0-liter V8 engine, its also
capable of producing up to 385 hp, other than that able to produce about 470 hp of power,new adaptive dynamics suspension, 6-speed automatic transmission system, blind-spot
monitoring system, rear view camera, unique new 20-inch wheels, new front end design with
revised chrome air intakes, and also aerodynamically functional rear spoiler and side sills.
WEEK 7: AUTOMOBILE INDUSTRY
LEXUS LF-A ROADSTER
This car was basically designed by Toyota after years of painstaking research and
development. Carbon Fibre Reinforced Plastic for the car's chassis and body as it offered
even greater weight savings than did aluminium. Moreover the Japanese automaker says
CFRP is four times stronger than aluminium yet netted a 100kg weight savings, other than
that its supercars, the LFA will be highly customizable, with buyers able to choose from 30
standard paint colours or delete standard equipment such as the car's audio system. The
specification of this car are, it has two seat roadster, it also has front-mid-engine, rear-mid-
14
8/6/2019 Reports for Week 3 n 4
15/31
transaxle, The engine is V10 (under 5.0-liters), The net result of Toyotas efforts is a vehicle
that can accelerate from zero-to-60 in just under 3.7 seconds, with a top-speed of 202mph.
WEEK 8: AUTOMOBILE INDUSTRY
Aptera 2e
The Aptera 2 Series is high-efficiency passenger three-wheeled automobile produced
by Aptera Motors; Aptera came from Greek words which mean wingless. The California-
based company is currently allowing residents of California to pre-order the car, which is in
the final stages of the design process.The first variant of the 2 Series slated for production is
the Aptera 2e (formerly Typ-1e), a battery electric vehicle, charge time of 8 hours. Aptera
claims the 2e will accelerate from 0 to 60 mph (0 to 97 km/h) in less than 10 seconds, and be
capable of reaching a top speed of over 85 mph (137 km/h).A later variant will be the Aptera
2h (formerly Typ-1h), a plug-in hybrid electric vehicle. According to Aptera, the 2 Series will
be priced from the mid-$20,000s to mid-$40,000s, depending on the variant and options
selected by the buyer.
WEEK 9: AUTOMOBILE INDUSTRY
Hyundai Veloster
The Hyundai Veloster is a compact sport coupe set to begin sales in the January
2011. Hyundai states the production model is to receive a direct-injected 1.6 liter 138 hp (103
kW), 123 lbft (167 Nm) (4,850 rpm) torque, 4-cylinder engine. A 6-speed manual gearbox is
standard while a 6-speed dual-clutch transmission (DCT) with paddle shifters is also
available as an option. The DCT transmission is developed by Hyundai and is the first dual-
clutch transmission from the company. The Veloster will achieve an estimated 40 mpg-US
(5.9 L/100 km; 48 mpg-imp) fuel economy, but does not yet have an official EPA rating. A
15
8/6/2019 Reports for Week 3 n 4
16/31
turbocharged version will be available later on. The car includes 17 inch wheels and 4-wheel
disc brakes as standard features. A turbocharged 1.6 Gamma GDI was introduced in the 2011
Seoul Motor Show. It generates 208 hp at 6,000 rpm with 195 ft-lbs of torque from 1,600-
5,000 rpm.
WEEK 4:LOGISTIC INDUSTRY
LASERTRUCK
Automated logistics systems provider, Dematic Northern Europe, has introduced
Voice PLUS Laser Trucks at the Logistics Link show in Doncaster, UK, with a fully
operational demonstration of this case picking solution. The solution combines Laser Trucks,
driverless trucks upgraded with industrial grade laser guidance and safety features, with
Voice picking, to deliver the maximum picking productivity possible in manual warehouses.
By eliminating the non-value added tasks associated with a typical case picking operation,
Voice+ Laser Trucks have the potential to double picking productivity, while retaining the
flexibility of manual systems. By using this lasertruck they will be able to increase in picking
productivity,increase in order accuracy, it also has high flexibility, ease of upgrading and
optimizing manual system,it can improve operator safety, reduced product damage and also
reduce truck and rack damage .
If we are using this LASERTRUCKR, then we will be able to reduce energy
consumption, reduce noise in the work environment, basically has real time transport and
picking management, its also flexible to changing operational requirement and applicable to
new and existing sites.
WEEK 5: LOGISTIC INDUSTRY
PACK MOBILE AUTOMATED GUIDED VEHICLE
16
8/6/2019 Reports for Week 3 n 4
17/31
An automated guided vehicle or automatic guided vehicle (AGV) is a mobile robot
that follows markers or wires in the floor, or uses vision or lasers. They are most often used
in industrial applications to move materials around a manufacturing facility or a warehouse.
PAGV are flexible and affordable basically for transport, delivery blood specimen,
prescription optic, packages and boxes. It was specifically design for fast deployment, easier
modification and low cost operation. A place where PAGV are useful are like in processing
centre, medical labs, check processing centre, clean room, hospital, and electronic assembly
areas. PAGV produces visual and audible warning to alert a person that its about to arrive at
location. This is practical useful when its not possible to stop the PAGV within sight. The
pack mobile will not operate when its off the guide path. PAGV is able to carries 1000ibs,
capacity on level surfaces, tow 1800ibs. Total combined payload 2800ibs. The Speed 100 feet
per minute, and the runtime are 10 hours at full charge over level surface.
WEEK 6: LOGISTIC INDUSTRY
Mailmobile Automatic Mail Delivery AGVs
Mailmobiles are light duty automated guided vehicles that automatically deliver mail
from the central mail centre to various workstations in single and multi-story office buildings.
Basically they use mailmobile to deliver interoffice physical correspondence, enhance
efficiency, boost productivity, drive automation, cut labour costs, increase consistency,
precision and timeliness, reduce traffic and also minimize capital outlay. Mailmobile
automates mail handling flexibly and affordably. It is a better alternative to manual methods
17
8/6/2019 Reports for Week 3 n 4
18/31
or centralized drop-offs. Mailmobile starts and ends its day in the mail centre and efficiently
transports mail directly from place to place, allowing your staff to focus on mail preparation
and sorting.
WEEK 7: LOGISTIC INDUSTRY
AGVs ROBOT AT RUSH UNIVERSITY MEDICAL CENTER
A fleet of robots is now rolling through the supply chain tunnels underneath Rush
University Medical Center transporting linens, supplies and trash. Rush has acquired 14
automated guided vehicles (AGVs), mobile robots that can move supply carts around
campus. Once programmed and activated the AGVs travel on their own without human
assistance along designated paths guided by lasers. The carts are placed in a parking area an
employee presses a button that calls for an AGV and the AGV comes to that location, slides
underneath the cart, picks up the cart and takes it to wherever its supposed to go.
WEEK 8: LOGISTIC INDUSTRY
FIRST AMERICAN-BUILT (EPS M10) HOVERCRAFT
First American-built advanced composite hovercraft of its size and calibre. This
hovercraft is built at the company facilities in Titusville, Florida. It is launched in late 2010,
It is basically uniquely designed by non-corrosive, fibre-reinforced advanced composites. The
reason they choose m10 hovercraft is because its low weight this will advanced composite to
improve performance and payload capacity, High tensile strength they actually use Kevlar
and carbon fabric- weight optimized design, other than that there is no corrosion this will able
18
8/6/2019 Reports for Week 3 n 4
19/31
to stand up to high and low temperature environment, it is also energy absorption it can
basically absorbed without damage, it also has repair ability its ease to repair by semi-skilled
worker and trained crew. Other than that it also has low noise and vibration (advanced
composite is an energy absorbing material), comparison thermal conductivity (low coefficient
of heat) its carbon fibre which can withstand 1650 Celsius and it also has life-cycle costs
(compensates the upfront investment over the long run so that competitive price can be
maintained).
WEEK 9: LOGISTIC INDUSTRY
Hybrid Automated Guided Vehicles
The Hybrid Egemin Guided Vehicle (E'gv) provides fully automatic laser guidance
and manual material handling transport within manufacturing, warehousing and distribution
environments. The Hybrid E'gv increases productivity and profitability through on-time
product delivery, zero product and facility damage and increased safety. The benefit of
hybrid automated guided vehicles are, its basically fully automatic and manual operation,
automatic trailer loading and unloading, standard off-the-shelf man-aboard base truck, user-
friendly operator controls, local service in major US cities, uses standard forklift batteries and
manual operation capability eliminates system downtime due to unforeseen events. The
hybrid AGV comes regular with industrial lead-acid batteries, laser navigation, advanced
laser safety systems, graphical touchscreen monitor, Windows OS on solid state drive (SSD)
media and wireless communication.
WEEK 10: LOGISTIC INDUSTRY
Tugger Automated Guided Vehicle (AGV)
Tugger AGVS also known as Tug, corecon has an individual tugger to meet your
specific needs. The new designed top of the line Eagle E275 Tugger AGVS are capable of
pulling loads up to 20,000 lbs in a very small vehicle platform. Corecon has also developed
an imperceptible motion drive unit option for the E275 automated tugger that allows it travel
at less than 1" per minute for aircraft moving assembly production line applications.
Moreover for smaller load requirements E210 FlexCart automatic tugger agvs are cost
effective solutions for towing loads under 3,000 pounds. All tugger automatic guided vehicle
19
8/6/2019 Reports for Week 3 n 4
20/31
systems can be retrofitted with various accessories such as scissors lifts, roller conveyors,
automatic tow hitching devices, and opportunity charging shoes to fit your specific needs.
WEEK 3: Skin Care Industry
Hexagon Aroma C Spa Shower
Hexagon Aroma C Spa Shower has basically eight special features, such as remove
chlorine, filters off impurities, provides vitamin C, generates negative ions, aromatherapy,
small water molecular clusters, increases water pressure & saves water consumption, and
easy to install. The benefit of using hexagon aroma C spa shower is it will removes 99.9%
chlorine, vitamin C content is equivalent to the vitamin C of 3,000 lemons, generates 400,000negative ions per cc of water and increases the water pressure 1.5 times for spa- like effect &
saves up to 36000 litres of water per year. Each part of the hexagon aroma C spa shower has
its own functions such as FIR (Far Infrared Rays) Energy Beads, they basically produce
smaller water molecular cluster for better absorption into skin. The patented triangle hole
spray plate basically generates 400,000 negative ions per cc of water. The vitamin C cartridge
basically has vitamin C content which is equivalent to the Vitamin C of 3,000 lemons, it also
removes 99.9% of chlorine. The non-woven fabric will basically filters out floating substance
and rust.
WEEK 5: SKIN CARE INDUSTRY
PhytoBar from Lelan Vital
Basically ordinary facial cleansers can irritate your skin, but the good thing that the
PhytoBar doesn't. PhytoBar basically cleans away dirt, make-up, oil and sebum, it also
reduces acne, whiteheads and blackheads, they also exfoliates thick, dulling layers of skin, it
brightens your face Evens out skin tone and its 100% natural, no artificial colours, scents or
preservative. The special thing about this shop is the PhytoBar is enriched with 18 herbs used
for centuries in traditional Eastern medicine, specifically because of their unique skin-
healing abilities.
20
8/6/2019 Reports for Week 3 n 4
21/31
WEEK 6: SKIN CARE INDUSTRY
Bioglo Rose Essence Sleeping Mask
The night-time hours are perfect for restoring your skin with intensive moisture and
nourishment. Bioglo Rose Essence Sleeping Mask is a specialized cream-gel mask applied
just before bedtime. It drenches your skin with Rose Water essence and nutrients from Aloe
Vera, Olive & Ginkgo Biloba extracts and Grape Seed oil to intensively moisturize and
nourish skin while you sleep. Its light, aromatic Rose scent creates a perfect state of
relaxation and tranquility for a good nights sleep. Basically rose essence is a strong
astringent agent and antioxidant that helps stimulate blood circulation, soothe and protect
skin. Its delicate scent claims and rebalances the mind.
WEEK 7: SKIN CARE INDUSTRY
Narcissus Total Defense Make up Removing Mousse
NARUKO Narcissus Total Defense Make up Removing Mousse is a brand new
makeup remover that transform traditional oil-base remover to a mousse one for fresh and
comfortable makeup removal. Once it contacts water, it emulsifies and removes all traces of
impurities makeup in pores without leaving skin dehydrated. Your skin feels fresh and
purified. The way to use this product is pump 3 times first to dispense a proper amount to
palm then later on massage over face and emulsify with drops of water. Please take note to
pay extra attention to T-zone to prevent the appearance of acnes.
21
8/6/2019 Reports for Week 3 n 4
22/31
WEEK 8: SKIN CARE INDUSTRY
OGUMA Men Triple Protect Essence
OGUMA Men series is specially designed skin care products for men, emphasized
simple, fast, good absorption, including cleaning, moisturizing, Renew, repair get a variety of
skin problems, so that men more stylish. After the facial wash, then take proper amount and
apply gently to the face, and increase consumption on part of face which needed. Crystals &
ions make water molecules penetrate or absorb into the underlying skin deeply. As long as
the skin is supported with enough water content, the skin will be youthful naturally.
WEEK 3: INFORMATION TECHNOLOGY INDUSTRY
CYBERTECTURE MIRROR
Cybertecture mirror is an interactive miracle mirror display, Wi-Fi and Android, it is
also an elegant mirror for everyday use, touch of a button, it comes to life right in front of
your eyes and also reflective surface displays information. The Cybertecture Mirror is also a
thin device designed for wall-hanging in bedroom, bathroom, living room, lobbies, lifts and
practically any other space to deliver its reflection and information. Its simple design matches
the aesthetics of any setting. This mirror has many functions, such as mirror display; the
Cybertecture Mirror is a reflective mirror with programmable applications and digital display
for the home, office and public environments (hotels, hospitals, retail shops).
Other than that it is also connected to internet, the cybertecture mirror is seamlessly
connected with the internet via wireless communication technology. Moreover it has an
digital interface, the cybertecture mirror is a visual reflective display to augment your
reflection with interactive information and can be customised for specific functions.
Its also an user control, the cybertecture mirror can be used in an active or passive
mode, controlled via its remote control (included) and/or smartphones (optional). Passively,
the cybertecture mirror remains as an everyday reflective mirror. Actively, the cybertecture
mirror interacts with users by delivering useful information as well as monitors your health
via its peripheral sensor pad (included) and communicates with your computer, mobilephone, personal digital assistant to enhance your daily life.
22
8/6/2019 Reports for Week 3 n 4
23/31
WEEK 4: INFORMATION TECHNOLOGY INDUSTRY
MICROWAVE CAMERA
The camera currently takes 30 images per second by transmitting millimetre and
microwaves to a "collector" on the other side of a subject, and then sends them to a laptop for
real-time inspection. Aside from being able to see straight through your BVDs, it can also be
used to detect defects in spacecraft insulation, find termites lurking in the walls of your
apartment, and help in the diagnosis of skin disease. The camera's creators are working on a
smaller, one-sided version of the device that could have mass-market appeal -- we just hope
this thing stays in R&D long enough for us to get our bikini bodies back. Check out a video
of its G-rated abilities after the break. Dr.Reza Zoughi has basically developed and designed
this camera.
WEEK 6: INFORMATION TECHNOLOGY INDUSTRY
IPAD 2
Apple has just made its second-generation iPad official, It features a 1GHz dual-core
A5 chip and, finally has cameras both on the front and rear. The new CPU is said to be up to
twice as fast, with graphics performance up to nine times better than on the original iPad,
while power requirements have been kept the same. Battery life is, consequently, unaltered,
with Apple promising 10 hours. Pricing, too, has been left unchanged, starting at $499 for a
16GB WiFi only iPad 2 and stretching up to $829 for a WiFi + 3G SKU with 64GB of
storage. The new tablet will come with an HDMI output capable of 1080p, which will set youback $39 for the requisite dongle, called an Apple Digital AV Adapter but there will sadly be
23
8/6/2019 Reports for Week 3 n 4
24/31
no rumblings of Thunderbolt connectivity here. What you will get is an enlarged speaker
grille on the back, as expected, and the same 1024 x 768 resolution and IPS LCD screen
technology as on the original iPad. Basically the advantages of this ipod 2 is, its portable
than a notebook, wonderful productivity apps, and technical added benefits.
WEEK 7: INFORMATION TECHNOLOGY INDUSTRY
IWALLET
Security and safety most important things in our daily life basically it is possible
anything to happen in a minute to our valuables, for those people who with high valuables we
encourage them to use IWALLET, because nobody will be able to open their IWALLET. It is
basically an hard case wallet, tamper resistant, made of plastic composites which you can
only open if it recognizes your fingerprint (it has an incorporated biometric reader). Imagine
it as a portable safe. Examples of the benefits for such a wallet: Teenagers that want to get
hard cash from the fathers wallet while hes sleeping people that have a dedicated personal
locker at the club and do not want the staff with the keys to it to go through their wallet.
These are just a couple of examples out of dozens of others. It is also linked via Bluetooth to
your cellular phone so if both the iwallet and cellular phone are more than 10-15 ft away
from each other, a loud alarm will go off. This is to alert you in case you forget either device
let say at a restaurant or if they pick pocket one of them. This wallet actually protects the
users privacy.
WEEK 8: INFORMATION TECHNOLOGY INDUSTRY
PILEUS THE INTERNET UMBRELLA
Pileus is an umbrella connected to the Internet to make walking in rainy days fun.
Pileus has a large screen on the top surface, a built-in camera, a motion sensor, GPS, and a
digital compass. The current prototype has two main functions: photo-sharing and 3D map
navigation. The photo function is connected to a major web service: Flickr API. A user can
take photo with a camera on the umbrella, and pictures are uploaded to Flickr in two minutes
with context tags via a wireless internet connection. User can also enjoy themselves watching
photo-streams downloaded from Flickr with simple operation of wrist snapping. The
24
8/6/2019 Reports for Week 3 n 4
25/31
advantage of this umbrella is easy to bring, its portable, wont be boring and its very easy to
find our way back home with the help of GPS.
WEEK 9: INFORMATION TECHNOLOGY INDUSTRY
Projection keyboard
A projection keyboard is a virtual keyboard that can be projected and touched on any
surface. The keyboard watches finger movements and translates them into keystrokes in the
device. Most systems can also function as a virtual mouse or even as a virtual piano. A
proposed system called the P-ISM will combine the technology with a small video projector
to create a portable computer the size of a fountain pen. How does a projection keyboard
generally works basically a laser or beamer projects visible virtual keyboard onto level
surface then a sensor or camera in the projector picks up finger movements then detected
coordinates determine actions or characters to be generated
WEEK 10 : INFORMATION TECHNOLOGY INDUSTRY
Face book phone
INQ Cloud Touch Best Facebook Phone. INQ has officially announced the
availability of cloud Facebook Touch phone. The Android mobile widgets on Facebook and
make oriented links that access to social networks, chat, contacts, appointments, alerts, news
and much easier. The phone runs on a Qualcomm chip clocked at 600 MHz and the operating
system Google Android 2.3. What is special supplementary NQI Cloud is that this phone with
Specify offers users unlimited music, though probably need a subscription is included in the
package.
25
8/6/2019 Reports for Week 3 n 4
26/31
WEEK 1: FASHION INDUSTRY
INTRODUCTION TO FASHION INDUSTRY
Fashion, a general term for a currently popular style, especially in clothing, foot wear
or accessories. Fashion references to anything that is the current trend in look and dress up of
a person. The more technical term, costume, has become so linked in the public eye with the
term "fashion" that the more general term "costume" has in popular use mostly been relegated
to special senses like fancy dress or masquerade wear, while the term "fashion" means
clothing generally, and the study of it. For a broad cross-cultural look at clothing and its place
in society, refer to the entries for clothing, costume and fabrics. The remainder of this article
deals with clothing fashions in the Western world. This industry consists of five distinct and
separate levels. These levels are haute couture, luxury wear, affordable luxury wear,
mainstream clothing, and discount clothing.
WEEK 2: FASHION INDUSTRY
Hairdo, Hairstyle, Haircut and Hair colouring gravy
It is a trend for everyone in this century to have different hairstyles so that they may
able to look more attractive. Basically everyone wants to look good and they get bored with
the same hairstyle and wants something new. Hair trend or hair style changes rapidly and
they always catch up and get to know what is the latest hairstyle. You can actually go to any
salon and make your hair straighten or curl your hair. There are many different haircut style
now days which is nice and weird also at times. Hair colouring is the practice of changing the
colour of hair. Common reasons are to cover grey hair, to change to a colour regarded as
more fashionable or desirable, and to restore the original hair colour after it has been
26
8/6/2019 Reports for Week 3 n 4
27/31
discoloured by hairdressing processes or sun bleaching. Now days people are colouring their
hair with so many different colour in the same time.
WEEK 3: FASHION INDUSTRY
Ladies High heels
Whether it's classic and trendy, people now days shopping for erotic and extreme
ladies high heel shoes come in a wide range of styles and heel heights to suit everyone's
tastes. Attractive and sexy, our ladies high heel shoes will accentuate your assets in every
style you choose. Example latest in fashionable footwear, are high heel dress shoes, high heel
sandals, ankle, knee or thigh high boots, stiletto heels fetish shoes and also clear platforms
and high heels. Heel heights range are between two to eight heels. There are many design of
shoes, such as shoes with diamond also.
WEEK 4: FASHION INDUSTRY
Ladies make up style
There are many type of make-up, such as lipsticks, lip gloss ,lip liner ,lip plumper ,lip
balm, lip conditioner , lip primer and lip booster, foundations, rouge , blush or the blusher,
mascara, eye lid glue ,eye liner ,eye shadow ,eye shimmer and glitter eye pencils, and eye
brow pencils. Now days there are many different type of eye shadow style, such as they no
more using one colour, they will use more than one colour with different design. Other than
that they also have fake eye lash with so many different design n long eye lash.
WEEK 5: FASHION INDUSTRY
27
8/6/2019 Reports for Week 3 n 4
28/31
Handbags
There are many types of handbags with different kind of design different shape and
colour. Examples of the branded handbags are Gucci, Levis, Calvin Klein, Guess, Louis
Vuitton and Burberry which is an attractive and comfortable handbag. There is many new
and very different kind or design of handbags. The benefit of this handbag is women are able
to put in many important staff.
WEEK 6: FASHION INDUSTRY
Accessories
Fashion accessories are decorative items that supplement and complement clothes,
such as jewellery, gloves, handbags, hats, belts, scarves, watches, sunglasses, pins, stockings,
bow ties, leg warmers, leggings, neckties, suspenders, and tights. Accessories can add colour,
style and class to an outfit, and create a certain look. Many accessories are produced by
clothing design companies. However, there has been an increase in individuals creating their
own brand name by designing and making their own label of accessories.
WEEK 7: FASHION INDUSTRY
Nail polish
Nail polish is a lacquer applied to toenails and or fingernails for appearance, but also
as nail protection. Polishing without adding chemical layers is called buffing. There are
always many choices of nail polish colour. There are many different type of decoration for
the nail, last time people use to polish their nails using one colour but now people are using
many different colours for their nails and will also design their nails to give a gorgeous look
for the nail. The latest M.A.C products provide customer with many variety of nail polish
colour.
WEEK 8: FASHION INDUSTRY
28
8/6/2019 Reports for Week 3 n 4
29/31
Contact lens
People like to wear the contact lens because there are many variety of colours over 75
million people all over the world use it, the main reason people wear contact lens is because
some people wear due to short, long sightedness or astigamation, other than that people wear
to have the bigger eye image, other than that is to look more unique then the others, and also
to follow according to the current trend ,style or fashion. We also have many wired shape and
colour of contact lens. The ways to choose contact lens are first decide which type of lenses
works best with your lifestyle, and then consider eye health when choosing contact lenses,
think about the size of your eyes when choosing contact lenses, and weigh the price of
contact lenses when deciding which type to purchase.
WEEK 9: FASHION INDUSTRY
In this fashion we have dresses, make up, hair style, shoes, handbags, accessories, nail
polish, contact lens.
WEEK 3: AGRICULTURE INDUSTRY
HARVESTING CROPS
Harvesting is basically known as the process of gathering mature crops from the
fields. Reaping is the cutting of grain or pulse for harvest, typically using a scythe, sickle, or
reaper. The harvest marks the end of the growing season, or the growing cycle for a particular
crop, and this is the focus of seasonal celebrations of many religions but now everyone is
using combine harvesting, its basically a machine that combines the tasks of harvesting,
threshing, and cleaning of grains, The combine allows the crop to be harvested more quickly
and efficiently, it also enables farmers to harvest larger amounts, harvest wheat, corn, oats,
rye, soybeans and barely. The advantages of using combine are, it has high throughput, its
timeliness, less power required, produces clean grains and has multi-crop ability. Combine
29
8/6/2019 Reports for Week 3 n 4
30/31
harvester is the latest technology being used in harvesting crops; it has enables farmers to
harvest larger amounts.
WEEK 5: AVIATION INDUSTRY
Aviation is known as the design, development, production, operation and use of
aircraft. Aviation is included civil aviation, general aviation and also military aviation.
Basically airline owns aircrafts and has partnership with a number of airlines in order to
attain benefits. Airline jobs include the job of flight attendant, air hostess, cabin crew, front
desk jobs, and airline ground crew jobs and so on. General aviation is the job of flying other
than those done by the registered airlines and the military is considered as general aviation.
The latest current issue that we can see in this industry is the Indian aviation industry is one
of the fastest growing aviation industries in the world. Other than that India has 454 airports
and airstrips; of these, 16 are designated international airports. With the liberalization of the
Indian aviation sector, aviation industry in India has undergone a rapid transformation.
WEEK 6: AVIATION INDUSTRY
AIRFORCE F-22 Raptor
This air force Fighter built by Lockheed Martin. Identify and shoot the threat before it
detects. Advance avionics technologies allow the f-22 sensors to gather, integrate and display
essential information in the most useful format to the pilot. The F-22s engines produce more
thrust than any current fighter engine. THE F-22 has extensively designed, tested and refined
aerodynamically during the demonstration/validation phase and the current engineering and
manufacturing development phase. THE f-22 is capable of carrying existing and planned air-
to-air weapons.
30
8/6/2019 Reports for Week 3 n 4
31/31
WEEK 7: AVIATION INDUSTRY
MILITARY AVIATION
The wide variety of military aircraft includes bombers, fighters, and fighter bombers.
Boeing Company announced that it delivered F-15K 47 and F-15K 48 to the Republic of
Korea Air Force. Boeing is among the largest global aircraft manufacturers by revenue,
orders and deliveries, and the third largest aerospace and defence contractor in the world
based on defence-related revenue.