Post on 25-Aug-2020
PROVEN
PUMPING SOLUTIONS
A Warren Rupp, Inc. Brand
www.blagdonpump.com
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS2
ABOUT BLAGDON
Our BackgroundBlagdon Pump was founded in the early 1950’s in the North East of England as a specialist pump manufacturer. In 1979 production of AIR OPERATED DOUBLE DIAPHRAGM PUMPS commenced and we soon became a market leader. In 1997 the US based multinational IDEX Corporation acquired Blagdon Pump to strengthen their global position in the double diaphragm market. Blagdon Pump transferred operations to Ireland in 2009. Blagdon Pump is dynamic and evolving. Our aim is to make dealing with us an easy and effi cient experience – a service you can rely on for all your pump requirements.
Our MissionBlagdon AODD pumps provide high performance, reliable solutions for your pumping needs. We specialise in extreme condition environments and applications, keeping your process moving both above and below ground.
Our WebsiteWe are committed to offering you a dedicated sales and after sales service which is second to none. Now you can keep up to date with developments as they happen with our website, www.blagdonpump.com. We look forward to working with you.
Blagdon Certifi cations
AIRVANTAGE - Energy Saving TechnologyAirVantage is a new technology for Air Operated Double Diaphragm pumps that signifi cantly reduces air consumption over conventional AODD pumps.
ATEX CE FDAGOST-R EHEDG
Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow.
AODD pumps fully expand diaphragms
to complete pump stroke, causing
increased air usage and expense.
Conventional
vs. tfet
Visit the Blagdon AirVantage website at www.airvantagepump.com/blagdon to learn more about this award winning technology.
Benefi ts of AirVantage• Reduces air consumption • Adapts to process conditions • Powered only by compressed air
• Saves energy while maintaining fl ow • Increases productivity • Reduces compressor maintenance
AAr
NEW
WWW.BLAGDONPUMP.COM 3
PRODUCTS
Individual specifi cation sheets available for download at www.blagdonpump.com
Air operated double diaphragm pumps have long been recognised as the “work horse” of the industry for handling diffi cult liquids at relatively low pressures and fl ows. The range of applications is virtually limitless. Blagdon AODD pumps come in many sizes and choices of materials of construction. Almost every type of liquid from highly corrosive acids through high viscosity paints and adhesives, to food and drink products can be pumped.
Blagdon 1/2”, 1” and 2” EHEDG approved hygienic pumps in polished 316L stainless steel
ddd d
Blagdon 1/2”, 1”, 1 1/2” and 2” FDA compliant pumps in polished steel plus assorted standard fl uid fi ttings
Blagdon 1” and 2” high pressure 2:1 pumps available in aluminum, stainless steel
Blagdon metallic pumps available in aluminum, cast iron, stainless steel from 1/4” to 3”
Blagdon non-metallic pumps available in conductive polypropylene, and kynar(PVDF) from 1/4” to 2”
900
24030 60 90 120 150 180 210
800700600500400300200100VARIABLE FLOWS - LPM
VARIABLE FLOWS - GPM
VAR
IAB
LE H
EAD
S - P
SI (B
ar)
1/4”
1/2”
1”
2”
3”
1 1/2”
100 PSI (7 Bar)
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS4
BLAGDON BENEFITS
Blagdon offers an extensive pump range for handling fl uid media safely and cost effectively. We offer low cost ownership, by combining high quality wear parts with low price spares and a vast array of accessories. A fl exible modular design of pumps means we can offer short lead times and high degree of customising opportunities. Our experienced staff can provide instant support for installation, servicing, maintentance or a technical enquiry. We offer a fast spares delivery service, with many items in stock for immediate delivery.
The Pump Chambers are alternatively fi lled and emptied by drawing fl uid in through a common (suction) inlet (C), and out through a common (discharge) outlet (D). The diaphragms in each chamber are linked by a common shaft, so that they move backwards and forwards in unison. Compressed air is directed by the air valve alternatively, behind each diaphragm, to power discharge strokes. Pump speed, fl uid output and pressure (or head) is controlled by increasing or decreasing the fl ow of compressed air to the pump.
Operation Sequence
How the air-operated, double diaphragm pump operates
Key features and benefi ts of a Blagdon Pump•• Can run dry without damage or heat build up •• Fully submersible•• Designed to operate at low noise levels•• Leak-free air valves, easily removed for servicing•• Easily maintained – Stripped down quickly without any specialist tools•• Self priming to over 6 metres (19.7 Feet)•• Can safely “dead head” against closed discharge •• Low degradation and minimum product agitation•• Low start up pressures•• Portable and compact – can be remotely controlled •• Safe in hazardous areas – No sparking – Air-driven
Discharge Cycle:In chamber (A), air has been applied to the rear of the diaphragm to force out the fl uid in the chamber through the ball valve (3) to the discharge manifold (D). The discharge stroke ‘closes’ the ball valve (1) to prevent further liquid entering the chamber. This cycle is repeated to provide a continuous fl ow to the discharge manifold at outlet (D).
Suction Cycle:Fluid is drawn into the suction manifold at (C), by the suction stroke of the diaphragm and into chamber (B). This ‘opens’ the ball valve (2) to allow liquid to enter the chamber. Ball valve (4) is drawn into the valve seat and ‘closed’ by the diaphragm suction stroke.
of ut
)
w d
ve er
ve
e.
WWW.BLAGDONPUMP.COM 5
INSTALLATION SOLUTIONS
Pump DutiesBlagdon pumps can be installed in any of the models illustrated to perform the following duties: Liquid Transfer, Slurry Handling, Filter Feeding, Circulation, De-watering, Low Pressure, Spray Supply, Tank/Sump/Barrel/Drum Filling and Emptying, Batching/Mixing/Metering/Dosing, and Chemical Injection, etc.
A full list of chemicals and recommended elastomers isavailable on request, or our sales offi ce can advise on the best pumps and materials for specifi c media.
Typical range of products you can pump.
• ABRASIVES: Clay slip, titanium dioxide, mill scale
• ACIDS: All mineral and organic acids
• ADHESIVE: Solvent and water based
• ALCOHOLS: Chemicals
• CAUSTICS: Acids
• CEMENT: Slip, glazes, clay
• COSMETICS: Creams, emulsions, detergents
• DRILLING: Mud, grout, lubricants
• DRINKS: Soft drinks, spirits, beer, wine, milk
• EXPLOSIVES: Suspensions of gun powder, explosives, etc.
• FOODS: Liquid and semi-solid foods, fl avourings
• INKS & DYES: Printing inks, dryers, dyes, sizes and solvents
• OILS: Petrol, diesel, hydraulic, and cutting oils, lude oils, animal and vegetable oils and greases
• PAINT: Emulsions, latexes, pigments, solvents, resins, thinners
• PHARMACEUTICALS: Liquids, creams, and compounds
• PLATING: Aggressive acids, salts, sludge and effl uents
• PULPS: paper, wood, sizes, bleaches
• RESINS: Natural and synthetics, water and solvent based, monomeric and polymeric plastics
• RUBBER: Gum, latex
• SLUDGE & WASTE: Sewage, effl uents, coal and lime slurry
• SOLVENTS: Aromatic and aliphatics, ketones, aldehydes, esters and chlori-nated hydrocarbons, de-icing fl uids
• TIMBER PRESERVATIVES: Creosote, turpentine, copper napthenate
• WATER: All types
Self Priming
Submerged Operation
Permanent or Portable Options
Filling / Injection / Dosing
Flooded Suction
Safe for Hazardous Areas
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS6
PORTFOLIO INFORMATION
BlagdonPortfolio Information
DiaphragmPump Model/Size/Material
B06 - 1/4" Stainless Steel
B25 - 1” Aluminium
B40 - 1 1/2” Stainless Steel
X75 - 3” Cast Iron
B15 - 1/2” Polypropylene
B50 - 2” PVDFB75 - 3” PolypropyleneB75 - 3” PVDF
B25 - 1” Full Flow 2:1
B50 - 2” Stainless Steel
B15 - 1/2” Aluminium
Non-Metallic Pumps(Ball Valve)
Metallic Pumps(Ball Valve)
Metallic Pumps(Flap Valve)
HygienicPumps
HighPressurePumps
FDAPumps
PTFEPumps
B40 - 1 1/2” Aluminium
B50 - 2” Stainless Steel
B06 - 1/4" PVDF
B25 - 1” PVDF
B50 - 2” Hygienic
B25 - 1” Stainless Steel
B25 - 1” Conductive PTFE
B25 - 1” Cast Iron
B50 - 2” Aluminium
X75 - 3” Stainless Steel
B15 - 1/2” PVDF
B15 - 1/2” Hygienic
B50 - 2” Full Flow 2:1
B15 - 1/2” Conductive PTFE
B15 - 1/2” Stainless Steel
B40 - 1 1/2” Cast Iron
X75 - 3” Aluminium
B10 - 3/8” Polypropylene
B50 - 2” Polypropylene
B25 - 1” Standard 2:1
B40 - 1 1/2” Stainless Steel
B25 - 1” Stainless Steel
B50 - 2” Cast Iron
B06 - 1/4" Polypropylene
B25 - 1” Polypropylene
X25 - 1” Cast Iron
X75 - 3” AluminumX75 - 3” Cast IronX75 - 3” Stainless SteelAVB75 / AVX75 - Aluminum Air VantageAVB75 / AVX75 - Cast Iron Air VantageAVB75 / AVX75 - Stainless Steel Air Vantage
X50 - 2” Cast Iron
X25 - 1” Stainless Steel
X25 - 1” Aluminum
X50 - 2” Stainless Steel
X50 - 2” Aluminum
B25 - 1” Hygienic
B15 - 1/2” Stainless Steel
B15 - 1/2” Virgin PTFE
B25 - 1” Virgin PTFE
Fluid Contact Materials Air Chamber Materials
Sta
inle
ss S
teel
Pol
ishe
d S
tain
less
Alu
min
ium
Cas
t Iro
n
Nic
kel P
late
d A
lum
iniu
m
Pol
ypro
pyle
ne
Sta
inle
ss S
teel
Epo
xy C
oate
d A
lum
iniu
m
Epo
xy C
oate
d S
tain
less
Ste
el
C PTF
E C
oate
d A
lum
inum
ondu
ctiv
e P
TFE
Bun
a-N
EP
DM
(Inc
. Foo
d G
rade
)
Geo
last
Pol
yest
er (H
ytel
)
Neo
pren
e
Con
duct
ive
PTF
E
Virg
in P
TFE
Alu
min
ium
Cas
t Iro
n
PV
DF
Pol
ypro
pyle
ne
Con
duct
ive
Pol
ypro
pyle
ne
WWW.BLAGDONPUMP.COM 7
Materials Check Valve Materials Max. Flow Max. Op PressureAir Inlet Max. SolidSize (mm)Fluid Connections
34341111
1207640148028201143117
12012034341111644
20220220212012012076767640404014144
1361364848
53032018060
35012586
50013675
5305301521524848261616
889889889530530530320320320180180180606018
2”1 1/2”
1”1/2”2”1”1”
3/8”
1”1”1”2”2”2”
1/4”1/4”3”3”3”2”2”2”
1 1/2”1 1/2”1 1/2”
1”1”1”
1/2”1/2”1/4”
2” 150 RF2” 150 RF1” 150 RF1” 150 RF
1/2” 150 RF1/2” 150 RF
2”1”1”
3/8”3/8”1/4”1/4”3/4”3/8”3/8”1/4”3/4”3/8”1/4”3/4”3/8”1/4”
3/4”3/4”3/8”3/8”1/4”1/4”1/4”1/4”1/4”3/4”3/4”3/4”3/4”3/4”3/4”3/8”3/8”3/8”3/8”3/8”3/8”1/4”1/4”1/4”
7777
8.68.68.68.61616168.68.68.6
8.68.68888755
8.68.68.68.68.68.68.68.68.68.68.68.68.68.68.6
100100100100125125125125232232232125125125
125125
1007272125125125125
116116116116
125125125125125125125125125125125
332266326331032
66
238238
901901
3” 150 RF
3” 150 RF3” 150 RF3” 150 RF
3” 150 RF1”1”
6.96.9
100100
18
238 901 3” 1 0 RF 1” 6.9 100 18238 901 3” 1 0 RF 1” 6.9 100 18238 901 3” 1 0 RF 1” 6.9 100 18
18
33222
260140140140707070
988530530530265265265
3/4”3/4”3/4”3/4”1/2”1/2”1/2”
8.68.68.68.68.68.68.6
125125
125125125125125
8050
260260
988988
3/4”3/4”
6.96.9
125125
8080
5050252525
11101010666666333221
PTF
E (O
ne P
iece
)
Pol
yure
than
e
San
tropr
ene
PTF
EVi
ton
Bun
a-N
EP
DM
(Inc
. Foo
d G
rade
)
Neo
pren
e
San
topr
ene
Sta
inle
ss S
teel
PTF
E
Vito
n
UK
GP
M
L/M
in
BS
P(F
)
AN
SI F
lang
e
RJT
(M)
BS
P (N
PT)
F
Bar
PS
I
1/2” 150 RF1/2” 150 RF1” 150 RF1” 150 RF
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS8
TECHNICAL
Aggressive chemicals and most solvents. High temperature uses
N/A
Caustic solutions and dilute acids. Excellent abrasion resistance
Aggressive chemicals and solvents but with low abrasion resistance
Excellent abrasion resistance, dirty water, oils and hydrocarbons
High mechanical strength. Suitable with most oils, solvents and hydrocarbons
Excellent abrasion resistance. Widely used in the ceramics industry on dirty wate, clays, grout etc.
General purpose for use on water, most hydrocarbons and mild chemicals
Caustic solutions and dilute acids. Poor on oils and solvents
General purpose for use on water, most hydrocarbons and mild chemicals
Main Properties and Uses Min Optimum
Operating Temperatures
-18F-28C-11F-24C
50 to 140F10 to 60C50 to 140F10 to 60C50 to 140F10 to 60C50 to 130F10 to 54C50 to 130F10 to 54C50 to 130F10 to 54C50 to 212F10 to 100C50 to 140F10 to 60C
-10F-23C-4F
-20C-40F-40C-40F-40C32F0C
-10F-23CN/A N/A
0F-18C
ElastomerBuna-N
EPDM
Geolast
Neoprene
Polyester
Polyurethane
PTFE
Santoprene
Stainless Steel
Viton 75 to 212F24 to 100C
Ball Valve S.G.
Max WeightedStandard
7.80 N/AN/A
1.80 3.2
0.98 N/A
N/A N/A
N/A N/A
N/A N/A
1.23 2.64
1.0 N/A
1.23 2.64
1.23 2.64
356F180C
212F100C
356F180C
158F70C
158F70C
212F100C
212F100C
212F100C
176F80C
Viscosity Guide This table is a guide only – cps = centipoise
SAE
70 O
il17
640
cps
Wat
er1
cps
Tom
ato
Juice
176 c
ps
SAE
30 O
il35
2 cp
s
Gly
cerin
e88
0 cp
s
SAE
50 O
il15
61 c
ps
Glu
e30
00 c
ps
May
onna
ise
5000
cps
Mol
asse
s B
8640
cps
Sour
Cre
am15
200
cps
B50 - 2” Pumps Maximum 12000
X75 - 3” Pumps Maximum 25000
B06 - 1/4” Pumps
B10 - 3/8” Pumps
Maximum 2000
1 200 500 1000 2000 4000 10000 15000
Maximum 2000
B40 - 1 1/2” Pumps Maximum 12000
B15 - 1/2” Pumps Maximum 5000
B25 - 1” Pumps Maximum 5000
The air exhaust should be piped to an area for safe disposition of the product being pumped, in the event of a diaphragm failure.
CAUTION
Available fromDistributor
Available fromWarren Rupp, Inc.
Recommended Installation Guidelines
Viscosity GuidePump Identifi cation
Diaphragm & Ball Valve Options - Uses, Temperature Limits & Specifi c Gravity
For best results, the factory recommends installing the surge suppressor on the discharge side of the pump. Though the more common top-ported pump is shown here, this recommendation also applies to bottom, side and dual-ported diaphragm pumps.
The compressed air supply line to the surge suppressor should connect before a fi lter/regulator unit limited to inlet air of 125 PSI. To reduce piping and pump connection stresses, we recommend fl exible connections on bothinlet and outlet piping and air inlet connections.
Ball Valve
Flap Valve
Top Discharge
Bottom Discharge
WWW.BLAGDONPUMP.COM 9
B06B06MOULDED NON-METALLIC
• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 5 bar (73 PSI)• • Flow rates up to 16 litres/minute (4.3 gal/min)• • Bolted construction for safety• • Low break out pressure requirement• • Reliable pneumatic air valve system
Technical Data
NON-METALLIC SERIES B06POLYPROPYLENE & PVDFMaximum Delivery: 16 ltrs/min (4.3 gal/min)Max. Working Pressure: 5 bar (73 PSI)Max. Solid Particle Size: 1 mm. (0.04”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 1.5 m. (4.9’)Suction Lift (Wet): 4.1 m. (13.5’)Fluid Inlet/Outlet: 1/4” BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Polypropylene 1.7 kg. (3.8 lbs.)PVDF 1.9 kg. (4.2 lbs.)
Shipping Dimensions: 240 x 180 x 200 mm. (9.5” x 7.1” x 7.9”)
1269684
154
80.5
138
63
SILENCER
120 (WITH SILENCER FITTED)
17194
107
59 188
BLAGDON LABEL INCLUDING PUMP MODEL & SERIAL NO. FASTENEDTO MANIFOLD
4 MOUNTING HOLES Ø 6.0 IN
POSITION SHOWN
23
TYPICAL CODE = B06. 04. PP. BB. TTP
Example above: B06.04.PP.BB.TTP refers to B06 model, Design Level 4 with Polypropylene wetted components, Glass fi lled Polypropylene non-wetted components, with PTFE Diaphragms and Valve Balls and Polypropylene Seats.
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
Performance Curve
ps(14.
)5 i
0 Bar1.
( 9i
2 p )s
02ar
. B
(4 .3 5 psi)
4.0 Bar5)
8 p i(
s
A0
arP
S
5. BIR
RES URE
( 2.5)
7psi
10
0 2
0.4
4
0.8
6
1.3
8
1.7
10
2.2
12
2.6
14
3.0
20
20
0
30
40
40
60
80
50
ME
TRE
SH
EA
D
(2 CFM)33.5 M /hr
32 M /hr AIR CONSUMPTION(1.2 CFM)
(3.5 CFM)
36 M /hr
(5.8 CFM)
310 M /hr
(7.6 CFM)
313 M /hr
16
3.5
18
3.9 UK GPM
L/MIN
PS
IHE
AD
FEE
TH
EA
D
FLUID FLOW RATEAA
33
66
98
131
164
3.0 arrB
MODEL - B06
DESIGN LEVEL
WETTED COMPONENTSP: POLYPROPYLENEK: KYNAR (PVDF)
VALVE SEATSP: POLYPROPYLENEK: KYNAR (PVDF)
VALVE BALLST: PTFEV: VITON®
S: 316 STAINLESS STEEL
DIAPHRAGMSE: EPDMH: POLYESTERR: SANTOPRENE®
T: PTFEV: VITON®
O: ONE PIECE PTFE
NON-WETTED COMPONENTSP: POLYPROPYLENE (Glass Filled)
VALVE TYPEB: BALL
SUCTION ORIENTATIONB: BOTTOM
Dimensions
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS10
B06B06 METALLIC SERIES
• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • High quality investment cast design• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 18 litres/minute (4.8 gal/min)• • Bolted construction for safety• • Reliable pneumatic air valve system• • Constructed from 316L Stainless Steel
Technical Data
METALLIC SERIES B06STAINLESS STEELMaximum Delivery: 18 ltrs/min (4.8 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 1 mm. (0.04”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 1.5 m. (4.9’)Suction Lift (Wet): 4.1 m. (13.5’)Fluid Inlet/Outlet: 1/4” BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weight:Stainless Steel 3.7 kg. (8.2 lbs.)
Shipping Dimensions: 240 x 180 x 200 mm. (9.5” x 7.1” x 7.9”)
TYPICAL CODE = B06. 04. SS. BB. TTS
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
Performance Curve
MODEL - B06: Standard X06: ATEX Approved
DESIGN LEVEL
WETTED COMPONENTSS: 316L STAINLESS STEEL
VALVE SEATSS: 316L STAINLESS STEEL
VALVE BALLST: PTFEV: VITON®
S: 316 STAINLESS STEEL
DIAPHRAGMSE: EPDMH: POLYESTERR: SANTOPRENE®
T: PTFEV: VITON®
O: ONE PIECE PTFE
NON-WETTED COMPONENTSS: 316L STAINLESS STEEL
VALVE TYPEB: BALL
SUCTION ORIENTATIONB: BOTTOM
Dimensions
SILENCER
112
98
123 33
15.5
122 148.5
189 (MANIFOLDS IN–LINE)
94.5
171110
76.5 AIR INLET
4 MOUNTING HOLESØ 6.5
AIR INLET1/4” BSP(F)
FLUID INLET1/4” BSP(F)
FLUID INLET1/4” BSP(F)
(3.5 CFM)6 3M /hr
30
0
10
20
(( psi1144.55 )
1.0 Bar
2
00.44
4
00.7 11.00
( 9 i2 s )pBBa.0022
r
4(( si)3.5 p.0 BB rr
3 aa
6
11.44
88
11.8
ips )(87
40
50
60
70
90
(2 CFM)
33.5 M /hr
( )ps58 i
(1i
01)ps
Bara7.0
5 psi)
(12
2 AIR CONSUMPTION3M /hr(1.2 CFM)
L/MIN
4.0
114
2.5
10
2.2
12
2.9
16
3.3
18
3.7
(7.6 CFM)13 3M /hr
UK GPM
(5.8 CFM)10 3M /hr
PS
IHE
AD
00
40
20
60
80
100
120
33
0
66
99
131
197
164
230
262
FLUID FLOW ROW RATEAA
ME
TRE
SH
EA
D
FEE
TH
EA
D
i7 5 pp
( 2. ss )4. arrB0
5 0 BB. ar
6.a0 B rr
80
Bar6
rararI
PE
URREE
8.
A RR
SS
WWW.BLAGDONPUMP.COM 11
B15B15MOULDED NON-METALLIC SERIES
• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Strong, robust design• • Pressures to 8 bar (116 PSI)• • Flow rates up to 48 litres/minute (13 gal/min)• • Flanged or screwed end connections• • Pneumatic air valve, reliable and easy
Technical Data
MOULDED NON-METALLIC SERIES B15 POLYPROPYLENE & PVDF
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
Performance Curve
Maximum Delivery: 48 ltrs/min (13 gal/min)Max. Working Pressure: 8 bar (116 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1/2 ANSI #150 RF FlangedInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Polypropylene/Aluminum 5.3 kg. (11.7 lbs.)PVDF/Aluminum 7 kg. (15.4 lbs.)Polypropylene/Stainless Steel 12 kg. (26.5 lbs.)PVDF/Stainless Steel 13.5 kg. (29.8 lbs.)
Shipping Dimensions: 320 x 200 x 340 mm. (12.6” x 7.9” x 13.4”)
287 IN–LINE MANIFOLDS
208 304
51
133
260210
77
143.5
9
2085
170
20
84
MOUNTINGSLOTS
259
155 AIR INLET
AIR EXHAUST 1/4” BSP
SUCTION INLET 1/2” ANSI
150 FLANGE
DISCHARGEOUTLET
1/2” ANSI150 FLANGE
B8ar(11p i
6s )
B7ar(
ps )
101.5i6 B ra(87 s ) p i
5 Bar7p
( 2.5 si)4 Bar( 8 p5 si)3 Bar(43 si.5 p )2 Bar2( 9 psi)
1. Bar R R S5 AI P E SURE
21.7psi(
)
ME
TRE
SH
EA
D
30
0
10
20
2 4
FLUID FLOWRATEAA
6 8
60
40
50
70
80
(5.3 CFM)9 M /hr3
(6.5 CFM)11 M /hr3 21 M /hr3
(12.4 CFM) (17.6 CFM)30 M /hr3
FEE
TH
EA
D
99
12 - UK GPM10
0
33
66
197
131
164
230
266
PS
IHE
AD
42.6
28.4
14.2
0
113.6
99.4
71.0
56.8
85.2
10 20 30 40 50 L/MIN
TYPICAL CODE = B15. 01. PT. BB. TTP -LF
MODEL - B15: Standard X15: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSP: POLYPROPYLENEK: KYNAR (PVDF)G: CONDUCTIVE POLYPROPYLENE
VALVE SEATSB: BUNA-N K: KYNAR (PVDF)E:EPDM V: VITONN: NEOPRENEP: POLYPROPYLENE
VALVE BALLSB: BUNA-N K: KYNAR (PVDF)E: EPDM V: VITONN: NEOPRENES: 316 STAINLESS STEEL
DIAPHRAGMSB: BUNA-N P: POLYPROPYLENE E: EPDM R: SANTROPENEH:POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE
NON-WETTED COMPONENTST: EPOXY COATED ALUMINUMW: EPOXY COATED STAINLESS STEEL
VALVE TYPEB: BALL
SUCTION ORIENTATIONB: BOTTOM
Dimensions
*X Series ATEX pumps are ONLY applicable to Conductive Polypropylene pumps.
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS12
B15B15 METALLIC SERIES
• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 60 litres/minute (16 gal/min)• • Bolted construction for greater integrity• • Reliable pneumatic air valve design• • Portable
Technical Data
METALLIC SERIES B15ALUMINUM
Performance Curve
Maximum Delivery: 60 ltrs/min (16 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1/2 BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weight:Aluminum 5.9 kg. (13 lbs.)
Shipping Dimensions: 320 x 200 x 340 mm. (12.6” x 7.9” x 13.4”)
100 83
25
245.5
127.583 44
203.5
89
120233160
127.5
124.5AIR INLET
FLUID DISCHARGE1/2” BSP
AIR INLET1/4” BSP
AIR EXHAUST1/4” BSP
FLUID SUCTION1/2” BSP
Ø 7mmMOUNTING HOLES
FLUID FLOW RLOW ATEAA
ME
TRE
SH
EA
D
30
20
20
40
10
10
2 6
20
4
30
88
85
80
70
50
4060
80
100
120
60
FEE
TH
EA
D
- UKK GPM10 12 14
L/MIN
50
100
250
150
200
PS
IHE
AD
0
277
40 50 60 70 -
8.0 Bar AIR PRESSURE
(116 psi)7 0
r. Ba( 0 .
1 1 5 psi)6.0 Bar(87 psi)
0 B5. ar72.)
( 5 psi4 0 B. ar58
i)( ps
33.0 Bar43. p ))( 5 si
2.0 Bar29.)
( 0 psi11.55 BBar
7(21. psi)
310 M /hr(5.8 CFM)
335 M /hr(20.6 CFM)
320 M /hr(11.7 CFM)
315 M /hr AIR CONSUMPTION(8.8 CFM)
TYPICAL CODE = B15. 01. AA. BB. TTS -LF
MODEL - B15: Standard X15: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSA: ALUMINUM
VALVE SEATSA: ALUMINUMB: BUNA-NE:EPDM N: NEOPRENEV: VITONS: 316 STAINLESS STEEL
VALVE BALLSB: BUNA-N V: VITONE: EPDM T: PTFEN: NEOPRENES: 316 STAINLESS STEEL
DIAPHRAGMSB: BUNA-N P: POLYPROPYLENE E: EPDM R: SANTROPENEH:POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE
NON-WETTED COMPONENTSA: ALUMINUM
VALVE TYPEB: BALL
SUCTION ORIENTATIONB: BOTTOM
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
WWW.BLAGDONPUMP.COM 13
METALLIC SERIES B15B15
• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 60 litres/minute (16 gal/min)• • Bolted construction for greater integrity• • 316L Stainless Steel
Technical Data
METALLIC SERIES B15STAINLESS STEEL
Performance Curve
Maximum Delivery: 60 ltrs/min (16 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1/2 BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Stainless Steel/Aluminum 9.7 kg. (12.4 lbs.)Stainless Steel 15 kg. (33.1 lbs.)
Shipping Dimensions: 320 x 200 x 340 mm. (12.6” x 7.9” x 13.4”)
261
188
94
25
201
288 IN–LINE MANIFOLD OPTION
241
126 AIR INLET
AIR INLET1/4” BSP
156
75FLUID DISCHARGE1/2” BSP
AIR EXHAUST1/4” BSP
FLUIDSUCTION1/2” BSP
172
Ø 7MOUNTING
HOLES
FLUID FLOW RATEAA
ME
TRE
SH
EA
D
30
20
20
40
10
10
2 6
20
4
30
8
85
80
70
50
4060
80
100
120
60
FEE
TH
EA
D
- UK GPM10 12 14
L/MIN
50
100
250
150
200
PS
IHE
AD
0
277
40 50 60 70 -
8.0 Bar AIR PRESSURE
(116 psi)7 0
r. Ba( 0 .
1 1 5 psi)6.0 Bar(87 psi)
0 B5. ar72.)
( 5 psi4 0 B. ar58
i)( ps
3.0 Bar43. p )( 5 si
2.0 Bar29.)
( 0 psi1.5 Bar
7(21. psi)
310 M /hr(5.8 CFM)
335 M /hr(20.6 CFM)
320 M /hr(11.7 CFM)
315 M /hr AIR CONSUMPTION(8.8 CFM)
TYPICAL CODE = B15. 01. SA. BB. TTS -LF
MODEL - B15: Standard X15: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSS: 316 STAINLESS STEEL
VALVE SEATSS: 316 STAINLESS STEEL
VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENES: 316 STAINLESS STEEL
DIAPHRAGMSB: BUNA-N P: POLYPROPYLENE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE
NON-WETTED COMPONENTSA: ALUMINUMS: 316 STAINLESS STEEL
VALVE TYPEB: BALL
SUCTION ORIENTATIONB: BOTTOM
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS14
PTFE NON-METALLIC SERIESB15B15
• • Simple construction, easy to maintain• • Available in virgin and conductive PTFE• • Chemically inert• • Flanged end connections• • ATEX approved - intrinsically safe• • Reliable, proven pneumatic air valve• • Strong, robust design
Technical Data
NON-METALLIC SERIES B15CONDUCTIVE / VIRGIN PTFE
Performance Curve
Maximum Delivery: 48 ltrs/min (13 gal/min)Max. Working Pressure: 7 bar (102 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1/2 BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Conductive PTFE 16 kg. (35.3 lbs.)Virgin PTFE 16 kg. (35.3 lbs.)
Shipping Dimensions: 320 x 200 x 340 mm. (12.6” x 7.9” x 13.4”)
Ø 40 FASTENED THRO’ WITH M6
SOCKET CAP SCREWS
MOUNTING PADS 158
Ø93
31.5
311.5265
273.5
212
53
54108
150
160 BODY DIA.
AIR INLET1/4” BSP
88
159AIR
INLET
GROUNDING LEAD - ATTACHED TO OUTER COVER.(ATEX CERTIFIED MODELS ONLY)
169
285AIR EXHAUST1/4” BSP
90.5
B7ar(
ps )
101.5i6 B ra(87 s ) p i
5 Bar7p
( 2.5 si)4 Bar( 8 p5 si)3 Bar(43 sisi.5 pp ))2 Bar2( 9 pspsi)i)
1. Bar R R S5 AI P E SURE
21.7psi(
)
ME
TRE
SH
EA
D
30
00
10
20
22 44
FLUID FLOFLOWRATEAA
66 88
60
40
50
70
80
(5.3 CFM)9 M /hr3
(6.5 CFM)11 M /hr3 21 M /hr3
(12.4 CFM) (17.6 CFM)30 M /hr3
FEE
TH
EA
D
99
12 - UK GPM1010
0
33
66
197
131
164
230
266
PS
IHE
AD
42.6
28.4
14.2
0
113.6
99.4
71.0
56.8
85.2
10 20 30 400 50 L/MIN
TYPICAL CODE = B15. 00. TS. BB. TTT -LF
MODEL - B15: Standard X15: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTST: PTFE4: CONDUCTIVE PTFE
VALVE SEATST: PTFE
VALVE BALLST: PTFE
DIAPHRAGMST: PTFEX: PTFE/VITON (HIGH TEMP.)
NON-WETTED COMPONENTS4: CONDUCTICE PTFE5: POLYTHYLENE (HDPE)S: 316 STAINLESS STEEL
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
Dimensions
*X Series ATEX pumps are ONLY applicable to Conductive PTFE pumps.
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
WWW.BLAGDONPUMP.COM 15
HYGIENIC SERIES B15B15
Technical Data
HYGIENIC SERIES B15STAINLESS STEEL
Performance Curve
Maximum Delivery: 75 ltrs/min (20 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1” RJT (Standard)Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Stainless Steel/Aluminum 10.5 kg. (23.1 lbs.)Stainless Steel 15.8 kg. (34.8 lbs.)
Shipping Dimensions: 320 x 210 x 390 mm. (12.6” x 8.3” x 15.4”)
112 130
33.5
296 160
83
288 342
132
4MOUNTINGHOLES Ø9
SUCTION INLET1” MALE RJT
170AIR INLET
AIR INLET1/4” BSP(F)
SILENCER1/4” BSP
DISCHARGE OUTLET1” MALE RJT
FLUID FLOW RATEAA
50
100
150
20
40
60
80
100
120
PS
IHE
AD
FEE
TH
EA
D
200
250
280
ME
TRE
SH
EA
D
2
10
20
30
84 6 10 12 1814 16 - UK GPM
40
50
60
70
80
85
10 20 30 40 50 60 70 80 - L/MIN
330 M /hr(17.6 CFM)
310 M /hr(5.8 CFM)
320 M /hr(11.7 CFM)
315 M /hr AIR CONSUMPTION(8.8 CFM)
aR PRES
UR
8 Br AI
SE
(1 6 ps )1
i7.0 Bar(101.5 p )si6.0 Bar(87 psi)
a5.0 B r
)(72.5 psi
4 0 B r.
a(5 psi8
)
r3.0 Ba4( 3.5 psi)
0r
2. Ba2 0i
( 9. ps )
1.5 Bar21.7 ps
(i)
TYPICAL CODE = B15. 01. SA. BB. TTS -LF
MODEL - B15: Standard X15: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSZ: 316 STAINLESS STEEL (POLISHED)
VALVE SEATSE: FOOD GRADE EPDM
VALVE BALLSE: FOOD GRADE EPDMT: PTFES: 316 STAINLESS STEEL
DIAPHRAGMSE: FOOD GRADE EPDMT: PTFEO: ONE PIECE PTFE
NON-WETTED COMPONENTSS: 316 STAINLESS STEELF: NICKEL PLATED ALUMINUM
VALVE TYPEB: BALL
SUCTION ORIENTATIONB: BOTTOM
Dimensions
• • Range of DIN/RJT and Ferrule connections• • Self priming, ideal for emptying containers• • Food grade elastomers-EPDM/PTFE• • Pressures to 8.6 bar (125 PSI)• • Capable of handling high viscosity & S.G.• • Certifi ed CIP cleanable• • EU Design approval• • 316L stainless steel
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS16
MOULDED NON-METALLIC SERIESB25B25
• • Material options suitable for a wide range of chemicals• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8 bar (116 PSI)• • Flow rates up to 152 litres/minute (40 gal/min)• • Flanged or screwed end connections• • Reliable, pneumatic air valve• • Strong, robust design, bolted construction
Technical Data
MOULDED NON-METALLIC SERIES B25 POLYPROPYLENE & PVDF
Performance Curve
Maximum Delivery: 152 ltrs/min (40 gal/min)Max. Working Pressure: 8 bar (116 PSI)Max. Solid Particle Size: 3 mm. (0.12”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1” ANSI #150 Flanged RFInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Polypropylene/Aluminum 13.5 kg. (29.8 lbs.)PVDF/Aluminum 18 kg. (39.7 lbs.)Polyporpylene/Stainless Steel 18 kg. (39.7 lbs.)PVDF/Stainless Steel 20 kg. (44.1 lbs.)
Shipping Dimensions: 440 x 260 x 470 mm. (17.3” x 10.2” x18.5”)
MOUNTINGSLOTS
64
317 CRS
108
DISCHARGE OUTLET1” ANSI 150 FLANGE
AIR INLET3/8” BSP(F)
AIR EXHAUST1/2” BSP(F)
SUCTIONINLET1” ANSI 150 FLANGE
230
115
20 20
205
9222
394432
105
435
ME
TRE
SH
EA
D
99 FEE
TH
EA
D
3042.6
0
14.2
0
28.4
00
10
20
FLUID FLUID FLOWRATEAA
5 10 15 - UK GPM20
0
33
66
6085.2
PS
IHE
AD
56.8
71.0
40
50
99.4
113.6
70
80
197
131
164
230
262
20 40 600 80 100 120 140 160 - L/MIN
25 30 35
8 Bar1(1 6 psi)
7 Bar(1 .5 ps )01 i
75 M /hr(44 CFM)
358 M /hr(34 CFM)
339 M /hr(23 CFM)
319 M /hr(11 CFM)
3
12 (7 CFM)
3M /hr
6 Bar8 )( 7 psi
5 Bar(72. ps5 i)4 Bar
)(58 psi3 Bar(4 .5 p )3 si22 BBar(2 )9 psi1 r R PRESSU E
Ba AIAIR(14. s )5 p i
TYPICAL CODE = B25. 05. PT. BB. EEP -LF
MODEL - B25: Standard X25: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSP: POLYPROPYLENEK: KYNAR (PVDF)G: CONDUCTIVE POLYPROPYLENE
VALVE SEATSB: BUNA-N N: NEOPRENEE: EPDMK: KYNAR (PVDF)P: POLYPROPYLENE
VALVE BALLSB: BUNA -N T: PTFE E: EPDM V: VITONN: NEOPRENES: STAINLESS STEEL
DIAPHRAGMSB: BUNA -N T: PTFE E: EPDM V: VITONH: POLYESTER (HYTREL)N: NEOPRENEP: POLYPROPYLENER: SANTOPRENEO: ONE PIECE PTFE
NON-WETTED COMPO-NENTST: ALUMINUM / EPOXY PAINTEDW: STAINLESS STEEL / EPOXY PAINTED
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
Dimensions
*X Series ATEX pumps are ONLY applicable to Conductive Polypropylene pumps.
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
WWW.BLAGDONPUMP.COM 17
METALLIC SERIES B25B25
• • Material options suitable for a wide range of applications• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 180 litres/minute (48 gal/min)• • Bolted construction for greater integrity• • Weighted Valve Balls for high S.G. and viscous fl uids• • Reliable, pneumatic air valve
Technical Data
METALLIC SERIES B25 ALUMINUM, STAINLESS STEEL, CAST IRON
Performance Curve
Maximum Delivery: 180 ltrs/min (48 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 3 mm. (0.12”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1” BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Aluminum 16 kg. (35.3 lbs.)Cast Iron/Aluminum 25 kg. (55.1 lbs.)Stainless Steel/Aluminum 25 kg. (55.1 lbs.)
Shipping Dimensions: 400 x 300 x 470 mm. (15.8” x 11.8” x 18.5”)
358210
105
226
AIR INLET3/8” BSPPARALLEL
FLUIDOUTLET1” BSPPARALLEL
EXHAUSTSILENCER1/2” BSP
192
50
215
AIR
INLE
T
215
AIR
EX
HA
US
T 329
CR
S
405
FLUIDINLET1” BSPPARALLEL
30 FEE
TH
EA
D
ME
TRE
SH
EA
D
0 0
10
20
FLUID FLOWRATEAA
0
60
40
50
70
80
90
42.6
28.4
14.2
113.6
99.4
71.0
56.8
85.2
PPSS
IIHHEE
AADD
99
33
66
197
131
164
230
262
127.8 295
200 40 60 100 140 160 200 - L/MIN18012080
5 10 15 20 25 - UK GPM4030 35
7 Bar10 .5 s ))( 1 p i6 Bar(87 psi)
4 Barp(58 si)
3 B ra(4 . psi))
3 5
2 Bar(29 psi)1 AI PRESSURE
Bar R 14.5 )( psi
5 Bar72.5 5 psp i))
(
8 BARR(116 si)p
8.6 Bar(125 psi)
19 M /hr(11 CFM)
3 39(23 CFM)
3M /hr 58(34 CFM)
3M /hr 75(44 CFM)(
3M /hr 100(59 CFM)
3M /hr
12(7 CFM)(
3M /hrh
TYPICAL CODE = B25. 05. AA. BB. BBS -LF
MODEL - B2505: Standard X2505: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSA: ALUMINUMS: 316L STAINLESS STEELC: CAST IRON
VALVE SEATSS: 316 STAINLESS STEEL
VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENE D: DELRINS: 316 STAINLESS STEEL
DIAPHRAGMSB: BUNA-N P: POLYURETHANE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE
NON-WETTED COMPONENTSA: ALUMINUMS: 316L STAINLESS STEEL
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS18
PTFE - NON-METALLIC SERIESB25B25
• • Simple construction, easy to maintain• • Available in virgin and conductive PTFE• • Chemically inert• • Flanged end connections• • ATEX approved - intrinsically safe• • Reliable, proven pneumatic air valve• • Strong, robust design
Technical Data
NON-METALLIC SERIES B25CONDUCTIVE / VIRGIN PTFE
Performance Curve
Maximum Delivery: 136 ltrs/min (36 gal/min)Max. Working Pressure: 7 bar (102 PSI)Max. Solid Particle Size: 3 mm. (0.12”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1” BSP / ANSI #150 FlangeInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Conductive PTFE 40 kg. (88.2 lbs.)Virgin PTFE 37 kg. (81.6 lbs.)
Shipping Dimensions: 500 x 300 x 450 mm. (19.7” x 11.8” x 17.7”)
60 281 188
63
298
137 1” BSP PARALLELFLUID OUTLET
1” BSP PARALLELFLUID INLET
AIR EXHAUST1/2” BSP
201386
411
230GROUNDING LEADATTACHED TO BASE LEG.(ATEX CERTIFIED MODELS ONLY)
212AIR INLET
AIR INLET3/8” BSP
391
ME
TRE
SH
EA
D
FEE
TH
EA
D
7.0 Bar1 p
(10 .5 si))
6.0 aB r(8 p i)7 s
5.0 rBa(72.5 ppsi)
. Bar4 0(5 p i)8 s
33 BBaar..00(4 .5 p i3 s )
2.0 Bar(2 .0 psi)9.1 5 Bar
1(2 .7 ppssii))
40 M 3/3 hr
30 M3/3 hr AIR CONSUMPTION
20 M3/3 hr
(23.5 CFM)
(17.6 CFM)
(11.7 CFM)
(38 CFM)65 /hr3//M
PPSS
IIHHEE
AADD
FLUID FLOWRAATETEAAAA
50
100
150
200
250
279
20
40
60
80
100
120
10
20
30
40
50
60
70
80
85
2020 4040 6060 80 100100 120120 140 160 L/MIN
4 168 12 220 24 - UK GGPM28 32
TYPICAL CODE = B25. 05. T5. BB. TTT -LF
MODEL - B25: Series 00 X25: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTST: PTFE4: CONDUCTIVE PTFE
VALVE SEATST: PTFE
VALVE BALLST: PTFE
DIAPHRAGMST: PTFEX: PTFE/VITON (HIGH TEMP.)
NON-WETTED COMPONENTS4: CONDUCTICE PTFE5: POLYTHYLENE (HDPE)
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
Dimensions
FLUID UID FLOWRAAF TETEAA
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
*X Series ATEX pumps are ONLY applicable to Conductive PTFE pumps.
WWW.BLAGDONPUMP.COM 19
FULL FLOW HIGH PRESSURE B25B25
• • Robust construction, easy to maintain• • Can easily handle viscous, high S.G. and high head applications• • Smooth action, less vibration and wear• • Pressures to 16 bar (232 PSI)• • Flow rates up to 125 litres/minute (33 gal/min)• • Bolted construction for greater integrity• • Reliable pneumatic air valve• • Stalls against closed head without damage• • Re-start on demand
Technical Data
METALLIC SERIESFULL FLOW 2:1 B25
Performance Curve
Maximum Delivery: 125 ltrs/min (33 gal/min)Max. Working Pressure: 16 bar (232 PSI)Max. Solid Particle Size: 3 mm. (0.12”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Stainless Steel/Aluminum 33 kg. (72.8 lbs.)Aluminum 24.5 kg. (54 lbs.)
Shipping Dimensions: 480 x 320 x 480 mm. (18.9” x 12.6” x 18.9”)
254
405
464
438
72 105
250
50
330
280
MOUNTING HOLESØ 8.5 THRO’
DISCHARGE OUTLET1” BSP (F)
3/8” BSP (F)AIR INLET
AIR EXHAUST1/2” BSP(F)
202AIR INLET
SUCTION INLET1” BSP (F)
100
FLUID FLOW RATEAA
ME
TRE
SH
EA
D
60
40
20
40
80
20
4 8
40 60
12
80
16
180
160
140
120
100
80PS
IHE
AD
120
160
200
240
200
100
- UK GPM2820
120
24
140
32
- L/MIN
600
500
400
300
FEE
TH
EA
D
0
370 M /hr(41.2 CFM)
314 M /hr(8.2 CFM)
358 M /hr(34.2 CFM)
350 M /hr(29.4 CFM)
325 M /hr(14.7 CFM)
340 M /hr AIR CONSUMPTION(23.5 CFM)
1.5 Bar(21.7 psi)
2.0 Bar0(29. psi)
. a3 0 B r3 5 ps
(4 .i)
.0 Ba4
r(58 psi)
5 Ba.0 r(7(7 .5 p i2
s )
6.0 Bar(87 p i)s
7.0 BBar((10 .si)
1 5 p
8a A R
RESRE
.0 Br
IP
SU
6i)
((11ps
TYPICAL CODE = B25. 05. AA. W3. NNS
MODEL - B25: Series 00 X25: ATEX Approved
DESIGN LEVEL
WETTED COMPONENTSA: ALUMINUMS: 316 STAINLESS STEEL
VALVE SEATSS: 316 STAINLESS STEEL
VALVE BALLST: PTFEN: NEOPRENEB: BUNA-NE: EPDMS: STAINLESS STEELV: VITON
DIAPHRAGMST: PTFEN: NEOPRENEB: BUNA-NR: SANTOPRENEE: EPDMH: POLYESTER (HYTREL)O: ONE PIECE PTFEP: POLYURETHANEV: VITON
NON-WETTED COMPONENTSA: ALUMINUM
VALVE TYPEB: BALLW: WEIGHTED
MODEL DESIGNATION
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS20
HYGIENIC SERIESB25B25
• • Range of DIN/RJT and Ferrule connections• • Self priming, ideal for emptying containers• • Food grade elastomers-EPDM/PTFE• • Pressures to 8.6 bar (125 PSI)• • Capable of handling high viscosity & S.G.• • Certifi ed CIP cleanable• • EU Design approval• • 316L Stainless Steel
Technical Data
HYGIENIC SERIES B25STAINLESS STEEL
Performance Curve
Maximum Delivery: 136 ltrs/min (36 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 5 mm. (0.2”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1” RJT Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Stainless Steel 21.5 kg. (47.4 lbs.)
Shipping Dimensions: 450 x 280 x 500 mm. (17.7” x 11” x 19.7”)
160 126.5
SUNCTIONINLET1” MALE RJT
DISCHARGE OUTLET1” MALE RJT
AIR INLET3/8” BSP(F)
SILENCER1/2” BSP
223AIR INLET
160220
55
432
226413
108187
356
4 MOUNTING HOLES Ø 9
FLUID FLOW RAATETEAAAA
10
20
30
40
50
60
70
80
ME
TRE
SH
EA
D
20
40
60
80
100
120
PS
IHE
AD
FEE
TH
EA
D
85
50
100
150
200
250
279
2020 4040 6060 80 100100 120120 140 160 L/MIN
4 168 12 2020 24 - UK GPPM28 32
365 M /hr(38 CFM)
3.00 ararBB( 3 5 psi)4 .
4.0 arB58 p i)( s
5.0 Bar(72.5 psi)
B6.0 ar(8 s7 p i)
7 0 Ba. r0 5 p i)(1 1. s
320 M /hr(11.7 CFM)
340 M /hr(23.5 CFM)
330 M /hr AIR CONSUMPTION(17.6 CFM)
Bar IS UU
8.0A R PRE S RRE
16i)
(1ps
.0 Bar2(29.0 psi)5 r1. Ba
.(21 7 psi)
TYPICAL CODE = B25. ZF. BB. EEE -LF
MODEL - B15: Standard X15: ATEX Approved LUBE FREE
WETTED COMPONENTSZ: 316 STAINLESS STEEL (ELECTRO POLISHED)
VALVE SEATSE: FOOD GRADE EPDMS: 316 STAINLESS STEEL
VALVE BALLSE: FOOD GRADE EPDMT: PTFES: 316 STAINLESS STEEL
DIAPHRAGMSE: FOOD GRADE EPDMT: PTFE
NON-WETTED COMPONENTSS: 316 STAINLESS STEELF: NICKEL PLATED ALUMINUM
VALVE TYPEB: BALL
SUCTION ORIENTATIONB: BOTTOM
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
WWW.BLAGDONPUMP.COM 21
METALLIC SERIES B40B40
*Pumps with cast iron wetted components are supplied at design level 01.
• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 320 litres/minute (85 gal/min)• • Bolted construction for greater integrity• • Reliable, proven pneumatic air valve system
Technical Data
METALLIC SERIES B40 ALUMINUM, CAST IRON, STAINLESS STEEL
Performance Curve
Maximum Delivery: 320 ltrs/min (85 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1 1/2” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Aluminum 22 kg. (48.5 lbs.)Stainless Steel/Aluminum 36 kg. (79.4 lbs.)Stainless Steel 46 kg. (101.4 lbs.)Stainless Steel/Cast Iron 46 kg. (101.4 lbs.)Cast Iron/Aluminum 51.4 kg. (113.3 lbs.)Cast Iron 61 kg. (134.5 lbs.)
Shipping Dimensions: 500 x 350 x 600 mm. (19.7” x 13.8” x 23.6”)
204178
FLUID SUCTIONINLET 1”1/2 BSP
AIR INLET3/8” BSP
FLUID DISCHARGEOUTLET 1”1/2 BSP
SILENCER1/2” BSP(M)
271AIR INLET
270
441243
117.5
549
486 IN-LINE MANIFOLD
470
4856
251
13 SLOT
FLUID FLOW RATEAA
10
20
30
40
50
60
70
80
ME
TRE
SH
EA
D
50
100
150
20
40
60
80
100
120
PS
IHE
AD
FEE
TH
EA
D
200
250
85 279
- L/MIN50 100 150 200 250 300 3500
0 10 3020 5040 8060 - UK GPM70
360 M /hr AIR CONSUMPTION(35.3 CFM)
320 M /hr(11.7 CFM)
390 M /hr(53 CFM)
3100 M /hr(58.8 CFM)
3115 M /hr(67.5 CFM)
380 M /hr(47 CFM)
RRR
S
E
8.0 Bar AAIIP
ESUR
( 11 6 psi)7.0 Bar(1.5
si)
01p
6.0 Bar(87 psi)
5.0 Bar72.i
( 5 ps )4.0 Bar(58 psi)
3.0 Bar5 s
(43. p i)
2 0. Bar29 psi)
( .0B1.5 ar21.( 7 psi)
340 M /hr(23.5 CFM)
TYPICAL CODE = B40. 05. AA. BB. BBS -LF
MODEL - B40: Standard X40: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSA: ALUMINUMC: CAST IRONS: 316L STAINLESS STEEL
VALVE SEATSB: BUNA-N A: ALUMINUME: EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL
VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL
DIAPHRAGMSB: BUNA-N P: POLYURETHANE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE
NON-WETTED COMPONENTSA: ALUMINUMC: CAST IRONS: 316L STAINLESS STEEL
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
The above drawing shows Aluminum and Cast Iron only.
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS22
MOULDED NON-METALLIC SERIESB50B50
• • Simple construction, easy to maintain• • Capable of handling high S.G. and viscous fl uids• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 530 litres/minute (140 gal/min)• • Flanged end connections• • Reliable, proven pneumatic air valve
Technical Data
MOULDED NON-METALLIC SERIES B50 POLYPROPYLENE & PVDF
Performance Curve
Maximum Delivery: 530 ltrs/min (140 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” ANSI #150 Flanged RFInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Polypropylene/Aluminum 39.5 kg. (87.1 lbs.)PVDF/Aluminum 50.5 kg. (111.3 lbs.)Polyporpylene/Stainless Steel 50.5 kg. (111.3 lbs.)PVDF/Stainless Steel 70 kg. (154.3 lbs.)
Shipping Dimensions: 630 x 380 x 670 mm. (24.8” x 15” x 26.4”)
234280
324
620
289AIR INLET
AIR INLET3/4” BSP(F)
DISCHARGE OUTLET2” ANSI 150 FLANGE
AIR EXHAUST3/4” BSP(F)
SUCTION INLET2” ANSI150 FLANGE
139
321561
617
14880
464
FEE
TH
EA
D
PS
IHE
AD
ME
TRE
SH
EA
D
FLUIDD FFLOW RATEAA
00 20 40
20
40
60
00 5050 100100
1010
20
200200150150 250
3030
40
- UK GPM6060 80 1000
550 - L/Min
131
98
66
33
350350300300 400400 500450
80
100
120
60
50
70
80 262
229
197
164
1220
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM) 360 M /hr
(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.00 BB rr4
a((55 psi)8
3 aa.0 BB rr4444 5.5 psi
(((( 33))
B1.5 ar1.1.(2( 777 psi)psi)
2 0. BBarar29 psi))))
(( .0
8.0 Bar AIR PRREESSSSUURE
( 16 p i)1
s
.0a
7B rr((1
.5i
01ps )
6.0 Bar(87 psi)
.0 Baa5
rr2. p i
(75
s )
TYPICAL CODE = B50. 05. PT. BB. EEP -LF
MODEL - B50: Standard X50: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSP: POLYPROPYLENEK: KYNAR (PVDF)G: CONDUCTIVE POLYPROPYLENE
VALVE SEATSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENEP: POLYPROPYLENE
VALVE BALLSB: BUNA -N T: PTFE E: EPDM V: VITONN: NEOPRENES: 316 STAINLESS STEEL
DIAPHRAGMSB: BUNA -N T: PTFE E: EPDM V: VITONH: POLYESTER (HYTREL)N: NEOPRENEP: POLYPROPYLENER: SANTOPRENEO: ONE PIECE PTFE
NON-WETTED COMPONENTST: ALUMINUM / EPOXY PAINTEDW: STAINLESS STEEL / EPOXY PAINTED
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
Dimensions
*X Series ATEX pumps are ONLY applicable to Conductive Polypropylene pumps.
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
WWW.BLAGDONPUMP.COM 23
METALLIC SERIES B50B50
• • Air valve designed for in-line maintenance• • End ported for improved fl ow• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 530 litres/minute (140 gal/min)• • Bolted construction for greater integrity• • Robust construction
Technical Data
METALLIC SERIES B50ALUMINUM & CAST IRON
Performance Curve
Maximum Delivery: 530 ltrs/min (140 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Aluminum 38 kg. (83.8 lbs.)Cast Iron/Aluminum 63 kg. (138.9 lbs.)Cast Iron 90 kg. (198.4 lbs.)
Shipping Dimensions: 540 x 350 x 750 mm. (12.3” x 13.8” x 29.5”)
256 118.5
625578 CRS
14 4760
460229 CRS
20 SLOT DEPTH
SUCTION INLET2” BSP
AIR INLET3/4” BSP
340AIR INLET/EXHAUST
254127
663
139
316246.5
493 IN-LINE OPTIONDISCHARGE OUTLET2” BSP
FEE
TH
EA
D
PS
IHE
AD
ME
TRE
SH
EA
D
FLUID FLOW RATEAA
0 20 40
20
40
60
0 50 100
10
20
200150 250
30
40
- UK GPM60 80 100
550 - L/Min
131
98
66
33
350300 400 500450
80
100
120
60
50
70
80 262
229
197
164
120
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM) 360 M /hr
(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.0 B rr4
a((55 psi)8
3 aa.0 BB rr44 .5 psi
(( 3))
B1.5 ar1.(2 77 psi)
2 0. BBarar29 psi)))
(( .0
8.0 Bar AIR PRREESSSSUURE
( 16 p i)1
s
.0a
7B rr((1
.5i
01ps )
6.0 Bar(87 psi)
.0 Baa5
rr2. p i
(75
s )
TYPICAL CODE = B50. 05. AA. BB. BBB -LF
MODEL - B50: Standard X50: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSA: ALUMINUMC: CAST IRON
VALVE SEATSB: BUNA-N A: ALUMINUME: EPDM T: PTFEN: NEOPRENE S: 316 STAINLESS STEEL
VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL
DIAPHRAGMSB: BUNA-N P: POLYURETHANE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE
NON-WETTED COMPONENTSA: ALUMINUMC: CAST IRON
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS24
METALLIC SERIESB50B50
• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 530 litres/minute (140 gal/min)• • Bolted construction for greater integrity• • 316 stainless steel
Technical Data
METALLIC SERIES B50STAINLESS STEEL
Performance Curve
Maximum Delivery: 530 ltrs/min (140 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Stainless Steel/Aluminum 70 kg. (154.3 lbs.)Stainless Steel 95.5 kg. (210.5 lbs.)Stainless Steel/Cast Iron 95.5 kg. (210.5 lbs.)
Shipping Dimensions: 630 x 380 x 670 mm. (24.8” x 15” x 26.4”)
130
260328
30
269AIR INLET
AIR INLET3/4” BSP(F)
FLUID OUTLET2” BSP(F)
FLUID INLET2” BSP(F)
169
381 110
64
579
590139
478
Ø8.7 HOLES THRO’ BASE LEG
FEE
TH
EA
D
PS
IHE
AD
ME
TRE
SH
EA
D
FLUID FLOW RFLO ATEAA
0 20 40
20
40
60
00 5050 100100
1010
20
200200150150 25025
3030
40
- UK GPM606 80 1000
550 - L/Min
131
98
66
33
350350300300 400400 5004450
80
100
120
60
50
70
80 262
229
197
164
120
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM) 360 M /hr
(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.00 BB rr4
a((55 psi)8
3 aa.0 BB rr4444 5.5 psi
((( 33))
B1.5 ar1.(2 7777 psi)psi)
2 0. BBarar29 psi))))
(( .0
8.0 Bar AIR PRREESSSSUURE
( 16 p i)1
s
.0a
7B rr((1
.5i
01ps )
6.0 Bar(87 psi)
.0 Baa5
rr2. p i
(75
s )
TYPICAL CODE = B50. 05. SA. BB. BBS -LF
MODEL - B50: Standard X50: ATEX Approved
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSS: 316L STAINLESS STEEL
VALVE SEATSB: BUNA-N A: ALUMINUME:EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL
VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL
DIAPHRAGMSB: BUNA-N P: POLYURETHANE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE
NON-WETTED COMPONENTSA: ALUMINUMS: 316L STAINLESS STEEL
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
WWW.BLAGDONPUMP.COM 25
FULL FLOW HIGH PRESSURE B50B50
• • Robust construction, easy to maintain• • Can easily handle viscous, high S.G. and high head applications• • Smooth action, less vibration and wear• • Pressures to 16 bar (232 PSI)• • Flow rates up to 350 litres/minute (92 gal/min)• • Bolted construction for greater integrity• • Reliable pneumatic air valve• • Stalls against closed head without damage• • Re-start on demand
Technical Data
METALLIC SERIES- FULL FLOW 2:1 B50 STAINLESS STEEL, ALUMINUM
Performance Curve
Maximum Delivery: 350 ltrs/min (92 gal/min)Max. Working Pressure: 16 bar (232 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Stainless Steel/Aluminum 78 kg. (172 lbs.)Aluminum 52 kg. (114.6 lbs.)
Shipping Dimensions: 850 x 450 x 800 mm. (33.5” x 17.7” x 31.5”)
212577
130260320
67
280
595490
AIR INLET3/4” BSP(F)
FLUID INLET2” BSP(F)
FLUID OUTLET2” BSP(F)
SILENCER (FITTED)
3/4” BSP(M)
316729139
4 HOLES THRO’ Ø8.5
FEE
TH
EA
D
ME
TRE
SH
EA
D
100 231
200 250 3000 50 100 150
20
40
60
80
350 - L/min
46
92
138
185
110
90
10
20
30
40
50
60
70
80
100
130
120
140
150
160
PS
IHE
AD
120
140
160
180
200
220
277
323
369
416
462
508
FLUID FLOW RATEAA10 80 - UK GPM20 30 40 50 60 70
80B80
aAIR
ESSUREE
0000r
PR
11sii))
((6pp
aa7.0 BB rr.5 p i
(101s )
BB66.00
aarr7(8ppsi))
5.0 Barr72. p )(( 5 si
4.0arB(5 p i)
8 s3.0 Bar(4(43.5 ps )i
B r1.5 a1.(2 7 psi)
2.0 Bar2929.. p i)
( 0 0 s
330 M /hr(17.6 SCFM)
340 M /hrhr(23.5 CFM)F
3180 M /hr(106 CFM)
3160 M /hr(94 CFM)
390 M /hr(53 CFM)
365 M /hr(38 CFM)
3135 M /hr AIR CONSUMPTION(79.5 CFM)
TYPICAL CODE = B50. 05. SA. W3. BBS
MODEL - B50: Standard X50: ATEX Approved
DESIGN LEVEL
WETTED COMPONENTSA: ALUMINUMS: 316 STAINLESS STEEL
VALVE SEATSS: 316 STAINLESS STEELA: ALUMINUM
VALVE BALLST: PTFEN: NEOPRENEB: BUNA-NE: EPDMS: STAINLESS STEELV: VITON
DIAPHRAGMST: PTFEN: NEOPRENEB: BUNA-NR: SANTOPRENEE: EPDMH: POLYESTER (HYTREL)O: ONE PIECE PTFEP: POLYURETHANEV: VITON
NON-WETTED COMPONENTSA: ALUMINUM
VALVE TYPEB: BALLW: WEIGHTED
MODEL DESIGNATION
The above drawing shows Stainless Steel only.
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS26
HYGIENIC SERIESB50B50
DESIGN LEVEL
• • Range of DIN/RJT and ferrule connections• • Self priming, ideal for emptying containers• • Food grade elastomers-EPDM/PTFE• • Pressures to 8.6 bar (125 PSI)• • Capable of handling high viscosity & S.G.• • Certifi ed CIP cleanable• • EU Design approval• • 316L Stainless Steel• • Pump stand option for 180° rotation in place
Technical Data
HYGIENIC SERIES B50STAINLESS STEEL
Performance Curve
Maximum Delivery: 500 ltrs/min (132 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 10 mm. (0.39”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” RJT (Standard)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weight:Stainless Steel 64 kg. (141.1 lbs.)
Shipping Dimensions: 660 x 430 x 880 mm. (26” x 16.9” x 34.7”)
198
689
540270
30572
SUCTION INLET2” RJT - STANDARD OTHER OPTIONS AVAILABLE
90
714598
382AIR
EXHAUST
AIR EXHAUST
3/4” BSP
322225
Ø61 RUBBER MOUNTING PADS (M8 FIXING BOLTS)
AIR INLET3/4” BSP
DISCHARGE OUTLET - 2” RJT STANDARDOTHER OPTIONS AVAILABLE
382AIR INLET
FEE
TH
EA
D
ME
TRE
SH
EA
D
FLUID FLOW RW RAATEAA
PS
IHE
AD
10
0
20
30
40
50
60
70
80
100
0
20
40
60
80
120
00
0
100 - 00 - UK GPMUK GPM2020
100 200 300 400 500 - L/MIN0
33
66
99
131
164
197
230
262
4040 6060 8080
a77.00 B r(10000 psi)
a8.0 B r(
s )116 p i
4 1 a. B r6 p i( 0 s )
1 BaSS RE
.4 r AIR PRE U2 p( 0 si)
a22.77 BB r0 s(4 p i)
5.5 BBaar80 psii))(
330 M /hr(17.6 CFM)
370 M /hr(41 CFM)
3110 M /hr(65 CFM)
3150 M /hr AIR CONSUMPTION(88 CFM)
TYPICAL CODE = B50. 05. ZF. BB. EEE -LF
MODEL - B50: Standard X50: ATEX Approved LUBE FREE
WETTED COMPONENTSZ: 316 STAINLESS STEEL (ELECTRO POLISHED)
VALVE SEATSE: FOOD GRADE EPDMT: PTFE
VALVE BALLSE: FOOD GRADE EPDMT: PTFES: 316 STAINLESS STEEL
DIAPHRAGMSE: FOOD GRADE EPDMO: ONE PIECE PTFE
NON-WETTED COMPONENTSS: 316 STAINLESS STEELF: NICKEL PLATED ALUMINUM
VALVE TYPEB: BALL
SUCTION ORIENTATIONB: BOTTOM
Dimensions
FLUID FLOW RRAA
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
WWW.BLAGDONPUMP.COM 27
Maximum Delivery: 901 ltrs/min (238 gal/min)Max. Working Pressure: 7 bar (102 PSI)Max. Solid Particle Size: 18 mm. (0.71”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 5.1 m. (16.8’)Fluid Inlet/Outlet: 3” ANSI FlangeInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Polypropylene 105 kg. (231.5 lbs.)PVDF 143 kg. (315.3 lbs.)
Shipping Dimensions: 558 x 965 x 1219 mm. (22” x 38” x 48”)
MOULDED NON-METALLIC SERIES B75B75
• • Simple construction, easy to maintain• • Capable of handling high S.G. and viscous fl uids• • Pressures to 7 bar (102 PSI)• • Flow rates up to 901 litres/minute (238 gal/min)• • Adjustable fl anged connections• • Reliable, proven pneumatic air valve
Technical Data
MOULDED NON-METALLIC SERIES B75 POLYPROPYLENE & PVDF
Performance Curve
Dimensions
0 20 40 60 80 100 120 140 160 180 200 220
85075065055045035025015050
100
90
80
70
60
50
40
30
20
10
0
1
2
3
4
5
6
7
0
30
2025
1015
5
9.1
67.6
34.5
1.5
20 (34)40 (68)
60 (102)80 (136)3
100 (170)1
120 (204)(2
140 238)(
CAPACITY
U.S. Gallons per minute
Liters per minute
BAR
PSI
HEA
D
NPS
HR
MET
ERS
FEET
))40 PSI (2.72 Bar)
20 PSI (1.36 Bar))I (1.36 Bar)
))
SI (5.44 (
80 PP0 PSI (5.44 Bar)
ssurerAir Inlet Pressuree
1000 PSI .8 Bar)(6.8 Bar)(6
)(6.8 Bar)
r)r)(4.08 B
60 PSIar))
60 PSI (4.08 Bar)
TYPICAL CODE = B75. 02. PT. BB. TTP -LF
MODEL - B75: Standard
DESIGN LEVEL
LUBE FREE
WETTED COMPONENTSP: POLYPROPYLENEK: PVDF
NON-WETTED COMPONENTST: ALUMINUM / EPOXY PAINTED
VALVE SEATSP: POLYPROPYLENEK: PVDF
VALVE BALLST: PTFER: SANTOPRENE
DIAPHRAGMST: PTFER: SANTOPRENE
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
NEW
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS28
• • Air valve will not stall in mid position• • Air valve designed for in-line maintenance• • Available as both end and center ported• • Pressures to 7 bar (102 PSI)• • Flow rates up to 889 litres/minute (234.8 gal/min)• • Bolted construction for greater integrity• • Robust construction
BAARR
PSI
HEA
D
20(34) 40(68)60(102)
80(136)
100(170)
100
80
60
40
20
00
1
2
3
4
5
6
7
120(204)
1140(238)
00(6 8 B rr)
1 0 PSS . aaII
PS . 4 B8
I ((5 44 a00
r))
6 PP I(( 4. 8 ar)))0 SS 0 B
a0 P I ((2 22
4 S .77 B r))
r r u00 P ((1 6 B llePe e re
22 SI .3 a )) Ai IInn PP r ss
30
2025
1015
5
9.1
67.6
34.5
1.5
NPS
HR
MET
ERS
FEET
0
0
100
20
200
40
300
60
4000
80 1000 12020 140 160 180 200 220 240
500 600 700 800 900
Liters per mer inuteinute
CAPACITYYPP
U.S. . Gallons pper minute
3CFM (M /hr)
Maximum Delivery: 889 ltrs/min (234.8 gal/min)Max. Working Pressure: 7 bar (102 PSI)Max. Solid Particle Size: 10 mm. (0.4”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4 m. (13.1’)Fluid Inlet/Outlet: 3” BSP Tapered (End Ported) DIN Flanged (Center Ported)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Aluminium 53.5 kg. (117.7 lbs.)Cast Iron/Aluminum 90 kg. (198 lbs.)Stainless Steel/Aluminum 90 kg. (198 lbs.)
Shipping Dimensions: 720 x 350 x 900 mm. (28.3” x 13.8” x 35.4”)
Technical Data
METALLIC SERIES B75
Performance Curve
TYPICAL CODE = B75. 01. AA. BB. BBB
MODEL - B75: Standard X75: ATEX Approved
DESIGN LEVEL
WETTED COMPONENTSA: ALUMINIUMC: CAST IRONS: STAINLESS STEEL
VALVE SEATSB: BUNA-N A: ALUMINIUME: EPDM T: PTFEN: NEOPRENE V: VITONS: 316 STAINLESS STEEL
VALVE BALLSB: BUNA-N T: PTFEE: EPDM R: SANTOPRENE N: NEOPRENE
DIAPHRAGMSB: BUNA-N V: VITONE: EPDM T: PTFEN: NEOPRENER: SANTOPRENE
NON-WETTED COMPONENTSA: ALUMINIUMC: CAST IRON
VALVE TYPEB: BALLW: WEIGHTED
SUCTION ORIENTATIONB: BOTTOM
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
422
129
60
200
257
3/4” BSPAIR INLET
1” BSPEXHAUST
149
701
298
761
16
815
327
435
577
184
305
367
62
10
METALLIC SERIESB75B75
*End ported version only available in aluminum and cast iron, and center ported versions only available in stainless steel.
WWW.BLAGDONPUMP.COM 29
AIRVANTAGE METALLIC SERIES AVB75AVB75
•• All bolted construction •• Ball check valves •• Durable diaphragm connecting rod •• Light weight - portable •• 90° - 180° manifold connection rotation •• Solids range +.25" (6mm) to .38" (9.65mm) •• Dry primes up to 20 feet of water •• Complete center section upgrade kits available
CAPPACACITYLiters pperer minute
BAR
PSI
HEA
D
100
80
60
40
20
00
1
2
3
4
5
6
7
0 20 40 60 80 100 120 140 160 180 200
9008007006005004003002001000
220 240 260U.S. Gallons per minute
10(17)20(34)
30(51))400((68)50(85)8
660(102)70070((119)
80080(136)
90(153)5
00 PSI (6.8 Bar)
100 PSI (6.8 Bar)
))80 P80 PSI (5.44 Bar)
60 PSI (4.08 Bar)
B )B40 PSI (2.72 Bar)
Maximum Delivery: 889 ltrs/min (235 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 9.65 mm. (.38”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Fluid Inlet/Outlet: 3” BSP Tapered (End Ported) DIN Flanged (Center Ported)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Technical Data
METALLIC SERIES AVB75 & AVX75
Performance Curve
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
Visit the Blagdon AirVantage website at www.airvantagepump.com/blagdon to learn more about this award winning technology.
*End ported version only available in aluminum and cast iron, and center ported versions only available in stainless steel.
AVX75: ATEX Approved AVB75: Standard
NEW
Characteristics
Flui
d C
hara
cter
istic
sIn
stal
latio
nD
uty
Standard DutyAirVantage
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS30
Maximum Delivery: 265 ltrs/min (70 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 25 mm. (0.98”)Air Inlet: 1/2” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 5.8 m. (19’) Fluid Inlet/Outlet: 1” BSP Tapered / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Aluminium 21 kg. (46.3 lbs.)Cast Iron 34 kg. (75 lbs.)Stainless Steel 36 kg. (79.4 lbs.)
Shipping Dimensions: 381 x 457 x 482 mm. (15” x 18” x 19”)
METALLIC SERIESX25X25
Technical Data
METALLIC SERIES X25
Performance Curve
TYPICAL CODE = X25. 01. CC. FT. BBS
MODEL - X25: ATEX Approved
DESIGN LEVEL
WETTED COMPONENTSA: ALUMINIUMC: CAST IRONS: STAINLESS STEEL
VALVE SEATSS: STAINLESS STEEL
VALVE FLAPSB: NITRILEN: NEOPRENER: SANTOPRENEP: POLYURETHANEH: HYTRELV: FKME: EPDM
DIAPHRAGMSB: NITRILER: SANTOPRENEN: NEOPRENEV: VITONE: EPDMH: HYTREL
NON-WETTED COMPONENTSA: ALUMINIUMC: CAST IRON
VALVE TYPEF: FLAP
SUCTION ORIENTATIONT: TOP
Dimensions
• • Bottom discharge ported for effi cient solids handling• • Air valve will not stall in mid position• • Air valve designed for in-line maintenance• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 265 litres/minute (70 gal/min)• • Bolted construction for greater integrity• • Flap Valve pump for line size solids handling
40 PSI
60 PSI
80 PSI
10(17)
20(34)
40(68)
30(51)
500 85)(8
100 PSIPSI(6.8 Bar)Bar
(2 72(2.72 BBar)
(4.08 Bar)
(5.44 Bar)ar)
(1.36 Bar)
100
80
60
40
200
00 10 20 30 40 50 60 70 80
0 100100757550502525 150125125 200175 225 250 275 275
BA
R
0
1
2
7
3
4
5
6
PS
I
20 PSI Air Inlet Pressurenlete
Liters pper mer minute
U.S. Galallons pper minute
CAPACITYCITY
HE
AD
AIR CONSUMPTIONSCFM (M3/hr3 )
16.73425
DISCHARGE PORT1" NPTF or
14.03356
5.80147
2.3860
10.80274
.7218
5.54141
2.3860
16.41417
(OPTIONAL 90AIR EXHAUST3/4" NPTM
SUCTION PORT1” NPTF or1” BSPF
PORT ROTATT TION)AA
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
NEW
WWW.BLAGDONPUMP.COM 31
Maximum Delivery: 530 ltrs/min (140 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 50 mm. (1.97”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 7.3 m. (24’)Fluid Inlet/Outlet: 2” NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Aluminium 39 kg. (86 lbs.)Cast Iron 76 kg. (167.6 lbs.)Stainless Steel 76 kg. (167.6 lbs.)
Shipping Dimensions: 406 x 584 x 584 mm. (16” x 23” x 23”)
METALLIC SERIES X50X50
Technical Data
METALLIC SERIES X50
Performance Curve
TYPICAL CODE = X50. 01. CC. FT. BBS
MODEL - X50: ATEX Approved
DESIGN LEVEL
WETTED COMPONENTSA: ALUMINIUMC: CAST IRONS: STAINLESS STEEL
VALVE SEATSS: STAINLESS STEEL
VALVE FLAPSB: NITRILEN: NEOPRENER: SANTOPRENEH: HYTRELP: POLYURETHANEV: FKME: EPDM
DIAPHRAGMSB: NITRILER: SANTOPRENEN: NEOPRENEE: EPDMV: FKM
NON-WETTED COMPONENTSA: ALUMINIUMC: CAST IRON
VALVE TYPEF: FLAP
SUCTION ORIENTATIONT: TOP
Dimensions
40 PSI
60 PSI
80 PSI
100 PSI
10
0
20
30
40
50
60
70
80
90
100
200 40 60 80 100 120 140 160
10(17) 20(34)30(51)
40(68)50(85)
60(101.9))
70(118.9)80(135.9)
90(152.9)
100(169.9)
150(254.9)
0 200 300 400 500 600
BA
R
100
0
1
2
3
4
5
6
7
PS
I
125(212.4)5(2
20 PSI Air IInlet PressureP en
Liters per minute
U.S. Gallons per minute
CAPACITY
AIR CONSUMPTION SCFM (M(( 3/hr)3
HE
AD
• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • High quality investment cast design• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 530 litres/minute (140 gal/min)• • Bolted construction for safety• • Reliable pneumatic air valve system
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
9.819.81249249
19.8719.87505505
20.3020.30516516
OPTIONALOPTIONALVERTICALVERTICALSUCTIONSUCTION
PORTPORT
13.5513.55
2" NPT SUCTION PORT2" NPT SUCTION PORT
NEW
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS32
B 06B 06
Maximum Delivery: 998 ltrs/min (264 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 75 mm. (3”)Air Inlet: 1/2” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 5.5 m. (18’)Fluid Inlet/Outlet: 3” ANSI FlangeInstallation: Surface mountedAccessories Included: Exhaust air Silencer
Shipping Weights:Aluminium 92 kg. (202.8 lbs.)
Shipping Dimensions: 533 x 965 x 939 mm. (21” x 38” x 37”)
METALLIC SERIESX75X75
• • Bottom discharge ported for effi cient solids handling• • Air valve will not stall in mid position• • Air valve designed for in-line maintenance• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 998 litres/minute (264 gal/min)• • Bolted construction for greater integrity• • Robust construction
Technical Data
METALLIC SERIES X75
Performance Curve
TYPICAL CODE = X75. 01. AA. FT. BBS
MODEL - X75: ATEX Approved
DESIGN LEVEL
WETTED COMPONENTSA: ALUMINIUM
VALVE SEATSS: STAINLESS STEEL
VALVE BALLSB: NITRILEN: NEOPRENER: SANTOPRENEH: HYTRELP: POLYURETHANE
DIAPHRAGMSB: NITRILER: SANTOPRENEN: NEOPRENE
NON-WETTED COMPONENTSA: ALUMINIUM
VALVE TYPEF: FLAP
SUCTION ORIENTATIONT: TOP
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
100
20
30
40
505
60
70
80
90
200 40 60 80 1000 1200 140 160 1800 200 220 240 260
20(34) 40(68)60(101.9)
80(135.9)
100(169.9)
60 PSSI
40 PSSI
20 PSI Air Inle reeSI Air Inlet Preessuressure
100
Liters ps per er mi tinute
U.S. GalG lonss per minute
CAPACIAC TY
0 100100 200200 300300 400400 50000 600600 70070 800 900 1000
AIR CONSUMPTION SCFM (M(( 3/hr)3B
AR
AR
HE
AD
0
1
2
3
4
5
6
7
PS
I
120(203.9)1120(203.9)
100 PSI0 PSI
80 PSI36.72933
29.51749
15.25387
3.7595
25.76654
3.7595
16.22412
4.25108
SUCTION PORT3" ANSI STYLE FLANGE (150#)
DISCHARGE PORT3" ANSI STYLE FLANGE (150#)
R 28
NEW
WWW.BLAGDONPUMP.COM 33
AP50AP50SUBMERSIBLE CENTRIFUGAL PUMP
Performance Curve
• • Submersible• • Designed for underground use• • High intensity spark free• • Robust construction• • Modular construction, easy to maintain• • Spring loaded vanes for immediate start up• • Pumps solid particles up to 6mm• • Viton seal options for higher temperatures• • Integral baseplate/strainer• • Automatic overspeed control• • Integral oil reservoir - automatic lubrication
INDUSTRIES• • Mining• • Construction• • De-watering• • Sewage• • Well-pointing
Technical Data
SUBMERSIBLE CENTRIFUGAL PUMP
Maximum Delivery: 560 ltrs/min (148 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): N/ASuction Lift (Wet): N/AFluid Inlet/Outlet: 2” BSP / NPTInstallation: N/AAccessories Included: None
Shipping Weight:Cast Iron 33 kg. (72.8 lbs.)
Shipping Dimensions: 500 x 380 x 260 mm. (19.7” x 15” x 10.2”)
162
458
41
11
147
FLUIDOUTLET2” BSPT(F)
AIREXHAUST1” BSP(F)AIR INLET
3/4” BSP(M)
Ø 197 RIBBEDPUMP INLET
Ø 406 (16”) MINIMUMBOREHOLE DIAMETER
10
20
30
40
FLUID FLOW RATE
ME
TRE
S H
EA
D
PS
I HE
AD
FEE
T H
EA
D
50
7 B r2. a( 40 psi)
.a
1 4 B r AIR PRESSURE
s(20 p i)
4 r.1 Ba6
)( 0 psi
5.5 Bar (80 psi)
6.9 Bar(10
s0 p
i)
370 M /hr(41.2 CFM)
35 M /hr(20.6 CFM)
3
100 M /hr AIR CONSUMPTION(58.9 CFM)
3
35
30
120
25
100
20
80
15
60
10
40
520
0 0
20
50 100 150 200 250 300 350 400 450 500 550 600 - L/MIN
40 60 80 100 120 130 - UK GPM
Dimensions
Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.
PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS34
PUMP ACCESSORIES
• • Virtually pulsation free fl ows• • Steadier pressures• • Less vibration and noise• • Simple installation• • Variety of sizes and materials• • Automatically self changing
Pulsation Dampener
• • Batch Control• • Linkage to control equipment• • Greater process control• • 10 - 30v DC, PNPnormally open
Valve Block with Sensors• • Exclusive to Blagdon Pump• • Robust heavy duty design• • Suitable for arduousinstallations• • Safe for underground use - no aluminium
Oil Bottle Assembly
• • Maintains constant oil density with varying fl ow• • Remote installation for ease of maintenance• • Ensures clean, fi ltered air• • Can be controlled independently of other equiptment
• • Upgrade B75 and X75 pumps to AirVantage• • Simply install a complete air section kit
Filter Regulators
Center Section
Flanges• • ANSI 150 as standardalso available: • ANSI 300 • PN16 • Food Industry - RJT,DIN, TRI-CLAMP• • Ease of connections topipework systems
n
d
oo
o
cP
ol
controlP
tion free fl owss
as
suresand noise
ations
NEW
WWW.BLAGDONPUMP.COM 35
WWW.BLAGDONPUMP.COM
The purpose of our website is to have as much information as possible available to our customers.
Also shown within the web pages are:
• • Chemical Resistance Charts• • Kit Revisions• • Index with Components and Drawings• • Viscosity Correction Curve• • Flow Rate Conversion Calculator• • Shipping Weights and Dimensions• • Blagdon Numbering System
Product LiteratureProduct specifi c literature is available which includes:• • Technical data• • Performance Curves• • Applicable industries/applications• • Available options
Visit Our Website Today
BLAGDON PUMPR79 Shannon Industrial Estate, Shannon, Co. Clare, Ireland
Phone: +353 (0) 61 471933 • Fax: +353 (0) 61 475046sales.blagdonpump@idexcorp.com
www.blagdonpump.com
www.blagdonpump.com
bpprodbr-rev0312 © 2012 BLAGDON PUMP, All rights reserved.
IDEX Mexico Ejército Nacional #404-801Col. Chapultepec Morales,
C.P. 11570, México, D.F.Phone: +52 55 5255 1357
Fax: +52 55 52551356raguilar@idexcorp.com
www.idexcorp.com
IDEX de BrazilMunicipal dos Andradas Road – Building 8
Valinhos – São Paulo – BrazilPhone: +55 19 3871-3500
Fax: +55 19 3871-6400ftorres@idexcorp.com
www.idexcorp.com
LATIN AMERICA COMMERCIAL OPERATIONS
IDEX Asia Pacifi c Pte Ltd63 Hillview Avenue, #07-08,
Lam Soon Industrial Building, Singapore 669569Phone: +65-63146146Fax: +65-6764 4020
mlim@idexcorp.comwww.idexcorp.com
ASEAN COMMERCIAL OPERATIONS
IDEX Trading (SHANGHAI) CO., LTD.Room 3502-3505, Zhao Feng Plaza,
1027 Chang Ning Road, Shanghai 200050, ChinaPhone: +86-21-52415599
Fax: +86-21-52418339jzhao@idexcorp.comwww.idexcorp.com
EAST ASIA COMMERCIAL OPERATIONS
IDEX India Pvt LtdSunteck Centre, 3rd fl oor, 37-40 Subhash Road
Vile Parle East, Mumbai-400 057, IndiaPhone: +91-22-6643 5500
Fax: +91-22-6678 0055rgupta@idexcorp.com
www.idexcorp.com
WEST ASIA COMMERCIAL OPERATIONS
Warren Rupp, Inc.800 North Main StreetMansfi eld, Ohio 44901Phone: 419-524-8388
Fax: 419-522-7867Appeng.warrenrupp@idexcorp.com
www.warrenrupp.com
NORTH AMERICACOMMERCIAL OPERATIONS
Viking Pump of Canada, Inc.661 Grove AvenueWindsor, OntarioN9A 6M3, Canada
www.vikingpumpcanada.com
Local Distributor
Distributors located globally – for channel partners please visit: