Post on 06-Feb-2021
Quicke Dimension – Premium Loaders Original Implements
Quicke Dimension Series
alo.uk.com
Retail Price List V2.0
March2016
User GuideSpecification Quicke Dimension series Recommendations PageTechnical Data Counterweight and Bucket Recommendations C1Loader Prices, Subframe Codes, Types and Widths Implement – Loader Recommendations C2LCS ErgoDrive, EasyDrive, ElectroDrive and Options Implements PageLCS Live3 (similtaneous tip/crowd 3rd service) and Options Buckets – H, HT, HD, HV, HDV C3AAC Sensor and Hose Burst Kit Special Buckets – Hydraulic Conversion Kits Multipurpose (4 in 1), Hy-Tipping, Grading and Precision QD Loader Options Bucket Grabs – QD Loader Tool Carrier and Adapter Options Multibenne, Powergrab SE, Powergrab BOHQD Bearing Box and Older Loader Options Forks and Grabs –
Tractor Make Manure fork, Silograb, Silocut SGII and Maxi GrappleCase IH 12 13 Bale Handling – Round bale handling & Square bale handler C7Claas Square bale forks (fixed and hinged), Deutz 15 16 Lifting – Pallet Forks,Fendt Lifting – Big Bag Lifter, Single, Dual and Triple Bag
Fiat and Ford (US subframes only) Other Implements – JCB Fastrac 3 Point Linkage Hitch, Stone Fork, Silo SplitJohn Deere 20 21 Skidsteer Implements –
Kubota Buckets, Bales Spikes, Pallet Forks and Weld On HooksImplement Selection Advert Hook Types - Loader
Landini 24 25 Euro, Alo Type 3, Trima and MX Hooks (including dimensions)Massey Ferguson 26 27 Hook Types - Telehandler
McCormick 28 29New Holland 30 31
Same 32 33Valtra 34 35 Other Info Page Zetor Helpful Information
Q88 and Q98 loaders - High horsepower tractors Weights of Material Chart, Conversion ChartsBelarus, Hurlimann, Kioti, Lamborghini, Older Renault, Steyr & Ursus Contact Info, Carriage Charges and important info Inside back
Claas Scorpion, JCB Q-Fit, Manitou, Matbro Pin and Cone, Merlo, Volvo Large BM
C11
C12
8
19
C4
C11
C5
C6
C10
C8
C9
CONTENTS
1234
Page
Contact Alo UK
37
5
Page
6
18
10
2322
17
11
9
7
14
36
2
Ordering Information1 Take down the Model and type of implement you require
Model example - Silograb 170 (170 = 1.70m wide)Not a recommended match 2 Make and Model of front loader or handler for some AgLine implementsThe loader will NOT fit the tractor. 3 Type of hook system required
8,150 US/UM subframes available only 4 Note the discount code A or B and retail priceUS/UM subframes only 5 Email your order to your area manager or to sales@alo.uk.com.
The price specified at the intersection comprises of the following components:
1 Only use the recommendations in this price list.
1
Should you wish to discuss your choice in more detail, please contact your local Alo UK Area Manager (phone numbers are in the inside back cover) or contact the Alo UK Sales Office direct on 01299 250922, Fax 01299 250944, E-mail: mail@alo.uk.com
Alo UK price list covers all UK markets excluding Northern Ireland. All prices are in Pounds Sterling.All prices are excluding VAT. We hold a policy of continuous improvement. We reserve the right to change product specification and prices at any time without prior notice.
Some loaders may require extended bearing boxes and are FOC when ordered with loader.Extra cost when ordered afterwards – see notes .
4 Rear counterweight must be used with front loaders in accordance with regulation EN 12525 (See page C 1)
Use the recommendatiins as a guide to chose to correct implement for you tractor
Ensure the implement is right for your machine
Ensure you check that your implement selection is recommended for your loader or the work to carry out.
Choose the implement you require
Loaders
Alo UK will not accept any responsibility if damage or failure occurs as a consequence or an incorrect implement to tractor/telehandler combination. I.E. Implement too large for loader/handler, .loader/handler is too large for implement
2
The Machinery Directive 2006/42/EC applies to all material handling machinery and should be interpreted in conjunction with all ROPS (Roll Over Protection Structure) and *FOPS (Falling Object Protection Structure) to ensure operator protection. Please familiarise yourself with Machinery Directive 2006/42/EC.*Do not mount a non-parallel loader to a tractor without FOPS*
3Hydraulic Valves
A guide to using this dealer price list Please read this information carefullyThis price list has been designed to ensure choosing a Quicke® loader and Original Implement™ and correctly matching them to the tractor in a simple operation.
Use the following guidelines to assist you…
AgLine
2nd year warranty on Silocut SG covers structure only and does not include any wearing part(s) or hydraulic components.
Short subframes (price code DS or DM) usually mount from the front bolster of the tractor to the front of the transmission. Long subframes (price code DSX or DMX) run the entire length of the tractor, to the rear axle. Tractor front grille-guards (if applicable) are included in the price. Some ‘DMX’ subframes are priced as ‘DM’. Occasionally additional items (e.g. Exhaust elbows, Power beyond plates etc) may also be required but not necessarily specified; therefore it is important to check with our sales office before calculating the final price. On some occasions, it may be necessary to obtain optional parts from the tractor manufacturer.When a shaded intersection is shown, a US or UM subframe is used
ErgoDrive LCS mono-lever control valve comes in either Open Centre (OC) or Load Sensing (LS) configuration.EasyDrive LCS Code “EY” (EasyDrive) is also available or upgrade to ElectroDrive LCS Pro.Hose kit options may also be available for you tractor.Note – a conversion kit may be required depending on loader/hydraulic combinationFinally, choose from our large selection of implements at the rear of the price list.
Choose a loader compatible to your requirements from the specification sheet on page 2 and 3 of the price list.
Select the appropriate price sheet for the tractor to which the loader is to be fitted.
1
Select the tractor model from the left-hand column and the loader model along the top row of the sheet. If there is a price specified at the intersection of the column and row, this is a recommended match for the tractor and loader.Four other possibilities should be noted here…
Parallel Loader.
Subframe. (Also refer to page 4)
Price includes Euro implement carrier, mechanical latching (c/w Clic-On) and factory fit 3rd service and Electric SoftDrive .
Price includes Euro tool carrier, mechanical latching (c/w Clic-On), factory fit 3rd service.
Non parallel Loader.
d. Loader format not available
c. Shaded Intersection
b. Black Intersection
a. No price specified
2
Loader Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78 Q88 Q98Standard equipment →
Max recommended tractor weight Kg 4000 4000 4500 5200 6000 4000 4000 4000 4500 4500 4500 5200 5200 6000 6000 7000 7000 9000 13000
Tractor size 50-80 50-80 60-100 80- 120 100-150 50-80 50-80 50-80 60-100 60-100 60-100 80-120 80-120 100-150 100-150 120-190 120-190 >150 >200
Lift height to pivot pin A m 3.50 3.50 3.75 4.00 4.25 3.50 3.50 3.65 3.75 3.75 3.90 4.00 4.00 4.25 4.25 4.50 4.50 4.95 4.95
Lift height under level bucket B m 3.20 3.20 3.45 3.70 3.95 3.20 3.20 3.35 3.45 3.45 3.60 3.70 3.70 3.95 3.95 4.20 4.20 4.65 4.65
Lift capacity max lift height 80 cm from pivot pin X Kg 1220 1450 1500 1640 1970 1310 1590 1310 1630 1920 1600 1720 2010 2120 2450 2120 2430 2770 2600
Lift capacity 1.5 m lift height 80 cm from pivot pin Kg 1250 1500 1560 1680 1980 1440 1740 1360 1800 2110 1720 1930 2250 2250 2590 2370 2700 3050 3210
Lift capacity ground level 80 cm from pivot pin Kg 1390 1660 1730 1860 2130 1530 1840 1380 1910 2250 1800 2070 2410 2330 2680 2540 2900 3340 3610
Lift capacity max lift height at pivot pin Kg 1760 2060 2150 2310 2710 1520 1800 1520 1900 2210 1890 2060 2370 2440 2780 2490 2820 3070 2880
Lift capacity 1.5 m lift height at pivot pin Kg 1980 2310 2430 2560 2910 1640 1950 1560 2060 2390 1980 2200 2530 2520 2870 2650 3000 3400 3590
Lift capacity ground level at pivot pin Kg 2310 2690 2810 2920 3220 1920 2270 1750 2400 2770 2220 2520 2890 2790 3170 2990 3380 3930 4210
Max tear-out force 800 mm out from pivot pin 2410 2410 2800 2840 3360 2380 2380 2330 2770 2770 2830 2810 3850 3360 4470 3870 4480 4460 4450
Rollback angle (degrees) C Min 44 44 43 46 45 44 44 44 43 43 44 45 45 45 45 44 44 44 42
Dump angle (degrees) D Min 58 58 59.7 55.5 52 58 58 58 59.7 59.7 54.5 55.5 55.5 52 52 52 52 48.5 50
Implemet cylinder dimensions 75/40 75/40 80/40 80/40 85/40 7540/4075
40/4075
40/4080
40/4080
40/4080
40/4080
40/4090
40/4085
40/4095
40/4090
40/40100
50/50100
50/50100
50/50
Lift cylinder dimensions 70/40 75/40 80/40 85/50 90/50 65/40 70/40 65/40 75/40 80/40 75/40 80/40 85/50 85/50 90/50 90/50 95/50 95/50 100/50
Lifting time to max lift height at 60 l/min Sec 3.8 4.4 5.0 5.7 6.9 3.3 3.8 3.4 4.4 5.0 4.4 5.1 5.7 6.2 6.9 6.9 7.7 9.5 9.9
Parallel device
3rd service
Softdrive
Loader to subframe securing system
Loader weight Kg 450 450 515 554 628 521 521 544 585 585 595 621 621 721 721 760 760 838 935
Euro Combi tool carriers available for Euro No 8/Alo 3 hooks, Euro No 8/Trima SMS hooks and Euro No8/MX, Euro/Faucheux - additional £200. Lift heights for loaders mounted on to US and UM subframes are approximate. Heights will differ!
Lock & Go Lock & Go
No Yes
Yes Yes
No Yes
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go
NON PARALLEL PARALLEL (Self Levelling)
Euro T/C c/w clic on, 3rd service and Lock & Go
3
Max system pressure: 250 barMax tank pressure: 20 barPilot oil pressure: 23 barMax recommended flow, fixed pump: 120 L/minMax recommended flow, variable pump: 150 L/minRegulated flow to loader: Max 90 L/min
Some Quicke Dimensions features at a glance
Technical dataReference values for specification charts.
Use the above diagram as a reference chart for the specification page.Depending on make and model of tractor, lift heights for loaders may differ to specification!
Hydraulic Data.
NEW LCS TECHNICAL DATA
OPEN CENTRE HYDRAULIC SYSTEMSNormally, manufacturers specified values are obtained at a hydraulic oil pressure of 185 bars with a flow rate of 60
litres per minute.
Please note that on tractors with open centre hydraulic systems, 60 litres per minute is normally quoted at rated
engine RPM (i.e 2150 rpm).
Non-Parallel loaders Excellent visibility Strong construction Clic-On quick attach
A
B
80cm
C
D
X
Great hitching visibilityParallel loaders
PT
LS
T
P
Serial
Load Sensing Open Centre
4
DS DM DL DXL US UM Codes PricesQ31 £3,870 • • •Q33 £4,170 • n/a DSQ41 £4,370 • • DSXQ51 £5,070 • • DMQ61 £5,870 • n/a DMX £1,795
DL £2,295Q36 £5,120 • • • DXL £2,495Q38 £5,420 • n/a SP1 £4,795Q39 £5,520 • SP2 £6,000Q46 £5,620 • •Q48 £5,920 • n/a S SX M MX £1,795Q49 £6,120 • n/aQ56 £6,320 • • •Q58 £6,620 • n/a OC & LS £1,075Q66 £7,120 • •Q68 £7,420 • n/a SHK £575Q76 £7,720 • • HK (deluxe) £1,275Q78 £8,020 • HK3 (live 3) £775Q88 £9,920 •Q98 £10,920 n/a • EY £1,575
Note - Q21 and Q26 are no longer available. E £1,875Utilise Versa-X series.
Subframe widthsLoaderModel
LoaderPrice
Subframe Compatibility
n/a
n/a
Electric Controlled
Delta System
US UM System
n/a
n/a
n/a
n/an/a n/a
Certain models from the Quicke Dimension range are available with US and UM bearing boxes, so that they can
mount to their respective subframes.US loader width – 900mm
UM loader width – 1040mm1. Previous model Quicke loader mounted to US or UM
subframes where the customer wants to update the loader but not the tractor.
2. If a Delta subframe is not available for an older tractor model.
n/a
Loader Prices, Subframe Codes and PricesSubframe Codes
Hydraulic Codes
£1,595
Hose Set
Cable Controlledn/a
n/a
Para
llel L
oade
rsN
on P
aral
lel
1200mm standard width
"DL" Extra wide For large high horsepower
tractors
DXL Super wide1420mm
1040mm
"DM" Delta wide"UM" System
"US" System
900mm
A. Subframe saddle close to loader beam pivot point.B. 30 mm upright.
C. 200 or 250 mm deep upright.D. Lock & Go connection.
BenefitsVertical point coupling.
Larger dimensioned subframe.Maximum space for tractor servicing.
Long subframeDelta DMX type
D
A
C
B
Short subframeDelta DM type
5
OCLS
Part No TJ107 Part No 5034083
To upgrade loader package when ErgoDrive listed add £500
or when HK listed add £300
To upgrade loader package when ErgoDrive listed add £800
or when HK listed add £600
Price
Couplers
Do
you
need
a C
onve
rsio
n K
it fo
r you
r loa
der o
r tra
ctor
?
LCS MultiCoupler MC4Single multicoupler for
LCS control valve. Mounts directly to control valve, incorporates electrical
connector
Part number5220530
CANbus Electro-Hydraulic Valve Retro fit Options
Price £120 Price £150
ErgoDrive LCS Kits
£1,075
Electric Joystick and Control Valve
Monolever and Control Valve
Monolever c/w 3rd service and electric Softdrive switch
MC4 replaces individual flat face couplers
LCS EasyDriveCANbus Electro-Hydraulic Valves
LCS ElectroDrive Professional Standard Hose Sets
Price £295
Standard kit connects to aux' valve including
mid-mount valves.May require additional
components from tractor manufacturer.
Price £1,575 Price
You can adapt EasyDrive to operate a front linkage.
EasyDrive LCS has similar functions as
ErgoDrive plus Bucket Shake.Kits include joystick mounting brackets.
£1,875Price £575
Loader hoses connect via individual flat face couplers
Tortoise mode, Bucket shake, Visual AAC, On/Off 3rd service, Locked 3rd service
function, Continuous 3rd service function, Fast function, 3rd service speed configuration, Programmable quick
select button plus more configuration settings..
For the professional user If available for your tractor
Deluxe Hose SetsRelay Kit for high current solenoids Low Hydraulic Flow Accumulator If available for your tractor
Relay Kit to operate higher current 3rd/4th service
diverter valves in conjunction with LCS EasyDrive or
ElectroDrive
For EasyDrive and ElectroDrive Operates via the tractors
own armrest joystick.May require additional
components from tractor manufacturer.Consists of -
Diverter valve, hoses, switches, harness
This accumulator kit must be ordered for tractors that have
low hydraulic flow1. Transferring pre-2005 loaders on to new tractor.
2. Operating additional diverter on 3 point linkage
Price £1,275
Valve type above, may not be as shown for your tractor
Individual couplers are supplied standard with new loaders
6
Or
Or
What is Live 3
SPECIAL ORDER ONLYElectroDrive Pro, Live3
c/w Hose kit* with individual couplers
Live3 enables the operator to use the loader's implement cylinders and the 3rd service
simultaneously, so you can open and close the implement while tipping and crowding. This
decreases working time when operating with hydraulic implements. Some 3rd service fuctions
not available with Live3
Price
Part number5034283
Price Contact Alo UK
Live 3 - simultaneous tip/crowd 3rd service operation
Live3 is only available in conjuction with latest LCS ElectroDrive Professional
system.Contact Alo UK for more
info
LCS ElectroDrive c/w Live 3
Live 3 Pricing
£2,755
Live3 valve c/w Hose kit* with individual couplers
Live3 valve c/w Hose kit* with Multicoupler MC2**
Retro Fit Live3
*Order hose set
1. Hose kit as a retro fit kit. Hose kit is ordered as per
loader model.
2. Order loader with hose set pre-installed in loader
beam
Price Contact Alo UK
Retro fit Live3 is only compatable with and
existing LCS ElectroDrive Professional which has
Live3 electrical connection on the master unit.
Contact Alo UK
LCS MultiCoupler MC2**
Part number5220541
Not required if ordered with hose kit (as above**) Price £215
Loader comes c/w all Live 3 hoses factory * installed (when ordered as a package).ElectroDrive Professional Live 3
valve set mounts to the tractor in the same way as the standard LCS ElectroDrive valve
Single multicoupler for Live3 valve. Mounts
directly to Live3 valve, incorporates electrical
connector
£2,905
What you getLCS ElectroDrive Professional c/w Live 3 valvetogether with specific hose kit for your loader
model.The standard 3rd service is not required with Live 3
ElectroDrive Pro, Live3 c/w Hose kit* with
Multicoupler MC2**
7
Operation mode 1
Operation mode 2
Operation mode 3
The following functions will not operate with HBP -SoftDrive (all LCS systems)
Float function (all LCS systems)New AAC Sensor (ElectroDrive) [loader lowering,
bucket return works] Bucket shake (ElectroDrive)
Hose Burst Protection
Part No 5220738 Part No 5220850
Price £165 Price £900
AAC Sensor
SafeThe bucket movement and loader beam movement are programmed to be synchronised. First, the bucket moves into the pre-set position (set time between 1 to 8 sec). After the bucket has reached the pre-set position, the loader beam will start lowering.
SingleThe bucket will move to the pre-set position, either from dumped or from rolled-back position.The loader beam will not move during the bucket movement.
Only for LCS ElectroDrive Professional from serial no: 40632 and new joystick version from P/N 5101130 >
Specialist EquipmentAAC Sensor (ElectroDrive Pro only) Hose Burst Protection
The sensor controlled AAC (Automatic Angle Control) enables the driver to automatically return the implement to a preset tilt angle.
The Hose Burst Protection kit (HBP) prevents unintentional dropping of the loader or implement in the event of hydraulic hose failure.
Will only mount to premium series loader modelsOne kit mounts to all loader models. Retrospective fit/dealer installation
Designed according to Agricultural machinery – Front loader – Safety standard EN12525:2000+A2:2010
Quick
Lower the loader beam and the bucket willreturn to the pre-set position.
Showing positions of “hold” valves on cylinders.
8
1 4
Part No 5034021 Part No 5034067
2 5
Part No 5034071 Part No 5033973
3 6
Part No 5044970 Part No 5033977
This kit allows LCS Quicke Dimension loaders to mount
onto the previous valve system using ½” quick
release couplings.
Allows LCS loader with Multicoupler and flat face
individual couplers to connect to an existing valve type.
Ideal when using one loader on two tractors - 1 x pre-LCS and
one x LCS. Kit. Kit 1 or 2 also required
Control Valve Conversions Kits
Individual Coupler Kit
Multicoupler Kit
Hose Interface Kit
Pre-LCS LOADER ONTO LCS HYDRAULICS (Old loader to new valve)
LCS LOADER ONTO pre-LCS HYDRAULICS (New loader to old valve) LCS LOADER ONTO pre-LCS HOSE SET (New loader to old valve)Old style 1/2" male coupling interface
This kit allows LCS Quicke Dimension loaders to mount onto the Pre-LCS hose sets using the Multicoupler MC4
and individual flat face couplers.
Female 7 pin - Male multi pin
Flat face female couplings and male Deutsch plug
1/2" female couplings and male 7 pin plug
½” Coupler Kit
Female 7 pin - Male multi pin
£125Price
Male 7 pin - Female multi pinOld style Walvoil or Nord Hydraulic control valve
This kit allows pre-LCS Quicke Dimension loaders to
mount onto the LCS valve system using the
Multicoupler MC4
£295Price
Price £225
Price £295Valve not inc'.
Interface Kit
This kit allows pre-LCS Quicke Dimension loaders to
mount onto the LCS valve system using individual flat
face couplers
This kit allows LCS version Quicke Dimension loaders to
mount onto the previous valve system fitted with Hydro
Quick/MultiDoc.
Male 7 pin - Female multi pin
£80Price Price £195
Hydro Quick Coupler Kit
to fit to
to fit to
Updateto
A 9
(a) 5215241 Part No PricePrice £450 (b) 5220526 5220576 £150
5220450 DS 5220519 DS5220451 DM 5220518 DM5220452 DL 5220517 DL
Part No Price5220293 £65 Price £250 Price £375
Part No Price313411 £120 5048217 £295
QD Loader OptionsSoftDrive c/w Electric Shut Off SoftDrive Electric Control Additional SoftDrive Kit
Required Informationserial number or
loader model, loader widthloader age if LCS ready
Includes - accumulators and In cab electric shutoff
solenoid kit
In cab electric shutoff solenoid kit
(for Dimension series loaders with existing manual control
SoftDrive)
(a) Pre LCS, (b) LCS loaders Additional SoftDrive kit for older Quicke Dimension
loaders Q20 - Q85X loadersMounts in conjuction with existing kit.
Retrospective fitmentRetrospective fitment £125
4th service valve and hoses to tool carrier
Retrospective fitmentRetrospective fit Retrospective fit
SoftDrive 3rd Service Options 4th Service Kit
Retrospective fit
Rocker switch kit to activate SoftDrive on a second tractor
Only required if joystick in second tractor does not have
SoftDrive "toggle" switch.
Standard fitment(LCS ready loaders)
See Other Options page for older loader options
Coloured loadersPlease check for colour
availability with your Alo UK Area Manager.
Coloured Q-Link£100
Coloured Loader
£200
Separate 3rd Service Handle Loader Lights
When loader is operated by tractor
auxilary valve mechanical lever, via
hose kit option
Additional lights for your Quicke loader which are
integrated under the knee plates to follow the position of
the loader beam.(Cannot be used in conjuction with
4th service)
c/w control knob clamp, 7 pin plug and bracket.
LED loader illumination kit for dealer installation.
4th service cannot be used in conjunction with ESVDoes not include
joystick
10
Price £200 5201251 £400 Price £200 5201318 £400
Price £200 830585 £400 Price £200 830600 £400
5220693 Euro 85220699 Euro + 55220704 Euro + 35220708 Euro + MX (a) 5201088
Retrospective fit Price £450 Retrospective fit (b) 5033992See Other Options page for older loader options
(a) Pre LCS, (b) LCS loaders
Alo No 3 Connection Options Trima No 5 (SMS) Connection Options
Mailleux/MX Connection Options Faucheux/McConnel Connection Options
Hydraulic Locking - Q Lock.
Trima No 5 implements
Euro-Combi 8 + MX
Mailleux/MX Implements
Euro-Combi 8 + FX
Faucheuximplements
Will fit Euro No 8 implement hooks
and MX implement hooks.
DM width only
*Factory fit tool carrier
Will fit Euro No 8 implement hooks
and Alo No 3 implement hooks.
*Factory fit tool carrier
Will fit from Euro No 8 tool carrier
to Alo No 3 implement hooks.
Will fit Euro No 8 implement hooks and Trima No 5
(SMS) implement hooks
QD Loader Tool Carrier/Adapter Options
Euro-Combi 8 + 3 Alo No 3 Implements Euro-Combi 8 + 5
*Factory fit tool carrier
Will fit from Euro No 8 tool carrierto Trima No 5
hooks.Retrospective fit adapterRetrospective fit adapter
*Note - Tool carrier prices are for 'Factory Fitment' or 'Special Order'. Tool carriers ordered after delivery incur additional costs.
*Note - Tool carrier prices are for 'Factory Fitment' or 'Special Order'. Tool carriers ordered after delivery incur additional costs.
Part Nos listed are for DM width loaders and LCS
ready loaders
Switch Kit Rocker switch kit to activate Q-Lock on a
second tractor
Retrospective fit adapter
Will fit Euro No 8 implement hooks
and Faucheux implement hooks
DM width only
Will fit from Euro No 8 tool carrier to Faucheux (McConnel)implement hooks.
*Special order tool carrier Retrospective fit adapter
Will fit from Euro No 8 tool carrierto Mailleux/MX
implement hooks.
Selecto Fix OptionsImplement PartLoader Part
Coupler connectedto implement hoses.
Quick coupling mountsto tool carrier. 3/8"
£60
Flat face easy to clean
£50 10550380 £250 10550180
Loader requires 3rd
service
11
1 2 3
Q755 4500123Q770 4500124Q950 4500063Q960 Q970 4500064Q980 4500065
Part No Price Q985 4500066Price £0 60008211 £17 each Price £895
4 5 6
5201154 £395Part No Price
Q310 upto 670 * 3140105201155 £265 Q465 675 695 * 314070
Q720 750 910-940 960 1060 ** 5048136Part No Price Q760 770 950 970-990 10 ** 5048137
5201227 £195 10301570 £90 Other Loader makes 314100
97 8
Part No Price Part No PriceQ230, 330 & 430 313403 Q230, 330 & 430 313404 Euro Combi 246799Q310 340 415 445 450 600 313413 Q310 340 415 445 450 600 313414 Euro No 8 246800Q675 695 700 900 10 10550218 Q675 695 700 900 10 series 313325 £295 E/C 8-5-3 300 to 10 series
4th service required at extra cost (See No 8 )
Hydraulic Locking
Single action multi coupler
Valve Part
* On L/H bearing box** Mounted to crosstube
Complete For use with allhose kit options.
(requires 5201154Hydro Quick).
Does not include Hydro Quick valve
Older loader Series
£450
Other Optional Equipment
Shock Absorbers (older loaders)
DM Subframe Lock & Go ActivatorsQD Loader Bearing Boxes
Factory fitment
DM Bearing Boxes ConversionLCS Conversion maybe rqd'
Extended
No Extra Cost when ordered with new loader
Only for specified loadersExtra cost applied when
ordered after delivery POA .
Activators for Delta subframe on second tractor. 2 required.
↓Older loader options ↓
Note:Activators do not come with
new subframes.
Hydro Quick Pre LCS Hydro Quick Bracket Set Pre LCS
Retrospective fit
Older loader options
Half option
£450
Loader PartHalf option
Hydraulic Services Pre-Dimension loaders
700 series up to 10 series
Solenoid 4th Service kit complete
3rd Service
£495
4th Service
Older loader Series
£495
Solenoid 3rd Service kit complete
Older loader Series
Parallel loaders only
Converts 700/900 UM to mount to DM
Does not include Hydro Quick valve part
Will not fit to LCS valve
12
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptX 6,540 7,040 7,740 7,790 SX OC
X 7,740 8,290 8,990 SX OC
X 7,040 8,290 8,790 DM OC
16,9 x 24 7,040 7,740 8,290 8,590 8,790 DM LS
16,9 x 28 8,540 9,790 10,090 10,390 DM LS
A, F 12,4 x 24 6,540 6,840 7,790 8,090 8,190 DM OC LS
A, F 380/70 R24 7,040 7,740 8,190 8,290 8,590 8,790 8,990 DM OC LS
F 540/65 R24 7,740 8,540 8,990 9,290 9,790 DM OC LS
F 540/65 R28 8,540 9,790 10,090 10,390 DM OC LS
D 480/70 R30 9,790 10,090 10,390 DM LS HK
480/70 R30 10,390 DM LS HK
D, L 480/70 R30 9,990 10,290 10,590 DM HK EY
L 480/70 R30 10,590 DM HK EY
A 12.4 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,590 8,790 DM OC
A 13.6 x 24 6,840 7,040 7,740 8,090 8,190 8,290 8,590 8,790 8,990 DM OC
A 11.2 R24 6,540 7,790 DM OC
R 11.2 x R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
A 14,9 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OCM, Q,
S 280/85 R24 6,540 7,790 DM OC
Q, S 14,9 x 24 6,540 6,840 7,790 8,190 DM OC
A, N 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM LS
A, P 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM LS EY
A 11,2 x 24 6,540 7,790 DM OC
A 13,6 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
A 14,9 x 24 7,040 7,740 8,190 8,290 8,590 8,790 DM OCA DMX subframe priced as DM M Subframe will fit with Folger front linkage Q State if front axle support is cast or welded.D Q66 must have extended bearing boxes. N ErgoDrive will not fit with mid-mount valve R Subframe designed for tier 3 tractorsF Check tractor hydraulic system - LS or OC P ErgoDrive not available S Serial Number of tractor requiredL HK requires loader interface prep (tier 3) CNH 8110-330489 or special HK with front hitch X US subframe - NOT DM Lock & Go* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Prices - £ Sterling
Hyd
raul
ic
Opt
ion
956, 1056 XL CMFD
Case IH
Subf
ram
e
785, 885, 985, 795, 895, 995, 4220 - 4240
PARALLELNON-PARALLEL
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
DM DM
JX 95 and Tier 3
CS 68, CS 75
5120 (Maxxum)
CVX 140, 150, Tier 3 Models (Steyr)
CS 100, CS 110
CS 78, 80, 86, 90, 94, and 85, 95, 100, 105 pro
JX 75, JX 80, JX 85, JX 90 and Tier 3
CVX 160, 175, 195 Tier 3 Models (Steyr)
CX 95 - 105
JX 55 - JX 70 and Tier 3
Farmall 55C, 65C, 75C
5130 - 5250 (Maxxum)
Farmall 95U, 105U, 115U
Farmall 85A, 95A, 105A, 115A
Farmall 75A. 90A, 100A, 110A
844, 856XL CMFD
CVX 120, 130, 150, 1135, 1145, 1155 (Steyr)
CS 120, CS 130, CS 150
Also check out the Versa-X range Also check out the Versa-X rangeFarmall 65A 75A
CX 70 - CX 85
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
CVX 170, 195, 1170, 1190 (Steyr)
Farmall 85C, 95C and 105C EP
Farmall 95U Pro, 105U Pro, 115U Pro
13
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptA 320/70 R24 6,540 7,790 8190 DM OC
A 13,6 x 24 6,540 6,840 7,040 7,740 7,790 8090 8190 8290 8790 DM OC
A 540/65 R24 6,540 6,840 7,040 7,740 7,790 8,090 8,190 8,290 8,790 DM OCC, G,
H, K, T 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DM HK LSC, G,
H, K, T 480/65 R28 7,940 8,740 9,190 9,490 9,990 DM HK LS
H, K, T 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
H, K, T 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DM HK LS
H, K, T 14,9 x 28 7,740 8,540 8,990 9,290 9,790 DM LS
H, K, T 14,9 x 28 7,940 8,740 9,190 9,490 9,990 DM HK LS
H, K, T 540/65 R28 7,940 8,740 9,190 9,490 9,990 DM HK LS
B, G 16,9 x 24 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
B, G 480/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
B,G 540/65 R30 10,390 10,690 DM LS
G 540/65 R28 8,740 9,990 10,290 10,590 10,890 DMX LS
G 540/65 R28 10,590 10,890 DMX LS
C, E G, H 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
C, G, H 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC
J, K,T 540/65 R28 8,740 9,990 10,290 10,590 DM HK EY
J, K,T 600/65 R28 8,740 9,990 10,290 10,590 DM HK EY
K, T, U 600/65 R28 9,040 10,290 10,590 10,890 DM EY E
K, T, U 600/65 R28 10,890 11,190 DM EY E
J, K, T 600/65 R28 10,590 10,890 DM HK EYA DMX subframe priced as DM G Will not fit tractors with wide weight carrier T Order loader ready harness from CNH harness #84167030 and 2 relays #82017871.B Tractor must be equipped with power beyond plate H Deluxe Hose kit only with Multi Controller arm rest U Hydraulic sets do not fit tractors with mid-mount valve. Use standard hose setC Additional kit 10377122 req'd for axle suspension J Deluxe hose kit and hose kit for factory fitted mid-mount valve available. E Check type of front hitch mounted to tractor K Tractor must be ordered with loader ready Multi Controller joystick* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
JXC 1060 - JXC 1095, Quantum 65C - 95C
JXU 70 - JXU 115
Case IHPrices - £ SterlingNON-PARALLEL
Hyd
raul
ic
Opt
ion
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only) Subf
ram
e
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
PARALLELDM DM
MAXXUM 115, 125, 140 Standard 6 cyl EP
MAXXUM 110, 120, 130 MC and CVX 4 cyl EP
MAXXUM 115, 125, 140 M/controller 6 cyl EP
MX 150, MX 170
PUMA 180, 185, 195, 200, 210, 215, 225, 230 + CVX + Multicontroller
PUMA 150, 165, 175 and CVX Tier 4B
PUMA 185, 200, 220 EP & CVX, 240 CVX T4B
MAXXUM 115, 125, 135, 145, 150 M/C CVT T4B
JXU 1070 - JXU 1100
MAXXUM 100, 110, 120, 130 MC, X Line 4 cyl
PUMA 155, 160, 165, 170 + CVX + Multicontroller
MXU 115, MXU 125, MXU 130, MXU 135 + X Line
MXM 120, MXM 130, MXM 140, MXM 155
MXU 100, MXU 110 + X Line
MXM 175, MXM 190
MX 100, MX 110, MX 120, MX 135
MX 80c, MX 90c, MX 100c
PUMA 115, 125, 130, 140, 145 + CVX + Multicontroller
MAXXUM 115, 125, 140 MC and X Line 6 cyl
MAXXUM 110, 120, 130 standard 4 cyl EP
14
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptX 6,540 7,040 7,790 8,290 8,990 SX OC
X 6,540 7,040 8,290 8,990 SX OC
C 440/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
C, H 440/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
B, C, D 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
C, H 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
A 16,9 x 30 10,590 10,890 DMX LS
G, J 340/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
G 340/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
E 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX LS OC
L, M, N 480/65 R28 7,740 8,290 8,590 8,790 8,990 9,290 DM LS HK
E 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
L, M 480/65 R28 9,040 10,290 10,590 10,890 DM EY HK
Q 360/70 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Q 420/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
F 600/70 R28 11,090 11,390 DMX EY HK
F 600/70 R28 Turn to Q88/Q98 page
G 340/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
A, G 440/65R28 7,040 7,740 8,290 8,590 8,790 DM OC
K 320/85 R20 6,540 7,790 8,190 DM OC
K, P 320/85 R20 6,540 7,790 8,190 DM OC
280/70 R18 6,540 7,790 8,190 DM OC
280/70 R20 6,540 7,790 8,190 DM OC
A Will fit with Lemoine front hitch. Will also fit w/o front hitch F Deluxe hose set will only mount to tractor with Bosch hydraulics M Deluxe hose set will not fit with hydraulically extendable trailer hitchB If tractor has original 3.5T front hitch, order DM subframe only G DMX subframe priced as DM N Q46/Q48 must be ordered with extended bearing boxes with front hitch.C Subframe prepared with spacers for front hitch H Check if tractor has Arion style hydraulic system P The hydraulic set will not fit tractors with electro hydraulic valve.D If 3.5 T front hitch mounted, contact Alo UK J Hose kit mounts to midmount valve and electric joystick. Q Order Q36/Q38 with long bearing boxes for tractors with wheels larger than 420/70 R24.E Check if load sensing and or open centre L Check if tractor is fitted with factory fitted siderails X US subframe - NOT DM Lock & Go* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
DMClaas
Arion 610, 620, 630, 640 CIS/CEBIS
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
Axion 810, 820, 830, 840, 850 CIS/CEBIS/C-MATIC
Ceres 75 - 95X (JD engine)
Ceres 75X, 85X 95X
Ares 816, 826, 836
Arion 510, 520, 530, 540 CIS/CEBIS
Arion 410, 420, 430
NON-PARALLEL
Atos 220, 230, 240
Ares 546, 556, 566
Celtis 426, 436, 446, 456
Nectis 217, 227, 237, 257, 267, VL
Ares 547, 557, 567, 577
Ares 616, 626, 636, 656, 696
Ares 617, 657, 697
Arion 620, 630, 640 650 CIS/CEBIS Tier 4i
Arion 530, 540, 550 CIS/CEBIS Tier 4i
Elios 210, 220, 230 and 240 Tier4i
Arion 410, 420, 430, 440, 450, 460 Tier 4
Elios 210, 220, 230 Tier 3
Axos 310, 320, 330, 340
Atos 330, 340, 350
Nectis 227, 247, 257, 267 F
Axion 810, 830, 840, 850 C-MATIC and HEXASHIFT Tier 4
Hyd
raul
ic
Opt
ion
Prices - £ Sterling
Subf
ram
e
PARALLEL
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
DM
15
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptH 420/65 R24 7,040 7,790 8,090 8,190 8,290 DM OC
H 420/65 R24 7,040 7,790 8,090 8,190 8,290 DM OC
H 420/65 R24 7,040 7,790 8,090 8,190 8,290 DM LS HK
K, M 280/85 R20 DSX OC
K 320/70 R20 DSX OC
L 320/70 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
K, S 11.2 R24 6,540 7,790 8,190 DM OC
420/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
320 70 R24 6,540 7,790 DSX OC
N, P 320/85 R20 6,540 7,790 DM OC
R 480/70 R28 7,740 8,540 8,990 9,290 9,790 DM OC
13.6 x 24 7,740 8,990 DM OC
16.9 x 26 7,740 8,540 8,990 9,290 9,790 10,090 DM OC
A 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS OC
13.6 x 24 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
16.9 x 26 7,740 8,540 8,990 9,290 9,790 10,090 DM LS
540/65 R28 8,540 9,790 10,090 10,390 10,690 DM OC
C 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
B 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LSA Check tractor hydraulic system - LS or OC. L If tractor has Lochmann cab contact your area manager HK Deluxe hose kit only (Ergodrive not available)B Adapted for engine type BF6M1013EC M Subframe will fit Agrolux 60, 70 manufactured after 1st Jan 2008 - Power Beyond plate may be required from Deutz on some modelsC Adapted for engine type BF6M2012C N Order aditional set 10412460 for tractor c/w air brakes (extra cost)H Q36/Q38 requires extended bearing boxes R Dynamic mudguards onlyK 4WD tractors only S Will fit tractors with 2 point foldable ROPS or Lochmann cab.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Use the Versa-X range
Use the Versa-X range
Check out the Versa-X range Also check out the Versa-X range
Also check out the Versa-X range
Agrotron 120, 130, 140, 150, 155, 165 MkI & MkII
Agrotron 120, 150, 165 MkIII
Agrotron 120, 130, 150 MkIII
Agrotron 140, 155, 165 MkIII
Agrolux 57, 67
Agrolux 77, 87, 97
Agrotrac 610, 620
Agrotron 4.70, 4.80, 4.85, 4.90, 4.95
Agrotron 6.00, 6.01, 6.05, 6.15
Agrotron 6.20, 6.30, 6.45
Agrotron 80, 85, 90, 100
Agrotron 105, 106, 108, 110, 118, 128
Agroplus 310, 315, 320, 410, 420 & Ecoline
Agrolux 4.75, 410
Agroplus 75, 85, 95, 100
Hyd
raul
ic
Opt
ion
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
PARALLEL Prices - £ Sterling
Subf
ram
e
DM DM
Agrofarm 85, 100
Agrofarm 420, 430 Profiline and TTV
DeutzNON-PARALLEL
Agroplus 67, 77, 87
Agrofarm 410, 420, 430
Agrolux 45, 55, 60, 65, 70, 310, 320
Check out the Versa-X range
Use the Versa-X range
Use the Versa-X range
16
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptF 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
E 540/65 R28 10,890 11,190 DM EY
C 540/65 R28 8,540 8,990 9,290 9,790 10,090 DM LS EY
G 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
G 7,740 8,540 8,990 9,290 9,790 DM LS OC
G, J 540/65 R34 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
G, J 540/65 R34 7,740 8,540 8,990 9,290 9,790 DM LS HK
G 540/65 R28 8,540 8,990 9,290 9,790 DM LS HK
E 540/65 R34 10,890 DM EY E
J, M 540/65 R34 8,240 9,040 8,790 9,090 9,290 9,490 9,790 10,290 DM EY OC
D, E 540/65 R28 8,740 9,990 10,290 10,590 DM HK
600/70 R30 Turn to Q88/Q98 pageJ, Q,
TU
560/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
J, Q 560/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM OC EY
J, Q, X 360/70 R20 6,540 7,790 DM OC EY
W 360/70 R20 6,540 7,790 DM OC EY
H 560/85 R28 7,040 7,790 8,090 8,290 8,790 DM OC EYJ, T, U
V 540/65 R24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS EY
E, G, V 540/65 R24 7,540 8,240 9,040 8,790 9,090 9,290 9,490 9,790 10,290 DM EY HK
E, J, U 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS EY
E 540/65 R28 8,240 9,040 9,490 9,790 10,290 DM EY E
E, J, U 540/65 R28 8,540 9,790 10,090 10,390 DM LS EY
E 540/65 R28 9,040 10,290 10,590 10,890 DM EY EA Check tractor hydraulic system - LS or OC. H Q36/Q38 requires extended bearing boxes U State pump flow rateD Std hose kit available J Order accumulator kit 5034083 with EasyElectroDrive (£150) V If Sauter front hitch fitted, order kit 10418625 at £150E ErgoDrive not available M Subframe will fit Agrolux 60, 70 manufactured after 1st Jan 2008 W Subframe not adapted for under slung (horizontal) exhaust pipe.F If Sauter front hitch fitted, order kit 10418133 at £150 Q Order kit 5034301 for tractors with original front hitch. X Not adapted with underslung exhaustG Electric or Deluxe hose kit only on Profiline L/S verion T Tractors w/o power beyond, order shuttle valve for LS signal. Order from SDF. Ref no: 2.3729.686.0 - Power Beyond plate may be required from Deutz on some models* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Also check out the Versa-X range
Also check out the Versa-X range
Agrotron M600, M610, M615, M620, M625
Agrotron M640
Agrotron TTV 1130, 1145, 1160, TTV610, 620
Also check out the Versa-X range
Also check out the Versa-X range
6180, 6190
6180P, 6190P
6140, 6150, 6160
6140, 6150, 6160 Profiline and TTV
Agrotron TTV 630, TTV7210, TTV7230, TTV7250
5100, 5110, 5120, 5130 Basic, Profiline
6120.4, 6130.4, 6140.4, 6150.4, 6160.4 P and TTV
5090.4G, 5105.4G, 5115.4G
Deutz
Agrotron 180.7
Agrotron 120, 130, 150 and Profiline
Agrotron 150.7, 165.7
5080D, 5090D and Ecoline
5090C, 5100C, 5110C
6120.4, 6130.4, 6140.4, 6150.4, 6160.4
Agrotron K90, K100, K120 and K410, K420, K430
Agrotron K110 and K610
Agrotron M650
Agrotron M410, M420
Agrotron TTV410, TTV420, TTV430
5090.4 D, 5090.4 D Ecoline and 5100.4 D
Prices - £ Sterling
Hyd
raul
ic
Opt
ion
Subf
ram
e
NON-PARALLEL
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
PARALLELDM DM
17
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt405/70 R20 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM LS
13.6 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
480/70 R28 8,540 8,990 9,290 9,790 DM OC
405/70 R20 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
405/70 R20 6,540 7,790 8,190 DM LS HK
6,540 6,840 7,040 7,790 8,190 8,290 8,790 DM LS HK
C 13.6 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
C, F 480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
C, F 480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
C, F, N 540/65 R24 7,540 8,240 8,790 9,090 9,290 9,490 DM EY HK
A, B, H 480/65 R24 7,740 8,990 DM LS HK
A, B, H 540/65 R26 7,740 8,990 9,290 9,790 DM LS HK
540/65 R28 7,940 9,190 9,490 9,990 DM HK EY
H 540/65 R30 8,740 9,990 10,290 10,590 DM HK LS
H 540/65 R30 8,740 10,590 10,890 DM HK LS
M 540/65 R30 9,990 10,290 10,590 10,890 DM HK EY
M 600/60 R30 10,590 10,890 DM HK EY
H, K 540/65 R30 10,590 10,890 DM HK LS
Turn to Q88/Q98 page
Turn to Q88/Q98 page
A Remove front hitch arms when using loader H Fendt CANbus harness required on tier 3 version tractors for 3rd/4th service. 0074.020.208.000B State if tractor is equipped with air tank (for hose kit) J Will only mount to Profi, Profi Plus models M Order 14326171 kit with Special Hose Kit if tractor has 4 hyd outlets below grille (extra cost)C Use counterweight in combination with Q51 or Q56 K 2 front spools required with hose set N The Easy/ElectroDrive will not fit tractors without rear LS & P-connection.F Hose kit adapted to mount to Fendt mullti coupler. L Power beyond required with ElectroDrive* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Also check out the Versa-X range
718 Vario
916, 920, 924, 926, 930 Vario
Fendt
409, 410, 411, 412
307C, 308C, 309C
714, 716, 718 Vario SCR
309, 310, 311, 312, 313 Vario SCR
512, 513, 514, 516 Vario SCR
310, 311, 312, 313 Vario Tier 4
DMPrices - £ Sterling
Subf
ram
e
Hyd
raul
ic
Opt
ion
NON-PARALLEL
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
PARALLEL
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
DM
206S, 207S, 208P, 209P, 210P, 211P
Farmer 304, 305, 306, 307, 308 LS/LSA
Farmer 309, 310 LS/LSA
Favorit 509, 510C
411, 412, 413, 414, 415 Vario
Farmer 311, 312
720, 722, 724 Vario SCR
815, 817, 818, 820 Vario
711, 712, 714, 716 Vario
819, 822, 824, 826, 828 Vario SCR
No subframes available for 900 SCR series.
309, 310, 311, 312, 313 Vario
207, 208, 209, 210, 211Vario
18
Type
Width US USModel Q31 Q33 Q41 Q51 Q36 Q38 Q46 Q48 Q49 Q56 Q66 Q76
Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,120 5,420 5,620 5,920 6,120 6,320 7,120 7,720 Std Opt
X 11,2 x 24 6,540 7,790 S OC
X 6,540 7,790 SX OC
X SX OC
X 11,2 x 25 6,540 7,790 SX OC
X 6,540 7,040 7,790 SX OC
X 12,4 x 24 6,540 7,790 SX OC
X 6,540 7,040 7,790 8,290 SX OC
X 13,6 x 24 6,540 7,040 7,790 8,290 SX OC
14,9 x 24 7,040 8,290 SX OC
14,9 x 24 7,740 8,990 SX OC
14,9 x 28 9,990 10,590 MX OC
14,9 x 28 10,590 MX OC
14,9 x 28 7,740 8,990 SX OC
X S OC
X 6,540 7,790 SX OC
X 12,2 x 24 SX OC
X 6,540 7,040 7,790 8,290 SX OC
X 6,540 7,040 7,790 8,290 SX OC
X 13,6 x 28 7,040 7,740 7,790 8,290 8,990 SX OC
X 13,6 x 28 7,740 8,290 8,990 SX OC
X 7,740 8,290 8,990 SX OCX US and UM subframe - NOT DM Lock & Go
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3 and 8 + 5 add £200
Also check out the Versa-X range
Use the Versa-X range
Use the Versa-X range
Use the Versa-X range
Use the Versa-X range
Use the Versa-X range
Also check out the Versa-X range
Ford
60-66, 60-76, 60-86, 70-66, 70-76, 72-86DT/LP/DTF, 80-66DTF, 80-76DTF, 82-86DT/LP/DTF
65-46, 65-56 and 70-56
65-88 and 65-93
65-94, 82-94 and 88-94
70-88, 72-93, 80-88 and 82-93
160-90
Fiat
F 100, 110, 115, 120, 130 and 140
UM
Hyd
raul
ic
Opt
ion
55-90, 60-90 and 65-90
115-90, 130-90 and 140-90
60-66, 65-66, 70-66 and 80-66
100-90 and 110-90
90-90
70-90, 80-90 and 85-90
US
Use the Versa-X range
Euro tool carrier c/w clic on, 3rd service
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
Prices - £ Sterling
Subf
ram
eFiat & FordPARALLELNON-PARALLEL
7810
4630, 4830, 5030
3430, 3930, 4130
4610 4wd
6810, 7610, 7710
5000, 6600, 5110, 5610, 6410, 6610 4wd
6410, 6610 4wd
6710, 7000, 7410, 7600
19
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptA, B, C 540/65 R34 10,590 10,890 11,190 DM E EY
A Subframe kit WITHOUT grill guard.B Subframe set fits tractors with or without original front linkage.C ElectroDrive Professional is the official recommendation.D Order tractor with high visibility roof* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Fastrac 4160, 4190 and 4220
JCBNON-PARALLEL PARALLEL
DM DM
20
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptX 6,540 7,040 7,740 7,790 8,290 8,990 SX OC
X 7,740 8,990 SX OC
X 6,540 7,790 SX OC
7,040 7,240 7,990 8,290 8,390 8,490 8,790 8,990 DMX OC
D 320/70 R24 DM OC
D 320/70 R24 6,540 7,790 8,190 DM OC
C, F 440/65 R24 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM LS
A 320/85 R24 6,540 7,790 DM LS
6,540 7,790 8,190 DM LS
C, F 440/65 R24 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM oc
380/85 R24 6,540 7,040 7,790 8,090 8,190 8,290 8,790 DM oc
C, F 440/65 R24 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM LS
B 14,9 x 24 7,040 7,740 8,290 8,590 8,790 8,990 9,290 DM LS
B 14,9 x 24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS
540/65 R28 8,540 9,790 10,090 10,390 DM LS
A 540/65 R28 8,540 9,790 10,090 10,390 DM LSA Power beyond plate maybe required F Q36 requires extended bearing boxesB Q46 may require extended bearing boxes depending on tyre size.C Additional drawbar bracket kit 10386279 maybe required (extra cost) X US subframe - NOT DM Lock & GoD Will mount to 24/12 transmission.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Hyd
raul
ic
Opt
ion
JohnDeere
2650, 2850
3350, 3650
5500 - 5510
Prices - £ Sterling
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
NON-PARALLEL PARALLEL
Subf
ram
e
DM DM
6500, 6510, 6600, 6610, 6800, 6810, 6900, 6910
6715
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
6010, 6100, 6110, 6200, 6210,
5620, 5720, 5820
5070M, 5080M, 5090M, 5100M
5080R, 5090R, 5100R
5215, 5315
3200, 3210, 3300, 3310, 3400, 3410
5055E, 5065E, 5075E
5075M, 5085M, 5100M, 5115M (US built)
5080G, 5090G
Also check out the Versa-X range
Also check out the Versa-X range Also check out the Versa-X range
Use the Versa-X rangeUse the Versa-X range
5415, 5515
6300, 6310, 6400, 6410
21
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptA, B, C 540/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HKA, B,C,
H 540/65 R24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK
C, H 540/65 R28 8,540 9,790 10,090 10,390 DM LS HKB, C, E,
G, H 16.9 R24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HKC, E, G, H 420/70 R28 8,540 9,790 10,090 10,390 DM LS HKC, E, G, H 16.9 R28 8,540 9,790 10,090 10,390 DM LS HK
B 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS
B 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS
B, H, J 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK
H, J, M 540/65 R28 8,540 9,790 10,090 10,390 DM LS E
B, H, J 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK
H, J 540/65 R28 8,540 9,790 10,090 10,390 DM LS EY
H, L 540/65 R30 10,390 10,690 DM LS E
H, J 540/65 R30 10,390 10,690 DM LS EY
H, J 600/70 R28 10,390 10,690 DM LS EY
540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
540/65 R30 10,390 10,690 DM LS
C 540/65 R28 9,790 10,090 10,390 10,690 DM LS HK
600/70 R30 Turn to Q88 / Q98 page
540/65 R28 10,390 10,690 DM LS HK
600/70 R30 Turn to Q88 / Q98 pageA Power beyond plate maybe required G Non Premium tractors must be equipped with power beyond plate (order John Deere plate AL171838) B Q46 or Q48 may require extended bearing boxes depending on tyre size. H ErgoDrive will not fit if tractor has a Command Armrest. Use ElectroDriveC Additional drawbar bracket kit 10386279 maybe required (extra cost) J State it tractor is fitted with or without a front linkage.E If transfering hyd set from 6020 to 6030, an inline check valve is required (extra cost) M Q61 will not fit with La Forge front linkage* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Hyd
raul
ic
Opt
ion
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
JohnDeere
NON-PARALLEL PARALLEL Prices - £ Sterling
Subf
ram
e
DM DM
6120, 6215, 6220
6320, 6415, 6420,
6520, 6520, 6615, 6620, 6620, 6820, 6920 TLS
6130, 6230, 6330, 6430
6530, 6534, 6630
6090MC, 6100MC, 6110MC
6090RC, 6100RC, 6110RC
6830, 6930 TLS
6170R, 6190R, 6210R
6175, 6195M and R 6215R Tier 4
7730, 7830, 7930 and 7R and 8R
6110, 6120, 6130M and R T4F
6105, 6115, 6125M and R
6130, 6140, 6150M and R (medium)
7200, 7210, 7300, 7310, 7400, 7410, 7500, 7510
7600, 7610, 7700, 7710, 7800, 7810
7220, 7320, 7420, 7520
6135M, 6145, 6155M and R T4F (medium)
7720, 7820, 7920
7430, 7530
6170M, 6190M, 6210M
22
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptC 360/70 R20 DM OC
B 12.4 X 24 6,540 7,790 8,190 DM OC
B 12.4 X 24 6,540 7,790 8,190 DM OC
320/85 R20 DM OC
440/65 R24 6,540 6,840 7,790 8,190 DM OC
D 12.4 X 24 6,540 6,840 7,790 8,190 DM OC
A 13.6 X 24 7,040 8,290 8,790 DM OC
13.6 X 24 6,540 7,790 8,190 DM OC
A 13.6 X 24 7,040 8,290 8,790 DM OC
A 13.6 X 24 7,740 8,990 DM OC
A 420/70 R24 7,740 8,990 DM OC
A 420/70 R24 7,740 8,990 DM OC
340/85 R24 7,040 8,290 8,790 DM OC
420/70 R24 7,740 8,990 DM OCE, FG, H 540/65R28 8,540 8,990 9,290 9,790 DM OC
A Pressure reducing 10377217 kit req'd E Confirm hydraulic pump typeB Subframe available for 2wd tractors F ErgoDrive will not fit tractors with large armrest, use Easy/ElectrDriveC Counterweight must be used with Q31 loader G If tractor is not equipped with loader ready mounts, order additional kit 60011324.D Hydraulic kit designed for tractors without trailer brake valve H If tractor is loader ready, order special hydraulic set 60012835 instead of std valve option (L/S only)* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
M 135GX
M7131, M7151, M7171
M 95S, M 105S
M 100GX, M 110GX
M 95S, M 105S
M 125X
M 128X
M 130X
M 108S
Hyd
raul
ic
Opt
ion
Subf
ram
e
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Prices - £ SterlingPARALLELDM
Use the Versa-X range
Use the Versa-X range
NON-PARALLEL
M 8560, M 9960
ME 8200
ME 9000
M 8540, M 9540
KubotaME 5700
M 5040, 6040, 7040
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
Use the Versa-X range
Use the Versa-X range
DM
15Check out our full range later in this price list
H Series Bucket
Big Bag Lifter
Multipurpose 4 in 1 Bucket
Flexigrip
Silocut SG
Silograb
Remember to choose from ourrange of quality implements
24
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptX 6,540 7,040 7,740 7,790 8,290 SX OC
X 7,040 7,740 8,290 8,990 SX OC
X 6,540 SX OC
X 6,540 SX OC
D 320/85 R20 6,540 7,790 8,190 DM OC
420/70 R28 8,740 9,990 10,290 10,590 10,890 DMX OC
540/65 R28 10,590 10,890 DMX OC
420/70 R28 8,740 9,990 10,290 10,590 10,890 DMX OC
540/65 R28 10,590 10,890 DMX OC
8,740 9,990 10,290 10,590 10,890 DMX OC
8,740 9,990 10,290 10,590 10,890 DMX OC
14.9 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
7,940 8,740 9,190 9,490 9,990 10,290 DMX OC
C DM OC
C 12.4 R24 6,540 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
B Turn to Q88 / Q98 pageB Easy/ElectroDrive only or Std hose kit only X US subframe - NOT DM Lock & GoC DMX subframe priced as DMD Q36/Q38 requires extended bearing boxes
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Landpower 125, 135, 145
Landpower 165, 185
Also check out the Versa-X range
Use the Versa-X range Use the Versa-X range
Landpower 145 Tier 3
Landpower 165, 180 Tier 3
Alpine 65, 70, 75, 80 , 85 Std
Prices - £ Sterling
Hyd
raul
ic
Opt
ion
Globus 65, 75, 80
Blizzard 85, 95T
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
LandiniPARALLEL
Subf
ram
e
Ghibli 80, 90, 100
Globus 55, 60, 70
NON-PARALLELDM DM
Legend 115, 120, 125, 130, 135 NG
Power Farm 60
Power Farm 75, 80, 85, 90, 95, 100, 105, 110
Legend 140, 145, 160, 165, 180, 185 NG
Powermaster 180, 200, 220
Mythos 115
Mythos 90, 100, 105
25
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt480/65 R24 7,940 8,740 9,190 9,490 9,990 DMX OC
DSX OC
D 300/70 R20 DM OC
D 300/70 R20 6,540 7,790 8,190 DM OC
6,740 7,040 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 9,190 DMX OC
7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
405/70 R20 6,540 7,790 DM OC
340/85 R24 6,540 7,790 8,190 DM OC
6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS
480/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS
480/65 R24 7,740 8,540 8,990 9,290 9,790 DM OC LS
540/65 R28 8,540 9,790 10,090 10,390 DM LS
540/65 R28 10,290 10,590 10,890 DM EY
540/65 R30 10,890 11,190 DM EY
540/65 R30 10,390 10,690 DM LSD Q36/Q38 requires extended bearing boxes
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Vision 80, 85
Use the Versa-X range
Also check out the Versa-X range
DM DM
Use the Versa-X range
Use the Versa-X range
Also check out the Versa-X range
Technofarm 60, 70, 80
Technofarm 75, 85 Tier 2, 80 Tier 3
LandiniPowermondial 100, 110, 115, 120
Rex 75, 85, 95, 105 F/GE/GT Use the Versa-X range
Prices - £ Sterling
Subf
ram
e
Hyd
raul
ic
Opt
ion
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
NON-PARALLEL PARALLEL
Vision 90, 100, 95, 105
4-60, 4-70, 4-75, 4-80
4-90, 4-100, 4-105
5H 80, 5H 90, 5H100, 5H 110, 5H 115
6-120C, 6-130C, 6.140C
6-145L, 6-160L, 6-175L
6-145, 6-160, 6-175
7-145, 7-165, 7-180, 7-185, 7-195, 7-205
7-175 T4i
7-190, 7-215 T4i
7-190, 7-210, 7-220, 7-230, 7-235
5-090 H, 5-100H, 5-110H, 5.115H + new cab
Also check out the Versa-X range
26
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptX 6,540 7,040 7,790 8,290 SX OC
X 6,540 7,790 8,290 SX OC
X 7,740 8,990 SX OC
14.9 R24 6,740 7,040 7,240 7,990 8,290 8,390 8,490 8,990 DMX OC
14.9 R24 6,740 7,040 7,240 7,990 8,290 8,390 8,490 8,990 DMX OC
14.9 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
E 320/85 R20 6,540 7,790 8,190 DM OC
280/70 R20 DM OC
P DM OC
F 12.4 R24 DM OC
Q 320/70 R20 DM OC
420/70 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
13,6 R28 7,940 8,740 9,190 9,490 9,990 DMX OC
420/70 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
13,6 R28 7,940 8,740 9,190 9,490 9,990 DMX OC
E, G 480/65 R28 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
A, J 14,9 x 28 6,740 7,040 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 DMX OC LS
A, H 14,9 x 28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC LS
A, H 480/65 R28 7,940 8,740 9,190 9,490 9,990 10,290 10,590 DMX LS OC
A, H 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
A, H 16.9 R28 8,740 9,990 10,290 10,590 10,890 DMX LS OC
7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 9,190 DMX OC
7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
M 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 9,190 DMX OC
M 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC EY
M, R 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC EYA Lift arms on front hitch must be removed when using loader J Note maximum wheel size Q Subframe adapted for tractors produced after 2008 (T35019)E DMX subframe priced as DM M Check cab - Essential, Exclusif, Efficient for hyd type R If tractor has original front linkage, order 14326575.G Q36/Q38 must have extended bearing boxes. N ErgoDrive not available Exclusif and Efficient cabH Check transmission type P Subframe will not fit with underslung exhaust X US subframe - NOT DM Lock & Go* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
DM
Use the Versa-X range
5608, 5609
3625, 3635, 3640, 3645, 3650, 3655 and 3660 model F/S
3080, 3085, 3090, 3115, 3120, 3125, 6150
3050, 3065, 6110 - 6140 Steepnose
4435, 4445, 4455
5475 (T3)
5440, 5450
5425, 5425, 5435 + Steepnose
5410, 5420, 5430
5460 Sisu, 5465,(T2), 5470 (T2, T3), 5480 (T3)
5445, 5455, 5460 + Steepnose
5465 (T3)
4360, 4370
4260, 4270
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
MasseyFerguson
Also check out the Versa-X range
Use the Versa-X range
DMPrices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
4225, 4235, 4245, 4255
6160, 6170, 6180
3070
PARALLELNON-PARALLEL
375, 390, 398
2430, 2435, 2440
3050, 3065, 6110 - 6140
Use the Versa-X range
3615 Utility, 3625, 3635, 3645 Utility/A-series
410, 420, 430
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Use the Versa-X range Use the Versa-X range
Use the Versa-X range
Use the Versa-X range
5611, 5612, 5613
5610
Use the Versa-X range
3630 A, 3640 A and 3650 A
4325, 4335, 4345, 4355, 4365
27
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt540/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC LS
540/65 R28 7,940 8,740 9,190 9,490 9,990 DMX OC LS
540/65 R28 8,740 9,990 DMX OC LS
A, B, C 14,9 x 28 7,240 7,940 8,490 8,790 8,990 9,190 DMX LS OC
A, B, C 14,9 x 28 7,240 7,940 8,490 8,790 8,990 9,190 DMX LS OC
B, K, L 380/85 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OCA, B C, D 480/65 R28 7,940 8,740 9,190 9,490 9,990 10,290 10,590 DMX LS OC
B 14,9 x 28 8,740 9,990 10,290 10,590 DMX LS OC
A, B, C 480/65 R28 8,740 9,990 10,290 10,590 10,890 DMX LS OC
A, C, D 480/70 R30 10,590 10,890 DMX LS
C 600/65 R28 10,590 10,890 DMX LS
14,9 x 28 7,940 8,740 9,190 9,490 9,990 DMX OC LS
M 14,9 x 28 8,440 9,240 9,690 9,990 10,490 DMX EY
A, B 480/65 R28 8,540 9,790 10,090 10,390 DM LS OC
A, B, D 480/65 R28 8,740 9,990 10,290 10,590 DMX LS OC
F 480/70 R30 10,590 10,890 DMX LS
A, D, F 480/70 R30 10,390 10,690 DM LS
A, D, F 480/70 R30 10,590 10,890 DMX LS
600/65 R28 10,590 10,890 DMX LS
M 16.9 R28 10,490 10,790 11,090 DMX EY E
M 16.9 R28 11,090 11,390 DMX EY E
M 600/65 R28 11,090 11,390 DMX EY E
470/70 R28 10,590 10,890 DMX LSA Lift arms on front hitch must be removed when using loader F Check engine type - Tier 3B Check tractor hydraulic system - LS or OC K Check Serial NumberC Check transmission type - Dyna 6 trans' L Order additional kit 5033878 if tractor has water seperator D DM subframe for tractors with 3.5T linkage. M Check cab - Essential, Exclusive, Efficient for hyd type* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
PARALLELNON-PARALLELDM DM
6445, 6455 + Steepnose
MasseyFerguson
6497, 6499
6235, 6245, 6255, 6255, 6265 + Steepnose
6465, 6475, 6480 2.5T
6260, 6270, 6280
6290
6460, 6470 Dyna 6 T3 Sisu
6465, 6475, 6480 Dyna 6 T3 Sisu
6460, 6470 T2
6475, 6480
6485, 6490, 6495
6612, 6613, 6615 Dyna 4 Essential
6613 Dyna 6, 6614, 6615, 6616 Dyna 6 + VT
8210, 8220
7465, 7475, 7480
7497, 7499 Dyna VT
7465, 7475, 7480
7490, 7495
7485
7485, 7490, 7495
7619, 7620, 7622 Dyna 6 and Dyna-VT
7624, 7624 Dyna-VT, 7626 Dyna 6
7614, 7615 Dyna 4, 7615, 7916, 7618 Dyna 6 + VT
28
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptD 12.4 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
D 6,540 6,840 7,040 7,790 8,190 8,290 8,590 8,790 DM OC
D 6,540 6,840 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM OC
D, H 6,540 6,840 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM OC
6,540 DSX OC
6,540 DSX OCA, BC, E 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
BC, E 14.9 R28 7,740 8,990 9,290 DM LS
BC, E 14.9 R28 7,740 8,990 9,290 DM LSA, B
C, E, G 540/65 R28 8,540 8,990 9,290 9,790 10,090 10,390 DM LSA, B
C, E, G 540/65 R28 8,540 9,790 10,090 10,390 DM LS
A, B, C 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
B, C 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
B, K 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
A, B, C 540/65 R28 10,390 10,690 DM LS
B, C 540/65 R28 10,390 10,690 DM LSA Check tractor spools - Case or Bosch E Check if tractor is Tier 3B Tractor must be equipped with power beyond plate G Subframe will fit with front axle suspension (Tier 3 models).,C Will not fit tractors with wide weight carrier H Counter weight must be used with Q56D DMX subframe priced as DM K If equipped with front linkage some rework may be required.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Sub
fram
e
Prices - £ SterlingNON-PARALLEL PARALLEL
Hyd
raul
ic
Opt
ion
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
DM DM
CX90, CX 100, CX110 T3
MC115 and MC130 Tier 3
F 90, F 100, F 95, F105 - F/GE/XL
MC80, MC90, MC95, MC100, MC105
McCormick
F 80, F 75, F85 - F/GE/XL
C-Max 75, 80, 85, 90, 95, 100, 105, 110
CX70, CX75, CX80, CX85
CX90, CX95, CX100, CX105
Also check out the Versa-X range Also check out the Versa-X range
Also check out the Versa-X range
MTX 165, MTX 185 Tier 2
MTX 155, MTX 175, MTX 200
MC 120 Power 6
MTX 120, MTX 135, MTX 145, MTX 150 Tier 3
MTX 120, MTX 135, MTX 150 Tier 2
MTX 110, MTX 125, MTX 140
MC 135 Power 6
MC105, MC110 Tier 3
Also check out the Versa-X range
29
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt380/70 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
K 10,390 10,690 DM LS
405/70 R20 6,540 7,790 DM OC
L 340/85 R24 6,540 7,790 8,190 DM OC
480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC LS
480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS
480/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS
540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS
540/65 R28 10,890 11,190 DM EY
D 380/70 R24 6,540 6,840 7,040 7,790 8,090 8,290 8,790 DM OC
D 380/70 R24 6,540 6,840 7,040 7,790 8,090 8,290 8,790 DM OC
J 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,290 8,790 DM OC
K 540/65 R30 8,540 9,790 10,090 10,390 DM LS
K 540/65 R30 10,390 10,690 DM LS
B, C, K 8,540 9,790 10,090 10,390 10,690 DM LS
B, C, F 10,390 10,690 DM LSB Tractor must be equipped with power beyond plate J Q31, Q33, Q36, Q38 max wheel size 440/65 R24 ONLYC Will not fit tractors with wide weight carrier K If equipped with front linkage some rework may be required.D DMX subframe priced as DM L Q36/Q38 requires extended bearing boxesF Check S/No of XTX 215* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Hyd
raul
ic
Opt
ion
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
McCormickNON-PARALLEL PARALLEL Prices - £ Sterling
Sub
fram
e
DM DM
T-Max 80, 90, 100,110, 115
TTX 190, TTX 210, TTX 230
X4.50, X4.60, X4.70
X6.420, X6.430
X6.460, X6.470, X6.480 (X6L)
X4-20, X4-30, X4-35, X4-40
X5.20, X5.30, X5.40, X5.50
XTX 185, XTX 200, XTX 215
X7,440, X7.450, X7.460
X7.650, X7.660. X7.670, X7.680
X50.20, X50.30, X50.40. X50.50
X50.20M, X50.30M, X50.40M
X60.20, X60.30, X60.40, X60.50
X70.40, X70.50, X70.60
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
X70.70, X70.80
XTX 145, XTX 165,
30
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptA, G 11.2 x 24 6,540 7,790 8,190 DM OC
280/70 R16 DM OC
A 540/65 x R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
A 540/65 x R24 6,540 7,790 8,190 DM OC
A 540/65 x R24 6,840 7,040 7,740 8,290 8,590 8,790 DM OC
C 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
E, F 480/65 R28 8,990 DM LS
C 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC
B, E 480/65R28 9,790 DM LS
L 540/65 R28 9,040 10,290 10,590 10,890 DM EY HK
B, L 540/65 R28 10,890 DM EY HK
L 600/65 R28 9,040 10,290 10,590 10,890 DM EY HK
L 600/65 R28 10,890 11,190 DM EY HK
N, S 280/85 R24 6,540 7,790 8,190 DM OCN, P, R,
S 14,9 x 24 6,540 6,840 7,790 8,190 DM OC
A 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
A 11.2 R24 6,540 7,790 DM OC
A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
14,9 x 28 7,740 8,540 8,990 9,290 9,790 DM LS OC
540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC
T 540/65 R28 10,290 10,590 10,890 DM EY HK
T, U 600/65 R28 9,040 10,290 10,590 10,890 DM EY HK
B, T 600/65 R28 10,290 10,590 10,890 DM EY HK
T, U 600/65 R28 10,890 11,190 DM EY E
T 600/65 R28 10,890 11,190 DM EY HKA DMX subframe priced as DM L Tractor must be ordered with factory fitted mid-mount valve for hose kit. S Serial Number of tractor requiredB Q66, Q68 must have extended bearing boxes. M HK requires loader interface prep CNH 8110-330489 or special HK with front hitch T Order loader ready harness from CNH harness #84167030 and 2 relays #82017871.C Additional kit 10377122 req'd for axle suspension N Subframe will fit with Folger front linkage U Hydraulic sets do not fit tractors with mid-mount valve. Use standard hose setF Q56, Q58 must have extended bearing boxes. P State if front axle support is cast or welded.G Q36 must have extended bearing boxes for Super steer. R Subframe designed for tier 3 tractors For Euro-C For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
New Holland
T6030, T6050 Plus/Delta, T6070 Plus
T4.75, T4.85, T4.95, T4.105, T4.115
T6030, T6050 Plus/Delta, T6070 Plus, Super Steer
T4020, T4030, T4040, T4050 Super steer
T5030, T5040, T5050, T5060, T5070
T6010, T6020 Plus/Delta, T6040 Elite
TD5040, TD5050
T6010, T6020 Plus/Delta, T6040 Elite, Super Steer
TD5010, TD5020, TD5030
TD4020F, TD4030F, TD4040F
T6050, T6070, T6080, T6090 RC & PC
T6050, T6070, T6080 T6090 S/Str RC & PC
T7030 + Super Steer
Prices - £ SterlingPARALLEL
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
NON-PARALLEL
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
DM DM
T7.170, T7.185, T7.200, T7.210
T7.220 + Super Steer
T7.235, T7.250, T7.260, T7.270 + Super Steer
T4.55, T4.65, T4.75
T7040, T7050, T7060, T7070 + Super Steer
T6.120, T6.140, T6.150, T6.160 + Auto Command
T6.155, T6.165, T6.175
T5.95, T5.105, T5.115 & Electro Command
TD5.65, TD5.75
TD5.75, TD5.90 TD5.100, TD5.110 Tier 3
T7.175, T7.190, T7.210, T7.225 Tier 4B
TD5.85, TD5.95, TD5.105, TD5.115 Tier 4A
T7.230, T7.245, T7.260 and T7.270 Tier4B
T6.145, T6.155, T6.165, T6.175 Tier 4B
Use the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range
Use the Versa-X range
31
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptA 11,2 x 24 6,540 7,790 8,190 DM OC
A 13,6 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 DM OC
A 14,9 x 24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
600/70 R30 DL LS
A 540/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
D 540/65 R28 8,740 9,990 10,290 10,590 DMX LS OC
B 540/65 R28 9,990 10,290 10,590 DMX LS
B 540/65 R28 9,990 10,290 10,590 10,890 DMX LS
540/65 R28 10,590 10,890 DMX LS
600/65 R30 10,590 10,890 DMX LS
A 320/70 R24 DM OC
A, J 320/70 R24 6,540 7,790 8,190 DM OC
380/70R20 6,540 7,790 DS OC
A, G, K 320/70 R24 7,040 7,790 8,090 8,190 DM OC
420/70 R24 7,240 7,940 8,490 8,990 9,190 DMX LS
13,6 x 28 7,940 8,740 9,190 9,490 9,990 DMX LS
C 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
E, F 480/65 R28 8,990 DM LS
C 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC
E 480/65R28 9,790 DM LS
B 480/70 R30 9,990 10,290 10,590 10,890 DMX LS
480/70 R30 10,590 10,890 DMX LS
7,240 7,940 8,490 8,990 9,190 DMX LS OC
7,940 8,740 9,190 9,490 9,990 DMX LS OC
D, H 420/70R28 8,740 9,990 10,290 10,590 10,890 DMX LS OC
D 420/70R28 10,590 10,890 DMX LS OCA DMX subframe priced as DM E To clean air filter, remove loader K 1000kg counterweight required on Q46, Q48, Q49B Q66, Q68 must have extended bearing boxes. F Q56, Q58 must have extended bearing boxes.C Additional kit 10377122 req'd for axle suspension H Check serial No when ordering subframe.D Check tractor hydraulic system - LS or OC J Will fit with Zuidberg front hitch on 85DA and 95DA* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
5640, 6640, 6840, 7740
7840, 8240, 8340
8160, 8260, 8360, M 100, M115, M 135
8560, M 160
TD 55D, TD60D, TD65D, TD70D
TS 90, TS 100, TS 110
TM115, 120, 125, 130, 135, 140, 150, 155
TM135, 140, 150, 155, 165 Super Steer
TM115, 120, 125, 130 Super Steer
TD 75D, TD 80D, TD 85D, TD 90D
TN 55A, TN 65A, TN 75A (and TN models)
TL 70, TL 80, TL 90, TL 100 and TLA
TG 210 ,TG 230, TG 255, TG 285 Super Steer
TM 165, TM 175
TD 95D
TVT 170, TVT 190, TVT 195 T3
New HollandEuro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
TN 55, 60, 65, 70, 75, 85SA (& TNS models)
TM 175, TM 190 Super Steer
TVT 135, TVT 155, TVT 145 T3
TS 100A, TS 110A
TN 65F, 75F, 90F, TN 75FA, 85FA, 95FA
TN 55, 65, 75D & TN 60, 70, 75A, 85, 95DA
TS 100A TS 110A Super Steer
TS 115
TS 115A, TS 125A, TS 135A
TS 115A, TS 125A, TS 135A Super Steer
NON-PARALLEL
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only)
Also check out the Versa-X range
Also check out the Versa-X range
Also check out the Versa-X range Also check out the Versa-X range
Use the Versa-X range Use the Versa-X range
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
PARALLELDM DM
32
Type
Width
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78Std Equip' →
Tractor model NB Max front wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std OptG 360/70 R20 6,540 7,790 DSX OC
G 320/70 R24 6,540 7,790 DSX OC
6,540 7,790 8,190 DM OC
P, U 360/70 R20 6,540 7,790 DM LS EY
P, U 360/70 R20 6,540 7,790 DM LS EY
D 420/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
D 380/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
D, J 380/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
D 420/70 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
H 560/85 R28 7,040 7,790 8,090 8,290 8,790 DM LS EYP, R, S
T 540/65 R24 7,040 7,740 8,290 ` 8,790 8,990 9,290 DM LS
E, P, T 540/65 R24 7,540 8,240 8,790 9,090 9,290 9,490 9,790 DM EY HK
J 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS EY
E 540/65 R28 8,240 9,040 9,490 9,790 10,290 DM EY E
P 540/65 R28 8,540 9,790 10,090 10,390 DM LS EY
E 540/65 R28 9,040 10,290 10,590 10,890 DM EY E
H 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
F,H, M 540/65 R34 8,240 9,040 8,790 9,090 9,290 9,490 9,790 10,290 DM EY OCD Q36, Q38 must be equippied with extended bearing boxes P Order accumulator kit 5034083 with EasyElectroDrive (extra cost)E ErgoDrive not available R Tractors w/o power beyond, order shuttle valve for LS signal. Order from SDF. Ref no: 2.3729.686.0H ElectroDrive or Deluxe hose kit only on Continuo/Hiline L/S verion S State pump flow rateJ DMX subframe priced as DM T If Sauter front hitch fitted, order kit 10418625 at £150M If Sauter front hitch fitted, order kit 10418133 at £150 U Subframe not adapted for under slung (horizontal) exhaust pipe.* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
Iron 100, 110, 120, 125 (4 cyl)
Iron 115, 125, 135, 155
Dorado 76, 85, 86
Fortis 120.4, 130.4, 140.4, 150.4, 160.4 Infinity and Continuo
Fortis 120.4, 130.4, 140.4, 150.4, 160.4
Fortis 180, 190 Hi-Line, 180, 190 Continuo
Explorer 85, 95
Explorer 3 85, 100, 110
Fortis 150, 160, L 150 and L 160
Fortis 150, 160 Hi-Line, L 160 Continuo
Fortis 180, 190
Explorer 3 90, 105
Explorer 90.4, 105.4, 115.4 Tier 4
Dorrado 80, 90 Classic T4i
Hyd
raul
ic
Opt
ion
Explorer 70 II, 75, 80 II, 90 II, 95 and Classic
SamePARALLELNON-PARALLEL Prices - £ Sterling
Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)Euro T/C c/w clic on, 3rd