Post on 11-Feb-2018
7/23/2019 Planos Para Rack Portabotellas de Vino
1/12
Project: Four bottle wine rack Page 1 of 12
Four bottle wine rack
Wine has been part of many cultures since around 6000 BC and back then it played important rolein religion rituals. Since then it became one of the most popular drinks in the world, and if you are
one of the people that enjoy good glass of wine, you probably know how important the value of
the wine rack is.
Building a wine rack can be quite fun. This version of wine rack could be a beautiful decoration
for your kitchen, room or cellar. This wine rack will not only draw attention to all your guests and
neighbors, but it will also be a great peaceful object to look at and rest your mind.
Make the parts by following the given documentation and weld them together. Grind the welded
beads to look smooth. Paint the whole metal structure with the basic preserving color and when it
dries out, daub it two times with color for metal. The recommended color is black, because black
color gives the impression of a wrought iron to the whole structure and it adjusts well to almostany exterior or interior.
Use various tools and clamps in process of welding, so you could weld the parts together with
accuracy.
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
2/12
Project:
Wine rack parts list
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
3/12
Project: Four bottle wine rack Page 3 of 12
Wine rack assembly drawing
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
4/12
Project:
Wine rack welding
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
5/12
Project:
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
6/12
Project:
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
7/12
Project:
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
8/12
Project:
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
9/12
Project:
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
10/12
Project: Four bottle wine rack Page 10 of 12
Wine rack assemblage instructions
1. Weld the Ball (Part 2) to the lying base (Part 7).
2. Weld the carrier (Part 3) to the assembly made in the previous step.
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
11/12
Project: Four bottle wine rack Page 11 of 12
3. Weld the Bottle Holders (Part 4) to the assembly made in the previous step.
You will need two of these subassemblies.
http://www.craftsmanspace.com/7/23/2019 Planos Para Rack Portabotellas de Vino
12/12
Project: Four bottle wine rack Page 12 of 12
4. Form the wine rack by welding the Braces (Parts 5) between subassemblies made in the previous step.