Prelim Revision PHOTO HERE

Category 1

Hand tools

£100 £100 £100£100£100

£200 £200 £200£200£200

£300 £300£300£300£300

£400 £400£400£400£400

£500 £500£500£500£500

Category 2 Power Tools

Category 3 Processes

Category 4 Materials

Category 5 Design Factors

Question

Category 1

For £100

With the following tool, you must:

Name it

Describe what is does

What type of material it is used on

Answer

Back toGame

Ball Pein hammer!

Category 1

For £200

Question What is the name of the tool you use to cut out detail in wood?

Answer

Back toGame

The Coping Saw!!

Question

Category 1

For £300

Name the three different types of chisel’s you can use.

Answer

Back toGame

MORTISE chisel

FIRMER chisel

BEVEL EDGED chisel

Question

Category 1

For £400

When preparing for the wood work lathe, what is the name of the tool you use to take the edges of the wood?

Answer

Back toGame

Smoothing or Jack plane

Question

Category 1

For £500

Name one wood turning tool

Answer

Back toGame

Gouge

Parting tool

Question

Category 2 For £100

Name the following power tool:

Answer

Back toGame

The Jigsaw!

Question

Category 2

For £200

Name three safety aspects you must consider when using any power tool

Answer

Back toGame

Google's

Guard down

Fingers away from blade

No loose clothing

Question

Category 2

For £300

There are three types of drill’s you can use, can you name at elast two of them?

Answer

Back toGame

Pillar drill

Cordless drill

Bench drill

Question

Name the power tool that you use to produce detail on

wood

Category 2

For £400

Answer

Back toGame

The router!!

QuestionName the power tools:

Category 2

For £500

Answer

Back toGame

Planer and fret saw!!!

QuestionWhen joining metals, name a

permanent and non permanent joint

Category 3

For £100

Answer

Back toGame

Welding, Soldering

Nut and bolt, riveting

QuestionName at least two processes

for plastics

Category 3

For £200

Answer

Back toGame

Blow moulding, die casting, injection moulding, Extrusion, vacuum forming, compression

QuestionDescribe how to use the strip heater

Category 3

For £300

Answer

Back toGame

Cut plastic, clean plastic and finish edges.

Heat up strip heater, place plastic on strips

QuestionName a joining process for wood and

plastic

Category 3

For £400

Answer

Back toGame

Wood – joints, glue, pins

Plastics – Tensile cement

QuestionName the two parts that are put together in the casting process which houses the

pattern.

Category 3

For £500

Answer

Back toGame

Cope and drag

QuestionName a softwood and

a hard wood

Category 4

For £100

Answer

Back toGame

Pine, spruce, parana pine, scots pine

Oak, beech, maple, teak,

Question

Name a ferrous and non ferrous metal

and state the difference between

them.

Category 4

For £200

Answer

Back toGame

Ferrous – mild steel, cast iron, cast steel

Non ferrous – copper, stainless steel, aluminium

Difference – Ferrous contains iron and rusts

QuestionWhat are the two different types of plastics and the

difference?

Category 4

For £300

Answer

Back toGame

Thermo and thermosetting plastic

Thermo plastic – can heat and reshape a number of times

Thermo setting only reshape it once

QuestionWhat is an Alloy?

Category 4

For £400

Answer

Back toGame

Produced when either ferrous or non ferrous metals are combined with one or more elements.

Question

Category 4

For £500

Name Two thermo setting plastics and Two thermo

plastics.

Answer

Back toGame

Thermo plastic - Low density polythene

Acrylic

Nylon

Thermo setting - Epoxy Resin

Polyester Resin

Melamine formaldehyde

QuestionName the stage in the design

process that will allow you to test your product before producing it

Category 5

For £100

Answer

Back toGame

modelling

Question

When writing your evaluation, what stage

do you collaborate with?

Category 5

For £200

Answer

Back toGame

Specification

QuestionDescribe what the analysis allows

you to do

Category 5

For £300

Answer

Back toGame

Brainstorms your ideas for what the model could be made from, looks like etc

Question

Name three stages of research

Category 5 For £400

Answer

Back toGame

AestheticsMaterialsManufactureFunctionCost (economics)EnvironmentErgonomics and AnthropometricsExisting Products on the market

Question

Category 5

For £500

Analysis

Specification

Research and Investigation

Ideas

Development ofIdeas

Modelling

Solution

. Planning for Manufacture

Manufacture

Evaluation

Brief

Put the following titles in order for

the design process

Answer

Back toGame

2. Analysis

3. Specification

4. Research and Investigation

5. Ideas

6. Development ofIdeas

7. Modelling

8. Solution

9. Planning for Manufacture

10. Manufacture

11. Evaluation 1. Brief

Congratulations you have completed!!

Good luck with the exams!!