Post on 06-Aug-2020
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Symbol
Rthha Thermal resistance hFor diameter electrodeof the air tunnel 220 m
Rthha Thermal resistance hFor diameter electrodeof the air tunnel 220 m
Rthha Thermal resistance hFor diameter electrodeof the air tunnel 440 m
Rthha Thermal resistance hFor diameter electrodeof the air tunnel 440 m
Qh Recommended amouMethodology of amoun
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position – ti
HP-35-00
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
Parameters, data
heatsink – ambient double side heating 1)
des of semiconductor devices 63 mm and the heighmm
4)
heatsink – ambient one side heating 2)
des of semiconductor devices 63 mm and the heighmm
4)
heatsink – ambient double side heating 1)
des of semiconductor devices 63 mm and the heighmm
4)
heatsink – ambient one side heating 2)
des of semiconductor devices 63 mm and the heighmm
4)
unt of coolant unt of coolant
ure range of coolant
tilt
pipes
Value Unit
ight 0,131
see chart K/W
ight 0,140
see chart K/W
ight 0,112
see chart K/W
ight 0,114
see chart K/W
Natural cooling
m3/hod
45 to -40
°C
4,1 kg
10 to 15 °
60
0 W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Symbol
Rthha Thermal resistance hFor diameter electrodeof the air tunnel 220 m
Rthha Thermal resistance hFor diameter electrodeof the air tunnel 220 m
Rthha Thermal resistance hFor diameter electrodeof the air tunnel 560 m
Rthha Thermal resistance hFor diameter electrodeof the air tunnel 560 m
Qh Recommended amouMethodology of the am
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position – ti
HP-41-00
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
Parameters, data
heatsink - ambient double side heating 1)
des of semiconductor devices 63 mm and the heighmm
4)
heatsink - ambient one side heating2)
des of semiconductor devices 63 mm and the heighmm
4)
heatsink - ambient double side heating 1)
des of semiconductor devices 63 mm and the heighmm
4)
heatsink - ambient one side heating 2)
des of semiconductor device 63 mm and the heightmm
4)
unt of coolant mount of coolant acc. STP
ure range of coolant
tilt
pipes
Value Unit
ight 0,131
see chart K/W
ight 0,154
see chart K/W
ight 0,113
see chart K/W
ht 0,120
see chart K/W
Natural cooling
m3/hod
45 to 0
°C
5,5 kg
10 to 15 °
60
0 W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Preliminary parame
Symbol
Rthha Thermal resistance hFor the electrode diamof air tunnel 270 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 270 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 530 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 530 mm
4)
Qh Recommended amouMethodology of the am
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position – ti
HP-44-00
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
eters
Parameter, data
heatsink - ambient double side heating1)
meter of semiconductor devices 63 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor devices 63 mm and height)
heatsink - ambient double side heating1)
meter of semiconductor devices 63 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor devices 63 mm and height)
unt of coolant mount of coolant acc. STP
ure range of coolant
tilt
pipes
Value Unit
ht 0,130
see chart K/W
ht 0,139
see chart K/W
ht 0,112
see chart K/W
ht 0,114
see chart K/W
Natural cooling
m3/hod
5 to 45
°C
5,0 kg
10 to 15 °
60
0 W
HPM therm s.r.o.., Moravské Lieskové 2, 91
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Preliminary parame
Symbol
Rthha Thermal resistance hFor the electrode diamof air tunnel 530 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 530 mm
4)
Qh Recommended amouMethodology of the am
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position - til
Heatsink color
HP-44-50
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
eters
Parameter, data
heatsink - ambient double side heating1)
meter of semiconductor devices 63 mm and height)
heatsink - ambient one side heating1)
meter of semiconductor devices 63 mm and height)
unt of coolant mount of coolant acc. STP
ure range of coolant
tilt
pipes
Value Unit
ht 0,106
see chart K/W
ht 0,112
see chart K/W
Natural cooling
m3/hod
5 to 45
°C
5,0 kg
10 to 15 °
Black cataphoresis
60
0 W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Symbol
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Qh Recommended amouMethodology of the am
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position - til
HP-77-00
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
Parameter, data
heatsink - ambient double side heating1)
meter of semiconductor devices 85 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor devices 85 mm and height)
heatsink - ambient double side heating1)
meter of semiconductor devices 63 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor devices 63 mm and height)
unt of coolant mount of coolant acc. STP
ure range of coolant
tilt
pipes
Value Unit
ht 0,085
see chart K/W
ht 0,090
see chart K/W
ht 0,107
see chart K/W
ht 0,110
see chart K/W
Natural cooling
m3/hod
5 to 45
°C
6,6 kg
10 to 15 °
10
00
W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Symbol
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Qh Recommended amouMethodology of the am
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position - til
Heatsink color
HP-77-50
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
Parameter, data
heatsink - ambient double side heating1)
meter of semiconductor devices 85 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor elements 85 mm and heig)
heatsink - ambient double side heating1)
meter of semiconductor devices 63 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor elements 63 mm and heig)
unt of coolant mount of coolant acc. STP
ure range of coolant
tilt
pipes
Value Unit
ht 0,077
see chart K/W
ight 0,082
see chart K/W
ht 0,098
see chart K/W
ight 0,100
see chart K/W
Natural cooling
m3/hod
5 to 45
°C
6,6 kg
10 to 15 °
black cataphoresis
12
00
W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Preliminary paramet
Symbol
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Qh Recommended amouMethodology of the am
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position - til
HP-78-00
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
eters
Parameter, data
heatsink – ambient double side heating1)
meter of semiconductor devices 85 mm and height)
heatsink – ambient one side heating2)
meter of semiconductor devices 85 mm and height)
heatsink – ambient double side heating1)
meter of semiconductor devices 63 mm and height)
heatsink – ambient one side heating2)
meter of semiconductor devices 63 mm and height)
unt of coolant mount of coolant acc. STP
ure range of coolant
tilt
pipes
Value Unit
ht 0,089
see chart K/W
ht 0,094
see chart K/W
ht 0,109
see chart K/W
ht 0,112
see chart K/W
Natural cooling
m3/hod
5 to 45
°C
6,4 kg
10 to 15 °
10
00
W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time
Air coole
Preliminary parame
Symbol
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Qh Recommended amouMethodology of the am
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position
Heatsink color
HP-78-50
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
eters
Parameter, data
heatsink – ambient double side heating1)
meter of semiconductor devices 85 mm and height)
heatsink – ambient one side heating2)
meter of semiconductor devices 85 mm and height)
heatsink – ambient double side heating1)
meter of semiconductor devices 63 mm and height)
heatsink – ambient one side heating2)
meter of semiconductor devices 63 mm and height)
unt of coolant mount of coolant acc. STP
ure range of coolant
pipes
Value Unit
ht 0,081
see chart K/W
ht 0,086
see chart K/W
ht 0,103
see chart K/W
ht 0,106
see chart K/W
Natural cooling
m3/hod
5 to 45
°C
6,4 kg
10 to 15 °
black cataphoresis
12
00
W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Společnost HPM therm s.r.o. si vyhrazuje právo tento dokument kdykoli změnit a to bez předchozího upozornění.
Air coole
Preliminary parame
Symbol
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Qh Recommended amouMethodology of the am
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position - til
HP-79-00
16 42 Moravské Lieskové, Slovensko
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
herm s.r.o. si vyhrazuje právo tento dokument kdykoli změnit a to bez předchozího upozornění.
led heatsink with heat p
eters
Parameter, data
heatsink - ambient double side heating1)
meter of semiconductor devices 85 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor devices 85 mm and height)
heatsink - ambient double side heating1)
meter of semiconductor devices 63 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor devices 63 mm and height)
unt of coolant mount of coolant acc. STP
ure range of coolant
tilt
herm s.r.o. si vyhrazuje právo tento dokument kdykoli změnit a to bez předchozího upozornění.
pipes
Value Unit
ht 0,093
see chart K/W
ht 0,098
see chart K/W
ht 0,111
see chart K/W
ht 0,113
see chart K/W
Natural cooling
m3/hod
5 to 45
°C
6,2 kg
10 to 15 °
10
00
W
HPM therm s.r.o., Moravské Lieskové 2, 91
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time
Air coole
Preliminary parame
Symbol
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Rthha Thermal resistance hFor the electrode diamof air tunnel 620 mm
4)
Qh Recommended amouMethodology of the am
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position
Heatsink color
HP-79-50
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
eters
Parameter, data
heatsink - ambient double side heating1)
meter of semiconductor devices 85 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor devices 85 mm and height)
heatsink - ambient double side heating1)
meter of semiconductor devices 63 mm and height)
heatsink - ambient one side heating2)
meter of semiconductor devices 63 mm and height)
unt of coolant mount of coolant acc. STP
ure range of coolant
pipes
Value Unit
ht 0,086
see chart K/W
ht 0,091
see chart K/W
ht 0,108
see chart K/W
ht 0,110
see chart K/W
Natural cooling
m3/hod
5 to 45
°C
6,2 kg
10 to 15 °
black cataphoresis
12
00
W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Symbol
Rthha Thermal resistance hFor diameter electrode
Rthha Thermal resistance hFor diameter electrode
Rthha Thermal resistance hFor diameter electrode
Qh Recommended amouMethodology of the am
∆ph Hydraulic loss for rec
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position – ti
HP-63-00
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
Parameters, data
heatsink - ambient double side heating
des of semiconductor devices to 63 mm
heatsink - ambient double side heating
des of semiconductor devices to 63 mm
heatsink - ambient one side heating
des of semiconductor devices to 63 mm
unt of coolant mount of coolant acc. STP
ecommended amount of coolant
ure range of coolant
tilt
pipes
Value Unit
0,070 K/W
0,060 K/W
0,079 K/W
200 m3/hod
100 Pa
35 to -40
°C
1,92 kg
15 to 165 °
80
0 W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o., reserves the right to change this document at any time without prior notice.
Air coole
Symbol
Rthha Thermal resistance hFor diameter electrode
Rthha Thermal resistance hFor diameter electrode
Rthha Thermal resistance hFor diameter electrode
Qh Recommended amouMethodology of the am
∆ph Hydraulic loss for rec
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position – ti
HP-63-20
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
reserves the right to change this document at any time without prior notice.
led heatsink with heat p
Parameters, data
heatsink – ambient double side heating
des of semiconductor devices to 47 mm
heatsink – ambient double side heating
des of semiconductor devices to 63 mm
heatsink – ambient one side heating
des of semiconductor devices to 63 mm
unt of coolant mount of coolant acc. STP
ecommended amount of coolant
ure range of coolant
tilt
pipes
Value Unit
0,070 K/W
0,060 K/W
0,079 K/W
200 m3/hod
100 Pa
35 to -40
°C
1,92 kg
15 to 165 °
80
0 W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Symbol
Rthha Thermal resistance hFor diameter electrode
Rthha Thermal resistance hFor diameter electrode
Qh Recommended amouMethodology of the am
∆ph Hydraulic loss for rec
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position – ti
HP-64-10
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat p
Parameters, data
heatsink – ambient double side heating
des of semiconductor devices to 85 mm
heatsink – ambient one side heating
des of semiconductor devices to 85 mm
unt of coolant mount of coolant acc. STP
ecommended amount of coolant
ure range of coolant
tilt
pipes
Value Unit
0,040 K/W
0,053
K/W
300 m3/hod
120 Pa
35 to -40
°C
2,63 kg
15 to 165 °
14
00
W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coole
Symbol
Rthha Thermal resistance hFor diameter electrode
Rthha Thermal resistance hFor diameter electrode
Qh Recommended amouMethodology of the am
∆ph Hydraulic loss for rec
Tamin - Tamax
Operating temperatur
Gh Heatsink weight
α Working position – ti
HP-71-10
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
reserves the right to change this document at any time without prior notice.
led heatsink with heat p
Parameters, data
heatsink – ambient double side heating
des of semiconductor devices 120 mm
heatsink – ambient one side heating
des of semiconductor devices 120 mm
unt of coolant mount of coolant acc. STP
ecommended amount of coolant
ure range of coolant
tilt
pipes
Value Unit
0,016 K/W
0,021 K/W
500 m3/hod
365 Pa
0 to 35
°C
6,5 kg
15 to 165 °
30
00
W
HPM Therm s.r.o., Moravské Lieskové 2, 91
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Air coolefor powe
Symbol
Rthha Thermal resistance hFor module size of sem
Qh Recommended amouMethodology of the am
∆ph Hydraulic loss for rec
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
α Working position – ti
HP-74-00
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
led heatsink with heat pwer semiconductor modu
Parameters, data
heatsink – ambient double side heating
emiconductor devices 130 x 140 mm
unt of coolant mount of coolant acc. STP
ecommended amount of coolant
ure range of coolant
tilt
pipes dules
Value Unit
0,0606 K/W
190 m3/hod
226 Pa
35 to -40
°C
2,75 kg
15 to 165 °
12
00
W
CW-PSQ-40
HPM therm s.r.o., Moravské Lieskové 2, 916 42 Moravské Lieskové, Slovensko
tel.: +421 32 7792 983, fax: +421 32 7792 984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol Parameters, data Value Unit
Rthha Thermal resistance heatsink – ambient double side heating For the electrode diameter of semiconductor devices 40 mm and coolant water
0,062 K/W
Rthha Thermal resistance heatsink – ambient one side heating For the electrode diameter of semiconductor devices 40 mm and coolant water
0,077 K/W
Qh Recommended amount of coolant 8 l/min
∆ph Hydraulic loss for recommended amount of coolant 9,1 kPa
Tamax - Tamin
Operating temperature range of coolant for water for oil for antifreeze
5 to 95
-40 to 120 -40 to 95
°C
Gh Heatsink weight 0,091 kg
Dmax Max. diameter electrodes semiconductor devices 40 mm
pzk Test pressure 1 MPa
Note: Heat parameters are valid for distilled water
From accessories for liquid cooled heatsinks select the type of fitting and outlet. For easy amplification of coolant to the heatsinks can be used mounted collector.
Liquid cooled heatsink
80
0 W
CW-PSQ-75
HPM therm s.r.o., Moravské Lieskové 2, 916 42 Moravské Lieskové, Slovakia
tel.: +421 32 7792 983, fax: +421 32 7792 984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol Parameters, data Value Unit
Rthha Thermal resistance heatsink - ambient double side heating For the electrode diameter of semiconductor devices 63 mm and coolant water
0,02 K/W
Rthha Thermal resistance heatsink - ambient one side heating For the electrode diameter of semiconductor devices 63 mm and coolant water
0,025 K/W
Qh Recommended amount of coolant 8 l/min
∆ph Hydraulic loss for recommended amount of coolant 15,5 kPa
Tamax - Tamin
Operating temperature range of coolant for water for oil for antifreeze
5 to 95
-40 to 120 -40 to 95
°C
Gh Heatsink weight 0,288 kg
Dmax Max. diameter electrodes semiconductor devices 63 mm
pzk Test pressure 1 MPa
Note: Heat parameters are valid for distilled water
From accessories for liquid cooled heatsinks select the type of fitting and outlet. For easy amplification of coolant to the heatsinks can be used mounted collector.
Liquid cooled heatsink
15
00
W
CW-PSQ-89
HPM therm s.r.o., Moravské Lieskové 2, 916 42 Moravské Lieskové, Slovakia
tel.: +421 32 7792 983, fax: +421 32 7792 984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol Parameters, data Value Unit
Rthha Thermal resistance heatsink - ambient one side heating For the electrode diameter of semiconductor devices 85 mm and coolant water
0,010 K/W
Qh Recommended amount of coolant 8 l/min
∆ph Hydraulic loss for recommended amount of coolant 14 kPa
Tamax - Tamin
Operating temperature range of coolant for water for oil for antifreeze
5 to 95
-40 to 120 -40 to 95
°C
Gh Heatsink weight 0,777 kg
Dmax Max. diameter electrodes semiconductor devices 85 mm
pzk Test pressure 1 MPa
Note: Heat parameters are valid for distilled water
From accessories for liquid cooled heatsinks select the type of fitting and outlet. For easy amplification of coolant to the coolers can be used mounted collector.
Liquid cooled heatsink
30
00
W
CW-PSQ-93
HPM therm s.r.o., Moravské Lieskové 2, 916 42 Moravské Lieskové, Slovakia
tel.: +421 32 7792 983, fax: +421 32 7792 984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol Parameters, data Value Unit
Rthha Thermal resistance heatsink - ambient double side heating For the electrode diameter of semiconductor devices 85 mm and coolant water
0,011 K/W
Rthha Thermal resistance heatsink - ambient one side heating For the electrode diameter of semiconductor devices 40 mm and coolant water
0,013 K/W
Qh Recommended amount of coolant 8 l/min
∆ph Hydraulic loss for recommended amount of coolant 17 kPa
Tamax - Tamin
Operating temperature range of coolant for water for oil for antifreeze
5 to 95
-40 to 120 -40 to 95
°C
Gh Heatsink weight 0,427 kg
Dmax Max. diameter electrodes semiconductor devices 85 mm
pzk Test pressure 1 MPa
Note: Heat parameters are valid for distilled water
From accessories for liquid cooled heatsinks select the type of fitting and outlet. For easy amplification of coolant to the heatsinks can be used mounted collector.
Liquid cooled heatsink
27
00
W
The ending for hose 3/8 " (Ø10)
CW-PSQ-110
HPM therm s.r.o., Moravské Lieskové 2, 916 42 Moravské Lieskové, Slovakia
tel.: +421 32 7792 983, fax: +421 32 7792 984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol Parameters, data Value Unit
Rthha Thermal resistance heatsink - ambient double side heating For the electrode diameter of semiconductor devices 85 mm and coolant water
0,008 K/W
Rthha Thermal resistance heatsink - ambient one side heating For the electrode diameter of semiconductor devices 85 mm and coolant water
0,010 K/W
Qh Recommended amount of coolant 8 l/min
∆ph Hydraulic loss for recommended amount of coolant 22,8 kPa
Tamax - Tamin
Operating temperature range of coolant for water for oil for antifreeze
5 to 95
-40 to 120 -40 to 95
°C
Gh Heatsink weight 0,588 kg
Dmax Max. diameter electrodes semiconductor devices 110 mm
pzk Test pressure 1 MPa
Note: Heat parameters are valid for distilled water
From accessories for liquid cooled heatsinks select the type of fitting and outlet. For easy amplification of coolant to the heatsinks can be used mounted collector.
Liquid cooled heatsink
37
00
W
The ending for hose 3/8 " (Ø10,1)
CW-PSQ-140
HPM therm s.r.o., Moravské Lieskové 2, 916 42 Moravské Lieskové, Slovakia
tel.: +421 32 7792 983, fax: +421 32 7792 984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol Parameters, data Value Unit
Rthha Thermal resistance heatsink - ambient double side heating For the electrode diameter of semiconductor devices 125 mm and coolant water
0,007 K/W
Rthha Thermal resistance heatsink - ambient one side heating For the electrode diameter of semiconductor devices 125 mm and coolant water
0,008 K/W
Qh Recommended amount of coolant 8 l/min
∆ph Hydraulic loss for recommended amount of coolant 31,2 kPa
Tamax - Tamin
Operating temperature range of coolant for water for oil for antifreeze
5 to 95
-40 to 120 -40 to 95
°C
Gh Heatsink weight 0,974 kg
Dmax Max. diameter electrodes semiconductor devices 125 mm
pzk Test pressure 1 MPa
Note: Heat parameters are valid for distilled water
From accessories for liquid cooled heatsinks select the type of fitting and outlet. For easy amplification of coolant to the heatsinks can be used mounted collector.
Liquid cooled heatsink
35
00
W
The ending for hose 3/8 " (Ø10,1)
CW-PSR-110-62
HPM therm s.r.o., Moravské Lieskové 2, 916 42 Moravské Lieskové, Slovakia
tel.: +421 32 7792 983, fax: +421 32 7792 984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol Parameters, data Value Unit
Rthha Thermal resistance heatsink - ambient one side heating 0,035 K/W
Qh Recommended amount of coolant 8 l/min
∆ph Hydraulic loss for recommended amount of coolant 15,7 kPa
Tamax - Tamin
Operating temperature range of coolant for water for oil for antifreeze
5 to 95
-40 to 120 -40 to 95
°C
Gh Heatsink weight 0,344 kg
A x B max The size of semiconductor devices of modules (1x module)
62 x 110 mm
pzk Test pressure 1 MPa
Note: Heat parameters are valid for distilled water
From accessories for liquid cooled heatsinks select the type of fitting. For easy amplification of coolant to the heatsinks can be used mounted collector.
Liquid cooled heatsink for power semiconductor modules 1
00
0 W
The ending for hose 3/8 " (Ø10,1)
CW-PSR-110-130
HPM therm s.r.o., Moravské Lieskové 2, 916 42 Moravské Lieskové, Slovakia
tel.: +421 32 7792 983, fax: +421 32 7792 984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol Parameters, data Value Unit
Rthha Thermal resistance heatsink - ambient one side heating 0,0167 K/W
Qh Recommended amount of coolant 8 l/min
∆ph Hydraulic loss for recommended amount of coolant 16,3 kPa
Tamax - Tamin
Operating temperature range of coolant for water for oil for antifreeze
5 to 95
-40 to 120 -40 to 95
°C
Gh Heatsink weight 0,678 kg
A x B max The size of semiconductor devices of modules (2x module)
62 x 110 mm
pzk Test pressure 1 MPa
Note: Heat parameters are valid for distilled water
From accessories for liquid cooled heatsink select the type of fitting. For easy amplification of coolant to the heatsinks can be used mounted collector.
Liquid cooled heatsink for power semiconductor modules 2
00
0 W
The ending for hose 3/8 " (Ø10,1)
CW-PSR-127-305
HPM therm s.r.o., Moravské Lieskové 2, 916 42 Moravské Lieskové, Slovakia
tel.: +421 32 7792 983, fax: +421 32 7792 984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol Parameters, data Value Unit
Rthha Thermal resistance heatsink - ambient one side heating 0,01 K/W
Qh Recommended amount of coolant 8 l/min
∆ph Hydraulic loss for recommended amount of coolant 17,6 kPa
Tamin - Tamax Operating temperature range of coolant for water for oil for antifreeze
5 to 95
-40 to 120 -40 to 95
°C
Tstg Storage temperature range -40 to 80 °C
A x B max The size of semiconductor devices of modules (4x module) 110 x 62 mm
pzk Test pressure 1 MPa
Note: Heat parameters are valid for distilled water
From accessories for liquid cooled heatsinks select the type of fitting. For easy amplification of coolant to the heatsinks can be used mounted collector.
Liquid cooled heatsink for power semiconductor modules 4
00
0 W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Liq for pow
Symbol
Rthha Thermal resistance h
Qh Recommended amou
∆ph Hydraulic loss for rec
Tamax - Tamin
Operating temperaturfor water for oil for antifreeze
Gh Heatsink weight
A x B max The size of semicond
pzk Test pressure
Note: Heat parameters are valid for distilled w
From accessories for liquid cooled hheatsinks can be used mounted coll
CW-PSR-140-130
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
iquid cooled heatsink wer semiconductor mod
Parameters, data
heatsink - ambient
unt of coolant
ecommended amount of coolant
ure range of coolant
ductor devices of modules (1x module)
water
heatsink select the type of fitting. For easy amplificllector.
30
dules
Value Unit
0,0093 K/W
8 l/min
22,9 kPa
5 to 95
-40 to 120 -40 to 95
°C
0,87 kg
140 x 130 mm
1 MPa
ification of coolant to the
30
00
W
The ending for hose 3/8 " (Ø10,1)
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Liq for pow
Symbol
Rthha Thermal resistance h
Qh Recommended amou
∆ph Hydraulic loss for rec
Tamax - Tamin
Operating temperaturfor water for oil for antifreeze
Gh Heatsink weight
A x B max The size of semicond
pzk Test pressure
Note: Heat parameters are valid for distilled w
From accessories for liquid cooled hheatsinks can be used mounted coll
CW-PSR-140-190
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
iquid cooled heatsink wer semiconductor mod
Parameters, data
heatsink - ambient
unt of coolant
ecommended amount of coolant
ure range of coolant
ductor devices of modules (1x module)
water
heatsinks select the type of fitting. For easy amplifllector.
90
dules
Value Unit
0,0064 K/W
8 l/min
25,2 kPa
5 to 95
-40 to 120 -40 to 95
°C
1,27 kg
140 x 190 mm
1 MPa
lification of coolant to the
40
00
W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Liq for pow
Symbol
Rthha Thermal resistance h
Qh Recommended amou
∆ph Hydraulic loss for rec
Tamax - Tamin
Operating temperaturfor water for oil for antifreeze
Gh Heatsink weight
A x B max The size of semicond
pzk Test pressure
Note: Heat parameters are valid for distilled w
From accessories for liquid cooled hheatsinks can be used mounted coll
CW-PSR-140-190 var
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
iquid cooled heatsink wer semiconductor mod
Parameter, data
heatsink - ambient
unt of coolant
ecommended amount of coolant
ure range of coolant
ductor device of modules (1x module)
water
heatsinks select the type of fitting. For easy amplifllector.
var P
dules
Value Unit
0,0061 K/W
48 l/min
21,8 kPa
5 to 95
-40 to 120 -40 to 90
°C
1,536 kg
140 x 190 mm
1 MPa
lification of coolant to the
40
00
W
CW
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Společnost HPM therm s.r.o. si vyhrazuje právo tento dokument kdykoli změnit a to bez
Liqfor powe
Symbol
Rthha Thermal resistance hThermal resistance he0,0061 K/W
Qh Recommended amou
∆ph Hydraulic loss for rec
Tamax - Tamin
Operating temperaturfor water for oil for antifreeze
Gh Heatsink weight
A x B max The size of semicond
pzk Test pressure
Note: Heat parameters are valid for deminera
From accessories for liquid heatsinkcan be used mounted collector of co
CW-PSR-140-190 var 4/2
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
herm s.r.o. si vyhrazuje právo tento dokument kdykoli změnit a to bez předchozího upozornění.
iquid cooled heatsink wer semiconductor modu
Preliminary parameters
Parameter, data
heatsink - ambient eatsink – around for 1 module 140x190mm je
unt of coolant
ecommended amount of coolant
ure range
ductor devices of modules (4x module)
ralized water
ks select the type of fitting. For easy amplification coolant.
4/2s-P
předchozího upozornění.
dules
Value Unit
0,0018 K/W
48 l/min
32,6 kPa
5 to 95
-40 to 120 -40 to 90
°C
5,4 kg
140 x 190 mm
1 MPa
n of coolant to the heatsinks
10
000
W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Liquid c
Symbol
Rthha Thermal resistance h
Qh Recommended amou
∆ph Hydraulic loss for rec
Tamax - Tamin
Operating temperatur
Gh Heatsink weight
Dmax Max. diameter electroThe size of semicond
pzk Test Pressure
L Heatsink length Max length is 300mm becassembled in series in te
i The number of pipes Heatsink width is not limi
a The size of area that of power semiconducFor power semiconducto
From accessories for liquid cooled hcoolant to the heatsinks can be usedWhen ordering liquid cooled heatsinsketch, type of power semiconducto
CW-PSR(PSQ)-custom
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
cooled heatsink - custom
Parameters, data
heatsink - ambient
unt of coolant
ecommended amount of coolant
ure range of coolant
rodes semiconductor devices. ductor devices of modules (4x module)
ecause of technical reasons. Heatsinks can be terms of air flow
- 1 ited = a+10+i*18+10+a
can be drilled holes with threads for mountinuctor modules. tor devices of disk shape is a = 0 mm
heatsinks select the type of fitting and outlet. For eed mounted collector. ink - customer, please indicate the number of pipestor device, or module and the type of coolant.
The end3/8 "
tomer
omer
Value Unit
? K/W
8 l/min
? kPa
acc customer
°C
? kg
acc customer
mm
1 MPa
acc customer
mm
acc customer
-
ing acc customer
-
r easy amplification of
es, size a and length, or the
??
??
W
nding for hose " (Ø10,1)
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol
P Power power range
U Supply voltage*)
supply voltage range
Tmax Maximum temperaturpermanent operation
Ak x bk Contact area size
A x B Maximum dimension
de Electrical connection
dm Mechanical connectio
Fm Maximum mounting f
Tc Thermocouple embed
Material
*) can be changed as required
H 110 x 62
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
Heater
Parameters, data
ure
ns
n
tion
force
edded in heater
Value Unit
0 - 1000 W
0 - 230 0 - 50
V DC (AC)
300 °C
110 x 62 mm
130 x 62 mm
M6
M6
100 kN
Type K
stainless steel
11
0 x
62
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol
P Power power range
U Supply voltage *)
supply voltage range
Tmax Maximum temperaturpermanent operation
Ak x bk Contact area size
A x B Maximum dimension
de Electrical connection
dm Mechanical connectio
Fm Maximum mounting f
Tc Thermocouple embed
Material
*) can be changed as required
H 130 x 140
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
Heater
Parameters, data
ure
ns
n
tion
force
edded in heater
Value Unit
0 - 2500 W
0 - 230 0 - 50
V DC (AC)
300 °C
130 x 140 mm
150 x 140 mm
M6
M6
100 kN
Type K
stainless steel
13
0 x
14
0
HPM therm s.r.o., Moravské Lieskové 2, 91
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol
P Power power range
U Supply voltage *)
supply voltage range
Tmax Maximum temperaturpermanent operation
Ak x bk Contact area size
A x B Maximum dimension
de Electrical connection
dm Mechanical connectio
Fm Maximum mounting f
Tc Thermocouple embed
Material
*) can be changed as required
H 190 x 140
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
Heater
Parameters, data
ure
ns
n
tion
force
edded in heater
Value Unit
0 - 3000 W
0 - 230 0 - 50
V DC (AC)
300 °C
190 x 140 mm
210 x 140 mm
M6
M6
100 kN
Type K
Stainless steel
19
0 x
14
0
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol
P Power power range
U Supply voltage*)
supply voltage range
Tmax Maximum temperaturpermanent operation
D Diameter contact are
A x B Maximum dimension
de Electrical connection
dm Mechanical connectio
Fm Maximum mounting f
Tc Thermocouple embed
Material
*) can be changed as required
H D85
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
Heater
Parameters, data
ure
rea
ns
n
tion
force
edded in heater
Value Unit
0 - 2000 W
0 - 230 0 - 50
V DC (AC)
300 °C
85 mm
15 x 105 mm
M6
M6
100 kN
Typ K
stainless steel
D 8
5
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Symbol
P Power power range
U Supply voltage*)
supply voltage range
Tmax Maximum temperaturpermanent operation
D Diameter contact are
A x B Maximum dimension
de Electrical connection
dm Mechanical connectio
Fm Maximum mounting f
Tc Thermocouple embed
Material
*) can be changed as required
H D125
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
Heater
Parameters, data
ure
rea
ns
n
tion
force
edded in heater
Value Unit
0 - 3000 W
0 - 230 0 - 50
V DC (AC)
300 °C
125 mm
15 x 145 mm
M6
M6
100 kN
Type K
stainless steel
D 1
25
Mo
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time
Accessori
Symbol
D Diameter of collectingRecommended dimens D = √(Σdi
2)
di Diameter distribution
i The number of distrib
L Length distribution
x Distribution spacing Can be changed as ne
Material
Surface finish
Distribution is provided with fittings a
Mounted collector of coo
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
ries for liquid cooled hea
Parameters, data
ng distribution nsions (outer diameter x wall thickness):
n
ibutions
necessary
as required.
f coolant
eatsink
Value Unit
10x1 12x1 15x1 18x1 22x1 28x1 35x1
42x1,5 54x2 64x2
76,1x2,5 88,9x2,5 108x2,5
mm
10x1 mm
not limited
115+i*x mm
44 mm
copper
not
x
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without
Accessorie
Symbol
Assign a type of fittinOK17 OK19 Hose clip
Material
Surface finish
Fittings
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
ies for liquid cooled hea
Parameters, data
ing to liquid cooled heatsink - all types of heatsinks - all types of heatsinks except CW-PSQ-4
- all types of heatsinks
atsinks
Value Unit
40
copper
No
x
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this
Accessori
Symbol
Assign a type of outleOutlet type 40 – Outlet type 75 - Outlet type 110 - Outlet type 146 -
Imax Maximum current loaOutlet 40 Outlet 75 Outlet 110 Outlet 146
A Recommended spaciOutlet 40 Outlet 75 Outlet 110 Outlet 146
Material
Surface finish
*) outlets of the same type can be pu
Outlets
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
ries for liquid cooled hea
Parameters, data
tlet to liquid cooled heatsink CW-PSQ-40 CW-PSQ-75 CW-PSQ-110 CW-PSQ-146
ad of outlet*)
cing of mounting clamps
put parallelly, then current load is counting up
eatsink
Value Unit
600 1100 1700 2200
A
90
120-140 160-200
220
mm
copper
tinning
x
30/30/
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 98
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Accessories for liq
Symbol
Pv Cooling power
Tin Inlet temperature of corecommended inlet tem
Tout Outlet temperature of
Qv Recommended amoun
∆pv Hydraulic loss for reco
- Coolant
Ta Ambient temperature
Qa Recommended amounMethodology of the amo
∆pa Hydraulic loss for reco
BL x BH x BT
Heat exchanger dimen
Gv Heat exchanger weigh
Terminals are provided with fittings oHeat exchanger - heatsink Cu/Al is d(Pv, Tin, Tout, Qv, Ta, Qa)
/30/16-3R-14T-400A-2,5Cu/Al/AlMg3
42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
liquid cooled heatsink - He
Parameters, data
coolant mperature of coolant
f coolant
unt of coolant
commended amount of coolant
unt of cooling air ount of coolant acc. STP
commended amount of cooling air
ensions
ht
of your choice designed acc. the wishes to arbitrary dimension ac
2,5PA-1C-
eat exchanger
Value Unit
5746 W
60 °C
45 °C
5,5 l/min
10,5 kPa
water -
25 °C
1100 m3/hod
32 Pa
400 x 480 x 110
mm
8 kg
acc. assigned parameters
57
00
W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time
H
Symbol
- Used heatsink
Qh Recommended amouMethodology of the am
∆ph Hydraulic loss for rec
Tstg Storage temperature
Vhm Electric resistance
Dmax Diameter electrodes s
D1max Diameter of semicond
Fm Mounting force (max.
a x b x c Main overall dimensio
a´ x b´ Connecting dimensio
Ga Assembly weight
d x e Finned dimensions in
Category of climatic resistance ac
Vibration resistance acc. ČSN EN
Shock resistance acc. ČSN EN 60
Working environment for heatsink
HA-63-03-01
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
Heatsink assembly
Parameters, data
unt of coolant mount of coolant acc. STP
ecommended amount of coolant
e range
Tested 50 Hz, 60 s
semiconductor devices (max.)
nductor devices (max.)
x.)
ions (no electrical outlets) 263
ions
in the direction of air flow
acc. ČSN EN 60068-2 and related standards
N 60068-2-6 Test Fc 4/55/0,75/6
0068-2-75 Test Eb 25/6/1000
nk (typical) acc. ČSN 332000-3
Value Unit
3 HP-63-00
ks
600
m3/hod
100 Pa
-40 to 80 °C
5 kV
63 mm
101,5 mm
24 kN
63 x 160 x 293 mm
210 x 125 mm
14 kg
160 x 175 mm
40/110/21
3 g
3 g
AA2/AA5, AC1, AD1, AE1, AF1, AG2, AH2,
AK1, AL1, BA5
3 x
80
0 W
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
C
H2O
Symbol
ρ Density at 20°C
c Specific heat at 20°C
λ Thermal conductivity
η Dynamic viscosity at
ν Kinematic viscosity a
G Electric conductivity
Tamax - Tamin Operating temperatur
Tstg Storage temperature
Compatibility with oth
Ecological and toxico
* increased reactivity with ferrous me
Demineralized water
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
right to change this document at any time without prior notice.
Coolant for module
Parameter, data
C
ty at 20°C
at 20°C
at 20°C
y at 20 °C
ure range
e range in closed container
ther materials
cological information acc. 356/2003Sb
metals
ater
Value Unit
998 Kg/m3
4183 J/(kg*K)
0,598 W/(m*K)
1 mPa*s
1 mm2/s
0,1 mS/cm
5 to 90 °C
5 to 80 °C
corrosive*
Ecologically safe
Vo
da
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
C
C3H8O2
50:50 with wate
Symbol
ρ Density at 20°C
c Specific heat at 20°C
λ Thermal conductivity
η Dynamic viscosity at
ν Kinematic viscosity a
G Electric conductivity
Tamax - Tamin Operating temperatur
Tstg Storage temperature
Compatibility with oth
Ecological and toxico
* increased reactivity with oxidizing a
Propylene glycol -3
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
Coolant for modules
ater
Parameter, data
C
ty at 20°C
at 20°C
at 20°C
y at 20 °C
ure range
e range in closed container
ther materials
cological information acc. 356/2003Sb
agents
30
Value Unit
1043 Kg/m3
3628 J/(kg*K)
0,362 W/(m*K)
6,18 mPa*s
5,93 mm2/s
not listed mS/cm
-30 to 90 °C
15 to 25 °C
indifferent*
Not dangerous
S24, S25
Gly
ko
l
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
C
Symbol
ρ Density at 20°C
c Specific heat at 20°C
λ Thermal conductivity
η Dynamic viscosity at
ν Kinematic viscosity a
G Electric conductivity
Tamax - Tamin Operating temperatur
Tstg Storage temperature
Compatibility with oth- liquid contains corros
Ecological and toxico
* attacks galvanized steel, zinc and
Temper -40
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
Coolant for modules
Parameter, data
C
ty at 20°C
at 20°C
at 20°C
y at 20 °C
ure range
e range in closed container
ther materials osion inhibitors
cological information acc. 93/112/EEC
d solder
Value Unit
1207 Kg/m3
3008 J/(kg*K)
0,465 W/(m*K)
2,71 mPa*s
2,25 mm2/s
160 mS/cm
-40 to 180 °C
-10 to 80 °C
indifferent*
ecological non-toxic
Te
mp
er
Dow
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Heat
Symbol
λ Thermal conductivity
Vh Electric resistance Tested 50 Hz, 60 s
Colour
η Dynamic viscosity at
Rthch Thermal resistance a
Dow Corning SC 102 Comp
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
. reserves the right to change this document at any time without prior notice.
at leading contact grease
Parameter, data
ty
at 20°C
at 276 kPa
ompound
se
Value Unit
0,9 W/(m*K)
2 kV/mm
white
29 Pa*s
0,62 °C*cm2/W
SC
10
2
Dow
HPM therm s.r.o., Moravské Lieskové 2, 916
tel.: +421 32 7792 983, fax: +421 32 7792 9
Company HPM therm s.r.o. reserves the right to change this document at any time without prior notice.
Heat
Symbol
λ Thermal conductivity
Vh Electric resistance Tested 50 Hz, 60 s
Color
hmax The coating – maximu
η Dynamic viscosity at
Rthch Thermal resistance a
Rthch Thermal resistance foSOT 227 module 92x20 mm module 94x47 mm ø20 at 5 kN double sidø30 at 7 kN double sidø34 at 10 kN double siø39 at 15 kN double siø47 at 22 kN double siø63 at 50 kN double si
Dow Corning DC 340 Heat
16 42 Moravské Lieskové, Slovakia
984, http://www.hpmtherm.eu, e-mail: office@hpmtherm.eu
reserves the right to change this document at any time without prior notice.
at leading contact grease
Parameter, data
ty
um
at 20°C
at 276 kPa
for
ide cooling ide cooling side cooling side cooling side cooling side cooling
Heat Sink
se
Value Unit
0,67 W/(m*K)
2 kV/mm
white
0,1 mm
542 Pa*s
0,16 °C*cm2/W
0,100 0,100 0,090 0,030 0,015 0,011 0,008 0,006 0,005
K/W
DC
34
0