Post on 28-Aug-2018
CONSTRUCTION ACCESSORIES
PRODUCTCATALOGUE
Construction Accessories Technology
& InnovationPrecast Accessories
Liquid Waterproofing
Acoustic & Vibration Control
Trusted Experts across the construction industry for Acoustics, Precast, Construction Accessories, Innovation & Waterproofing
All details are correct at the time of going to print.
CONSTRUCTIONACCESSORIES
Index
Section 1
RECOSTAL® STARTER
PACKS .............................05
Section 2
CONSTRUCTION GROUTS,
MORTARS AND OILS .....15
Section 3
SPACERS ........................25
Section 4
FORMWORK
ACCESSORIES ..............37
Section 5
WATERPROOFING .........55
Section 6
ACOUSTICS ....................67
Section 7
MISCELLANEOUS ..........73
RECOSTAL®
STARTER PACKS
05CONSTRUCTIONACCESSORIES
SECTION 1
Section Index
Standard Type RSH ........06
Recostal ..........................08
Couplers ..........................10
Product:
STANDARD TYPE RSHRECOSTAL® STARTER PACKS TYPE RSH WITH TRAPEZOIDAL PROFILEFOR TRANSVERSE STRESSES.
Technical data – RSH Starter Packs• Trapezoidally profiled starter packs, joint category “key profiled“ according to DIN EN 1992-1-1, highest shear force bearing capacity • Concrete reinforcement steel BSt 500 S or BSt 500 WR according to DIN 488, Ø = 12 mm – 16 mm• Diameter of bending rolls dbr ≥ 6 Ds in the section of rebending • 6 standard profiles, bar widths 12 cm – 22 cm, smaller or larger bar widths on request• Standard unit length L= 1.25 m, fixed lengths up to 2.50 m on request
ApplicationRecostal® Starter Packs ensure time-saving installation of secure connections between steel reinforced concrete construction parts that are created with different pour sequences. Therefore, floor slabs, walls or staircases can be installed subsequently with rigid connections corresponding to the highest joint category “key profiled“.The large variety of shapes offers the perfect connection for many different design situations; special types for specific solutions are also available. The standard range includes starter packs with 12mm and 16mm diameter and L=1.25m unit lengths. Unit lengths exceeding 1.25m, the production of special types and the combination with waterproofing systems as well as solutions for entire projects are possible on request.
Increased corrosion protection
Type RSH is installed with a planned 25 mm recess
RSH active - Starter Packwith active waterproofingRSH Starter Packs can be manufactured with an active bentonite coating on both sides for the application in construction joints exposed to water.
06CONSTRUCTION
ACCESSORIES
RSH Starter Packs
Recostal® Starter Packs type RSH meet the requirements of DIN EN 1992-1-1 for the highest surface category “key profiled“ in the case of transverse loads.
Advantages• Strong, robust galvanised sheet metal starter packs, dimensionally stable• Cost and time effective installation, starter packs are simply nailed to the formwork • Easy removal of the sheet metal covers due to their special design• Trapezoidally profiled box for excellent bond• Various possible combinations provide a solution for all common installation details
The deciding factor for the designerRecostal® Starter Packs type RSH meet the requirements of the DBV Bulletin “Rückbiegen von Betonstahl und Anforderungen an Verwahrkästen nach Eurocode 2” [“Rebending of reinforcement steel and requirements for continuity strips according to Eurocode 2”] (issue January 2011) for the highest joint category “key profiled” in the case of transverse stresses. No national approval required!
Key Profile
07CONSTRUCTIONACCESSORIES
Other shapes on request
T12 T16 Type Bar Ø (mm) Centres Lap Length (mm) LA
Width of Stirrup (mm) B
Width of Casing (mm) D
RSH 100 12 150 500 100 120
RSH 120
12 150 500 120 140
12 200 500 120 140
RSH 140
12 150 500 140 170
12 200 500 140 170
RSH 160
12 150 500 160 190
12 200 500 160 190
16 150 650 160 190
16 200 650 160 190
RSH 180
12 150 500 180 210
12 200 500 180 210
16 150 650 180 210
16 200 650 180 210
RSH 200
12 150 500 200 230
12 200 500 200 230
16 150 650 200 230
16 200 650 200 230
RSH 220
12 150 500 220 250
12 200 500 220 250
16 150 650 220 250
16 200 650 220 250
Reinforcement steel: Cares Approved
L–1250mm
08CONSTRUCTION
ACCESSORIES
Product:
RECOSTAL® SINGLE BAR STARTER PACKS TYPE VHQ
Standard Type Ø (mm)/ Lap length Centres s s (cm) l0 (cm) (cm)
- 12/15 50 15
- 12/20 50 20
- 16/15 65 15
- 16/20 65 20
Graph for the determination of the production-related required box widths and max. producible l0-lengths
VHQ12 VHQ16
L–1250mm
09CONSTRUCTIONACCESSORIES
SHQ
SWQ
SG
SR
SB
2SH
SRG
SKB
SKG
SKR
Solutions for special projects on request
Product:
FEMALE COUPLERS
10CONSTRUCTION
ACCESSORIES
This is the cast in part of the system, it comprises a socket swaged onto a high yield reinforcement bar. The socket area is larger than the bar ensuring that the bar itself is the weakest part of the coupler. Also available in Stainless Steel.
Product Length Thread Coupler Reinforcement Steel Code (mm) Dimensions Dimensions
Metric Length Width Length Bar Dia. Tensile Force Rated Section (M) (mm) (mm) (mm) (mm) (kN) (mm2)
PSG120400 400 16 25 22 62 12 56.5 113.0PSG120600 600 16 25 22 62 12 56.5 113.0PSG120800 800 16 25 22 62 12 56.5 113.0PSG121500 1500 16 25 22 62 12 56.5 113.0PSG160400 400 20 38 27 86 16 100.5 201.0PSG160550 550 20 38 27 86 16 100.5 201.0PSG160800 800 20 38 27 86 16 100.5 201.0PSG161020 1020 20 38 27 86 16 100.5 201.0PSG161440 1440 20 38 27 86 16 100.5 201.0PSG200700 700 24 42 34 99 20 157.0 314.0PSG201000 1000 24 42 34 99 20 157.0 314.0PSG201280 1280 24 42 34 99 20 157.0 314.0PSG201800 1800 24 42 34 99 20 157.0 314.0PSG202000 2000 24 42 34 99 20 157.0 314.0PSG202200 2200 24 42 34 99 20 157.0 314.0PSG250700 700 30 52 41 117 25 245.5 491.0PSG251000 1000 30 52 41 117 25 245.5 491.0PSG251500 1500 30 52 41 117 25 245.5 491.0PSG252260 2260 30 52 41 117 25 245.5 491.0PSG321400 1400 42 65 54 153 32 401.9 803.8PSG322300 2300 42 65 54 153 32 401.9 803.8PSG401000 1000 48 72 64 188 40 625.0 1250.0PSG401500 1500 48 72 64 188 40 625.0 1250.0PSG402000 2000 48 72 64 188 40 625.0 1250.0
Product:
MALE COUPLERS
11CONSTRUCTIONACCESSORIES
This is the screw in coupler. It has an enlarged threaded end to maximize the bar strength.
Product Length Thread Reinforcement Steel Code (mm) Dimensions
Metric Length Bar Dia. Tensile Force Rated Section (M) (mm) (mm) (kN) (mm2)
TSE120200 200 16 22 12 56.5 113.0TSE120375 375 16 22 12 56.5 113.0TSE120575 575 16 22 12 56.5 113.0TSE120800 800 16 22 12 56.5 113.0TSE121000 1000 16 22 12 56.5 113.0TSE121500 1500 16 22 12 56.5 113.0TSE122000 2000 16 22 12 56.5 113.0TSE160520 520 20 28 16 100.5 201.0TSE160770 770 20 28 16 100.5 201.0TSE161020 1020 20 28 16 100.5 201.0TSE161250 1250 20 28 16 100.5 201.0TSE161440 1440 20 28 16 100.5 201.0TSE162200 2200 20 28 16 100.5 201.0TSE161250 1250 20 28 16 100.5 201.0TSE200665 665 24 35 20 157.0 314.0TSE200965 965 24 35 20 157.0 314.0TSE201280 1280 24 35 20 157.0 314.0TSE201800 1800 24 35 20 157.0 314.0TSE202200 2200 24 35 20 157.0 314.0TSE251000 1000 30 43 25 245.5 491.0TSE251500 1500 30 43 25 245.5 491.0TSE252260 2260 30 43 25 245.5 491.0TSE321000 1000 42 45 32 401.9 803.9TSE321400 1400 42 45 32 401.9 803.9TSE322300 2300 42 45 32 401.9 803.9
FEMALE BENT
MALE BENT
FEMALE DOUBLE ENDED
MALE DOUBLE ENDED
Product:
BESPOKE COUPLERS AVAILABLE
Product:
ALLIGATOR COUPLERS WITH PLATE
The plate is designed to ensure dead end SW embedment for reinforcement steel bars in concrete. This helps to reduce the congestion and simplify the placement of reinforcement bars by removing the need for hooked ends.
BCSOP10 10 3 90 - 99 13 88 BCSOP12 12 3 90 - 99 13 98 BCSOP14 14 4 90 - 99 13 123 BCSOP16 16 4 90 - 99 13 123 BCSOP20 20 5 90 - 99 13 150 BCSOP22 22 5 175 - 192 17 175 BCSOP25 25 6 175 - 192 17 205 BCSOP32 32 7 355 - 405 22 255 BCSOP36 36 8 355 - 405 22 285 BCSOP40 40 9 355 - 405 22 305
Product Bar Dia. No. of Torque Bolts SW L Code (mm) Bolts (Nm) (mm) (mm)
12CONSTRUCTION
ACCESSORIES
L1
SW
The Alligator Couplers are used for splicing any grade or profile of reinforcing bar. These couplers are made for reinforcement steel with diameters in the range of 10mm to 40mm. Connection is made by inserting bars into both ends of the coupler. The breaking bolts are then screwed by hand and tightened by ratchet wrench until bolts shear off. These couplers can be used in particular cases to replace the damaged reinforcements with new ones and to connect to the old structure.
Advantages • No need for threading or any other bar preparation. • These are fast (simple) easy to use. • No special skilled labor required. • No welded components. • Performs as a continuous piece of rebar. • Allows for easy visually inspection.
Product:
ALLIGATOR SPLICE OFF COUPLERS
13CONSTRUCTIONACCESSORIES
Product Bar Dia. No. of Bolt L d d1 H H1 H2 h h1 h2 SW Torque Bolts Code (mm) Bolts Thread (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (Nm)
ALC10 10 6 M12 160 35 33 48 35 13 36 23 13 13 90 - 99 ALC12 12 6 M12 180 35 33 51 35 16 40 24 16 13 90 - 99 ALC14 14 8 M12 230 40 36 57 39 18 45 27 18 13 90 - 99 ALC16 16 8 M12 230 40 36 57 39 18 45 27 18 13 90 - 99 ALC18 18 10 M12 260 44 42 60 40 20 49 29 20 13 90 - 99 ALC20 20 10 M16 260 47 44 65 44 21 54 33 21 17 90 - 99 ALC22 22 10 M16 330 53 50 68 42 26 58 32 26 17 175 - 192 ALC25 25 12 M16 390 56 52 75 45 30 63 33 30 17 175 - 192 ALC28 28 12 M20 420 66 62 90 60 30 75 45 30 22 355 - 405 ALC32 32 14 M20 480 73 68 91 60 31 77 46 31 22 355 - 405 ALC36 36 16 M20 540 79 73 99 64 35 85 50 35 22 355 - 405 ALC40 40 18 M20 580 79 73 103 67 36 85 49 36 22 355 - 405
CONSTRUCTION GROUTS, MORTARS
AND OILS
15CONSTRUCTIONACCESSORIES
SECTION 2
Section Index
Formwork Treatment ......16
Concreting Products ......17
Resin, Mortars & Accessories .................18
Cementitious Repairs & Paving ..........................19
Cementitious & Resin .....20
Protective Coating ..........21
Sealants ...........................22
Accessories.....................22
Estimating Guide ............23
16CONSTRUCTION
ACCESSORIES
Product:
FORMWORK PRODUCTS
Product Description Pack Size Coverage Yield
Nulease Varnish Standard
FORMWORK VARNISH for sealing and protecting general formwork where the criterion is for multiple use.
5 L 20 L
7-9m2 per litre
Nulease W.B.
WATER BASED acrylic SEALER designed for applications onto wood and concrete formwork. This environmentally friendly product is characterised by its rapid drying, hard wearing, non-yellowing properties which gives maximum protection to timber formwork and moulds which ensures production of high quality concrete finishes.
5 L 25 L
7-9m2 per litre
Formfil FORMWORK REPAIR PASTE designed to produce a fast setting compound which is resistant to impact, abrasion, 7 kg 3.92 L oil, water and concrete alkalis.
1.5KG 7KG
0.84L 3.92L
Omnilease Bio Vegetable oil based release agent which forms a thin, colourless film on the surface of formwork. It facilitates the even dispersion of the concrete and assists bubble resorption during vibration. It is non-toxic, environmentally/user friendly and produces quality pre-cast finishes.
25 L 210 L 1000 L
25-60m2 per litre
Logco-lease Versatile high specification chemical release agent blended with highly active surfactants ensures that optimum release is attained hence achieving a high quality concrete surface finish. Produces uniform, stain-free concrete —can be used on timber, plywood, metal and plastic formwork.
20 L 205 L
18-30m2 per litre
17CONSTRUCTIONACCESSORIES
Product:
CONCRETING PRODUCTS
Product Description Pack Size Coverage Yield
Chemcure S CONCRETE CURING LIQUID. Aqueous solution of metallic silicates which when applied to fresh concrete forms a e micro crystaline seal in the pores reducng evaporation. Compatible with Silane. Also available with fugitive dye. WRAS approved product.
25 L 210 L
5.5 – 6m2 per litre
Chemcure R90 CONCRETE CURING MEMBRANE with a water retention efficiency in excess of 90%. Meets ASTM C309.66 and HA Specification.
20 L 210L
5.5 – 6m2 per litre
Chemcure R90 Alum
ALUMINISED CURING MEMBRANE produced by the addition of aluminium flake where the requirement for a light reflective system reduces concrete temperature to a minimum. Meets ASTM C309.66 and HA specification.
20 L 210L
5.5 – 6m2 per litre
Curecote Super Highly efficent non degradable solvent based acrylic SEALER AND CURING MEMBRANE which may overcoated at a later stage without removal.
20 L 210 L
5 – 6 m2 per litre
Nuwash SOLVENT BASED CLEANER for equipment which has been in contact with Curecote Super, R90 and R90 Alum.
5 L 20 L
N/A
D-Bar DEBONDING COMPOUND one part bitumen based 1coating designed to coat dowel bars in expansion joints where movement is required. Applied by brush or dipping.
5 L 25 L
1.8 – 3.6m2 per litre
Aquatard FWR FORMWORK RETARDING GEL, a non-flammable system designed to produce an exposed aggregate finish to provide an excellent key for subsequent concrete or surface treatments. Biodegradable / environmentally friendly.
5 L 25 L
6 -10m2 per litre
Aquatard TF TOPFACE RETARDER, water based spray-applied retarder designed to expose aggregate on horizontal surfaces, biodegradable/environmentally friendly.
25 L 210 L
3M2 PER LITRE
Nuproof ALKALI RESISTANT RUBBERISED BITUMINOUS COATING, with excellent adhesion to sound building materials including asphalt surfaces. Flexible at low temperatures and resists softening. Ideal as a flexible waterproof membrane on bridge abutments and external walls prior to backfilling.
25 L 200 L
2M2 PER LITRE
Chemclean ACID CLEANER, ideal for the removal of all cement based contamination and rust from a wide range of surfaces.
20 L 200 L
N/A
Nufoam 12mm x 6mm 25mm x 12mm
GROUT CHECK TAPE, adhesive foam strip designed inaccessible joints to prevent grout loss.
40 ROLLS 12m
18CONSTRUCTION
ACCESSORIES
Product:
RESIN MORTARS & ADHESIVES
Product Description Pack Size Coverage Yield
Epicon Mortar A versatile three component EPOXY MORTAR system for general repairs to spalled or damaged concrete 25 Kg 12.87 L surfaces.
25kg 12.87 L
Epicon F.S. Mortar A RAPID CURING EPOXY MORTAR. Allows concrete 5 Kg 2.56 L repairs to be caried out with the minimum of disruption. 25 Kg 12.5 L A primer is not required and the mortar will tolerate being applied to a damp substrate.
5kg 25kg
2.56 L 12.5 L
Epibear EPOXY BRIDGE BEARING MORTAR. Designed 18 Kg 8.35 L specifically for bridge bearing pad levelling plinths and other load bearing applications. Develops high strengths quickly even at low temperatures. Used in conjunction with Epicon Primer/Tack Coat ‘H’.
18kg 8.35L
Epikerb EPOXY BEDDING MORTAR. Enables the fixing of kerbs 20 Kg 9.70 L directly onto concrete or asphalt eliminating the need of a bedding channel or haunching.
20kg 9.70 L
Epicon Tack Coat V and H
EPOXY PRIMER / TACKCOAT. A solvent free system used on vertical and horizontal surfaces. Can be applied to damp surfaces. Use with Resiset, Epicon and Epibear mortar systems.
0.25kg 0.5kg 1kg
4 – 6M2 PER KILO
Nuwash a powerful SOLVENT CLEANER used to clean all tools 5 L N/a and equipment which have been in contact with resin 20 L based materials.
5 L 20 L
N/a
19CONSTRUCTIONACCESSORIES
Product:
CEMENTITIOUS REPAIR & PAVING PRODUCTS
Product Description Pack Size Coverage Yield
Deck Repair Rapid POLYMER MODIFIED CEMENTITIOUS REPAIR MORTAR characterised by its high early strength development and rapid moisture loss. the material has been designed to comply with the requirements of the Ha standard BD27/86 clause 6 and is an ideal material for the repair of bridge decks prior to waterpoofing.
25kg 12.5 L
Nucem HB Mortar HIGH BUILD LIGHTWEIGHT FIBRE REINFORCED MORTAR designed for the repair and restoration of spalled or damaged concrete in the inverted and vertical plane. a prepacked material containing an SBR or acrylic gauging liquid to improve bonding and waterproofing properties of the mortar. complies with the requirement of Ha 27.5kgstandard BD 27 / 86 cla0.5kguse 6. Tested by T1kgaywood.
20kg 13 L
Nucem Mortar PREPACKED CEMENTITIOUS MORTAR for the repair of sections between 10mm - 30mm mainly in the horizontal plane. available with either an SBR or acrylic gauging liquid as required. guaranteed low W/c ratio. complies with the requirements of Ha specification BD27/86 clause 6.
27.5kg 13 L
Nucem Concrete Similar to Nucem Mortar but containing a large granotype 27.5 kg 12 L aggregate FOR SECTIONS GREATER THAN 25mm. Available with either an SBR or acrylic gauging liquid as required. complies with the requirements of Ha standard BD27/86 clause 6.
27.5kg 12 L
Nucem Primer Water dispersed CEMENTITIOUS/EPOXY PRIMER TACK COAT for use with acropak HB40 Mortar, Nucem HB Mortar, Nucem Mortar and Nucem concrete. also recommended for use when bonding fresh concrete to existing concrete.
0.5kg 1kg 5kg
3 -5m2 per kg
Nucem emulsion Primer
Single Pack ACRYLIC, READY-TO-USE PRIMER, 5 l 5 - 8 m2 for application with Nucem or acropak products 25 l per litre or as a general bonding primer.
5 L 25 L
5- 8 m2 per litre
Nucem Skimcoat POLYMER MODIFIED CEMENTITIOUS LEVELLING 12.5 kg 6.24 l coat with built-in flexibility and waterproofing properties. @ 1 mm Ideal for the treatment of repaired concrete and the surrounding areas to give an overall uniform appearance. Tested by Taywood.
12.5kg 6.24 l @ 1MM
Nupatch cosmetic (white/grey/
Special)
An easy to use CEMENTITIOUS COMPOUND which 7.5 7.5kgkg 3.75 l develops a high strength at an early age for 25 kg 12.5 l small cosmetic repairs of both insitu and pre cast concrete. can be colour-blended on site to match substrate.
7.5kg 25kg
3.75 L 12.5 L
Nupatch Bedding
Mortar HA104
RAPID SETTING BEDDING MORTAR characterised by its rapid strength development. Complies with HA 104/09 6.1 for Bedding of Chamber and Gully Tops.
25 kg 12 L
Nupatch Bedding Mortar
RAPID SETTING BEDDING MORTAR characterised by its rapid strength development which enables work to be carried out with the minimum of disruption. Ideal for the bedding and raising of manhole frames, fixing of street furniture and as a rapid setting repair mortar. Complies with HD 27/04 3.11N/mm2 @ 2 hours.
25 kg 12.5 L
20CONSTRUCTION
ACCESSORIES
Product:
CEMENTITIOUS & RESIN STRUCTURAL GROUTS
Product Description Pack Size Coverage Yield
Nugrout Hi-Spec
A high strength, non shrink, free flowing, CEMENTITIOUS GROUT based on low alkaline portland cement and non reactive aggregates. Meets the requirements of HA Specification Clause 2601.4. Tested by Aston Material Services.
25 kg 13 L
Nugrout Flowable Concrete
FLOWABLE, SELF-COMPACTING MICRO CONCRETE containing non reactive aggregates and which has a low Na2O content. Suitable for use where cathodic protection is in operation. Complies with the requirements of HA Specification BD27/86 Clause 4. Tested by Scientifics Group.
25 kg 12.7 L
Epicon Grout L EPOXY GROUT. A three component pourable free flowing high strength grout for gaps over 20mm.
20 kg 10.1 L
Epicon Grout M EPOXY GROUT. A lightly filled pourable grout for free flow gap grouting, recommended for gaps between 5mm - 30mm.
4.5 kg 20 kg
2.3 L 10.2 L
Epicon Grout S EPOXY GROUT. An unfilled grout for small gap and crack widths between 0.25 and 6mm. Also suitable for injection applications.
5.0 kg 4.5 L
Epicon Grout H THIXOTROPIC EPOXY GROUT designed to be pumped for horizontal applications.
3 kg 2.3 L
Epicon Injection Resin L.V
A low viscosity EPOXY INJECTION RESIN for injection into concrete, masonry and brickwork to consolidate the structure and prevent ingress of moisture.
0.25 Kg 0.5 Kg 1 Kg
0.2 L 0.4 L 0.9 L
Epicon Injection Resin Thixotropic
THIXOTROPIC EPOXY INJECTION RESIN designed to flow freely while under pressure.
0.25 kg 0.5 kg 1 kg
0.2 L 0.4 L 0.9 L
Injection Resin Kit
A prepacked kit containing EPICON INJECTION RESIN and all ANCILLARY EQUIPMENT to enable small scale crack injection to be carried out by experienced operatives. Available in either low viscosity or thixotropic versions.
0.9 L
Nuwash A powerful SOLVENT CLEANER used to clean all tools and equipment which have been in contact with resin based materials.
5 L 20 L
N/A
Cemrok/ Easi-Flow/GA
Grout which is blend of low alkali high specific surface portland cements and other cementitious binders combined with high purity aggregates and a system of compatible admixtures. It is a high fluidity grout that will neither bleed or shrink.
20 kg 13 L
21CONSTRUCTIONACCESSORIES
Product:
PROTECTIVE COATINGS FOR CONCRETE
Product Description Pack Size Coverage Yield
Covercrete ANTI CARBONATION COATING which also provides a highly durable weather resistant surface. This water based protective coating is available in a range of attractive colours. Tested by Taywood.
5 L 6 - 8 m² per Litre
Cleargard Two component water based, low odour, environmentally friendly, CLEAR non-sacrificial ANTIGRAFFITI COATING for internal and external application which is non yellowing and weather resistant for the protection of a wide range of surfaces.
5 kg 6 m2 per kilo
Nucryl CLEAR ANTI CARBONATION COATING. A solvent borne ACRYLIC treatment with excellent resistance properties that protects substrates from aggressive atmospheric contaminants.
5 L 5 - 10 m² per Litre
Epigard Two component resin extended EPOXY COATING, characterised by its inbuilt flexibility, excellent adhesion and resistance to alkalis, water and a wide range of chemicals. For bridge abutments, walls and bunds.
5 kg 4 - 6 m² per kilo
Nuproof ALKALI RESISTANT RUBBERISED BITUMINOUS COATING with excellent adhesion to sound building materials including asphalt surfaces. Flexible at low temperatures and resists softening. Ideal as a flexible waterproof membrane on bridge abutments and external walls prior to backfilling
25 L 200 L
2 m²per Litre
Blockseal Standard
Solvent borne CLEAR polyurethane SEALER designed to stabilise jointing sand and protect concrete BLOCK PAVING.
20 L 3 m² per Litre
Blockseal Environmental
ENVIRONMENTALLY FRIENDLY PU EMULSION SEALER designed to stabilise joints and protect concrete BLOCK PAVING.
25 L 3 m² per Litre
Fungicidal Wash
KILLS MOSS OR LICHEN or alternatively to treat surfaces where moss and lichen have been physically removed prior to painting.
5 L 25 L
N/A
Silane BHN (HA Compliant)
Provides an INVISIBLE WATER-REPELLENT TREATMENT for concrete. The deeply penetrating formula of Silane reacts with the inorganic substrate in the presence of moisture under acid or alkaline conditions to form a chemically bonded water-repellent barrier. Suitable for Highways Works and ENVIRONMENTALLY FRIENDLY.
25 L 200 L
0.6 L per m²
22CONSTRUCTION
ACCESSORIES
Product:
JOINT SEALANTS
Product:
ACCESSORIES
Product:
CHEMICAL ANCHOR
Product Description Pack Size Coverage Yield
Bituseal HOT POURED RUBBER/BITUMEN SEALANT for use as a horizontal sealant in concrete pavement. Conforms to BS2499.
20 kg A2
Nuwash A powerful SOLVENT CLEANER used to clean all tools and equipment which have been in contact with resin based materials.
5 L 20 L
N / A
HYPERSEAL® -expert-150
HYPERSEAL®-expert-150 is a novel low modulus expansion joint sealant, especially formulated to ensure bubble free cure even at very high temperature and humidity climatic conditions.
Product Description Pack Size Coverage Yield
Metal Sprayer 5 LITRE HEAVY DUTY SPRAYER with brass lance and trigger assembly. Suitable for application of oil products. Spares readily available.
1 N / A
Plastic Sprayer (5 Litre)
5 LITRE PLASTIC SPRAYER with brass lance and trigger assembly. 1 N / A
Product Description Pack Size Coverage Yield
Resicon 3 Resicon 3 Comprises a high performance rapid curing styrene free low odour chemical injection anchoring system based on modified epoxy acrylate resin. Primarily designed for heavy duty bonding of anchor studs, bolts, threaded bars sockets, rebar starter bars and dowels into reinforced and non-reinforced concrete rock and stone.
345ml
Resicon 5 Resicon 5 is a premium grade high performance solvent free low odour pure epoxy resin based chemical injection anchoring system. As a pure epoxy resin Resicon 5 offers excellent adhesion to steel and concrete and has the highest performance and load values of all our systems. Resicon 5 is designed for heavy duty anchoring of rebar, starter bars and dowels, anchor studs, bolts, threaded bars and sockets into reinforced and non-reinforced concrete rock and stone. Its non-shrink no sag extended cure time formula makes it ideal for large diameter deep and oversized drill holes. Suitable for use underwater and in submerged holes.
400ml
23CONSTRUCTIONACCESSORIES
Product:
ESTIMATING GUIDE
Joint Width (mm) x Joint Depth (mm) x Length (LM) = Quantity in Litres. 1000
Example: Joint Width 20mm 0.02 x 0.01 x 20 = 4 litres Joint Depth 10mm 1000Joint Length 20LM mm = millimetres LM = Linear Metres
2025323845506575
12 16 20 25 32 38 45 5011 - - - - - - -24 15 - - - - - -46 35 22 - - - - -84* 74 60 39 - - - - 113* 99* 78 40 - - - 154* 132* 95 55 - - 198* 178* 140* 100 58 - 291* 251* 196* 151 395 340* 295*
Hole Dia (mm) Bar Diameter (mm)
ESTIMATING GUIDE FOR GROUTS Volume of grout (cc) required per hole for 100mm bond length. These figures are for guidance only.
ESTIMATING GUIDE FOR SEALANTS AND GROUTS
*Confil grouts are recommended.
SPACERSPlastic, concrete and wire
25CONSTRUCTIONACCESSORIES
SECTION 3
Section Index
Plastic ..............................26
Concrete ..........................31
Wire ..................................33
Accessories.....................34
26CONSTRUCTION
ACCESSORIES
15/4-12 5000 100000 20/4-12 4000 72000 25/4-12 2500 45000 30/4-12 1500 30000 35/4-12 1000 18000 40/5-14 750 13500 50/5-14 500 9000
20/6-20 2000 40000 25/6-20 1000 36000 30/6-20 1000 20000 35/6-20 1000 16000 40/6-20 500 14000 50/12-20 250 7500
A20 / 4-20 1000 A25 / 4-20 1000 A30 / 4-20 1000 A35 / 4-20 1000 A40 / 4-20 1000 A50 / 4-20 1000 A60 / 4-20 1000
cover/bar dia (mm) Bag Qty Plt Qty
cover/bar dia (mm) Qty per bag
For fixing spacing of vertical reinforcements - available to suit various bar diameter and cover
A strong economical general purpose spacer that can be used in vertical or horizontal applications - suits bars ranging from 4-20mm
Product:
PLASTIC SPACERSWHEEL SPACERS
Product:
PLASTIC SPACERSA SPACER
27CONSTRUCTIONACCESSORIES
15mm 100 6600 20mm 100 6300 25mm 100 4900 30mm 100 4200 35mm 60 3600 40mm 60 2400 50mm 60 1440 60mm 40 1200
15mm 100 5000 20mm 100 5000 25mm 100 5000 30mm 100 5000 35mm 80 3200 40mm 80 3200 50mm 80 3840
Cover Pack size Pallet qty mm mtr mtr
Cover Pack size Pallet qty mm mtr mtr
Spacer for light easy continuous stable support for mesh and reinforcement. Large lateral cut-outs allows for free flow of concrete. 2mtr lengths.
Stable spacer for lower reinforcement, with the following advantages.
• Does not break if stood on• Cannot Overturn • High load bearing capacity • No caviation due to optimum inclusion in the concrete • Avoids the formation of linear cracks in the concrete • 2mtr lengths
Product:
PLASTIC SPACERSTRIK TRAK
Product:
PLASTIC SPACERSZIG ZAG TRIK TRAK
28CONSTRUCTION
ACCESSORIES
15mm 3000 42000 20mm 3000 42000 25mm 2500 35000 30mm 2500 35000 35mm 2000 28000
cover/bar dia Qty per Pallet qty mm bag
Rod type spacer which offers minimal contact with the concrete face, primarily for use in precast factories. 2mtr lengths.
Plastic Support spacers , for vertical reinforcement with point-shaped formwork support and molded terminals to hook into reinforcement mats ( clamping distance : 150 mm).
Product:
PLASTIC SPACERSCENTIPEDE SPACER
Product:
PLASTIC SPACERSASKP SPACERS
15mm 100 3600 20mm 100 3600 25mm 100 3000 30mm 100 2400 40mm 50 1800 50mm 50 1500
Cover Pack size Pallet qty mm mtr mtr
Rod type spacer which offers minimal contact with the concrete face the uprights prevent movement of the rebar, primarily for use in precast factories. 2mtr lengths.
Product:
PLASTIC SPACERSCENTIPEDE SPACER WITH UPRIGHTS
15mm 6000 20mm 4800 25mm 4200 35mm 3600 40mm 3600
Cover Pack size Pallet qty mm mtr mtr
29CONSTRUCTIONACCESSORIES
Product:
TOWER SPACER Stable Spacer with pointed legs to ensure minimum visibility on the concrete surface
20/6-20 500 39000 25/6-20 500 36000 30/6-20 500 36000 35/6-20 500 34000 40/6-20 400 25600 50/6-20 375 24000
Cover/bar dia (mm) Qty per bag Pallet Qty
Product:
FLAT FOOT SPACERProvides stable support to reinforcing steel in ground floor slabs and its large base area prevents puncturing of polythene film the clip feature also allows for vertical application
40-50/6-12 200 10400 65-75/6-12 200 10000 90-100/6-12 100 5000
Cover/bar dia (mm) Qty per bag Pallet Qty
Product:
PILE CAGE SPACERSpecially designed for use with pile cages. Clip on Design allows for simple fixing to helical or main bars
50/6-20 200 5000 75/6-20 100 2500
Cover/bar dia (mm) Qty per bag Pallet Qty
30CONSTRUCTION
ACCESSORIES
Product:
PAVING SUPPORT SPACER
Product:
ADJUSTABLE PAVING SUPPORTS
These stackable fixed height supports are ideal for paving on straightforward projects. They act as a guide when laying paving, ensuring uniform position.
Unlike stackable support pads, which can only be altered in height by doubling, tripling in size, or by adding levelling shims. (often a frustrating and time consuming operation) Wallbarn Adjustable Plastic Paving
Support Pads are designed to be rotated. at the head so that the height can be very finely adjusted, to take into account small, continuous and irregular differences in the levels of a particular area.
15mm 150mm 175 5250
35-50mm 120mm 208mm 2.2mm 18.5mm 400kg 25 units per box 50-70mm 120mm 208mm 2.2mm 18.5mm 400kg 25 units per box 65-100mm 120mm 208mm 2.2mm 18.5mm 400kg 25 units per box 95-130mm 120mm 208mm 2.2mm 18.5mm 400kg 25 units per box 125-160mm 120mm 208mm 2.2mm 18.5mm 400kg 25 units per box 155-190mm 120mm 208mm 2.2mm 18.5mm 400kg 25 units per box 185-220mm 120mm 208mm 2.2mm 18.5mm 400kg 25 units per box
Height Diameter Box Qty Pallet Qty
Height Head diameter Base plate diameter Lug width Lug Height Weight tolerance Quantities
31CONSTRUCTIONACCESSORIES
25mm 30mm 60mm
40mm 50mm 60mm 75mm
800600180
400350180150
Cover mm Pallet qty mtrs
Cover mm Pallet qty mtrs
Square
Concave
Product:
CONCRETE SPACERSCONCRETE BAR
Concrete bar spacers are used to ensure that the concrete cover specified for structures and structural elements made 3 of reinforced concrete is adhered to both before and during concreting.
These spacers may also be used on polyurethane membranes - they accurately seperates shutters in walls and beams and can also be used as kickers and formwork spacers.
25/3040/5050/60
202530354050
35/40/50
500 20000200 12000125 5000
600 24000480 19200380 15200340 13600300 12000215 8600
200 12000
Cover mm Bag Qty Pallet Qty
Cover mm Bag Qty Pallet Qty
Cover mm Bag Qty Pallet Qty
Double Cover (Arch Based)
Spacer with plastic clip
Triple Cover
32CONSTRUCTION
ACCESSORIES
Product:
CONCRETE SPACERSWide range of heavy duty spacers for accurate placing of both horizontal and vertical reinforcement and mesh provides maximum stability under normal loading conditions
60/75 50 4000
Cover mm Bag Qty Pallet Qty
Double Cover (Flat Based)
33CONSTRUCTIONACCESSORIES
Square
Square
Product:
WIRE SPACERS
Spacer for supporting fabric in ground floor slabs and spacing fabric in walls. Supplied in standard 2m lengths.Available in Light Duty & Heavy Duty versions.
AL/ARAL/ARAL/ARAL/ARAL/ARAL/ARAL/ARAL/ARAL/ARAL/AR
A/AHDA/AHDA/AHDA/AHDA/AHDA/AHDA/AHDA/AHDA/AHDA/AHDA/AHDA/AHDA/AHD
507590105120135150165180200
507590105120135150165180200230260300
4444444
4.54.54.5
4.74.74.74.74.74.74.74.74.74.74.74.74.7
2.82.82.82.82.82.82.8333
3.33.33.33.33.33.33.33.33.33.3445
2.82.82.82.82.82.82.8333
2.82.82.82.82.82.82.8333
3.33.34
2222222222
2222222222222
0.310.3240.3330.3440.3550.3660.3790.4620.4770.497
0.430.4450.460.470.4850.5
0.5150.5350.550.5750.771.101.32
50505050505050505050
50505050505050505050404040
500 500 500 500 500 500 500 500 500 500
500500500500500500500500500500200200200
Type Height Bar Size Length Weight Small Pack Large Pack (mm) (mm) (mtr) (kg per mtr) (mtr) (mtr)
Type Height Bar Size Length Weight Small Pack Large Pack (mm) (mm) (mtr) (kg per mtr) (mtr) (mtr)
LIGHT DUTY WIRE SPACER
HEAVY DUTY WIRE SPACER
34CONSTRUCTION
ACCESSORIES
Product:
BLACK ANNEALED TYING WIRE
17 12kg
GAUGE COIL WEIGHT
Product:
SS TYING WIREStainless Steel Tying Wire is used where there is a risk of staining 18 20kg
GAUGE COIL WEIGHT
Product:
KNIPEX WIRE CUTTERSIndustries Best Wire Cutters - First choice for Steel Fixers
Product:
WIRE TIESAlternative to Tying Wire, just wrap around the reinforcing bar and pull with the Tying Tool 150 1000
200 1000
LENGTH MM PACK SIZE
Product:
TYING TOOLTool for use with the WireTies
Product:
WIRE BINDERSEasy to use Wire Binders - no cut offs & requires no tools 8-12 9600
8-16 6000 8-20 4000
BINDER SIZE PACK SIZE
35CONSTRUCTIONACCESSORIES
FORMWORK ACCESSORIES
37CONSTRUCTIONACCESSORIES
SECTION 4
Section Index
Formworks ......................38
38CONSTRUCTION
ACCESSORIES
Product:
END CONES Plastic cones used for support of shuttering pans at the end of tubing.
22 10 500 22 50 250 26 10 250 26 50 250
Sizes (mm) Height (mm) Pack Size (no)
Product:
THREADED END CONESPlastic cones used for support of shuttering pans at the end of tubing.
22 30 250
Sizes (mm) Height (mm) Pack Size (no)
Product:
GROOVE CAPUsed instead of cones but not removed after pouring the concrete. The ribs provide a good bond with the concrete and improve water impermability.
26 20 250
Sizes (mm) Height (mm) Pack Size (no)
Product:
GROOVE PLUGThe groove caps are closed with the groove plug at both ends eliminating the need for rubber stoppers or Tiestop.
26 500
Sizes (mm) Pack Size (no)
39CONSTRUCTIONACCESSORIES
Product:
SST FORMWORK PLUG A plastic plug to close holes in the formwork.
22-25 30 500
Sizes (mm) Height (mm) Pack Size (no)
Product:
PLASTIC KICKER W/O NAIL
Plastic Kickers are used to loacte the formwork panel at the base of walls. They are fixed using masonry nails.
48 30 100
Sizes (mm) Height (mm) Pack Size (no)
Product:
TUBING Rough rigid tube used as a spacer between formwork that allows the tie bar to be removed for reuse.
22 2 100 26 2 100
Sizes (mm) Height (mm) Pack Size (no)
Product:
AQUA PLUGSoft elastic PVC plug for sealing Flexible tight fitting for internal sealing of plastic sleeves prior to filling with Tiestop.
22 500 26 500
Sizes (mm) Pack Size (no)
40CONSTRUCTION
ACCESSORIES
Product:
TIESTOP SEALER
Product:
SCREED CHAIR PLASTIC
Product:
PLASTIC SHIM
Product:
VOID FORMER
For filling of tie holes formed by formwork bolts in new construction particularly where a rapid setting, durable, waterproof mortar is required.
Light duty plastic screed chair,completely adjustable and can be left in concrete. Plastic Screed Chairs are made up from three components, base, collar & saddle.
Used for alignment and levelling of heavy section steel plate and pre-cast concrete sections.
Void Formers are used in on ground concrete slabs to reduce the volume of concrete whilst maintaining the overall strength of the slab.
8kg
Sizes (mm)
2 70x70 250 3 70x70 250 5 70x70 125 7 70x70 125 9 70x70 125 20 70x70 50
Sizes (mm) Height (mm) Pack Size (no)
20x10 3mtrs 20x20 3mtrs
Sizes (mm) Pack Size (no)
Saddle 250 Collars 250 Bases 250
Sizes (mm) Pack Size (no)
41CONSTRUCTIONACCESSORIES
Product:
DOWEL BARS
Product:
DOWEL BAR CAPS
Product:
DOWEL BAR SLEEVES
Product:
CHAMFER WITH FLANGE
Mild Steel plain round bars with sawn end (cropped available on request). Finished in Stainless Steel, Galvanised or Polymeric available on request.
Other sizes available on request
The dowel bar cap has a compressible filler which allows for the expansion of dowel bars.
The PVC dowel bar sleeve act as a method of debonding the mild steel dowel bars.
Used for forming chamfered edges to columns and beams - the flanged profile allows for nailing to the formwork.
12x100 100 16x100 100 20x100 100 25x100 100
Sizes (mm) Pack Size (no)
12x450 100 16x300 100 20x300 100 25x300 100
Sizes (mm) Pack Size (no)
11mm 100 15mm 100 20mm 100 25mm 50
Sizes (mm) Pack Size (no)
12 900 16 600 20 600 25 600
Sizes (mm) Pack Size (no)
42CONSTRUCTION
ACCESSORIES
Product:
CHAMFER WITHOUT FLANGE
Product:
BOLT BOXES
Used for forming chamfered edges to columns and beams.
Used to position holding down bolts in concrete bases.
11mm 100 15mm 100 20mm 100 25mm 50
Sizes (mm) Pack Size (no)
225 24 300 24 375 24 450 24 600 24
Light Duty Size (mm) suits up to bolt size (mm)
225 24 300 24 375 24 450 24 600 24
Heavy Duty Size (mm) suits up to bolt size (mm)
229 16 305 16 380 20 457 24 534 24
Wax Size (mm) suits up to bolt size (mm)
43CONSTRUCTIONACCESSORIES
Product:
CONSTRUCTION OILS
Vegetable oil based release agent 25 L, 210 L, 1000 L 25-60m2 per litre
Omnilease Bio Pack Size Coverage Yeild
Chemical release agent 20 L, 205 L 18-30m2 per litre
Logco-lease Pack Size Coverage Yeild
Product:
K-FORM UPVC SCREED RAIL
Made from recycled materials, K-FORM is lightweight, durable and does not require removal after concrete pouring. It is easily cut to length on site and has pre-drilled holes in the vertical face for locating steel dowel bars and in the base for mortar anchoring. Furthermore, K-FORM’s patented design features a built in expansion joint, end clips for joining and a removable top strip for joint sealing.
85 100-140 3000 135 150-225 3000
Height (mm) for Slab Depth (mm) Unit Length (mm)
44CONSTRUCTION
ACCESSORIES
Product:
BOTTOM CRACK INDUCER
Product:
TOP CRACK INDUCER
Product:
HYRIB
Product:
POLYTHENE
Used where a vertical crack formed from the base of the slab is required.
Used in external concrete slab areas where the joint has to be sealed - the top part is removed after the concrete has set to facilitate sealing.
This is an expanded metal sheet product, designed to use as permanent formwork - it creates a mechanical key for the second phase pour.
Manufactured from high quality recycled polyethylene for use in solid concrete ground floors to protect buildings against water from the ground providing an effective barrier against liquid or water vapour for the lifetime of the concrete slab in which they are installed.
50 5
Sizes (mm) Pack Size (no)
445x 2mtr per sheet
Sizes Pack Size
125 500 200 250 1000 100 300 1200 100
MU Gauge Roll Size (m2)
40 5
Depth (mm) Length (mtr)
45CONSTRUCTIONACCESSORIES
Photo courtesy of Felix O’Hare
46CONSTRUCTION
ACCESSORIES
Product:
DWYIDAG BAR
Product:
DWYIDAG WALER PLATES
Product:
DWYIDAG WING NUTS
Product:
DWYIDAG HEXAGONAL WELDABLE NUTS
A highly effective system of high tensile steel bar designed for holding formwork panels in place. The original, high quality DYWIDAG Threadbar may not be welded due to its chemical composition and must be protected against all kinds of weld spatter.
Couplers for the force-fit connection of two threadbars. A stop pin in the middle of the coupler ensures an equal screwing-in length of both bars.
With different Waler Plates, Wing Nuts can be used as anchor nuts both for timber and steel walings. overcome by applying hammer strokes to the wings. They can be fixed and loosened using a hexagon wrench or a threadbar. If necessary, a clamping effect can be attained or overcome by applying hammer strokes to the wings.
Used as an alternative to the wing nut when access is restricted.
Hex Nuts - designed to take the full bar load1)
15 15/17 St 900/1100 195 90 20 20/23 St 900/1100 345 160
Bar Ø Steel Grade Max. Load Working Load Weight [mm] [mm] [kN] [kN]
15 55 27 0.35 20 60 36 0.48
Bar Ø Height Hex Weight [mm] [mm] [mm] [kg/pc.]
15 105 30 0.45 20 130 36 0.74
Bar Ø Length Hex Weight [mm] [mm] [mm] [kg/pc.]
15 50 30 Yes 0.22 20 70 36 Yes 0.4
Bar Ø Length Hex Weldable Weight [mm] [mm] [mm] [kg/pc.]
47CONSTRUCTIONACCESSORIES
Product:
DWYIDAG CONNECTORS
Product:
EXPANSION SHELLS
Couplers for the force-fit connection of two threadbars. A stop pin in the middle of the coupler ensures an equal screwing-in length of both bars.
Expansion shells are used for fixing single-sided shuttering or similar structures in rock, concrete or comparable load-bearing ground. When installing expansion shells, please consult the separate installation instructions available on demand.
15 105 30 0.45 20 130 36 0.74
Bar Ø Length Hex Weight [mm] [mm] [mm] [kg/pc.]
15 35-38 0.3 20 43-48 0.48
Bar Ø Borehole Ø Weight [mm] [mm] [kg/m]
48CONSTRUCTION
ACCESSORIES
Product:
ROBUSTA DROP IN ANCHOR
A drop in Anchor specifically designed for the use with 15mm Formwork Tie Rod Bars. It is ideal for low load applications, such as fixings for hand rails into existing con. For safety reasons we state that admissible loads for a low concrete strength of 15 M/mm. This means in practice that the anchors are often installed the next day after concreting and are already loaded.
Drop In Anchor 15mm 0.2
ITEM WEIGHT Kg
Axial Tension 17 21.9 26 Diagonal Pull 45 21.5 27.8 32.8 Shearing 90 27.5 35.5 42
Load Direction 15 N/mm 25 N/mm 35 N/mm
Concrete Strength
Product:
HEXAGON STOP END SLEEVE
Product:
TIE BAR FORM ANCHOR
Made from Concrete friendly synthectic material to allow installation of Dwyidag bar.
The Form-Anchor is versatile, noncorrosive and used mainly for securing single-sided and climbing formwork. Easily fixed using the plastic cone locator enabling quick formwork erection, with no drilling of plywood. Can also be used for securing slab edge formwork, guard rails, etc. For use with 15mm Dywidag Tie Rods.
130mm 65mm 100kn 50kn
O/A LENGTH THREAD LENGTH FAILING LOAD SAFE WORKING LOAD
15mm
Bar Ø
49CONSTRUCTIONACCESSORIES
Photo courtesy of Felix O’Hare
50CONSTRUCTION
ACCESSORIES
Product:
JOINTSTRIP
Product:
FIBRE FILLERBOARD
Product:
JOINTSTRIP EXPANCELL SHEETS
Jointstrip is a closed cell cross linked polyethylene foam which provides a fast, efficient and cost effective system for all brick and concrete expansion joints It has proven to be excellent for isolating structural components and forming joints in concrete slabs.
Bitumen impregnated fibre fillerboard. It has excellent resistance to compression with outstanding recovery characteristics.
Expancell is a closed cell polyethylene foam. It offers an easy and efficient method of forming expansion voids in brickwork, blockwork and concrete.
High Density Sheets also available on request
2400x1200 12 2400x1200 20 2400x1200 25
Sheet Size (mm) Depth (mm)
2000x1200 12 2000x1200 15 2000x1200 20 2000x1200 25
Sheet Size (mm) Depth (mm)
100 10 10 150 10 10 175 10 10 200 10 10 250 10 10 300 10 10 100 20 2 150 20 2 175 20 2 200 20 2 250 20 2 300 20 2
Width (mm) Depth (mm) Roll Size (mtrs)
51CONSTRUCTIONACCESSORIES
Product:
EXPANSION CORD
Product:
TEXSLIP MEMBRANE
Product:
FOAM FROST BLANKETS
Closed cell Polyethylene Foam Cord in varying diameters. Used behind sealants and mastics in expansion.
Slip Membranes are produced from an ultra-heavy 250kg/m3 density polyethylene, 2mm in thickness, it is used in sliding joints where low friction resistance material is needed, but a high resistance to load is also required. Normally used in two layers to form a low friction load bearing sliding joint.
Lightweight concrete curing blanket - reusable and recyclable.
Can also be cut to size
6 2500 10 1150 13 750 15 550 20 350 25 200 30 160 40 270 50 180
2mm 100mtr x 1.2mtr
75x1.5mtr 24 kg/m3
Diameter (mm) Qty per Box (mtrs)
Depth Roll Size
Size Density
52CONSTRUCTION
ACCESSORIES
Product:
PERMEFORM
Product:
PROTECTION BOARD
Permeform is a fast and simple system for constructing in-situ concrete ground beams and pile caps. Developed to save money, time and labour, Permeform is proving popular with many contractors. Permeform Beam Forming System is designed to meet the individual size requirements of concrete ground beam forming in light commercial and house building development. An ideal product where ground beams are constructed in-situ onto piling or in unstable and contaminated ground situations.
Protection Board is used for the protection of floors, walls, windows, stairs and doors in the construction industry and especially during re-fits - it is lightweight and cost effective.
full sheets can be pre-cut to size, saving labour time on site
2.5x2.5 7 Black 2.5x2.5 7 White
1.22x2.44 2 Black
Sheet Size (mtr) Depth (mm) Colour
Sheet Size (mtr) Depth (mm) Colour
Product:
SAFETY CAPSHi Visibility Safety Cap to be placed on top of protruding rebar 6-18 250
16-32 250 40-50 100
BAR DIA PACK SIZE
53CONSTRUCTIONACCESSORIES
WATERPROOFING
55CONSTRUCTIONACCESSORIES
SECTION 5
Section Index
Waterproofing .................56
56CONSTRUCTION
ACCESSORIES
Product:
BITUSHEET XL & PROTECTION BOARD
Product:
DUAL SEAL MEMBRANE
Bitusheet XL membrane consists of a self-bonding polymer modified bitumen which is covered on one side by a tough multiply cross laminated polythene film and protected on the other side by a release sheet which is removed prior to the bonding of the material onto a suitably prepared substrate. Once the release sheet has been removed the membrane can be easily applied by roller pressure. Incorporates a 50mm selvedge on one edge to form homogenous overlap joints. Bitusheet XL is intended for use as a self-bonding vertical or horizontal damp proof membrane in tanking below ground structures, subways and retaining walls. BBA Approved.
Bitusheet XL Roll Size 19.05Mtr X 1.05Mtr Roll
Bitusheet Protection Board: 2Mtr x 1Mtr Sheet
Dual Seal is a high performance self-swelling, self-healing waterproofing membrane comprising of a thick, tough, high density polyethylene sheet laminated to 4kg/m2 of quality Bentonite granules. The Bentonite used in the manufacture of Dual Seal is capable of repeated cycles of wetting and drying without deterioration of its sealing properties and has a life expectancy measured in thousands of years (BBA Certified). It has WRAS approval for use with potable water. Dual Seal membrane has been specifically developed for use as a high performance waterproofing membrane to provide a totally watertight barrier in below ground concrete construction, including basements, underground car parks, plant rooms, access tunnels etc. Dual Seal Membrane can be installed in damp conditions and is, therefore, particularly suitable for use as a roof waterproofing system for earth covered potable water reservoirs.
Dual seal Roll Size 1.22Mtr x 7.32Mtr Roll
57CONSTRUCTIONACCESSORIES
Product:
FRADIFLEX
Product:
BUTYL-NEK COMPRESSION SEAL
Product:
SYNKO-FLEX WATERSTOPButyl-Nek & Synko-Flex Emulsion Primer – available in 5ltr drums
Butyl-Nek & Synko-Flex Emulsion Primer – available in 5ltr drums
Fradiflex is a metal water stop for a watertight concrete construction joint. Fradiflex has a 1mm special coating and a roll length of 25metres ensuring a very reliable cost effective sealing system.
Fradiflex can be used as per the requirements of utility classes A & B and of straining classes 1 & 2.
Width Roll Length150mm 25 mtr
Butyl-Nek preformed plastic joint sealant is a special blend of butyl and asphalt extruded into convenient coil lengths for the sealing of precast products. Designed for vertical and horizontal applications of Storm Sewer Pipe, Box Culverts, Culvert Manholes, Septic Tanks, Utility & Burial Vaults, and Wet Wells regardless of shape or size.
Size Roll Length Box Qty 12x60 6mtr 24mtrs22x22 4.5mtr 36mtrs25x40 4mtr 16mtrs
Synko-Flex Waterstop is a single-component, self-sealing adhesive compound, extruded in a square cross-section between two quick-release protective wrappers. It bonds to cured concrete surfaces and fuses with fresh concrete during the hydration and curing process to achieve a watertight seal within cold joints at the footing, walls and slabs on a wide variety of concrete structures. It does not rely on swelling to achieve its watertight seal and therefore, it is unaffected by rain or wet conditions which may occur prior to joint completion. Synko-Flex also provides a simple long-term solution for effectively sealing pipes, sleeves, and collars which are embedded or cast into concrete walls or floor slabs.
Size Roll Length Box Qty 25x25 4mtr 24mtrs25x40 4mtr 16mtrs
58CONSTRUCTION
ACCESSORIES
Product:
HYPERDESMO® - HAA
Product:
HYPERDESMO® - PB 2K
HYPERDESMO®-HAA is a unique single component polyurethane liquid membrane, based on the successful combination of Hyperdesmo and Accelerator 3000 which throughout the years has provided applicators with a solution for a fast curing, bubble free thick layer membrane. Our commitment to R&D and investment and our efforts to continuously upgrade our Chemical processing plant has allowed us to formulate a Hyperdesmo® with the Accelerator 3000 incorporated in a blocked fashion, that upon contact with humidity is released and self-accelerates the curing of the material in a similar manner as the Accelerator 3000. Due to its unique formulation, it cures rapidly to form a completely defect free membrane with excellent mechanical and elastomeric properties. This product is ideal for use during the winter months or in climates with relatively low humidity. Furthermore, the fact that the minimum consumption can now be achieved in only one coat, reduces labour cost and eliminates previous drawbacks of the Hyperdesmo® + Accelerator system such as short working time or problems associated with using Hyperdesmo on its own in multilayer coats adhesion failure.
APPLICATIONS• Gypsum and cement boards• Polyurethane insulation foams• Verandas and balconies• Roofs• Light roofing made of metal or fibrous cement• Asphalt membranes• EPDM membranes
HYPERDESMO®-PB-2K is a fast-curing, two component, bitumen-extended polyurethane fluid.
It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties. It is based on a pure elastomeric hydrophobic polyurethane resin extended with chemically polymerised virgin bitumen.
APPLICATIONS• Gypsum and cement boards• Polyurethane insulation foams• Asphalt membranes• EPDM membranes• Bathrooms (under tiles)• Verandas and balconies (under tiles)• Flower pots and roof-top gardens• Light roofing made of metal or fibrous cement• Non-potable water tanks• Basements• Foundations• Bridge platforms• “cut-and-cover” tunnels• Irrigation channels
Novel, all weather rapid curing, single component polyurethane liquid membrane for waterproofing and protection based on Humidity-Activated-Accelerator,Technology.
Two-component - 1:1, polyurethane (A) : bitumen (B), by volume - liquid membrane for waterproofing & protection.
59CONSTRUCTIONACCESSORIES
Product:
HYPERDESMO® - PB MONO
Product:
HYPERDESMO® - ADY-E
HYPERDESMO®-PB-Mono is a quick-curing, one component, thixotropic, bitumen-extended polyurethane fluid. It produces a hydrophobic, elastic membrane with very strong adhesion to most types of substrates, as well as bituminous, and excellent mechanical and chemical resistance properties. It is ideal for application on vertical surfaces: No running, no bubbling. It is based on pure elastomeric hydrophobic polyurethane resin and is extended with chemically polymerised virgin bitumen.
APPLICATIONS• Gypsum and cement boards• Asphalt membranes (for repair also)• Cementitious substrates• Roofs• Light roofing made of metal or fibrous cement• Basements• Foundations• Closed spaces with high humidity
HYPERDESMO®-ADY-E is a one-component polyurethane fluid which cures with the humidity in the atmosphere to produce a transparent membrane, of increased elasticity, with uniform adhesion over the entire surface. It is aliphatic: No yellowing as a result of direct exposure to sunlight. It is ideal for colour protection ofHYPERDESMO® products. It is based on pure elastomeric hydrophobic polyurethane resin, which results in excellent mechanical, chemical, thermal, UV and natural element resistance properties.
APPLICATIONS• Top-coating (pigmented) HYPERDESMO® and HYPERDESMO®-LV• Top-coating flooring applications (pigmented)• Protecting concrete or synthetic coats
One component, polyurethane - bitumen liquid membrane for flashing, waterproofing & protection.
One-component, transparent, glossy, aliphatic, elastic polyurethane liquid membrane.
DEPTH 5mm 24 12 10mm 4 3 2.4 15mm 1.6
WIDTH 5mm 10mm 15mm 20mm 25mm
Linear meters per 600cc sausage:
60CONSTRUCTION
ACCESSORIES
Product:
HYPERSEAL®-EXPERT-150
Product:
BARREL GUN
Product:
CONSUMPTION CHART FOR HYPERSEAL®-EXPERT
Features:• Excellent Thixotropy• Low modulus, joint movement
accommodation 50%.• Excellent chemical resistance, suitable
for sealing joints in swimming pools and chemically treated water.
HYPERSEAL®-expert-150 is a novel low modulus expansion joint sealant, especially formulated to ensure bubble free cure even at very high temperature and humidity climatic conditions.
Applicator gun to suit HYPERSEAL®-expert
61CONSTRUCTIONACCESSORIES
Product:
ISOSTUDISOSTUD is a studded membrane in high density polyethylene (HDPE) which offers great resistance to all chemical agents and to mechanical compression (>200 KN/m²). ISOSTUD is used to protect bituminous membranes, face walls and foundations. ISOSTUD can also be used for terraces, flat roofs and roof gardens. The studs are aligned along vertical and horizontal axis: water can easily and rapidly drain from the top to the bottom of the foundation (whereas HDPE membranes with studs diagonally aligned do not offer this advantage and water drains slowly).
Depth – 8mmRoll Size – 2x20mtrs
62CONSTRUCTION
ACCESSORIES
Product:
PC® BENTOSTRIP - HYDROPHILIC JOINT SEALANT
Product:
PC® ELASTOSWELL - HYDROPHILIC SWELLSTRIP
COMPARISON CHART BENTOSTRIP v ELASTOSWELL
PC® Bentostrip is a hydrophilic joint sealant composed of natural sodium bentonite clay and rubber.
The PC® Bentostrip joint sealants is used for the waterproof sealing of construction joints in concrete.
Size: 19x25mmPacking: 5mtr rolls – 30mtrs per box
PC® Elastoswell is a hydrophilic swellstrip consisting of an acrylate based polymer swelling substance embedded in a butylene co-polymer based thermoplastic elastomer.
PC® Elastoswell is used for:• Waterproofing casting and header joints in concrete• Waterproofing pipe lead-throughs.• Waterproofing joints between prefab concrete elements.• Waterproofing around all sorts of lead-throughs and construction joints (stationary joints).• Waterproofing connecting joints.
Size : 20x10mm Packing: 10mtr rolls – 90mtrs per box
Swelling Capacity 4V Min 10V Dimensional Stability in Cracking Stable contact with water Tensile Strength (EN ISO 527) 0.196 MPa 0.7 MPa Elongation (EN ISO 527) 14.37% 300% Swelling in salt water No Yes Water Pressure resistance (Apb) 2 bar 2 bar Reswelling dry-wet cycles Yes Yes
Characteristic PC Bentostrip PC Elastoswell
63CONSTRUCTIONACCESSORIES
Product:
PERMESEAL WATERSTOP
A specially designed PVC high performance waterstop suitable for both internal and external use. Specifically developed to seal joints (watertight) in concrete structures which protects the reinforcing steel against corrosion attack.
Sizes Internal Wall - 200mm x 15m roll External Floor- 200mm x 15m roll
Internal Wall - 250mm x 15m rollExternal Floor- 250mm x 15m roll
Bespoke joints manufactured to your requirement. Standard joints available ex-stock.
64CONSTRUCTION
ACCESSORIES
Product:
HA SAFEFOAM NF – INJECTION RESIN
Product:
HA CUT – INJECTION RESIN
Product:
PACKERS
Environmentally safe, low viscosity hydrophilic polyurethane injection resin designed for grouting joints or repairing leaks in concrete structures, sewer joints, tunnels, moving and non - moving joints.
Pack Size – 5kg & 25kg
1-component, low viscosity, hydrophobic, aqua-reactive, rigid polyurethane injection grout for cutting off gushing water leaks with a high flow rate and/or high hydrostatic pressure.
Pack Size – 25kg
13mm x 120mm injection packer used as a connection piece between the injection pump and the building component. Other sizes available on request.
Product:
AQUATEK PLUG & AQUATEK PLUG XF
Stops active water leaks and seepage, even under high pressure through joints, cracks, honeycombing and holes in all structures made out of concrete, masonry, stone and renders.
Aquatek Plug has a final setting time of 3 minutes and Aquatek Plug XF of 30 seconds.
Aquatek Plug – 25kg
Aquatek Plug XF – 10kg
65CONSTRUCTIONACCESSORIES
Product:
SIKA SWELL S - 2
Product:
ECOWASH
A one component, gun applied swellable sealant system, for fast application and suitable for use on rough surfaces which swells in contact with water, for sealing waterproof-structures.
Pack Size - 600 ml
Safe and powerful agent for cleaning PU and epoxy resins from equipment after use.
Pack Size – 25kg
ACOUSTICS
67CONSTRUCTIONACCESSORIES
SECTION 6
Section Index
Underscreed ...................68
Estra 3d 8/4 .....................69
Damtec Rubber ...............70
Product:
ACOUSTIC INSULATION UNDER SCREEDMADE FROM RECYCLED RUBBER GRANULESSOLUTIONS FOR CONSTANT LOADS UP TO 20T/M2
ACOUSTIC INSULATIONFEATURES AND BENEFITS
FEATURES AND BENEFITS:• European Technical Approval (CE label)• Brilliant noise insulation with a low
panel thickness• Outstanding compressive strength and
Load-bearing performance permanently elastic
• Highest resiliency even after years of use (does not compress and reduce sound absorption)
• Very low emission• Water proofed and rot-proofed• Very environment-friendly, recycled rubber• Can be recycled again• Fast and easy installation• High pressure load capacity• Elasticity and fast and easy installation
low thickness of 4mm to 17mm for low• Allowing planners to save heights in new
buildings or adapt to given conditions in the case of renovation.
Applications• Production halls and depots• Shopping centres• Concert halls, cinemas• Fitness centres• Public buildings• Schools, training centers• Recording studios• Acoustic test laboratories• Hotels
Product Δ LW Max. Continous Load Dynamic Stiffness
DAMTEC® estra
DAMTEC® estra 3D 8/4
DAMTEC® system
DAMTEC® 3D 17/8
≤ 21 dB
≤ 26 dB
≤ 21 dB
≤ 30 dB
0.20 N/mmÇ
0.10 N/mmÇ
0.05 N/mmÇ
0.10 N/mmÇ
≤ 90 MN/mÑ
< 20 MN/mÑ
≤ 35 MN/mÑ
< 15 MN/mÑ
68CONSTRUCTION
ACCESSORIES
Application SectorDAMTEC® estra 3D is the ideal rubber underlay in floating screed / concrete slab systems with European Technical Approval, which has been granted by DIBt, the German Center of Competence in Civil Engineering.
Another application is for example underneath rigid floor elements on wooden sub floors. Also as edge strip it can be cut.
DAMTEC® estra 3D is particularly quick and easy to install and is providing extremely high resistance to compressive loads and outstanding elasticity. It is equally well suited for applications in residential, office and commercial buildings.
MaterialGranules of recycled rubber with PU elastomer bonding agent.
AppearanceColour: MulticolourSurface: Smooth with granular texturing profiled on one side
Product:
ESTRA 3D 8/4IMPACT SOUND IMPROVEMENT UNDER SCREED: ≤ 26 DB
TECHNICAL DATA
Material Granules of recycled rubber with PU elastomer bonding agent
Area weight 3,800 - 4,800 g/m²
Thickness 8/4 mm (± 1.0 mm)
Roll width 1,250 mm (± 1.5 %)
Roll length on request (± 1.5 %)
Surface smooth with granular structure
Lower side wave profile
Colour black / multicoloured
Maximum pressure 0.10 N/mm² (in accordance with EN 826)
Dynamic stiffness 8/4 mm < 20 MN/m³ (EN 29052)
Service temperature range -30°C up to + 80°C
Impact sound improvement ΔLW 22dB (under 50mm screed, 120kg/m²)
26dB (under 80mm screed, 179kg/m²)
Edge Strip(e.g. Damtec® Estra 3D 8/4)
Floor Covering (Tiles or other floor covering)
AdhesiveScreedPE Membrane
Damtec® Estra 3D 8/4
Levelling Layer (Where necessary)
Concrete Floor
69CONSTRUCTIONACCESSORIES
Product:
DAMTEC® RUBBER Application SectorDAMTEC® rubber is a floor underlay for footfall sound reduction and thermal insulation; used in building construction and renovation, Suitable for underscreed applications and can also be used above screed especially in wet rooms under ceramic tiles.
Material Fine granules of recycled rubber with PU elastomer bonding agent.
Appearance Colour: BlackSurface: Fine granular texture.
TECHNICAL DATA
Dimensions/Tolerances Width: 1,000 mm ± 1.5 % Length: on request ± 1.5 % Available thickness: 3, 4, 5 and 6 mm ± 0.3 mm Density: approx. 800 kg/m³
Physical Characteristics Tensile strength: approx. 0.6 N/mm² (ISO 1798) Elongation at break: approx. 60% (ISO 1798) Service temperature range: - 30°C to 80°C Flammability rating: B 2 (DIN 4102-1) Heat transmission coefficient: 0.03 m² K/W for 3 mm slab (DIN 52612) Impact sound improvement: ΔL = 20dB without covering ΔL = 17dB under 8 mm tiles (ISO 140-8/ISO 717-2)
70CONSTRUCTION
ACCESSORIES
71CONSTRUCTIONACCESSORIES
MISCELLANEOUS
73CONSTRUCTIONACCESSORIES
SECTION 7
Section Index
Testing .............................74
Caps and Tape ................74
74CONSTRUCTION
ACCESSORIES
Product:
CONCRETE TESTING EQUIPMENTFull range of fresh concrete Test Equipment available including
150mm 4 part Steel Mould Cube
Base Plate
Slump Cone Plastic curing tank for Site Use
100mm Double Plastic Mould Cube
Scoop
Tamping Rod
Product:
BARREL TAPSEconomical, chemical-resistant Tap works with many liquids. Available in Small & Large
Product:
TAPEMammoth Builders PVC tape is a strong tape with versatile adhesive ideal for jointing all PVC and polythene sheets and membranes. Ideal for contamination barrier fastening, dust sealing of sheets and many other uses in the construction industry.
Black 50mm x 33Mtr
COLOUR SIZE
Have you seen our other brochures?
Call or email us now to see our other products
Tel: +44 (0)28 37528 999 Email: sales@sdg.ie
PRECAST ACCESSORIES
PRODUCTCATALOGUE
PR
EC
AS
T A
CC
ES
SO
RIE
S
HYPERDESMO® LIQUID WATERPROOFING
PRODUCTCATALOGUE ACOUSTIC & VIBRATION CONTROL
PRODUCTCATALOGUE
AC
OU
ST
IC &
VIB
RAT
ION
CO
NT
RO
L
SDG Construction Technology Ltd. 21 Tullygoonigan Industrial Est., Moy Road, Armagh, BT61 8DRTel: +44 (0)28 37528 999 | Fax: +44 (0)28 37528 928 Email: sales@sdg.ie | Web: www.sdgconstructiontechnology.com
Face Communications | T: 028 3833 9100 | W: ourface.co.uk