Post on 12-May-2022
PixiePlus™ Control System for Epson Projectorsprojector AND A/V coNtrol
With the pixieplus control system for epson, you can easily control epson projectors and associated A/V devices
using either rS-232 or Ir programming codes. the pixieplus control system also allows you to consolidate your
projector and source controls in one wall unit, so you don’t ever have to worry about lost remotes again. And, it is
incredibly easy to install. Its sleek backlit panel fits in any wall box. It also comes with the standard rS-232 control
codes for epson projectors pre-installed. Best of all, it’s safe and secure with its convenient security code feature.
Convenient compatibility — controls epson projectors and A/V devices using either rS-232 or
Ir commands
Easy installation — installs in any standard wall box; has rS-232 codes for epson projectors pre-installed
PC-free programming — use the Ir remote control for your A/V device(s) to quickly program
the control system
Automatic projector shutdown timer — saves both money and energy
Secure in any setting — create your own security code to prevent unauthorized access
Projector control made easy.
epson is a registered trademark, epson exceed Your Vision is a registered logomark and Better products for a Better Future is a trademark of Seiko epson corporation. SmartWay is a service mark of the U.S. environmental protection Agency. All other product and brand names are trademarks and/or registered trademarks of their respective companies. epson disclaims any and all rights in these marks. copyright 2011 epson America, Inc. cpD-32295r1 1/11 pDF
Epson America, Inc. 3840 Kilroy Airport Way, Long Beach, CA 90806
Epson Canada, Ltd. 3771 Victoria Park Avenue, Toronto, Ontario M1W 3Z5
www.epson.com www.epson.ca
POWER
ON OFF
POWER
SOURCE SOURCE
VIDEO
COMP
SOURCE
comp video
audio
VOLUME
Easy To InstallThe single-gang PixiePlus fits in a standard wall box with a Decora™ wallplate (not included).
A three-conductor cable between the PixiePlus and the controlled device carries power and control to a supplied terminal block that allows RS-232 and/or IR control. One block is included. Others may be added to control additional devices.
RS-232/IRTerminal Block
Product Name Product Code UPCPixiePlus ELPSP10 0 10343 88080 1
Accessories Product Code UPCPXE-PGM-Tool (programming wand) ELPSP12 0 10343 88082 5
SpecificationsPackage Type Single-gang Decora™ mountingDimensions (W x D x H) 1.75" x .90" x 4.13"Weight (with bezel and 3 insert modules) 2.5 ozPower Supply 6 VDC, 300 mAOutput Type IR emitter and unidirectional RS-232Outboard Current-Limiting Resistor (IR emitter) 150 ohmRecommended Wire 18- to 22-gauge 3-conductor copper wire
eco.epson.com
PixiePlus™ Control System for Epson Projectorsprojector and A/V control
Button OptionsPowerIf the device you are controlling has discrete power buttons, use the ON/OFF combination; otherwise, use the toggling power
POWER
ON OFF
POWER
SOURCE SOURCE
VIDEO
COMP
SOURCE
comp video
audio
VOLUME
SourceDepending on the configuration of the source inputs of your display, you can choose among these included source selection options
VolumeSome displays have volume, while others do not
POWER
ON OFF
POWER
SOURCE SOURCE
VIDEO
COMP
SOURCE
comp video
audio
VOLUME
POWER
ON OFF
POWER
SOURCE SOURCE
VIDEO
COMP
SOURCE
comp video
audio
VOLUME
Circuit Board
Single-gang Wall Box
(not included)Button InsertsBezel
Cat-5 Cable
IR Emitter Bud(For use with the
Epson AP-60, or other IR controlled devices)
RS-232 Cable
PixiePlus Control
6 V Power Supply
PXE-PGM-Tool Programming wand
POWER
ON OFF
POWER
SOURCE SOURCE
VIDEO
COMP
SOURCE
comp video
audio
VOLUME