Post on 21-Mar-2018
T u s kp r o s e r i e sF l o o r m a c h i n e s
T13Pro, T17Pro, T20Pro
Introducing regular duty floor machines that are far from ordinary — the Tusk™ Pro Series from Tundra™ Equipment Company.
Destined to become standard equipment for floor cleaning and maintenance companies everywhere, Tusk Pro Series floor machines are powered by best-in-class 1.0 and 1.5 HP, 66 frame dual capacitor AC induction motors that deliver 175 rpm cleaning speed.
Tusk Pro combines superior cleaning and versatility with improved efficiency and operator safety — and will fast become the envy of the crowded 13/17/20 inch floor machine market.
™
Specifications
T13 Pro 13” 1.0 66 open 120 @ 60HZ 175 NP 92 2-planet 102 lbs 5.1 @ 120~
T17 Pro 17” 1.5 66 open 120 @ 60HZ 175 NP 92 3-planet 123 lbs 6.75 @ 120~
T20 Pro 20” 1.5 66 open 120 @ 60HZ 175 NP 92 3-planet 127 lbs 7.5 @ 120~
Quick release 50’ safety yellow power cord
Adjustable handle with safety lock switch
Tusk™ Pro Series F l o o r M a c h i n e S
Dual capacitor “start/run” induction motorPolished aluminum and chrome all metal construction
Solution Tank Mighty-Lok
Tusk – a Breed apart
The Tusk Series pedigree is impressive. Every Tusk floor machine features heavy-duty one piece cast base assemblies and all metal construction with polished aluminum and chrome. Stainless steel handle assemblies with ergonomic handles are adjustable at operator hand height.
Effortless trigger levers and convenient safety lock switch boost operator protection and comfort.
Pad S
izeM
otor H
PM
otor F
rame
Moto
r Coo
ling
Rated
Volta
ge
Pad S
peed
Clutch
Plate
Gearbo
x
Total
Weig
ht
Amp Draw
Accessories
Application Matrix
T13 Pro x x x x
T17 Pro x x x x x x
T20 Pro x x x x x x
Dry Bu
ffing
Wet
Strip
ping
Spray
Buffin
gDiam
ond P
olish
ingCa
rpet S
hampo
oing
Ston
e Poli
shing
Woo
d Floo
r San
ding
Ston
e Grin
ding
Mas
tic Re
moval
Tundra Equipment Company Inc.
PO Box 1464, Summit, NJ 07902O: 1.800.482.5698 F: 908.665.0696 info@tundraec.com www.tundraec.com
™
T u s kH e A V Y s e r i e sF l o o r m a c h i n e s
Geared for heavy duty performance, Tusk™ Heavy Series floor machines are the next step up from our Pro Series machines, but a nice leap from heavy duty models offered by our competitors.
Designed by Tundra™ Equipment Company, the Tusk Heavy Series is an ideal solution when you need high performance with more substantial gear design. Our Heavy machines come standard with a triple planet gearbox which gives you a longer service life than other gear drives.
Tusk Heavy floor machines are powered by 1.5 HP, 66 frame TEFC induction motors that deliver 175 rpm cleaning speed.
™
Quick release 50’ safety yellow power cord
Adjustable handle with safety lock switch
Tusk™ heavy Series F l o o r M a c h i n e S
Dual capacitor “start/run” induction motorPolished aluminum and chrome all metal construction
Solution Tank
Tusk – a Breed apart
The Tusk Series pedigree is impressive. Every Tusk floor machine features heavy-duty one piece cast base assemblies and all metal construction with polished aluminum and chrome. Stainless steel handle assemblies with ergonomic handles are adjustable at operator hand height.
Effortless trigger levers and convenient safety lock switch boost operator protection and comfort.
Accessories
Application Matrix
T17 Heavy x x x x x x x x
T20 Heavy x x x x x x x x
Dry Bu
ffing
Wet
Strip
ping
Spray
Buffin
gDiam
ond P
olish
ingCa
rpet S
hampo
oing
Ston
e Poli
shing
Woo
d Floo
r San
ding
Ston
e Grin
ding
Mas
tic Re
moval
Tundra Equipment Company Inc.
PO Box 1464, Summit, NJ 07902O: 1.800.482.5698 F: 908.665.0696 info@tundraec.com www.tundraec.com
™
Specifications
T17 Heavy 17” 1.5 66 TEFC 120 @ 60HZ 175 NP 92 3-planet(with steel coupler)
125 lbs 7.3 @ 120~
T20 Heavy 20” 1.5 66 TEFC 120 @ 60HZ 175 NP 92 3-planet(with steel coupler)
132 lbs 8.1 @ 120~
Pad S
izeM
otor H
PM
otor F
rame
Moto
r Coo
ling
Rated
Volta
ge
Pad S
peed
Clutch
Plate
Gearbo
x
Total
Weig
ht
Amp Draw
Mighty-Lok
T u s ks U p e r H e A V Y F l o o r m a c h i n e s
The most extreme environments require machines built for extreme duty — introducing the Tusk™ T20 Super Heavy floor machine from Tundra™ Equipment Company.
This robust, durable floor machine provides superior performance for the toughest scrubbing, stripping and polishing applications. Our T20 Super Heavy machine features a triple planet gearbox with steel coupler and powerful 1.5 HP, 180 frame dual capacitor AC induction motor.
Our super heavy performance comes with new lows, too: Low vibration and low noise level. Move up to Tusk Super Heavy Series floor machines.
™
Quick release 50’ safety yellow power cord
Adjustable handle with safety lock switch
Tusk™ T20 Super heavy
Dual capacitor “start/run” induction motorPolished aluminum and chrome all metal construction
Tundra Equipment Company Inc.
PO Box 1464, Summit, NJ 07902O: 1.800.482.5698 F: 908.665.0696 info@tundraec.com www.tundraec.com
™
Solution Tank
Tusk – a Breed apart
The Tusk Series pedigree is impressive. Every Tusk floor machine features heavy-duty one piece cast base assemblies and all metal construction with polished aluminum and chrome. Stainless steel handle assemblies with ergonomic handles are adjustable at operator hand height.
Effortless trigger levers and convenient safety lock switch boost operator protection and comfort.
Accessories
Application Matrix
T20 Super Heavy x x x x x x x x x
Dry Bu
ffing
Wet
Strip
ping
Spray
Buffin
gDiam
ond P
olish
ingCa
rpet S
hampo
oing
Ston
e Poli
shing
Woo
d Floo
r San
ding
Ston
e Grin
ding
Mas
tic Re
moval
Weights
Specifications
T20 Super Heavy 20” 1.5 180 TEFC 120 @ 60HZ 175 NP 92 3-planet(with steel coupler)
152 lbs 9 @ 120 ~
Pad S
izeM
otor H
PM
otor F
rame
Moto
r Coo
ling
Rated
Volta
ge
Pad S
peed
Clutch
Plate
Gearbo
x
Total
Weig
ht
Amp Draw
Mighty-Lok
T u s kB U r N i s H e rStep up to the industry’s premier floor polisher with the Tusk T20 Burnisher. The superior performing T20 Burnisher is driven by a direct drive 1.5 horsepower DC motor that delivers 1500 rpm of consistant brush speed. The result is a glossy floor finish with few rivals. The T20 also provides the flexibility to dry polish or spray buff areas that might require a light chemical application for optimal cleaning.
The powerful direct drive motor helps the T20 Burnisher stand out from the pack — efficiently transferring power from the motor to the floor pad while seamlessly maintaining speed on the floor surface. The noise and vibration levels typically seen with belt drive burnisher systems are not a factor with this direct drive system.
™
Quick release 50’ safety yellow power cord
Adjustable handle with safety lock switch
Tusk™ T20 Burnisher
Dual capacitor “start/run” induction motorPolished aluminum and chrome all metal construction
Tundra Equipment Company Inc.
PO Box 1464, Summit, NJ 07902O: 1.800.482.5698 F: 908.665.0696 info@tundraec.com www.tundraec.com
™
Application Matrix
T20 Super Heavy x x x
Dry Bu
ffing
Wet
Strip
ping
Spray
Buffin
gDiam
ond P
olish
ingCa
rpet S
hampo
oing
Ston
e Poli
shing
Woo
d Floo
r San
ding
Ston
e Grin
ding
Mas
tic Re
moval
Superior Performance in a High Speed Burnisher
Simple to use — Improved operator efficiencyVersatile — Adaptable to a variety of cleaning tasksSafety — Operator safety and comfortReliable— Quality motor and components, durable constructionErgonomic — Improved productivity through better operation
Tusk – a Breed apart
The Tusk Burnisher pedigree is impressive. Every Tusk floor machine features a solid one piece cast base assembly and all metal construction with polished aluminum and chrome. Stainless steel handle assemblies with ergonomic handles are adjustable at operator hand height. Effortless trigger levers and convenient safety lock switch boost operator protection and comfort.
Specifications
T20 Burnisher 20” 1.5 66 open 120 @ 50/60HZ 1500 106 lbs 9 @ 120 ~
Note: T20 Burnisher features a rectified DC motor.
Pad S
izeM
otor H
PM
otor F
rame
Moto
r Coo
ling
Rated
Volta
ge
Pad S
peed
Total
Weig
ht
Amp Draw
T u s kT 2 0 D U A lF l o o r m a c h i n e
Two-speed versatility and Tusk™ heavy duty performance are the characteristics that help the T20 Dual floor machine stand out in a crowd. Developed by Tundra™ Equipment Company, the T20 Dual provides the versatility to tackle any floor surface with a single machine.
Switch from 180 rpm speed for standard cleaning to 320 rpm speed when more aggressive power is required — with a flip of a switch on the machine motor. The T20 Dual machine features a 1.5 HP, 66 frame DC rectified motor, and triple planet gearbox that will give your floor machine a longer service life.
You don’t have to choose between power and versatility. You get them both in a single machine with Tusk T20 Dual.
™™
Quick release 50’ safety yellow power cord
Adjustable handle with safety lock switch
Tusk™ Dual Series F l o o r M a c h i n e S
Dual capacitor “start/run” induction motorPolished aluminum and chrome all metal construction
Tundra Equipment Company Inc.
PO Box 1464, Summit, NJ 07902O: 1.800.482.5698 F: 908.665.0696 info@tundraec.com www.tundraec.com
™
Tusk – a Breed apart
The Tusk pedigree is impressive. Every Tusk floor machine features a solid one piece cast base assembly and all metal construction with polished aluminum and chrome. Stainless steel handle assemblies with ergonomic handles are adjustable at operator hand height. Effortless trigger levers and convenient safety lock switch boost operator protection and comfort.
Solution Tank Sure-Lok
Accessories
Application Matrix
T20 Dual x x x x x
Dry Bu
ffing
Wet
Strip
ping
Spray
Buffin
gDiam
ond P
olish
ingCa
rpet S
hampo
oing
Ston
e Poli
shing
Woo
d Floo
r San
ding
Ston
e Grin
ding
Mas
tic Re
moval
Pad S
izeM
otor H
PM
otor F
rame
Moto
r Coo
ling
Rated
Volta
ge
Pad S
peed
Clutch
Plate
Gearbo
x
Total
Weig
htAmp D
rawSpecifications
T20 Dual 20” 1.5 66 TEFC 120 @ 50/60HZ 180/320 NP 92 3-planet 106 lbs 14.2 @ 120~
Note: T20 Dual features a rectified DC motor.
A u r o r AA i r M o v e r Tundra has developed the Aurora™ Air Mover — a 3-speed air mover that directs concentrated air flow to quickly dry surfaces and ventilate closed in areas. Aurora is ideal for drying carpets, hard wood floors, upholstery and paint.
Aurora has been designed with the operator in mind. Convenience features include a telescoping handing, non mar transport wheels, and rubber feet to prevent floor “walk-around”. The power cord is integrated into the carry handle, a kickstand is included for wax drying, and up to 3 units can be stacked for even more powerful, concentrated air flow. ™
™
Tundra Equipment Company Inc.
PO Box 1464, Summit, NJ 07902O: 1.800.482.5698 F: 908.665.0696 info@tundraec.com www.tundraec.com
™
25’ safety yellow cable.Telescoping Handle Safety screen protects 1.2 HP ball bearing motor from objects entering the fan chamber
aurora a i r M o v e r