Post on 16-Oct-2014
Case Study CCNA3: SwitchingBasics and Intermediate Routing
Summary of the Company and Network Requirements
The XYZ Research Company is a small company that develops high-speed
wireless products. The main office occupies two buildings in Sydney. One
building is for the Administration Group. The other building is for the Sales
and Marketing Group, and the Research and Development Group. The
Research Group and the Sales and Marketing Group will each have
employees located on all three floors of the main building. The XYZ
Research Company also has a Sales Branch Office located in Melbourne.
The company is implementing a wired network that should support 100%
growth over the next five to ten years. A logical diagram has been provided.
Our task is to design, implement, and fully document the XYZ Research
Company network. In addition to a formal report, we are asked to prepare a
prototype of the network built, before it is fully implemented, in order to
verify that it will meet the company's needs.
XYZ Research Company Requirements
18 employees in the Research and Development Group
9 employees in the Sales and Marketing Group
7 employees in the Administration Group
5 employees in the Remote Sales office
Lifetime maximum of 5 servers on separate subnet, regardless of
company growth.
Use subnet 200.200.100.0/30 for connection to Internet router.
Use public class C network 223.0.0.0 for internal addressing.
Use VLSM for IP addressing.
Expect 100% growth of current IP requirements and when determining
the size of subnets.
All network devices must have IP addresses assigned.
Fase 1: La topologia
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
1 di 33 18/05/2008 22:04
Topologia
Fase 2: Indirizzamento
Riepilogo indirizzamento
Indirizzamento edificio Principale - Sydney
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
2 di 33 18/05/2008 22:04
Indirizzamento edificio Secondario - Sydney
Indirizzamento edificio Melbourne
Indirizzamento edificio Admin - Sydney
Indirizzamento Switch Amministrazione - Sydney
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
3 di 33 18/05/2008 22:04
Indirizzamento Switch1 edificio Principale - Sydney
Indirizzamento Switch2 edificio Principale - Sydney
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
4 di 33 18/05/2008 22:04
Indirizzamento Switch3 edificio Principale - Sydney
Indirizzamento Switch Melbourne
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
5 di 33 18/05/2008 22:04
Indirizzamento degli Host e Server - Sydney
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
6 di 33 18/05/2008 22:04
Indirizzamento degli Host - Sydney
Fase 3: Routing
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
7 di 33 18/05/2008 22:04
Protocolli di routing a confronto
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
8 di 33 18/05/2008 22:04
Dettagli routing OSPF
Fase 4: Gestione degli Switch
Dettaglio degli Switch
Fase 5: Previsione dei costi
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
9 di 33 18/05/2008 22:04
Materiale per 1° Piano edificio Principale - Sydney
Materiale per 2° Piano edificio Principale - Sydney
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
10 di 33 18/05/2008 22:04
Materiale per 3° Piano edificio Principale - Sydney
Materiale per reparto Sales - Sydney
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
11 di 33 18/05/2008 22:04
Materiale per reparto Amministrazione - Sydney
Fase 6: Configurazione Router Sydney_Border
enable
conf t
hostname Sydney_Border
banner motd # Sydney_Border - Accesso limitato #
line console 0
password cisco
login
exit
line vty 0 4
password cisco
login
exit
enable secret class
ip subnet-zero
int s0
ip address 223.0.0.1 255.255.255.252
description Interfaccia Serial0/0 DCE - Connessione verso Sydney_Main
clock rate 2000000
no shutdown
exit
int s1
ip address 200.200.200.2 255.255.255.252
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
12 di 33 18/05/2008 22:04
description Interfaccia Serial0/1 DTE - Connessione verso ISP
no shutdown
exit
int fa0
ip address 223.0.0.9 255.255.255.252
description Interfaccia FastEthernet0/0 - Connessione verso Sydney_Admin
no shutdown
exit
int lo0
ip address 127.0.0.254 255.255.255.255
description Interfaccia Loopback0/0 - Interfaccia statica per id OSPF
no shutdown
exit
ip route 0.0.0.0 0.0.0.0 200.200.200.1
router ospf 50
network 127.0.0.0 0.0.0.255 area 0
network 223.0.0.0 0.0.0.3 area 0
network 223.0.0.8 0.0.0.3 area 0
default-information originate
exit
ip host Sydney_Border 223.0.0.1
ip host Sydney_Admin 223.0.0.10
ip host Sydney_Main 223.0.0.5
ip host Melbourne_Sales 223.0.0.6
ip host Sw_Admin 223.0.0.18
ip host Sw_Main1 223.0.0.22
ip host Sw_Main2 223.0.0.23
ip host Sw_Main3 223.0.0.24
ip host Sw_Sales 223.0.0.14
ip host www 223.0.0.33
Fase 7: Configurazione Router Sydney_Admin
enable
conf t
hostname Sydney_Admin
banner motd # Sydney_Admin - Accesso limitato #
line console 0
password cisco
login
exit
line vty 0 4
password cisco
login
exit
enable secret class
ip subnet-zero
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
13 di 33 18/05/2008 22:04
int fa0
ip address 223.0.0.10 255.255.255.252
description Interfaccia FastEthernet0/0 - Connessione verso Sydney_Border
no shutdown
exit
int fa0/1.1
encapsulation dot1q 1
ip address 223.0.0.17 255.255.255.252
description Interfaccia FastEthernet0/1.1 - Gateway per VLAN1 Admin
no shutdown
exit
int fa0/1.2
encapsulation dot1q 2
ip address 223.0.0.77 255.255.255.240
description Interfaccia FastEthernet0/1.2 - Gateway per Admin
no shutdown
exit
int lo0
ip address 127.0.0.253 255.255.255.255
description Interfaccia Loopback0/0 - Interfaccia statica per id OSPF
no shutdown
exit
router ospf 50
network 127.0.0.0 0.0.0.255 area 0
network 223.0.0.16 0.0.0.3 area 0
network 223.0.0.8 0.0.0.3 area 0
network 223.0.0.76 0.0.0.15 area 0
exit
ip host Sydney_Border 223.0.0.1
ip host Sydney_Admin 223.0.0.10
ip host Sydney_Main 223.0.0.5
ip host Melbourne_Sales 223.0.0.6
ip host Sw_Admin 223.0.0.18
ip host Sw_Main1 223.0.0.22
ip host Sw_Main2 223.0.0.23
ip host Sw_Main3 223.0.0.24
ip host Sw_Sales 223.0.0.14
ip host www 223.0.0.33
Fase 8: Configurazione Router Sydney_Main
enable
conf t
hostname Sydney_Main
banner motd # Sydney_Main - Accesso limitato #
line console 0
password cisco
login
exit
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
14 di 33 18/05/2008 22:04
line vty 0 4
password cisco
login
exit
enable secret class
ip subnet-zero
int s0
ip address 223.0.0.5 255.255.255.252
description Interfaccia Serial0/0 DCE - Connessione verso Melboure_Sales
clock rate 2000000
no shutdown
exit
int s1
ip address 223.0.0.2 255.255.255.252
description Interfaccia Serial0/1 DTE - Connessione verso Sydney_Border
no shutdown
exit
int fa0/0.1
encapsulation dot1q 1
ip address 223.0.0.21 255.255.255.248
description Interfaccia FastEthernet0/0.1 - Gateway per VLAN1 Main
no shutdown
exit
int fa0/0.2
encapsulation dot1q 2
ip address 223.0.0.125 255.255.255.192
description Interfaccia FastEthernet0/0.2 - Gateway per R&D
no shutdown
exit
int fa0/0.3
encapsulation dot1q 3
ip address 223.0.0.93 255.255.255.224
description Interfaccia FastEthernet0/0.3 - Gateway per S&M
no shutdown
exit
int fa0/0.4
encapsulation dot1q 4
ip address 223.0.0.29 255.255.255.224
description Interfaccia FastEthernet0/0.4 - Gateway per Server
no shutdown
exit
int lo0
ip address 127.0.0.252 255.255.255.255
description Interfaccia Loopback0/0 - Interfaccia statica per id OSPF
no shutdown
exit
router ospf 50
network 127.0.0.0 0.0.0.255 area 0
network 223.0.0.4 0.0.0.3 area 0
network 223.0.0.0 0.0.0.3 area 0
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
15 di 33 18/05/2008 22:04
network 223.0.0.20 0.0.0.7 area 0
network 223.0.0.124 0.0.0.63 area 0
network 223.0.0.92 0.0.0.31 area 0
network 223.0.0.26 0.0.0.31 area 0
exit
ip host Sydney_Border 223.0.0.1
ip host Sydney_Admin 223.0.0.10
ip host Sydney_Main 223.0.0.5
ip host Melbourne_Sales 223.0.0.6
ip host Sw_Admin 223.0.0.18
ip host Sw_Main1 223.0.0.22
ip host Sw_Main2 223.0.0.23
ip host Sw_Main3 223.0.0.24
ip host Sw_Sales 223.0.0.14
ip host www 223.0.0.33
Fase 9: Configurazione Router Melbourne_Sales
enable
conf t
hostname Melbourne_Sales
banner motd # Melbourne_Sales - Accesso limitato #
line console 0
password cisco
login
exit
line vty 0 4
password cisco
login
exit
enable secret class
ip subnet-zero
int s0
ip address 223.0.0.6 255.255.255.252
description Interfaccia Serial0/0 DTE - Connessione verso Sydney_Main
no shutdown
exit
int fa0/0.1
encapsulation dot1q 1
ip address 223.0.0.13 255.255.255.252
description Interfaccia FastEthernet0/0.1 - Gateway per VLAN1 Sales
no shutdown
exit
int fa0/0.2
encapsulation dot1q 2
ip address 223.0.0.61 255.255.255.240
description Interfaccia FastEthernet0/1.2 - Gateway per Sales
no shutdown
exit
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
16 di 33 18/05/2008 22:04
int lo0
ip address 127.0.0.251 255.255.255.255
description Interfaccia Loopback0/0 - Interfaccia statica per id OSPF
no shutdown
exit
router ospf 50
network 127.0.0.0 0.0.0.255 area 0
network 223.0.0.4 0.0.0.3 area 0
network 223.0.0.12 0.0.0.3 area 0
network 223.0.0.60 0.0.0.15 area 0
exit
ip host Sydney_Border 223.0.0.1
ip host Sydney_Admin 223.0.0.10
ip host Sydney_Main 223.0.0.5
ip host Melbourne_Sales 223.0.0.6
ip host Sw_Admin 223.0.0.18
ip host Sw_Main1 223.0.0.22
ip host Sw_Main2 223.0.0.23
ip host Sw_Main3 223.0.0.24
ip host Sw_Sales 223.0.0.14
ip host www 223.0.0.33
Fase 10: Configurazione Switch Sw_Admin
enable
conf t
hostname Sw_Admin
line console 0
password cisco
login
exit
line vty 0 23
password cisco
login
exit
ip subnet-zero
int fa0/1
speed 100
duplex full
switchport mode trunk
no shutdown
exit
int fa0/2
speed 100
duplex full
switchport mode access
switchport access vlan 2
exit
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
17 di 33 18/05/2008 22:04
int fa0/3
speed 100
duplex full
switchport mode access
exit
int fa0/4
speed 100
duplex full
switchport mode access
exit
int fa0/5
speed 100
duplex full
switchport mode access
exit
int fa0/6
speed 100
duplex full
switchport mode access
exit
int fa0/7
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdow
exit
int fa0/8
speed 10
duplex full
swit chport mode access
switchport access vlan 2
no shutdown
exit
int fa0/9
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/10
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/11
speed 10
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
18 di 33 18/05/2008 22:04
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/12
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/13
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/14
speed 10
duplex full
switchport mode access
switchport access vlan 2
exit
int fa0/15
speed 10
duplex full
switchport mode access
switchport access vlan 2
exit
int fa0/16
speed 10
duplex full
switchport mode access
switchport access vlan 2
exit
int fa0/17
speed 10
duplex full
switchport mode access
switchport access vlan 2
exit
int fa0/18
speed 10
duplex full
switchport mode access
switchport access vlan 2
exit
int fa0/19
speed 10
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
19 di 33 18/05/2008 22:04
duplex full
switchport mode access
switchport access vlan 2
exit
int fa0/20
speed 10
duplex full
switchport mode access
switchport access vlan 2
exit
int fa0/21
speed 10
duplex full
switchport mode access
exit
int fa0/22
speed 10
duplex full
switchport mode access
exit
int fa0/23
speed 10
duplex full
switchport mode access
exit
int fa0/24
speed 10
duplex full
switchport mode access
exit
interface Vlan1
ip address 223.0.0.18 255.255.255.252
exit
ip default-gateway 223.0.0.17
exit
vlan database
vtp v2-mode
vtp domain Admin
vtp transparent
exit
ip host Sydney_Border 223.0.0.1
ip host Sydney_Admin 223.0.0.10
ip host Sydney_Main 223.0.0.5
ip host Melbourne_Sales 223.0.0.6
ip host Sw_Admin 223.0.0.18
ip host Sw_Main1 223.0.0.22
ip host Sw_Main2 223.0.0.23
ip host Sw_Main3 223.0.0.24
ip host Sw_Sales 223.0.0.14
ip host www 223.0.0.33
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
20 di 33 18/05/2008 22:04
Fase 11: Configurazione Switch Sw_Main1
enable
conf t
hostname Sw_Main1
line console 0
password cisco
login
exit
line vty 0 23
password cisco
login
exit
ip subnet-zero
int fa0/1
speed 100
duplex full
switchport mode trunk
no shutdown
exit
int fa0/2
speed 100
duplex full
switchport mode trunk
no shutdown
exit
int fa0/3
speed 100
duplex full
switchport mode trunk
no shutdown
exit
int fa0/4
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/5
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/6
speed 10
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
21 di 33 18/05/2008 22:04
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/7
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/8
speed 10
duplex full
switchport mode access
switchport access vlan 3
no shutdown
exit
int fa0/9
speed 10
duplex full
switchport mode access
switchport access vlan 3
no shutdown
exit
int fa0/10
speed 10
duplex full
switchport mode access
switchport access vlan 3
no shutdown
exit
int fa0/11
speed 100
duplex full
switchport mode access
switchport access vlan 4
no shutdown
exit
int fa0/12
speed 100
duplex full
switchport mode access
switchport access vlan 4
no shutdown
exit
int fa0/13
speed 100
duplex full
switchport mode access
switchport access vlan 4
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
22 di 33 18/05/2008 22:04
no shutdown
exit
int fa0/14
speed 100
duplex full
switchport mode access
switchport access vlan 4
no shutdown
exit
int fa0/15
speed 100
duplex full
switchport mode access
switchport access vlan 4
no shutdown
exit
int fa0/16
speed 100
duplex full
switchport mode access
exit
int fa0/17
speed 100
duplex full
switchport mode access
exit
int fa0/18
speed 100
duplex full
switchport mode access
exit
int fa0/19
speed 100
duplex full
switchport mode access
exit
int fa0/20
speed 100
duplex full
switchport mode access
exit
int fa0/21
speed 100
duplex full
switchport mode access
exit
int fa0/22
speed 100
duplex full
switchport mode access
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
23 di 33 18/05/2008 22:04
exit
int fa0/23
speed 100
duplex full
switchport mode access
exit
int fa0/24
speed 100
duplex full
switchport mode access
exit
interface Vlan1
ip address 223.0.0.22 255.255.255.248
exit
ip default-gateway 223.0.0.21
exit
vlan database
vtp v2-mode
vtp domain Main
vtp server
exit
ip host Sydney_Border 223.0.0.1
ip host Sydney_Admin 223.0.0.10
ip host Sydney_Main 223.0.0.5
ip host Melbourne_Sales 223.0.0.6
ip host Sw_Admin 223.0.0.18
ip host Sw_Main1 223.0.0.22
ip host Sw_Main2 223.0.0.23
ip host Sw_Main3 223.0.0.24
ip host Sw_Sales 223.0.0.14
ip host www 223.0.0.33
Fase 12: Configurazione Switch Sw_Main2
enable
conf t
hostname Sw_Main2
line console 0
password cisco
login
exit
line vty 0 23
password cisco
login
exit
ip subnet-zero
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
24 di 33 18/05/2008 22:04
int fa0/1
speed 100
duplex full
switchport mode trunk
no shutdown
exit
int fa0/2
speed 100
duplex full
switchport mode trunk
no shutdown
exit
int fa0/3
speed 100
duplex full
exit
int fa0/4
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/5
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/6
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/7
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/8
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
25 di 33 18/05/2008 22:04
int fa0/9
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/10
speed 10
duplex full
switchport mode access
switchport access vlan 3
no shutdown
exit
int fa0/11
speed 10
duplex full
switchport mode access
switchport access vlan 3
no shutdown
exit
int fa0/12
speed 10
duplex full
switchport mode access
switchport access vlan 3
no shutdown
exit
int fa0/13
speed 10
duplex full
switchport mode access
switchport access vlan 3
no shutdown
exit
int fa0/14
speed 100
duplex full
switchport mode access
exit
int fa0/15
speed 100
duplex full
switchport mode access
exit
int fa0/16
speed 100
duplex full
switchport mode access
exit
int fa0/17
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
26 di 33 18/05/2008 22:04
speed 100
duplex full
switchport mode access
exit
int fa0/18
speed 100
duplex full
switchport mode access
exit
int fa0/19
speed 100
duplex full
switchport mode access
exit
int fa0/20
speed 100
duplex full
switchport mode access
exit
int fa0/21
speed 100
duplex full
switchport mode access
exit
int fa0/22
speed 100
duplex full
switchport mode access
exit
int fa0/23
speed 100
duplex full
switchport mode access
exit
int fa0/24
speed 100
duplex full
switchport mode access
exit
interface Vlan1
ip address 223.0.0.23 255.255.255.248
exit
ip default-gateway 223.0.0.21
exit
vlan database
vtp v2-mode
vtp domain Main
vtp client
exit
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
27 di 33 18/05/2008 22:04
ip host Sydney_Border 223.0.0.1
ip host Sydney_Admin 223.0.0.10
ip host Sydney_Main 223.0.0.5
ip host Melbourne_Sales 223.0.0.6
ip host Sw_Admin 223.0.0.18
ip host Sw_Main1 223.0.0.22
ip host Sw_Main2 223.0.0.23
ip host Sw_Main3 223.0.0.24
ip host Sw_Sales 223.0.0.14
ip host www 223.0.0.33
Fase 13: Configurazione Switch Sw_Main3
enable
conf t
hostname Sw_Main3
line console 0
password cisco
login
exit
line vty 0 23
password cisco
login
exit
ip subnet-zero
int fa0/1
speed 100
duplex full
switchport mode trunk
no shutdown
exit
int fa0/2
speed 100
duplex full
switchport mode trunk
no shutdown
exit
int fa0/3
speed 100
duplex full
switchport mode access
exit
int fa0/4
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
28 di 33 18/05/2008 22:04
exit
int fa0/5
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/6
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/7
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/8
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/9
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/10
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/11
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/12
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
29 di 33 18/05/2008 22:04
speed 10
duplex full
switchport mode access
switchport access vlan 3
no shutdown
exit
int fa0/13
speed 10
duplex full
switchport mode access
switchport access vlan 3
no shutdown
exit
int fa0/14
speed 100
duplex full
switchport mode access
exit
int fa0/15
speed 100
duplex full
switchport mode access
exit
int fa0/16
speed 100
duplex full
switchport mode access
exit
int fa0/17
speed 100
duplex full
switchport mode access
exit
int fa0/18
speed 100
duplex full
switchport mode access
exit
int fa0/19
speed 100
duplex full
switchport mode access
exit
int fa0/20
speed 100
duplex full
switchport mode access
exit
int fa0/21
speed 100
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
30 di 33 18/05/2008 22:04
duplex full
switchport mode access
exit
int fa0/22
speed 100
duplex full
switchport mode access
exit
int fa0/23
speed 100
duplex full
switchport mode access
exit
int fa0/24
speed 100
duplex full
switchport mode access
exit
interface Vlan1
ip address 223.0.0.24 255.255.255.248
exit
ip default-gateway 223.0.0.21
exit
vlan database
vtp v2-mode
vtp domain Main
vtp client
exit
ip host Sydney_Border 223.0.0.1
ip host Sydney_Admin 223.0.0.10
ip host Sydney_Main 223.0.0.5
ip host Melbourne_Sales 223.0.0.6
ip host Sw_Admin 223.0.0.18
ip host Sw_Main1 223.0.0.22
ip host Sw_Main2 223.0.0.23
ip host Sw_Main3 223.0.0.24
ip host Sw_Sales 223.0.0.14
ip host www 223.0.0.33
Fase 14: Configurazione Switch Sw_Sales
enable
conf t
hostname Sw_Sales
line console 0
password cisco
login
exit
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
31 di 33 18/05/2008 22:04
line vty 0 11
password cisco
login
exit
ip subnet-zero
int fa0/1
speed 100
duplex full
switchport mode trunk
no shutdown
exit
int fa0/2
speed 100
duplex full
switchport mode access
exit
int fa0/3
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/4
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/5
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/6
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
exit
int fa0/7
speed 10
duplex full
switchport mode access
switchport access vlan 2
no shutdown
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
32 di 33 18/05/2008 22:04
exit
int fa0/8
speed 100
duplex full
switchport mode access
no shutdown
exit
int fa0/9
speed 100
switchport mode access
duplex full
exit
int fa0/10
speed 100
duplex full
switchport mode access
no shutdown
exit
int fa0/11
speed 100
duplex full
switchport mode access
no shutdown
exit
int fa0/12
speed 100
duplex full
switchport mode access
exit
interface Vlan1
ip address 223.0.0.14 255.255.255.252
exit
ip default-gateway 223.0.0.13
exit
vlan database
vtp v2-mode
vtp domain Sales
vtp transparent
exit
ip host Sydney_Border 223.0.0.1
ip host Sydney_Admin 223.0.0.10
ip host Sydney_Main 223.0.0.5
ip host Melbourne_Sales 223.0.0.6
ip host Sw_Admin 223.0.0.18
ip host Sw_Main1 223.0.0.22
ip host Sw_Main2 223.0.0.23
ip host Sw_Main3 223.0.0.24
ip host Sw_Sales 223.0.0.14
ip host www 223.0.0.33
Case Study CCNA3: Switching Basics and Intermed... http://www.alessandro-pensato.it/html/case_study...
33 di 33 18/05/2008 22:04