Post on 24-Apr-2020
Canopy Kimball Benching
Page 2.1
➤See page
Product Positioning page 2.3
Statement of Line page 2.3
Planning page 2.8
Overview page 2.8
Dimensions 2.10
Benches 2.14
Trusses 2.18
Ends 2.20
Meeting Booths 2.24
Grommet Options page 2.26
Cut-Out Options page 2.27
Accessory Frame Options 2.28
Screens 2.29
Accessories 2.33
Cable Management 2.36
Pricing page 2.37
Benches 2.37
Ends 2.41
Screens 2.55
Accessories 2.66
Surface Materials page 2.76
Wood 2.76
Laminate 2.77
Paint and Vinyl 2.79
Fabric and Felt 2.80
Benching
CANOPY® HEIGHT ADJUST Table of ContentsPrice List Effective Dates: Pricing 03.02.20Revisions 03.16.20
Specifications:
Range of adjustment 281/2" to 43"(includes worksurface)
Lifting capacity 265 lbs. per bench side
Controller Up/down Programmable
Bench motor Two motors One control box
Noise level 39dBA
Volts 120v AC 24v DC
Amps (maximum) 6
Standby power .05 watts
Frequency and phase 60hz
Adjustability speed .5 per second
Duty cycle 10% (2 min. on; 18 min. off)
Anti-collision Yes
Overheat protection Yes
UL1286 listed Yes
Canopy Kimball Benching
Product PositioningCANOPY®
Height Adjust
Page 2.2
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Canopy height adjust offeringincludes a bench with optional tableends, end media walls and screensto create a work environment withvarying degrees of privacy with theunique canopy screens to divide thespace.
IMPORTANT Canopy componentsare UL 1286 listed as furniture sys-tem. Electrical components attachedto the bench are UL 962 listed.
Canopy Kimball Benching
Statement of LineBenches CANOPY®
Height Adjust
Page 2.3
IMPORTANT: All dimensions shownbelow are nominal and have beenrounded to the nearest inch. Referthe appropriate pricing pages foractual dimensions.
Bench 1• No power/data tray.➤See page 2.15 for product info.➤See page 2.37 to specify.
60"W 72"W
60"D • •
Bench 2• With power/data tray for use withAxil Z power/data center.
➤See page 2.16 for product info.➤See page 2.38 to specify.
60"W 72"W
60"D • •
Bench 4• With power/data tray for use with Interlink iQ single-circuit power system.
➤See page 2.17 for product info.➤See page 2.39 to specify.
60"W 72"W
60"D • •
Programmable Memory Control Switch➤See page 2.14 for product info.➤See page 2.40 to specify.
Ganging Connector➤See page 2.14 for product info.➤See page 2.40 to specify.
Wood Truss➤See page 2.18 for product info.See page 2.40 to specify.
Canopy Kimball Benching
Statement of LineEnds CANOPY®
Height Adjust
Page 2.4
IMPORTANT: All dimensions shownbelow are nominal and have beenrounded to the nearest inch. Referthe appropriate pricing pages foractual dimensions.
Table End with Rectangular Height-Adjustable Worksurface➤See page 2.19 for product info.➤See page 2.41 to specify.
59"W
28"D •
Table End with Half-Round Height-Adjustable Worksurface➤See page 2.19 for product info.➤See page 2.42 to specify.
59"W
29"D •
Fixed End Media Wall➤See page 2.20 for product info.➤See page 2.43 to specify.
59"W
29"D •
Fixed End Seat➤See page 2.21 for product info.➤See page 2.44 to specify.
59"W
29"D •
End Media Wall for Bench withRound Height-Adjustable Worksurface➤See page 2.22 for product info.➤See page 2.45 to specify.
59"W
59"D •
End Media Wall for Bench withHalf-Ellipse Height-Adjustable Worksurface➤See page 2.22 for product info.➤See page 2.46 to specify.
59"W
61"D •
End Media Wall for Bench withEllipse Height-Adjustable Worksurface➤See page 2.22 for product info.➤See page 2.47 to specify.
59"W
54"D •
Freestanding End Media Wall withRound Height-Adjustable Worksurface➤See page 2.22 for product info.➤See page 2.48 to specify.
59"W
59"D •
Freestanding End Media Wall with Half-Ellipse Height-Adjustable Worksurface➤See page 2.22 for product info.➤See page 2.49 to specify.
59"W
61"D •
Freestanding End Media Wall withEllipse Height-Adjustable Worksurface➤See page 2.22 for product info.➤See page 2.50 to specify.
59"W
54"D •
Canopy Kimball Benching
Statement of LineMeeting Booth, Tops, and BasesCANOPY®
Height Adjust
Page 2.5
IMPORTANT: All dimensions shownbelow are nominal and have beenrounded to the nearest inch. Referthe appropriate pricing pages foractual dimensions.
Meeting Booth➤See page 2.24 for product info.➤See page 2.51 to specify.
72"W
60"D •
Tops ➤See page 2.54 to specify.
24"W 42"W
42"H • •
Pneumatic Base ➤See page 2.54 to specify.
Canopy Kimball Benching
Statement of LineScreensCANOPY®
Height Adjust
Page 2.6
IMPORTANT: All dimensions shownbelow are nominal and have beenrounded to the nearest inch. Referthe appropriate pricing pages foractual dimensions.
Worksurface Privacy Screens➤See page 2.32 for product info.➤See pages 2.61–2.63 to specify.
59"W 60"W 72"W
15"H • • •
Worksurface Privacy Screens withAccessory Rail➤See page 2.32 for product info.➤See page 2.64 to specify.
59"W 60"W 72"W
15"H • • •
Worksurface Privacy Screens withBungee Cords➤See page 2.32 for product info.➤See page 2.65 to specify.
59"W 60"W 72"W
15"H • • •
Fixed-Height Center Screens➤See page 2.30 for product info.➤See pages 2.55–2.57 to specify.
60"W 72"W
22"H • •36"H • •
Fixed Canopy Screens➤See page 2.31 for product info.➤See page 2.58 to specify.
30"W 60"W 72"W
43"H • • •52"H •
Canopy Kimball Benching
Statement of LineAccessoriesCANOPY®
Height Adjust
Page 2.7
IMPORTANT: All dimensions shownbelow are nominal and have beenrounded to the nearest inch. Referthe appropriate pricing pages foractual dimensions.
Accessories for Worksurface G34Accessory Frame➤See page 2.33 for product info.➤See page 2.74 to specify.
Perforated Cable Tray➤See page 2.36 for product info.➤See page 2.66 to specify.
Accessories for Screen Accessory Rails➤See page 2.33 for product info.➤See page 2.75 to specify.
Monitor Arms➤See pages 2.34–2.35 for product info.➤See page 2.73 to specify.
Cable Management and Organizational Accessories➤See page 2.36 for product info.➤See page 2.66 to specify.
Perks Trackless Keyboard Arm➤See the Perks chapter of the KimballDesks Accessories Price List.
Interlink iQ Single-Circuit PowerSystem Components• For use with Bench 4.➤See page 2.68 to specify.
Axil Z Power Center• For use with bench 2 or freestand-ing applications
➤See page 2.67 to specify.
Power and Data Components➤See page 2.69 to specify.
Canopy Kimball Benching
PlanningOverviewCANOPY®
Height Adjust
Page 2.8
Bench Types:
Up/down switch (one per side) isstandard; programmable switch isavailable separately.
Bench models include a sit-to-standbase and two worksurfaces. Benchessupport a maximum weight of 300lbs. per worksurface.
Specify the type of bench based onpower/data needs.➤See far right column for descriptions.
Worksurfaces, which are part of thebench model, have square edges andare 3⁄4" thick. They are available in:• Thermally fused laminate (TFL) withvinyl or ply rim
• High-pressure laminate (HPL) withvinyl, ply rim or plywood edge
• Wood veneer with a wood rim• Plywood with exposed plywoodedge
Anti-collision function on controlbox (one per side) reduces damageto the desk and surrounding objectsin the event of collision with a firmobject. If an obstruction is detected,the table will stop and move in theopposite direction. The control boxalso has a built-in safety feature toshut down should the motor overheatand includes a 7' power cord.
Center-mount fixed screens canbe specified for use on benches;screens are specified separately. Privacy worksurface screens andcanopy screens are also available.Two screens are specified per bench.They can be the same or different.
Sit-to-stand base adjusts in heightfrom 28"–421⁄2". Base is available in501 platinum metallic at no upcharge.
Each worksurface has its own liftcolumns and central control box forsynchronization.
Two-column leg compresses insideitself in lower positions. Illustrationshows bench in its lowest position.
Bench 1No power/data tray.➤See page 2.15
Bench 2Power/data tray for use withpower/data center.➤See page 2.16
Crossrails span between height-adjust legs and supports power/datatrays.
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Bench 4Power/data tray for use with InterlinkiQ single-circuit power system.➤See page 2.17
Canopy Kimball Benching
OverviewCANOPY®
Height Adjust
Page 2.9
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76continued
Ganging connector, specified sepa-rately, connect benches together.Ganging connector is screwed to theunderside of the crossrails of bothbenches. Specify 28F29GCP whenconnecting two benches together.
1" gap minimum between side-by-side worksurfaces is required tominimize pinch/clearance hazards.
Ganging connector is sized to provide the required 1" minimumclearance when worksurfaces areinstalled appropriately.
Different screen types aredesigned to align when used togetherbench to bench. Worksurface privacyscreen brackets are designed to alignwith a center screen or canopy.
Height-adjustable table ends areavailable in rectangular and half-roundshapes.
Benches can be used singly with oneframe providing a two-person work-station or several benches can beconnected to form a dual-sided run.
Canopy screens offer an optionallevel of privacy.
Optional wood truss adds a customized accent to base frames.
Worksurface grommets, cut-outs,and accessory frames are availablefactory installed.
Cable management accessoriesstore and organize cables beneaththe worksurface.
Canopy Kimball Benching
Planning
Dimensions
OverviewCANOPY®
Height Adjust
Page 2.10
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Travel Range:Benches have a 141⁄2" travel range from 28" to 421⁄2",which includes the worksurface thickness. Each worksur-face works independently of the adjoining or facing bench.
Bench Depth:Bench is available in one overall depth. Worksurfaces arepositioned in one location to maintain the overall depth of591⁄4" to align with end media and table end units.
28"minimum
141⁄2"adjustmentrange
421⁄2"maximum
281⁄4"281⁄4"
591⁄4"
23⁄4"
281⁄4"
A (inside)
591⁄4"23⁄4" (gap between worksurfaces without screens or Canopy)
281⁄4"
B (outside)
131⁄2"
113⁄4"(blade depth)
(worksurfaceoverhangs bladeon each side)
Distance between Legs:
Dimension A Dimension BWidth of top (Inside) (Outside)
60" 271⁄4" 323⁄4"
72" 391⁄4" 4434"Perks trackless keyboard kit(model 99K1806KAT) can be installedon the user side of worksurfaces witha suggested clearance of 93⁄8" fromthe front of edge of the worksurface.➤See the Perks chapter of the Kimball Desks & Accessories Price List.
Canopy Kimball Benching
Planning
Dimensions, continued
OverviewCANOPY®
Height Adjust
Page 2.11
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Benches with no screens Two 15"H worksurface privacyscreens
Two 361⁄4"H fixed height centerscreens
Two 43"H canopy screens 361⁄4"H fixed height center screen and15"H worksurface privacy screen
flushflush23⁄4"5⁄16" gap5⁄16" gap 5⁄16" gap5⁄16" gap 5⁄16" gapflush
IMPORTANT: For benches withscreens, two screens must be speci-fied (one for each side of the bench).They can be the same or different.
IMPORTANT: Even though a gapexists between the worksurface andcenter or canopy screens, cablescannot exit from the worksurfacethrough the gap; specify a grommetor accessory frame.
15"H worksurface privacy screen and43"H canopy screen
361⁄4"H fixed height center screen and43"H canopy screen
5⁄16" gapflush5⁄16" gap5⁄16" gap
Gap Between Worksurfaces or Screens:
Canopy Kimball Benching
Planning
Dimensions, continued
OverviewCANOPY®
Height Adjust
Page 2.12
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Overall Height:
28"
133⁄8"
421⁄2"
133⁄8"
28"
441⁄2"
421⁄2"
28"
565⁄8"
421⁄2"
28"
633⁄8"
421⁄2"
Two 15"H worksurface privacy screens Two 221⁄8"H fixed-height center screens
Two 361⁄4"H fixed-height center screens Two 43"H canopy screens
Canopy Kimball Benching
Planning
Edge/Rim Profiles
OverviewCANOPY®
Height Adjust
Page 2.13
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Edge/rim profiles differ based onthe top or screen material selected.
Softened Vinyl Rim (P) • Applies to TFL or HPL worksurfaces,center screens, and worksurface privacy screens
• 2mm vinyl edge• Profile is on all four sides
Ply Rim (E)• Applies to TFL or HPL worksurfaces,center screens, and worksurface privacy screens
• 1mm edge• Profile is on all four sides
Softened Wood Rim (F) • Applies to wood veneer worksurfaces• 2mm wood rim• Profile is on all four sides
Plywood Edge (D and D2)• Applies to HPL and plywood worksurfaces, canopy screens, center screens, and worksurface privacy screens
• No rim; exposed plywood on all four sides
• Small voids may be visible in the edge,an inherent characteristic of plywood
Canopy Kimball Benching
PlanningBenchesCANOPY®
Height Adjust
Page 2.14
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Bench models include a base andtwo worksurfaces. There are fourbench types based on no power ortwo different integrated poweroptions. Adjustment range is28"–421⁄2". Base is available in 501platinum metallic at no upcharge.➤See page 2.15 for bench 1.➤See page 2.16 for bench 2.➤See page 2.17 for bench 4.
Worksurfaces, which are part of thebench model, have square edges andare 3⁄4" thick. They are available in:• Thermally fused laminate (TFL) withvinyl or ply rim
• High-pressure laminate (HPL) withvinyl, ply rim or plywood edge
• Wood veneer with a wood rim• Plywood with exposed plywoodedge
Grain direction runs with the width.Note: Rotary woodgrain patterns onplywood tops will vary from one top toanother.
Worksurface edge/rim profilesdiffer based on the top material selected. ➤See page 2.13.
Several flexible worksurfaceoptions are available for routing cordsand cables and accessing power anddata. As well, accessory frames canaccommodate accessories forincreased productivity.
Factory-installed worksurfaceoptions include:• Worksurface grommets (G1 andG19)
• Worksurface cut-outs forpower/data centers (C4, C6, G20,G28 and C29)
• Accessory frames (G34)These options are available in prede-termined locations. Upcharges apply.➤See page 2.26 for grommets.➤See page 2.27 for cut-outs.➤See page 2.28 for accessoryframes.
Standard Programmable
Two up/down switch controlboxes, one per side, ships standardwith all benches. Program mablememory control switch with four settings and display can be specifiedseparately to replace a standard module. Both the standard and theprogrammable switches can bemounted on the left or right side of theworksurface and are field installed.
Glides are standard with a silvermetal top and black plastic base.They are 21⁄4" diameter and 1⁄2"H.Stem is 5⁄8" and leveling range is 1⁄4".If more leveling is required, a break inthe bench run may be necessary.
Connections
Ganging connector, model28F29GCP, is specified separately tolink benches together.
Planning Factors
When specifying storage, themaximum clearance under theheight-adjustable bench frame to thefloor is 241⁄4" with the leveling glide inthe lowest position.
Perks hanging CPU holder cannotbe used with Canopy benches as itwill interfere with the understructure.
Canopy center and worksurfacescreens are specified in the samewidth as the bench.
Clamp-on monitor arms andpower units cannot be used withCanopy bench.
Related Products
Perks trackless keyboard arm,model 99K1806KAT, can be installedunder the bench worksurface on userside. ➤See the Perks chapter of the KimballDesks & Accessories Price List.
Cable management accessoriesfor benches and end units, includingthe cable trays, and basketsare available.➤See page 2.36.
Canopy Kimball Benching
Planning
Bench 1
BenchesCANOPY®
Height Adjust
Page 2.15
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Two-column leg compresses insideitself in lower positions.
Bench 1 models provide a basicbench without an integratedpower/data tray. Note: Base shown here without work-surfaces, which are standard with allbench models.
Holes in the mid-crossrail to attachtwo fixed center or canopy screensare standard on all bench models.Decorative crossrail covers arerequired if no screens are specified.
Blade supports and attaches theworksurface to the base.
Up/down switch (one per side) isstandard; programmable switch isavailable separately.
Control box (one per side) is standard.
Canopy Kimball Benching
Planning
Bench 2
BenchesCANOPY®
Height Adjust
Page 2.16
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Up/down switch (one per side) isstandard; programmable switch isavailable separately.
Two-column leg compresses insideitself in lower positions.
Bench 2 models provide an inte-grated power/data tray runningthrough the center of the base with anopening to accept one Axil Zpower/data center; specified sepa-rately. Note: Base shown here without work-surfaces, which are standard with allbench models.
Holes in the mid-crossrail to attachtwo fixed center or canopy screensare standard on all bench models.Decorative crossrail covers arerequired if no screens are specified.
Integrated power/data trayattaches to the bottom side of thecrossrails.
Control box (one per side) is standard.
Blade supports and attaches theworksurface to the base.
Axil Z power/data center, specifiedseparately, fits in cut-out provided inthe power/data tray.
Blade supports and attaches theworksurface to the base.
Canopy Kimball Benching
Planning
Bench 4
BenchesCANOPY®
Height Adjust
Page 2.17
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Holes in the mid-crossrail to attachtwo fixed center or canopy screensare standard on all bench models.Decorative crossrail covers arerequired if no screens are specified.
Bench 4 models provide an inte-grated power/data tray runningthrough the center of the base toaccept an Interlink iQ single-circuitpower system; specified separately.Note: Base shown here without work-surfaces, which are standard with allbench models.
Two-column leg compresses insideitself in lower positions.
Up/down switch (one per side) isstandard; programmable switch isavailable separately.
Control box (one per side) is standard.
Integrated power/data tray pro-vides openings for power inserts.
Interlink iQ single-circuit powersystem, components specified sepa-rately, mounts to the underside of thepower/data tray of Bench 4. The sys-tem consists of a power infeed whichconnects to the power harness withtwo Axil Z power/data centers. Amaximum of four benches can besupported by one power in-feed. The power infeed features a sensorbox that prevents overloading.➤See page 2.68
Note: When specifying end units withInterlink iQ, one end unit will count asone bench.
Canopy Kimball Benching
PlanningTrussesCANOPY®
Height Adjust
Page 2.18
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Optional wood truss is available toadd a customized accent to all bench,end media wall and fixed end compo-nents.
Trusses are constructed of solidbeech and available in paints or woodfinishes.
Trusses on Both Sides of Bench FrameOrder a quantity of two per bench as shown.
Trusses on Every Other Frame or Specific FramesOrder a quantity of four for the configuration shown.
Trusses on All Adjustable- or Fixed-Support FramesOrder a quantity of seven for the configuration shown.
Canopy Kimball Benching
PlanningHeight-Adjustable Table EndsCANOPY®
Height Adjust
Page 2.19
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Height-adjustable table endsattach to either end of a bench to create an additional personal work-space or communal meeting area.
Each model includes:• Sit-to-stand base• One worksurface• Frame to attach to bench.
Adjustment range is 28"–421⁄2".Base is available in 501 platinummetallic at no upcharge.
Worksurfaces have square edgesand are available in the same materials as the bench: • Thermally fused laminate (TFL) withvinyl or ply rim
• High-pressure laminate (HPL) withvinyl, ply rim or plywood edge
• Wood veneer with a wood rim• Plywood with exposed plywoodedge
Worksurface edge/rim profilesdiffer based on the top material selected. ➤See page 2.13.
Rectangular Half-Round
Two worksurface shapes are available: rectangle and half-round.Grain direction runs with width.
Factory-installed grommets andcut-outs are available in pre-determined locations the same as the bench; upcharge applies. ➤See pages 2.26–2.27.
Standard Programmable
One up/down switch control boxships standard with each table end.Programmable memory control switchwith four settings and display can bespecified separately to replace a stan-dard module. Both the standard andthe programmable switches can bemounted on the left or right side of theworksurface and are field installed.
Glides are standard with a silvermetal top and black plastic base.They are 21⁄4" diameter and 1⁄2"H.Stem is 5⁄8" and leveling range is 1⁄4".If more leveling is required, a break inthe bench run may be necessary.
Power options for height-adjustabletable ends are the same as offered onbenches.
Table ends without power/datatray—models 28F3060BNERT1SEand 28F3060BNEHR1SE—provide abasic table end without an integratedpower/data tray. The H-frame shipswith the unit and replaces the benchcrossrail to attach table end to bench.Frame is open to the floor.
Table ends with power/data trayfor use with Axil Z power/datacenter—models 28F3060BNERT2SEand 28F3060BNEHR2SE—provide integrated power/data tray runningthrough the center of the base with anopening to accept one Axil Z powerdata center; specified separately. Thepower data tray is attached to the H-frame, which replaces the bench endcrossrail to attach table end to thebench.
With power/data tray for use withfor use with Interlink iQ single-circuit power system—models 28F3060BNERT4SE and28F3060BNEHR4SE—provide anintegrated power/data tray runningthrough the center of the base with an opening to accept an interlink iQsingle-circuit power system with twoAxil Z per/data center; specified sepa-rately. The power data tray is attachedto the H-frame, which replaces thebench end crossrail to attach tableend to the bench.
Related Products
Cable management accessoriesfor benches and end units, includingthe cable trays and baskets,are available.➤See page 2.36.
Canopy Kimball Benching
PlanningFixed End Media WallCANOPY®
Height Adjust
Page 2.20
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Fixed end media wall attaches tothe end of a bench and provides animpromptu meeting area. The insidecurve can be specified with a writablelaminate or can accommodate a mon-itor. The unit ships knock down andcannot be used as a freestanding unit.
Canopy screen ships with the unitand is 591⁄4"W x 52"H. Three quarter-inch thick exposed plywood edge isstandard with a variety of materialcombinations in HPL, writable HPLand felt.
Equipment shelf offers space tolocate media equipment. It is 111⁄8"Dand spans the width of canopy. Topsurface is HPL with 3⁄4" thick exposedplywood edge. Shelf sits 191⁄2" abovethe floor. The equipment shelf cannotbe used as a seat.
Optional G19C center grommet inshelf (center back) is available tomanage media cords to powersource. See page 1.7 for finishoptions.
Fixed frame has a 501 platinummetallic paint finish and accommo-dates the wood truss (specified sepa-rately).
Fixed end media wall withoutpower/data tray—model28F6070MWBEF1—provides a basicunit without an integrated power/dataframe. The H-frame ships with the unitand replaces the bench end crossrailto attach the fixed end media wall tobench. Frame is open to the floor.
Fixed end media wall withpower/data tray for use with Axil Zpower/data center—model28F6070MWBEF2—provides integrated power/data tray runningthrough the center of the base with anopening to accept one Axil Z powerdata center; specified separately. Thepower data tray is attached to the H-frame, which replaces the bench endcrossrail to attach the fixed end mediawall to the bench.
With power/data tray for use withfor use with Interlink iQ single-circuit power system—model 28F6070MWBEF4—providesan integrated power/data tray runningthrough the center of the base with an opening to accept an interlink iQsingle-circuit power system with oneAxil Z per/data center; specified sepa-rately. The power data tray is attachedto the H-frame, which replaces thebench end crossrail to attach the fixedend media wall to the bench.
Connections
Flat-screen TV or monitor can bemounted to a Canopy screen. TV ormonitor should not exceed 60" diago-nal in size or 40 lbs. maximum. A fixedTV mount should be used with woodscreens not exceeding 5⁄8" projection.Tilt and full-mount TV mounts cannotbe mounted on a canopy screen.
Canopy Kimball Benching
PlanningFixed End Seat for BenchCANOPY®
Height Adjust
Page 2.21
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Fixed end seat for bench attachesto the end of a bench and providesseating to be paired with freestandingtables to create impromptu meetingareas. The unit ships knock and can-not be used as a freestanding unit.
Canopy screen ships with the unitand is 591⁄4"W x 52"H. Three quarter-inch thick exposed plywood edge isstandard with a variety of materialcombinations in HPL, writable HPLand felt.
Upholstered seat is 187⁄8" deep andspans the width of canopy. The cush-ion attaches to an HPL shelf with 3⁄4"thick exposed plywood edge. Thecushion sets 207⁄8" above the floor.
Fixed frame is 501 platinum andaccommodates the wood truss (specified separately).
H-frame ships with the unit andreplaces the end crossrail to attach tothe bench. Power options are notavailable.
Canopy Kimball Benching
PlanningEnd Media Wall with Height-Adjustable WorksurfaceCANOPY®
Height Adjust
Page 2.22
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
End media walls with height-adjustable worksurface are avail-able as freestanding units and "forbench" models that much be attachedto a bench for support.
Model for bench attaches to eitherend of a bench to create a meetingarea. These models cannot be usedas a freestanding unit.
Freestanding models feature anadditional floor frame for stability instand-alone applications.
Units ship knocked down.
Height-adjustable worksurfacesfeatures a sit-to-stand frame.
Adjustment range is 28"–421⁄2".
Canopy can be used for privacy andto provide a mounting place for flat-screen TV or monitor.
IMPORTANT: Canopy, model28F6052CASE, is required and mustbe ordered separately. It attaches tothe back of the equipment shelfframe. The overall height with thecanopy screen installed is 697⁄8",which is taller than the bench withcanopy.
Equipment shelf offers space tolocate media equipment. It is 111⁄8"Dand spans the width of canopy. Topsurface is HPL with 3⁄4" thick exposedplywood edge. Shelf sits 191⁄2" abovethe floor. The equipment shelf cannotbe used as a seat.
Fixed frame supports equipmentshelf. Frame on end media walls forbench attaches to bench.
Glides are standard with a silvermetal top and black plastic base.They are 21⁄4" diameter and 1⁄2"H.Stem is 5⁄8" and leveling range is 1⁄4".If more leveling is required, a break inthe bench run may be necessary.
Floor frame on freestanding models includes cross members(shown as dashed lines) for increased stability.
Canopy Kimball Benching
Planning
continued
End Media Wall with Height-Adjustable WorksurfaceCANOPY®
Height Adjust
Page 2.23
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
For bench attachment
Freestanding
Each model includes:• Sit-to-stand base• One worksurface• Fixed frame with equipment shelf
IMPORTANT: Canopy, model28F6052CASE, is required and mustbe ordered separately. It attaches tothe back of the equipment shelfframe. The overall height with thecanopy screen installed is 697⁄8",which is taller than the bench withcanopy.
Frame is available in 501 platinummetallic at no upcharge.
Worksurfaces have square edgesand are available in the same materials as the bench: • Thermally fused laminate (TFL) withvinyl or ply rim
• High-pressure laminate (HPL) withvinyl, ply rim or plywood edge
• Wood veneer with a wood rim• Plywood with exposed plywood edge
Worksurface edge/rim profilesdiffer based on the top material selected. ➤See page 2.13.
Round
Half-Ellipse
Ellipse
Three worksurface shapes are available: round (473⁄8" diameter),half-ellipse (59"W x 445⁄8"D), andellipse (59"W x 373⁄4"D). Grain direction runs with width.
Standard Programmable
One up/down switch control boxships standard with each table end.Programmable memory control switchwith four settings and display can bespecified separately to replace a stan-dard module. Both the standard andthe programmable switches can bemounted on the left or right side of theworksurface and are field installed.
Factory-installed grommets andcut-outs in worksurface are availablein pre-determined locations the sameas the bench; upcharge applies. ➤See pages 2.26–2.27
Optional G19C center grommet inequipment shelf (center back) isavailable to manage media cords topower source. ➤See page 2.26 for finish options.
End media wall with height-adjustable worksurface withoutpower/data tray—models28F6070MWRD1SE,28F6070MWHE1SE, and28F6070MWEL1SE—provides a
basic unit without an integratedpower/data frame. The H-frame thatattaches the height-adjustable table tothe fixed frame with equipment shelf isopen to the floor.
Fixed end media wall withpower/data tray for use with Axil Zpower/data center—models28F6070MWRD2SE,28F6070MWHE2SE, and28F6070MWEL2SE—provides integrated power/data tray runningthrough the center of the base with anopening to accept one Axil Z powerdata center; specified separately. Thepower data tray is attached to the H-frame, which replaces the bench endcrossrail to attach the end media wallto the bench.
With power/data tray for use withfor use with Interlink iQ single-circuit power system—models 28F6070MWRD4SE,
28F6070MWHE4SE, and28F6070MWEL4SE—provides anintegrated power/data tray runningthrough the center of the base with an opening to accept an interlink iQsingle-circuit power system with twoAxil Z per/data center; specified sepa-rately. The power data tray is attachedto the H-frame, which replaces thebench end crossrail to attach the fixedend media wall to the bench.
Connections
Ganging connector, model28F22GCP, is specified separately tolink end media wall to a bench.
Flat-screen TV or monitor can bemounted to a Canopy screen. TV ormonitor should not exceed 60" diago-nal in size or 40 lbs. maximum. A fixedTV mount should be used with woodscreens not exceeding 5⁄8" projection.Tilt and full-motion TV mounts cannotbe mounted on a canopy screen.
End media wall cable manager,model 28A0326CM, is available tomount to canopy below TV to routecables from TV to optional equipmentshelf grommet.
Related Products
Cable management accessoriesfor benches and end units, includingcable trays and baskets, are available.➤See page 2.36.
Wood truss can be used on fixedframe.➤See page 2.18.
Canopy Kimball Benching
PlanningMeeting BoothCANOPY®
Height Adjust
Page 2.24
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Two canopy screens, model28F3043CAS, attach to the back ofeach seat frame; specified separately.
Meeting booth is a two-sided unitthat attaches to either end of a bench.One side features a sit-down meetingarea; the opposite side provides anheight-adjustable worksurface
Fixed frame worksurface is 271⁄2"diameter. No grommet or cut-outoptions are available.
Height-adjustable worksurface is281⁄4"D x 72"W.
Canopy screen, model28F7243CAS, mounts at the centerof the base frame with includedattachment brackets
Three canopies are required to complete the meeting booth. Theoverall height with canopies installedis 633⁄8".
Two upholstered seats are stan-dard with the meeting booth unit.They are installed onto an HPL platform with exposed plywoodedges.
Frame consists of a fixed side sup-porting the round top and seats andan height-adjustable frame on theopposite side.
Canopy Kimball Benching
Planning
continued
Meeting BoothCANOPY®
Height Adjust
Page 2.25
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Meeting booth frame consists of afixed side supporting the round topand seats, and an adjustable heightframe on the opposite side. The unitships knocked down, and cannot beused as a freestanding unit.
Each model includes:• Sit-to-stand base• Fixed base• One height-adjustable worksurface• One round fixed worksurface• Two seat platforms• Two seat cushions
IMPORTANT: Three canopies arerequired to complete the meetingbooth; each are specified separately,
Frame is available in 501 platinummetallic at no upcharge.
Adjustment range on height-adjustable worksurface is28"–421⁄2". Base is available in 501platinum metallic at no upcharge.
Worksurfaces have square edgesand are available in the same materials as the bench:• Thermally fused laminate (TFL) withvinyl or ply rim
• High-pressure laminate (HPL) withvinyl, ply rim or plywood edge
• Wood veneer with a wood rim• Plywood with exposed plywoodedge
Note: Finish for the round and rectan-gular worksurfaces will be the same.
Worksurface edge/rim profilesdiffer based on the top material selected. ➤See page 2.13.
Grain direction on worksurfacesruns with the width.
Factory-installed grommets andcut-outs in height-adjustable worksurface are available in pre-determined locations; upchargeapplies. ➤See pages 2.26–2.27.
Standard Programmable
One up/down switch control boxships standard with each table end.Programmable memory control switchwith four settings and display can bespecified separately to replace a stan-dard module. Both the standard andthe programmable switches can bemounted on the left or right side of theworksurface and are field installed.
Power options for meeting booth arethe same as offered on benches.
Meeting booth withoutpower/data tray—model28F7263MB1SE—provides a framewithout an integrated power/dataframe. Frame is open to the floor.
Meeting booth with power/datatray for use with Axil Z power/datacenter—model 28F7263MB2SE—provides integrated power/data trayrunning through the center of thebase with an opening to accept oneAxil Z power data center; specifiedseparately.
Meeting booth with power/datatray for use with for use with Interlink iQ single-circuit powersystem—model 28F7263MB4SE—provides an integrated power/datatray running through the center of thebase with an opening to accept aninterlink iQ single-circuit power systemwith two Axil Z per/data center; specified separately.
Glides are standard with a silvermetal top and black plastic base.They are 21⁄4" diameter and 1⁄2"H.Stem is 5⁄8" and leveling range is 1⁄4".If more leveling is required, a break inthe bench run may be necessary.
Connections
Ganging connector, model28F29GCP, is specified separately tolink meeting booth to bench.
Related Products
Cable management accessoriesfor benches and end units, includingcable trays and baskets, are available.➤See page 2.36.
Wood truss ➤See page 2.18.
Available Finishes
G1 Grommets:MB Matte BlackSL Silver
G19 Grommets:405 Designer White487 Brushed Nickel490 Polished Chrome501 Platinum Metallic514 Carbon Metallic544 Silver Pearl
How to Specify1 Insert the location and finish des-
ignator into model numbersequence as indicated on thepricing page.
Note: Specify grommet location and finish together in one step with-out a space between the locationand the finish designators. For example:G1CMB = G1 grommet, center,matte blackG19C501 = G19 center, right, platinum metallic
IMPORTANT: Only the grommet locations shown in the matrix at leftare available as standard.
Canopy Kimball Benching
Planning
For Benches, Ends, and Meeting Booths
Factory-Installed Worksurface Grommet OptionsCANOPY®
Height Adjust
Page 2.26
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
CenterDesignator Upcharge
G1 Plastic Grommets
Rectangular Worksurfaces on Bench* G1C +$186
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G1C +$93
G19 Metal Grommets
Rectangular Worksurfaces on Bench* G19C +$186
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G19C +$93
*When you specify a grommet option on a bench, you will receive the two of same grommet(s), one on each side of thebench.
Rectangular
41⁄8"Center
Note: All dimensions for grommets are measured from the center of the grommet to the worksurface edge.
Half-Round
41⁄8"Center
Half-Ellipse
41⁄8"Center
Ellipse
63⁄4"Center
Round
91⁄2"
Center
G1 plastic grommet is a two-pieceunit with snap-in lid. Lid cut-out slidesopen to route cables or can be closedwhen not in use.
G19 metal grommet is a two-pieceunit with black brush access. Toplocks in place.
23⁄4"
7⁄8" 21⁄4"dia. 7⁄8"23⁄8"
dia.
25⁄8"
How to Specify1 Insert the location designator into
model number sequence as indicated on the pricing page.
IMPORTANT: Only the cut-out locations shown in the matrix at leftare available as standard.
CenterDesignator Upcharge
C4 Cut-Out
Rectangular Worksurfaces on Bench* C4C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface C4C +$83
C6 Cut-Out
Rectangular Worksurfaces on Bench* C6C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface C6C +$83
G20 Cut-Out
Rectangular Worksurfaces on Bench* G20C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G20C +$83
G28 Cut-Out
Rectangular Worksurfaces on Bench* G28C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G28C +$83
C29 Cut-Out
Rectangular Worksurfaces on Bench* C29C +$166
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface C29C +$83
*When you specify a cut-out option on a bench, you will receive the two of same cut-out, one on each side of the bench.
Canopy Kimball Benching
Planning
For Benches, Ends, and Meeting Booths
Factory-Installed Worksurface Cut-Out OptionsCANOPY®
Height Adjust
Page 2.27
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Rectangular
23⁄4"Center
Note: All dimensions for cut-outs are measured from the back edge of the cut-out to the worksurface edge.
Half-Round
23⁄4"Center
Half-Ellipse
23⁄4"Center
Ellipse
63⁄4"Center
Round
C4 91⁄2"C6 8"
Center
C4 cut-outs are for use with:• Mho® retractable power/data centerwith 3 prong plug (KCEB2PDPSPC
• Mho retractable power/data/USBcenter with 3 prong plug(KCEB2PDUPSPC)
C6 cut-outs are for use with:• Node® power center (KCEBN20PP)• Node® power/USB center(KCEBN11PU)
G20 cut-outs are designed for usewith Ellora® power/data center(99KPDCAM).
G28 cut-outs are designed for usewith Ellora® power/USB/data center(45APDCS).
C29 cut-outs are designed for usewith Ashley Trio™ power/USB center (KCE0409ATSMWW).
Available Finishes
501 Platinum Metallic (no upcharge)
How to Specify
Note: Specify accessory frame loca-tion and finish together in one stepwithout a space between the loca-tion and the finish designators. For example:G34C501 = G34, center, platinummetallic finish
IMPORTANT: Only the accessory rail locations shown in the matrix at leftare available as standard.
CenterDesignator Upcharge
G34 Accessory Frame
Rectangular Worksurfaces on Bench* G34C +$272
Rectangular, Half-Round, Half-Ellipse, Ellipse, or Round Worksurface G34C +$136
*When you specify an accessory frame option on a bench, you will receive the two of same accessory frames, one oneach side of the bench.
Canopy Kimball Benching
Planning
For Benches, Ends, and Meeting Booths
Factory-Installed Accessory Frame OptionsCANOPY®
Height Adjust
Page 2.28
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Rectangular
23⁄4"Center
Note: All dimensions for accessory railare measured from the back edge of the cut-out to the worksurface edge.
Half-Round
23⁄4"Center
Half-Ellipse
23⁄4"Center
Ellipse
81⁄8"Center
Round
91⁄2"
Center
Accessory frames accommodateworksurface accessories. Frameopening is 35"W; any combination ofaccessories can be used up to amaximum of seven 5"W units (10"Wunits count for two units; 15"W unitscount for three units). Accessoriescan be specified to fill the entire spaceor partially to allow cables to exit theworksurface.➤See page 2.33 for product info.➤See page 2.74 to specify.
Perforated cable tray is recom-mended to organize cables below theworksurface.➤See page 2.33 for product info.➤See page 2.66 to specify.
Canopy Kimball Benching
Planning
Overview
ScreensCANOPY®
Height Adjust
Page 2.29
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Benches are specified with two screens, one for each user.Screen type can be the same on both sides or different. Screensare specified in the same width (60" or 72") as the bench. Selectfrom:• Fixed-height center screens• Fixed canopy screens• Worksurface privacy screens
Height-adjustable table ends with rectangular or half-roundworksurface are only available with a worksurface privacy screen.End worksurfaces are narrower to align the bench depth andrequire a 591⁄4"W screen.
End media wall with height-adjustable worksurface (round,half-eclipse, ellipse) are only available with one width (591⁄4") andheight (52") canopy. When mounted to the frame, the overallheight is 693⁄4" which is taller than the bench canopy.
Note: Fixed-height center screens and worksurface privacyscreens are not applicable to end media walls.
Meeting booth is only available with canopies. Available 30" and72" widths. Height aligns with bench canopy.
Note: Fixed-height privacy screens and center screens are not applicable to meeting booths.
Canopy offers a variety of screen types that can be used in combinations to provide varying degrees of privacy andfunctionality.
Canopy Kimball Benching
Planning
Fixed-Height Center Screens
ScreensCANOPY®
Height Adjust
Page 2.30
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Fixed-height center screens areavailable to mount on a bench frameonly. They should be specified in thesame width (60" or 72") as the bench.Center screens mount to the benchframe cross rail with brackets thatship with the screen. They are non-handed.
Two heights are available: 221⁄8" and361⁄4". Heights including mountingbrackets and overall height whenmounted on a bench are shownbelow.
221⁄8"H 361⁄4"HScreen Screen
With mountingbracket 251⁄16"H 391⁄4"H
Overall whenmounted onbench 441⁄2"H 565⁄8"H
Screens are 3⁄4" thick and rimmed onall four sides. Screen rims are offeredin the same rim options as worksur-faces. Screens are available in: • Thermally fused laminate (TFL),same on both sides; 2mm vinyl or1mm ply edge band
• High-pressure laminate (HPL), samelaminate on both sides; 2mm vinyl,1mm ply edge band, or exposedplywood edge
• Writable HPL; same on both sides(or with a contrasting HPL on theoutside); 2mm vinyl, 1mm ply edgeband, or exposed plywood edge
• Non-tackable felt is available on oneside of all screens
Edge/rim profiles differ based onthe screen material selected. ➤See page 2.13.
Vinyl rims can be specified in a contrasting color.
TFL and HPL woodgrain runs withwidth.
TFL and HPL screens are standardwith the same laminate on both sides.
Canopy Kimball Benching
Planning
Fixed Canopy Screens
ScreensCANOPY®
Height Adjust
Page 2.31
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Fixed canopy screens are availablefor bench, meeting booth, and endmedia wall. Canopies are specific toeach application.
Canopy screens are 3⁄4" and are onlyavailable with the exposed plywoodedge. Materials include:• High pressure laminate (HPL); samelaminate on both sides
• Writable laminate; same on bothsides or with a contrasting HPL onthe outside
• Non-tackable felt is available on theinside of curve
Canopies for a bench must bespecified in the same width (60" and72") as the bench. The height ofbench canopy is shorter than the endcanopy. Canopy mounts to the benchframe crossrail with brackets that shipwith the canopy.
43"HCanopy
With mounting bracket 46"H
Overall when mounted on bench 633⁄8"H
HPL woodgrain on canopy screenfor bench runs with width (horizontal) .
Canopy screen for end media wallwith height-adjustable worksur-face comes in one width (591⁄4"W).The height of end canopies are tallerthan the bench canopy. The canopymounts to the frame behind theequipment shelf. Attachment screwsship with the end media wall.Canopy is 52"H with an overall heightof 693⁄4" whenmounted on end mediawall with height-adjustable worksurface.
HPL woodgrain on canopy screenfor end media wall runs with height(vertical) due to the material size constraints.
Canopy screen for meeting boothcome in two widths (30" and 72"). Theheight of the canopy is the same over-all height (633⁄8"H) as the benchcanopy.
The 72" wide canopy that mountsto the central meeting boothframe is the same 72" wide canopyused on the bench. Attachmentbrackets ship with the canopy .
Meeting booth seat canopy is 30"wide. A quantity of two is required.The canopy mounts to the framebehind the seat cushion. Attachmentscrews ship with the meeting boothframe.
HPL woodgrain runs with width (horizontal) on canopies on meetingbooth.
Canopy Kimball Benching
Planning
Worksurface Privacy Screens
ScreensCANOPY®
Height Adjust
Page 2.32
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Worksurface privacy screensattach to a bench worksurface andheight-adjustable table end worksur-face. Screens are available in severalstyles, materials and rim options.
Screens are 3⁄4" thick and rimmed onall four sides. Screens are available in:• Thermally fused laminate (TFL),same on both sides; 2mm vinyl or1mm ply edge band
• High-pressure laminate (HPL), samelaminate on both sides; 2mm vinyl,1mm ply edge band, or exposedplywood edge
• Writable HPL; same on both sides(or with a contrasting HPL on theoutside); 2mm vinyl, 1mm ply edgeband, or exposed plywood edge
• Non-tackable felt is available on theuser side of TFL, HPL, and writablelaminate
Edge/rim profiles differ based onthe screen material selected. ➤See page 2.13.
Vinyl rims can be specified in a contrasting color.
TFL and HPL woodgrain runs withwidth (horizontal).
Mounting rail runs continuous widthof screen and has a 501 PlatinumMetallic finish.
Worksurface privacy screens are15"H. When mounted on a worksur-face, the exposed screen above theworksurface is 133⁄8". Screen mountsflush to the back of worksurface.Screens are specified in the samewidth as the bench or table end.
Bench cross rail covers must bespecified for each worksurface screento cover holes in crossrail that are visi-ble when not using a center screen orcanopy.
Worksurface privacy screens withaccessory rail are for use with dedi-cated accessories, which be can beused in any combination along therail. Accessory rail screens are avail-able in all material options with theexception of felt.
Accessory rail sits flush with thescreen surface. The rail is 12" high andis narrower than the screen widthapproximately 43⁄8" on each side.591⁄4" and 60" screen rail width is511⁄4". 72" screen rail width is 631⁄4".Rail is painted 501 Platinum Metallicfinish.
Six accessories are available in allpaint colors to accent workspaces.
Worksurface privacy screens withbungee cords provide a versatileboard to display photos and projectinspiration ideas. Items tuck betweenwebbing without the need of a pin ormagnet. Bungee screens are availablein all material options with the excep-tion of writable laminate and felt. Thebungee cord is a white cord withblack flecks. The eyelets that attachcords to the screen are silver. Cordsare woven under and over each otherto creat the web design.
Canopy Kimball Benching
PlanningWorksurface AccessoriesCANOPY®
Height Adjust
Page 2.33
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Benches with a factory-installedG34C accessory frame will accommodate a variety of dedicatedaccessory options.➤See page 2.34 for dual and singleM/Flex monitor arms.
Accessory frame is an aluminumframe with opening 35"W x 21/2"Dand only available in 501 PlatinumMetallic. Any combination of acces-sories can be used up to a maximumof seven 5"W units (10"W units countfor two units: 15"W units count forthree units). Accessories can be spec-ified to fill the entire space or partiallyto allow cables to be routed to theunderside of the surface in openareas.
Perforated cable tray is designed tobe used specifically with the acces-sory frame to organize cables beneaththe worksurface. It mounts directlybeneath the accessory frame. Avail-able in all paint colors.
Six work tools are available to helporganize desktop. Available in all paintcolors to accent workspaces; markerholders is available in Designer Whitewritable paint.
Mounting plate can be specifiedseparately to install a Perks SaltKCE02SUSM or Pepper KCE02PPSMunit (sold separately) to bring desktoppower to the worksurface. The open-ing is 13/4" in diameter can also beused alone for cords to exit to theunderside of the worksurface. Available in all paint colors.
Perks trackless keyboard kit(model 99K1806KAT) can be installedon the user side of worksurfaces witha suggested clearance of 93⁄8" fromthe front of edge of the worksurface.➤See the Perks chapter of the Kimball Desks & Accessories Price List.
Personal task light features an artic-ulating fixture head with single touchon/off button located next to the LEDlens. Spring tension providesadjustable positioning of the arm.Light output is 350 lumens, color tem-perature of 3900K, with color render-ing index of 80. LED rated lifespan isgreater than 20,000 hours. Powersupply is 6-watt wall transformer with4’11” black cord. UL Listed. Mountingplate available in all paint colors shipsstandard to mount light in accessoryframe. Task light is not freestanding.
Canopy Kimball Benching
Planning
Single and Dual M/Flex Monitor Arms
Worksurface AccessoriesCANOPY®
Height Adjust
Page 2.34
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Monitor arms are designed specifi-cally for installation into the G34Accessory frame.
Single
Dual
Single and dual M/Flex modelsfeature a center post with twoadjustable cable management clips atthe base of pole.
Monitor arms in this collection arethe M2 dynamic arm assembly whichfeatures 4D adjustment. Each armadjusts in and out, up and down,swiveling left and right, and tiltingback and forward.
Monitors up to 20 lbs. can beaccommodated:• Single monitor arm supports onemonitor 4-20 lbs.
• Dual monitor supports two monitors4-20 lbs. each. Each arm adjustsindependently of the other for thegreatest versatility.
100mm x 100mm VESA plates arestandard. A 75mm x 75mm plate canbe accommodated. The standardVESA plates are not compatible withApple monitors.➤Contact Apple Computer directly topurchase an appropriate VESA plateseparately.
Connections
Monitor arms ship with mountingplate that fits into the G34 accessoryframe and is additionally secured tothe underside of the worksurface. Themounting plate is available in all paintcolors. The G34 grommet option onthe worksurface must be specified touse these monitor arms. See page forother Perks monitor arm options tortops without the G34 accessoryframe.
Planning Factors
When installing a monitor armwith a Bench canopy screen, themonitor arm will need to be used inthe lowest position to assure that thescreen does not conflict with thecanopy arch when the table is in thehighest position.
Canopy Kimball Benching
Planning
Perks® Monitor Arms
Worksurface AccessoriesCANOPY®
Height Adjust
Page 2.35
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Details
Canopy will accommodate Perksgrommet/bolt-through mount monitors arms.➤See the Perks chapter in the KimballDesks & Accessories Price List tospecify.
Monitor arms in this collectionfeature 4D adjustment, adjusting inand out, up and down, swiveling leftand right, and tilting back and forward.
Arm with integrated cable management reach is 20" on single models and 22" on dual cross-bar models. Height adjustment rangeis 12" on single models and 111⁄2" ondual crossbar models.
Monitors up to 151⁄2 lbs. can beaccommodated: • Single model supports one monitorbetween 5–151⁄2 lbs.
• Dual crossbar model supports twomonitors up to 121⁄2 lbs. each.Note: Dual-arm crossbar monitorsmust have two monitors attached atall times for balance.
100mm x 100mm VESA plates arestandard. A 75mm x 75mm plate canbe accommodated. The standardVESA plates are not compatible withApple monitors.➤Contact Apple Computer directly topurchase an appropriate VESA plateseparately.
Connections
Grommet/bolt-through models canbe used in holes up to 2.3" in diame-ter. They cannot be placed over apedestal, modesty panel, or supportpanel. They can be used with 13⁄16" or19⁄16" worksurfaces. Bolt-throughapplication can utilize a hole as smallas 1⁄2" in the surface. ➤Refer to assembly instructions atwww.kimball.com.\
Planning Factors
IMPORTANT: Monitor mounts arespecific to arm style and are not areinterchangeable between single anddual monitor applications.
For grommet/bolt through models,be careful to install so as not to inter-fere with the height-adjustable baseframe, modesty panels, screen, or cutouts that are attached to the worksur-face.When installing a monitor armwith a Bench canopy screen, themonitor arm will need to be used inthe lowest position to assure that thescreen does not conflict with thecanopy arch when the table is in thehighest position.
When installing a monitor armwith a Bench canopy screen, themonitor arm will need to be used inthe lowest position to assure that thescreen does not conflict with thecanopy arch when the table is in thehighest position.
Clamp-mount monitor arms arenot compatible wtih Canopy.
Single99KSMAM2GMS
Dual Crossbar99KSMACBM8GMS
Canopy Kimball Benching
PlanningCable ManagementCANOPY®
Height Adjust
Page 2.36
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Canopy provides several cablemanagement accessories that aredesigned for use on benches, tableends, all end media wall units andmeeting booth.
Cables must be routed to the under-side of the worksurface through a G1or G19 grommet or G34 accessoryframe for benches with screens.
IMPORTANT: Cables cannot berouted between the worksurface andfixed-height privacy, center, or canopyscreens. Even though a 5/16" gap willexist between a center or canopyscreen and the worksurface; cablescannot pass between.
J-hooks are standard in all benchand end unit power/data trays andganging connectors. They providesupport for power in-feeds, andcables that run in the recessed centerare connecting power between units.Quantity of J-hooks varies with thelength of tray.
Plastic cable carrier guides cablesfrom the worksurface to the powersource, preventing kinks in the cablesas the worksurface moves. The topscrews to the underside of the work-surface and can lay in the power/datatray or be secured with provided high-strength magnets. The carrier features1/2" x 1/2" openings on the inside toslip cords into each opening whichaccommodates one 1/4" cord andone data cable per side. Links in thecarrier can be removed to adjust tothe desired length. Carrier can also be installed using the magnets to the column leg below the tray on allbench frames to manage powercords from the power data/tray to a floor or wall outlet.
Perforated cable tray is designed tobe used specifically with the G34Caccessory frame to organize cablesbeneath the worksurface. Threeopenings in the bottom of the tray allow the plastic cable carrier (purchased separately) to organizecables to the power/data tray. Magnets supplied with the cable carrier secure to the inside of perforated cable tray.
Cable basket secures power anddata cables neatly to the underside ofa worksurface. It is available in twowidths and is installed on either sideof the table frame. It can be used withall grommets and cut-outs, includingthe G34C accessory frame.
Canopy Kimball Benching
Standard Includes
• Bench frame• Two worksurfaces• Two electric height-adjustablemechanisms with control box
• Two standard up/down controlswitches
• Two 6' power cords
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile (omit for plywood (D,
LD2, MD2): P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Surface finish price group (include
for HPL (L), HPL with ply rim (LD),and wood (W) models only):STD = Group 1
STD2 = Group 2 (+20%)6 Surface finish designator7 Rim finish designator (omit for
wood (W) and plywood (D, LD2,MD2) models
8 Paint designator: 501 = Platinum metallic (no
upcharge)
Without Power/Data Tray
Bench 1CANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Ganging connector, model28F29GCP, may be specified to linkbench to bench.➤See page 2.40 to specify.
Page 2.37
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Tops591⁄4" 60" 28"–421⁄2" 28F6060BNRT1SE $7034 $7098 $7387 $7462 $8984
591⁄4" 72" 28"–421⁄2" 28F7260BNRT1SE 7237 7300 7574 7628 9471
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Tops591⁄4" 60" 28"–421⁄2" 28F6060BNRT1SE $7467 $7540 $9080 $8102 $10051
591⁄4" 72" 28"–421⁄2" 28F7260BNRT1SE 7643 7711 9574 8419 10602
Canopy Kimball Benching
Standard Includes
• Bench frame• Two worksurfaces• Two electric height-adjustablemechanisms with control box
• Two standard up/down controlswitches
• Two 6' power cords• Power/data tray
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile (omit for plywood (D,
LD2, MD2): P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Surface finish price group (include
for HPL (L), HPL with ply rim (LD),and wood (W) models only):STD = Group 1
STD2 = Group 2 (+20%)6 Surface finish designator7 Rim finish designator (omit for
wood (W) and plywood (D, LD2,MD2) models
8 Paint designator: 501 = Platinum metallic (no
upcharge)
With Power/Data Tray for Use with Axil Z Power/Data Center
Bench 2CANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.38
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Tops591⁄4" 60" 28"–421⁄2" 28F6060BNRT2SE $7663 $7727 $8016 $8090 $9610
591⁄4" 72" 28"–421⁄2" 28F7260BNRT2SE 7936 7999 8260 8326 10171
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Tops591⁄4" 60" 28"–421⁄2" 28F6060BNRT2SE $8096 $8169 $9707 $8729 $10677
591⁄4" 72" 28"–421⁄2" 28F7260BNRT2SE 8343 8409 10273 9119 11301
Ganging connector, model28F29GCP, may be specified to linkbench to bench.➤See page 2.40 to specify.
Canopy Kimball Benching
Standard Includes
• Bench frame• Two worksurfaces• Two electric height-adjustablemechanisms with control box
• Two standard up/down controlswitches
• Two 6' power cords• Power/data tray
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile (omit for plywood (D,
LD2, MD2): P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Surface finish price group (include
for HPL (L), HPL with ply rim (LD),and wood (W) models only):STD = Group 1
STD2 = Group 2 (+20%)6 Surface finish designator7 Rim finish designator (omit for
wood (W) and plywood (D, LD2,MD2) models
8 Paint designator: 501 = Platinum metallic (no
upcharge)
With Power/Data Tray for Use with Interlink iQ Single-Circuit Power System
Bench 4CANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.39
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Tops591⁄4" 60" 28"–421⁄2" 28F6060BNRT4SE $7663 $7731 $8016 $8090 $9610
591⁄4" 72" 28"–421⁄2" 28F7260BNRT4SE 7936 7999 8260 8326 10171
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Tops591⁄4" 60" 28"–421⁄2" 28F6060BNRT4SE $8096 $8169 $9707 $8729 $10677
591⁄4" 72" 28"–421⁄2" 28F7260BNRT4SE 8343 8409 10273 9119 11301
Ganging connector, model28F29GCP, may be specified to linkbench to bench.➤See page 2.40 to specify.
Canopy Kimball Benching
Standard Includes
• Attachment hardware
How to Specify
Bench Crossrail Hole Covers! Model2 Paint designator 501 = Platinum metallic (no
upcharge)
Programmable Control Switch! Model
Ganging Connector! Model2 Paint designator: 501 = Platinum metallic
(no upcharge)
Wood Truss! Model2 Finish price group color (omit for
paint): STD = Group 13 Finish designator
Bench and End Media Wall AccessoriesCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.40
PricingCANOPY®
Height Adjust
D W H Model Price
Bench Crossrail Covers (set of 2) 28FBCCSP $313
Programmable Memory Control Switch (black)11⁄2" 41⁄8" 3⁄4" 45FPROGS $122
Ganging ConnectorFor End Media Wall with Height-Adjustable Worksurface
16" 221⁄2" 11⁄4" 28F22GCP $211
For Bench-to-Bench and Meeting-Booth-to-Bench Connections
16" 281⁄2" 11⁄4" 28F29GCP $287
Wood TrussPaint Finish
28F14WTP $315
Wood Finish
28F14WTW $315
IMPORTANT: Specify two program-mable memory control switches(45FPROGS) for each bench model;one for each worksurface.
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Rectangular worksurface• Height-adjustable frame• Standard up/down control switch• H-frame to connect to bench
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Surface finish price group:
STD = Group 1 STD2 = Group 2 (+20%)6 Surface finish designator7 Rim finish designator:8 Paint designator 501 = Platinum metallic (no
upcharge)
Rectangular Height-Adjustable Worksurface
Table End for BenchStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.41
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL WorksurfaceWithout Power/Data Tray
281⁄4" 591⁄4" 28""–421⁄2" 28F3060BNERT1SE $2845 $2881 $2979 $3016 $4590
With Power/Data Tray; For Use with Axil Z Power/Data Center
281⁄4" 591⁄4" 28""–421⁄2" 28F3060BNERT2SE $3215 $3249 $3349 $3384 $4959
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
281⁄4" 591⁄4" 28""–421⁄2" 28F3060BNERT4SE $3215 $3249 $3349 $3384 $4959
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood WorksurfaceWithout Power/Data Tray
281⁄4" 591⁄4" 28""–421⁄2" 28F3060BNERT1SE $3019 $3053 $4742 $4146 $5122
With Power/Data Tray; For Use with Axil Z Power/Data Center
281⁄4" 591⁄4" 28"–421⁄2" 28F3060BNERT2SE $3387 $3423 $5112 $4517 $5491
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
281⁄4" 591⁄4" 28"–421⁄2" 28F3060BNERT4SE $3387 $3423 $5112 $4517 $5491
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Half-round worksurface• Height-adjustable frame• Standard up/down control switch• H-frame to connect to bench
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Surface finish price group:
STD = Group 1 STD2 = Group 2 (+20%)6 Surface finish designator7 Rim finish designator:8 Paint designator 501 = Platinum metallic (no
upcharge)
Half-Round Height-Adjustable Worksurface
Table End for BenchStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.42
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL WorksurfaceWithout Power/Data Tray
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR1SE $3114 $3140 $3595 $3624 $5485
With Power/Data Tray; For Use with Axil Z Power/Data Center
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR2SE $3484 $3509 $3964 $3994 $5854
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR4SE $3484 $3509 $3865 $3994 $5854
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood WorksurfaceWithout Power/Data Tray
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR1SE $3629 $3669 $5999 $4961 $6220
With Power/Data Tray; For Use with Axil Z Power/Data Center
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR2SE $3999 $4038 $6367 $5330 $6589
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
291⁄4" 591⁄4" 28"–421⁄2" 28F3060BNEHR4SE $3999 $4038 $6367 $5330 $6589
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Canopy• Equipment shelf• Fixed frame with H-frame to attachto the bench end
• Hardware
How to Specify! Model@ Canopy material: LD2 = HPL on both sides FLD2 = Felt on inside curve,
HPL outside MD2 = Writable laminate on
both sides FMD2 = Felt on inside curve,
writable laminate on outsidecurve
MLD2 = Writable laminate oninside curve, HPL on outsidecurve
3 Felt color designator, if applicable
4 HPL or writable laminatefinish designator
5 Center grommet for equipmentshelf:
G19C = Center grommet (+$93) X = No grommet6 Equipment shelf HPL finish
designator7 Paint designator: 501 = Platinum metallic (no
upcharge)
HPL, Felt, and Writable Laminate
Fixed End Media Wall for BenchStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.43
HPL/ Felt/ Writable Felt/ Writable/ HPL HPL Laminate Writable HPLD W H Model (LD2) (FLD2) (MD2) (FMD2) (MLD2)
Without Power/Data Tray15" 591⁄4" 697⁄8" 28F6070MWBEF1 $8213 $9508 $8722 $9814 $8435
With Power/Data Tray; For Use with Axil Z Power/Data Center15" 591⁄4" 697⁄8" 28F6070MWBEF2 $8469 $9764 $8978 $10070 $8691
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System15" 591⁄4" 697⁄8" 28F6070MWBEF4 $8469 $9764 $8978 $10070 $8691
For model 28F6070MWBEF2, specifyone Axil Z power center (model45F0214EAXZPDB) separately.➤See page 2.67.
For model 28F6070MWBEF4, specifypower harness with one Axil Z powercenter for use with fixed end mediawall (model 28AIAXZPD1B) separately.➤See page 2.68.
Canopy Kimball Benching
Standard Includes
• Canopy• Shelf with upholstered cushion• Fixed frame with H-frame to attachto the bench end
• Hardware
How to Specify! Model@ Canopy material: LD2 = HPL on both sides FLD2 = Felt on inside curve,
HPL on outside curve MD2 = Writable laminate on
both sides FMD2 = Felt on inside curve,
writable laminate on outsidecurve
MLD2 = Writable laminate oninside curve, HPL on outsidecurve
3 Felt color designator, if applicable, for canopy
4 HPL or writable laminatefinish designator for canopy
5 Shelf HPL finish designator6 Cushion fabric grade7 Cushion fabric color8 Paint designator: 501 = Platinum metallic (no
upcharge)
Fixed End Seat for BenchStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.44
PricingCANOPY®
Height Adjust
Cushion attaches to HPL shelf.
Cushion fabric is applied railroad (horizontal) fashion.
Seating HPL/ Felt/ Writable Felt/ Writable/ Fabric HPL HPL Laminate Writable HPLD W H Model Grade (LD2) (FLD2) (MD2) (FMD2) (MLD2)
193⁄4" 591⁄4" 697⁄8" 28F6070SBEF 1 $9102 $10398 $9626 $10718 $9339 2 9168 10464 9692 10784 9405 3 9206 10502 9730 10822 9443 4 9250 10546 9774 10866 9487 5 9311 10607 9835 10927 9548 6 9373 10669 9897 10989 9610 7 9435 10731 9959 11051 9672
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Round worksurface• Height-adjustable frame• Standard up/down control switch• Equipment shelf
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%)6 Worksurface finish designator7 Worksurface rim finish designator:8 Center grommet for equipment
shelf: G19C = Center grommet (+$93)
X = No grommet9 Equipment shelf HPL designatorbl Paint designator 501 = Platinum metallic (no
upcharge)
Round Height-Adjustable Worksurface
End Media Wall for Bench
GSA Contract Pending
Page 2.45
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL WorksurfaceWithout Power/Data Tray
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD1SE $5452 $5660 $5788 $6031 $7342
With Power/Data Tray; For Use with Axil Z Power/Data Center
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD2SE $5798 $6006 $6134 $6379 $7690
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD4SE $5798 $6006 $6134 $6379 $7690
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood WorksurfaceWithout Power/Data Tray
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD1SE $5902 $6159 $7543 $6819 $7769
With Power/Data Tray; For Use with Axil Z Power/Data Center
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD2SE $6256 $6507 $7889 $7166 $8127
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWRD4SE $6256 $6507 $7889 $7166 $8127
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Ganging connector, model28F22GCP, may be specified to linkend media wall with worksurface tobench.➤See page 2.40 to specify.
This unit must be used with acanopy. Order model 28F6052CASEseparately.➤See planning pages for details.➤See page 2.58 to specify.
Canopy Kimball Benching
Half-Ellipse Height-Adjustable Worksurface
End Media Wall for BenchCANOPYHeight Adjust
GSA Contract Pending
Page 2.46
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL WorksurfaceWithout Power/Data Tray
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE1SE $5452 $5660 $5788 $6031 $7342
With Power/Data Tray; For Use with Axil Z Power/Data Center
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE2SE 5798 6006 6134 6379 7690
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE4SE 5798 6006 6134 6379 7690
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood WorksurfaceWithout Power/Data Tray
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE1SE $5902 $6159 $7543 $6819 $7769
With Power/Data Tray; For Use with Axil Z Power/Data Center
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE2SE 6256 6507 7889 7166 8127
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWHE4SE 6256 6507 7889 7166 8127
Standard Includes
• Half-ellipse worksurface• Height-adjustable frame• Standard up/down control switch• Equipment shelf
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%)6 Worksurface finish designator7 Worksurface rim finish designator:8 Center grommet for equipment
shelf: G19C = Center grommet (+$93) X = No grommet9 Equipment shelf HPL designatorbl Paint designator 501 = Platinum metallic (no
upcharge)
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Ganging connector, model28F22GCP, may be specified to linkend media wall with worksurface tobench.➤See page 2.40 to specify.
This unit must be used with acanopy. Order model 28F6052CASEseparately.➤See planning pages for details.➤See page 2.58 to specify.
Canopy Kimball Benching
Ellipse Height-Adjustable Worksurface
End Media Wall for BenchCANOPYHeight Adjust
GSA Contract Pending
Page 2.47
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL WorksurfaceWithout Power/Data Tray
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL1SE $5452 $5660 $5788 $6031 $7342
With Power/Data Tray; For Use with Axil Z Power/Data Center
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL2SE 5798 6006 6134 6379 7690
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL4SE 5798 6006 6134 6379 7690
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood WorksurfaceWithout Power/Data Tray
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL1SE $5902 $6159 $7543 $6819 $7769
With Power/Data Tray; For Use with Axil Z Power/Data Center
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL2SE 6256 6507 7889 7166 8127
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWEL4SE 6256 6507 7889 7166 8127
Standard Includes
• Ellipse worksurface• Height-adjustable frame• Standard up/down control switch• Equipment shelf
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%)6 Worksurface finish designator7 Worksurface rim finish designator:8 Center grommet for equipment
shelf: G19C = Center grommet (+$93)
X = No grommet9 Equipment shelf HPL designatorbl Paint designator 501 = Platinum metallic (no
upcharge)
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Ganging connector, model28F22GCP, may be specified to linkend media wall with worksurface tobench.➤See page 2.40 to specify.
This unit must be used with acanopy. Order model 28F6052CASEseparately.➤See planning pages for details.➤See page 2.58 to specify.
Standard Includes
• Round worksurface• Height-adjustable freestandingframe
• Standard up/down control switch• Equipment shelf
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%)6 Worksurface finish designator7 Worksurface rim finish designator:8 Center grommet for equipment
shelf: G19C = Center grommet (+$93)
X = No grommet9 Equipment shelf HPL designatorbl Paint designator 501 = Platinum metallic (no
upcharge)
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL WorksurfaceWithout Power/Data Tray
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD1SE $6594 $6802 $6930 $7173 $8484
With Power/Data Tray; For Use with Axil Z Power/Data Center
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD2SE $6940 $7148 $7276 $7520 $8832
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD4SE $6940 $7148 $7276 $7520 $8832
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood WorksurfaceWithout Power/Data Tray
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD1SE $7044 $7301 $8685 $7961 $8911
With Power/Data Tray; For Use with Axil Z Power/Data Center
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD2SE $7396 $7648 $9031 $8308 $9267
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
591⁄8" 591⁄4" 28"–421⁄2" 28F6070MWFRD4SE $7396 $7648 $9031 $8308 $9267
This unit must be used with acanopy. Order model 28F6052CASEseparately.➤See planning pages for details.➤See page 2.58 to specify.
Canopy Kimball Benching
Pricing
Round Height-Adjustable Worksurface
Freestanding End Media WallCANOPY®
Height Adjust
Page 2.48
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Half-Ellipse Height-Adjustable Worksurface GSA Contract Pending
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL WorksurfaceWithout Power/Data Tray
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE1SE $6594 $6802 $6930 $7173 $8484
With Power/Data Tray; For Use with Axil Z Power/Data Center
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE2SE 6940 7148 7276 7520 8832
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE4SE 6940 7148 7276 7520 8832
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood WorksurfaceWithout Power/Data Tray
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE1SE $7044 $7301 $8685 $7961 $8911
With Power/Data Tray; For Use with Axil Z Power/Data Center
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE2SE 7396 7648 9031 8308 9267
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
611⁄4" 591⁄8" 28"–421⁄2" 28F6070MWFHE4SE 7396 7648 9031 8308 9267
Standard Includes
• Half-ellipse worksurface• Height-adjustable freestandingframe
• Standard up/down control switch• Equipment shelf
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%)6 Worksurface finish designator7 Worksurface rim finish designator:8 Center grommet for equipment
shelf: G19C = Center grommet (+$93) X = No grommet9 Equipment shelf HPL designatorbl Paint designator 501 = Platinum metallic (no
upcharge)
This unit must be used with acanopy. Order model 28F6052CASEseparately.➤See planning pages for details.➤See page 2.58 to specify.
Canopy Kimball Benching
PricingFreestanding End Media WallCANOPY®
Height Adjust
Page 2.49
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
GSA Contract Pending
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL WorksurfaceWithout Power/Data Tray
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL1SE $6594 $6802 $6930 $7173 $8484
With Power/Data Tray; For Use with Axil Z Power/Data Center
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL2SE 6940 7148 7276 7520 8832
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL4SE 6940 7148 7276 7520 8832
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood WorksurfaceWithout Power/Data Tray
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL1SE $7044 $7301 $8685 $7961 $8911
With Power/Data Tray; For Use with Axil Z Power/Data Center
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL2SE 7396 7648 9031 8308 9267
With Power/Data Tray; For Use with Interlink iQ Single-Circuit Power System
541⁄4" 591⁄4" 28"–421⁄2" 28F6070MWFEL4SE 7396 7648 9031 8308 9267
Standard Includes
• Ellipse worksurface• Height-adjustable freestandingframe
• Standard up/down control switch• Equipment shelf
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option:
X = None ➤See pages 2.26–2.28 for
designators.5 Worksurface finish price group:
STD = Group 1 STD2 = Group 2 (+20%)6 Worksurface finish designator7 Worksurface rim finish designator:8 Center grommet for equipment
shelf: G19C = Center grommet (+$93)
X = No grommet9 Equipment shelf HPL designatorbl Paint designator 501 = Platinum metallic (no
upcharge)
This unit must be used with acanopy. Order model 28F6052CASEseparately.➤See planning pages for details.➤See page 2.58 to specify.
Canopy Kimball Benching
Pricing
Ellipse Height-Adjustable Worksurface
Freestanding End Media WallCANOPY®
Height Adjust
Page 2.50
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Canopy Kimball Benching
Standard Includes
• One height-adjustable rectangularworksurface with standardup/down control switch
• One round fixed-height worksurface
• Frame• Bench cushions
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option for
rectangular worksurface:X = None
➤See pages 2.26–2.28 for designators.
5 Worksurface finish price group:STD = Group 1
STD2 = Group 2 (+20%)6 Worksurface finish designator7 Worksurface rim finish designator:8 Shelf HPL designator9 Cushion fabric gradebl Cushion fabric colorbm Paint designator 501 = Platinum metallic (no
upcharge)
Meeting Booth for BenchCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.51
PricingCANOPY®
Height Adjust
TFL HPL Seating Vinyl Ply Vinyl Ply Plywood Fabric Rim Rim Rim Rim EdgeD W H Model Grade (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL 591⁄2" 72" 28"–421⁄2" 28F7263MB1SE 1 $7069 $7131 $7391 $7459 $9304 2 7108 7170 7430 7498 9343 3 7131 7193 7453 7521 9366 4 7156 7218 7478 7546 9391 5 7192 7254 7514 7582 9427 6 7229 7291 7551 7619 9464 7 7266 7328 7588 7656 9501
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood 591⁄2" 72" 28"–421⁄2" 28F7263MB1SE 1 $7474 $7541 $9406 $8252 $10433 2 7513 7580 9445 8291 10472 3 7536 7603 9468 8314 10495 4 7561 7628 9493 8339 10520 5 7597 7664 9529 8375 10556 6 7634 7701 9566 8412 10593 7 7671 7738 9603 8449 10630
This unit must be attached to abench. Order ganging connectormodel 28F29GCP separately.➤See page 2.40 to specify.
Cushion fabric is applied railroad(horizontal) fashion.
This unit must be used with acanopy. Order one 28F7243CASand two 28F3043CAS models.➤See planning pages for details.➤See page 2.58 to specify.
Canopy Kimball Benching
Standard Includes
• One height-adjustable rectangularworksurface
• One round fixed-height worksurface
• Frame• Power/data tray• Bench cushions
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option for
rectangular worksurface:X = None
➤See pages 2.26–2.28 for designators.
5 Worksurface finish price group:STD = Group 1
STD2 = Group 2 (+20%)6 Worksurface finish designator7 Worksurface rim finish designator:8 Shelf HPL designator9 Cushion fabric gradebl Cushion fabric colorbm Paint designator 501 = Platinum metallic (no
upcharge)
For Use with Axil Z Power/Data Center
Meeting Booth for Bench with Power/Data TrayCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
TFL HPL Seating Vinyl Ply Vinyl Ply Plywood Fabric Rim Rim Rim Rim EdgeD W H Model Grade (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL 591⁄2" 72" 28"–421⁄2" 28F7263MB2SE 1 $7363 $7426 $7686 $7753 $9598 2 7402 7465 7725 7792 9637 3 7425 7488 7748 7815 9660 4 7450 7513 7773 7840 9685 5 7486 7549 7809 7876 9721 6 7523 7586 7846 7913 9758 7 7560 7623 7883 7950 9795
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood 591⁄2" 72" 28"–421⁄2" 28F7263MB2SE 1 $7769 $7835 $9699 $8546 $10728 2 7808 7874 9738 8585 10767 3 7831 7897 9761 8608 10790 4 7856 7922 9786 8633 10815 5 7892 7958 9822 8669 10851 6 7929 7995 9859 8706 10888 7 7966 8032 9896 8743 10925
Page 2.52
PricingCANOPY®
Height Adjust
This unit must be attached to abench. Order ganging connectormodel 28F29GCP separately.➤See page 2.40 to specify.
Cushion fabric is applied railroad(horizontal) fashion.
This unit must be used with acanopy. Order one 28F7243CASand two 28F3043CAS models.➤See planning pages for details.➤See page 2.58 to specify.
Canopy Kimball Benching
Standard Includes
• One height-adjustable rectangularworksurface
• One round fixed-height worksurface
• Frame• Power/data tray• Bench cushions
How to Specify! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Grommet/cut-out option for
rectangular worksurface:X = None
➤See pages 2.26–2.28 for designators.
5 Worksurface finish price group:STD = Group 1
STD2 = Group 2 (+20%)6 Worksurface finish designator7 Worksurface rim finish designator:8 Shelf HPL designator9 Cushion fabric gradebl Cushion fabric colorbm Paint designator 501 = Platinum metallic (no
upcharge)
For Use with Interlink iQ Single-Circuit Power System
Meeting Booth for Bench with Power/Data TrayCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
TFL HPL Seating Vinyl Ply Vinyl Ply Plywood Fabric Rim Rim Rim Rim EdgeD W H Model Grade (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL 591⁄2" 72" 28"–421⁄2" 28F7263MB4SE 1 $7363 $7426 $7686 $7753 $9598 2 7402 7465 7725 7792 9637 3 7425 7488 7748 7815 9660 4 7450 7513 7773 7840 9685 5 7486 7549 7809 7876 9721 6 7523 7586 7846 7913 9758 7 7560 7623 7883 7950 9795
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood 591⁄2" 72" 28"–421⁄2" 28F7263MB4SE 1 $7769 $7835 $9699 $8546 $10728 2 7808 7874 9738 8585 10767 3 7831 7897 9761 8608 10790 4 7856 7922 9786 8633 10815 5 7892 7958 9822 8669 10851 6 7929 7995 9859 8706 10888 7 7966 8032 9896 8743 10925
Page 2.53
PricingCANOPY®
Height Adjust
This unit must be attached to abench. Order ganging connectormodel 28F29GCP separately.➤See page 2.40 to specify.
Cushion fabric is applied railroad(horizontal) fashion.
This unit must be used with acanopy. Order one 28F7243CASand two 28F3043CAS models.➤See planning pages for details.➤See page 2.58 to specify.
Canopy Kimball Benching
Standard Includes
• Base• Mounting hardware
How to Specify
Top! Model@ Material/rim material: LL = TFL with vinyl rim LLD = TFL with ply rim L = HPL with vinyl rim LD = HPL with ply rim LD2 = HPL with plywood edge M = Writable lam. with vinyl rim MD = Writable lam. with ply rim MD2 = Writable lam. with
plywood rimW = Wood with wood rim
D = Plywood with self edge3 Rim profile: P = Softened vinyl rim (LL, L, M) E = Flat ply rim (LLD, LD, MD) F = Softened wood rim (W)4 Surface finish price group:
STD = Group 1 STD2 = Group 2 (+20%)5 Surface finish designator6 Rim finish designator
Pneumatic Base! Model2 Finish:
405 = Designer White 425 = Shadow 462 = Cinder 501 = Platinum Metallic (+10%)
514 = Carbon Metallic (+10%)544 = Silver Pearl (+10%)
Tops and Pneumatic BaseCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
† GSA SIN 711-2
Page 2.54
PricingCANOPY®
Height Adjust
TFL HPL Vinyl Ply Vinyl Ply Plywood Rim Rim Rim Rim EdgeD W H Model (LL) (LLD) (L) (LD) (LD2)
With TFL or HPL Round Top
42" diameter 3⁄4" 28W42RD $601 $649 $873 $942 $1657
Rectangular Top
24" 42" 3⁄4" 28W2442RT $402 $439 $479 $526 $924
Writable Laminate Wood Plywood Vinyl Ply Plywood Wood Self Rim RIm Edge Rim EdgeD W H Model (M) (MD) (MD2) (W) (D)
With Writable Laminate, Wood, or Plywood Round Top
42" diameter 3⁄4" 28W42RD $899 $970 $1713 $1338 $1747
Rectangular Top
24" 42" 3⁄4" 28W2442RT $491 $952 $542 $658 $1041
D W H Model Price
Priority Height-Adjustable Pneumatic Square Base24" 24" 26" –42" 53K2626BSGMP † $3110
Canopy Kimball Benching
Standard Includes
• Screen• Attachment hardware
How to Specify! Model@ Material/rim material: LL = TFL both sides, vinyl edge LLD = TFL both sides, ply edge FLL = Felt one side, TFL one
side, vinyl edge FLLD = Felt one side, TFL one
side, ply edge3 Felt color designator, if
applicable4 TFL finish designator (same both
sides)5 Vinyl edge finish designator, if
applicable
TFL
Fixed-Height Center ScreensCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.55
PricingCANOPY®
Height Adjust
Screen width must be the same widthas the bench.
TFL/TFL Vinyl Ply Rim RimD W H Model (LL) (LLD)
TFL on Both Sides3⁄4" 60" 221⁄8" 28F6022CS $552 $596 3⁄4" 72" 221⁄8" 28F7222CS 590 6363⁄4" 60" 361⁄4" 28F6036CS 690 744 3⁄4" 72" 361⁄4" 28F7236CS 799 862
Felt/TFL Vinyl Ply Rim RimD W H Model (FLL) (FLLD)
Felt on One Side, TFL on One Side3⁄4" 60" 221⁄8" 28F6022CS $1224 $1268 3⁄4" 72" 221⁄8" 28F7222CS 1262 13083⁄4" 60" 361⁄4" 28F6036CS 1361 1415 3⁄4" 72" 361⁄4" 28F7236CS 1637 1685
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Screen• Attachment hardware
How to Specify! Model@ Material: L = HPL both sides, vinyl edge
LD = HPL both sides, ply edgeLD2 = HPL both sides, plywoodedge
FL = Felt one side, HPL oneside, vinyl edge
FLD = Felt one side, HPL oneside, ply edge
FLD2 = Felt one side, HPL oneside, plywood edge
3 Felt color designator, if applicable
4 HPL finish designator (same bothsides)
5 Vinyl edge finish designator, if applicable
HPL
Fixed-Height Center ScreensStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.56
HPL/HPL Vinyl Ply Plywood Rim Rim EdgeD W H Model (L) (LD) (LD2)
HPL on Both Sides3⁄4" 60" 221⁄8" 28F6022CS $732 $790 $1445 3⁄4" 72" 221⁄8" 28F7222CS 766 827 18923⁄4" 60" 361⁄4" 28F6036CS 987 1066 2663 3⁄4" 72" 361⁄4" 28F7236CS 1054 1138 2851
Felt/HPL Vinyl Ply Plywood Rim Rim EdgeD W H Model (FL) (FLD) (FLD2)
Felt on One Side/HPL on One Side3⁄4" 60" 221⁄8" 28F6022CS $1404 $1461 $2116 3⁄4" 72" 221⁄8" 28F7222CS 1438 1499 25643⁄4" 60" 361⁄4" 28F6036CS 1659 1738 3335 3⁄4" 72" 361⁄4" 28F7236CS 1724 1809 3522
Screen width must be the same widthas the bench.
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Screen• Attachment hardware
How to Specify! Model@ Material: M = Writable laminate both
sides, vinyl edge MD = Writable laminate both
sides, ply edge MD2 = Writable laminate both
sides, plywood edge FM = Felt one side, writable lam-
inate one side, vinyl edge FMD = Felt one side, writable
laminate one side, ply edge FMD2 = Felt one side, writable
laminate one side, plywood edge ML = Writable laminate one side,
HPL one side, vinyl edge MLD = Writable laminate one
side, HPL one side, ply edge MLD2 = Writable laminate one
side, HPL one side, plywoodedge
3 Felt color designator, if applicable
4 Writable laminate designator5 Vinyl edge finish designator, if
applicable
Writable Laminate
Fixed-Height Center ScreensStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.57
Writable Laminate Vinyl Ply Plywood Rim Rim EdgeD W H Model (M) (MD) (MD2)
Writable Laminate on Both Sides3⁄4" 60" 221⁄8" 28F6022CS $768 $829 $15173⁄4" 72" 221⁄8" 28F7222CS 809 873 19873⁄4" 60" 361⁄4" 28F6036CS 1036 1117 27983⁄4" 72" 361⁄4" 28F7236CS 1106 1193 2993
Writable Laminate/Felt Vinyl Ply Plywood Rim Rim EdgeD W H Model (FM) (FMD) (FMD2)
Felt on One Side/Writable Laminate on One Side3⁄4" 60" 221⁄8" 28F6022CS $1439 $1501 $2188 3⁄4" 72" 221⁄8" 28F7222CS 1481 1544 2658 3⁄4" 60" 361⁄4" 28F6036CS 1708 1789 3468 3⁄4" 72" 361⁄4" 28F7236CS 1777 1865 3665
Writable Laminate/HPL Vinyl Ply Plywood Rim RIm EdgeD W H Model (ML) (MLD) (MLD2)
Writable Laminate on One Side, HPL on One Side3⁄4" 60" 221⁄8" 28F6022CS $738 $799 $1486 3⁄4" 72" 221⁄8" 28F7222CS 774 835 1948 3⁄4" 60" 361⁄4" 28F6036CS 1007 1089 2744 3⁄4" 72" 361⁄4" 28F7236CS 1064 1148 2936
Screen width must be the same widthas the bench.
Canopy Kimball Benching
Standard Includes
• Screen• Attachment hardware
How to Specify! Model@ Material: LD2 = HPL both sides FLD2 = Felt inside curve, HPL
outside FMD2 = Felt on inside curve,
writable laminate on outside MD2 = Writable laminate both
sides MLD2 = Writable laminate on
inside curve, HPL on outside3 Felt color designator, if
applicable4 HPL or writable laminate finish
designator
For Bench 1, 2, and 4
Fixed Canopy Screens CANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.58
PricingCANOPY®
Height Adjust
HPL/HPLD W H Model (LD2)
HPL on Inside CurveFor Use on Bench 1, 2, or 43⁄4" 60" 43" 28F6043CAS $53043⁄4" 72" 43" 28F7243CAS 5904
Felt/ Felt/ HPL WritableD W H Model (FLD2) (FMD2)
Felt on Inside Curve3⁄4" 60" 43" 28F6043CAS $6278 $65573⁄4" 72" 43" 28F7243CAS 7070 7346
Writable Writable Laminate Lam/ HPLD W H Model (MD2) (MLD2)
Writable Laminate on Inside Curve3⁄4" 60" 43" 28F6043CAS $5838 $55713⁄4" 72" 43" 28F7243CAS 6468 6181
Canopy width must be the samewidth as the bench.
Standard Includes
• Screen• Attachment hardware
How to Specify! Model@ Material: LD2 = HPL both sides FLD2 = Felt inside curve, HPL
outside FMD2 = Felt on inside curve,
writable laminate on outside MD2 = Writable laminate both
sides MLD2 = Writable laminate on
inside curve, HPL on outside3 Felt color designator, if
applicable4 HPL or writable laminate finish
designator
HPL/HPLD W H Model (LD2)
HPL on Inside Curve3⁄4" 591⁄4" 52" 28F6052CASE $5667
Felt/ Felt/ HPL WritableD W H Model (FLD2) (FMD2)
Felt on Inside Curve3⁄4" 591⁄4" 52" 28F6052CASE $6642 $6918
Writable Writable Laminate Lam/ HPLD W H Model (MD2) (MLD2)
Writable Laminate on Inside Curve3⁄4" 591⁄4" 52" 28F6052CASE $6229 $5942
Canopy Kimball Benching
Pricing
For End Media Wall with Height-Adjustable Worksurface
Fixed Canopy ScreensCANOPY®
Height Adjust
Page 2.59
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Standard Includes
• Screen• Attachment hardware
How to Specify! Model@ Material: LD2 = HPL both sides FLD2 = Felt inside curve, HPL
outside FMD2 = Felt on inside curve,
writable laminate on outside MD2 = Writable laminate both
sides MLD2 = Writable laminate on
inside curve, HPL on outside3 Felt color designator, if
applicable4 HPL or writable laminate finish
designator
HPL/HPLD W H Model (LD2)
HPL on Inside Curve3⁄4" 30" 43" 28F3043CAS $34213⁄4" 72" 43" 28F7243CAS 5904
Felt/ Felt/ HPL WritableD W H Model (FLD2) (FMD2)
Felt on Inside Curve3⁄4" 30" 43" 28F3043CAS $3955 $40633⁄4" 72" 43" 28F7243CAS 7070 7346
Writable Writable Laminate Lam/ HPLD W H Model (MD2) (MLD2)
Writable Laminate on Inside Curve3⁄4" 30" 43" 28F3043CAS $3648 $35303⁄4" 72" 43" 28F7243CAS 6468 6181
Canopy Kimball Benching
Pricing
For Meeting Booth
Fixed Canopy ScreensCANOPY®
Height Adjust
Page 2.60
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Canopy Kimball Benching
Standard Includes
• Screen• Attachment hardware
How to Specify! Model@ Material: LL = TFL both sides, vinyl edge LLD = TFL both sides, ply edge
FLL = Felt on user side, TFL onoutside, vinyl edge
FLLD = Felt on user side, TFL onoutside, ply edge
3 Felt color designator, if applicable
4 TFL finish designator5 Vinyl edge finish designator, if
applicable
TFL
Worksurface Privacy ScreensCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.61
PricingCANOPY®
Height Adjust
TFL/TFL Vinyl Ply Rim RimD W H Model (LL) (LLD)
TFL on Both Sides3⁄4" 591⁄4" 15" 28F5915PSWS $496 $5363⁄4" 60" 15" 28F6015PSWS 496 5363⁄4" 72" 15" 28F7215PSWS 530 572
Felt/TFL Vinyl Ply Rim RimD W H Model (FLL) (FLLD)
Felt on User Side/TFL on the Outside3⁄4" 591⁄4" 15" 28F5915PSWS $1167 $12063⁄4" 60" 15" 28F6015PSWS 1167 12063⁄4" 72" 15" 28F7215PSWS 1202 1243
IMPORTANT: 28F5915PSWS modelis for use on height-adjustable tableends with rectangular or half-round surface.➤See pages 2.41 and 2.42.
Canopy Kimball Benching
Standard Includes
• Screen• Attachment hardware
How to Specify! Model@ Material: L = HPL both sides, vinyl edge LD = HPL both sides, ply edge LD2 = HPL both sides, plywood
edge FL = Felt on user side, HPL on
outside, vinyl edge FLD = Felt on user side, HPL on
outside, ply edge FLD2 = Felt on user side, HPL
on outside, plywood edge3 Felt color designator, if applicable4 HPL finish designator5 Vinyl edge finish designator, if
applicable
HPL
Worksurface Privacy ScreensCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.62
PricingCANOPY®
Height Adjust
HPL/HPL Vinyl Ply Plywood Rim Rim EdgeD W H Model (L) (LD) (LD2)
HPL on Both Sides3⁄4" 591⁄4" 15" 28F5915PSWS $586 $631 $11553⁄4" 60" 15" 28F6015PSWS 586 631 11553⁄4" 72" 15" 28F7215PSWS 613 664 1355
Felt/HPL Vinyl Ply Plywood Rim Rim EdgeD W H Model (FL) (FLD) (FLD2)
Felt on User Side/HPL on Outside3⁄4" 591⁄4" 15" 28F5915PSWS $1256 $1303 $18273⁄4" 60" 15" 28F6015PSWS 1256 1303 18273⁄4" 72" 15" 28F7215PSWS 1284 1334 2027
IMPORTANT: 28F5915PSWS modelis for use on height-adjustable tableends with rectangular or half-round surface.➤See pages 2.41 and 2.42.
Canopy Kimball Benching
Standard Includes
• Screen• Attachment hardware
How to Specify! Model@ Material: M = Writable laminate both
sides, vinyl edge MD = Writable laminate both
sides, ply edge MD2 = Writable laminate both
sides, plywood edge ML = Writable laminate on user
side, HPL on outside, vinyl edge MLD = Writable laminate on user
side, HPL on outside, ply edge MLD2 = Writable laminate on
user side, HPL on outside, plywood edge
3 Felt color designator, if applicable
4 Writable laminate and/or HPL finish designator
5 Vinyl edge finish designator, if applicable
Writable Laminate
Worksurface Privacy ScreensCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.63
PricingCANOPY®
Height Adjust
Writable Laminate Vinyl Ply Plywood Rim Rim EdgeD W H Model (M) (MD) (MD2)
Writable Laminate on Both Sides3⁄4" 591⁄4" 15" 28F5915PSWS $614 $664 $12123⁄4" 60" 15" 28F6015PSWS 614 664 12123⁄4" 72" 15" 28F7215PSWS 644 695 1453
Writable Laminate/HPL Vinyl Ply Plywood Rim Rim EdgeD W H Model (ML) (MLD) (MLD2)
Writable Laminate on User Side/HPL on Outside3⁄4" 591⁄4" 15" 28F5915PSWS $606 $655 $12013⁄4" 60" 15" 28F6015PSWS 606 655 12013⁄4" 72" 15" 28F7215PSWS 635 688 1395
IMPORTANT: 28F5915PSWS modelis for use on height-adjustable tableends with rectangular or half-round surface.➤See pages 2.41 and 2.42.
Canopy Kimball Benching
PricingCANOPY®
Height Adjust
Standard Includes
• Screen• Accessory rail• Attachment hardware
How to Specify! Model@ Material: LL = TFL on both sides, vinyl
edge LLD = TFL on both sides, ply
edge L = HPL on both sides, vinyl
edge LD = HPL on both sides, ply
edge LD2 = HPL on both sides,
plywood M = Writable laminate on both
sides, vinyl edge MD = Writable laminate on both
sides, ply edge MD2 = Writable laminate on
both sides, plywood edge ML = Writable laminate user
side, HPL outside, vinyl edge MLD = Writable laminate user
side, HPL outside, ply edge MLD2 = Writable laminate user
side, HPL outside, plywood edge3 Felt color designator, if
applicable4 Writable laminate and/or HPL
finish designator5 Vinyl edge finish designator, if
applicable
Worksurface Privacy Screens with Accessory RailStatement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.64
TFL/TFL Vinyl Ply Rim Rim D W H Model (LL) (LLD)
TFL Screens on Both Sides3⁄4" 591⁄4" 15" 28F5915PSWSAR $571 $6163⁄4" 60" 15" 28F6015PSWSAR 571 6163⁄4" 72" 15" 28F7215PSWSAR 609 656
HPL/HPL Vinyl Ply Plywood Rim Rim EdgeD W H Model (L) (LD) (LD2)
HPL Screens on Both Sides3⁄4" 591⁄4" 15" 28F5915PSWSAR $644 $694 $12713⁄4" 60" 15" 28F6015PSWSAR 644 694 12713⁄4" 72" 15" 28F7215PSWSAR 674 729 1466
Writable Laminate Vinyl Ply Plywood Rim Rim EdgeD W H Model (M) (MD) (MD2)
Writable Laminate on Both Sides3⁄4" 591⁄4" 15" 28F5915PSWSAR $675 $729 $13333⁄4" 60" 15" 28F6015PSWSAR 675 729 13333⁄4" 72" 15" 28F7215PSWSAR 708 763 1496
Writable Laminate/HPL Vinyl Ply Plywood Rim Rim EdgeD W H Model (ML) (MLD) (MLD2)
Writable Laminate on User Side/HPL on Outside3⁄4" 591⁄4" 15" 28F5915PSWSAR $668 $707 $13213⁄4" 60" 15" 28F6015PSWSAR 668 707 13213⁄4" 72" 15" 28F7215PSWSAR 698 754 1436
IMPORTANT: 28F5915PSWSARmodel is for use on height-adjustabletable ends with rectangular or half-round surface.➤See pages 2.41 and 2.42.
Accessories➤See page 2.75.
Canopy Kimball Benching
Standard Includes
• Screen• Bungee cord• Attachment hardware
How to Specify! Model@ Material: LL = TFL, vinyl edge LLD = TFL, ply edge L = HPL, vinyl edge LD = HPL, ply edge LD2 = HPL, plywood edge3 TFL or HPL finish designator5 Vinyl edge finish designator, if
applicable
Worksurface Privacy Screen with Bungee CordsCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.65
PricingCANOPY®
Height Adjust
TFL/TFL Vinyl Ply Rim Rim D W H Model (LL) (LLD)
TFL on Both Sides3⁄4" 591⁄4" 15" 28F5915PSWSBC $991 $10713⁄4" 60" 15" 28F6015PSWSBC 991 10713⁄4" 72" 15" 28F7215PSWSBC 1061 1113
HPL/HPL Vinyl Ply Plywood Rim Rim EdgeD W H Model (L) (LD) (LD2)
HPL on Both Sides 3⁄4" 591⁄4" 15" 28F5915PSWSBC $1112 $1144 $18443⁄4" 60" 15" 28F6015PSWSBC 1112 1144 18443⁄4" 72" 15" 28F7215PSWSBC 1165 1200 2072
IMPORTANT: 28F5915PSWBCmodel is for use on height-adjustabletable ends with rectangular or half-round surface.➤See pages 2.41 and 2.42.
Canopy Kimball Benching
Standard Includes
Cable Carrier• Plastic: silver• Attachment hardware
Cable Basket• Metal: silver• Attachment hardware
End Media Wall Cable Manager• Satin anodized aluminum• Attachment hardware
Carousel Center Drawer• Plastic: silver• Rotates 360°• 81⁄4" front-to-back and 135⁄8" side-to-side clearance required
How to Specify
Plastic Cable Carrier, MetalCable Basket, End Media WallCable Manager, and CarouselCenter Drawer! Model
Undersurface Cable Tray! Model2 Paint designator
Cable Management and Organizational AccessoriesCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.66
PricingCANOPY®
Height Adjust
D W H Model Price
Plastic Cable Carrier 3⁄4" 21⁄4" 411⁄8" 45FCCS $224
Perforated Cable Tray for Use with G34 Worksurface Grommet33⁄4" 35" 65⁄8" 28A3506CTWP $437
Metal Cable Basket 4" 141⁄2" 31⁄4" back 45F14CBS $77 13⁄4" front
4" 311⁄8" 31⁄4" back 45F31CBS $99 13⁄4" front
End Media Wall Cable Manager 27⁄8" 26" 3⁄4" 28A0326CM $120
Carousel Center Drawer 81⁄4" 135⁄8" 13⁄8" 99K0817CDR $73
4"
13⁄4"31⁄4"
Canopy Kimball Benching
Standard Includes
• Housing: black anodized aluminumbody with painted steel faceplateand receptacles
• Six 15-amp waterproof receptacles
• 3-prong plug with circuit breaker2"D x 17⁄8"W x 11⁄2"H attached to6' cord
• Overload protection with reset but-ton
• Two data openings with voice/dataadapter kit
• Mounts in bench 2 power datatray opening from underside with 2screws provided
• Plugs directly into floor or wall outlet
• Cannot be used to link powertable to table
How to Specify! Model
For Use with Bench 2
Axil® Z Power/Data CenterCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.67
PricingCANOPY®
Height Adjust
D W H Model Price
Axil Z Power Center 21⁄4" 14" 21⁄2" 45F0214EAXZPDB $1168
U.L. listed. Any field modification ofthe electrical components voids theU.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under whichinstallation must be made.
Canopy Kimball Benching
Standard Includes
Power In-Feed• 10' black power cord with 15-amp3-prong plug
• Sensor box• Modular connector
Power Harness with Axil ZPower/Data Centers• One or two power/data centers.Each has the following:– Three 15-amp receptacles– One blank data portTotal of 6 receptacles and 2 blankdata per 2 person bench
• Housing: black anodized aluminumbody with painted steel faceplatesand receptacles
• Receptacles are waterproof in theevent of accidental spills
• Power centers connect to eachother and have attached a 60" har-ness to link to the next table.Additional jumpers are notrequired.
How to Specify! Model
For Use with Bench 4 or Media Wall
Interlink iQ Single-Circuit Power System ComponentsCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA SIN 711-1
† GSA SIN 711-18
U.L. listed. Any field modification ofthe electrical components voids theU.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under whichinstallation must be made.
Page 2.68
PricingCANOPY®
Height Adjust
D W H Model Price
Power In-Feed21⁄4"* 8" 21⁄2" 45FEI2IF2 $686
Power Harness with Two Axil Z Power/Data Centers for Bench 421⁄4" 8" 21⁄2" * 45FEIAXZPDB2 $1207
*Dimensions are for each power center.
Power Harness with One Axil Z Power Center for Fixed End Media Wall21⁄4" 8" 21⁄2" ** 28AIAXZPD1B2 † $633
**Dimensions are for power center.
Canopy Kimball Benching
Standard Includes
Ellora Power/Data Center withHinged Lid for G28 Grommet• Housing: silver or black powdercoat
• Hinged lid (allows technology toremain connected when lid isclosed while concealing the con-nection)
• Three 15-amp power receptacles• One USB• Two data openings• Data port adapter kit: black• 10' cord
Ellora Single-Circuit Power/DataCenter with Hinged Lid for G20Grommet• Housing: silver powdercoat• Hinged lid (allows technology toremain connected when lid isclosed while concealing the con-nection)
• Three 15-amp power receptacles• One data opening• Data port adapter kit: black• 10' cord
Node Power Center• 10' cord with three-prong plug• Two power receptacles• Metallic silver powdercoat finish• Fits C6 cut-out
Node Power/USB Center• 10' cord with three-prong plug• One power receptacle• One duplex USB• Metallic silver powdercoat finish
How to Specify! Model
D W H Model Fits Cut-Out Size Price
Xsede Ellora® Power/Data Center with Hinged LidSilver
51⁄4" 111⁄4" 31⁄2" 45APDCSAAPC † G28 $ 1158
Black
51⁄4" 111⁄4" 31⁄2" 45APDCSABPC † G28 $ 1274
Perks® Ellora® Power/Data Center 55⁄16" 85⁄16" 31⁄2" 99KPDCAMPC † G20 $ 521
Perks® Node® Power Center33⁄8" 31⁄4" KCEBN20PP C6 $205
Perks® Node® Power/USB Center33⁄8" 31⁄4" KCEBN11PU C6 $315
All electrical accessories are availablefor field installation only.
U.L. listed. Any field modification ofthe electrical components voids theU.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under whichinstallation must be made.
31⁄2"
Worksurface Cut-Out Mount
Power and Data ComponentsCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA SIN 711-8
† GSA Contract Pending
Page 2.69
PricingCANOPY®
Height Adjust
Canopy Kimball Benching
Standard Includes
Mho Power/Data Center• 10' cord with 15-amp straight,three-prong plug
• Two 15-amp receptacles• Two blank data ports that can accommodate one of eight provided adapter plates
• Silver powdercoat finish• Pop-up lid that sits flush with surface when closed
Mho Power/Data/USB Center• 10' cord with 15-amp straight,three-prong plug
• Two 15-amp receptacles• One blank data port that can accommodate one of eight provided adapter plates
• One port with two USB chargingoutlets
• Silver powdercoat finish• Pop-up lid that sits flush with surface when closed
Ashley Trio• Three receptacles• Two USB ports• One open port for HAIM, RJ45, orVEGA
• Data plate adapter kit• Housing: white• Bezel: white• 6'L white cord
How to Specify! Model
D W H Model Fits Cut-Out Size Price
Perks® Mho® Pop-Up Power/Data Center with Three-Prong Plug43⁄8" 83⁄8" 23⁄8" KCEB2PDPSPC † C4 $ 401
Perks® Mho® Pop-Up Power/Data/USB with Three-Prong Plug43⁄8" 83⁄8" 23⁄8" KCEB2PDUPSPC † C4 $ 519
Perks® Ashley Trio™ Power/Data/USB Center4" 9" 27⁄8" KCE0409ATSMWW C29 $371
Worksurface Cut-Out Mount, continued
Power and Data ComponentsCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA SIN 711-8
† GSA Contract Pending
All electrical accessories are availablefor field installation only.
U.L. listed. Any field modification ofthe electrical components voids theU.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under whichinstallation must be made.
Page 2.70
PricingCANOPY®
Height Adjust
Canopy Kimball Benching
Standard Includes
Pull-Up Power/USB Grommet• Four receptacles• Two USB ports• Overcurrent and voltage protection
• 10’ black cord• Finger-pull access• Black housing
How to Specify! Model
D W H Model Fits Cut-Out Size Price
Perks® Pull-Up Power/USB Grommet23⁄8" 111⁄4" 115⁄8"* KCE0211PUPUGMB 23⁄8"-diameter round cut-out. $272 Specify a G19 grommet and replace the plastic grommet with this model or field scribe. *When in stored position, unit extends 115⁄8" below the surface. Unit sits flush on surface when in use.
Worksurface Cut-Out Mount, continued
Power and Data ComponentsCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Non-Contract
All electrical accessories are availablefor field installation only.
U.L. listed. Any field modification ofthe electrical components voids theU.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under whichinstallation must be made.
Page 2.71
PricingCANOPY®
Height Adjust
Canopy Kimball Benching
Standard Includes
Mini-Tap Power Unit• Two receptacles• Mounting hardware• 6' black cord
Mini-Tap Power/USB Unit• One receptacle• Two USB ports• Mounting hardware• 6' black cord
Power Outlet Strip• Six outlets• 10' power cord
Power Strip with Spiral Cord• Housing: black plastic• Six 15-amp (TR) tamper resistantpower receptacles
• Overload protection with reset button
• Spiral cord: 5' minimum stretchesto 9' maximum with right hand 3-prong plug
• Two mounting screws provided tomount under worksurface
How to Specify! Model
Undersurface Mount
Power and Data ComponentsCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Non-Contract
All electrical accessories are availablefor field installation only.
U.L. listed. Any field modification ofthe electrical components voids theU.L. listing. The customer is responsi-ble for the proper application of prod-ucts to the local codes under whichinstallation must be made.
Page 2.72
PricingCANOPY®
Height Adjust
D W H Model Planning Factors Price
Perks® Mini-Tap® Power Unit 33⁄8" 3" 13⁄8" KCE0303MTPPUSMB Mount unit near the worksurface edge for easy access. $114
Perks® Mini-Tap® Power/USB Unit 33⁄8" 3" 13⁄8" KCE0303MTPUUSMB Mount unit near the worksurface edge for easy access. $246
Perks® Power Outlet Strip13⁄4" 101⁄2" 11⁄2" 99KELPS † $83
Xsede® Power Strip with Spiral Cord for Use with Freestanding Worksurfaces and All Benches13⁄4" 91⁄2" 13⁄4" 45APSSC † $241
Canopy Kimball Benching
How to Specify! Model2 Paint designator
Accessories for Worksurface G34 Accessory FrameCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.73
PricingCANOPY®
Height Adjust
D W H Model Description Price
Mounting Plate for Salt or Pepper Power Center23⁄8" 5" 3⁄4" 28A0205MPSPWP Painted; power centers sold separately $274
Task Light113⁄8" 5" 19" 28A22TLWP Column is silver; light dome is white and silver. $667 Paint selection is for mounting plate only.
Single Monitor Arm 5" 12" 28AMASWP Adjustable arm is silver. $840 Paint selection is for mounting plate only.
Dual Monitor Arm 5" 12" 28AMADWP Adjustable arm is silver. $1253 Paint selection is for mounting plate only.
Canopy Kimball Benching
How to Specify
Writable Marker Holder! Model2 Writable paint designator: 405M = Designer White
All others! Model2 Paint designator
continued
Accessories for Worksurface G34 Accessory FrameCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA SIN 711-2
Page 2.74
PricingCANOPY®
Height Adjust
D W H Model Description Price
Utility Cup 5" 5" 61⁄4" 28A0506CHWP Stainless steel utility cup $281
Clock23⁄8" 5" 61⁄4" 28A0506CLWP Black hands; number locations are open holes $318
Picture Frame23⁄8" 5" 61⁄4" 28A0506PFWP Picture location is open; no covering $258
Wavy Shelf35⁄8" 10" 61⁄4" 28A1006WSWP Painted $301
Small Writable Marker Holder23⁄8" 10" 61⁄4" 28A1006DMHW Writable paint $291
Large Writable Marker Holder23⁄8" 15" 61⁄4" 28A1506DMHW Writable paint $330
Canopy Kimball Benching
How to Specify! Model2 Paint designator
Accessories for Screen Accessory RailCANOPYHeight Adjust
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76GSA Contract Pending
Page 2.75
PricingCANOPY®
Height Adjust
D W H Model Description Price
Utility Cup 33⁄4" 31⁄2" 31⁄4" 28A0402CHPSP Stainless steel utility cup $263
Clock1⁄4" 5" 5" 28A0505CLPSP Black hands; number locations are open holes $281
Picture Frame1⁄4" 5" 5" 28A0505PFPSP Picture location is open; no covering $256
Name Plate1⁄4" 85⁄8" 13⁄8" 28A0901NPPSP Name location is open; no covering $268
Wavy Shelf21⁄2" 81⁄2" 3⁄8" 28A1006WSPSP $263
File Organizer1" 13" 83⁄4" 28A1309FOPSP $281
Canopy Kimball Benching
Surface MaterialsWood CANOPY®
Height Adjust
Page 2.76
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Wood Price Group 1
MC Amber CherryCC Cordoba CherryMH Mocha CherrySC Sedona Cherry
IM Brighton MapleTM Huntington Maple
ES Espresso WalnutMW Midtown WalnutTW Tribeca WalnutUW Urban Walnut
CX Coco2
SX Sienna2
CO Canyon Straight Grain1
DF Driftwood Straight Grain1
YO Monterey Straight Grain1
NW Tuscan Straight Grain1
Price Group 23
CS Coco SapeleSS Sienna Sapele
CZ Clear Zebrawood
1 Wood truss is constructed of beechwood. Canyon, Driftwood, Monterey,and Tuscan straight grain finishes onwood truss will be a complementarycolor match without the grain pattern.
2 Available on wood truss only. These fin-ishes will coordinate with finishes of thesame name on price group 2 sapele.
3 Available on Canopy worksurfaces only;upcharge applies.
Applies to:• Worksurfaces• Wood truss
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of the Kimballmaterials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)overview
• Alliance program • TB133 process
MPORTANT: Wood finishes applied tosolid hardwood are complementary tothe same wood finish applied to woodveneer, but not an exact match.➤Contact Customer Service for moreinformation.
IMPORTANT: Woodgrain laminate is acommercially compatible match to thewood finish of the same name anddesignator with consideration for themost common application—laminatesurfaces on a wood chassis. Whenlaminate and wood are mixed in otherapplications, the flip that occurs naturally in veneer may influence theoverall match from piece to piece.
Canopy Kimball Benching
Surface MaterialsLaminateCANOPY®
Height Adjust
Page 2.77
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
HPL
Applies to:
• Worksurfaces• Privacy and center screens• Canopy screens• Equipment shelf
TFL
Applies to:
• Worksurfaces• Privacy and center screens• Canopy screens
WoodgrainMC Amber CherryCC Cordoba CherryMH Mocha CherrySC Sedona Cherry
IM Brighton MapleTM Huntington Maple
MW Midtown WalnutTW Tribeca WalnutUW Urban Walnut
CO Canyon Straight GrainDF Driftwood Straight GrainYO Monterey Straight GrainNW Tuscan Straight Grain
CZ Clear Zebrawood
Solid480 Antique White403 Chamois462 Cinder440 Cloud405 Designer White450 Fog488 Frosty White461 Graphite420 Sandstone425 Shadow460 Storm419 Wallaby
WoodgrainMC Amber CherryCC Cordoba CherryMH Mocha CherrySC Sedona Cherry
IM Brighton MapleTM Huntington Maple
MW Midtown WalnutTW Tribeca WalnutUW Urban Walnut
CO Canyon Straight GrainDF Driftwood Straight GrainYO Monterey Straight GrainNW Tuscan Straight Grain
CZ Clear Zebrawood
Solid480 Antique White403 Chamois462 Cinder440 Cloud405 Designer White450 Fog488 Frosty White461 Graphite416 Putty420 Sandstone425 Shadow460 Storm419 Wallaby
Pattern874 Bronze Legacy842 Canyon Zephyr823 Carbon Evolv841 Desert Zephyr862 Grey Glace844 Loden Zephyr843 Misted Zephyr846 Morro Zephyr812 Mushroom Tigris808 Nickel Evolv807 Silcon Evolv873 Tawny Legacy805 Titanium Evolv809 Tungsten Evolv802 White Nebula814 White Tigris
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of the Kimballmaterials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)overview
• Alliance program • TB133 process
IMPORTANT: Woodgrain laminate is acommercially compatible match to thewood finish of the same name anddesignator with consideration for themost common application—laminatesurfaces on a wood chassis. Whenlaminate and wood are mixed in otherapplications, the flip that occurs natu-rally in veneer may influence the overall match from piece to piece.
Customer-specified laminate is available on:• HPL worksurfaces• HPL privacy screens• HPL center screens➤See the Surface Materials Reference Guide.
Canopy Kimball Benching
continued
LaminateCANOPY®
Height Adjust
Page 2.78
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Writable Laminate
Applies to:
• Worksurfaces• Privacy and center screens• Canopy screens
Solid405M Designer White
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of the Kimballmaterials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)overview
• Alliance program • TB133 process
Canopy Kimball Benching
Surface MaterialsPaint and VinylCANOPY®
Height Adjust
Page 2.79
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Paint
Vinyl
Price Group 1480 Antique White427 Barley437 Cement403 Chamois462 Cinder440 Cloud485 Dark Chocolate405 Designer White453 Environmental Grey459 Featherstone450 Fog488 Frosty White461 Graphite445 Moon Beam416 Putty420 Sandstone425 Shadow465 Smoke460 Storm429 Tantalum419 Wallaby
Price Group 21111 Apricot Orange103 Chive106 Cloud Blue107 Dark Blue102 Drizzle109 Fossil113 Golden Rod456 Granite110 Silver Mink105 Spinach Green112 Tango Red
Price Group M514 Carbon Metallic507 Patina Metallic501 Platinum Metallic1
505 Satin Bronze Metallic544 Silver Pearl504 Taupe Metallic
1 No upcharge for 501 Platinum Metallicon Canopy product line
WoodgrainMC Amber CherryIM Brighton MapleCO Canyon Straight GrainCZ Clear ZebrawoodCC Cordoba CherryDF Driftwood Straight GrainTM Huntington MapleMW Midtown WalnutMH Mocha CherryYO Monterey Straight GrainSC Sedona CherryTW Tribeca WalnutNW Tuscan Straight GrainUW Urban Walnut
Solid480 Antique White403 Chamois462 Cinder440 Cloud485 Dark Chocolate405 Designer White450 Fog488 Frosty White461 Graphite420 Sandstone425 Shadow460 Storm419 Wallaby
Applies to:• Wood truss• Accessories
Applies to:• Softened rim (P) on worksurfaces• Privacy screen edges• Center screen edges
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of the Kimballmaterials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)overview
• Alliance program • TB133 process
Customer-specified paint (CSP) is notavailable on Canopy.
IMPORTANT: Due to the reflectivequalities of metallic paint, variations incolor may occur.
Canopy Kimball Benching
Surface MaterialsFabric and FeltCANOPY®
Height Adjust
Page 2.80
Statement of Line ➤See page 2.3
Planning page 2.8
Pricing page 2.37
Surface Materials page 2.76
Fabric
Wool Felt
Applies to:• Fixed end seats• Meeting booth seat cushions
Applies to:• Screens• Canopies
19111 Apricot Orange19103 Chive19106 Cloud Blue19107 Dark Blue19113 Golden Rod19117 Heathered Oatmeal19119 Heathered Slate19118 Heathered Stone19105 Spinach Green19112 Tango Red
Kimball Seating Fabric (Upholstery)Price Grades 1–7
➤See the Surface Materials Reference Guide atwww.kimball.com for the most up-to-date list of available seatingfabric patterns.
➤See the Kimball Surface Materials Reference Guide at www.kimball.comfor a complete overview of the Kimballmaterials program, including:• Characteristics of wood• Special wood finishes• Customer-specified laminate (CSL)• Customer-specified paint (CSP)• Fabric application and colorways• Customer’s own material (COM)overview
• Alliance program • TB133 process