Post on 05-Sep-2018
PROGRAM
TUESDAY 26TH
ESAFORM PRE-COURSES ECOLE CENTRALE DE NANTES (SEE ACCESS MAP IN THE NEXT PAGE)
9 :00 – 12 :00 Advanced Model Order Reduction and application in material forming
9:00 – 10 :00 Introduction to PGD, Amine Ammar.. 10:00 – 11:00 Coding PGD: the Poisson’s equation, Jose-‐Vicente Aguado. 11:00 – 12:00 Applications, Elias Cueto & Amine Amar.
12 :00 – 13 :00 LUNCH
13 :00 – 17 :30 Flows in polymers, reinforced polymers and composites
13:00 – 14:00 Composite reinforcements and continuous fiber pre-preg forming process simulations, Philippe Boisse. 14:00 – 15:00 Multiscale modelling of polymer flows, Roland Keunings. 15:30 – 16:30 Complex flows of micro/nano structured fluids: reinforced polymer composites, Emmanuelle Abisset-‐Chavanne. 16:30 – 17:30 Flows of simple and complex fluids in microstructures: reactive processing and novel composite materials, Christophe Binetruy.
SHORT COURSES LOCATION
ECOLE CENTRALE DE NANTES 1 RUE LA NOE, 44300 NANTES
TRAM LINE 2, STOP AT ECOLE CENTRALE ROOM B8 AND B9
A
B
E
F
GHJLN
PRACTICAL INFORMATION
Niveau 0 : INFIRMARY: 02 40 37 25 20 HALL A LUNCH ROOM
Niveaux 1 : AMPHI B8 & B9 Laboratoire de Mécanique des Fluides (UMR 6598) • Équipe Hydrodynamique et Génie Océanique • Équipe Modélisation numérique GeM - Institut de Génie Civil et Mécanique (UMR 6183) • Pôle Matériaux et procédés de fabrication Laboratoire de Mathématiques Jean Leray (UMR 6629) - Équipe du CERMA GeM - Institut de Génie Civil et Mécanique (UMR 6183) • Pôle Structures et Couplage • Pôle Matériaux poreux, interactions, ouvrages
Laboratoire de Mécanique des Fluides (UMR 6598) Hall d’essais en hydrodynamique : bassin des carènes - bassin de houle Laboratoire de Mécanique des Fluides (UMR 6598) • Équipe Énergétique des Moteurs à Combustion Interne - Banc d'essais moteurs GeM - Institut de Génie Civil et Mécanique (UMR 6183) - Hall d'essais
Laboratoire de Mécanique des Fluides (UMR 6598) • Équipe Dynamique de l'Atmosphère Habitée • Équipe Énergétique des Moteurs à Combustion Interne GeM - Institut de Génie Civil et Mécanique (UMR 6183) • Centre de Ressource en Essais Dynamiques Institut de Recherche en Communication et Cybernétique de Nantes IRCCyN (UMR 6597)
Ecole Centrale de NANTES, 1 rue de la Noê, BP 92101, 44321, NANTES cedex 03 Tél standard : 02 40 37 16 00 TéL 02 40 37 25 08 06 77 62 67 38 Emergency SAMU (Urgences médicales) : 15 Police secours : 17 Pompiers secours : 18 Appel d’urgence Européen : 112 Pharmacie de garde, contacter le commissariat : 02 40 37 21 21 SOS médecins : 02 40 50 30 30
Transportation Aéoroport de Nantes-Atlantique : 02 40 84 80 00 Gare SNCF : 08 36 35 35 35 Allo Taxis Nantes-Atlantique : 02 40 69 22 22 Allo 44 Taxis : 06 09 82 31 31 ou 06 09 82 38 38
PATH TO REGISTRATION and SESSION
D
O
A L
Rond-point de la Noë Tramway ligne 2
L'ERDRE
ROUTE DE LA JONELIÈRE
H
I
F
E
J
DA
B
C
L
G
S
IM3
IM3b
P
N
ORésidence
Max Schmitt 1
RésidenceMax Schmitt 2
RUE DE
LA N
OE
CHEMIN
DE
L'ILE
D'Y
EU
S
STOP: Ecole Centrale-Audencia
T
ESAFORM 2016
ESAFORM 2016
ESAFORM 2016
ESAFORM 2016
ESAFORM 2016
ESAFORM 2016
PARKING ESAFORM 2016
LIGNE 2: Direction Orvault
WIFI : ESAFORM, PASWORD : ESAFORM
TUESDAY 26TH
16:00 – 18 :00 Registration @ Mezzanine
WEDNESDAY 27TH 7:00 – 8 :00 Registration at Mezzanine 8:00 – 8 :30 Room 450: WELCOME CEREMONY
8:30 – 9:20 Room 450 Plenary: Ram Upadhyay (GE, USA)
Polymer matrix composite applications in aerospace industry – Real time decisions by real time modeling.
9 :30 – 12 :30 PARALLEL SESSIONS Room 450 Composites Forming Processes Chairman: Ph. Boisse 9:30 – 9:50 Paper number: 95 Title: Layup and Process Dependent Wrinkling Behavior of PPS/CF UD tape-‐laminates during Non-‐Isothermal Press Forming Into a Complex Component. Authors: Tobias Joppich, Dominick Doerr, Leonie Van der Meulen, Tobias Link, Benjamin Hangs and Frank Henning. 9:50 – 10:10 Paper number: 16 Title: 3D Modeling of Squeeze Flow of Unidirectionally Thermoplastic Composite Inserts. Authors: Chady Ghnatios, Emmanuelle Abisset-‐Chavanne, Christophe Binetruy, Francisco Chinesta and Suresh Advani 10:10 – 10:30 Paper number: 23 Title: Viscous and Thermal modelling of thermoplastic composites forming process. Authors: Eduardo Guzman, Biao Liang, Nahiene Hamila and Philipe Boisse. 10:30 – 10:50 Paper number: 24 Title: On the Modeling of Separation Foils in Thermoforming Simulations. Authors: Alexane Margossian, Sylvain Bel and Roland Hinterhölzl. Room 200 Formability of Metallic Materials Chairman: T. Kuwabara 9:30 – 9:50 Paper number: 29 Title: Enlargement of Measurable Strain Range in Biaxial Cruciform Test. Authors: Akinobu Ishiwatari, Satoshi Sumikawa, Jiro Hiramoto, Yasushi Kitani and Toshihiro Kuwabara 9:50 – 10:10 Paper number: 36 Title: Analytical methodology for the determination of the flow curves of aluminium and steel alloys using the hydraulic bulge test. Authors: Hazam Alharti, Sumit Hazra, Dorel Banabic and Richard Dashwood
10:10 – 10:30 Paper number: 214 Title: Tensite Test of Dumbell-‐Shaped Specimen in Thickness Direction. Authors: Takashi Lizuka 10:30 – 10:50 Paper number: 34 Title: Variation of Apparent Mechanical Anisotropy of Cold-‐formed Embossed nSheet by Annealing. Authors: Wuyang Liu and Takashi Lizuka Room CH : Integrated design, modelling and reliability assesment in forming Chairman: S. Thuillier 9:30 – 9:50 Paper number: 37 Title: Thermo-‐chemical, Mechanical and Resin Flow Integrated Analysis in Pultrusion. Authors: Pierpaolo Carlone, Felice Rubino and Gaetano Salvatore Palazzo. 9:50 – 10:10 Paper number: 39 Title: Finite Element Modeling and Analysis of Electro-‐Magnetic Pulse Welding of Aluminium Tubes to Steel Bars Authors: Ramesh Kumar, Jyoti Doley and Sachin Kore. 10:10 – 10:30 Paper number: 142 Title: Strain Rate Dependent Hardening of DP600 Sheet Metal for Large Strains Under In-‐plane Biaxial Loadings. Authors: Wei Liu, Dominique Guines, Lionel Leotoing and Eric Ragneau. 10:30 – 10:50 Paper number: 143 Title: Smart-‐GFEM for efficient welding simulation. Authors: Diego Canales, José Vicente Aguado, Francisco Chinesta, Elías Cueto, Yannick Vincent and Frederic Boitout. Room I : Machining and Cutting Chairman: P. Arrazola 9:30 – 9:50 Paper number: 94 Title: Iterative Lagrangian Model of Broaching to Study Cutting Forces, Temperatures and Chip Formation. Authors: Dorian Fabre, Cedric Bonnet, Joel Rech and Tarek Mabrouki. 9:50 – 10:10 Paper number: 265 Title: A New Behavior Model for Better Understanding of Titanium alloys Ti-‐6Al-‐4V Chip Formation in Orthogonal Cutting Authors: Mahmoud Harzallah, Thomas Pottier, Johanna Senatore, Michel Mousseigne, Guenael Germain and Yann Landon. 10:10 – 10:30 Paper number: 173 Title: 2D Finite Element Model and Microstructural Changes During Cutting of Ti6Al4V in dry Condition. Authors: Stano Imbrogno, Sergio Rinaldi, Borja Seara, Pedro Arrazola, Giovanna Rotella and Domenico Umbrello.
10:30 – 10:50 Paper number: 103 Title: Temperature Analysis in CFRP Drilling. Authors: Takashi Matsumura and Shoichi Tamura. Room KL : Forging and Rolling Chairman: N. Grbic 9:30 -‐9:50 Paper number: 13 Title: Defining a Method of Evaluating Die Life Performance by Using Finite Element Models (FEM) and a Practical Open Die Hot Forging Method. Authors: J.Marashi, J.Foster, R.Zante 9:50 – 10:10 Paper number: 60 Title: Methodology for the analysis of the impact of the forging parameters on metallurgy and mechanical properties in case of solid electromagnetic manufactured parts. Authors: M.Borsenberger, C.Baudouin, A.Benabou, R.Bigot,P.Faverolle, J.C.Mipo. 10:10 – 10:30 Paper number: 62 Title: Development of Strategies for Saving Energy by Temperature Reduction in Warm Forging processes. Authors: S.Varela, M.Santos, L.Vadillo, Z.Idoyaga, O.Valbuena 10:30 – 10:50 Paper number: 109 Title: Idle and Axial roll speed law trend effect in an industrial Ring Rolling process. Authors: L.Giorleo, E.Ceretti, C.Giardini Room J : Additive Manufacturing Chairman: J.Y. Hascoet 9:30 – 9:50 Paper number: 41 Title: 3D construction and Repair from welding and Material Science Perspectives Authors: Surendar Marya and Yves Hascoet 9:50 – 10:10 Paper number: 156 Title: Microstructural and micromechanical study of a Ti6Al4V component made by Electron Beam Melting Authors: F.Scherillo, S.Franchitti, R.Borrelli, C.Pirozzi, A.Squillace, A.Langella and L.Carrino 10:10 – 10:30 Paper number: 198 Title: Effect of HIPping (Hot Isostatic Pressing) on Electron Beam Melting Ti6Al4V parts after machining Authors: A.Dolimont, S.Michotte, E.Rvière-‐Lorphèvre, F.Docobu, C. De Formanoir, S.Godet and E.Filippi 10:30 – 10:50 Paper number: 53 Title: Numerical simulation of complex part manufactured by Selective Laser Melting process Authors: Laurent Van Belle and Julien Bajolet
Room M : IncrementaL and Sheet Metal Forming Chairman: M. Bambach 9:30 – 9:50 Paper number: 210 Title: An Investigation into the Mechanics of Double-‐Sided Incremental Forming using Finite Element Methods Authors: Newell Moser, Zixuan Zhang, Huaqing Ren, Kornel Ehmann and Jian Cao 9:50 – 10:10 Paper number: 84 Title: Multiple forming tools in incremental forming -‐ Influence of forming strategies on the sheet contour Authors: Thai Dang, Lennart Manfred Tebaay, Soeren Gies and A. Erman Tekkaya 10:10 – 10:30 Paper number: 49 Title: Influence Of Part Orientation On The Geometric Accuracy In Robot-‐Based Incremental Sheet Metal Forming Authors: Denis Daniel Störkle, Patrick Seim, Lars Thyssen and Bernd Kuhlenkötter 10:30 – 10:50 Paper number: 167 Title: Thermomechanical simulations and experimental validation for High Speed Incremental Forming Authors: Giuseppina Ambrogio, Francesco Gagliardci, Luigino Filice and Natalia Romero
10 :50 – 11 :10 COFFEE BREAK
Room 450 : Composites Forming Processes Chairman: R. Akkerman 11:10 – 11:30 Paper number: 28 Title: Prediction of tensile and flexural strength of unidirectional CFRP considering the interfacial shear strength. Authors: Wojin Na, Geunsung Lee, Minchang Sung and Woong-‐Ryeol Yu. 11:30 – 11:50 Paper number: 87 Title: A method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature. Authors: Dominik Dörr, Tobias Joppich, Fabian Schirmaier,Tobias Mosthaf, Luise Kärger and Frank Henning. 11:50 – 12:10 Paper number: 128 Title: Global and local observations of 3D warp interlock interlock fabric behaviour during forming process. Authors: Clement Dufour, Ivona Jerkovic, Fraçois Boussu, Peng Wang, Damien Soulat, Ana Maria Grancaric, Vladam Koncar, Philippe Pineau. 12:10 – 12:30 Paper number: 188 Title: Fibre Mapping analysis in composite forming: experimental and numerical comparison. Authors: J.Colmars, A.Rusanov and P.Boisse
Room 200 : Formability of Metallic Materials Chairman: D. Banabic 11:10 – 11:30 Paper number: 139 Title: Research on Deformation of 7050 Aluminium Alloy Panels with Stiffeners by Pre-‐stress Shot Peen Forming Authors: Mingtao Wang, Yuasong Zeng, Xia Huang and Fenggong Lu. 11:30 – 11:50 Paper number: 193 Title: Effect of the Zener-‐Hollomon parameter on the formability of AA 6082-‐T6 formed at elevated temperature. Authors: Michelle Novella, Andrea Ghiotti and Stefania Bruschi. 11:50 – 12:10 Paper number: 231 Title: Natural Aging Effect on the Forming Behaviour iof a Cylindrical Cup whith an Al-‐Mg-‐Si Alloy. Authors: Vasco Simões, Hervé Laurent, Marta Oliveira and Luis Menezes. 12:10 – 12:30 Paper number: 44 Title: Microstructure Evolution in Hot Rolled Al 7075 via Friction Stir Processing. Authors: Ming-‐Jen Tai, Mei Ling Guo, Feng Chao Liu, Xu Song and Beng Room CH : Integrated design, modelling and reliability assesment in forming Chairman: P. Carlone 11:10 – 11:30 Paper number: 38 Title: Hard and Soft Computing Models of Composite Curing Process Looking Toward Monitoring and Control. Authors: Felice Rubino, Pierpaolo Carlone, Dragan Aleksendrić, Velimir Ćirović, Luca Sorrentino and Costanzo Bellini. 11:30 – 11:50 Paper number: 146 Title: SPIF of Brass Alloys: Preliminary Studies Authors: Ricardo Alves De Sousa, Daniel Fritzen and Lirio Schaeffer. 11:50 – 12:10 Paper number: 149 Title: Anisotropic Mechanical Behavior of an Injection Molded Short Fiber Reinforced Thermoplastic. Authors: Delphine Lopez, Sandrine Thuillier, Nicolas Bessières and Yves Grohens. 12:10 – 12:30 Paper number: 161 Title: Thermal Modeling of Cogging Process Using Finite Element Method. Authors: Mohamad Ramadan, Mahmoud Khaled and Lionel Fourment. Room I : Machining and Cutting Chairman: T. Matsumura 11:10 – 11:30 Paper number: 148 Title: Investigation of the chip formation of Austempered Grey Iron. Authors: Sven Lung, Fritz Klocke, Benjamin Döbbeler and Edgar Krick.
11:30 – 11:50 Paper number: 126 Title: High productivity machining of holes in Inconel 718 by use of SiAlON tools. Authors: Aitor Arruti, Jose Angel Pelegay, Klaus Bonde and Pedro Jose Arrazola. 11:50 – 12:10 Paper number: 228 Title: Investigation on process parameters affecting blanking of AISI 1006 low carbon steel. Authors: Antonello D'Annibale, Mohamad El Mehtedi, Lorenzo Panaccio, Antoniomaria Di Ilio and Filippo Gabrielli. Room KL : Forging and Rolling Chairman: A. Chugreev 11:10 – 11:30 Paper number: 141 Title: Analytic temperature evaluation and process forces estimation for the RARR process of flat rings Authors: L.Quagliato, G.Berti 11:30 – 11:50 Paper number: 169 Title: Investigation of Influencing Factors on Friction during Ring Test in Hot Forging Using FEM Simulation Authors: R.Sethy, L.Galdos, J.Mendiguren, E.S. de Argandona 11:50 – 12:10 Paper number: 196 Title: Influence of Die Geometry and Material Selection on the Behavior of Protective Die Covers in Closed-‐die Forging Authors: Y.Yu, D.Rosenstock, M.Wolfgarten, G.Hirt 11:10 – 11:30 Paper number: 204 Title: Experimentation and Numerical Modeling of Forging Induced Bending (FIB) Process Authors: S.Naseem, T.van den Boogaard Room J : Additive Manufacturing Chairman: J.V. Aguado 11:10 – 11:30 Paper number: 72 Title: Development of a Direct Feed Fused Deposition Modelling Technology for Multi-‐Material Manufacturing. Authors: Zuoxin Zhou, Iulia Salaoru, Peter Morris and Gregory J.Gibbons 11:30 – 11:50 Paper number: 249 Title: Research Into Material Behavior Of The Polymeric Samples Obtained After 3D-‐Printing And Subjected To Compression Test. Authors: Mikhail A. Petrov, Nikolay V.Kosatchyov and Pavel Petrov 11:50 – 12:10 Paper number: 232 Title: Influence of Melt Mixer on Injection Molding of Thermoset Elastomers Authors: Arif Rochman and Keith Zahra 12:10 – 12:30 Paper number: 113 Title: Modelling of the polymer flow under the compaction roller in the automated fiber placement process and induced properties Authors: G.Dolo, D.Caelié, F.Challois, P.Joyot, J.Férec, G.Ausias
Room M : Incremental and Sheet Metal Frorming Chairman: J. Duflou 11:10 – 11:30 Paper number: 83 Title: On The Increase Of Geometric Accuracy With The Help Of Stiffening Elements For Robot-‐Based Incremental Sheet Metal Forming Authors: Lars Thyssen, Patrick Seim, Denis Daniel Störkle and Bernd Kuhlenkötter 11:30 – 11:50 Paper number: 85 Title: Adaptive Scallop Height Tool Path Generation For Robot-‐Based Incremental Sheet Metal Forming Authors: Patrick Seim, Dennis Möllensiep, Denis Daniel Störkle, Lars Thyssen and Bernd Kuhlenkötter 11:50 – 12:10 Paper number: 50 Title: Comparison of Manufacturing of Lightweight Corrugated Sheet Sandwiches by Hydroforming and Incremental Sheet Forming Authors: Fawad Maqbool, Lars Elze, Holger Seidlitz and Markus Bambach 12:10 – 12:30 Paper number: 154 Title: Investigations on Structural Thinning in Deformation Machining Stretching Mode Authors: Arshpreet Singh, Harish Nirala and Anupam Agraw
12 :30 – 14 :00 LUNCH
14:00-14:50 Room 450 Plenary: R. Keunings (UCL, Belgium)
New developments in the multiscale modelling of the flow-‐induced microstructure in fibre suspensions
15 :00 – 18 :20 PARALLEL SESSIONS Room 450 : Composites Forming Process Chairman: S. Lomov 15:00 – 15:20 Paper number: 133 Title: Integration of Heat Transfer Effects in Simulation of Composite Stamping. Authors: Duc Ann Hdang, Arthur Levy, and Steven Le Core. 15:20 – 15:40 Paper number: 194 Title: Forming of carbon fiber reinforced thermoplastic composite tubes-‐experimental and numerical approaches. Authors: Bernhard Maron, Christian Garthaus, Florian Lenz, Andreas Horning, Michael Hübner and Maik Gude.
15:40 – 16:00 Paper number: 166 Title: Modeling the Evolution of Thermal Contact Resistance between Two Thermoplastic Pre-‐impregnated Tapes Considering the Real Surface. Authors: Angel Leon, Anais Barasinski and Francisco Chinesta 16:00 – 16:20 Paper number: 202 Title: Automotive View on Forming of Continuous Fiber Reinforced Composites and its Simulation. Authors: Benedickt Eck and Guillaume Chambon Room 200 : Formability of Metallic Materials Chairman: A. Ofenheimer 15:00 – 15:20 Paper number: 208 Title: Novel Spraying Apparatus to Investigate the Lubricant Deposition on Metal Sheets at High Temperarure. Authors: Francesco Medea, Andrea Ghiotti, Stefania Bruschi and Marco Bellin. 15:20 – 15:40 Paper number: 42 Title: Effect of Severe Plastic Deformation on Microstructure of Squeeze-‐cast Magnesium Alloy AZ31 Plate. Authors: Kai Soon Fong, Ming Jen Tan, Danno Atsushi, Beng Wah Chua and Meng Kwong. 15:40 – 16:00 Paper number: 153 Title: Effect of the production technology of bolts from Ti-‐Al-‐Mo-‐V alloy on the heterogeneity of their texture and susceptibility to the fracture. Authors: Yuriy Perlovich, Olga Krymskaya, Margarita Isaenkova and Vladimir Fesenko. 16:00 – 16:20 Paper number: 152 Title: Development of an Innovative Method to Predict and to Characterize the Performances of Ti-‐6Al-‐4V LBW joints. Authors: Antonio Squillace, Mariacira Liberini, Barbara Previtali and Kambitz Room CH : Integrated design, modelling and reliability assesment in forming Chairman: R. Valente 15:00 -‐15:20 Paper number: 162 Title: Parallelization of Fine-‐Scale Computation in Agile Multiscale Modelling Methodology Authors: Piotr Macioł and Kazimierz Michalik. 15:20 – 15:40 Paper number: 191 Title: The Effect of Tooling Deformation on Process Control in Multistage Metal Forming Authors: Joos Havinga and Ton van den Boogaard. 15:40 – 16:00 Paper number: 215 Title: Metamodelling with Artificial Neural Networks by using High Performance Computing infrastructures. Authors: Lukasz Rauch, Grzegorz Gorecki, Maciej Pietrzyk and Piotr Macioł
16:00 – 16:20 Paper number: 224 Title: Two-‐scale modeling of joining of the aluminum alloys by a cohesive zone element technique. Authors: Yinan Zuo, Stefanie Reese and Stephan Wulfinghoff. Room I : Non-Conventional Processes Chairman: L. Slatneanu 15:00 – 15:20 Paper number: 117 Title: Numerical Simulation of Electrified Jets: An Application to Electrospinning Authors: Domenico Borzacchiello, Simona Vermiglio, Francisco Chinesta, Khalid Lafdi and Saja Nabat. 15:20 – 15:40 Paper number: 9 Title: Experimental Investigation of Surface Roughness in Electrical Discharge Turning Process information on submission. Authors: Vikas Gohil and Y M Puri. 15:40 – 16:00 Paper number: 55 Title: Field Assisted Hot Pressing of sintering Inconel 718 MIM samples. Authors: Olivier Dugauguez, Thierry Barriere, Jean-‐Claude Gelin and Josemanuel Torralba. 16:00 – 16:20 Paper number: 163 Title: Press hardening of alternative high strength aluminium and ultra-‐high strength steels. Authors: Joseba Mendiguren, Rafael Ortubay, Xabier Agirretxe, Lander Galdos and Eneko Saenz de Argandoña. Room KL : Forging and Rolling Chairman: T. Matthias 15:00 – 15:20 Paper number: 235 Title: On the Importance of Accurate Material Data for Modeling and Simulation of Forming Processes Authors: S.Reichelt, K.Neh, M.Helbig, M.Ullmann 15:20 – 15:40 Paper number: 254 Title: Realistic Modelling of the Tool Kinematics of Radial-‐Axial Ring Rolling Machines in Finite Element Simulation Authors: G.schwich, V.Jenkouk, G.Hirt 15:40 – 16:00 Paper number: 79 Title: Application of Multi-‐Grid Method on the Simulation of Incremental Forging Processes Authors: M.Ramadan, M.Khaled, L.Fourment 16:00 – 16:20 Paper number: 119 Title: Experimental Study Of The Portevin-‐Le Chatelier Effect In AA 5754 sheets: influence of the different rolling routes Authors: A.Astarita, M.Liberini, C.Velotti, C.Sinagra, A.Squillace
Room J : Additive Manufacturing Chairman: J.Y. Hascoet 15:00 – 15:20 Paper number: 15 Title: Reducing the stair step effect of layer manufactured surfaces by ball burnishing Authors: Lars Hiegemann, Chiranshu Agarwal, Christian Weddeling and A.Erman Tekkaya 15:20 – 15:40 Paper number: 4 Title: Compressive Deformation Behavior of Aluminum Foam Filled Surface Pores with Polyamide by Selective Laser Melting Authors: Ryo Matsumoto, Shigehiro Kanatani, and Hirosi Utsunomiya 15:40 – 16:00 Paper number: 18 Title: Treatment of Brodie’s Syndrome using Parasymphyseal Distraction Through Virtual Surgical Planning and RP Assisted Customized Surgical Osteotomy Guide-‐ A Mock Surgery Report. Authors: Sandeep Dahake, Abhaykumar Kuthe and Mahesh Mawale 16:00 – 16:20 Paper number: 6 Title: Plasticized Protein For 3D Printing By Fused Deposition Modeling. Authors: Laurent Chaunier, Eric leroy, Guy Della Valle and Denis Lourdin Room M : Incremental and Sheet Metal Frorming Chairman: G. Ambrogio 15:00 – 15:20 Paper number: 58 Title: Simulation of Sheet-‐Bulk Metal Forming Processes with Simufact.forming using User-‐Subroutines Authors: Steffen Beese, Florian Beyer, Heribert Blum, Kerim Isik, Dustin Kumor, Stefan Löhnert, Andreas Rademacher, A. Erman Tekkaya, Kai Willner, Peter Wriggers and Sebastian Zeller 15:20 – 15:40 Paper number: 82 Title: On the Use of Solid‒Shell Elements for Thin Structures: Application to Impact and Sheet Metal Forming Simulations Authors: Peng Wang, Hocine Chalal and Farid Abed-‐Meraim 15:40 – 16:00 Paper number: 110 Title: Face Split Interpretations in Sheet Metal Design Authors: Vitalii Vorkov, Reginald Dewil, Jef Mannaerts, Dirk Vandepitte and Joost Duflou 16:00 – 16:20 Paper number: 78 Title: Spring-‐back Sensitivity Analysis of Automotive Parts According to the Material Parameters Authors: Gihyun Bae and Youngho Seo
16 :20 – 16 :40 COFFEE BREAK
Room 450 : Composites Forming Processes Chairman: J. Sherwood 16:40 – 17:00 Paper number: 218 Title: Advanced 3D Textiles Composites Reinforcements Meso F.E Analyses Based On X-‐ray Computed Tomography. Authors: Naim Naouar, Emmanuelle Vidal-‐Sallé and Philippe Boisse 17 :00 – 17:20 Paper number: 45 Title: An Anisotropic Constitutive Model with Biaxial-‐tension Coupling for Woven Composite Reinforcements. Authors: Yuan Yao, Xiaoshuang Huang, Xiongqi Peng, Youkun Gong 17:20 – 17:40 Paper number: 226 Title: An Integrated Computational Materials Engineering Method for Woven Carbon Fiber Composites Preforming Process. Authors: Weizhao Zhang, Huaqing Ren, Zequn Wang, Wing K. Liu, Wei Chen, Danielle Zeng, Xuming Su, and Jian Cao. 17:40 – 18:00 Paper number: 248 Title: Formability of tufted 3-‐Dimensional composite reinforcement. Authors: Ling Shan Liu, Peng Wang, Xavier Legrand, Damien Soulat. 18:00 – 18:20 Paper number: 124 Title: Parameter Measurements of the Hypo-‐elasticity Model for Dry Composite Reinforcement. Author: D.Wang, E.Vidal-‐Sallé, N.Naouar, and P.Boisse Room 200 : Formability of Metallic Materials Chairman: F. Barlat 16:40 – 17:00 Paper number: 80 Title: Effect of the Determination Method of the Material Parameters on the Accuracy of Forming Limit Analyses for 5000 Series Aluminium Alloy. Authors: Tomoyuki Hakoyama, Toshihiko Kuwabara and Frédéric Barlat 17:00 – 17:20 Paper number: 125 Title: Assessing the Formability of Metallic Sheets by Means of Localized and Diffuse Necking Models. Authors: Dan Sorin Comsa, Lucian Lazarescu and Dorel Banabic 17:20 – 17:40 Paper number: 74 Title: The impact of hydrogen on the formability of AHSS in Nakajima tests. Authors: Qi Gao, Fei Han, Daniel Wortberg, Wolfgang Bleck and Mathias Liewald. 17:40 – 18:00 Paper number: 240 Title: Forming Limit Strains of Interstitial Free-‐lF Steel Sheet. Authors: Jose Divo Bressan, Luciano Moreira and Maria Carolina Freitas. 18:00 – 18:20 Paper number: 230 Title: Damage and Fractura loci for a dual-‐phase steel and a high-‐strength low-‐alloyed steel: revealing the different plastic localization-‐damege-‐ductile fracture pattern. Authors: Junhe Lian, Sebastian Münstermann and Wolfgang Bleck.
Room CH : Integrated design, modelling and reliability assesment in forming Chairman: R. Sousa 16:40 – 17:00 Paper number: 266 Title: On the Model Order Reduction of Confined Plasticity Authors: Mohamed Aziz Nasri, Amine Ammar and Francisco Chinesta. 17:00 – 17:20 Paper number: 229 Title: Simulations of Joule Effect Heating in a Bulge Test Authors: Nathan Demazel, Hervé Laurent, Muriel Carin, Philippe Le Masson, Jérémy Coër, Jérôme Favero, Romain Canivenc and Stéphane Graveleau. 17:20 – 17:40 Paper number : 247 Title: Testing Single Point Incremental Forming Molds For Thermoforming Operations Authors : Daniel Afonso, Ricardo Alves De Sousa and Ricardo Torcato. 17:40 – 18:00 Paper number: 234 Title: Prediction of the Bending Behavior after Pre-‐strain of an Aluminum Alloy Authors: Adrien Pradeau, Sandrine Thuillier and Jeong Whan Yoon. 18:00 – 18:20 Paper number: 205 Title: Numerical Simulation of Friction Stir Welding (FSW): Prediction of the Heat Affected Zone Using a Softening Model Authors: Rui Paulo, Robertt Valente, Pierpaolo Carlone, Filipe Teixeira-‐Dias and G. S. Palazzo. Room I : Non-Convencional Processes Chairman: L. Santo 16:40 – 17:00 Paper number: 223 Title: Influence of Some Operating Parameters on the Kerf Size in Plasma Beam Cutting. Authors: Oana Dodun, Sanda Ilii Bangu, Laurentiu Slatineanu, Vasile Merticaru, Margareta Coteata and Irina Besliu. 17:00 – 17:20 Paper number: 160 Title: Layered Steel Materials for the Manufacture of Self-‐Sharpening Cutting Blades Authors: Tim Rostek and Werner Homberg 17:20 – 17:40 Paper number: 10 Title: Direct molding of pavement tiles made of ground tire rubber. Authors: Fabrizio Quadrini, Donatella Gagliardi, Giovanni Matteo Tedde, Loredana Santo and Ettore Musacchi. 17:40 – 18:00 Paper number: 182 Title: Delamination On GFRP Laminates Impacted at Room and Lower Temperatures: Comparison Between Epoxy and Vinylester Resins. Authors: Valentina Lopresto, Antonio Langella and Ilaria Papa. 18:00 – 18:20 Paper number: 158 Title: Shape recovery of PET foams after cold compression. Authors: Loredana Santo, Denise Bellisario and Fabrizio Quadrini.
Room KL : Forging and Rolling Chairman: H. Hagenah 16:40 – 17:00 Paper number: 175 Title: Advanced Finite Element Analysis of Die Wear in Sheet-‐Bulk Metal Forming Processes Authors: A.Chugreev 17:00 – 17:20 Paper number: 200 Title: Experimental Investigations on the State of the Friction Welded Joint Zone in Steel Hybrid Components after Process-‐Relevant Thermo-‐Mechanical Loadings Authors: T.Mathias 17:20 – 17:40 Paper number: 225 Title: Research Into Oil-‐based High-‐dispersion Graphite Lubricants For Extrusion of Ni-‐based Alloys Authors: A.Petrov, M.Petrov, P.Petrov 17:40 – 18:00 Paper number: 220 Title: Tailoring of mechanical properties of a side sill part made of martensitic stainless steel by press hardening Authors: E.M.Garcia, A.Rautenstrauch, V.Kräusel, D.Landgrebe Room J : Innovative Joining by Forming Technologies Chairman: L. Fratini 16:40 – 17:00 Paper number: 8 Title: Influence of FSW pin tool geometry on plastic flow of AA7075 T651 Authors: Enrico Lertora, Chiara Mandolfino, Carla Gambaro 17:00 – 17:20 Paper number: 32 Title: Neutral Polypropylene Laser Welding Authors: Chiara Mandolfino, Enrico Lertota, Carla Gambaro 17:20 – 17:40 Paper number: 46 Title: Fundamental Studies on a Novel Die Concept for Round-‐Point Shear-‐Clinching. Authors: Réjane Hörhold, Martin Müller, Marion Merklein, Gerson Meschut 17:40 – 18:00 Paper number: 51 Title: Experimental Comparison of the MIG, Friction Stir Welding, Cold Metal Transfer and Hybrid Laser-‐MIG Processes for AA 6005-‐T6 Aluminium Alloy. Authors: Serafina Caruso, Emanuele Sgambitterra, Sergio Rinaldi, Antonello Gallone, Lucio Viscido, Luigino Filice, Domenico Umbrello 18:00 – 18:20 Paper number: 63 Title: Dissimilar Al/steel Friction stir welding lap joints for automotive applications. Authors: D.Campanella, P.Russo Spena, G.Buffa and L.Fralini
Room M : Incremental and Sheet Metal Frorming Chairman: T. Welo 16:40 – 17:00 Paper number: 177 Title: Incremental Forming of Aluminium Alloys in Cryogenic Environment Authors: Hans Vanhove, Amirahmad Mohammadi and Joost Duflou 17:00 – 17:20 Paper number: 140 Title: Numerical and experimental analysis of cold stretching of aluminium sheets using an instrumented bench Authors: Jawhar El Gueder, Eliane Giraud and Philippe Dal Santo 17:20 – 17:40 Paper number: 145 Title: Creep Forming of an Al-‐Mg-‐Li Alloy for Aeronautic Application Authors: Wael Younes, Eliane Giraud, Montassar Fredj, Philippe Dal Santo and Sjoerd Van Der Veen 17:40 – 18:00 Paper number: Title: Using a new time depended wrinkling criterion to determinate wrinkling limit curve in FL-‐Diagram Authors: Mathias Liewald
18:20 – 19:30 COKTAIL @ Choral music
THURSDAY 28TH
8:30 – 9:20 Room 450 Plenary: F. Barlat (POSTECH, Korea)
Multiscale approach to constitutive modeling of plasticity in non proportional loading
9 :30 – 12 :30 PARALLEL SESSIONS Room 450 : Composites Forming Processes Chairman: R. Schledjewski 9:30 – 9:50 Paper number: 221 Title: Temperature Dependent Tensile and Flexural Rigidities of a Cross-‐ply Thermoplastic for a Forming Model Authors: Lisa Dangora, James Sherwood, Jason Parker, Cynthia Mitchell and Kari White 9:50 – 10:10 Paper number: 237 Title: Heat transfer and crystallization kinetics in thermoplastic composite processing. A coupled modelling framework. Authors: Arthur Levy, Steven Le Corre and Vincent Sobotka 10:10 – 10:30 Paper number: 184 Title: Intrinsic Manufacture of Hollow Thermoplastic Composite/Metal Structures Authors: Daniel Barfuss, Raik Grützner, Christian Garthaus, Maik Gude, Roland Müller and Dirk Landgrebe 10:30 – 10:50 Paper number: 56 Title: In-‐Plane Shearing of a UD Prepreg Modeled as Transversely Isotropic Fluid: Comparison Between Continuous and Discontinuous Fiber Tension Approaches Authors: Grégoire Sorba, Christophe Binetruy and Francisco Chinesta Room 200 : Formability of Metallic Materials Chairman: H. Aretz 9:30 – 9:50 Paper number: 207 Title: A procedure for specimen optimization applied to material testing in plasticity with the virtual fields method Authors: Marco Rossi, Michele Badaloni, Pascal Lava, Dimitri Debruyne and Fabrice Pierron. 9:50 – 10:10 Paper number: 209 Title: Simulation of Metal Forming Processes with a 3D Adaptive Remeshing Procedure Authors: Bessam Zeramdini, Camille Robert, Guenael Germain and Thomas Pottier. 10:10 – 10:30 Paper number: 217 Title: Post-‐processing the tube bulging test: comparison of three analytical models Authors: Ludovic Vitu, Nathalie Boudeau and Pierrick Malécot.
10:30 – 10:50 Paper Number: 68 Title: Research Directions in Hydroforming Technology. Authors: Colin Bell, Saeed Tamimi, Jonathan Corney, David Savings and Nicola Zuelli. Room CH : Energy Efficient Solutions in Material Forming Chairman: Chatti 9:30 – 9:50 Paper number: 26 Title: New Process for Flexible Manufacturing of Bent Parts with Variable Arbitrary Cross Section Authors: Christoph Becker, Goran Grzancic, Sami Chatti and A. Erman Tekkaya 9:50 – 10:10 Paper number: 99 Title: Closed-‐Loop Control Concept for Kinematic 3D-‐Profile Bending Authors: Daniel Staupendahl, Sami Chatti and A. Erman Tekkaya 10:10 -‐ 10:30 Paper number: 241 Title: Elastic Clearance Change in Axisymmetric Shearing Process Authors: Yoshinori Yoshida Room I : Machining and Cutting Chairman: D. Umbrello 9:30 – 9:50 Paper number: 192 Title: Effect of Tool Geometry and Cutting Parameters on Delamination and Thrust Forces in Drilling CFRP/Al-‐Li Authors: Souhail El Bouami, Malek Habak, Gérald Franz, Raphael Velasco and Pascal Vantomme 9:50 – 10:10 Paper number: 12 Title: Orthogonal Cutting Modeling of Hybrid CFRP/Ti toward Specific Cutting Energy and Induced Damage Analyses Authors: Jinyang Xu and Mohamed El Mansori 10:10 – 10:30 Paper number: 31 Title: An Experimental Investigation on Orthogonal Cutting of Hybrid CFRP/Ti Composite Authors: Jinyang Xu and Mohamed El Mansori 10:30 – 10:50 Paper number: 244 Title: Analysis of Residual Stress-‐Induced Distortions of Thin Sheet Structures in Multi-‐Step Milling Authors: Omar Fergani, Xiaohui Jiang and Torgeir Welo Room KL : Forging and Rolling Chairman: N. Grbic 9:30 – 9:50 Paper number: 264 Title: Hot Forging Formability of an Automotive Piston with Aluminum-‐Based Metal Matrix Composite Authors: Fuh-‐Kuo Chen
9:50 – 10:10 Paper number: 243 Title: Evaluation of Undesirable Deformations in Complex, Hollow Aluminium Extrusions due to Roll Bending Authors: Jan Magnus G. Farstad, Torgeir Welo and Øyvind Netland 10:10 – 10:30 Paper number: 189 Title: Layer Texture of Hot-‐Rolled BCC Metal Materials and Its Significance for Main Gas Pipelines Authors: Olga Krymskaya, Yuriy Perlovich and Margarita Isaenkova 10:30 – 10:50 Paper number: 86 Title: Numerical Analysis of Rheological and Tribological Behavior Influence on 16MnCr5 Forging Fibering Authors: A.Gavrus, D.Pintilie, R.Nedelcu Room J : Innovative Joining by Forming Technologies Chairman: H. Hagenah 9:30 – 9:50 Paper number: 91 Title: Calibration of 3D ALE Finite Element Model from Experiments on Friction Stir Welding of Lap Joints Authors: Lionel Fourment, Sabrina Gastebois and Laurent Dubourg 9:50 – 10:10 Paper number: 114 Title: Two Dimensional Coupled Eulerian Lagrangian (CEL) Model For Banded Structure Prediction In Friction Stir Welding With Trigonal Tool. Authors: Amèvi Tongne, Hugo Robe, Christophe Desrayaud, Mohammad Jahazi and Eric Feulvarch 10:10 – 10:30 Paper number: 123 Title: In-‐Process Tool Force and Rotation Variation to Control Sheet Thickness Change in Friction Stir Welding of Magnesium Alloys Authors: Gianluca Buffa, Livan Fratini, Michela Simoncini and Archimede Forcellese 10:30 – 10:50 Paper number: 127 Title: Friction Stir Welding – An Overview Authors: Sivaprakassam Thamizhmanii, Rasool Mohideen and Sulaiman Hasan Room M : Incremental and Sheet Metal Forming Chairman: M. Bambach 9:30 – 9:50 Paper number: 120 Title: The effect of cushion-‐ram pulsation on hot stamping Authors: Dirk Landgrebe, Anja Rautenstrauch, Andreas Kunke, Stefan Polster, Sebastian Kriechenbauer and Reinhard Mauermann 9:50 – 10:10 Paper number 112 Title: Effects of Process Variation in Short Cycle Stretch Forming in Beverage Can Production Authors: Matthias Schneider and Mathias Liewald
10:10 – 10:30 Paper number: 165 Title: Influence of the pressure dependent coefficient of friction on deep drawing springback predictions Authors: Imanol Gil, Lander Galdos, Joseba Mendiguren, Endika Mugarra and Eneko Saenz de Argandoña 10:30 – 10:50 Paper number: 111 Title: Impact of the Crack Sensitivity of Cut Edges on the Formability of Advanced High Strength Steels Authors: Martin Heuse, Daniel Staupendahl and Siddharth Upadhya R. S. S.
10 :50 – 11 :10 COFFEE BREAK Room 450 : Composites Forming Processes Chairman: R. Akkerman 11:10 – 11:30 Paper number: 150 Title: Influence of Preconsolidation on Consolidation Quality after Stamp Forming of C/PEEK Composites Authors: Tjitse K. Slange, Laurent Warnet, Wouter J.B. Grouve and Remko Akkerman 11:30 – 11:50 Paper number: 138 Title: Mechanical Analysis of Three Dimensional Woven Carbon Fiber-‐Reinforced Composites Using Fiber-‐Based Continuum Model Authors: Hyunchul Ahn, Yongsan An and Woong-‐Ryeol Yu 11:50 – 12:10 Paper number: 242 Title: Simulations of composite reinforcement forming taking into account local fiber bending stiffness Authors: Philippe Boisse, Sylvain Mathieu and Nahiene Hamila 12:10 – 12 :30 Paper number: 64 Title: Experimental investigation of braided fabric forming Authors: Peng Wang, Damien Soulat, Xavier Legrand, Lilia Zemni Room 200 : Formability of Metallic Materials Chairman: T. Kuwabara 11:10 – 11:30 Paper number: 164 Title: Influence Of Material´s Hardening Behaviour of DP1000 on Numerical Springback Prediction. Authors: Imanol Gil, Elena Silvestre, Lander Galdos, Joseba Mendiguren, Eneko Saenz de Argandoña and Eric Hug. 11:30 – 11:50 Paper number: 251 Title: The Effect of Surface Layer Properties on Bendability of Ultra-‐High Strength Steel. Authors: Anna-‐Maija Arola, Antti Kaijalainen and Vili Kes
11:50 – 12:10 Paper number: 246 Title: Springback Analysis on AA 6061 Aluminum Alloy Sheets. Authors: Janaki Ramulu Perumalla, Srinivasa Rao P and Wassihun Yimer. 12:10 – 12:30 Paper number: 22 Title: Work-‐Hardening Behavior of Commercially Pure Titanium JIS Grade 1 Sheet upon Reverse Loading. Authors: Takayuki Hama, Ning Yi, Akihiro Kobuki, Sohei Uchida, Hitoshi Fujimoto and Hirohiko Takuda. Room CH: Heat Tranfer Modelling Chairman: V. Sobotka 11:10 – 11:30 Paper number: 71 Title: Determination of Thermal Contact Conductance in Vacuum-‐Bagged Thermoplastic Prepreg Stacks Using Infrared Thermography Authors: Theo Baumard, Olivier De Almeida, Gary Menary, Yannick Le Maoult, Fabrice Schmidt and Jérôme Bikard 11:30 – 11:50 Paper number: 61 Title: Thermo-‐Kinetic Characterization and Modelling of a New Generation of SMC Composites Authors: Romain Cardinaud, Nicolas Boyard, Steven Le Corre and Mustafa Sager 11:50 -‐ 12:10 Paper number: 101 Title: Two Dimensional Finite Element Thermal Model of Laser Surface Glazing for H13 Tool Steel Authors: Israt Rumana Kabir, Danqing Yin and Sumsun Naher 12:10 – 12:30 Paper number: 239 Title: Scattering effect in radiative heat transfer during selective laser sintering of polymers Authors: Xin Liu, M'Hamed Boutaous and Shihe Xin Room I : Machining and Cutting Chairman: G. Germain 11:10 – 11:30 Paper number: 137 Title: A thermomechanical analysis of sticking-‐sliding zones at the tool-‐chip interface in dry high-‐speed machining of aluminium alloy A2024–T351: a hybrid Analytical-‐FE model Authors: Avevor Yao, Moufki Abdelhadi and Nouari Mohammed 11:30 – 11:50 Paper number: 132 Title: Experimental Analysis on Semi-‐Finishing Machining of Ti6Al4V Additively Manufactured by Direct Melting Laser Sintering Authors: Stano Imbrogno, Alberto Bordin, Stefania Bruschi and Domenico Umbrello 11:50 – 12:10 Paper number: 183 Title: Cutting performance and wear mechanisms of PVD coated carbide tools during dry drilling of newly produced ADI Authors: Anil Meena and Mohamed El Mansori
12:10 – 12:30 Paper number: 96 Title: Some cases of machining large-‐scale parts: characterization and modelling of heavy turning, deep drilling and broaching Authors: Badis Haddag, Mohammed Nouari and Abdelhadi Moufki Room KL : Constitutive Modelling Chairman: L Tabourot 11:10 – 11:30 Paper number: 88 Title: Crystal Plasticity Analysis of Constitutive Behavior of 5754 Aluminum Sheet Authors: Minh-‐Son Pham, Anthony Rollett, Adam Creuziger, Mark Iadicola and Timothy 11:30 – 11:50 Paper number: 67 Title: Modelling of the Cellular Automata Space Deformation within the RCAFE Framework Authors: Mateusz Sitko and Łukasz Madej 11:50 – 12:10 Paper number: 185 Title: On the control of the crystallographic texture in cladding tubes from Zr-‐based alloys for nuclear reactor Authors: Margarita Isaenkova, Yuriy Perlovich and Vladimir Fesenko 12:10 – 12:30 Paper number: 14 Title: Development of a dynamic recrystallization model for a β-‐solidifying titanium aluminide alloy using Kocks-‐Mecking plots Authors: Markus Bambach, Irina Sizova, Sebastian Bolz and Sabine Weiß Room J : Innovative Joining by Forming Technologies Chairman: G. Buffa 11:10 – 11:30 Paper number: 170 Title: Forming of aluminium alloy friction stir welds Authors: Carlo Bruni 11:30 – 11:50 Paper number: 171 Title: Approaches for mechanical joining of 7xxx series aluminum alloys Authors: Mathias Jäckel, Thomas Grimm and Dirk Landgrebe 11:50 – 12:10 Paper number: 178 Title: Formation of Porous Inner Architecture at the Interface of Magnetic Pulse Welded Al/Cu Joints Authors: Thaneshan Sapanathan, Rija-‐Nirina Raoelison, Kang Yang, Nicolas Buiron and Mohamed Rachik 12:10 – 12:30 Paper number: 203 Title: FEA of the Clinching Process of Short Fiber Reinforced Thermoplastic with an Aluminum Sheet using LS-‐DYNA Authors: Bernd-‐Arno Behrens, Anas Bouguecha, Milan Vucetic and Nenad Grb
Room M : Incremental and Sheet Metal Forming Chairman: J. Duflou 11:10 – 11:30 Paper number: 263 Title: On the Impact of Rolling Direction and Tool Orientation Angle in Rotary Peen Forming Authors: Markus Gottschalk and Gerhard Hirt 11:30 – 11:50 Paper number: 90 Title: High load-‐bearing multi-‐material-‐joints of metal sheets and composites by incremental in-‐situ forming processes Authors: Holger Seidlitz, Markus Bambach, Sebastian Fritzsche and Colin Gerstenberger 11:50 – 12:10 Paper number: 7 Title: Friction Spinning – Twist Phenomena and the Capability of Influencing Them Authors: Benjamin Lossen and Werner Homberg 12:10 – 12:30 Paper number: 66 Title: Combined Stamping-‐Forging for Non-‐Axisymmetric Product Authors: Muhammad Taureza, Atsushi Danno, Xu Song and Jin An Oh
LUNCH
14:00-14:50 Room 450 Plenary: M-J Tan (NTU, Singapore)
Additive manufacturing: System, material & challenges for building & construction
14:50-15:30 Room 450 ESAFORM Prize
15 :40 – 18 :00 PARALLEL SESSIONS Room 450 : Composites Forming Processes Chairman: P. Boisse 15:40 -‐16:00 Paper number: 201 Title: On the performances and wear of WC-‐Diamond Like Carbon coated tools in drilling of CFRP/Titanium stacks Authors: Luca Boccarusso, Massimo Durante, Filomena Impero, Fabrizio Memola Capece Minutolo, Fabio Scherillo and Antonino Squillace 16:00 – 16:20 Paper number: 236 Title: Simulation of the Propagation of an Electromagnetic Field in a Laminated Composite Part: Application to Microwave Heating Authors: Hermine Tertrais, Anaïs Barasinski and Francisco Chinesta
Room CH : Heat Tranfer Modelling Chairman: K. Mocellin 15:40 – 16:00 Paper number: 136 Title: High Cooling rate Crystallization Study at the Surface of Thermoplastic Parts and Thermal Contact Resistance Measurement Authors: Baptiste Pignon, Nicolas Boyard, Vincent Sobotka and Didier Delaunay 16:00 – 16:20 Paper number: 222 Title: The Improved Element Free Galerkin Method for 2D Thermo Elasticity problem Authors: Imen Debbabi and Hédi Belhadjsalah Room I : Semi-Solid Processes Chairman: Brabazon 15:40 – 16:00 Paper number: 59 Title: Material Efficient Production of Complex (Hybrid) Components Using Semi Solid Forming Processes Authors: Kim Rouven Riedmüller and Mathias Liewald 16:00 – 16:20 Paper number: 155 Title: Roll Casting of Al-‐SiCp Strip Authors: Toshio Haga Room KL : Constitutive Modelling Chairman: A.M. Habraken 14:40 – 16:00 Paper number: 25 Title: Strain Gradient Polycrystal Plasticity for Micro-‐Forming Authors: Tuncay Yalcinkaya, Igor Simonovski and Izzet Ozdemir 16:00 – 16:20 Paper number: 219 Title: A Gradient Enhanced Physically Based Plasticity:Implementation and Application to a Problem Pertaining Size Effect Authors: Semih Perdahcioglu and Celal Soyarslan Room J : Innovative Joining by Forming Technologies Chairman: G. Buffa 15:40 – 16:00 Paper number: 252 Title: Cold pressure welding by incremental rolling: deformation zone analysis Authors: Hans Schmidt, Werner Homberg, Christian Hoppe, Guido Grundmeier, Illia Hordych and Hans Jürgen Maier 16:00 – 16:20 Paper number: 258 Title: Finite volume modeling of laser assisted friction stir welding of 2017A-‐T451 aluminium alloy for enhanced sustainability of welded joints Authors: Oussama Mimouni, Riad Badji, Mohamed Hadji and Afia Kouadri-‐Henni
16 :20 – 16 :40 COFFEE BREAK Room 450 : Composites Forming Processes Chairman: S. Lomov 16:40 – 17:00 Paper number: 238 Title: Design for the Automation of Composite Wind Turbine Blade Manufacture Authors: Matteo Polcari, James Sherwood and Kari White 17:00 – 17:20 Paper number: 5 Title: Effect of the testing parameters in the frictional behaviours of yarn/yarn and fabric/fabric of glass plain weave reinforcement Authors: Lucila Montero, Samir Allaoui and Gilles Hivet 17:20 – 17:40 Paper number: 260 Title: Consolidation modelling for thermoplastic composites forming simulation Authors: Hu Xiong, Anton Rusanov, Nahiène Hamila and Philippe Boisse 17:40 – 18:00 Paper number: 186 Title: Innovative core material produced by infusion process using hemp fibres Authors: Luca Boccarusso, Luigi Carrino, Massimo Durante, Antonio Formisano, Antonio Langella and Fabrizio Memola Capece Minutolo. Room 200 : Composites Forming Proceses Chairman: R. Akkerman 16:40 – 17:00 Paper number: 147 Title: Model of Laser/Composite Interaction Based on Scattering by Multiple Cylinders Authors: Cyril Dedieu, Francisco Chinesta, Anais Barasinski, Adrien Leygue and Jean-‐Marc Dupillier 17:00 – 17:20 Paper number: 47 Title: Experimental Investigation Of Fiberglass Sandwich Composite Bending Behaviour After Severe Aging Condition Authors: Carla Gambaro, Enrico Lertora and Chiara Mandolfino 17:20 – 17:40 Paper number: 77 Title: Evaluation and Comparison of a Lightweight Bamboo Composite Authors: Andreas Loth, Michael Berwing and Ralf Förster 17:40 – 18:00 Paper number: 121 Title: Analysis of large displacements/ small strains of enhanced 3D beam with section changes Authors: Sasa Gao, Biao Liang and Emmanuelle Vidal-‐Salle Room CH : Structures, Properties and Processing of Polymers (and Biomass Based Materials) Chairman: G. Menary 16:40 – 17:00 Paper number: 17 Title: Injection Blow Moulding Single Stage Process: Validation of the Numerical Simulation through Tomography Analysis Authors: Jordan Biglione, Yves Béreaux and Jean-‐Yves Charmeau
17:00 – 17:20 Paper number: 190 Title: An Anisotropic Visco-‐hyperelastic model for PET Behavior under ISBM Process Conditions Authors: Yunmei Luo, Luc Chevalier and Eric Monteiro 17:20 – 17:40 Paper number: 135 Title: Experimental analysis on the coupled effect between thermo-‐optical properties and microstructure of semi-‐crystalline thermoplastics Authors: Sinan Boztepe, Abdoulahad Thiam, Olivier de Almeida, Yannick Le Maoult and Fabrice Schmidt 17:40 – 18:00 Paper number: 40 Title: Modeling of Thermoplastic Composites Laser Welding -‐ A Ray tracing Method Associated to Thermal Simulation Authors: Myriam Dauphin and Benoit Cosson Room I : Semi-Solid Processes Chairman: Brabazon 16:40 – 17:00 Paper number: 122 Title: Thermomechanical steels behaviors at semi-‐solid state Authors: Khalil Traidi, Véronique Favier, Philippe Lestriez, Karl Debray, Laurent Langlois, Nicolas Ranc, Michel Saby and Philippe Mangin. 17 :00 – 17:20 Paper number: 174 Title: Optimization of Pulsed Nd: YAG Laser Melting of Gray Cast Iron at Different Spot Sizes for Enhanced Surface Properties Authors: Zulhishamuddin Abdul Rahman, Syarifah Nur Aqida Syed Ahmad and Erween Abdul Rahim 17:20 – 17:40 Paper number: 262 Title: A Review of Semi-‐Solid Aluminium-‐Steel Joining Processes Authors: Obeidi Muhannad, Eanna McCarthy and Dermot Brabazon 17:40 – 18:00 Paper number: 270 Title: Semisolid Forming of 42CrMo4E Steel Grade. Authors: Gorka Plata, Jokin Lozares, Zigor Aspilgain, Zurine Idoyaga Room KL : Constitutive Modelling Chairman: T. Yalcinkaya 16:40 – 17:00 Paper number: 267 Title: Localized Versus Diffuse Damage: A Variational Approach Authors: Giovanni Lancioni and Valeria Corinaldesi 17:00 – 17:20 Paper number: 216 Title: An original prediction of localisation during tensile and biaxial expansion tests on copper by the compartmentalized model Authors: Ndeye Awa Sene, Pascale Balland, Laurent Tabourot, Mathieu Vautrot and Nesrine Ksiksi
17:20 – 17:40 Paper number: 73 Title: Modeling of void coalescence initiation and its impact on the prediction of material failure Authors: Sabeur Msolli, Mohamed Ben Bettaieb and Farid Abed-‐Meraim 17:40 – 18:00 Paper number: 168 Title: Non local damage model based on micromorphic formulation Authors: Diamantopoulou Evangelia, Labergere Carl and Saanouni Khemais Room J : Innovative Joining by Forming Technologies Chairman: G. Buffa 16:40 – 17:00 Paper number: 268 Title: Effect of Localized heat treatment on the weld line shift in deep drawing of Taylor welded blanks (TWBs) Authors: Satya Suresh V.V.N., Srinivasa Prakash Regalla, Ratna Sud
18:00 – 19:00 Room 450 General Assembly
19:00 – 23:00 Gala dinner
FRIDAY 29TH
9 :00 – 12 :00 PARALLEL SESSIONS Room 450 : Composites Forming Processes Chairman: E. Abisset-‐Chavanne 9:00 – 9:20 Paper number: 97 Title: Thermo-‐rheological-‐kinetical Study Of Compression Molding Of Fibre-‐reinforced Composites Authors: Luis F. Salazar Betancourt, Patrice Laure, Luisa Silva and Mustafa Sager 9:20 – 9:40 Paper number: 134 Title: Thermal Analysis During The Consolidation Of PA 66 composite By RTM Process Authors: Jalal Faraj, Jean-‐Luc Bailleul, Nicolas Boyard, Didier Delaunay, Nicolas Lefevre and Gilles Orange 9:40 – 10:00 Paper number: 116 Title: Saturated Versus Non-‐Saturated Two-‐Scales Permeability Authors: Elena Lopez, Emmanuelle Abisset-‐Chavanne, Christophe Binetruy and Francisco Chinesta 10:00 – 10:20 Paper number: 187 Title: A Step Towards the Numerical Simulation of SMC. Authors: Laura Oter Carbonell, Emmanuelle Abisset-‐Chavanne, Francisco Chinesta, Roland Keunings, Christophe Binetruy, Sebastien Comas-‐Cardona, Marta Pérez Miguel and Christophe Aufrere Room 200 : Structures, Properties and Processing of Polymers (and Biomass Based Materials) Chairman: F. Schmidt 9:00 – 9:20 Paper number: 20 Title: Infrared welding process on composite: Effect of interdiffusion at the welding interface Authors: André Chateau Akué Asséko, Éric Lafranche, Benoît Cosson, Fabrice Schmidt and Yannick Le Maoult 9:20 -‐ 9:40 Paper number: 54 Title: Development Of Bio-‐Sourced Binder To Metal Injection Moulding Authors: Alexandre Royer, Thierry Barriere and Jean-‐Claude Gelin 9:40 – 10:00 Paper number: 102 Title: Multiphase and Multiscale Approaches for Modeling the injection of textured molds Authors: Rebecca Nakhoul, Patrice Laure, Luisa Silva and Michel Vincent 10:00 – 10:20 Paper number: 130 Title: Higher Order Lubrication Solutions for Viscoelastic Flows in Converging or Diverging Slits Authors: Yves Bereaux, Jordan Biglione and Jean-‐Yves Charmeau
Room CH : Optimization and Inverse Analisys in Forming Chairman: A.H. van den Boogaard 9:00 – 9:20 Paper number: 255 Title: Design of a Mechanical Test to Characterize Sheet Metals -‐ Optimization using B-‐Splines or Cubic Splines Authors: Nelson Souto, Sandrine Thuillier and António Andrade-‐Campos 9:20 – 9:40 Paper number: 253 Title: Identification of microstructure evolution model on the basis of the inverse analysis of two-‐step compression tests Authors: Danuta Szeliga, Roman Kuziak and Maciej Pietrzyk 9:40 – 10:00 Paper number: 65 Title: Study on Objective Functions for the Slow Shot Phase in High-‐Pressure Die Casting Authors: Markus Frings, Marek Behr and Stefanie Elgeti Room I : Constitutive Modelling: from Macroscopic Behaviour Laws to Small-Scale Plasticity Chairman: E. Perdahcioglu 9:00 – 9:20 Paper number: 69 Title: Parameter Estimation of Rheological Models for Biological Materials Authors: Kenny Nona, Robert Mikulandric and Wouter Saeys 9:20 – 9:40 Paper number: 2 Title: Comparison of Constitutive Relationships of Tubes Established Using Uniaxial Tensile Tests and Tube Hydroforming Experiments Authors: Jing Li and Lianfa Yang 9:40 – 10:00 Paper number: 233 Title: Characteristic for TNW700 high temperature titanium superplastic properties Authors: Baosheng Liu, Wei Wu and Yuansong Zeng Room KL : Flatness, Straightness, Levelling, Straightening: Measurement, Modeling and Control Chairman: P. Montmitonnet 9:00 – 9:20 Paper number: 89 Title: Numerical Simulations of a Two Roll Round Bar Straightener Authors: Baptiste Flipon, Didier Lawrjaniec, Luc Papeleux, Jean-‐Philippe Ponthot and Anne-‐Marie Habraken 9:20 – 9:40 Paper number: 92 Title: Optimal intermeshing of multi roller cross roll straightening machine Authors: Jindrich Petruska, Tomas Navrat, Frantisek Sebek and Marek Benesovsky 9:40 – 10:00 Paper number: 180 Title: A study of flatness defect in strip rolling occurred in tension unloading Authors: Sami Abdelkhalek, Hamid Zahrouni, Nicolas Legrand and Michel Potier-‐Ferry
10:00 – 10:20 Paper number: 197 Title: Numerical 2D-‐Modeling Of Multiroll Leveling Authors: Norman Mathieu, Michel Potier-‐Ferry and Hamid Zahrouni Room J : Mathematical and Computer Science Methods for Biomass and Food Materials Processing Chairman: M. Charalambides 9:00 – 9:20 Paper number: 21 Title: Modelling Oxygen Dissolution during Oenological Fermentations: Finite Element Formulation Authors: Tomás Cerda-‐Drago, Eduardo Agosin, José Pérez-‐Correa and Diego Celentano 9:20 – 9:40 Paper number: 93 Title: Grating-‐based X-‐ray Tomography of 3D Food Structures Authors: Rikke Miklos, Mikkel Schou Nielsen, Hildur Einarsdottir and René Lametsch 9:40 – 10:00 Paper number: 104 Title: Phenomenological Model of Maize Starches Expansion by Extrusion Authors: Magdalena Kristiawan, Guy Della Valle, Kamal Kansou, Amadou Ndiaye and Bruno Vergnes 10:00 – 10:20 Paper number: 211 Title: Development of a Model for the Simulation of Farinograph Measurements Authors: Bernhard Hermannseder, Muhammad Haseeb Ahmad, Philipp Kügler and Bernard Hitzmann
COFFEE BREAK
Room 450 : Composites Forming Processes Chairman: A. Barasinski 10:40 – 11:00 Paper number: 259 Title: Confined Kinematics of Suspended Rigid Fibres Authors: Adrien Scheuer, Marta Perez, Emmanuelle Abisset-‐Chavanne, Francisco Chinesta and Roland Keunings 11:00 – 11:20 Paper number: 206 Title: Movement of patches during thermoforming: experiment and simulation Authors: Julia Schell, Lucile Amory and Damien Guillon 11:20 – 11:40 Paper number: 250 Title: Direct simulation of long and short fiber suspensions Authors: Rabih Mezher, Emmanuelle Abisset-‐Chavanne, Julien Férec, Gilles Ausias and Francisco Chinesta 11:40 – 12:00 Paper number: 199 Title: Stamp forming optimization for formability and crystallinity Authors: Thijs Donderwinkel, Bert Rietman, Sebastiaan Haanappel and Remko Akkerman
12:00 – 12:20 Paper number: 213 Title: Prediction of thickness distribution of thermoformed multilayer ABS/PMMA sheets Authors: Jobey Caroline, Allanic Nadine and Mousseau Pierre Room 200 : Structures, Properties and Processing of Polymers (and Biomass Based Materials) Chairman: N. Boyard 10:40 – 11:00 Paper number: 144 Title: Wear Behaviour of Epoxy Resin Filled with Hard Powders Authors: Antonio Formisano, Luca Boccarusso, Fabrizio Capece Minutolo, Luigi Carrino, Massimo Durante and Antonio Langella 11:00 – 11:20 Paper number: 157 Title: In-‐situ measurements of temperature distribution during transmission laser welding of poly(aryletherketone) Authors: Miguel Villar, Christian Garnier, France Chabert, Valérie Nassiet, Carlos Diez, Andres Sotelo and Maria Madre 11:20 – 11:40 Paper number: 195 Title: Rate Growth Simulation of Spherulitic Microstructure of PET Induced by the Temperature Using the Phase Field Method Authors: Yanghao Gong, Yunmei Luo, Luc Chevalier and Fabrice Detrez 11:40 – 12:00 Paper number: 269 Title: Mechanical behavior of glass fiber Woven UD Authors: H.Ramezani, M.Gomina, J.Bréard, G.Orange Room CH : Optimization and Inverse Analisys in Forming Chairman: A. Gil Andrade-‐Campos 10:40 – 11:00 Paper number: 129 Title: On the use of topology optimization for improving heat transfers in molding process Authors: Alban Agazzi, Ronan Legoff and Cong Truc Vu 11:00 – 11:20 Paper number: 179 Title: Experimental Approach For Thermal Parameters Estimation During Glass Forming Process Authors: Bakri Abdulhay, Brahim Bourouga, Carole Challita and Florent Alzetto 11:20 – 11:40 Paper number: 256 Title: A Hybrid Approach for Optimization in Non-‐isothermal Glass Molding Authors: Anh Tuan Vu, Holger Kreilkamp, Bharathwaj J. Krishnamoorthi, Olaf Dambon and Fritz Klocke
Room I : Extrusion and Drawing Chairman: Valberg 10:40 – 11:00 Paper number: 3 Title: Experimental determination of plastic strain in the extrusion process Authors: Johannes Kronsteiner, Dieter Horwatitsch, Andreas Hinterer, Christian Gusenbauer and Klaus Zeman 11:00 – 11:20 Paper number: 19 Title: Effects of Extrusion Speed on Mechanical and Morphological Changes in Cold Plastic Joining of Dissimilar Metals Authors: Joseph Ajiboye and Olayiwola Awojobi 11:20 – 11:40 Paper number: 35 Title: Tailoring properties of commercially pure titanium by Gradation Extrusion Authors: Markus Bergmann, Anja Rautenstrauch, René Selbmann, Raoni Barreto de Oliveira, Rodrigo Santiago Coelho and Dirk Landgrebe 11:10 – 12:00 Paper number: 115 Title: Die Swell as an Objective in the Design of Extrusion Dies Authors: Roland Siegbert, Marek Behr and Stefanie Elgeti Room KL : Nano-Structured Materials and Micro Forming Chairman: U. Engel. 10:40 – 11:00 Paper number: 105 Title: Microstructure versus substructure size effect Authors: Ehsan Ghassemali, Anders E.W. Jarfors, Ming-‐Jen Tan and Chua Beng Wah 11:00 – 11:20 Paper number: 131 Title: Incremental Non-‐Equal Channel Angular Pressing – FE Simulation Authors: Andrzej Rosochowski and Lech Olejnik 11:20 – 11:40 Paper number: 172 Title: Modelling the deformation of nickel foil during manufacturing of nanostructures on injection moulding tool inserts Authors: Mads Sonne 11:40 – 12:00 Paper number: 257 Title: Effect of shear angle on the material flow and hardness distribution during incremental ECAP of Al-‐1050 billets Authors: Mohammad Salamati, Muhammad Jawad Qarni, Saeed Tamimi and Andrzej Rosochowski Room J : Mathematical and Computer Science Methods for Biomass and Food Materials Processing Chairman: P. Verboven 10:40 – 11:00 Paper number: 159 Title: Experimental and Numerical Investigation of Ram Extrusion of Bread Dough Authors: Mohd Afandi P. Mohammed, Leonard Wanigasooriya and Maria Charalambides
11:00 – 11:20 Paper number: 181 Title: Sensitivity of a Bubble Growth to the Cheese Material Properties during Ripening Authors: Georges Fokoua, David Grenier and Tiphaine Lucas 11:20 – 11:40 Paper number: 151 Title: Image Analysis and Mathematical Modelling for the Supervision of the Dough Fermentation Process Authors: Viktoria Zettel, Olivier Paquet-‐Durand, Florian Hecker and Bernd Hitzmann 11:40 – 12:00 Paper number: 212 Title: Multi-‐objective optimization of an insulating product based on wood fiber material Authors: Mohamad Hussein Hobballah, Pierre Vignon and Huyen Tran
12 :00 – 13 :00 Coktail @ Mezzanine