bluesea.com 106 CONNECTORS AND INSULATORS

PowerBar 1000 - 1000A Common BusBarComplex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a busbar with various size studs and screws to connect conductors and fuse blocks. • For large complex wiring systems• Tin-plated pure electrical copper for maximum conductivity• Stepped bus design offers two elevations for conductors which doubles

the density of the wire loom compared to traditional bus bars• Busbar and fuse block elevations match common fuse blocks allowing for

multiple fuse block attachment, eliminating the need for connecting cables• One-piece serrated flange nuts ensure correct and secure connections• Stainless steel 8-32 screws with captive lock washers for securing

smaller gauge wires• Busbar may be cut to a shorter length to accommodate constricted spaces• Bi-directional busbar end caps allow the ganging of additional busbars• Snap on insulating cover meets ABYC and USCG requirements and includes

label recess • Models available to accommodate either 3/8" or 5/16" terminals

Part # Cover Terminal Studs Terminal Screws1990 Yes 8 × 3/8"-16 5 x #10-32, 11 x #8-32

1991 Yes 12 × 3/8"-16 5 x #10-32, 11 x #8-32

1992 Yes 8 × 5/16"-18 5 x #10-32, 11 x #8-32

1993 Yes 12 × 5/16"-18 5 x #10-32, 11 x #8-32

2730B PowerBar 1990 and 1992 Cover –– ––

2731B PowerBar 1991 and 1993 Cover –– ––

1990

1991

ANL Fuse Block page 71

Related Products

Safety AMI/MIDI Fuse Block

page 72

Terminal (MRBF) Fuse Block

page 70

Part # Terminal Studs

Terminal Screws

[A] Length in (mm)

[B] MountingCenters in (mm)

2104 4 × 3 / 8" -16 4 x #8-32 7.0 (177.8) 6.25 (158.74)

2107 8 × 3 / 8" -16 4 x #8-32 11.375 (288.93) 10.375 (263.53)

2708 Cover For 2104

PowerBar - 600A Common BusBarsHigh amperage BusBar with 3/8" terminal studs

2104

2107

2708

Related Products

MaxiBus Cover 2718 page 104

bluesea.com/video

[A][B]

1.25" (31.75mm)Typical

2.00" 50.80mm

1.3" 33.02mm

2.00" 50.8mm

CLEARANCE & COUNTERBORE FOR

#10 SCREWS 4 PLCS

1.32" 33.53mm

.5" 12.7mm

Continuous Rating 545A AC / 600A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Hardware #10 (M5) Screws

Bus Material Tin-Plated Copper C11000

Regulatory CE certified

Continuous Rating 1000A

Voltage Max. Operating 150V AC / 48V DC

Mounting Hardware #10 (M5) Screws

Bus Material Tin-Plated Copper C11000