Post on 07-Aug-2018
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
1/51
SDD_lookup.slx
Design Description
The MathWorks, Inc.
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
2/51
SDD_lookup.slx
2
SDD_lookup.slx: Design DescriptionThe MathWorks, Inc.
Publication date 13-Aug-2015 03:58:18
Copyright © 2015
For Internal Distribution Only
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
3/51
iii
Table of Contents
1. Model Version ............................................................. ................................................... 1
2. Root System ................................................................................... ................................ 2
Description ................................................. ........................................................ ........ 2
Blocks ....................................................................................................................... 2
Parameters .................................................................. ....................................... 2Block Execution Order ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ...... ..... ...... ..... .... 16
3. Subsystems ........................................................................ ........................................... 18
Increment Real World ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... .. 18
Blocks .................................................... ........................................................ . 18
LimitedCounter ................................................ ........................................................ . 21
Blocks .................................................... ........................................................ . 21
Repeating Sequence Stair3 ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ...... .. 23
Blocks .................................................... ........................................................ . 23
Wrap To Zero ...................... ........................................................ ............................. 26
Blocks .................................................... ........................................................ . 26
4. System Design Variables ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ... 29
Design Variable Details ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ..... 29
5. System Model Configuration ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ...... .... 31
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
4/51
iv
List of Figures
2.1. SDD_lookup ..................................................... ........................................................ .... 2
2.2. Direct1 (Element output) ................................................................................................ 4
2.3. InterpPre ............................... ........................................................ .............................. 6
2.4. Lookup Table ... ....................................................... ..................................................... 7
2.5. Lookup2d .................................................................... ................................................ 92.6. LookupNd ................................................ ....................................................... ........... 11
2.7. Prelookup .................................................... ........................................................ ....... 13
3.1. SDD_lookup/Repeating Sequence Stair3/LimitedCounter/Increment Real World .. .. .. .. .. .. .. .. .. .. .. 18
3.2. SDD_lookup/Repeating Sequence Stair3/LimitedCounter ...... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 21
3.3. SDD_lookup/Repeating Sequence Stair3 ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... .. 23
3.4. SDD_lookup/Repeating Sequence Stair3/LimitedCounter/Wrap To Zero .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 26
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
5/51
v
List of Tables
2.1. "Constant" Parameters .................................................................................................... 2
2.2. "Constant1" Parameters .................................................................................................. 3
2.3. "Direct1" Parameters ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... 3
2.4. Direct1 (Element output) (:,:) ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... . 4
2.5. "dyn" Parameters ............................................... ........................................................... 52.6. "InterpPre" Parameters ..................................................... .............................................. 5
2.7. InterpPre (:,:) ................................................................................................................ 6
2.8. "Lookup Table" Parameters ............................................................................................ 7
2.9. Lookup Table ............................................................................................................... 7
2.10. "Lookup2d" Parameters ................................................................................................ 8
2.11. Lookup2d ....................................................................... ............................................ 9
2.12. "LookupNd" Parameters ............................................................................................... 9
2.13. LookupNd (:,:) ............................. ............................................................................. 11
2.14. "Prelookup" Parameters .............................................................................................. 11
2.15. Prelookup (:,:) ...... ..................................................................................................... 13
2.16. "Sine Wave1" Parameters .... ... ..................................................................................... 13
2.17. "Sine Wave2" Parameters ... ...... ...... ..... ........................................................................ 14
2.18. "Sine Wave3" Parameters ............................................................................................ 14
2.19. "Sine Wave4" Parameters ............................................................................................ 15
2.20. "Sine Wave5" Parameters .... ... ..................................................................................... 15
2.21. "Sine Wave6" Parameters ............................................................................................ 16
2.22. "Sine Wave7" Parameters ............................................................................................ 16
3.1. "FixPt Constant" Parameters .. ... ... .................................................................................. 18
3.2. "FixPt Data Type Duplicate" Parameters .......................................................................... 19
3.3. "FixPt Sum1" Parameters .............................................................................................. 19
3.4. "u" Parameters ............................................................................................................ 20
3.5. "y" Parameters ............................................................................................................ 20
3.6. "Data Type Propagation" Parameters ............................................................................... 21
3.7. "Force to be scalar" Parameters ...................................................................................... 21
3.8. "Output" Parameters ... ..... ...... ...................................................................................... 223.9. "y" Parameters ............................................................................................................ 22
3.10. "Force to be scalar" Parameters .... ...... ..... ...... ..... ...... .................................................... 23
3.11. "Out" Parameters .................................... ................................................................... 24
3.12. "Output" Parameters ................................................................................................... 24
3.13. "Vector" Parameters ................................................................................................... 25
3.14. "y" Parameters ................... ....................................................................................... 25
3.15. "Constant" Parameters ................................................................................................ 26
3.16. "FixPt Data Type Duplicate1" Parameters ...................................................................... 27
3.17. "FixPt Switch" Parameters ........................................................................................... 27
3.18. "U" Parameters ........ ............................. ..................................................................... 28
3.19. "Y" Parameters ... ....................................................................................................... 28
4.1. OutDataType .............................................................................................................. 29
5.1. SDD_lookup Configuration Set ...................................................................................... 315.2. SDD_lookup Configuration Set.Components(1) ................................................................. 31
5.3. SDD_lookup Configuration Set.Components(2) ................................................................. 32
5.4. SDD_lookup Configuration Set.Components(3) ................................................................. 33
5.5. SDD_lookup Configuration Set.Components(4) ................................................................. 34
5.6. SDD_lookup Configuration Set.Components(5) ................................................................. 37
5.7. SDD_lookup Configuration Set.Components(6) ................................................................. 38
5.8. SDD_lookup Configuration Set.Components(7) .......................................................... ....... 38
5.9. SDD_lookup Configuration Set.Components(8) ................................................ ................. 39
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
6/51
SDD_lookup.slx
vi
5.10. SDD_lookup Configuration Set.Components(9) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41
5.11. SDD_lookup Configuration Set.Components(8).Components(1) .. ... ... ... ... ... ... ... ... ... ... ... ... ... . 42
5.12. SDD_lookup Configuration Set.Components(8).Components(2) .. ... ... ... ... ... ... ... ... ... ... ... ... ... . 43
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
7/51
1
Chapter 1. Model VersionVersion: 1.57
Last modified: Wed Mar 13 06:38:38 2013
Checksum: 1019658956 4066013047 747437561 3954250897
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
8/51
2
Chapter 2. Root System
Table of Contents
Description ............................................... ........................................................ .................. 2
Blocks ............................................................................................................................... 2
Parameters ................................................................ ................................................. 2
Block Execution Order ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... 16
Figure 2.1. SDD_lookup
Copyright 2009-2011 The MathWorks, Inc.
This model should contain all blocks in the Lookup Tables library that aren't actually masked s ubsystems .
x
xdat
ydat
y
dyn
Sine Wave7
Sine Wave6
Sine Wave5
Sine Wave4
Sine Wave3
Sine Wave2
Sine Wave1
Repeating
Sequence
Stair3
k
f f
u
k
Prelookup
Simulink Report Ge nerator (SDD Repo rt) Test ModelSDD_lookup
2-DT(u)u1
u2
LookupNdLookup2d
Lookup Table
1-D T(k,f)k1
f1
InterpPre
1-D T[k]
Direct1
[3 4 5]
Constant1
[-1 0 1]
Constant
Description
Simulink Report Generator (SDD Report) Test Model
Blocks
Parameters
"Constant" (Constant)
Table 2.1. "Constant" Parameters
Parameter Value
Constant value [-1 0 1]
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
9/51
Root System
3
Parameter Value
Interpret vector paramet-
ers as 1-D
on
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"Constant1" (Constant)
Table 2.2. "Constant1" Parameters
Parameter Value
Constant value [3 4 5]
Interpret vector paramet-
ers as 1-D
on
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Constant value'
Lock output data type se-tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"Direct1" (LookupNDDirect)
Table 2.3. "Direct1" Parameters
Parameter Value
Number of table dimens-
ions
1
Inputs select this object
from table
Element
Make table an input off
Table data 1:10;
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
10/51
Root System
4
Parameter Value
Diagnostic for out-of-ra-
nge input
Warning
Sample time (-1 for inhe-
rited)
-1
Table minimum []
Table maximum []
Table data type Inherit: Inherit from 'Table data'
Lock data type settings
against changes by the fi-
xed-point tools
off
Figure 2.2. Direct1 (Element output)
Table 2.4. Direct1 (Element output) (:,:)
[0] 1
[1] 2
[2] 3
[3] 4
[4] 5
[5] 6
[6] 7
[7] 8
[8] 9
[9] 10
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
11/51
Root System
5
"dyn" (S-Function)
Table 2.5. "dyn" Parameters
Parameter Value
SimulinkmasksLookup-Method_MP
Interpolation-Use End Values
SimulinkmasksOutputDa-
taType_MP
float('double')
SimulinkmasksLockOut-
putDataTypeAgainstFxp-
Tools_MP
off
SimulinkmasksIntegerR-
oundingMode_MP
Floor
SimulinkmasksSaturateT-
oMaxOrMinWhenOverfl-
owsOccur_MP
off
"InterpPre" (Interpolation_n-D)
Table 2.6. "InterpPre" Parameters
Parameter Value
Number of table dimens-
ions
1
Table data source Dialog
Table data 1:10
Interpolation method Linear
Extrapolation method Linear
Diagnostic for out-of-ra-
nge input
None
Remove protection agai-
nst out-of-range index in
generated code
off
Valid index input may re-
ach last index
off
Number of sub-table sel-
ection dimensions
0
Sample time (-1 for inhe-
rited)
-1
Output minimum []
Output maximum []
Output data type Inherit: Inherit from 'Table data'
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
12/51
Root System
6
Parameter Value
Internal rule priority Precision
Lock data type settings
against changes by the fi-
xed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-
low
off
Table minimum []
Table maximum []
Table data type Inherit: Same as output
Intermediate results data
type
Inherit: Same as output
Figure 2.3. InterpPre
Table 2.7. InterpPre (:,:)
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
13/51
Root System
7
"Lookup Table" (Lookup)
Table 2.8. "Lookup Table" Parameters
Parameter Value
Vector of input values [-5:5]
Table data [-5:5]
Lookup method Interpolation-Extrapolation
Output minimum []
Output maximum []
Output data type Inherit: Same as input
Lock output data type se-
tting against changes by
the fixed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-
low
off
Sample time (-1 for inhe-
rited)
-1
Figure 2.4. Lookup Table
Table 2.9. Lookup Table
-5 -5
-4 -4
-3 -3
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
14/51
Root System
8
-2 -2
-1 -1
0 0
1 1
2 2
3 3
4 4
5 5
"Lookup2d" (Lookup2D)
Table 2.10. "Lookup2d" Parameters
Parameter Value
Row index input values [1:3]
Column index input valu-
es
[1:3]
Table data [1 2 3; 4 5 6; 7 8 9]
Lookup method Interpolation-Extrapolation
Require all inputs to have
the same data type
off
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
Lock output data type se-
tting against changes by
the fixed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-
low
off
Sample time (-1 for inhe-
rited)
-1
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
15/51
Root System
9
Figure 2.5. Lookup2d
Table 2.11. Lookup2d
1 2 3
1 1 2 3
2 4 5 6
3 7 8 9
"LookupNd" (Lookup_n-D)
Table 2.12. "LookupNd" Parameters
Parameter Value
Number of table dimens-
ions
2
Breakpoints specification Explicit values
Breakpoints for dimensi-
on 1
1:3
Breakpoints for dimensi-
on 2
1:3
Breakpoints First Pointfor dimension 1
1
Breakpoints First Point
for dimension 2
1
Breakpoints Spacing for
dimension 1
1
Breakpoints Spacing for
dimension 2
1
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
16/51
Root System
10
Parameter Value
Breakpoints minimum
for dimension 1
[]
Breakpoints minimum
for dimension 2
[]
Breakpoints maximumfor dimension 1
[]
Breakpoints maximum
for dimension 2
[]
Breakpoints data type for
dimension 1
Inherit: Same as corresponding input
Breakpoints data type for
dimension 2
Inherit: Same as corresponding input
Index search method Binary search
Begin index search using
previous index result
off
Use one input port for all
input data
off
Table data [1 2 3; 4 5 6; 7 9 8]
Table minimum []
Table maximum []
Table data type Inherit: Same as output
Intermediate results data
type
Inherit: Same as output
Interpolation method Linear
Extrapolation method Linear
Diagnostic for out-of-ra-
nge input
None
Remove protection agai-
nst out-of-range input in
generated code
off
Use last table value for
inputs at or above last br-
eakpoint
off
Sample time (-1 for inhe-
rited)
-1
Internal rule priority PrecisionRequire all inputs to have
the same data type
on
Output minimum []
Output maximum []
Output data type Inherit: Same as first input
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
17/51
Root System
11
Parameter Value
Lock data type settings
against changes by the fi-
xed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-low
off
Fraction data type Inherit: Inherit via internal rule
Support tunable table size
in code generation
off
Maximum indices for ea-
ch dimension
[]
Figure 2.6. LookupNd
Table 2.13. LookupNd (:,:)
1 2 3
1 1 2 3
2 4 5 6
3 7 9 8
"Prelookup" (PreLookup)
Table 2.14. "Prelookup" Parameters
Parameter Value
Breakpoints source Dialog
Breakpoints 1:10
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
18/51
Root System
12
Parameter Value
Specification Explicit values
Number of points 11
First point 10
Spacing 10
Index search method Binary search
Begin index search using
previous index result
off
Output only the index off
Extrapolation method Linear
Use last breakpoint for
input at or above upper li-
mit
off
Remove protection agai-
nst out-of-range input in
generated code
off
Diagnostic for out-of-ra-
nge input
None
Breakpoint minimum []
Breakpoint maximum []
Parameter data type Inherit: Same as input
Index data type uint32
Fraction data type Inherit: Inherit via internal rule
Lock output data type se-
tting against changes by
the fixed-point tools
off
Integer rounding mode Floor
Sample time (-1 for inhe-
rited)
-1
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
19/51
Root System
13
Figure 2.7. Prelookup
Table 2.15. Prelookup (:,:)
1 0
2 1
3 2
4 3
5 4
6 5
7 6
8 7
9 8
10 9
"Sine Wave1" (Sin)
Table 2.16. "Sine Wave1" Parameters
Parameter Value
Sine type Time based
Time (t) Use simulation time
Amplitude 1
Bias 1.5
Frequency (rad/sec) 1
Phase (rad) 0
Samples per period 10
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
20/51
Root System
14
Parameter Value
Number of offset sampl-
es
0
Sample time 0
Interpret vector paramet-
ers as 1-D
on
"Sine Wave2" (Sin)
Table 2.17. "Sine Wave2" Parameters
Parameter Value
Sine type Time based
Time (t) Use simulation time
Amplitude 1
Bias 0
Frequency (rad/sec) 1
Phase (rad) 0
Samples per period 10
Number of offset sampl-
es
0
Sample time 0
Interpret vector paramet-
ers as 1-D
on
"Sine Wave3" (Sin)
Table 2.18. "Sine Wave3" Parameters
Parameter Value
Sine type Time based
Time (t) Use simulation time
Amplitude 1
Bias 1.5
Frequency (rad/sec) 1
Phase (rad) 0
Samples per period 10
Number of offset sampl-
es
0
Sample time 0
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
21/51
Root System
15
Parameter Value
Interpret vector paramet-
ers as 1-D
on
"Sine Wave4" (Sin)
Table 2.19. "Sine Wave4" Parameters
Parameter Value
Sine type Time based
Time (t) Use simulation time
Amplitude 1
Bias 1.5
Frequency (rad/sec) 1
Phase (rad) 0
Samples per period 10
Number of offset sampl-
es
0
Sample time 0
Interpret vector paramet-
ers as 1-D
on
"Sine Wave5" (Sin)
Table 2.20. "Sine Wave5" Parameters
Parameter Value
Sine type Time based
Time (t) Use simulation time
Amplitude 1
Bias 0
Frequency (rad/sec) 1
Phase (rad) 0
Samples per period 10
Number of offset sampl-
es
0
Sample time 0
Interpret vector paramet-
ers as 1-D
on
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
22/51
Root System
16
"Sine Wave6" (Sin)
Table 2.21. "Sine Wave6" Parameters
Parameter Value
Sine type Time basedTime (t) Use simulation time
Amplitude 1
Bias 1.5
Frequency (rad/sec) 1
Phase (rad) 0
Samples per period 10
Number of offset sampl-
es
0
Sample time 0
Interpret vector paramet-ers as 1-D
on
"Sine Wave7" (Sin)
Table 2.22. "Sine Wave7" Parameters
Parameter Value
Sine type Time based
Time (t) Use simulation timeAmplitude 1
Bias 1.5
Frequency (rad/sec) 1
Phase (rad) 0
Samples per period 10
Number of offset sampl-
es
0
Sample time 0
Interpret vector paramet-
ers as 1-D
on
Block Execution Order
1. Constant [2] (Constant)
2. Constant1 [3] (Constant)
3. Sine Wave5 [15] (Sin)
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
23/51
Root System
17
4. dyn [4] (S-Function)
5. Output [22] (UnitDelay)
6. Vector [25] (Constant)
7. Output [24] (MultiPortSwitch)
8. Out [24] (SignalConversion)
9. Direct1 [3] (LookupNDDirect)
10. Data Type Propagation [21] (S-Function)11. FixPt Data Type Duplicate [19] (DataTypeDuplicate)
12. FixPt Constant [18] (Constant)
13. FixPt Sum1 [19] (Sum)
14. FixPt Data Type Duplicate1 [27] (DataTypeDuplicate)
15. Constant [26] (Constant)
16. FixPt Switch [27] (Switch)
17. Sine Wave1 [13] (Sin)
18. Prelookup [11] (PreLookup)
19. InterpPre [5] (Interpolation_n-D)
20. Sine Wave2 [14] (Sin)
21. Lookup Table [7] (Lookup)
22. Sine Wave3 [14] (Sin)
23. Sine Wave6 [15] (Sin)24. Lookup2d [8] (Lookup2D)
25. Sine Wave7 [16] (Sin)
26. Sine Wave4 [15] (Sin)
27. LookupNd [9] (Lookup_n-D)
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
24/51
18
Chapter 3. Subsystems
Table of Contents
Increment Real World ...... ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... .... 18
Blocks .................................................. ........................................................ ........... 18
LimitedCounter ....................................................... ........................................................ .. 21
Blocks .................................................. ........................................................ ........... 21
Repeating Sequence Stair3 ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... .... 23
Blocks .................................................. ........................................................ ........... 23
Wrap To Zero ............................................... ....................................................... ............. 26
Blocks .................................................. ........................................................ ........... 26
Increment Real World
Figure 3.1. SDD_lookup/Repeating Sequence Stair3/LimitedCounter/Increment
Real World
1
y
SameDT
1
1
u
Blocks
Parameters
"FixPt Constant" (Constant)
Table 3.1. "FixPt Constant" Parameters
Parameter Value
Constant value 1
Interpret vector paramet-
ers as 1-D
on
Output minimum []
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
25/51
Subsystems
19
Parameter Value
Output maximum []
Output data type Inherit: Inherit via back propagation
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"FixPt Data Type Duplicate" (DataTypeDuplicate)
Table 3.2. "FixPt Data Type Duplicate" Parameters
Parameter Value
Number of input ports 3
"FixPt Sum1" (Sum)
Table 3.3. "FixPt Sum1" Parameters
Parameter Value
Icon shape rectangular
List of signs ++
Sum over All dimensions
Dimension 1
Require all inputs to have
the same data type
on
Accumulator data type Inherit: Inherit via internal rule
Output minimum []
Output maximum []
Output data type Inherit: Inherit via back propagation
Lock data type settings
against changes by the fi-
xed-point tools
on
Integer rounding mode Floor
Saturate on integer overf-
low
off
Sample time (-1 for inhe-
rited)
-1
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
26/51
Subsystems
20
"u" (Inport)
Table 3.4. "u" Parameters
Parameter Value
Port number 1Port dimensions (-1 for
inherited)
-1
Sample time (-1 for inhe-
rited)
-1
Minimum []
Maximum []
Data type Inherit: auto
"y" (Outport)
Table 3.5. "y" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data type se-
tting against changes by
the fixed-point tools
off
Output as nonvirtual bus
in parent model
off
Port dimensions (-1 for
inherited)
-1
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
Source of initial outputvalue
Dialog
Output when disabled held
Initial output []
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
27/51
Subsystems
21
LimitedCounter
Figure 3.2. SDD_lookup/Repeating Sequence Stair3/LimitedCounter
1
y
Wrap To Zero
z
1V++
Increment
Real World
D:1
Force to be s calar
Ref1
Ref2
Prop
Data Type
Propagation
Blocks
Parameters
"Data Type Propagation" (S-Function)
Table 3.6. "Data Type Propagation" Parameters
Parameter Value
Simulinkmasksx1Propag-
atedDataType_MP
Specify via dialog
Simulinkmasksx11Propa-
gatedDataTypeegFixdt1-
16Fixdtsingle_MP
uint(nbits)
Simulinkmasksx2Propag-
atedScaling_MP
Specify via dialog
Simulinkmasksx21Prop-
agatedScalingSlopeEg29-
OrSlopeBiasEg1253_MP
1
"Force to be scalar" (SignalSpecification)
Table 3.7. "Force to be scalar" Parameters
Parameter Value
Minimum []
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
28/51
Subsystems
22
Parameter Value
Maximum []
Data type Inherit: auto
Lock output data type se-
tting against changes by
the fixed-point tools
off
Require nonvirtual bus off
Dimensions (-1 for inher-
ited)
1
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
"Output" (UnitDelay)
Table 3.8. "Output" Parameters
Parameter Value
Initial condition 0.0
Input processing Inherited
Sample time (-1 for inhe-
rited)
tsamp
State name must resolve
to Simulink signal object
off
"y" (Outport)
Table 3.9. "y" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data type se-
tting against changes by
the fixed-point tools
off
Output as nonvirtual bus
in parent model
off
Port dimensions (-1 for
inherited)
-1
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
29/51
Subsystems
23
Parameter Value
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
Source of initial output
value
Dialog
Output when disabled held
Initial output []
Repeating Sequence Stair3
Figure 3.3. SDD_lookup/Repeating Sequence Stair3
1
y
OutValues
Vector
0
Output
Ou t
lim
LimitedCounter
D:1
Force to be s calar
Blocks
Parameters
"Force to be scalar" (SignalSpecification)
Table 3.10. "Force to be scalar" Parameters
Parameter Value
Minimum []
Maximum []Data type Inherit: auto
Lock output data type se-
tting against changes by
the fixed-point tools
off
Require nonvirtual bus off
Dimensions (-1 for inher-
ited)
1
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
30/51
Subsystems
24
Parameter Value
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
"Out" (SignalConversion)
Table 3.11. "Out" Parameters
Parameter Value
Output Signal copy
Data type Inherit: auto
Exclude this block from
'Block reduction' optimi-
zation
off
"Output" (MultiPortSwitch)
Table 3.12. "Output" Parameters
Parameter Value
Data port order Zero-based contiguous
Number of data ports 1
Data port indices (e.g. {1,
[2,3]})
{1,2,3}
Data port for default case Last data port
Diagnostic for default ca-
se
Error
Require all data port inp-
uts to have the same data
type
off
Output minimum OutMin
Output maximum OutMax
Output data type Inherit: Inherit via internal rule
Lock output data type se-tting against changes by
the fixed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-
low
off
Sample time (-1 for inhe-
rited)
tsamp
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
31/51
Subsystems
25
Parameter Value
Allow different data inp-
ut sizes (Results in varia-
ble-size output signal)
off
"Vector" (Constant)
Table 3.13. "Vector" Parameters
Parameter Value
Constant value OutValues
Interpret vector paramet-
ers as 1-D
on
Output minimum OutMin
Output maximum OutMax
Output data type OutDataTypeStr
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"y" (Outport)
Table 3.14. "y" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum OutMin
Maximum OutMax
Data type Inherit: auto
Lock output data type se-
tting against changes by
the fixed-point tools
off
Output as nonvirtual bus
in parent model
off
Port dimensions (-1 for
inherited)
-1
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
32/51
Subsystems
26
Parameter Value
Source of initial output
value
Dialog
Output when disabled held
Initial output []
Wrap To Zero
Figure 3.4. SDD_lookup/Repeating Sequence Stair3/LimitedCounter/Wrap To
Zero
U(k)1
Y
> 4
SameDT
0
1
U
Blocks
Parameters
"Constant" (Constant)
Table 3.15. "Constant" Parameters
Parameter Value
Constant value 0
Interpret vector paramet-
ers as 1-D
on
Output minimum []
Output maximum []
Output data type Inherit: Inherit via back propagation
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
33/51
Subsystems
27
Parameter Value
Lock output data type se-
tting against changes by
the fixed-point tools
off
Sample time inf
Frame period inf
"FixPt Data Type Duplicate1" (DataTypeDuplicate)
Table 3.16. "FixPt Data Type Duplicate1" Parameters
Parameter Value
Number of input ports 3
"FixPt Switch" (Switch)
Table 3.17. "FixPt Switch" Parameters
Parameter Value
Criteria for passing first
input
u2 > Threshold
Threshold Threshold
Require all data port inp-
uts to have the same data
type
off
Output minimum []
Output maximum []
Output data type Inherit: Inherit via back propagation
Lock output data type se-
tting against changes by
the fixed-point tools
off
Integer rounding mode Floor
Saturate on integer overf-
low
off
Enable zero-crossing det-ection off
Sample time (-1 for inhe-
rited)
-1
Allow different data inp-
ut sizes (Results in varia-
ble-size output signal)
off
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
34/51
Subsystems
28
"U" (Inport)
Table 3.18. "U" Parameters
Parameter Value
Port number 1
Port dimensions (-1 for
inherited)
-1
Sample time (-1 for inhe-
rited)
-1
Minimum []
Maximum []
Data type Inherit: auto
"Y" (Outport)
Table 3.19. "Y" Parameters
Parameter Value
Port number 1
Icon display Port number
Minimum []
Maximum []
Data type Inherit: auto
Lock output data type se-
tting against changes bythe fixed-point tools
off
Output as nonvirtual bus
in parent model
off
Port dimensions (-1 for
inherited)
-1
Variable-size signal Inherit
Sample time (-1 for inhe-
rited)
-1
Source of initial output
value
Dialog
Output when disabled held
Initial output 0
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
35/51
29
Chapter 4. System Design Variables
Table of Contents
Design Variable Details ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... . 29
Design Variable Details
DblOver. 0
Used by Blocks:
• SDD_lookup/dyn [4]
Resolved in: mask workspace (SDD_lookup/dyn)
DoSatur. 0
Used by Blocks:
• SDD_lookup/dyn [4]
Resolved in: mask workspace (SDD_lookup/dyn)
LookUpMeth. 2
Used by Blocks:
• SDD_lookup/dyn [4]
Resolved in: mask workspace (SDD_lookup/dyn)
Table 4.1. OutDataType
Property Value
DataTypeMode Double
Signedness Signed
SignednessBool true
WordLength 64
FixedExponent 0
FractionLength 0
Slope 1
SlopeAdjustmentFactor 1
Bias 0
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
36/51
System Design Variables
30
DataTypeOverride Inherit
IsAlias false
Description
DataScope Auto
HeaderFile
Used by Blocks:
• SDD_lookup/dyn [4]
Resolved in: mask workspace (SDD_lookup/dyn)
OutScaling. 9.7656e-04
Used by Blocks:
• SDD_lookup/dyn [4]
Resolved in: mask workspace (SDD_lookup/dyn)
OutputDataTypeScalingMode. 1
Used by Blocks:
• SDD_lookup/dyn [4]
Resolved in: mask workspace (SDD_lookup/dyn)
RndMeth. 3
Used by Blocks:
• SDD_lookup/dyn [4]
Resolved in: mask workspace (SDD_lookup/dyn)
dolog. 0
Used by Blocks:
• SDD_lookup/dyn [4]
Resolved in: mask workspace (SDD_lookup/dyn)
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
37/51
31
Chapter 5. System Model ConfigurationSource: Model
Source Name: SDD_lookup
Table 5.1. SDD_lookup Configuration Set
Property Value
Description
Components [SDD_lookup Configuration Set.Components(1) [-
31], SDD_lookup Configuration Set.Compon-
ents(2) [32], SDD_lookup Configuration Set.-
Components(3) [33], SDD_lookup Configurat-
ion Set.Components(4) [34], SDD_lookup Co-
nfiguration Set.Components(5) [37], SDD_lo-
okup Configuration Set.Components(6) [38],
SDD_lookup Configuration Set.Components(7) [-38], SDD_lookup Configuration Set.Compone-
nts(8) [39], SDD_lookup Configuration Set.C-
omponents(9) [41]]
Name Configuration
SimulationMode normal
Table 5.2. SDD_lookup Configuration Set.Components [31](1)
Property Value
Name Solver
Description
Components
StartTime 0.0
StopTime 10
AbsTol auto
FixedStep auto
InitialStep auto
MaxNumMinSteps -1
MaxOrder 5
ZcThreshold auto
ConsecutiveZCsStepRelTol 10*128*eps
MaxConsecutiveZCs 1000
ExtrapolationOrder 4
NumberNewtonIterations 1
MaxStep auto
MinStep auto
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
38/51
System Model Configuration
32
MaxConsecutiveMinStep 1
RelTol 1e-3
SolverMode Auto
EnableConcurrentExecution off
ConcurrentTasks off
Solver ode45
SolverName ode45
SolverType Variable-step
SolverJacobianMethodControl auto
ShapePreserveControl DisableAll
ZeroCrossControl UseLocalSettings
ZeroCrossAlgorithm Nonadaptive
SolverResetMethod Fast
PositivePriorityOrder off
AutoInsertRateTranBlk off
SampleTimeConstraint Unconstrained
InsertRTBMode Whenever possible
SampleTimeProperty
Table 5.3. SDD_lookup Configuration Set.Components [31](2)
Property Value
Name Data Import/Export
Description
Components
Decimation 1
ExternalInput [t, u]
FinalStateName xFinal
InitialState xInitial
LimitDataPoints on
MaxDataPoints 1000
LoadExternalInput off
LoadInitialState off
SaveFinalState off
SaveCompleteFinalSimState off
SaveFormat Array
SignalLoggingSaveFormat ModelDataLogs
SaveOutput on
SaveState off
SignalLogging on
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
39/51
System Model Configuration
33
DSMLogging on
InspectSignalLogs off
VisualizeSimOutput on
StreamToWorkspace off
StreamVariableName streamout
SaveTime on
ReturnWorkspaceOutputs off
StateSaveName xout
TimeSaveName tout
OutputSaveName yout
SignalLoggingName logsout
DSMLoggingName dsmout
OutputOption RefineOutputTimes
OutputTimes []
ReturnWorkspaceOutputsName out
Refine 1
LoggingIntervals [-inf, inf]
Table 5.4. SDD_lookup Configuration Set.Components [31](3)
Property Value
Name Optimization
Description
Components
BlockReduction off
BooleanDataType on
ConditionallyExecuteInputs on
DefaultParameterBehavior Tunable
InlineParams off
UseDivisionForNetSlopeComputation off
UseFloatMulNetSlope off
DefaultUnderspecifiedDataType double
UseSpecifiedMinMax off
InlineInvariantSignals off
OptimizeBlockIOStorage on
BufferReuse on
GlobalBufferReuse on
GlobalVariableUsage None
StrengthReduction off
AdvancedOptControl
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
40/51
System Model Configuration
34
EnforceIntegerDowncast on
ExpressionFolding on
BooleansAsBitfields off
BitfieldContainerType uint_T
EnableMemcpy on
MemcpyThreshold 64
PassReuseOutputArgsAs Structure reference
PassReuseOutputArgsThreshold 12
FoldNonRolledExpr on
LocalBlockOutputs on
RollThreshold 5
StateBitsets off
DataBitsets off
ActiveStateOutputEnumStorageType Native Integer
UseTempVars off
ZeroExternalMemoryAtStartup on
ZeroInternalMemoryAtStartup on
InitFltsAndDblsToZero on
NoFixptDivByZeroProtection off
EfficientFloat2IntCast off
EfficientMapNaN2IntZero on
OptimizeModelRefInitCode off
LifeSpan inf
EvaledLifeSpan Inf
MaxStackSize Inherit from target
BufferReusableBoundary on
SimCompilerOptimization off
AccelVerboseBuild off
Table 5.5. SDD_lookup Configuration Set.Components [31](4)
Property Value
Name Diagnostics
Description
Components
RTPrefix error
ConsistencyChecking none
ArrayBoundsChecking none
SignalInfNanChecking none
SignalRangeChecking none
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
41/51
System Model Configuration
35
ReadBeforeWriteMsg UseLocalSettings
WriteAfterWriteMsg UseLocalSettings
WriteAfterReadMsg UseLocalSettings
AlgebraicLoopMsg warning
ArtificialAlgebraicLoopMsg warning
SaveWithDisabledLinksMsg warning
SaveWithParameterizedLinksMsg none
CheckSSInitialOutputMsg on
UnderspecifiedInitializationDetection Classic
MergeDetectMultiDrivingBlocksExec none
CheckExecutionContextPreStartOutputMsg off
CheckExecutionContextRuntimeOutputMsg off
SignalResolutionControl TryResolveAllWithWarning
BlockPriorityViolationMsg warning
MinStepSizeMsg warning
TimeAdjustmentMsg none
MaxConsecutiveZCsMsg error
MaskedZcDiagnostic warning
IgnoredZcDiagnostic warning
SolverPrmCheckMsg none
InheritedTsInSrcMsg warning
MultiTaskDSMMsg warning
MultiTaskCondExecSysMsg none
MultiTaskRateTransMsg error
SingleTaskRateTransMsg none
TasksWithSamePriorityMsg warning
SigSpecEnsureSampleTimeMsg warning
CheckMatrixSingularityMsg none
IntegerOverflowMsg warning
Int32ToFloatConvMsg warning
ParameterDowncastMsg error
ParameterOverflowMsg error
ParameterUnderflowMsg noneParameterPrecisionLossMsg warning
ParameterTunabilityLossMsg warning
FixptConstUnderflowMsg none
FixptConstOverflowMsg none
FixptConstPrecisionLossMsg none
UnderSpecifiedDataTypeMsg none
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
42/51
System Model Configuration
36
UnnecessaryDatatypeConvMsg none
VectorMatrixConversionMsg none
InvalidFcnCallConnMsg error
FcnCallInpInsideContextMsg UseLocalSettings
SignalLabelMismatchMsg none
UnconnectedInputMsg warning
UnconnectedOutputMsg warning
UnconnectedLineMsg warning
SFcnCompatibilityMsg none
FrameProcessingCompatibilityMsg error
UniqueDataStoreMsg none
BusObjectLabelMismatch warning
RootOutportRequireBusObject warning
AssertControl UseLocalSettings
Echo
EnableOverflowDetection off
AllowSymbolicDim off
ModelReferenceIOMsg none
ModelReferenceVersionMismatchMessage none
ModelReferenceIOMismatchMessage none
ModelReferenceCSMismatchMessage none
ModelReferenceSimTargetVerbose off
UnknownTsInhSupMsg warning
ModelReferenceDataLoggingMessage warning
ModelReferenceSymbolNameMessage warning
ModelReferenceExtraNoncontSigs error
StateNameClashWarn warning
SimStateInterfaceChecksumMismatchMsg warning
SimStateOlderReleaseMsg error
InitInArrayFormatMsg warning
StrictBusMsg ErrorLevel1
BusNameAdapt WarnAndRepair
NonBusSignalsTreatedAsBus noneSFUnusedDataAndEventsDiag warning
SFUnexpectedBacktrackingDiag warning
SFInvalidInputDataAccessInChartInitDiag warning
SFNoUnconditionalDefaultTransitionDiag warning
SFTransitionOutsideNaturalParentDiag warning
SFUnconditionalTransitionShadowingDiag warning
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
43/51
System Model Configuration
37
SFUndirectedBroadcastEventsDiag warning
SFTransitionActionBeforeConditionDiag warning
SFOutputUsedAsStateInMooreChartDiag error
IntegerSaturationMsg warning
Table 5.6. SDD_lookup Configuration Set.Components [31](5)
Property Value
Name Hardware Implementation
Description
Components
ProdBitPerChar 8
ProdBitPerShort 16
ProdBitPerInt 32
ProdBitPerLong 32
ProdBitPerLongLong 64
ProdBitPerFloat 32
ProdBitPerDouble 64
ProdBitPerPointer 32
ProdLargestAtomicInteger Char
ProdLargestAtomicFloat None
ProdIntDivRoundTo Undefined
ProdEndianess Unspecified
ProdWordSize 32
ProdShiftRightIntArith on
ProdLongLongMode off
ProdHWDeviceType 32-bit Generic
TargetBitPerChar 8
TargetBitPerShort 16
TargetBitPerInt 32
TargetBitPerLong 32
TargetBitPerLongLong 64
TargetBitPerFloat 32
TargetBitPerDouble 64
TargetBitPerPointer 32
TargetLargestAtomicInteger Char
TargetLargestAtomicFloat None
TargetShiftRightIntArith on
TargetLongLongMode off
TargetIntDivRoundTo Undefined
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
44/51
System Model Configuration
38
TargetEndianess Unspecified
TargetWordSize 32
TargetTypeEmulationWarnSuppressLevel 0
TargetPreprocMaxBitsSint 32
TargetPreprocMaxBitsUint 32
TargetHWDeviceType Specified
TargetUnknown off
ProdEqTarget on
Table 5.7. SDD_lookup Configuration Set.Components [31](6)
Property Value
Name Model Referencing
Description
Components
UpdateModelReferenceTargets IfOutOfDateOrStructuralChange
SkipRefExpFcnMdlSchedulingOrderCheck off
EnableRefExpFcnMdlSchedulingChecks on
CheckModelReferenceTargetMessage error
EnableParallelModelReferenceBuilds off
ParallelModelReferenceErrorOnInvalidPool on
ParallelModelReferenceMATLABWorkerInit None
ModelReferenceNumInstancesAllowed Multi
PropagateVarSize Infer from blocks in model
ModelDependencies
ModelReferencePassRootInputsByReference on
ModelReferenceMinAlgLoopOccurrences off
PropagateSignalLabelsOutOfModel off
SupportModelReferenceSimTargetCustomCode off
Table 5.8. SDD_lookup Configuration Set.Components [31](7)
Property Value
Name Simulation Target
Description
Components
SimCustomSourceCode
SimCustomHeaderCode
SimCustomInitializer
SimCustomTerminator
SimReservedNameArray
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
45/51
System Model Configuration
39
SimUserSources
SimUserIncludeDirs
SimUserLibraries
SFSimEnableDebug off
SFSimOverflowDetection on
SFSimEcho on
SimBlas on
SimCtrlC on
SimExtrinsic on
SimIntegrity on
SimUseLocalCustomCode off
SimParseCustomCode on
SimBuildMode sf_incremental_build
SimDataInitializer
SimGenImportedTypeDefs off
Table 5.9. SDD_lookup Configuration Set.Components [31](8)
Property Value
Name Code Generation
SystemTargetFile grt.tlc
TLCOptions
CodeGenDirectory
GenCodeOnly off
MakeCommand make_rtw
GenerateMakefile on
PackageGeneratedCodeAndArtifacts off
PackageName
TemplateMakefile grt_default_tmf
PostCodeGenCommand
Description
GenerateReport off
SaveLog off
RTWVerbose on
RetainRTWFile off
ProfileTLC off
TLCDebug off
TLCCoverage off
TLCAssert off
ProcessScriptMode Default
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
46/51
System Model Configuration
40
ConfigurationMode Optimized
ProcessScript
ConfigurationScript
ConfigAtBuild off
RTWUseLocalCustomCode off
RTWUseSimCustomCode off
CustomSourceCode
CustomHeaderCode
CustomInclude
CustomSource
CustomLibrary
CustomInitializer
CustomTerminator
Toolchain Automatically locate an installed toolchain
BuildConfiguration Faster Builds
CustomToolchainOptions
IncludeHyperlinkInReport off
LaunchReport off
PortableWordSizes off
GenerateErtSFunction off
CreateSILPILBlock None
CodeExecutionProfiling off
CodeExecutionProfileVariable executionProfile
CodeProfilingSaveOptions SummaryOnly
CodeProfilingInstrumentation off
SILDebugging off
TargetLang C
IncludeERTFirstTime on
GenerateTraceInfo off
GenerateTraceReport off
GenerateTraceReportSl off
GenerateTraceReportSf off
GenerateTraceReportEml offGenerateCodeInfo off
GenerateWebview off
GenerateCodeMetricsReport off
GenerateCodeReplacementReport off
RTWCompilerOptimization off
ObjectivePriorities
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
47/51
System Model Configuration
41
RTWCustomCompilerOptimizations
CheckMdlBeforeBuild Off
CustomRebuildMode OnUpdate
DataInitializer
Components [SDD_lookup Configuration Set.Components(8).C-
omponents(1) [41], SDD_lookup Configurati-
on Set.Components(8).Components(2) [43]]
Table 5.10. SDD_lookup Configuration Set.Components [31](9)
Property Value
Description Simulink Coverage Configuration Component
Components
Name Simulink Coverage
RecordCoverage onCovPath /
CovSaveName covdata
CovCompData
CovMetricSettings rw
CovFilter
CovHTMLOptions
CovNameIncrementing off
CovHtmlReporting on
CovForceBlockReductionOff on
CovEnableCumulative on
CovSaveCumulativeToWorkspaceVar on
CovSaveSingleToWorkspaceVar on
CovCumulativeVarName covCumulativeData
CovCumulativeReport off
CovReportOnPause on
CovModelRefEnable Off
CovModelRefExcluded
CovExternalEMLEnable off
CovSFcnEnable on
CovBoundaryAbsTol 1.0000e-05
CovBoundaryRelTol 0.0100
CovUseTimeInterval off
CovStartTime 0
CovStopTime 0
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
48/51
System Model Configuration
42
Table 5.11. SDD_lookup Configuration
Set.Components(8).Components [41](1)
Property Value
Name Code Appearance
DescriptionComponents
ForceParamTrailComments off
GenerateComments on
CommentStyle Auto
IgnoreCustomStorageClasses on
IgnoreTestpoints off
IncHierarchyInIds off
MaxIdLength 31
PreserveName off
PreserveNameWithParent off
ShowEliminatedStatement off
OperatorAnnotations off
IncAutoGenComments off
SimulinkDataObjDesc off
SFDataObjDesc off
MATLABFcnDesc off
IncDataTypeInIds off
PrefixModelToSubsysFcnNames on
MangleLength 1
CustomSymbolStr $R$N$M
CustomSymbolStrGlobalVar $R$N$M
CustomSymbolStrType $N$R$M_T
CustomSymbolStrField $N$M
CustomSymbolStrFcn $R$N$M$F
CustomSymbolStrFcnArg rt$I$N$M
CustomSymbolStrBlkIO rtb_$N$M
CustomSymbolStrTmpVar $N$M
CustomSymbolStrMacro $R$N$M
CustomSymbolStrUtil $N$C
CustomCommentsFcn
DefineNamingRule None
DefineNamingFcn
ParamNamingRule None
ParamNamingFcn
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
49/51
System Model Configuration
43
SignalNamingRule None
SignalNamingFcn
InsertBlockDesc off
InsertPolySpaceComments off
SimulinkBlockComments on
MATLABSourceComments off
EnableCustomComments off
InternalIdentifier Shortened
InlinedPrmAccess Literals
ReqsInCode off
UseSimReservedNames off
ReservedNameArray
Table 5.12. SDD_lookup Configuration
Set.Components(8).Components [41](2)
Property Value
Name Target
Description
Components
IsERTTarget off
TargetFcnLib ansi_tfl_tmw.mat
TargetLibSuffix
TargetPreCompLibLocation
GenFloatMathFcnCalls NOT IN USE
TargetLangStandard C89/C90 (ANSI)
TargetFunctionLibrary NOT IN USE
CodeReplacementLibrary None
UtilityFuncGeneration Auto
ERTMultiwordTypeDef System defined
ERTMultiwordLength 256
MultiwordLength 2048
GenerateFullHeader on
InferredTypesCompatibility off
GenerateSampleERTMain off
GenerateTestInterfaces off
ModelReferenceCompliant on
ParMdlRefBuildCompliant on
CompOptLevelCompliant on
ConcurrentExecutionCompliant on
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
50/51
System Model Configuration
44
IncludeMdlTerminateFcn on
CombineOutputUpdateFcns off
CombineSignalStateStructs off
SuppressErrorStatus off
ERTFirstTimeCompliant off
IncludeFileDelimiter Auto
ERTCustomFileBanners off
SupportAbsoluteTime on
LogVarNameModifier rt_
MatFileLogging on
MultiInstanceERTCode off
CodeInterfacePackaging Nonreusable function
SupportNonFinite on
SupportComplex on
PurelyIntegerCode off
SupportContinuousTime on
SupportNonInlinedSFcns on
SupportVariableSizeSignals off
ParenthesesLevel Nominal
CastingMode Nominal
GenerateClassInterface off
ModelStepFunctionPrototypeControlCompliant off
CPPClassGenCompliant on
GRTInterface on
GenerateAllocFcn off
UseToolchainInfoCompliant on
GenerateSharedConstants on
ExtMode off
ExtModeStaticAlloc off
ExtModeTesting off
ExtModeStaticAllocSize 1000000
ExtModeTransport 0
ExtModeMexFile ext_commExtModeMexArgs
ExtModeIntrfLevel Level1
RTWCAPISignals off
RTWCAPIParams off
RTWCAPIStates off
RTWCAPIRootIO off
8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Lookup
51/51
System Model Configuration
GenerateASAP2 off
MultiInstanceErrorCode Error