Post on 07-Aug-2018
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 1/113
Std Thrd
1.275 in 0.112 in 1.00 in 32.25 in 28.25 in 4.00 in 9 lbs
32.38 mm 2.84 mm 25.40 mm 819 mm 717 mm 102 mm 4 kg
* Alternate th
available
2.063 in 1.750 in n/a 41.00 in 27.02 in 6.99 in 13 lbs
52.39 mm 44.45 mm n/a 1041 mm 686 mm 178 mm 6 kg
US n/a n/a n/a n/a
STD 1.037 in 26.34 mm 0.014 in 0.35 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
206‐45‐102.1/16" 4:5 Lobe 1.0 Stage
145 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
20 ‐ 50 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 218 psi
1000 k76 ‐ 189 lpm
61 ft‐lbs 82 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
6.41 rev/gal 1.7 rev/l
129 ‐ 321 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
1500 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
¾" UNC
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
28 psi 189 kpaZero Load Pressure 91 ft‐lbs 123 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
50 gpm (189 lpm)
35 gpm (132 lpm)
20 gpm (76 lpm)
0
20
40
60
80
100
0
50
100
150
200
250
300
0 50 100 150 200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.2
0.4
0.6
0.8
1.0
0.000
0.010
0.020
0.030
0.040
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 2/113
Std Thrd
1.275 in 0.112 in 1.00 in 32.25 in 28.25 in 4.00 in 9 lbs
32.38 mm 2.84 mm 25.40 mm 819 mm 717 mm 102 mm 4 kg
* Alternate th
available
2.063 in 1.750 in n/a 70.00 in 56.02 in 6.99 in 22 lbs
52.39 mm 44.45 mm n/a 1778 mm 1423 mm 178 mm 10 kg
US n/a n/a n/a n/a
STD 1.037 in 26.34 mm 0.014 in 0.35 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
206‐45‐202.1/16" 4:5 Lobe 2.0 Stage
315 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
20 ‐ 50 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 473 psi
2172 k76 ‐ 189 lpm
147 ft‐lbs 199 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
6.2 rev/gal 1.64 rev/l
124 ‐ 310 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3258 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
¾" UNC
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
57 psi 389 kpaZero Load Pressure 220 ft‐lbs 298 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
50 gpm (189 lpm)
35 gpm (132 lpm)
20 gpm (76 lpm)
0
50
100
150
200
250
0
50
100
150
200
250
300
0 50 100 150 200 250 300 350 400 450 500
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.2
0.4
0.6
0.8
1.0
0.000
0.010
0.020
0.030
0.040
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 3/113
Std Thrd
1.268 in 0.121 in 1.00 in 83.00 in 79.00 in 4.00 in 20 lbs
32.22 mm 3.08 mm 25.40 mm 2108 mm 2006 mm 102 mm 10 kg
* Alternate th
available
2.375 in 1.875 in n/a 90.00 in 76.00 in 7.00 in 49 lbs
60.33 mm 47.63 mm n/a 2286 mm 1930 mm 178 mm 22 kg
US n/a n/a n/a n/a
STD 1.015 in 25.78 mm 0.011 in 0.29 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
238‐23‐402.3/8" 2:3 Lobe 4.0 Stage
570 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
20 ‐ 65 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 855 psi
3931 k76 ‐ 246 lpm
102 ft‐lbs 138 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
13.75 rev/gal 3.64 rev/l
275 ‐ 894 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5896.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
¾" UNC
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
19 psi 127 kpaZero Load Pressure 153 ft‐lbs 207 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
65 gpm (246 lpm)
45 gpm (170 lpm)
20 gpm (76 lpm)
0
20
40
60
80
100
120
140
160
0
100
200
300
400
500
600
700
800
900
0 100 200 300 400 500 600 700 800 900
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 4/113
Std Thrd
1.284 in 0.116 in 1.00 in 52.25 in 48.25 in 4.00 in 14 lbs
32.61 mm 2.94 mm 25.40 mm 1327 mm 1225 mm 102 mm 7 kg
* Alternate th
available
2.375 in 1.875 in n/a 60.00 in 46.00 in 7.00 in 33 lbs
60.33 mm 47.63 mm n/a 1524 mm 1168 mm 178 mm 15 kg
US n/a n/a n/a n/a
STD 1.035 in 26.29 mm 0.018 in 0.45 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
238‐45‐302.3/8" 4:5 Lobe 3.0 Stage
405 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
10 ‐ 25 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 608 psi
2793 k38 ‐ 95 lpm
102 ft‐lbs 138 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
10.72 rev/gal 2.84 rev/l
108 ‐ 268 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4189.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
¾" UNC
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
27 psi 182 kpaZero Load Pressure 152 ft‐lbs 206 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
25 gpm (95 lpm)
20 gpm (76 lpm)
10 gpm (38 lpm)
0
20
40
60
80
100
120
140
160
0
50
100
150
200
250
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.2
0.4
0.6
0.8
1.0
0.000
0.010
0.020
0.030
0.040
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 5/113
Std Thrd
1.328 in 0.095 in 1.00 in 52.25 in 48.25 in 4.00 in 16 lbs
33.73 mm 2.42 mm 25.40 mm 1327 mm 1225 mm 102 mm 8 kg
* Alternate th
available
2.375 in 1.875 in n/a 60.00 in 46.00 in 7.00 in 33 lbs
60.33 mm 47.63 mm n/a 1524 mm 1168 mm 178 mm 15 kg
US n/a n/a n/a n/a
STD 1.134 in 28.80 mm 0.004 in 0.09 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
238‐56‐252.3/8" 5:6 Lobe 2.5 Stage
360 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
20 ‐ 50 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 540 psi
2483 k76 ‐ 189 lpm
122 ft‐lbs 165 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
7.69 rev/gal 2.04 rev/l
154 ‐ 385 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3724.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
¾" UNC
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
42 psi 286 kpaZero Load Pressure 183 ft‐lbs 248 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
50 gpm (189 lpm)
35 gpm (132 lpm)
20
gpm
(76
lpm)
0
50
100
150
200
0
50
100
150
200
250
300
350
400
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.2
0.4
0.6
0.8
1.0
0.000
0.010
0.020
0.030
0.040
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 6/113
Std Thrd
1.749 in 0.150 in 1.50 in 91.00 in 87.00 in 4.00 in 44 lbs
44.43 mm 3.82 mm 38.10 mm 2311 mm 2209 mm 102 mm 20 kg
* Alternate th
available
2.875 in 2.438 in n/a 96.75 in 86.75 in 5.00 in 57 lbs
73.03 mm 61.91 mm n/a 2457 mm 2203 mm 127 mm 26 kg
US n/a n/a n/a n/a
STD 1.447 in 36.75 mm 0.002 in 0.05 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
287‐23‐702.7/8" 2:3 Lobe 7.0 Stage
995 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
40 ‐ 70 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1493 psi
6861 k151 ‐ 265 lpm
284 ft‐lbs 385 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
11.23 rev/gal 2.97 rev/l
450 ‐ 787 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10291.5
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅛" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
74 psi 509 kpaZero Load Pressure 426 ft‐lbs 577 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
70 gpm (265 lpm)
55 gpm (208 lpm)
40 gpm (151 lpm)
0
50
100
150
200
250
300
350
400
450
0
100
200
300
400
500
600
700
800
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 7/113
Std Thrd
1.682 in 0.186 in 1.50 in 55.00 in 51.00 in 4.00 in 23 lbs
42.73 mm 4.73 mm 38.10 mm 1397 mm 1295 mm 102 mm 11 kg
* Alternate th
available
2.875 in 2.438 in n/a 60.00 in 50.00 in 5.00 in 36 lbs
73.03 mm 61.91 mm n/a 1524 mm 1270 mm 127 mm 17 kg
US n/a n/a n/a n/a
STD 1.297 in 32.94 mm 0.013 in 0.33 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
287‐34‐402.7/8" 3:4 Lobe 4.0 Stage
575 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
10 ‐ 40 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 863 psi
3965 k38 ‐ 151 lpm
184 ft‐lbs 249 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
9.18 rev/gal 2.43 rev/l
92 ‐ 367 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5947.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅛" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
17 psi 116 kpaZero Load Pressure 276 ft‐lbs 374 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
40 gpm (151 lpm)
25 gpm (95 lpm)
10 gpm (38 lpm)
0
50
100
150
200
250
300
0
50
100
150
200
250
300
350
400
0 100 200 300 400 500 600 700 800 900
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.2
0.4
0.6
0.8
1.0
0.000
0.010
0.020
0.030
0.040
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 8/113
Std Thrd
1.655 in 0.119 in 1.50 in 55.00 in 51.00 in 4.00 in 27 lbs
42.04 mm 3.03 mm 38.10 mm 1397 mm 1295 mm 102 mm 12 kg
* Alternate th
available
2.875 in 2.438 in n/a 60.00 in 50.00 in 5.00 in 36 lbs
73.03 mm 61.91 mm n/a 1524 mm 1270 mm 127 mm 17 kg
US n/a n/a n/a n/a
STD 1.417 in 35.99 mm ‐0.001 in ‐0.02 mm
OS n/a n/a n/a n/a
2OS 1.443 in 36.65 mm ‐0.027 in ‐0.68 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
287‐56‐332.7/8" 5:6 Lobe 3.3 Stage
460 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
20 ‐ 80 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 690 psi
3172 k76 ‐ 303 lpm
205 ft‐lbs 278 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
5.79 rev/gal 1.53 rev/l
116 ‐ 463 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4758 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅛" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
33 psi 223 kpaZero Load Pressure 308 ft‐lbs 417 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
80 gpm (303 lpm)
50 gpm (189 lpm)
20 gpm (76 lpm)
0
50
100
150
200
250
300
0
50
100
150
200
250
300
350
400
450
500
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 9/113
Std Thrd
1.655 in 0.119 in 1.50 in 110.13 in 106.13 in 4.00 in 51 lbs
42.04 mm 3.03 mm 38.10 mm 2797 mm 2695 mm 102 mm 23 kg
* Alternate th
available
2.875 in 2.438 in n/a 117.00 in 107.00 in 5.00 in 69 lbs
73.03 mm 61.91 mm n/a 2972 mm 2718 mm 127 mm 32 kg
US n/a n/a n/a n/a
STD 1.415 in 35.94 mm 0.001 in 0.04 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
287‐56‐702.7/8" 5:6 Lobe 7.0 Stage
1020 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
20 ‐ 80 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1530 psi
7033 k76 ‐ 303 lpm
516 ft‐lbs 699 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
5.28 rev/gal 1.4 rev/l
106 ‐ 422 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10549.5
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅛" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
83 psi 572 kpaZero Load Pressure 773 ft‐lbs 1048 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
80 gpm (303 lpm)
50 gpm (189 lpm)
20 gpm (76 lpm)
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
400
450
0 200 400 600 800 1000 1200 1400 1600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 10/113
Std Thrd
1.845 in 0.109 in 1.50 in 48.00 in 44.00 in 4.00 in 30 lbs
46.87 mm 2.77 mm 38.10 mm 1219 mm 1117 mm 102 mm 14 kg
* Alternate th
available
2.875 in 2.438 in 3.130 in 52.00 in 42.00 in 5.00 in 31 lbs
73.03 mm 61.91 mm 79.50 mm 1321 mm 1067 mm 127 mm 14 kg
US n/a n/a n/a n/a
STD 1.628 in 41.35 mm ‐0.001 in ‐0.03 mm
OS 1.644 in 41.76 mm ‐0.017 in ‐0.44 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
287‐78‐252.7/8" 7:8 Lobe 2.5 Stage
370 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
25 ‐ 70 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 555 psi
2552 k95 ‐ 265 lpm
251 ft‐lbs 340 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
3.64 rev/gal 0.97 rev/l
91 ‐ 255 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3828 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅛" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
40 psi 273 kpaZero Load Pressure 376 ft‐lbs 509 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
70 gpm (265 lpm)
50 gpm (189 lpm)
25 gpm (95 lpm)
0
50
100
150
200
250
300
350
400
0
50
100
150
200
250
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full
Load
PowerPLUS™
Full
Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 11/113
Std Thrd
1.845 in 0.109 in 1.50 in 70.00 in 66.00 in 4.00 in 43 lbs
46.87 mm 2.77 mm 38.10 mm 1778 mm 1676 mm 102 mm 20 kg
* Alternate th
available
2.875 in 2.438 in 3.130 in 74.00 in 64.00 in 5.00 in 44 lbs
73.03 mm 61.91 mm 79.50 mm 1880 mm 1626 mm 127 mm 20 kg
US n/a n/a n/a n/a
STD 1.628 in 41.35 mm ‐0.001 in ‐0.03 mm
OS 1.644 in 41.76 mm ‐0.017 in ‐0.44 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
287‐78‐402.7/8" 7:8 Lobe 4.0 Stage
590 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
70 ‐ 110 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 885 psi
4068 k265 ‐ 416 lpm
392 ft‐lbs 532 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
3.69 rev/gal 0.98 rev/l
258 ‐ 406 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
6102 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅛" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
140 psi 959 kpaZero Load Pressure 588 ft‐lbs 797 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
110 gpm (416 lpm)
90 gpm (341 lpm)
70 gpm (265 lpm)
0
100
200
300
400
500
600
0
50
100
150
200
250
300
350
400
0 100 200 300 400 500 600 700 800 900
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 12/113
Std Thrd
1.845 in 0.109 in 1.50 in 48.00 in 44.00 in 4.00 in 30 lbs
46.87 mm 2.77 mm 38.10 mm 1219 mm 1117 mm 102 mm 14 kg
* Alternate th
available
3.125 in 2.438 in 2.880 in 52.00 in 42.00 in 5.00 in 51 lbs
79.38 mm 61.91 mm 73.15 mm 1321 mm 1067 mm 127 mm 23 kg
US n/a n/a n/a n/a
STD 1.628 in 41.35 mm ‐0.001 in ‐0.03 mm
OS 1.644 in 41.76 mm ‐0.017 in ‐0.44 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
312‐78‐253.1/8" 7:8 Lobe 2.5 Stage
370 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
25 ‐ 70 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 555 psi
2552 k95 ‐ 265 lpm
251 ft‐lbs 340 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
3.64 rev/gal 0.97 rev/l
91 ‐ 255 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3828 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅛" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
40 psi 273 kpaZero Load Pressure 376 ft‐lbs 509 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
70 gpm (265 lpm)
50 gpm (189 lpm)
25 gpm (95 lpm)
0
50
100
150
200
250
300
350
400
0
50
100
150
200
250
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full
LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 13/113
Std Thrd
1.971 in 0.109 in 1.75 in 101.00 in 97.00 in 4.00 in 71 lbs
50.08 mm 2.76 mm 44.45 mm 2565 mm 2463 mm 102 mm 33 kg
* Alternate th
available
3.125 in 2.625 in n/a 106.00 in 96.00 in 5.00 in 78 lbs
79.38 mm 66.67 mm n/a 2692 mm 2438 mm 127 mm 35 kg
US n/a n/a n/a n/a
STD 1.757 in 44.63 mm ‐0.003 in ‐0.07 mm
OS 1.784 in 45.31 mm ‐0.030 in ‐0.75 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
312‐78‐303.1/8" 7:8 Lobe 3.0 Stage
460 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
80 ‐ 140 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 690 psi
3172 k303 ‐ 530 lpm
660 ft‐lbs 895 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.8 rev/gal 0.48 rev/l
144 ‐ 252 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4758 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
194 psi 1333 kpaZero Load Pressure 990 ft‐lbs 1342 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
140 gpm (530 lpm)
110 gpm (416 lpm)
80 gpm (303 lpm)
0
200
400
600
800
1000
0
50
100
150
200
250
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 14/113
Std Thrd
1.845 in 0.109 in 1.50 in 70.00 in 66.00 in 4.00 in 43 lbs
46.87 mm 2.77 mm 38.10 mm 1778 mm 1676 mm 102 mm 20 kg
* Alternate th
available
3.125 in 2.438 in 2.880 in 74.00 in 64.00 in 5.00 in 72 lbs
79.38 mm 61.91 mm 73.15 mm 1880 mm 1626 mm 127 mm 33 kg
US n/a n/a n/a n/a
STD 1.628 in 41.35 mm ‐0.001 in ‐0.03 mm
OS 1.644 in 41.76 mm ‐0.017 in ‐0.44 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
312‐78‐403.1/8" 7:8 Lobe 4.0 Stage
590 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
70 ‐ 110 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 885 psi
4068 k265 ‐ 416 lpm
392 ft‐lbs 532 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
3.69 rev/gal 0.98 rev/l
258 ‐ 406 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
6102 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅛" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
140 psi 959 kpaZero Load Pressure 588 ft‐lbs 797 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
110 gpm (416 lpm)
90 gpm (341 lpm)
70 gpm (265 lpm)
0
100
200
300
400
500
600
0
50
100
150
200
250
300
350
400
0 100 200 300 400 500 600 700 800 900
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 15/113
Std Thrd
1.938 in 0.163 in 1.75 in 111.00 in 107.00 in 4.00 in 66 lbs
49.23 mm 4.14 mm 44.45 mm 2819 mm 2717 mm 102 mm 30 kg
* Alternate th
available
3.375 in 2.750 in 3.500 in 124.00 in 112.00 in 6.00 in 121 lbs
85.73 mm 69.85 mm 88.90 mm 3150 mm 2845 mm 152 mm 55 kg
US n/a n/a n/a n/a
STD 1.600 in 40.64 mm 0.012 in 0.30 mm
OS n/a n/a n/a n/a
2OS 1.635 in 41.53 mm ‐0.023 in ‐0.59 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
338‐45‐503.3/8" 4:5 Lobe 5.0 Stage
750 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
60 ‐ 120 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1125 psi
5172 k227 ‐ 454 lpm
570 ft‐lbs 773 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
3.41 rev/gal 0.9 rev/l
205 ‐ 409 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7758 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
140 psi 966 kpaZero Load Pressure 855 ft‐lbs 1160 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
120 gpm (454 lpm)
90 gpm (341 lpm)
60 gpm (227 lpm)
0
100
200
300
400
500
600
700
800
900
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 16/113
Std Thrd
1.964 in 0.110 in 1.75 in 111.00 in 107.00 in 4.00 in 77 lbs
49.89 mm 2.79 mm 44.45 mm 2819 mm 2717 mm 102 mm 35 kg
* Alternate th
available
3.375 in 2.750 in 3.500 in 124.00 in 112.00 in 6.00 in 121 lbs
85.73 mm 69.85 mm 88.90 mm 3150 mm 2845 mm 152 mm 55 kg
US n/a n/a n/a n/a
STD 1.728 in 43.89 mm 0.017 in 0.42 mm
OS n/a n/a n/a n/a
2OS 1.769 in 44.93 mm ‐0.024 in ‐0.62 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
338‐78‐303.3/8" 7:8 Lobe 3.0 Stage
460 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
60 ‐ 120 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 690 psi
3172 k227 ‐ 454 lpm
782 ft‐lbs 1061 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.57 rev/gal 0.42 rev/l
94 ‐ 188 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4758 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
120 psi 826 kpaZero Load Pressure 1173 ft‐lbs 1591 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
120 gpm (454 lpm)
90 gpm (341 lpm)
60 gpm (227 lpm)
0
200
400
600
800
1000
1200
0
20
40
60
80
100
120
140
160
180
200
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 17/113
Std Thrd
2.160 in 0.100 in 1.88 in 55.25 in 51.00 in 4.25 in 50 lbs
54.86 mm 2.54 mm 47.63 mm 1403 mm 1295 mm 108 mm 23 kg
* Alternate th
available
3.375 in 2.750 in 3.500 in 61.50 in 49.50 in 6.00 in 60 lbs
85.73 mm 69.85 mm 88.90 mm 1562 mm 1257 mm 152 mm 28 kg
US n/a n/a n/a n/a
STD 1.963 in 49.86 mm ‐0.003 in ‐0.09 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
338‐910‐303.3/8" 9:10 Lobe 3.0 Stage
485 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
60 ‐ 120 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 728 psi
3344 k227 ‐ 454 lpm
319 ft‐lbs 433 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
2.79 rev/gal 0.74 rev/l
168 ‐ 335 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5016 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
154 psi 1056 kpaZero Load Pressure 478 ft‐lbs 649 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
120 gpm (454 lpm)
90 gpm (341 lpm)
60 gpm (227 lpm)
0
100
200
300
400
500
0
50
100
150
200
250
300
350
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 18/113
Std Thrd
2.159 in 0.182 in 1.75 in 129.00 in 124.00 in 5.00 in 95 lbs
54.85 mm 4.63 mm 44.45 mm 3277 mm 3150 mm 127 mm 43 kg
* Alternate th
available
3.625 in 3.000 in 3.750 in 141.00 in 129.00 in 6.00 in 148 lbs
92.08 mm 76.20 mm 95.25 mm 3581 mm 3276 mm 152 mm 68 kg
US n/a n/a n/a n/a
STD 1.785 in 45.34 mm 0.010 in 0.24 mm
OS 1.798 in 45.67 mm ‐0.003 in ‐0.09 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
358‐45‐353.5/8" 4:5 Lobe 3.5 Stage
520 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
80 ‐ 160 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 780 psi
3586 k303 ‐ 606 lpm
918 ft‐lbs 1245 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.57 rev/gal 0.42 rev/l
125 ‐ 250 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5379 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
75 psi 512 kpaZero Load Pressure 1377 ft‐lbs 1867 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
160 gpm (606 lpm)
120 gpm (454 lpm)
80 gpm (303 lpm)
0
200
400
600
800
1000
1200
1400
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.2
0.4
0.6
0.8
1.0
0.000
0.010
0.020
0.030
0.040
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 19/113
Std Thrd
2.198 in 0.155 in 2.00 in 174.00 in 169.00 in 5.00 in 140 lbs
55.84 mm 3.95 mm 50.80 mm 4420 mm 4293 mm 127 mm 64 kg
* Alternate th
available
3.625 in 3.000 in 3.750 in 180.00 in 168.00 in 6.00 in 189 lbs
92.08 mm 76.20 mm 95.25 mm 4572 mm 4267 mm 152 mm 86 kg
US n/a n/a n/a n/a
STD n/a n/a n/a n/a
OS 1.902 in 48.31 mm ‐0.014 in ‐0.37 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
358‐56‐503.5/8" 5:6 Lobe 5.0 Stage
725 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 160 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1088 psi
4999 k379 ‐ 606 lpm
1055 ft‐lbs 1431 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.52 rev/gal 0.4 rev/l
152 ‐ 243 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7498.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
103 psi 706 kpaZero Load Pressure 1583 ft‐lbs 2146 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
160 gpm (606 lpm)
130 gpm (492 lpm)
100 gpm (379 lpm)
0
200
400
600
800
1000
1200
1400
1600
0
50
100
150
200
250
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 20/113
Std Thrd
2.252 in 0.127 in 1.88 in 129.00 in 124.00 in 5.00 in 117 lbs
57.19 mm 3.22 mm 47.63 mm 3277 mm 3150 mm 127 mm 53 kg
* Alternate th
available
3.625 in 3.000 in 3.750 in 141.00 in 129.00 in 6.00 in 148 lbs
92.08 mm 76.20 mm 95.25 mm 3581 mm 3276 mm 152 mm 68 kg
US n/a n/a n/a n/a
STD 1.986 in 50.45 mm 0.012 in 0.30 mm
OS 2.001 in 50.83 mm ‐0.003 in ‐0.08 mm
2OS 2.023 in 51.38 mm ‐0.025 in ‐0.63 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
358‐78‐233.5/8" 7:8 Lobe 2.3 Stage
350 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 160 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 525 psi
2414 k379 ‐ 606 lpm
1124 ft‐lbs 1524 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.77 rev/gal 0.21 rev/l
77 ‐ 122 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3621 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
145 psi 999 kpaZero Load Pressure 1686 ft‐lbs 2286 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
160 gpm (606 lpm)
130 gpm (492 lpm)
100 gpm (379 lpm)
0
200
400
600
800
1000
1200
1400
1600
1800
0
20
40
60
80
100
120
0 100 200 300 400 500
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 21/113
Std Thrd
2.063 in 0.270 in 2.09 in 126.44 in 123.13 in 3.31 in 93 lbs
52.41 mm 6.85 mm 53.00 mm 3212 mm 3128 mm 84 mm 42 kg
* Alternate th
available
3.750 in 3.000 in n/a 129.50 in 117.50 in 6.00 in 166 lbs
95.25 mm 76.20 mm n/a 3289 mm 2984 mm 152 mm 76 kg
US n/a n/a n/a n/a
STD 1.492 in 37.90 mm 0.301 in 7.66 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
375‐12‐503.3/4" 1:2 Lobe 5.0 Stage
615 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
80 ‐ 110 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 923 psi
4241 k303 ‐ 416 lpm
373 ft‐lbs 505 nmStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
6.73 rev/gal 1.78 rev/l
539 ‐ 741 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
6361.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
#N/A
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
0 psi 0 kpaZero Load Pressure 559 ft‐lbs 757 nmPowerPLUS™ Torque @ Max Pressure
Overall Contour
110 gpm (416 lpm)
95 gpm (360 lpm)
80 gpm (303 lpm)
0
100
200
300
400
500
600
0
100
200
300
400
500
600
700
800
0 100 200 300 400 500 600 700 800 900 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 22/113
Std Thrd
2.159 in 0.182 in 1.75 in 129.00 in 124.00 in 5.00 in 95 lbs
54.85 mm 4.63 mm 44.45 mm 3277 mm 3150 mm 127 mm 43 kg
* Alternate th
available
3.750 in 3.000 in 3.630 in 141.00 in 129.00 in 6.00 in 181 lbs
95.25 mm 76.20 mm 92.20 mm 3581 mm 3276 mm 152 mm 82 kg
US n/a n/a n/a n/a
STD 1.785 in 45.34 mm 0.010 in 0.24 mm
OS 1.798 in 45.67 mm ‐0.003 in ‐0.09 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
375‐45‐353.3/4" 4:5 Lobe 3.5 Stage
520 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
80 ‐ 160 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 780 psi
3586 k303 ‐ 606 lpm
918 ft‐lbs 1245 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.57 rev/gal 0.42 rev/l
125 ‐ 250 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5379 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
75 psi 512 kpaZero Load Pressure 1377 ft‐lbs 1867 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
160 gpm (606 lpm)
120 gpm (454 lpm)
80 gpm (303 lpm)
0
200
400
600
800
1000
1200
1400
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.2
0.4
0.6
0.8
1.0
0.000
0.010
0.020
0.030
0.040
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 23/113
Std Thrd
2.198 in 0.155 in 2.00 in 176.00 in 171.00 in 5.00 in 142 lbs
55.84 mm 3.95 mm 50.80 mm 4470 mm 4343 mm 127 mm 65 kg
* Alternate th
available
3.750 in 3.000 in 3.630 in 180.00 in 168.00 in 6.00 in 231 lbs
95.25 mm 76.20 mm 92.20 mm 4572 mm 4267 mm 152 mm 105 kg
US n/a n/a n/a n/a
STD n/a n/a n/a n/a
OS 1.902 in 48.31 mm ‐0.014 in ‐0.37 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
375‐56‐503.3/4" 5:6 Lobe 5.0 Stage
725 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 160 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1088 psi
4999 k379 ‐ 606 lpm
1055 ft‐lbs 1431 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.52 rev/gal 0.4 rev/l
152 ‐ 243 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7498.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
103 psi 706 kpaZero Load Pressure 1583 ft‐lbs 2146 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
160 gpm (606 lpm)
130 gpm (492 lpm)
100 gpm (379 lpm)
0
200
400
600
800
1000
1200
1400
1600
0
50
100
150
200
250
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 24/113
Std Thrd
2.243 in 0.156 in 2.00 in 156.00 in 151.00 in 5.00 in 132 lbs
56.97 mm 3.95 mm 50.80 mm 3962 mm 3835 mm 127 mm 60 kg
* Alternate th
available
3.750 in 3.000 in 3.880 in 160.00 in 148.00 in 6.00 in 206 lbs
95.25 mm 76.20 mm 98.55 mm 4064 mm 3759 mm 152 mm 94 kg
US n/a n/a n/a n/a
STD 1.922 in 48.82 mm 0.009 in 0.24 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
375‐67‐303.3/4" 6:7 Lobe 3.0 Stage
440 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
80 ‐ 200 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 660 psi
3034 k303 ‐ 757 lpm
1314 ft‐lbs 1782 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.8 rev/gal 0.22 rev/l
64 ‐ 160 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4551 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
106 psi 730 kpaZero Load Pressure 1971 ft‐lbs 2672 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
200 gpm (757 lpm)
140 gpm (530 lpm)
80 gpm (303 lpm)
0
500
1000
1500
2000
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 25/113
Std Thrd
2.237 in 0.125 in 2.00 in 156.00 in 151.00 in 5.00 in 140 lbs
56.83 mm 3.17 mm 50.80 mm 3962 mm 3835 mm 127 mm 64 kg
* Alternate th
available
3.750 in 3.000 in 3.880 in 160.00 in 148.00 in 6.00 in 206 lbs
95.25 mm 76.20 mm 98.55 mm 4064 mm 3759 mm 152 mm 94 kg
US n/a n/a n/a n/a
STD 1.980 in 50.29 mm 0.008 in 0.20 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
375‐78‐203.3/4" 7:8 Lobe 2.0 Stage
295 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 160 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 443 psi
2034 k379 ‐ 606 lpm
1312 ft‐lbs 1778 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.56 rev/gal 0.15 rev/l
56 ‐ 89 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3051 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
165 psi 1135 kpaZero Load Pressure 1967 ft‐lbs 2667 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
160 gpm (606 lpm)
130 gpm (492 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
0
10
20
30
40
50
60
70
80
90
100
0 50 100 150 200 250 300 350 400 450 500
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 26/113
Std Thrd
2.252 in 0.127 in 1.88 in 129.00 in 124.00 in 5.00 in 117 lbs
57.19 mm 3.22 mm 47.63 mm 3277 mm 3150 mm 127 mm 53 kg
* Alternate th
available
3.750 in 3.000 in 3.630 in 141.00 in 129.00 in 6.00 in 181 lbs
95.25 mm 76.20 mm 92.20 mm 3581 mm 3276 mm 152 mm 82 kg
US n/a n/a n/a n/a
STD 1.986 in 50.44 mm 0.012 in 0.31 mm
OS 2.001 in 50.83 mm ‐0.003 in ‐0.08 mm
2OS 2.023 in 51.38 mm ‐0.025 in ‐0.63 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
375‐78‐233.3/4" 7:8 Lobe 2.3 Stage
350 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 160 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 525 psi
2414 k379 ‐ 606 lpm
1124 ft‐lbs 1524 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.77 rev/gal 0.21 rev/l
77 ‐ 122 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3621 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
145 psi 999 kpaZero Load Pressure 1686 ft‐lbs 2286 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
160 gpm (606 lpm)
130 gpm (492 lpm)
100 gpm (379 lpm)
0
200
400
600
800
1000
1200
1400
1600
1800
0
20
40
60
80
100
120
0 100 200 300 400 500
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 27/113
Std Thrd
2.243 in 0.156 in 2.00 in 156.00 in 151.00 in 5.00 in 132 lbs
56.97 mm 3.95 mm 50.80 mm 3962 mm 3835 mm 127 mm 60 kg
* Alternate th
available
3.875 in 3.000 in 3.750 in 160.00 in 148.00 in 6.00 in 244 lbs
98.43 mm 76.20 mm 95.25 mm 4064 mm 3759 mm 152 mm 111 kg
US n/a n/a n/a n/a
STD 1.922 in 48.82 mm 0.009 in 0.24 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
387‐67‐303.7/8" 6:7 Lobe 3.0 Stage
440 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
80 ‐ 200 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 660 psi
3034 k303 ‐ 757 lpm
1314 ft‐lbs 1782 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.8 rev/gal 0.22 rev/l
64 ‐ 160 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4551 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
106 psi 730 kpaZero Load Pressure 1971 ft‐lbs 2672 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
200 gpm (757 lpm)
140 gpm (530 lpm)
80 gpm (303 lpm)
0
500
1000
1500
2000
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 28/113
Std Thrd
2.237 in 0.125 in 2.00 in 156.00 in 151.00 in 5.00 in 140 lbs
56.83 mm 3.17 mm 50.80 mm 3962 mm 3835 mm 127 mm 64 kg
* Alternate th
available
3.875 in 3.000 in 3.750 in 160.00 in 148.00 in 6.00 in 244 lbs
98.43 mm 76.20 mm 95.25 mm 4064 mm 3759 mm 152 mm 111 kg
US n/a n/a n/a n/a
STD 1.980 in 50.28 mm 0.008 in 0.20 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
387‐78‐203.7/8" 7:8 Lobe 2.0 Stage
295 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 160 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 443 psi
2034 k379 ‐ 606 lpm
1312 ft‐lbs 1778 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.56 rev/gal 0.15 rev/l
56 ‐ 89 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3051 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅜" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
165 psi 1135 kpaZero Load Pressure 1967 ft‐lbs 2667 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
160 gpm (606 lpm)
130 gpm (492 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
0
10
20
30
40
50
60
70
80
90
100
0 50 100 150 200 250 300 350 400 450 500
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 29/113
Std Thrd
2.738 in 0.241 in 2.75 in 243.00 in 237.00 in 6.00 in 281 lbs
69.55 mm 6.11 mm 69.85 mm 6172 mm 6020 mm 152 mm 128 kg
* Alternate t
available
4.750 in 3.750 in 5.000 in 255.00 in 239.00 in 8.00 in 549 lbs
120.65 mm 95.25 mm 127.00 mm 6477 mm 6071 mm 203 mm 249 kg
US n/a n/a n/a n/a
STD 2.272 in 57.71 mm ‐0.015 in ‐0.38 mm
OS 2.286 in 58.06 mm ‐0.029 in ‐0.73 mm
2OS 2.317 in 58.86 mm ‐0.060 in ‐1.54 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
475‐23‐804.3/4" 2:3 Lobe 8.0 Stage
1135 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 260 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1703 psi
7826 k379 ‐ 984 lpm
1428 ft‐lbs 1936 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.99 rev/gal 0.53 rev/l
199 ‐ 517 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
11739 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
80 psi 548 kpaZero Load Pressure 2142 ft‐lbs 2904 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
260 gpm (984 lpm)
180 gpm (681 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
0
100
200
300
400
500
0 200 400 600 800 1000 1200 1400 1600 1800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 30/113
Std Thrd
2.912 in 0.244 in 2.75 in 107.00 in 101.00 in 6.00 in 148 lbs
73.96 mm 6.21 mm 69.85 mm 2718 mm 2566 mm 152 mm 67 kg
* Alternate th
available
4.750 in 3.750 in 5.000 in 122.00 in 106.00 in 8.00 in 263 lbs
120.65 mm 95.25 mm 127.00 mm 3099 mm 2693 mm 203 mm 120 kg
US n/a n/a n/a n/a
STD 2.411 in 61.24 mm 0.012 in 0.30 mm
OS n/a n/a n/a n/a
2OS 2.447 in 62.15 mm ‐0.024 in ‐0.61 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
475‐45‐354.3/4" 4:5 Lobe 3.5 Stage
520 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 780 psi
3586 k379 ‐ 946 lpm
1218 ft‐lbs 1652 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.07 rev/gal 0.29 rev/l
107 ‐ 267 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5379 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅞" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
52 psi 353 kpaZero Load Pressure 1827 ft‐lbs 2477 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100
gpm
(379
lpm)
0
500
1000
1500
2000
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 31/113
Std Thrd
2.912 in 0.244 in 2.75 in 178.00 in 172.00 in 6.00 in 239 lbs
73.96 mm 6.21 mm 69.85 mm 4521 mm 4369 mm 152 mm 109 kg
* Alternate t
available
4.750 in 3.750 in n/a 187.00 in 171.00 in 8.00 in 403 lbs
120.65 mm 95.25 mm n/a 4750 mm 4344 mm 203 mm 183 kg
US n/a n/a n/a n/a
STD 2.422 in 61.52 mm 0.001 in 0.02 mm
OS n/a n/a n/a n/a
2OS 2.447 in 62.15 mm ‐0.024 in ‐0.61 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
475‐45‐604.3/4" 4:5 Lobe 6.0 Stage
840 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1260 psi
5792 k379 ‐ 946 lpm
2011 ft‐lbs 2727 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.02 rev/gal 0.27 rev/l
102 ‐ 254 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
8688 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
53 psi 365 kpaZero Load Pressure 3017 ft‐lbs 4090 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
0
50
100
150
200
250
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 32/113
Std Thrd
2.912 in 0.244 in 2.75 in 188.00 in 182.00 in 6.00 in 252 lbs
73.96 mm 6.21 mm 69.85 mm 4775 mm 4623 mm 152 mm 114 kg
* Alternate t
available
4.750 in 3.750 in 5.000 in 207.00 in 191.00 in 8.00 in 446 lbs
120.65 mm 95.25 mm 127.00 mm 5258 mm 4852 mm 203 mm 203 kg
US n/a n/a n/a n/a
STD 2.422 in 61.52 mm 0.001 in 0.02 mm
OS 2.435 in 61.84 mm ‐0.012 in ‐0.30 mm
2OS 2.447 in 62.15 mm ‐0.024 in ‐0.61 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
475‐45‐634.3/4" 4:5 Lobe 6.3 Stage
955 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1433 psi
6585 k379 ‐ 946 lpm
2287 ft‐lbs 3100 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.02 rev/gal 0.27 rev/l
102 ‐ 254 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
9877.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
53 psi 365 kpaZero Load Pressure 3430 ft‐lbs 4650 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
3500
0
50
100
150
200
250
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 33/113
Std Thrd
2.916 in 0.205 in 2.75 in 229.50 in 223.50 in 6.00 in 326 lbs
74.07 mm 5.21 mm 69.85 mm 5829 mm 5677 mm 152 mm 148 kg
* Alternate t
available
4.750 in 3.750 in n/a 242.63 in 226.63 in 8.00 in 523 lbs
120.65 mm 95.25 mm n/a 6163 mm 5757 mm 203 mm 237 kg
US n/a n/a n/a n/a
STD 2.495 in 63.37 mm 0.011 in 0.28 mm
OS n/a n/a n/a n/a
2OS 2.519 in 63.98 mm ‐0.013 in ‐0.33 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
475‐56‐834.3/4" 5:6 Lobe 8.3 Stage
1190 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
150 ‐ 300 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1785 psi
8205 k568 ‐ 1136
3208 ft‐lbs 4349 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.09 rev/gal 0.29 rev/l
164 ‐ 327 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
12307.5
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
276 psi 1901 kpaZero Load Pressure 4811 ft‐lbs 6523 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
300 gpm (1136 lpm)
225 gpm (852 lpm)
150 gpm (568 lpm)
0
1000
2000
3000
4000
5000
0
50
100
150
200
250
300
350
0 200 400 600 800 1000 1200 1400 1600 1800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 34/113
Std Thrd
2.798 in 0.163 in 2.82 in 172.50 in 166.50 in 6.00 in 242 lbs
71.08 mm 4.13 mm 71.75 mm 4382 mm 4230 mm 152 mm 110 kg
* Alternate t
available
4.750 in 3.750 in 5.000 in 180.00 in 164.00 in 8.00 in 388 lbs
120.65 mm 95.25 mm 127.00 mm 4572 mm 4166 mm 203 mm 176 kg
US n/a n/a n/a n/a
STD 2.476 in 62.89 mm ‐0.003 in ‐0.08 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
475‐78‐204.3/4" 7:8 Lobe 2.0 Stage
280 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 420 psi
1931 k379 ‐ 946 lpm
1806 ft‐lbs 2449 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.32 rev/gal 0.09 rev/l
32 ‐ 80 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
2896.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
75 psi 511 kpaZero Load Pressure 2709 ft‐lbs 3673 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
0
10
20
30
40
50
60
70
80
90
0 50 100 150 200 250 300 350 400 450
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 35/113
Std Thrd
2.936 in 0.164 in 2.75 in 107.00 in 101.00 in 6.00 in 170 lbs
74.58 mm 4.17 mm 69.85 mm 2718 mm 2566 mm 152 mm 77 kg
* Alternate t
available
4.750 in 3.750 in 5.000 in 122.00 in 106.00 in 8.00 in 263 lbs
120.65 mm 95.25 mm 127.00 mm 3099 mm 2693 mm 203 mm 120 kg
US n/a n/a n/a n/a
STD 2.592 in 65.84 mm 0.015 in 0.39 mm
OS n/a n/a n/a n/a
2OS 2.639 in 67.03 mm ‐0.031 in ‐0.80 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
475‐78‐224.3/4" 7:8 Lobe 2.2 Stage
335 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 503 psi
2310 k379 ‐ 946 lpm
1480 ft‐lbs 2006 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.55 rev/gal 0.15 rev/l
55 ‐ 137 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3465 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
70 psi 483 kpaZero Load Pressure 2220 ft‐lbs 3009 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
0
20
40
60
80
100
120
140
0 100 200 300 400 500
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.020
0.040
0.060
0.080
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 36/113
Std Thrd
2.798 in 0.163 in 3.00 in 242.00 in 236.50 in 5.50 in 335 lbs
71.08 mm 4.13 mm 76.20 mm 6147 mm 6007 mm 140 mm 152 kg
* Alternate t
available
4.750 in 3.750 in 5.000 in 250.00 in 234.00 in 8.00 in 538 lbs
120.65 mm 95.25 mm 127.00 mm 6350 mm 5944 mm 203 mm 244 kg
US n/a n/a n/a n/a
STD 2.470 in 62.74 mm 0.003 in 0.07 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
475‐78‐294.3/4" 7:8 Lobe 2.9 Stage
405 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 608 psi
2793 k379 ‐ 946 lpm
2792 ft‐lbs 3785 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.34 rev/gal 0.09 rev/l
34 ‐ 83 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4189.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
130 psi 896 kpaZero Load Pressure 4187 ft‐lbs 5677 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
3500
4000
4500
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 37/113
Std Thrd
2.936 in 0.164 in 2.75 in 178.00 in 172.00 in 6.00 in 275 lbs
74.58 mm 4.17 mm 69.85 mm 4521 mm 4369 mm 152 mm 125 kg
* Alternate th
available
4.750 in 3.750 in 5.000 in 187.00 in 171.00 in 8.00 in 403 lbs
120.65 mm 95.25 mm 127.00 mm 4750 mm 4344 mm 203 mm 183 kg
US n/a n/a n/a n/a
STD 2.609 in 66.27 mm ‐0.002 in ‐0.04 mm
OS 2.629 in 66.78 mm ‐0.022 in ‐0.55 mm
2OS 2.647 in 67.23 mm ‐0.039 in ‐1.00 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
475‐78‐384.3/4" 7:8 Lobe 3.8 Stage
535 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 803 psi
3689 k379 ‐ 946 lpm
2332 ft‐lbs 3162 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.53 rev/gal 0.14 rev/l
53 ‐ 131 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5533.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅞" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
85 psi 580 kpaZero Load Pressure 3498 ft‐lbs 4742 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
3500
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 38/113
Std Thrd
2.738 in 0.241 in 2.75 in 243.00 in 237.00 in 6.00 in 281 lbs
69.55 mm 6.11 mm 69.85 mm 6172 mm 6020 mm 152 mm 128 kg
* Alternate t
available
5.000 in 3.750 in 4.750 in 255.00 in 239.00 in 8.00 in 707 lbs
127.00 mm 95.25 mm 120.65 mm 6477 mm 6071 mm 203 mm 321 kg
US n/a n/a n/a n/a
STD 2.272 in 57.71 mm ‐0.015 in ‐0.38 mm
OS 2.286 in 58.06 mm ‐0.029 in ‐0.73 mm
2OS 2.317 in 58.86 mm ‐0.060 in ‐1.54 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐23‐805" 2:3 Lobe 8.0 Stage
1135 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 260 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1703 psi
7826 k379 ‐ 984 lpm
1428 ft‐lbs 1936 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.99 rev/gal 0.53 rev/l
199 ‐ 517 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
11739 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
80 psi 548 kpaZero Load Pressure 2142 ft‐lbs 2904 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
260 gpm (984 lpm)
180 gpm (681 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
0
100
200
300
400
500
0 200 400 600 800 1000 1200 1400 1600 1800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 39/113
Std Thrd
2.912 in 0.244 in 2.75 in 107.00 in 101.00 in 6.00 in 148 lbs
73.96 mm 6.21 mm 69.85 mm 2718 mm 2566 mm 152 mm 67 kg
* Alternate th
available
5.000 in 3.750 in 4.750 in 122.00 in 106.00 in 8.00 in 338 lbs
127.00 mm 95.25 mm 120.65 mm 3099 mm 2693 mm 203 mm 154 kg
US n/a n/a n/a n/a
STD 2.411 in 61.24 mm 0.012 in 0.30 mm
OS n/a n/a n/a n/a
2OS 2.447 in 62.15 mm ‐0.024 in ‐0.61 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐45‐355" 4:5 Lobe 3.5 Stage
520 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 780 psi
3586 k379 ‐ 946 lpm
1218 ft‐lbs 1652 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.07 rev/gal 0.29 rev/l
107 ‐ 267 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5379 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅞" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
52 psi 353 kpaZero Load Pressure 1827 ft‐lbs 2477 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100
gpm
(379
lpm)
0
500
1000
1500
2000
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 40/113
Std Thrd
2.912 in 0.244 in 2.75 in 188.00 in 182.00 in 6.00 in 253 lbs
73.96 mm 6.21 mm 69.85 mm 4775 mm 4623 mm 152 mm 115 kg
* Alternate t
available
5.000 in 3.750 in 4.750 in 207.00 in 191.00 in 8.00 in 574 lbs
127.00 mm 95.25 mm 120.65 mm 5258 mm 4852 mm 203 mm 260 kg
US n/a n/a n/a n/a
STD 2.422 in 61.52 mm 0.001 in 0.02 mm
OS 2.435 in 61.84 mm ‐0.012 in ‐0.30 mm
2OS 2.447 in 62.15 mm ‐0.024 in ‐0.61 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐45‐635" 4:5 Lobe 6.3 Stage
955 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1433 psi
6585 k379 ‐ 946 lpm
2287 ft‐lbs 3100 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.02 rev/gal 0.27 rev/l
102 ‐ 254 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
9877.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
53 psi 365 kpaZero Load Pressure 3430 ft‐lbs 4650 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
3500
0
50
100
150
200
250
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 41/113
Std Thrd
3.029 in 0.191 in 2.75 in 179.50 in 173.50 in 6.00 in 285 lbs
76.95 mm 4.86 mm 69.85 mm 4559 mm 4407 mm 152 mm 130 kg
* Alternate t
available
5.000 in 4.000 in n/a 185.00 in 169.00 in 8.00 in 422 lbs
127.00 mm 101.60 mm n/a 4699 mm 4293 mm 203 mm 192 kg
US 2.616 in 66.45 mm 0.031 in 0.77 mm
STD 2.636 in 66.95 mm 0.011 in 0.27 mm
OS n/a n/a n/a n/a
2OS 2.686 in 68.22 mm ‐0.039 in ‐1.00 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐67‐605" 6:7 Lobe 6.0 Stage
860 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 350 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1290 psi
5930 k757 ‐ 1325
2372 ft‐lbs 3216 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.87 rev/gal 0.23 rev/l
173 ‐ 303 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
8895 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
168 psi 1153 kpaZero Load Pressure 3558 ft‐lbs 4824 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
350 gpm (1325 lpm)
275 gpm (1041 lpm)
200 gpm (757 lpm)
0
500
1000
1500
2000
2500
3000
3500
0
50
100
150
200
250
300
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 42/113
Std Thrd
3.018 in 0.192 in 2.90 in 205.00 in 199.00 in 6.00 in 323 lbs
76.67 mm 4.87 mm 73.65 mm 5207 mm 5055 mm 152 mm 147 kg
* Alternate t
available
5.000 in 4.000 in n/a 212.00 in 196.00 in 8.00 in 483 lbs
127.00 mm 101.60 mm n/a 5385 mm 4979 mm 203 mm 220 kg
US n/a n/a n/a n/a
STD 2.636 in 66.95 mm ‐0.001 in ‐0.02 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐67‐705" 6:7 Lobe 7.0 Stage
1005 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 350 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1508 psi
6930 k757 ‐ 1325
2896 ft‐lbs 3926 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.87 rev/gal 0.23 rev/l
173 ‐ 303 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10395 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
210 psi 1448 kpaZero Load Pressure 4344 ft‐lbs 5889 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
350 gpm (1325 lpm)
275 gpm (1041 lpm)
200 gpm (757 lpm)
0
500
1000
1500
2000
2500
3000
3500
4000
4500
0
50
100
150
200
250
300
0 200 400 600 800 1000 1200 1400 1600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 43/113
Std Thrd
3.018 in 0.192 in 2.90 in 241.00 in 235.00 in 6.00 in 377 lbs
76.67 mm 4.87 mm 73.65 mm 6121 mm 5969 mm 152 mm 171 kg
* Alternate t
available
5.000 in 4.000 in n/a 250.00 in 234.00 in 8.00 in 570 lbs
127.00 mm 101.60 mm n/a 6350 mm 5944 mm 203 mm 259 kg
US n/a n/a n/a n/a
STD 2.636 in 66.95 mm ‐0.001 in ‐0.02 mm
OS n/a n/a n/a n/a
2OS 2.663 in 67.64 mm ‐0.028 in ‐0.70 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐67‐805" 6:7 Lobe 8.0 Stage
1215 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
150 ‐ 350 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1823 psi
8378 k568 ‐ 1325
3501 ft‐lbs 4746 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.87 rev/gal 0.23 rev/l
130 ‐ 303 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
12567 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
158 psi 1086 kpaZero Load Pressure 5251 ft‐lbs 7119 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
350 gpm (1325 lpm)
250 gpm (946 lpm)
150
gpm
(568
lpm)
0
1000
2000
3000
4000
5000
0
50
100
150
200
250
300
0 200 400 600 800 1000 1200 1400 1600 1800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 44/113
Std Thrd
2.798 in 0.163 in 2.82 in 172.50 in 166.50 in 6.00 in 242 lbs
71.08 mm 4.13 mm 71.75 mm 4382 mm 4230 mm 152 mm 110 kg
* Alternate t
available
5.000 in 3.750 in 4.750 in 180.00 in 164.00 in 8.00 in 499 lbs
127.00 mm 95.25 mm 120.65 mm 4572 mm 4166 mm 203 mm 227 kg
US n/a n/a n/a n/a
STD 2.476 in 62.89 mm ‐0.003 in ‐0.08 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐78‐205" 7:8 Lobe 2.0 Stage
280 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 420 psi
1931 k379 ‐ 946 lpm
1881 ft‐lbs 2550 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.32 rev/gal 0.09 rev/l
32 ‐ 80 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
2896.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
75 psi 511 kpaZero Load Pressure 2821 ft‐lbs 3824 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
0
10
20
30
40
50
60
70
80
90
0 50 100 150 200 250 300 350 400 450
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 45/113
Std Thrd
2.936 in 0.164 in 2.75 in 107.00 in 101.00 in 6.00 in 170 lbs
74.58 mm 4.17 mm 69.85 mm 2718 mm 2566 mm 152 mm 77 kg
* Alternate t
available
5.000 in 4.000 in 4.750 in 122.00 in 106.00 in 8.00 in 279 lbs
127.00 mm 101.60 mm 120.65 mm 3099 mm 2693 mm 203 mm 127 kg
US n/a n/a n/a n/a
STD 2.592 in 65.84 mm 0.015 in 0.39 mm
OS n/a n/a n/a n/a
2OS 2.639 in 67.03 mm ‐0.031 in ‐0.80 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐78‐225" 7:8 Lobe 2.2 Stage
335 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 503 psi
2310 k379 ‐ 946 lpm
1480 ft‐lbs 2006 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.55 rev/gal 0.15 rev/l
55 ‐ 137 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3465 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
70 psi 483 kpaZero Load Pressure 2220 ft‐lbs 3009 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
0
20
40
60
80
100
120
140
0 100 200 300 400 500
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.020
0.040
0.060
0.080
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 46/113
Std Thrd
2.798 in 0.163 in 3.00 in 242.00 in 236.50 in 5.50 in 335 lbs
71.08 mm 4.13 mm 76.20 mm 6147 mm 6007 mm 140 mm 152 kg
* Alternate t
available
5.000 in 3.750 in 4.750 in 250.00 in 234.00 in 8.00 in 693 lbs
127.00 mm 95.25 mm 120.65 mm 6350 mm 5944 mm 203 mm 314 kg
US n/a n/a n/a n/a
STD 2.470 in 62.74 mm 0.003 in 0.07 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐78‐295" 7:8 Lobe 2.9 Stage
405 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 608 psi
2793 k379 ‐ 946 lpm
2792 ft‐lbs 3785 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.34 rev/gal 0.09 rev/l
34 ‐ 83 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4189.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" H
Ext Flu
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
130 psi 896 kpaZero Load Pressure 4187 ft‐lbs 5677 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
3500
4000
4500
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 47/113
Std Thrd
2.936 in 0.164 in 2.75 in 178.00 in 172.00 in 6.00 in 277 lbs
74.58 mm 4.17 mm 69.85 mm 4521 mm 4369 mm 152 mm 126 kg
* Alternate th
available
5.000 in 3.750 in 4.750 in 187.00 in 171.00 in 8.00 in 518 lbs
127.00 mm 95.25 mm 120.65 mm 4750 mm 4344 mm 203 mm 235 kg
US n/a n/a n/a n/a
STD 2.609 in 66.27 mm ‐0.002 in ‐0.04 mm
OS 2.629 in 66.78 mm ‐0.022 in ‐0.55 mm
2OS 2.647 in 67.23 mm ‐0.039 in ‐1.00 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
500‐78‐385" 7:8 Lobe 3.8 Stage
535 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 250 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 803 psi
3689 k379 ‐ 946 lpm
2332 ft‐lbs 3162 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.53 rev/gal 0.14 rev/l
53 ‐ 131 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5533.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
1 ⅞" St
Acme B
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
85 psi 580 kpaZero Load Pressure 3498 ft‐lbs 4742 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
250 gpm (946 lpm)
175 gpm (662 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
3500
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 48/113
Std Thrd
3.955 in 0.273 in 3.50 in 192.13 in 186.13 in 6.00 in 505 lbs
100.47 mm 6.92 mm 88.90 mm 4880 mm 4728 mm 152 mm 229 kg
* Alternate t
available
6.125 in 5.000 in 6.250 in 203.50 in 187.50 in 8.00 in 645 lbs
155.58 mm 127.00 mm 158.75 mm 5169 mm 4763 mm 203 mm 293 kg
US n/a n/a n/a n/a
STD 3.398 in 86.30 mm 0.013 in 0.32 mm
OS n/a n/a n/a n/a
2OS 3.445 in 87.50 mm ‐0.035 in ‐0.88 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
618‐56‐556.1/8" 5:6 Lobe 5.5 Stage
800 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1200 psi
5516 k757 ‐ 1893
4676 ft‐lbs 6339 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.47 rev/gal 0.13 rev/l
93 ‐ 232 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
8274 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
75 psi 515 kpaZero Load Pressure 7013 ft‐lbs 9509 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200 gpm (757 lpm)
0
1000
2000
3000
4000
5000
6000
7000
0
50
100
150
200
250
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.020
0.040
0.060
0.080
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 49/113
Std Thrd
3.428 in 0.560 in 3.13 in 176.00 in 170.12 in 5.88 in 330 lbs
87.08 mm 14.23 mm 79.38 mm 4470 mm 4321 mm 149 mm 150 kg
* Alternate t
available
6.250 in 5.000 in 6.500 in 186.00 in 170.00 in 8.00 in 663 lbs
158.75 mm 127.00 mm 165.10 mm 4724 mm 4318 mm 203 mm 301 kg
US n/a n/a n/a n/a
STD 2.247 in 57.07 mm 0.621 in 15.78 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
625‐12‐386.1/4" 1:2 Lobe 3.8 Stage
480 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 720 psi
3310 k757 ‐ 1893
1296 ft‐lbs 1758 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.07 rev/gal 0.29 rev/l
214 ‐ 535 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4965 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
38 psi 260 kpaZero Load Pressure 1944 ft‐lbs 2636 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200
gpm
(757
lpm)
0
500
1000
1500
2000
0
100
200
300
400
500
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 50/113
Std Thrd
3.872 in 0.326 in 3.50 in 196.50 in 189.50 in 7.00 in 465 lbs
98.36 mm 8.28 mm 88.90 mm 4991 mm 4813 mm 178 mm 211 kg
* Alternate t
available
6.250 in 5.000 in 6.500 in 203.50 in 187.50 in 8.00 in 725 lbs
158.75 mm 127.00 mm 165.10 mm 5169 mm 4763 mm 203 mm 329 kg
US n/a n/a n/a n/a
STD 3.204 in 81.38 mm 0.016 in 0.41 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
625‐45‐756.1/4" 4:5 Lobe 7.5 Stage
1070 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
150 ‐ 400 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1605 psi
7378 k568 ‐ 1514
4065 ft‐lbs 5512 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.69 rev/gal 0.19 rev/l
104 ‐ 276 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
11067 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
53 psi 363 kpaZero Load Pressure 6098 ft‐lbs 8267 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
400 gpm (1514 lpm)
275 gpm (1041 lpm)
150 gpm (568 lpm)
0
1000
2000
3000
4000
5000
6000
0
50
100
150
200
250
0 200 400 600 800 1000 1200 1400 1600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 51/113
Std Thrd
3.893 in 0.282 in 3.50 in 121.50 in 115.50 in 6.00 in 311 lbs
98.88 mm 7.16 mm 88.90 mm 3086 mm 2934 mm 152 mm 141 kg
* Alternate t
available
6.250 in 5.000 in 6.500 in 130.00 in 114.00 in 8.00 in 463 lbs
158.75 mm 127.00 mm 165.10 mm 3302 mm 2896 mm 203 mm 210 kg
US n/a n/a n/a n/a
STD 3.323 in 84.41 mm 0.006 in 0.15 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
625‐56‐456.1/4" 5:6 Lobe 4.5 Stage
680 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 400 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1020 psi
4689 k379 ‐ 1514
2590 ft‐lbs 3511 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.62 rev/gal 0.17 rev/l
62 ‐ 248 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7033.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
0 psi 0 kpaZero Load Pressure 3885 ft‐lbs 5267 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
400 gpm (1514 lpm)
250 gpm (946 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
3500
4000
0
50
100
150
200
250
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 52/113
Std Thrd
3.955 in 0.273 in 3.50 in 192.13 in 186.13 in 6.00 in 505 lbs
100.47 mm 6.92 mm 88.90 mm 4880 mm 4728 mm 152 mm 229 kg
* Alternate t
available
6.250 in 5.000 in 6.125 in 203.50 in 187.50 in 8.00 in 725 lbs
158.75 mm 127.00 mm 155.58 mm 5169 mm 4763 mm 203 mm 329 kg
US n/a n/a n/a n/a
STD 3.398 in 86.30 mm 0.013 in 0.32 mm
OS n/a n/a n/a n/a
2OS 3.445 in 87.50 mm ‐0.035 in ‐0.88 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
625‐56‐556.1/4" 5:6 Lobe 5.5 Stage
800 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1200 psi
5516 k757 ‐ 1893
4676 ft‐lbs 6339 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.47 rev/gal 0.13 rev/l
93 ‐ 232 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
8274 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
75 psi 515 kpaZero Load Pressure 7013 ft‐lbs 9509 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200 gpm (757 lpm)
0
1000
2000
3000
4000
5000
6000
7000
0
50
100
150
200
250
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.020
0.040
0.060
0.080
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 53/113
Std Thrd
3.980 in 0.225 in 3.50 in 117.00 in 111.00 in 6.00 in 336 lbs
101.10 mm 5.72 mm 88.90 mm 2972 mm 2820 mm 152 mm 152 kg
* Alternate t
available
6.250 in 5.000 in 6.500 in 130.00 in 114.00 in 8.00 in 463 lbs
158.75 mm 127.00 mm 165.10 mm 3302 mm 2896 mm 203 mm 210 kg
US n/a n/a n/a n/a
STD 3.525 in 89.54 mm 0.005 in 0.12 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
625‐78‐286.1/4" 7:8 Lobe 2.8 Stage
425 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
150 ‐ 400 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 638 psi
2931 k568 ‐ 1514
2784 ft‐lbs 3775 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.33 rev/gal 0.09 rev/l
50 ‐ 132 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4396.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
42 psi 284 kpaZero Load Pressure 4176 ft‐lbs 5662 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
400 gpm (1514 lpm)
275 gpm (1041 lpm)
150 gpm (568 lpm)
0
500
1000
1500
2000
2500
3000
3500
4000
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 54/113
Std Thrd
4.203 in 0.233 in 4.00 in 221.00 in 215.00 in 6.00 in 696 lbs
106.76 mm 5.92 mm 101.60 mm 5613 mm 5461 mm 152 mm 316 kg
* Alternate t
available
6.250 in 5.000 in 6.500 in 228.75 in 212.75 in 8.00 in 815 lbs
158.75 mm 127.00 mm 165.10 mm 5810 mm 5404 mm 203 mm 370 kg
US n/a n/a n/a n/a
STD 3.726 in 94.64 mm 0.011 in 0.28 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
625‐78‐296.1/4" 7:8 Lobe 2.9 Stage
425 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 638 psi
2931 k757 ‐ 1893
6277 ft‐lbs 8511 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.17 rev/gal 0.05 rev/l
33 ‐ 82 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4396.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
74 psi 505 kpaZero Load Pressure 9416 ft‐lbs 12766 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200 gpm (757 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 55/113
Std Thrd
3.980 in 0.225 in 3.50 in 194.50 in 188.50 in 6.00 in 547 lbs
101.10 mm 5.72 mm 88.90 mm 4940 mm 4788 mm 152 mm 248 kg
* Alternate t
available
6.250 in 5.000 in 6.500 in 203.50 in 187.50 in 8.00 in 725 lbs
158.75 mm 127.00 mm 165.10 mm 5169 mm 4763 mm 203 mm 329 kg
US n/a n/a n/a n/a
STD 3.533 in 89.74 mm ‐0.003 in ‐0.08 mm
OS 3.553 in 90.25 mm ‐0.023 in ‐0.59 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
625‐78‐486.1/4" 7:8 Lobe 4.8 Stage
700 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
150 ‐ 400 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1050 psi
4827 k568 ‐ 1514
4774 ft‐lbs 6472 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.33 rev/gal 0.09 rev/l
50 ‐ 132 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7240.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
57 psi 391 kpaZero Load Pressure 7160 ft‐lbs 9708 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
400 gpm (1514 lpm)
275 gpm (1041 lpm)
150 gpm (568 lpm)
0
1000
2000
3000
4000
5000
6000
7000
0
20
40
60
80
100
120
140
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 56/113
Std Thrd
3.428 in 0.560 in 3.13 in 180.38 in 174.50 in 5.88 in 338 lbs
87.08 mm 14.23 mm 79.38 mm 4582 mm 4433 mm 149 mm 153 kg
* Alternate t
available
6.500 in 5.000 in 6.250 in 186.00 in 170.00 in 8.00 in 813 lbs
165.10 mm 127.00 mm 158.75 mm 4724 mm 4318 mm 203 mm 369 kg
US n/a n/a n/a n/a
STD 2.247 in 57.07 mm 0.621 in 15.78 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐12‐406.1/2" 1:2 Lobe 4.0 Stage
480 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 720 psi
3310 k757 ‐ 1893
1296 ft‐lbs 1758 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.07 rev/gal 0.29 rev/l
214 ‐ 535 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4965 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
38 psi 260 kpaZero Load Pressure 1944 ft‐lbs 2636 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200
gpm
(757
lpm)
0
500
1000
1500
2000
0
100
200
300
400
500
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 57/113
Std Thrd
4.219 in 0.354 in 4.00 in 141.50 in 135.50 in 6.00 in 403 lbs
107.18 mm 8.99 mm 101.60 mm 3594 mm 3442 mm 152 mm 183 kg
* Alternate t
available
6.500 in 5.500 in 6.750 in 153.50 in 137.50 in 8.00 in 467 lbs
165.10 mm 139.70 mm 171.45 mm 3899 mm 3493 mm 203 mm 212 kg
US n/a n/a n/a n/a
STD 3.500 in 88.90 mm 0.012 in 0.29 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐45‐486.1/2" 4:5 Lobe 4.8 Stage
695 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1043 psi
4792 k1136 ‐ 2271
3395 ft‐lbs 4603 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.51 rev/gal 0.14 rev/l
152 ‐ 304 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7188 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
58 psi 399 kpaZero Load Pressure 5092 ft‐lbs 6904 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
0
50
100
150
200
250
300
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 58/113
Std Thrd
4.219 in 0.354 in 4.00 in 202.50 in 195.50 in 7.00 in 571 lbs
107.18 mm 8.99 mm 101.60 mm 5144 mm 4966 mm 178 mm 259 kg
* Alternate t
available
6.500 in 5.500 in 6.750 in 214.63 in 198.63 in 8.00 in 652 lbs
165.10 mm 139.70 mm 171.45 mm 5451 mm 5045 mm 203 mm 296 kg
US n/a n/a n/a n/a
STD 3.507 in 89.08 mm 0.005 in 0.11 mm
OS 3.539 in 89.89 mm ‐0.027 in ‐0.70 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐45‐706.1/2" 4:5 Lobe 7.0 Stage
1015 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1523 psi
6999 k1136 ‐ 2271
4821 ft‐lbs 6536 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.52 rev/gal 0.14 rev/l
156 ‐ 311 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10498.5
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
123 psi 846 kpaZero Load Pressure 7231 ft‐lbs 9804 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
0
50
100
150
200
250
300
0 200 400 600 800 1000 1200 1400 1600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 59/113
Std Thrd
3.872 in 0.326 in 3.50 in 196.50 in 189.50 in 7.00 in 465 lbs
98.36 mm 8.28 mm 88.90 mm 4991 mm 4813 mm 178 mm 211 kg
* Alternate t
available
6.500 in 5.000 in 6.250 in 203.50 in 187.50 in 8.00 in 889 lbs
165.10 mm 127.00 mm 158.75 mm 5169 mm 4763 mm 203 mm 404 kg
US n/a n/a n/a n/a
STD 3.204 in 81.38 mm 0.016 in 0.41 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐45‐756.1/2" 4:5 Lobe 7.5 Stage
1070 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
150 ‐ 400 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1605 psi
7378 k568 ‐ 1514
4065 ft‐lbs 5512 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.69 rev/gal 0.19 rev/l
104 ‐ 276 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
11067 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
53 psi 363 kpaZero Load Pressure 6098 ft‐lbs 8267 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
400 gpm (1514 lpm)
275 gpm (1041 lpm)
150 gpm (568 lpm)
0
1000
2000
3000
4000
5000
6000
0
50
100
150
200
250
0 200 400 600 800 1000 1200 1400 1600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 60/113
Std Thrd
3.893 in 0.282 in 3.50 in 121.50 in 115.50 in 6.00 in 311 lbs
98.88 mm 7.16 mm 88.90 mm 3086 mm 2934 mm 152 mm 141 kg
* Alternate t
available
6.500 in 5.000 in 6.250 in 130.00 in 114.00 in 8.00 in 568 lbs
165.10 mm 127.00 mm 158.75 mm 3302 mm 2896 mm 203 mm 258 kg
US n/a n/a n/a n/a
STD 3.323 in 84.41 mm 0.006 in 0.15 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐56‐456.1/2" 5:6 Lobe 4.5 Stage
680 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
100 ‐ 400 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1020 psi
4689 k379 ‐ 1514
2590 ft‐lbs 3511 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.62 rev/gal 0.17 rev/l
62 ‐ 248 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7033.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
0 psi 0 kpaZero Load Pressure 3885 ft‐lbs 5267 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
400 gpm (1514 lpm)
250 gpm (946 lpm)
100 gpm (379 lpm)
0
500
1000
1500
2000
2500
3000
3500
4000
0
50
100
150
200
250
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 61/113
Std Thrd
4.316 in 0.313 in 4.13 in 222.00 in 213.37 in 8.63 in 694 lbs
109.64 mm 7.96 mm 104.78 mm 5639 mm 5420 mm 219 mm 315 kg
* Alternate t
available
6.500 in 5.500 in 6.750 in 227.00 in 211.00 in 8.00 in 690 lbs
165.10 mm 139.70 mm 171.45 mm 5766 mm 5360 mm 203 mm 313 kg
US n/a n/a n/a n/a
STD 3.673 in 93.30 mm 0.017 in 0.42 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐56‐686.1/2" 5:6 Lobe 6.8 Stage
970 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1455 psi
6688 k1136 ‐ 2271
6040 ft‐lbs 8189 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.41 rev/gal 0.11 rev/l
123 ‐ 246 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10032 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
107 psi 732 kpaZero Load Pressure 9059 ft‐lbs 12283 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
50
100
150
200
250
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 62/113
Std Thrd
4.316 in 0.288 in 4.00 in 194.00 in 188.00 in 6.00 in 615 lbs
109.62 mm 7.32 mm 101.60 mm 4928 mm 4776 mm 152 mm 279 kg
* Alternate t
available
6.500 in 5.500 in 6.750 in 200.00 in 184.00 in 8.00 in 608 lbs
165.10 mm 139.70 mm 171.45 mm 5080 mm 4674 mm 203 mm 276 kg
US 3.726 in 94.63 mm 0.014 in 0.34 mm
STD 3.738 in 94.95 mm 0.001 in 0.02 mm
OS 3.766 in 95.65 mm ‐0.027 in ‐0.68 mm
2OS 3.798 in 96.47 mm ‐0.059 in ‐1.50 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐67‐506.1/2" 6:7 Lobe 5.0 Stage
715 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1073 psi
4930 k1136 ‐ 2271
5699 ft‐lbs 7727 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.31 rev/gal 0.09 rev/l
93 ‐ 186 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7395 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
81 psi 556 kpaZero Load Pressure 8548 ft‐lbs 11590 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 63/113
Std Thrd
4.295 in 0.244 in 4.00 in 147.25 in 140.25 in 7.00 in 492 lbs
109.11 mm 6.20 mm 101.60 mm 3740 mm 3562 mm 178 mm 223 kg
* Alternate t
available
6.500 in 5.500 in 6.750 in 153.50 in 137.50 in 8.00 in 467 lbs
165.10 mm 139.70 mm 171.45 mm 3899 mm 3493 mm 203 mm 212 kg
US 3.777 in 95.93 mm 0.031 in 0.78 mm
STD 3.793 in 96.34 mm 0.015 in 0.38 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐78‐206.1/2" 7:8 Lobe 2.0 Stage
280 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 420 psi
1931 k757 ‐ 1893
4052 ft‐lbs 5493 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.18 rev/gal 0.05 rev/l
35 ‐ 87 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
2896.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
57 psi 388 kpaZero Load Pressure 6077 ft‐lbs 8239 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200
gpm
(757
lpm)
0
1000
2000
3000
4000
5000
6000
0
10
20
30
40
50
60
70
80
90
0 50 100 150 200 250 300 350 400 450
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 64/113
Std Thrd
3.980 in 0.225 in 3.50 in 117.00 in 111.00 in 6.00 in 336 lbs
101.10 mm 5.72 mm 88.90 mm 2972 mm 2820 mm 152 mm 152 kg
* Alternate t
available
6.500 in 5.000 in 6.250 in 130.00 in 114.00 in 8.00 in 568 lbs
165.10 mm 127.00 mm 158.75 mm 3302 mm 2896 mm 203 mm 258 kg
US n/a n/a n/a n/a
STD 3.525 in 89.54 mm 0.005 in 0.13 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐78‐286.1/2" 7:8 Lobe 2.8 Stage
425 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
150 ‐ 400 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 638 psi
2931 k568 ‐ 1514
2784 ft‐lbs 3775 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.33 rev/gal 0.09 rev/l
50 ‐ 132 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4396.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
42 psi 284 kpaZero Load Pressure 4176 ft‐lbs 5662 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
400 gpm (1514 lpm)
275 gpm (1041 lpm)
150 gpm (568 lpm)
0
500
1000
1500
2000
2500
3000
3500
4000
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 65/113
Std Thrd
4.203 in 0.233 in 4.00 in 221.00 in 215.00 in 6.00 in 696 lbs
106.76 mm 5.92 mm 101.60 mm 5613 mm 5461 mm 152 mm 316 kg
* Alternate t
available
6.500 in 5.500 in 6.250 in 228.75 in 212.75 in 8.00 in 695 lbs
165.10 mm 139.70 mm 158.75 mm 5810 mm 5404 mm 203 mm 316 kg
US n/a n/a n/a n/a
STD 3.726 in 94.64 mm 0.011 in 0.28 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐78‐296.1/2" 7:8 Lobe 2.9 Stage
425 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 638 psi
2931 k757 ‐ 1893
6277 ft‐lbs 8511 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.17 rev/gal 0.05 rev/l
33 ‐ 82 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4396.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
74 psi 505 kpaZero Load Pressure 9416 ft‐lbs 12766 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200 gpm (757 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 66/113
Std Thrd
4.517 in 0.252 in 4.00 in 118.50 in 112.50 in 6.00 in 439 lbs
114.74 mm 6.40 mm 101.60 mm 3010 mm 2858 mm 152 mm 199 kg
* Alternate t
available
6.500 in 5.500 in 6.750 in 131.00 in 115.00 in 8.00 in 399 lbs
165.10 mm 139.70 mm 171.45 mm 3327 mm 2921 mm 203 mm 181 kg
US n/a n/a n/a n/a
STD 4.008 in 101.80 mm 0.006 in 0.14 mm
OS 4.033 in 102.45 mm ‐0.020 in ‐0.51 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐78‐306.1/2" 7:8 Lobe 3.0 Stage
460 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 690 psi
3172 k1136 ‐ 2271
3830 ft‐lbs 5193 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.29 rev/gal 0.08 rev/l
87 ‐ 173 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4758 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
63 psi 430 kpaZero Load Pressure 5745 ft‐lbs 7790 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.020
0.040
0.060
0.080
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 67/113
Std Thrd
3.980 in 0.225 in 3.50 in 194.50 in 188.50 in 6.00 in 547 lbs
101.10 mm 5.72 mm 88.90 mm 4940 mm 4788 mm 152 mm 248 kg
* Alternate t
available
6.500 in 5.000 in 6.250 in 203.50 in 187.50 in 8.00 in 889 lbs
165.10 mm 127.00 mm 158.75 mm 5169 mm 4763 mm 203 mm 404 kg
US n/a n/a n/a n/a
STD 3.533 in 89.74 mm ‐0.003 in ‐0.08 mm
OS 3.553 in 90.25 mm ‐0.023 in ‐0.59 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐78‐486.1/2" 7:8 Lobe 4.8 Stage
700 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
150 ‐ 400 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1050 psi
4827 k568 ‐ 1514
4774 ft‐lbs 6472 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.33 rev/gal 0.09 rev/l
50 ‐ 132 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7240.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅜" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
57 psi 391 kpaZero Load Pressure 7160 ft‐lbs 9708 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
400 gpm (1514 lpm)
275 gpm (1041 lpm)
150 gpm (568 lpm)
0
1000
2000
3000
4000
5000
6000
7000
0
20
40
60
80
100
120
140
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 68/113
Std Thrd
4.517 in 0.252 in 4.00 in 188.00 in 182.00 in 6.00 in 684 lbs
114.74 mm 6.40 mm 101.60 mm 4775 mm 4623 mm 152 mm 310 kg
* Alternate t
available
6.500 in 5.500 in 6.750 in 194.00 in 178.00 in 8.00 in 590 lbs
165.10 mm 139.70 mm 171.45 mm 4928 mm 4522 mm 203 mm 268 kg
US n/a n/a n/a n/a
STD 4.000 in 101.60 mm 0.013 in 0.34 mm
OS 4.033 in 102.44 mm ‐0.020 in ‐0.50 mm
2OS 4.058 in 103.07 mm ‐0.044 in ‐1.13 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐78‐506.1/2" 7:8 Lobe 5.0 Stage
720 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1080 psi
4965 k1136 ‐ 2271
5973 ft‐lbs 8098 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.29 rev/gal 0.08 rev/l
87 ‐ 174 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7447.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
122 psi 838 kpaZero Load Pressure 8959 ft‐lbs 12147 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
1000
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 69/113
Std Thrd
4.600 in 0.241 in 4.00 in 118.50 in 112.50 in 6.00 in 461 lbs
116.84 mm 6.13 mm 101.60 mm 3010 mm 2858 mm 152 mm 209 kg
* Alternate t
available
6.500 in 5.500 in 6.750 in 131.00 in 115.00 in 8.00 in 398 lbs
165.10 mm 139.70 mm 171.45 mm 3327 mm 2921 mm 203 mm 181 kg
US n/a n/a n/a n/a
STD 4.067 in 103.30 mm 0.051 in 1.29 mm
OS 4.100 in 104.14 mm 0.018 in 0.44 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐89‐306.1/2" 8:9 Lobe 3.0 Stage
455 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 683 psi
3138 k757 ‐ 1893
4418 ft‐lbs 5990 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.3 rev/gal 0.08 rev/l
60 ‐ 150 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4707 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
87 psi 597 kpaZero Load Pressure 6627 ft‐lbs 8985 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200 gpm (757 lpm)
0
1000
2000
3000
4000
5000
6000
7000
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
1.0
2.0
3.0
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 70/113
Std Thrd
4.320 in 0.216 in 3.75 in 152.00 in 146.00 in 6.00 in 521 lbs
109.73 mm 5.49 mm 95.25 mm 3861 mm 3709 mm 152 mm 237 kg
* Alternate t
available
6.500 in 5.250 in n/a 170.00 in 154.00 in 8.00 in 633 lbs
165.10 mm 133.35 mm n/a 4318 mm 3912 mm 203 mm 287 kg
US n/a n/a n/a n/a
STD 3.673 in 93.30 mm 0.215 in 5.46 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
650‐89‐406.1/2" 8:9 Lobe 4.0 Stage
605 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 908 psi
4172 k757 ‐ 1893
4674 ft‐lbs 6337 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.29 rev/gal 0.08 rev/l
58 ‐ 145 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
6258 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
66 psi 454 kpaZero Load Pressure 7011 ft‐lbs 9505 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200 gpm (757 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700 800 900 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 71/113
Std Thrd
3.919 in 0.487 in 3.92 in 194.00 in 188.00 in 6.00 in 389 lbs
99.54 mm 12.37 mm 99.55 mm 4928 mm 4776 mm 152 mm 177 kg
* Alternate t
available
6.750 in 5.500 in n/a 200.00 in 184.00 in 8.00 in 776 lbs
171.45 mm 139.70 mm n/a 5080 mm 4674 mm 203 mm 352 kg
US n/a n/a n/a n/a
STD n/a n/a n/a n/a
OS 2.973 in 75.51 mm ‐0.028 in ‐0.72 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐23‐706.3/4" 2:3 Lobe 7.0 Stage
945 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1418 psi
6516 k1136 ‐ 2271
2934 ft‐lbs 3977 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.85 rev/gal 0.23 rev/l
255 ‐ 510 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
9774 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
48 psi 330 kpaZero Load Pressure 4400 ft‐lbs 5966 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
500
1000
1500
2000
2500
3000
3500
4000
4500
0
100
200
300
400
500
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 72/113
Std Thrd
4.219 in 0.354 in 4.00 in 141.50 in 135.50 in 6.00 in 403 lbs
107.18 mm 8.99 mm 101.60 mm 3594 mm 3442 mm 152 mm 183 kg
* Alternate t
available
6.750 in 5.500 in 6.500 in 153.50 in 137.50 in 8.00 in 595 lbs
171.45 mm 139.70 mm 165.10 mm 3899 mm 3493 mm 203 mm 270 kg
US n/a n/a n/a n/a
STD 3.500 in 88.90 mm 0.012 in 0.29 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐45‐486.3/4" 4:5 Lobe 4.8 Stage
695 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1043 psi
4792 k1136 ‐ 2271
3395 ft‐lbs 4603 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.51 rev/gal 0.14 rev/l
152 ‐ 304 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7188 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
58 psi 399 kpaZero Load Pressure 5092 ft‐lbs 6904 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
0
50
100
150
200
250
300
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 73/113
Std Thrd
4.219 in 0.354 in 4.00 in 202.50 in 195.50 in 7.00 in 571 lbs
107.18 mm 8.99 mm 101.60 mm 5144 mm 4966 mm 178 mm 259 kg
* Alternate t
available
6.750 in 5.500 in 6.500 in 214.63 in 198.63 in 8.00 in 832 lbs
171.45 mm 139.70 mm 165.10 mm 5451 mm 5045 mm 203 mm 378 kg
US n/a n/a n/a n/a
STD 3.507 in 89.08 mm 0.005 in 0.11 mm
OS 3.539 in 89.89 mm ‐0.027 in ‐0.70 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐45‐706.3/4" 4:5 Lobe 7.0 Stage
1015 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1523 psi
6999 k1136 ‐ 2271
4821 ft‐lbs 6536 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.52 rev/gal 0.14 rev/l
156 ‐ 311 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10498.5
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
123 psi 846 kpaZero Load Pressure 7231 ft‐lbs 9804 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
0
50
100
150
200
250
300
0 200 400 600 800 1000 1200 1400 1600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 74/113
Std Thrd
4.316 in 0.313 in 4.13 in 222.00 in 213.37 in 8.63 in 694 lbs
109.64 mm 7.96 mm 104.78 mm 5639 mm 5420 mm 219 mm 315 kg
* Alternate t
available
6.750 in 5.500 in 6.500 in 227.00 in 211.00 in 8.00 in 880 lbs
171.45 mm 139.70 mm 165.10 mm 5766 mm 5360 mm 203 mm 400 kg
US n/a n/a n/a n/a
STD 3.673 in 93.30 mm 0.017 in 0.42 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐56‐686.3/4" 5:6 Lobe 6.8 Stage
970 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1455 psi
6688 k1136 ‐ 2271
6040 ft‐lbs 8189 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.41 rev/gal 0.11 rev/l
123 ‐ 246 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10032 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
107 psi 732 kpaZero Load Pressure 9059 ft‐lbs 12283 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
50
100
150
200
250
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 75/113
Std Thrd
4.316 in 0.288 in 4.00 in 194.00 in 188.00 in 6.00 in 615 lbs
109.62 mm 7.32 mm 101.60 mm 4928 mm 4776 mm 152 mm 279 kg
* Alternate t
available
6.750 in 5.500 in 6.500 in 200.00 in 184.00 in 8.00 in 776 lbs
171.45 mm 139.70 mm 165.10 mm 5080 mm 4674 mm 203 mm 352 kg
US 3.726 in 94.63 mm 0.014 in 0.34 mm
STD 3.738 in 94.95 mm 0.001 in 0.02 mm
OS 3.766 in 95.65 mm ‐0.027 in ‐0.68 mm
2OS 3.798 in 96.47 mm ‐0.059 in ‐1.50 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐67‐506.3/4" 6:7 Lobe 5.0 Stage
715 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1073 psi
4930 k1136 ‐ 2271
5699 ft‐lbs 7727 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.31 rev/gal 0.09 rev/l
93 ‐ 186 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7395 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
81 psi 556 kpaZero Load Pressure 8548 ft‐lbs 11590 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 76/113
Std Thrd
4.316 in 0.288 in 4.00 in 242.00 in 236.00 in 6.00 in 761 lbs
109.62 mm 7.32 mm 101.60 mm 6147 mm 5995 mm 152 mm 346 kg
* Alternate t
available
6.750 in 5.500 in n/a 250.00 in 234.00 in 8.00 in 969 lbs
171.45 mm 139.70 mm n/a 6350 mm 5944 mm 203 mm 440 kg
US n/a n/a n/a n/a
STD 3.738 in 94.95 mm 0.001 in 0.02 mm
OS 3.766 in 95.66 mm ‐0.027 in ‐0.69 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐67‐606.3/4" 6:7 Lobe 6.0 Stage
925 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1388 psi
6378 k1136 ‐ 2271
7709 ft‐lbs 10451 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.31 rev/gal 0.09 rev/l
93 ‐ 186 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
9567 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
138 psi 946 kpaZero Load Pressure 11563 ft‐lbs 15677 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 77/113
Std Thrd
4.295 in 0.244 in 4.00 in 147.25 in 140.25 in 7.00 in 492 lbs
109.11 mm 6.20 mm 101.60 mm 3740 mm 3562 mm 178 mm 223 kg
* Alternate t
available
6.750 in 5.500 in 6.500 in 153.50 in 137.50 in 8.00 in 595 lbs
171.45 mm 139.70 mm 165.10 mm 3899 mm 3493 mm 203 mm 270 kg
US 3.777 in 95.93 mm 0.031 in 0.78 mm
STD 3.793 in 96.34 mm 0.015 in 0.38 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐78‐206.3/4" 7:8 Lobe 2.0 Stage
280 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 420 psi
1931 k757 ‐ 1893
4052 ft‐lbs 5493 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.18 rev/gal 0.05 rev/l
35 ‐ 87 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
2896.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
57 psi 388 kpaZero Load Pressure 6077 ft‐lbs 8239 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200
gpm
(757
lpm)
0
1000
2000
3000
4000
5000
6000
0
10
20
30
40
50
60
70
80
90
0 50 100 150 200 250 300 350 400 450
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 78/113
Std Thrd
4.295 in 0.244 in 4.00 in 213.50 in 206.50 in 7.00 in 702 lbs
109.11 mm 6.20 mm 101.60 mm 5423 mm 5245 mm 178 mm 319 kg
* Alternate t
available
6.750 in 5.500 in 6.500 in 220.00 in 204.00 in 8.00 in 853 lbs
171.45 mm 139.70 mm 165.10 mm 5588 mm 5182 mm 203 mm 387 kg
US n/a n/a n/a n/a
STD 3.793 in 96.34 mm 0.015 in 0.38 mm
OS 3.837 in 97.46 mm ‐0.029 in ‐0.74 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐78‐296.3/4" 7:8 Lobe 2.9 Stage
425 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 638 psi
2931 k757 ‐ 1893
6135 ft‐lbs 8318 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.17 rev/gal 0.05 rev/l
34 ‐ 84 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4396.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
79 psi 543 kpaZero Load Pressure 9203 ft‐lbs 12477 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200 gpm (757 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 79/113
Std Thrd
4.517 in 0.252 in 4.00 in 118.50 in 112.50 in 6.00 in 439 lbs
114.74 mm 6.40 mm 101.60 mm 3010 mm 2858 mm 152 mm 199 kg
* Alternate t
available
6.750 in 5.500 in 6.500 in 131.00 in 115.00 in 8.00 in 508 lbs
171.45 mm 139.70 mm 165.10 mm 3327 mm 2921 mm 203 mm 231 kg
US n/a n/a n/a n/a
STD 4.008 in 101.80 mm 0.006 in 0.14 mm
OS 4.033 in 102.45 mm ‐0.020 in ‐0.51 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐78‐306.3/4" 7:8 Lobe 3.0 Stage
460 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 690 psi
3172 k1136 ‐ 2271
3830 ft‐lbs 5193 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.29 rev/gal 0.08 rev/l
87 ‐ 173 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4758 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
63 psi 430 kpaZero Load Pressure 5745 ft‐lbs 7790 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.000
0.020
0.040
0.060
0.080
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 80/113
Std Thrd
4.517 in 0.252 in 4.00 in 188.00 in 182.00 in 6.00 in 684 lbs
114.74 mm 6.40 mm 101.60 mm 4775 mm 4623 mm 152 mm 310 kg
* Alternate t
available
6.750 in 5.500 in 6.500 in 194.00 in 178.00 in 8.00 in 752 lbs
171.45 mm 139.70 mm 165.10 mm 4928 mm 4522 mm 203 mm 342 kg
US n/a n/a n/a n/a
STD 4.000 in 101.60 mm 0.013 in 0.34 mm
OS 4.033 in 102.44 mm ‐0.020 in ‐0.50 mm
2OS 4.058 in 103.07 mm ‐0.044 in ‐1.13 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐78‐506.3/4" 7:8 Lobe 5.0 Stage
720 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1080 psi
4965 k1136 ‐ 2271
5973 ft‐lbs 8098 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.29 rev/gal 0.08 rev/l
87 ‐ 174 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7447.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
122 psi 838 kpaZero Load Pressure 8959 ft‐lbs 12147 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
1000
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 81/113
Std Thrd
4.643 in 0.246 in 4.00 in 251.88 in 244.88 in 7.00 in 974 lbs
117.93 mm 6.25 mm 101.60 mm 6398 mm 6220 mm 178 mm 442 kg
* Alternate t
available
6.750 in 5.500 in n/a 260.00 in 244.00 in 8.00 in 1008 lbs
171.45 mm 139.70 mm n/a 6604 mm 6198 mm 203 mm 458 kg
US n/a n/a n/a n/a
STD 4.137 in 105.07 mm 0.014 in 0.36 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐78‐576.3/4" 7:8 Lobe 5.7 Stage
845 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1268 psi
5827 k1136 ‐ 2271
8205 ft‐lbs 11124 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.25 rev/gal 0.07 rev/l
75 ‐ 150 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
8740.5 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
151 psi 1041 kpaZero Load Pressure 12307 ft‐lbs 16685 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 82/113
Std Thrd
4.425 in 0.243 in 4.00 in 232.50 in 225.50 in 7.00 in 814 lbs
112.40 mm 6.16 mm 101.60 mm 5906 mm 5728 mm 178 mm 370 kg
* Alternate t
available
6.750 in 5.500 in 7.000 in 250.00 in 234.00 in 8.00 in 969 lbs
171.45 mm 139.70 mm 177.80 mm 6350 mm 5944 mm 203 mm 440 kg
US n/a n/a n/a n/a
STD 3.941 in 100.10 mm ‐0.001 in ‐0.03 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐78‐646.3/4" 7:8 Lobe 6.4 Stage
995 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1493 psi
6861 k1136 ‐ 2271
7580 ft‐lbs 10277 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.31 rev/gal 0.09 rev/l
92 ‐ 183 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10291.5
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
137 psi 940 kpaZero Load Pressure 11370 ft‐lbs 15416 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 83/113
Std Thrd
4.600 in 0.241 in 4.00 in 118.50 in 112.50 in 6.00 in 461 lbs
116.84 mm 6.13 mm 101.60 mm 3010 mm 2858 mm 152 mm 209 kg
* Alternate t
available
6.750 in 5.500 in 6.500 in 131.00 in 115.00 in 8.00 in 508 lbs
171.45 mm 139.70 mm 165.10 mm 3327 mm 2921 mm 203 mm 231 kg
US n/a n/a n/a n/a
STD 4.067 in 103.30 mm 0.051 in 1.29 mm
OS 4.100 in 104.14 mm 0.018 in 0.44 mm
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
675‐89‐306.3/4" 8:9 Lobe 3.0 Stage
455 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
200 ‐ 500 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 683 psi
3138 k757 ‐ 1893
4418 ft‐lbs 5990 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.3 rev/gal 0.08 rev/l
60 ‐ 150 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4707 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
87 psi 597 kpaZero Load Pressure 6627 ft‐lbs 8985 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
500 gpm (1893 lpm)
350 gpm (1325 lpm)
200 gpm (757 lpm)
0
1000
2000
3000
4000
5000
6000
7000
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full LoadPowerPLUS™
Full Load
0.0
1.0
2.0
3.0
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 84/113
Std Thrd
4.868 in 0.155 in 4.25 in 238.50 in 232.50 in 6.00 in 1108 lbs
123.64 mm 3.93 mm 107.95 mm 6058 mm 5906 mm 152 mm 503 kg
* Alternate th
available
7.000 in 5.750 in n/a 250.00 in 234.00 in 8.00 in 1009 lbs
177.80 mm 146.05 mm n/a 6350 mm 5944 mm 203 mm 458 kg
US n/a n/a n/a n/a
STD 4.576 in 116.22 mm ‐0.017 in ‐0.44 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
700‐23‐837" 2:3 Lobe 8.3 Stage
1135 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1703 psi
7826 k1136 ‐ 2271
1881 ft‐lbs 2550 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
1.57 rev/gal 0.42 rev/l
470 ‐ 939 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
11739 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
#N/A
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
265 psi 1821 kpaZero Load Pressure 2822 ft‐lbs 3825 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
500
1000
1500
2000
2500
3000
0
100
200
300
400
500
600
700
800
900
1000
0 200 400 600 800 1000 1200 1400 1600 1800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 85/113
Std Thrd
4.606 in 0.258 in 4.38 in 191.00 in 184.00 in 7.00 in 729 lbs
117.01 mm 6.56 mm 111.25 mm 4851 mm 4673 mm 178 mm 331 kg
* Alternate t
available
7.000 in 5.750 in n/a 200.00 in 184.00 in 8.00 in 807 lbs
177.80 mm 146.05 mm n/a 5080 mm 4674 mm 203 mm 366 kg
US n/a n/a n/a n/a
STD 4.092 in 103.94 mm ‐0.002 in ‐0.06 mm
OS 4.113 in 104.47 mm ‐0.023 in ‐0.59 mm
2OS 4.142 in 105.21 mm ‐0.052 in ‐1.33 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
700‐78‐607" 7:8 Lobe 6.0 Stage
885 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1328 psi
6102 k1136 ‐ 2271
6437 ft‐lbs 8727 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.34 rev/gal 0.09 rev/l
100 ‐ 200 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
9153 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
113 psi 776 kpaZero Load Pressure 9655 ft‐lbs 13091 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
0
50
100
150
200
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 86/113
Std Thrd
4.425 in 0.243 in 4.00 in 232.50 in 225.50 in 7.00 in 814 lbs
112.40 mm 6.16 mm 101.60 mm 5906 mm 5728 mm 178 mm 370 kg
* Alternate t
available
7.000 in 5.500 in 6.750 in 250.00 in 234.00 in 8.00 in 1187 lbs
177.80 mm 139.70 mm 171.45 mm 6350 mm 5944 mm 203 mm 539 kg
US n/a n/a n/a n/a
STD 3.941 in 100.10 mm ‐0.001 in ‐0.03 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
700‐78‐647" 7:8 Lobe 6.4 Stage
995 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1493 psi
6861 k1136 ‐ 2271
7580 ft‐lbs 10277 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.31 rev/gal 0.09 rev/l
92 ‐ 183 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10291.5
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
137 psi 940 kpaZero Load Pressure 11370 ft‐lbs 15416 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 87/113
Std Thrd
4.606 in 0.258 in 4.38 in 241.00 in 234.00 in 7.00 in 911 lbs
117.01 mm 6.56 mm 111.25 mm 6121 mm 5943 mm 178 mm 414 kg
* Alternate t
available
7.000 in 5.750 in n/a 250.00 in 234.00 in 8.00 in 1009 lbs
177.80 mm 146.05 mm n/a 6350 mm 5944 mm 203 mm 458 kg
US n/a n/a n/a n/a
STD 4.092 in 103.94 mm ‐0.002 in ‐0.06 mm
OS 4.113 in 104.47 mm ‐0.023 in ‐0.59 mm
2OS 4.163 in 105.74 mm ‐0.073 in ‐1.86 mm
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
700‐78‐757" 7:8 Lobe 7.5 Stage
1120 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 600 gpmFlow Range
Revs per Unit Volume
Speed (No Load) 1680 psi
7723 k1136 ‐ 2271
8508 ft‐lbs 11535 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.31 rev/gal 0.09 rev/l
93 ‐ 186 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
11584.5
Power Section Specificat
PowerPLUS™ Max ΔPressure
2 ⅞" A
Box *
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
119 psi 819 kpaZero Load Pressure 12762 ft‐lbs 17302 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
600 gpm (2271 lpm)
450 gpm (1703 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
0
50
100
150
200
0 200 400 600 800 1000 1200 1400 1600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 88/113
Std Thrd
4.940 in 0.415 in 4.75 in 153.63 in 146.63 in 7.00 in 603 lbs
125.49 mm 10.55 mm 120.65 mm 3902 mm 3724 mm 178 mm 274 kg
* Alternate th
available
7.750 in 6.250 in 8.000 in 168.00 in 152.00 in 8.00 in 893 lbs
196.85 mm 158.75 mm 203.20 mm 4267 mm 3861 mm 203 mm 406 kg
US n/a n/a n/a n/a
STD 4.088 in 103.84 mm 0.021 in 0.54 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
34 psi 229 kpaZero Load Pressure 7659 ft‐lbs 10384 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5379 k
LENGTHS
Mass
Tube ID
0.26 rev/gal 0.07 rev/l
76 ‐ 226 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 780 psi
3586 k1136 ‐ 3407
5106 ft‐lbs 6923 nStd Elastomer Torque @ Max Pressure
775‐45‐367.3/4" 4:5 Lobe 3.6 Stage
520 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 89/113
Std Thrd
4.940 in 0.415 in 4.75 in 221.00 in 214.00 in 7.00 in 851 lbs
125.49 mm 10.55 mm 120.65 mm 5613 mm 5435 mm 178 mm 386 kg
* Alternate th
available
7.750 in 6.250 in 8.000 in 228.00 in 212.00 in 8.00 in 1212 lbs
196.85 mm 158.75 mm 203.20 mm 5791 mm 5385 mm 203 mm 550 kg
US n/a n/a n/a n/a
STD 4.090 in 103.89 mm 0.019 in 0.49 mm
OS n/a n/a n/a n/a
2OS 4.164 in 105.77 mm ‐0.055 in ‐1.39 mm
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
72 psi 494 kpaZero Load Pressure 10544 ft‐lbs 14296 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7758 k
LENGTHS
Mass
Tube ID
0.26 rev/gal 0.07 rev/l
77 ‐ 231 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 1125 psi
5172 k1136 ‐ 3407
7029 ft‐lbs 9531 nStd Elastomer Torque @ Max Pressure
775‐45‐537.3/4" 4:5 Lobe 5.3 Stage
750 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
0
50
100
150
200
250
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 90/113
Std Thrd
4.865 in 0.382 in 4.75 in 162.00 in 155.00 in 7.00 in 631 lbs
123.57 mm 9.69 mm 120.65 mm 4115 mm 3937 mm 178 mm 287 kg
* Alternate th
available
7.750 in 6.250 in 8.000 in 168.00 in 152.00 in 8.00 in 893 lbs
196.85 mm 158.75 mm 203.20 mm 4267 mm 3861 mm 203 mm 406 kg
US n/a n/a n/a n/a
STD 4.100 in 104.14 mm 0.002 in 0.04 mm
OS 4.115 in 104.52 mm ‐0.013 in ‐0.34 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
98 psi 675 kpaZero Load Pressure 8294 ft‐lbs 11246 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7240.5 k
LENGTHS
Mass
Tube ID
0.29 rev/gal 0.08 rev/l
143 ‐ 258 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 1050 psi
4827 k1893 ‐ 3407
5530 ft‐lbs 7497 nStd Elastomer Torque @ Max Pressure
775‐56‐507.3/4" 5:6 Lobe 5.0 Stage
700 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
500 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
700 gpm (2650 lpm)
500 gpm (1893 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
50
100
150
200
250
300
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 91/113
Std Thrd
4.958 in 0.336 in 4.75 in 199.00 in 192.00 in 7.00 in 834 lbs
125.94 mm 8.54 mm 120.65 mm 5055 mm 4877 mm 178 mm 379 kg
* Alternate th
available
7.750 in 6.250 in 8.000 in 206.00 in 190.00 in 8.00 in 1095 lbs
196.85 mm 158.75 mm 203.20 mm 5232 mm 4826 mm 203 mm 497 kg
US 4.268 in 108.40 mm 0.018 in 0.45 mm
STD 4.282 in 108.76 mm 0.004 in 0.09 mm
OS 4.312 in 109.53 mm ‐0.027 in ‐0.68 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
49 psi 333 kpaZero Load Pressure 11676 ft‐lbs 15830 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5844 k
LENGTHS
Mass
Tube ID
0.18 rev/gal 0.05 rev/l
54 ‐ 160 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 848 psi
3896 k1136 ‐ 3407
7784 ft‐lbs 10553 nStd Elastomer Torque @ Max Pressure
775‐67‐407.3/4" 6:7 Lobe 4.0 Stage
565 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700 800 900
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 92/113
Std Thrd
4.918 in 0.286 in 4.75 in 153.63 in 146.63 in 7.00 in 670 lbs
124.91 mm 7.27 mm 120.65 mm 3902 mm 3724 mm 178 mm 304 kg
* Alternate th
available
7.750 in 6.250 in 8.000 in 168.00 in 152.00 in 8.00 in 893 lbs
196.85 mm 158.75 mm 203.20 mm 4267 mm 3861 mm 203 mm 406 kg
US n/a n/a n/a n/a
STD 4.357 in 110.67 mm ‐0.012 in ‐0.31 mm
OS 4.378 in 111.21 mm ‐0.033 in ‐0.85 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
51 psi 350 kpaZero Load Pressure 9083 ft‐lbs 12314 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3051 k
LENGTHS
Mass
Tube ID
0.12 rev/gal 0.04 rev/l
36 ‐ 107 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 443 psi
2034 k1136 ‐ 3407
6055 ft‐lbs 8210 nStd Elastomer Torque @ Max Pressure
775‐78‐207.3/4" 7:8 Lobe 2.0 Stage
295 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
1000
0
20
40
60
80
100
120
0 50 100 150 200 250 300 350 400 450
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 93/113
Std Thrd
5.186 in 0.288 in 4.75 in 153.63 in 146.63 in 7.00 in 749 lbs
131.73 mm 7.33 mm 120.65 mm 3902 mm 3724 mm 178 mm 340 kg
* Alternate th
available
7.750 in 6.250 in 8.000 in 168.00 in 152.00 in 8.00 in 893 lbs
196.85 mm 158.75 mm 203.20 mm 4267 mm 3861 mm 203 mm 406 kg
US n/a n/a n/a n/a
STD 4.592 in 116.64 mm 0.017 in 0.43 mm
OS 4.633 in 117.68 mm ‐0.024 in ‐0.61 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
70 psi 479 kpaZero Load Pressure 9906 ft‐lbs 13431 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4758 k
LENGTHS
Mass
Tube ID
0.17 rev/gal 0.05 rev/l
51 ‐ 153 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 690 psi
3172 k1136 ‐ 3407
6604 ft‐lbs 8954 nStd Elastomer Torque @ Max Pressure
775‐78‐307.3/4" 7:8 Lobe 3.0 Stage
460 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
0.0000.0200.0400.0600.0800.1000.1200.140
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 94/113
Std Thrd
5.186 in 0.288 in 4.75 in 196.50 in 189.50 in 7.00 in 948 lbs
131.73 mm 7.33 mm 120.65 mm 4991 mm 4813 mm 178 mm 430 kg
* Alternate th
available
7.750 in 6.250 in 8.000 in 206.00 in 190.00 in 8.00 in 1095 lbs
196.85 mm 158.75 mm 203.20 mm 5232 mm 4826 mm 203 mm 497 kg
US n/a n/a n/a n/a
STD 4.592 in 116.64 mm 0.017 in 0.43 mm
OS 4.633 in 117.68 mm ‐0.024 in ‐0.61 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
76 psi 521 kpaZero Load Pressure 12501 ft‐lbs 16948 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5896.5 k
LENGTHS
Mass
Tube ID
0.17 rev/gal 0.05 rev/l
50 ‐ 149 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 855 psi
3931 k1136 ‐ 3407
8334 ft‐lbs 11299 nStd Elastomer Torque @ Max Pressure
775‐78‐407.3/4" 7:8 Lobe 4.0 Stage
570 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
1400
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700 800 900
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
0.0000.0200.0400.0600.0800.1000.1200.140
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 95/113
Std Thrd
4.940 in 0.415 in 4.75 in 153.63 in 146.63 in 7.00 in 603 lbs
125.49 mm 10.55 mm 120.65 mm 3902 mm 3724 mm 178 mm 274 kg
* Alternate th
available
8.000 in 6.250 in 7.750 in 168.00 in 152.00 in 8.00 in 1061 lbs
203.20 mm 158.75 mm 196.85 mm 4267 mm 3861 mm 203 mm 481 kg
US n/a n/a n/a n/a
STD 4.088 in 103.84 mm 0.021 in 0.54 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
34 psi 229 kpaZero Load Pressure 7659 ft‐lbs 10384 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5379 k
LENGTHS
Mass
Tube ID
0.26 rev/gal 0.07 rev/l
76 ‐ 226 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 780 psi
3586 k1136 ‐ 3407
5106 ft‐lbs 6923 nStd Elastomer Torque @ Max Pressure
800‐45‐368" 4:5 Lobe 3.6 Stage
520 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 96/113
Std Thrd
4.940 in 0.415 in 4.75 in 221.00 in 214.00 in 7.00 in 851 lbs
125.49 mm 10.55 mm 120.65 mm 5613 mm 5435 mm 178 mm 386 kg
* Alternate th
available
8.000 in 6.250 in 7.750 in 228.00 in 212.00 in 8.00 in 1440 lbs
203.20 mm 158.75 mm 196.85 mm 5791 mm 5385 mm 203 mm 653 kg
US n/a n/a n/a n/a
STD 4.090 in 103.89 mm 0.019 in 0.49 mm
OS n/a n/a n/a n/a
2OS 4.164 in 105.77 mm ‐0.055 in ‐1.39 mm
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
72 psi 494 kpaZero Load Pressure 10544 ft‐lbs 14296 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7758 k
LENGTHS
Mass
Tube ID
0.26 rev/gal 0.07 rev/l
77 ‐ 231 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 1125 psi
5172 k1136 ‐ 3407
7029 ft‐lbs 9531 nStd Elastomer Torque @ Max Pressure
800‐45‐538" 4:5 Lobe 5.3 Stage
750 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
0
50
100
150
200
250
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 97/113
Std Thrd
4.865 in 0.382 in 4.75 in 105.00 in 98.00 in 7.00 in 422 lbs
123.57 mm 9.69 mm 120.65 mm 2667 mm 2489 mm 178 mm 192 kg
* Alternate th
available
8.000 in 6.250 in n/a 111.63 in 95.63 in 8.00 in 705 lbs
203.20 mm 158.75 mm n/a 2835 mm 2429 mm 203 mm 320 kg
US n/a n/a n/a n/a
STD 4.100 in 104.14 mm 0.002 in 0.04 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
98 psi 675 kpaZero Load Pressure 5155 ft‐lbs 6989 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4500 k
LENGTHS
Mass
Tube ID
0.31 rev/gal 0.09 rev/l
155 ‐ 279 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 653 psi
3000 k1893 ‐ 3407
3437 ft‐lbs 4659 nStd Elastomer Torque @ Max Pressure
800‐56‐308" 5:6 Lobe 3.0 Stage
435 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
500 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
700 gpm (2650 lpm)
500 gpm (1893 lpm)
0
1000
2000
3000
4000
5000
0
50
100
150
200
250
300
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 98/113
Std Thrd
4.865 in 0.382 in 4.75 in 162.00 in 155.00 in 7.00 in 631 lbs
123.57 mm 9.69 mm 120.65 mm 4115 mm 3937 mm 178 mm 287 kg
* Alternate th
available
8.000 in 6.250 in 7.750 in 168.00 in 152.00 in 8.00 in 1061 lbs
203.20 mm 158.75 mm 196.85 mm 4267 mm 3861 mm 203 mm 481 kg
US n/a n/a n/a n/a
STD 4.100 in 104.14 mm 0.002 in 0.04 mm
OS 4.115 in 104.52 mm ‐0.013 in ‐0.34 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
98 psi 675 kpaZero Load Pressure 8294 ft‐lbs 11246 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7240.5 k
LENGTHS
Mass
Tube ID
0.29 rev/gal 0.08 rev/l
143 ‐ 258 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 1050 psi
4827 k1893 ‐ 3407
5530 ft‐lbs 7497 nStd Elastomer Torque @ Max Pressure
800‐56‐508" 5:6 Lobe 5.0 Stage
700 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
500 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
700 gpm (2650 lpm)
500 gpm (1893 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
50
100
150
200
250
300
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
0.000
0.010
0.020
0.030
0.040
0.050
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 99/113
Std Thrd
4.958 in 0.336 in 4.75 in 199.00 in 192.00 in 7.00 in 834 lbs
125.94 mm 8.54 mm 120.65 mm 5055 mm 4877 mm 178 mm 379 kg
* Alternate th
available
8.000 in 6.250 in 7.750 in 206.00 in 190.00 in 8.00 in 1301 lbs
203.20 mm 158.75 mm 196.85 mm 5232 mm 4826 mm 203 mm 590 kg
US 4.268 in 108.40 mm 0.018 in 0.45 mm
STD 4.282 in 108.76 mm 0.004 in 0.09 mm
OS 4.312 in 109.53 mm ‐0.027 in ‐0.68 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
49 psi 333 kpaZero Load Pressure 11676 ft‐lbs 15830 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5844 k
LENGTHS
Mass
Tube ID
0.18 rev/gal 0.05 rev/l
54 ‐ 160 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 848 psi
3896 k1136 ‐ 3407
7784 ft‐lbs 10553 nStd Elastomer Torque @ Max Pressure
800‐67‐408" 6:7 Lobe 4.0 Stage
565 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700 800 900
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 100/113
Std Thrd
4.958 in 0.336 in 4.75 in 244.00 in 237.00 in 7.00 in 1015 lbs
125.94 mm 8.54 mm 120.65 mm 6198 mm 6020 mm 178 mm 461 kg
* Alternate th
available
8.000 in 6.250 in n/a 250.00 in 234.00 in 8.00 in 1579 lbs
203.20 mm 158.75 mm n/a 6350 mm 5944 mm 203 mm 716 kg
US n/a n/a n/a n/a
STD 4.279 in 108.69 mm 0.006 in 0.16 mm
OS n/a n/a n/a n/a
2OS 4.346 in 110.40 mm ‐0.061 in ‐1.55 mm
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
64 psi 437 kpaZero Load Pressure 14428 ft‐lbs 19561 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7395 k
LENGTHS
Mass
Tube ID
0.18 rev/gal 0.05 rev/l
54 ‐ 160 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 1073 psi
4930 k1136 ‐ 3407
9619 ft‐lbs 13041 nStd Elastomer Torque @ Max Pressure
800‐67‐508" 6:7 Lobe 5.0 Stage
715 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
1400
1600
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 101/113
Std Thrd
4.918 in 0.286 in 4.75 in 153.63 in 146.63 in 7.00 in 670 lbs
124.91 mm 7.27 mm 120.65 mm 3902 mm 3724 mm 178 mm 304 kg
* Alternate th
available
8.000 in 6.250 in 7.750 in 168.00 in 152.00 in 8.00 in 1061 lbs
203.20 mm 158.75 mm 196.85 mm 4267 mm 3861 mm 203 mm 481 kg
US n/a n/a n/a n/a
STD 4.357 in 110.67 mm ‐0.012 in ‐0.31 mm
OS 4.378 in 111.21 mm ‐0.033 in ‐0.85 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
51 psi 350 kpaZero Load Pressure 9083 ft‐lbs 12314 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
3051 k
LENGTHS
Mass
Tube ID
0.12 rev/gal 0.04 rev/l
36 ‐ 107 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 443 psi
2034 k1136 ‐ 3407
6055 ft‐lbs 8210 nStd Elastomer Torque @ Max Pressure
800‐78‐208" 7:8 Lobe 2.0 Stage
295 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
1000
0
20
40
60
80
100
120
0 50 100 150 200 250 300 350 400 450
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
0.0000.0100.0200.0300.0400.0500.0600.070
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 102/113
Std Thrd
5.186 in 0.288 in 4.75 in 153.63 in 146.63 in 7.00 in 749 lbs
131.73 mm 7.33 mm 120.65 mm 3902 mm 3724 mm 178 mm 340 kg
* Alternate th
available
8.000 in 6.250 in 7.750 in 168.00 in 152.00 in 8.00 in 1061 lbs
203.20 mm 158.75 mm 196.85 mm 4267 mm 3861 mm 203 mm 481 kg
US n/a n/a n/a n/a
STD 4.592 in 116.64 mm 0.017 in 0.43 mm
OS 4.633 in 117.68 mm ‐0.024 in ‐0.61 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
70 psi 479 kpaZero Load Pressure 9906 ft‐lbs 13431 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4758 k
LENGTHS
Mass
Tube ID
0.17 rev/gal 0.05 rev/l
51 ‐ 153 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 690 psi
3172 k1136 ‐ 3407
6604 ft‐lbs 8954 nStd Elastomer Torque @ Max Pressure
800‐78‐308" 7:8 Lobe 3.0 Stage
460 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
0.0000.0200.0400.0600.0800.1000.1200.140
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 103/113
Std Thrd
5.186 in 0.288 in 4.75 in 196.50 in 189.50 in 7.00 in 948 lbs
131.73 mm 7.33 mm 120.65 mm 4991 mm 4813 mm 178 mm 430 kg
* Alternate th
available
8.000 in 6.250 in 7.750 in 206.00 in 190.00 in 8.00 in 1301 lbs
203.20 mm 158.75 mm 196.85 mm 5232 mm 4826 mm 203 mm 590 kg
US n/a n/a n/a n/a
STD 4.592 in 116.64 mm 0.017 in 0.43 mm
OS 4.633 in 117.68 mm ‐0.024 in ‐0.61 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
76 psi 521 kpaZero Load Pressure 12501 ft‐lbs 16948 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
3 ½" A
Flush B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5896.5 k
LENGTHS
Mass
Tube ID
0.17 rev/gal 0.05 rev/l
50 ‐ 149 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 855 psi
3931 k1136 ‐ 3407
8334 ft‐lbs 11299 nStd Elastomer Torque @ Max Pressure
800‐78‐408" 7:8 Lobe 4.0 Stage
570 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
300 ‐ 900 gpm
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
900 gpm (3407 lpm)
600 gpm (2271 lpm)
300 gpm (1136 lpm)
0
2000
4000
6000
8000
1000
1200
1400
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700 800 900
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
0.0000.0200.0400.0600.0800.1000.1200.140
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 104/113
Std Thrd
6.268 in 0.486 in 5.50 in 202.00 in 193.00 in 9.00 in 1299 lbs
159.21 mm 12.35 mm 139.70 mm 5131 mm 4902 mm 229 mm 590 kg
* Alternate th
available
9.625 in 7.875 in n/a 208.00 in 190.00 in 9.00 in 1613 lbs
244.48 mm 200.03 mm n/a 5283 mm 4826 mm 229 mm 732 kg
US n/a n/a n/a n/a
STD 5.296 in 134.52 mm ‐0.001 in ‐0.02 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
78 psi 534 kpaZero Load Pressure 8780 ft‐lbs 11904 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
4" API
Hole B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
10756.5
LENGTHS
Mass
Tube ID
0.5 rev/gal 0.13 rev/l
296 ‐ 591 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 1560 psi
7171 k2271 ‐ 4542
5854 ft‐lbs 7936 nStd Elastomer Torque @ Max Pressure
962‐23‐759.5/8" 2:3 Lobe 7.5 Stage
1040 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
600 ‐ 1200
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
1200 gpm (4542 lpm)
900 gpm (3407 lpm)
600 gpm (2271 lpm)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0
100
200
300
400
500
600
0 200 400 600 800 1000 1200 1400 1600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
5.0
0.000
0.050
0.100
0.150
0.200
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 105/113
Std Thrd
5.978 in 0.599 in 5.50 in 167.00 in 160.00 in 7.00 in 881 lbs
151.85 mm 15.23 mm 139.70 mm 4242 mm 4064 mm 178 mm 400 kg
* Alternate th
available
9.625 in 7.875 in n/a 178.00 in 160.00 in 9.00 in 1380 lbs
244.48 mm 200.03 mm n/a 4521 mm 4064 mm 229 mm 626 kg
US n/a n/a n/a n/a
STD 4.750 in 120.65 mm 0.029 in 0.74 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
34 psi 231 kpaZero Load Pressure 10776 ft‐lbs 14610 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
4" API
Hole B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
6361.5 k
LENGTHS
Mass
Tube ID
0.22 rev/gal 0.06 rev/l
131 ‐ 261 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 923 psi
4241 k2271 ‐ 4542
7184 ft‐lbs 9740 nStd Elastomer Torque @ Max Pressure
962‐34‐459.5/8" 3:4 Lobe 4.5 Stage
615 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
600 ‐ 1200
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
1200 gpm (4542 lpm)
900 gpm (3407 lpm)
600 gpm (2271 lpm)
0
2000
4000
6000
8000
1000
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800 900
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
5.0
0.000
0.050
0.100
0.150
0.200
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 106/113
Std Thrd
5.978 in 0.599 in 5.50 in 219.00 in 212.00 in 7.00 in 1141 lbs
151.85 mm 15.23 mm 139.70 mm 5563 mm 5385 mm 178 mm 518 kg
* Alternate th
available
9.625 in 7.875 in n/a 228.00 in 210.00 in 9.00 in 1768 lbs
244.48 mm 200.03 mm n/a 5791 mm 5334 mm 229 mm 802 kg
US n/a n/a n/a n/a
STD 4.750 in 120.65 mm 0.029 in 0.74 mm
OS 4.808 in 122.12 mm ‐0.029 in ‐0.73 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
113 psi 776 kpaZero Load Pressure 13273 ft‐lbs 17996 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
4" API
Hole B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
8584.5 k
LENGTHS
Mass
Tube ID
0.21 rev/gal 0.06 rev/l
126 ‐ 251 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 1245 psi
5723 k2271 ‐ 4542
8849 ft‐lbs 11998 nStd Elastomer Torque @ Max Pressure
962‐34‐609.5/8" 3:4 Lobe 6.0 Stage
830 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
600 ‐ 1200
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
1200 gpm (4542 lpm)
900 gpm (3407 lpm)
600 gpm (2271 lpm)
0
2000
4000
6000
8000
1000
1200
1400
0
50
100
150
200
250
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
5.0
0.000
0.050
0.100
0.150
0.200
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 107/113
Std Thrd
6.236 in 0.448 in 5.50 in 167.00 in 160.00 in 7.00 in 1089 lbs
158.40 mm 11.37 mm 139.70 mm 4242 mm 4064 mm 178 mm 494 kg
* Alternate th
available
9.625 in 7.875 in n/a 178.00 in 160.00 in 9.00 in 1380 lbs
244.48 mm 200.03 mm n/a 4521 mm 4064 mm 229 mm 626 kg
US n/a n/a n/a n/a
STD 5.323 in 135.20 mm 0.018 in 0.45 mm
OS 5.351 in 135.91 mm ‐0.010 in ‐0.26 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
37 psi 254 kpaZero Load Pressure 13483 ft‐lbs 18281 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
4" API
Hole B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
4240.5 k
LENGTHS
Mass
Tube ID
0.12 rev/gal 0.03 rev/l
67 ‐ 134 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 615 psi
2827 k2271 ‐ 4542
8989 ft‐lbs 12187 nStd Elastomer Torque @ Max Pressure
962‐56‐309.5/8" 5:6 Lobe 3.0 Stage
410 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
600 ‐ 1200
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
1200 gpm (4542 lpm)
900 gpm (3407 lpm)
600 gpm (2271 lpm)
0
2000
4000
6000
8000
1000
1200
1400
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 108/113
Std Thrd
6.176 in 0.450 in 5.50 in 219.50 in 212.50 in 7.00 in 1383 lbs
156.87 mm 11.43 mm 139.70 mm 5575 mm 5397 mm 178 mm 628 kg
* Alternate th
available
9.625 in 7.875 in n/a 228.00 in 210.00 in 9.00 in 1768 lbs
244.48 mm 200.03 mm n/a 5791 mm 5334 mm 229 mm 802 kg
US n/a n/a n/a n/a
STD 5.259 in 133.58 mm 0.017 in 0.43 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
44 psi 299 kpaZero Load Pressure 17799 ft‐lbs 24131 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
4" API
Hole B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5740.5 k
LENGTHS
Mass
Tube ID
0.11 rev/gal 0.03 rev/l
66 ‐ 132 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 833 psi
3827 k2271 ‐ 4542
11866 ft‐lbs 16088 nStd Elastomer Torque @ Max Pressure
962‐56‐409.5/8" 5:6 Lobe 4.0 Stage
555 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
600 ‐ 1200
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
1200 gpm (4542 lpm)
900 gpm (3407 lpm)
600 gpm (2271 lpm)
0
2000
4000
6000
8000
1000
1200
1400
1600
1800
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 109/113
Std Thrd
6.403 in 0.428 in 5.50 in 202.00 in 195.00 in 7.00 in 1406 lbs
162.65 mm 10.87 mm 139.70 mm 5131 mm 4953 mm 178 mm 638 kg
* Alternate th
available
9.625 in 7.875 in n/a 208.00 in 190.00 in 9.00 in 1613 lbs
244.48 mm 200.03 mm n/a 5283 mm 4826 mm 229 mm 732 kg
US n/a n/a n/a n/a
STD 5.544 in 140.82 mm 0.004 in 0.10 mm
OS 5.576 in 141.63 mm ‐0.028 in ‐0.71 mm
2OS n/a n/a n/a n/a
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
44 psi 303 kpaZero Load Pressure 19323 ft‐lbs 26198 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
4" API
Hole B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
7395 k
LENGTHS
Mass
Tube ID
0.13 rev/gal 0.04 rev/l
78 ‐ 156 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 1073 psi
4930 k2271 ‐ 4542
12882 ft‐lbs 17465 nStd Elastomer Torque @ Max Pressure
962‐67‐509.5/8" 6:7 Lobe 5.0 Stage
715 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
600 ‐ 1200
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
1200 gpm (4542 lpm)
900 gpm (3407 lpm)
600 gpm (2271 lpm)
0
5000
1000
1500
2000
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1000
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 110/113
Std Thrd
6.403 in 0.428 in 5.50 in 240.00 in 233.00 in 7.00 in 1662 lbs
162.65 mm 10.87 mm 139.70 mm 6096 mm 5918 mm 178 mm 754 kg
* Alternate th
available
9.625 in 7.875 in n/a 250.00 in 232.00 in 9.00 in 1938 lbs
244.48 mm 200.03 mm n/a 6350 mm 5893 mm 229 mm 880 kg
US n/a n/a n/a n/a
STD 5.544 in 140.82 mm 0.004 in 0.10 mm
OS 5.575 in 141.60 mm ‐0.027 in ‐0.68 mm
2OS 5.618 in 142.69 mm ‐0.070 in ‐1.77 mm
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
69 psi 469 kpaZero Load Pressure 23663 ft‐lbs 32082 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
Power Section Specificat
PowerPLUS™ Max ΔPressure
4" API
Hole B
CustomSpecif
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
9102 k
LENGTHS
Mass
Tube ID
0.13 rev/gal 0.04 rev/l
78 ‐ 155 rpm
Stator
Head LengthContour
Flow Range
Revs per Unit Volume
Speed (No Load) 1320 psi
6068 k2271 ‐ 4542
15775 ft‐lbs 21388 nStd Elastomer Torque @ Max Pressure
962‐67‐609.5/8" 6:7 Lobe 6.0 Stage
880 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
600 ‐ 1200
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
1200 gpm (4542 lpm)
900 gpm (3407 lpm)
600 gpm (2271 lpm)
0
5000
1000
1500
2000
2500
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1000 1200 1400
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 111/113
Std Thrd
6.968 in 0.697 in 6.50 in 192.50 in 182.50 in 10.00 in 1402 lbs
176.98 mm 17.70 mm 165.10 mm 4890 mm 4636 mm 254 mm 636 kg
* Alternate th
available
11.250 in 9.250 in n/a 205.00 in 184.00 in 10.50 in 2128 lbs
285.75 mm 234.95 mm n/a 5207 mm 4674 mm 267 mm 965 kg
US n/a n/a n/a n/a
STD 5.528 in 140.41 mm 0.046 in 1.16 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
1125‐34‐3611.1/4" 3:4 Lobe 3.6 Stage
505 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
900 ‐ 1500 Flow Range
Revs per Unit Volume
Speed (No Load) 758 psi
3482 k3407 ‐ 5678
12174 ft‐lbs 16506 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.12 rev/gal 0.04 rev/l
108 ‐ 179 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
5223 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
4 ½" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
79 psi 545 kpaZero Load Pressure 18261 ft‐lbs 24758 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
1500 gpm (5678 lpm)
1200 gpm (4542 lpm)
900 gpm (3407 lpm)
0
2000
4000
6000
8000
1000
1200
1400
1600
1800
2000
0
20
40
60
80
100
120
140
160
180
200
0 100 200 300 400 500 600 700 800
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
1.0
2.0
3.0
4.0
5.0
0.000
0.050
0.100
0.150
0.200
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 112/113
Std Thrd
7.682 in 0.487 in 6.50 in 240.00 in 230.00 in 10.00 in 2455 lbs
195.14 mm 12.37 mm 165.10 mm 6096 mm 5842 mm 254 mm 1114 kg
* Alternate th
available
11.250 in 9.250 in n/a 250.00 in 229.00 in 10.50 in 2595 lbs
285.75 mm 234.95 mm n/a 6350 mm 5817 mm 267 mm 1177 kg
US n/a n/a n/a n/a
STD 6.681 in 169.70 mm 0.027 in 0.69 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
Power Section above maximum recommended performance will reduc
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head OD
to change without notice. Performance curves based upon Dyno testing at 70°F (2
Actual field performance may vary with field operational conditions. Opera
Performance curves are for reference only. Performance data and dimensions su
Eccentricity
1125‐67‐5511.1/4" 6:7 Lobe 5.5 Stage
820 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
900 ‐ 1800 Flow Range
Revs per Unit Volume
Speed (No Load) 1230 psi
5654 k3407 ‐ 6814
19369 ft‐lbs 26261 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.09 rev/gal 0.03 rev/l
81 ‐ 162 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
8481 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
4 ½" A
Regula
CustomSpecif
©2009 NOV. All rights reserved. Except as noted, all
trademarks referenced in this document are
trademarks of NOV.
79 psi 545 kpaZero Load Pressure 29053 ft‐lbs 39391 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
1800 gpm (6814 lpm)
1350 gpm (5110 lpm)
900 gpm (3407 lpm)
0
5000
1000
1500
2000
2500
3000
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1000 1200
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
O u t p u t S p e e d ( r p m )
Differential Operating Pressure (psi)
Std Elastomer
PowerPLUS™
Std Elastomer
Full Load
PowerPLUS™
Full Load
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
IssuLatest REVC Number: D340000-0-F-OM006-SPC-001 Printed REV: 01
Printed On: 2014.01.15.22.4rinted By: tripathidk
8/21/2019 Powerplus performance specs.pdf
http://slidepdf.com/reader/full/powerplus-performance-specspdf 113/113
Std Thrd
7.612 in 0.506 in 6.50 in 242.00 in 232.50 in 9.50 in 2393 lbs
193.34 mm 12.87 mm 165.10 mm 6147 mm 5906 mm 241 mm 1086 kg
* Alternate th
available
11.250 in 9.250 in n/a 250.00 in 229.00 in 10.50 in 2257 lbs
285.75 mm 234.95 mm n/a 6350 mm 5817 mm 267 mm 1024 kg
US n/a n/a n/a n/a
STD 6.590 in 167.39 mm 0.008 in 0.22 mm
OS n/a n/a n/a n/a
2OS n/a n/a n/a n/a
Rotor
MassTube OD
Stator Minor Ø
Std Rubber
Cutback
Alternative Tube
OD
FIT INFORMATION for all ELASTOMERS
Nominal Fit at 70°F (21°C)
Head ODEccentricity
1125‐67‐5611.1/4" 6:7 Lobe 5.6 Stage
820 psi
DIAMETERS
Contour OD
GENERAL
Overall
RECOMMENDED OPERATING LIMITS
1000 ‐ 1800 Flow Range
Revs per Unit Volume
Speed (No Load) 1230 psi
5654 k3785 ‐ 6814
19377 ft‐lbs 26272 nStd Elastomer Torque @ Max Pressure
LENGTHS
Mass
Tube ID
0.09 rev/gal 0.03 rev/l
90 ‐ 162 rpm
Stator
Head LengthContour
Std Elastomer Max ΔPressure
PERFORMANCE OUTPUT
8481 k
Power Section Specificat
PowerPLUS™ Max ΔPressure
4 ½" A
Regula
CustomSpecif
88 psi 606 kpaZero Load Pressure 29065 ft‐lbs 39407 nPowerPLUS™ Torque @ Max Pressure
Overall Contour
1800 gpm (6814 lpm)
2500
3000
140
160
180
Theoretical
Performance
Curve
[water
@
70°F
(21°C)]
0.0
0.5
1.0
1.5
2.0
2.5
0.000
0.020
0.040
0.060
0.080
0.100
0 100 200 300
Fit Change per Change in (°F) for all Elastomers
i n c h
Temperature Change (°F)
Printed On: 2014.01.15.22.4rinted By: tripathidk