Post on 18-Jan-2015
description
CENTRIFUGAL OIL CLEANER FOR Hydraulic Oil
Oilmax
1
2
Why Hydraulic Oil Cleaning Is Required
Hydraulic oil needs frequent replacement due to Contamination generated within the system like Wear Particle & Oxidation Products.
There is also ingress of dust particles through breathers provided onHydraulic tanks.
Contaminated oil causes Wear & Tear of high precision hydraulic Components like hydraulic Pumps, Cylinders, Oil seal, etc.
Clean hydraulic oil extends life of hydraulic components, preventsMachine breakdown & improves productivity.
3
Specially developed
Inverted Rotor Design
Autowin has specially developed inverted rotor which has nozzles on the top of the rotor. In normal centrifugal oil cleaner, nozzles are at the bottom of rotor hence when the machine is Stopped the Contamination collected in the rotor flows out through Nozzles.
In the inverted rotor design the Contamination remains in therotor till the rotor is taken out for the cleaning
Pressurized Delivery
Autowin Centrifugal Oil Cleaning system has pressurized deliveryfacility. Suction & Delivery hoses of ¾ inch diameter which makes it convenient to connect the system to hydraulic tanks/ power packs.
The normal gravity drain machine has a drain hose of 2 inch Diameter hence Hydraulic oil needs to be removed from power pack in an open barrel for cleaning & it has to be refilled into hydro power pack after cleaning
4
Inverted Rotor Design Normal Rotor Design
Nozzles at top of the rotor
Nozzles at Bottom of the rotor
5
Installation On Hydraulic Oil Tank
Installation On Hydraulic Oil Tank(Pressurized Delivery)
Schematic Diagram
Autowin Centrifugal Oil Cleaning System