PURITY* FG MFAEROSOL LUBRICANT

IntroductionPetro-Canada’s PURITY* FG MF Aerosol is anadvanced food grade lubricant packaged in aspray can and formulated to deliver superior,longer lasting protection than leading specialtyfood grade lubricants.

PURITY* FG’s superiority results from morethan 25 years formulating experience. Usingthe patented HT purity process, Petro-Canadaproduces a 99.9% pure, crystal clear base oil– the purest in the world. Free of impuritiesthat can hinder performance and fortified withspecially selected performance additives,PURITY* FG MF Aerosol is highly resistant tooxidative breakdown and provides excellentprotection from wear and corrosion. Toughenough to handle wet food processingenvironments, its tacky nature allows it toadhere strongly to metal surfaces, resistingwater washout and water spray loss.

PURITY* FG MF Aerosol also meets thehighest food industry purity standards and fitsperfectly in HACCP (Hazard Analysis andCritical Control Point) and GMP (GoodManufacturing Practice) plans. All of its fluidcomponents comply with FDA regulation21 CFR 178.3570 “Lubricants with incidentalfood contact”. It is H1 registered by NSF andmeets the requirements of the U.S.Department of Agriculture (USDA) as anH1 lubricant for use in federally inspectedmeat and poultry plants where incidental foodcontact may occur. It is approved by theCanadian Food Inspection Agency for use inregistered food processing plants and certifiedkosher and pareve by Star K.

Features and Benefits• Outstanding resistance to oxidative

breakdown

• Keeps systems free of sludge and varnish

• Results in longer fluid life and reduceddowntime even at high temperaturesand in the presence of water and acidiccontamination

• Long-term protection from rust andcorrosion

• Protects chains and metal surfacesfrom rusting

• Excellent wear protection

• Prevents metal-to-metal contactbetween chains and drive sprockets

• Reduces maintenance costs

• Strongly adheres to all surfaces

• Resists throw-off from chains,preventing fluid drips

• Highly resistant to water washoutand spray loss

• Reduces fluid consumption

• Environmentally safe

• Non-ozone depleting propellant (CFC free)

• Comes with an application tube for accuracywhen lubricating hard-to-reach locations

• Fully approved for use in and around foodprocessing areas

• H1 registered by NSF

• All fluids meet the requirements of theU.S. Department of Agriculture (USDA)as H1 lubricants for use in federallyinspected meat and poultry plantswhere incidental food contact may occur

• All fluid components comply with FDA21 CFR 178.3570 “Lubricants withincidental food contact”

GO TO GENERAL FOOD GRADE LUBRICANTS PAGE | SEE OTHER PETRO-CANADA PRODUCTS

ACCULUBE HOME | EMAIL ACCULUBE OR CALL 937.461.9906