PORTAL – Proficiency Online Reporting and Trend Analysis Secure web based reporting for all LGC PT...

PORTAL – Proficiency Online Reporting and Trend Analysis

Secure web based reporting for all LGC PT schemes

Introduction

This presentation demonstrates the use of PORTAL and provides guidance on

the terminology used throughout.

• The benefits of PORTAL

• Getting started

• User management

• Results submission

• Nominated results

• Committing results

• Reports

• Trend analysis

The benefits of PORTAL

• Standardised web based reporting across all LGC PT schemes.

• Secure and online 24 hours a day, everyday.

• Fast access to results submission, reports and interactive trending tools.

• A user management system that ensures complete data traceability.

• Full support provided by helpful LGC Standards staff in the UK or your local area.

• Flexible operation that can be adapted to the way your laboratory functions.

• Ability to report multiple results per analyte giving the opportunity to compare analysts, methods or instruments.

• Choose to enter results by entire sample or individual analyte.

• Intelligent importing of previously entered data.

• Full control of submitted results prior to deadlines.

• Multiple report types including detailed and concise options.

• Methodology summaries provided throughout.

• Ability to extract report data into Excel format.

• All reports are stored in a secure online area.

• Customisable trend analysis.

Getting started

• After receiving the samples you have ordered, you will find a PORTAL registration form within the sample package.

• The registration form is specific to each scheme as identified by the verification data.

These details are required to create your account on PORTAL. Please keep them safe.

• The verification data also provides your unique Lab ID number for this scheme and the e-mail address of your main laboratory contact (as supplied when you ordered the samples).

Getting startedImportant information

• Only the main laboratory contact, as stated on the PORTAL registration form, can create an account.

• The main laboratory contact is the person that LGC deems responsible for each PT scheme within your organisation.

• After creating their account this person becomes the ‘Administrator’ of this scheme for your laboratory.

• Only the administrator can create additional user accounts. This ensures that only authorised members of staff are able to access your data.

• It is possible to create additional administrators, this process is explained in further detail later.

Getting startedCreating your account

1. To create your PORTAL account select ‘I don’t have an account.

2. Complete the registration form as shown.

3. The Lab ID and E-mail address must match the verification data on your registration form.

4. Please choose all other details yourself.

5. The initials are used to denote the results from this user in the individual report. They can be anything you like but are fixed to 4 characters in length.

6. Click ‘Create Account’ to complete the process.

Getting startedRegional configuration

• The first time any user logs into PORTAL they are required to set their regional configuration.

• Select your number format.

• Reports will always be displayed in UK format i.e. Option 1.

• Whenever you submit data you should use the format selected here.

Getting startedRegional configuration continued

• You should also set your time zone. This ensures PORTAL functions correctly in your country.

Getting startedRegional configuration continued

• Select ‘Save’ when you have finished setting up your regional configuration.

Thank you!

• You have now completed the ‘Getting started’ section.

• On completion of this section you will have created your account on PORTAL.

User management

• In this section you will learn:

– How to make the best use of PORTAL within your organisation;

– How to create additional user accounts;

– The difference between an administrator and an analyst;

– How to add additional schemes to your existing account.

User managementMaking the best use of PORTAL

• After logging in and setting your regional configuration you will now have full access to PORTAL.

• We recommend, before submitting your results, that you take a moment to decide how to make the best use of PORTAL within your organisation.

User managementMaking the best use of PORTAL continued

• The way you use PORTAL depends on how your laboratory functions and what you want to gain from your PT results.

• PORTAL is flexible in its operation but there are essentially two options.

Option 1. An administrator submits results on behalf of each analyst.

Option 2. Each analyst submits their own results.

• You can begin submitting results with a single account, however this analyst’s name will be sent with all results.

• If you want to record different analyst’s names with your results, you will need to create additional accounts for each potential analyst.

User management Recording an analyst’s name

• If you want to record different analysts names with your results, you will need to create an account for each new analyst.

• You may be thinking…

“Why do I have to create a user account?”

Creating an account for each analyst allows us to easily identify their results which enables trending and traceability.

“Why can’t I just manually type the name of the analyst in each round?”

Each new account is given a unique ID number. The unique ID number is recorded against each result providing a more robust system than simply typing a name. Manual entries can be inconsistent, for example,

Round 1: Susan | Round 2: Sue | Round 3: SM

therefore it is difficult to assume this is the same person.

User management Creating users

1. To begin creating user accounts you should log into PORTAL and select ‘Manage Users’.

2. Now select the scheme that you would like to create user accounts for and press go.

3. You will now see your user account listed.

User managementCreating users continued

1. To create a new user select ‘Create a new user’.

2. Complete the new user account form choosing all the details yourself.

3. Choose a username and password.

(This must be set even if the user will never log into PORTAL).

4. Set a permission level for this user.(Adminstrator or analyst. See the next slide).

5. Click ‘Create Account’ to complete the process.

• What is the difference between administrator and analyst permissions?

• Administrator permission– The administrator can submit, view and trend results in their own name and on

behalf of any other analyst.– If one member of staff submits results for all analysts they need to be an

administrator.– If the member of staff is allowed to see other results from within your laboratory

they should be setup as an administrator.– You can have as many administrators as you like.

• Analyst permission– The analyst can only submit, view and trend results in their own name.– They can submit results on behalf of the laboratory but an administrator must

review and commit them.– If the member of staff is not allowed to see other results from within your

laboratory they should be setup as an analyst.– You can have as many analysts as you like.

• Once you have created your new user account it will appear in the list.

• Continue adding each new user account until all of your potential analysts have been created.

• User accounts can also be created for any other members of staff that may need to access results or reports, for example, QA Manager, Technical Manager etc.

• There is no limit to the number of users you can have.

User managementManaging users

• To edit a users details select ‘Edit Details’.

User managementManaging users continued

• Then choose between ‘Edit Details’, ‘Change Password’ and ‘Change Permission’.

User managementAdding schemes to an existing account

• If you purchase samples for a new scheme but are already an existing user of PORTAL, you don’t have to create a new account.

1. Log into PORTAL with your existing account details.

2. Select ‘My Schemes’.

3. Enter the verification data as shown on the registration form received for the new scheme.

4. Click add scheme to complete the process.

User management Adding schemes to an existing account continued

• You will now have access to the new scheme.

User managementAdding existing users to a new scheme

• Once you have added a new scheme you will need to setup any user accounts that require access to it.

• If a user account already exists on another scheme in PORTAL, it can easily be added to the new scheme.

1. Select ‘Manage Users’.

2. Select the new scheme and press ‘Go’.

User managementAdding existing users to a new scheme continued

1. Select ‘Add an existing user to scheme’.

2. Select the drop down list of names and you will see all the user accounts that have been setup on other schemes.

3. Select a permission level for the user. (The permission level only applies to this scheme. It’s possible to be administrator for one scheme and only an analyst for another).

4. Select ‘Add an existing user to scheme’.

User managementAdding existing users to a new scheme continued

• The user will now have been added to the scheme.

• The next time this user logs into PORTAL they will have access to both schemes.

• This process can be continued until all of your users have been given access and then you can begin the results submission process.

Thank you!

• You have now completed the ‘User management’ section.

• On completion of this section you will have– Decided how to make the best use of PORTAL;

– Setup any additional user accounts that you require;

– Added any additional schemes that you participate in.

Results submission

– The results submission process;

– How to submit results for an entire sample;

– How to submit results for an individual analyte;

– Why we use a single nominated result;

– How to review your submitted results;

– How to commit your results.

The results submission process

• There are 5 important steps that will ensure your results are submitted correctly.

1. Enter your results.2. Nominate at least one result for each analyte. (See later slides for further detail).

3. Save you results.

4. Ensure you review the submitted results.

5. Commit your results to finish.

Results submission

• To begin submitting results select ‘Submit Results’ from the menu bar.

Results submission

• You will now see the scheme selection page. Each scheme that your organisation participates in is shown here.

• Each round is displayed here.

= Results submission is open.

= Results submission is closed.

• Scheme Name / Round Number.

• Round start date / Deadline for results submission.

Results submission continued

• Select ‘Enter Results’ next to the scheme and the round of your choice.

• If you cannot access the scheme you require and you are the main laboratory contact for this scheme, you can add your permission via the ‘My Schemes’ section.

• If you are not the main laboratory contact for this scheme, please speak to your administrator to be granted access.

Results submission continued

• You will now be taken to the analyte selection page.

• Sample nameClick any sample name to enter results for the entire sample.

• Analyte nameClick any analyte name to enter results for the individual analyte.

• Colour coding is used to indicate a results status.

No result submittedResult entered Result committed

Results submissionSample results entry

• Enables you to see all the analytes that belong to a sample on one page.

• This option is recommended if you enter a single result per analyst.

• Click on any sample name to access the sample results entry page.

Results submissionSample results entry continued

• Select the analyst that the result belongs to or select ‘Lab Result’ if it’s for the whole laboratory.

• Now select ‘Go’.

• If ‘Import previous round data’ is checked, any previously submitted data for this analyte will populate in the grid.

• Method, Unit, Nomination status and comments will all be imported.

• Selecting any analyte name will move you into the results entry page for the individual analyte.

• This is useful if you have a second result by the same analyst.

• Enter the method you have used.• If you select ‘Other’ please give details about the method in the comments section.

• Enter your result (Required field)

• Enter your uncertainty (This is an optional field but you are strongly encouraged to provide this value).

• If you enter the standard measurement uncertainty, it should be expressed as an absolute value for the result entered.

• For microbiology schemes please enter as a log10 value.

• Enter an analysis date (Optional field)

• Set the nomination status

• Why do we use a single nominated result?

• The requirement for only a single result per laboratory to be included in the statistical analysis of results has been made in accordance with the international standard ISO 13528, and supported by the United Kingdom Accreditation Service (UKAS) in our recent audit .

• Nominated results have been introduced to prevent potential bias in results.

• If all results contributed to the overall statistics there is a small risk that the data may be skewed and the assigned value affected.

• All LGC PT schemes provide the opportunity to enter up to 13 results per analyte.

• For each analyte we allow you to nominate 1 result per method, for a maximum of 3 methods.

• In addition we allow a further 10 results that are not nominated. These can be used to compare additional analysts, methods or instruments.

• What would happen if you didn’t nominate a result?If you did not nominate a result your laboratory would not appear in the main report and your result would not contribute to the statistical analysis.

You would still receive z-scores for the non-nominated results submitted, based on the stats of the main report and you would be able to see your results in the individual report.

• Which result should be nominated?This choice is completely up to you. Our recommendation is that you nominate the result that best reflects the result you would supply for any normal routine sample.

• Can we automatically average your results and then nominate the average?Our recommendation is that laboratories should treat the samples in the same way as they would any routine sample. Routine samples are not normally analysed multiple times and an average result calculated. For this reason we do not automatically calculate an average of your results.

The choice of which results to submit and of these results which should be nominated is the decision of the participant.

• If you need any further advice please contact support@lgcpt.com or your local LGC representative.

• Enter an analysis date (Optional field)

• Set the nomination status

• Enter any comments

Results submission Sample results entry continued

• If you do not submit a result for a certain analyte please leave the row blank.• If the row is not blank you can select ‘Clear Row’.

• If you do not submit a result for a certain analyte please leave the row blank.

• If the row is not blank you can select ‘Clear Row’

• After entering all your results for this sample click the save button.

• Navigate to the next sample or results summary using the links provided.

• If a problem has been encountered when saving the result hover your mouse over the field highlighted in red to find out the cause.

• After you have corrected the problem please select ‘Save’.

Results submissionAnalyte results entry

• Enables you to enter multiple results for a single analyte.

• This option is recommended if you enter multiple results per analyte, using the same analyst name.

• Click on any analyte name to access the analyte results entry page.

Results submission - Analyte results entry continued

• Default values will already be in place when the analyte entry page opens

Results submissionAnalyte results entry continued

• If ‘Import previous round data’ is checked, any previously submitted data for this analyte will already be populated.

• Analyst, Method, Unit, Nomination status and comments will all be imported.

• Enter the analyst name or select ‘Lab result’ if it’s for the whole laboratory.

• Enter the method

• Enter your result

• Select the units you have used from the drop down list.

• If you enter the standard measurement uncertainty, it should be expressed as an absolute value for the result entered.

• For microbiology schemes please enter as a log10 value.

• This is an optional field but you are strongly encouraged to provide this value.

• Enter the analysis date.• This is an optional field.

• Set the nomination status.