Post on 15-Jun-2022
CHAMFERINGPORTABLECHAMFERING TOOLS HAND BEVELER/MINI BEVELER
XChamfer
YStraight
HB-15B
• Ideal for plate, pipe, and tube beveling for welding preparation• Uses easy-to-replace indexable inserts• Indexable inserts have four working edges for good economy• Finishes a surface so fine that post-sanding is unnecessary• Column R-section can be chamfered with optional attachment• High speed cutting action minimizes material hardening
Chamfering up to 15C
Accessories Included• 4 mm Hex. Socket Screw Key• 5 mm Hex. Socket Screw Key• 6 mm Hex. Socket Screw Key• Spanner 24 × 27• Hook Spanner 25 – 28• 3 mm T Wrench Key• 1 set (12 pieces/set) of TA9A093 Indexable Insert 12.7 sq.
Optional accessories• TA9A728 Pipe Plate Ass’y Capacity 125 to 800 mm O.D.
Model
Accessories Included• 3 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key• Spanner T-9F
Optional accessories• TA9A386 Indexable Insert 9.525 (10 pcs./set)• TA9A592 Indexable Insert 9.525 2R (10 pcs./set)• TA9A638 Indexable Insert 9.525 3R (10 pcs./set)• TA9A594 Inner Head Ass'y
• An outer R-part attachment allows chamfering of outer diameters with a radius greater than 170 mm
• An optional inner head ass'y allows chamfering a pipe of inner diameter larger than 100 mm (50R)
Handy Electric Chamfering Tool
MB-03A Double insulation
3C3R
Model
278 mm
150 mm
108 mm
220 mm
295 mm295 mm
HAND BEVELER
MINI BEVELER
SpecificationsModel
Power Supply (Single phase)
Rated Power Consumption
Rated Current
Chamfering Capacity(Mild Steel)
Chamfer Angle
Rated Revolutions
Mass (Weight)
MB-03A
430
2 / 4.5
Up to 3 mm Chamfer or 2 mmand 3 mm Radius
45˚
7,100
2.5
W
A
min-1(rpm)
kg
XChamfer
YStraight45˚
30˚15˚
X1594
Y15
15.515.4
HB-15BMild Steel(mm)
ChamferAngle
Chamfer angle and width
Mild Steel
Model
Power Source (Single phase)
Rated Power Consumption
Rated Current
No-load Speed
Chamfering Capacity (Mild Steel)
Chamfer Angle
Mass (Weight)
Specifications
WA
min-1(rpm)
kg
115 V AC, 50/60 Hz91010.53,340
230 V AC, 50/60 Hz910
42,750
115 V AC, 50/60 Hz 230 V AC, 50/60 Hz
HB-15B
0C - 15C15˚ - 45˚
14
Chamfer angle, width and radius
45˚
X
3
Y
3
MB-03A
Mild Steel(mm)ChamferAngle
Round
RadiusModel
Material
Radius(mm)
MB-03A
Mild Steel
2, 3
15CMild Steel
Chamfering I-beamsChamfering I-beamsChamfering steel platesChamfering steel plates
Compact and light for speed chamfering
21
CHAMFERINGPORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER
XChamfer
YStraight
XChamfer
YStraight
ModelHandy Electric Chamfering Tool
EMB-0307B
3C
7C4R
4R
Stainless Steel
Mild Steel
316.4 mm
179 mm
189.6 mm
MINI BEVELER
Accessories Included• Indexable Insert with Hole 12.7• Indexable Insert Set Screw• 5 mm Hex. Socket Screw Key• Spanner 8 × 10• Spanner T-15D
• Sub Handle• Grip Guard• Ball Bearing 687zz• Gauge C3
ECB-0203Electric Radial Chamfering Tool
Smoothly chamfering straight and curved edges • Designed to bevel stainless and mild steel• Minimum chamfering plate thickness is 2 mm (Max. 0.5 mm
Chamfer)• Indexable inserts have four working edges for good economy• An optional straight plate allows chamfering a straight edge
shoulder
*: In case of 3 mm Radius, an optional indexable insert for 3R is necessary, and 2 mm Radius, an optional guide sleeve 24 mm dia. and indexable insert for 2R are necessary.
1.5C2R
Stainless Steel
3C3R
Mild Steel
Model
Chamfering straight edges Chamfering curved edges
136 mm
400 mm
Accessories Included• Carbon Brush Ass'y• 4 mm Hex. Wrench Key• Indexable Insert with Hole 12.7• Indexable Insert Set Screw 4 × 7• Dust Box Ass'y
• 2 pieces of Hex. Nut M8• 2 pieces of 8 x 25 mm Hex. Socket Set Screw• Spanner T-15D• 3 pieces of Pan Head Screw 5 × 10
Specifications
• Ideal for edge beveling pipe, tube, and plate• Designed to bevel stainless and mild steel• Adjustable to bevel angles 15°- 45°• Bevel width up to 7 mm on mild steel.• Uses indexable carbide inserts• Swarf and chip collection box included
Model
Power Supply
Rated Power Consumption
Rated Current
Rated Duty
No-load Speed
Chamfer Angle
Power Cord Length
Mass (Weight)
EMB-0307B
220 V - 240 V AC, 50/60 Hz
1010
4.6
Continuous
11,000
Up to 7 mm Chamfer or 2, 3, 4 mm Radius
Up to 3 mm Chamfer or 2, 3, 4 mm Radius
15 – 45 Degrees
4.0
3.9
CIRCUIT BEVELER Double insulation
Double insulation
W
A
min-1(rpm)
m
kg
Mild Steel
Stainless Steel
SpecificationsECB-0203
220 V - 240 V AC, 50/60 Hz45030
11,000Up to 3 mm Chamfer or 2* and 3* mm RadiusUp to 1.5 mm Chamfer or 2* mm Radius
45˚2.52.5
W
min
min-1(rpm)
m
kg
ChamferingCapacity
Mild Steel
Stainless Steel
Model
Power Supply
Rated Power Consumption
Rated Duty
No-load Speed
Chamfer Angle
Power Cord Length
Mass (Weight)
Round
RadiusModel
Material
Radius(mm)
Mild Steel
2, 3, 4
EMB-0307B
StainlessSteel
2, 3, 4
Chamfer angle, width and radius
45˚30˚15˚
X7
3.81.5
Y7
6.65.6
X3
2.21
Y3
3.83.8
EMB-0307BChamferAngle
Mild Steel(mm)Stainless Steel(mm)
Chamfering range of operationMin. Diameter Min. Radius Min. Depth Min. Thickness
45˚
X
3
Y
3
X
1.5
Y
1.5
ECB-0203ChamferAngle
Chamfer angle, width and radius
MildSteel(mm)
StailessSteel Round
RadiusModel
Material
Radius(mm)
Mild Steel
2, 3
StainlessSteel
2
ECB-0203
ChamferingCapacity
22
PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER
XChamfer
YStraight
Round
Radius
Optional accessories• TB09097 Indexable Insert 8.4 for mild steel (10 pcs./set)• TB09338 Indexable Insert 8.4 for stainless steel (10 pcs./set)• TB09140 Guide plate 78 Assembly• TB09143 Plate Assembly for straight edge use *Requires use of TB09140 Guide Plate 78 Assembly
Accessories Included• 2 pieces of indexable insert set screw (a back up supply)• Hex key 2 for chamfering adjustments• T-6F wrench for cutter set screw• Bushing R 1/4 × NPT 1/4
1C
64 mm
106 mm
Pneumatic Chamfering ToolLever Type Ring Type
AMB-0307AMBL-0307
Accessories Included• 3 mm Hex. Socket Screw key• 4 mm Hex. Socket Screw key• Spanner T-15F• 2 pieces of Hex. nut M8
• Bushing R 3/8 × NPT 3/8• 2 pieces of 8 × 25 Hex. Socket Set Screw• Indexable Insert Set Screw 4 × 7• Indexable Insert
3C 4RStainless Steel
7C 4RMild Steel Specifications
AMBL-0307, AMB-0307
Mild Steel
Stainless Steel
MPa {kgf/cm2}
m3/min
min-1 (rpm)
kg
202 mm
126 mm
180 mm
AMB-0307
177 mm
126 mm
180 mm
AMBL-0307
MINI BEVELER
Model
Air Pressure
Air Consumption (No load)
Free Speed
Chamfer Angle
Mass (Weight)
Specifications
MPa {kgf/cm2}
m3/min
min-1
kg
Model
Air Pressure
Air Consumption
Free Speed
ChamferingCapacity
Chamfer Angle
Mass (Weight)
CB-01
Model
Material
Radius (mm)
Mild Steel
2, 3, 4
AMBL-0307/AMB-0307
StainlessSteel
2, 3, 4
Chamfer angle, width and radius
45˚30˚15˚
X74
2.2
Y778
X3
2.21
Y3
3.83.8
Mild Steel (mm)ChamferAngle
Stainless Steel (mm)AMBL-0307/AMB-0307
XChamfer
YStraight
45˚
X
1
Y
1
CB-01
Mild Steel (mm)ChamferAngle
Chamfer angle, width and radius
Mild Steel
Chamfering Capacity
CB-01Pneumatic Radial Chamfering Tool
Ideally suited for chamfering machine and mold component parts
ModelCIRCUIT BEVELER
Chamfering range of operationMin. Diameter
6.8m
m6.8
mm
Min. Radius
3mm
Min. Depth
6mm
0.6 {6}
0.15
28,000
Up to 1 mm Chamfer
Up to 0.5 mm Chamfer
45˚
0.5
0.6 {6}
0.9
14,000
Up to 7 mm Chamfer or 2 mm, 3 mm, 4 mm Radius
Up to 3 mm Chamfer or 2 mm, 3 mm, 4 mm Radius
15˚ - 45˚
2.9
CHAMFERING
・Lightweight design for portable edge beveling applications・Ideal for beveling plate, pipe, tube and other
profiles・Designed to bevel stainless and carbon steels・Adjustable to bevel angles from 15°- 45°・300 mm minimum radius bend・Bevel width up to 7 mm at 45°・Uses indexable carbide inserts
Features
• Only requires a 6.8 mm diameter hole for chamfering
• Two 3-sided indexable inserts provide a cost effective way to get a smooth, chatter free finish
Features
Mild Steel
Stainless Steel
23
CHAMFERINGPORTABLECHAMFERING TOOLS CIRCUIT BEVELER
XChamfer
YStraight
CB-02Pneumatic Radial Chamfering Tool
Optional Accessories• TA9A386 : Indexable Insert 9.525 (10 pcs./set)• TA9A592 : Indexable insert 9.525 R2 (10 pcs./set)
Accessories Included• Indexable Insert• Adjustment gauge• Spanner T-9F
• Protective cap• Hook Spanner 58-62• Bushing R 1/4 × NPT 1/4
Specifications
2C
2R
Model
116 mm
136 mm
CIRCUIT BEVELER
CBR-03Pneumatic Radial Chamfering Tool
For Bridge and Shipbuilding Applications
ModelCIRCUIT BEVELER
Chamfering range of operation
Min. Diameter Min. Radius Min. Depth
45˚
X
2
Y
2
CB-02
Mild Steel (mm)ChamferAngle
Round
RadiusModel
Material
Radius (mm)
CB-02
Mild Steel
2
Chamfer angle, width and radius
Mild Steel
Shipbuilding
Bridge• Radius chamfering on the scallop parts or holes of
bridge members
• Meets or exceeds PSPC* requirements on surface preparation of steel materials prior to coating
• Radius chamfering on steel materials used in seawater ballast tanks and double-side skin bulk carrier production
• Dual cutting head with 4 radius surfaces per tip and a quick-change base
* PSPC stands for Performance Standard for Protective Coatings regulated by International Marine Organization.
Accessories Included• 2 pieces of indexable insert (installed)• Torx Driver
Specifications
MPa {kgf/cm2}
m3/min
min-1
mm
kg
Model
Air Pressure
Air Consumption (No load)
Free Speed
Chamfering Capacity
Chamfer Angle
Mass (Weight)
CBR-03
0.6 {6}
0.65
12,000
3 mm Radius
45˚
2.2 (including hose)
MPa {kgf/cm2}
m3/min
min-1 (rpm)
kg
Model
Air Pressure
Air Consumption(No load)
Free Speed
Chamfering Capacity
Chamfer Angle
Mass (Weight)
CB-02
0.6 {6}
0.4
13,000
Up to 2mm Chamfer or 2 mm Radius
45˚
1.8
Round
RadiusModel
Material
Radius (mm)
CBR-03
Mild Steel
3
Chamfer radiusChamfering range of operation
Min. Diameter Min. Radius Min. Depth
22m
m22
mm 11mm
9mm
81 mm
117 mm
・Uniquely designed to bevel circular, elliptical and straight line profiles・Bevels exterior and/or interior edges・Depth gauge provided to accurately set
bevel widths
Features
3RSteel
• Insert Setscrew• Handle
24
OptionalAccessories for SPRING BALANCERHAND BEVELER / MINI BEVELER
/ CIRCUIT BEVELER
TB09097
TB09338
TA9A093
TB01159
TB01791
TB01651
TB01790
TB09018
TA9A386
TA9A592
TA9A638
TB09143
TB09140
TA9A728
TB02539
TA9A594
TB02857
TB03097
TB02862
TB03424
TQ01683
Indexable Insert 8.4
Indexable Insert 8.4 for Stainless Steel
Indexable Insert 12.7
Indexable Insert 12.7 with hole
Indexable Insert 12.7 R2
Indexable Insert 12.7 R3
Indexable Insert 12.7 R4
Indexable Insert 12.7 R3
Indexable Insert 9.525
Indexable Insert 9.525 R2
Indexable Insert 9.525 R3
Plate Assembly for Straight Edge Use
Guide Plate 78 Assembly
Plate Assembly for Pipe
Attachment for Small Dia. Pipe
Inner Head Assembly
Guide sleeve 24 mm dia. Assembly
Plate Assembly for Straight Line Use
Dust Box Assembly
Spanner T-9D
Spanner T-15D
10 pcs./set
10 pcs./set
12 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
1 set
1 set
1 set
1 set
1 set
1 set
1 set
1 set
1 pc.
1 pc.
CB-01
CB-01
HB-15B
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
EMB-0307B, AMB-0307, AMBL-0307
CBR-03
MB-03A, CB-02
MB-03A, CB-02, ECB-02
MB-03A
CB-01
CB-01
HB-15B
EMB-0307B, AMB-0307, AMBL-0307
MB-03A
ECB-0203
ECB-0203
ECB-0203
MB-03A, CB-02
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
DescriptionPN Sales Unit Application model Remarks
For pipe 125 - 800 mm dia.
For pipe 80 - 200 mm dia.
For min. 100 mm dia.
For chamfering R2
Used with Plate Ass'y for straight line use
SPRING BALANCER TIGON Spring Balancer ImprovesWork Safety and Efficiency
MODEL
TW-00TW-0TW-3TW-5TW-9TW-15TW-22TW-30TW-40TW-50TW-60TW-70
0.5 - 1.50.5 - 1.51.0 - 3.02.5 - 5.04.5 - 9.09.0 - 15.015.0 - 22.022.0 - 30.030.0 - 40.040.0 - 50.050.0 - 60.060.0 - 70.0
Capacity (kg)
0.51.01.31.31.31.31.51.51.51.51.51.5
Stroke (m)
0.20.51.41.53.43.87.27.69.810.411.611.8
Weight (kg)
MODEL
RW-0RW-3RW-5TW-06RTW-1R
0.5 - 1.51.0 - 3.02.5 - 5.00.2 - 0.60.5 - 1.5
Capacity (kg)
2.02.02.01.51.5
Stroke (m)
0.50.70.90.30.3
Weight (kg)
SPRING BALANCER series
RETRACTOR series
25