Post on 03-Jul-2020
Pipelines &Utilities
3
Extruded mesh and tape products are used in pipeline and utility projects to protect,identify, locate and warn of proximity.
Flexible mesh products are used in major pipeline projects to replace the thick sand collarthat would traditionally have been placed to cushion the protective coating around asteel pipe.
Sand is a primary resource and is not always available locally to an overland project. Evenwhen it is, its bulk means there is a heavy environmental price to pay for its transportation.Sand requires plant for installation and it is difficult to place consistently around a pipe. Apolymeric mesh is more compact to transport and it can be installed relatively quicklyand with consistency. As with sand, the mesh prevents stone in the backfill from abradingand puncturing the pipe’s coating which would otherwise interrupt the cathodic protectionsystem.
Ancillary items include cable covers, marker plates and signs.
Mesh products, tapes and ancillaryitems for pipeline and utility projects
Why Fiberweb Geosynthetics Ltd and Terram products?
Fiberweb plc established Fiberweb Geosynthetics Ltd after the acquisition of BoddingtonsInternational Ltd in 2010. The resulting portfolio includes the products for pipeline andutility projects which were historically associated with Boddingtons. The UK manufacturingcapability is being expanded and centralised at Maldon in Essex.
Fiberweb Geosynthetics Ltd provides a unique range of value-engineered solutionsthat also help minimise the environmental impact of construction. With unrivalledexpertise and experience in geosynthetics, accumulated over a 40 year period sinceTerram was first launched, the Company remains committed to the development ofinnovative and cost-effective geosynthetic solutions.
The Company intends to lead the market in the design and manufacture of innovativegeosynthetics, and continue to provide ground-breaking solutions - the next generationof Terram products.
Root Guard
Protectamesh™HD Rockshield is a new thick pipelineprotection mesh manufactured by Fiberweb Geosyntheticsfor protecting pipeline coatings from rock backfills.Protectamesh™HD cushions the impact of rocks whichcan cause damage to the pipe coating and result in thecorrosion of the pipeline and is essential for projectswhere pipelines are constructed through rocky terrain.
Protectamesh™HD Rockshield Pipe protection mesh
4
Protectamesh™HD is a three dimensional bi-planarextruded diamond structured mesh manufacturedfrom low-density polyethylene. Protectamesh™HDoffers protection from abrasive objects afterinstallation, prohibiting geologic movements fromdamaging your pipeline.
Mesh thickness of 10mm (0.40”)
Supplied in widths 1.22m, 1.53m or1.83m (4ft, 5ft or 6ft)
Can be supplied in rolls or in pads for easyinstallation (cut pieces)
Black or Yellow colours available
Flexible for easy handling at low temperature
Chemically inert
Porous mesh structure allows water flowfor cathodic protection and testing
High impact resistance to ASTM G13 MOD
High impact strength and tensile strength
Up to half the weight of alternatives
Protectamesh™ HD is essential where pipelines areconstructed through rocky terrain.
Protectamesh™ HD protects the pipes anti-corrosion coating.
Root Guard
5
Protectamesh™ used to protect the pipeline from theconcrete saddle weights.
Protectamesh™ absorbs any movement between thepipe and the concrete saddles.
WIDTH THICKNESSg/m2
UNIT WEIGHTlb/ft2
COLOUR
1.22m (4ft)
1.22m (4ft)
1.53m (5ft)
1.53m (5ft)
1.83m (6ft)
1.83m (6ft)
10mm (0.40”)
10mm (0.40”)
10mm (0.40”)
10mm (0.40”)
10mm (0.40”)
10mm (0.40”)
1500
1500
1500
1500
1500
1500
0.32
0.32
0.32
0.32
0.32
0.32
Black
Yellow
Black
Yellow
Black
Yellow
APERTURE(Diamond structure)
4mm x 4mm (0.16” x 0.16”)
4mm x 4mm (0.16” x 0.16”)
4mm x 4mm (0.16” x 0.16”)
4mm x 4mm (0.16” x 0.16”)
4mm x 4mm (0.16” x 0.16”)
4mm x 4mm (0.16” x 0.16”)
PRODUCT DETAILS
Protectamesh ™
HD is flexible evenat sub-zero temperatures
Available in black or yellow
Lightweight
Cost effective
Manufactured to withstandextreme weather conditions,hot to cold
Protects pipe coating fromprotruding rocks
Available in rolls or pads
Minimises abrasion ofcoating from pipemovement underground
Root Guard
Rockshield Pipe protection mesh
Rockshield meshes are manufactured from high densitypolyethylene, and are designed to act as a shield againstimpact damage from rocks during backfilling, ensuring theprotective coatings on the pipes are not damaged.Rockshield meshes can be used where metallic pipes areinstalled in rocky terrain, or in areas where soil movementis a possibility.
ProductRoll Size
(feet)Roll Size
(m) g/m2
Unit Weightlb/ft2
Max pipe diameter forlongitudinal wrappingColour
BRS 1, 2
BRS 3
BRS 5, 6, 7
BRS 11
BRS 12
BRS 13
BRS 15
1.5 x 20
1.0 x 20
2.0 x 24
1.0 x 30
1.54 x 30.48
1.84 x 30.48
1.65 x 20
4.9 x 65.6
3.28 x 65.6
6.5 x 78.7
3.28 x 98.4
5 x 100
6 x 100
5.4 x 65.6
750, 950, 1200
1200
1200, 950, 750
600
560
560
950
0.154, 0.195, 0.246
0.246
0.246, 0.195, 0.154
0.123
0.115
0.115
0.195
Black
Black
Black
Black
Black
Black
Black
430mm
270mm
585mm
270mm
440mm
535mm
475mm
16.9 in.
10.6 in.
23 in.
10.6 in.
17.3 in.
21 in.
18.7 in.
The polyethylene mesh can incorporate a blowing agent toproduce a strong cellular cushioning structure offeringmaximum protection against rock impact damage duringbackfilling operations and protruding rocks in the trench.Chemically inert, the mesh will not rot and the open meshstructure allows water to flow around the pipe ensuringcathodic protection is not affected.
Various grades of mesh are offered to produce a rangeof solutions to meet the most demanding conditions.A wide range of alternative grades can be manufacturedto your specification subject to a minimum orderquantity. Rockshield mesh can be manufactured invarious roll sizes and cut pieces, with widths up to 2.5mwide and in various lengths. Custom mesh structuresand roll sizes can be manufactured to suit individualrequirements subject to minimum order quantities.
Technical Specifications
6
High resistance to compression, tearing and wearing
Adaptable to all pipeline sizes
Chemically inert
Light, flexible and easy to install in 3 different ways
Durable without the loss of the cushioning characteristics
Unaffected by temperature extremes and wet weather
Maintains cathodic protection without inhibiting cathodic flow
Root Guard
All rolls should be of adequate coverage to entirely cover the circumference of the pipe.
PROTECTAMESH is to be placed around pipe, whereby placing overlap portion at the 6 o’clockposition of the pipe.
Place all end to end overlaps min. 50mm/ 2”; all parallel pad overlaps min 150mm/ 6”.
In the event that a side overlap is used place the overlaps “shingle style”. This will ensure that no backfill will protrude underthe PROTECTAMESH
After pads are secured to the pipe, the backfill process may take place.
ROLLS
Sizing your pipe - for ProtectameshPIPE DIAMETER PIPE CIRCUMFERENCE PAD SIZE
7
Rockshield Application Diagram
Custom cut pads should be wrapped around thecircumference of the pipe, covering all exposedareas. Ensure that all pads are of sufficientdimension to protect the entire pipe.
All pad overlaps shall be placed at the 6 o’clockposition of the pipe, taking care to securethe PROTECTAMESH with a polypropylene banding.
Place all end to end overlaps min. 50mm/ 2”; allparallel pad overlaps min.150mm/ 6”.
All pads shall be secured to the pipe by using a min.18mm/ 0.7” wide polypropylene banding.
After pads are secured to the pipe, the backfillprocess may take place.
PADS
Section View
50mm / 2”
100mm / 4”
150mm / 6”
200mm / 8”
250mm / 12”
305mm / 12”
355mm / 14”
405mm / 16”
455mm / 18”
510mm / 20”
560mm / 22”
610mm / 24”
660mm / 26”
710mm / 28”
760mm / 30”
815mm / 32”
865mm / 34”
915mm / 36”
1065mm / 42”
1220mm / 48”
157mm / 6.3”
315mm / 12.3”
472mm / 25.1”
629mm / 25.1”
786mm / 31.5”
960mm / 37.75”
1100mm / 43.9”
1270mm / 50.2”
1430mm / 56.5”
1605mm / 62.8”
1760mm / 69”
1915mm / 75.3”
2075mm / 81.6”
2230mm / 87.9”
2390mm / 94”
2560mm / 100.5”
2720mm / 106.75”
2875mm / 113”
3350mm / 131.8”
3835mm / 150.7”
300mm / 12”
450mm / 18”
600mm / 24”
750mm / 32”
900mm / 36”
1100mm / 44”
1250mm / 45”
1400mm / 54”
1550mm / 60”
1750mm / 67”
1900mm / 72”
2050mm / 80”
2200mm / 98”
2350mm / 92”
2500mm / 98”
2700mm / 104”
2850mm / 111”
3000mm / 117”
3500mm / 136”
3950mm / 155”
Root Guard
Utilitape™
Underground Warning Tape
Utilitape™ is the most economical way of warningexcavators of buried services below ground. Our tapescan be printed with any text in any language, any colourand any size, manufactured to your specifications.Standard texts are available ex-stock.
Special manufacture available
Premium & Economy grades available
Material - High quality linear low density polyethylene.
Lead free pigments with virgin grade film. Soil tolerance from-pH 2.5 to pH 11.0 inclusive
Premium grade manufactured in accordance with ENATS 12-23 Issue 2 : 2004
Various thicknesses of polyethylene available.
TEXT/COLOURS SIZE PART No. TEXT/COLOURS SIZE PART No.
CAUTION CAUTION CAUTIONWATER PIPE BELOW
CAUTION CAUTION CAUTIONFIBRE OPTIC CABLES
CAUTION CAUTION CAUTIONFOUL SEWER BELOW
CAUTION CAUTION CAUTIONGAS MAIN BELOW
CAUTION CAUTION CAUTIONSEWERAGE PUMPING MAIN BELOW
CAUTION CAUTION CAUTIONSTREET LIGHTING CABLE BELOW
CAUTION CAUTION CAUTIONSTREET LIGHTING CABLE BELOW
CAUTION CAUTION CAUTIONELECTRIC CABLE BELOW
CAUTION CAUTION CAUTIONGAS MAIN BELOW
CAUTION CAUTION CAUTIONSTREET LIGHTING CABLE BELOW
CAUTION CAUTION CAUTIONWATER PIPE BELOW
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
004126
002146
002467
002344
006168
005468
005444
004867
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
150mm x 0.1mm x 365mtrs
004805
002405
006045
004928
003662
005161
005482
PREMIUM GRADE
ECONOMY GRADE
150mm x 0.05mm x 365mtrs
150mm x 0.05mm x 365mtrs
150mm x 0.05mm x 365mtrs
150mm x 0.05mm x 365mtrs
004102
002047
002443
002320
150mm x 0.05mm x 365mtrs
150mm x 0.05mm x 365mtrs
150mm x 0.05mm x 365mtrs
150mm x 0.05mm x 365mtrs
004843
004782
006144
045006
CAUTION CAUTION CAUTIONROAD DUCT BELOW
CAUTION CAUTION CAUTIONTELEPHONE CABLE BELOW
CAUTION CAUTION CAUTIONTRAFFIC SIGNAL CABLE BELOW
FIN DRAIN
CAUTION•ELECTRIC CABLE BELOW
CAUTION CAUTION CAUTIONCCTV CABLE BELOW
CAUTION CAUTION CAUTIONOIL PIPELINE BELOW
CAUTION CAUTION CAUTIONFIBRE OPTIC CABLES
CAUTION CAUTION CAUTIONFOUL SEWER BELOW
CAUTION CAUTION CAUTIONSTREET LIGHTING CABLE BELOW
CAUTION CAUTION CAUTIONTELEPHONE CABLE BELOW
• Special manufacture available any colour size or language
Technical Specifications
Root Guard
8
Utilitnet™
Underground Warning Mesh
Utilinet™ underground warning mesh is an excellentwarning device for underground buried services. Thisbrightly coloured mesh has a middle strip that can beprinted with a warning message for easy recognitionon excavation. Manufactured and tested to BS EN12613:2001.
Manufactured from virgin homopolymer polypropylene
Custom printed texts can be manufactured to your requirements subject to minimum order quantities
Standard texts available ex-stock
Packed in a polythene bag forstorage and protection
Available in any size, colour or language to your specifications.
150mm x 365mtrs
150mm x 365mtrs
150mm x 365mtrs
150mm x 365mtrs
150mm x 365mtrs
PPH
PPH
PPH
PPH
PPH
003648
050925
050932
050949
050956
CAUTION - ELECTRIC CABLE BELOW
CAUTION - WATER MAIN BELOW
CAUTION - GAS MAIN BELOW
CAUTION - FOUL SEWER BELOW
CAUTION - FIBRE OPTIC CABLE BELOW
PRODUCT TEXT/COLOUR SIZE MATERIAL PART NO.
In-houselaboratory
crate test toconform to
BS EN 12613:2009
BS EN 12613:2009 is a European wide directive that specifies thewarning characteristics for all underground warning devices.This scope covers electric cables and pipelines containingpressurised or non-pressurised fluids.
Underground Warning mesh is manufactured to the EuropeanStandard and has been independently tested and approved. Ourown in-house crate test and laboratory ensure consistent qualityand standards are maintained to conform to BS EN 12613:2009.
Copies of test reports are available.
EUROPEAN STANDARD
Technical Specifications
Root Guard
9
Wavelay®
Detectable Tape
Wavelay® is a highly visible and detectable warning tape.Used with standard cable and pipe locators for the location ofnon-metallic pipes and un-energised cables. Wavelay is laidhalfway between the pipe or cable and the surface of thetrench during backfilling.
Used with standard cable and pipe locators for thelocation of non-metallic pipes and un-energised cables.Laid halfway between the pipe or cable and the surface ofthe trench during backfilling.
Rust free stainlesssteel tracer wires
Coloured tape withprinted message
Wires in constant contact with earth
Clear PE film
Other texts/colours manufactured to order
Unique design allows wires to stretch by over 25before breaking
Top ‘Printguard’ layer protects the wires and thewarning message.
Detectaccessories available for joining detectablewires
Available in sizes from 50mm – 300mm
Rolls available with side flanges for laying from aplough
• Special manufacture available in any colour, size, text orlanguage to your specifications
Technical SpecificationsTEXT/COLOUR SIZE PART NO.
150mm x 100m 015986CAUTION COMMUNICATIONSPOWER CABLE BELOW
10
DetectaccessoriesTo ensure a continuous signal along the mesh it is important to use our wire crimpsand crimping tool. This gives the join sufficient strength to cope with most backfills. If it is not installed correctly then the signal may not pass from join to join.
Technical SpecificationsPRODUCT QUANTITY PER PACK PART NO.
Crimping Tool 1 043385
Stainless Steel Wire Crimps 100 043347
Root Guard
Mesh manufactured to BS EN 12613:2009
Bagged for storage and protection
Various colours available
Crimps and crimping tool available
Bespoke texts manufactured to order
Sizes 100mm-500mm (subject to MOQ’s)
Detectamesh®
Detectable Mesh
Detectamesh® is a high strength coloured rot resistanthomopolymer polypropylene mesh incorporating a trace-able stainless steel wire or aluminium foil, andoverprinted with a warning message in black. Laid halfwaybetween the pipe or cable and the surface in theback-filled trench, Detectamesh® is used with standardpipe and cable locators for the location of non-metallicunderground buried services.
DetectaccessoriesTo ensure a continuous signal along the mesh it is important to use our wire crimpsand crimping tool. This gives the join sufficient strength to cope with most backfills. If it is not installed correctly then the signal may not pass from join to join.
Technical SpecificationsPRODUCT QUANTITY PER PACK PART NO.
Crimping Tool 1 043385
Stainless Steel Wire Crimps 100 043347
11
Printed Top Tape
Mesh Structure
Detectable Steel wire
• Special manufacture available any colour, size or language
STANDARD TEXTSTEXT/COLOUR SIZE PART NO. TEXT/COLOUR SIZE PART NO.
CAUTION-WATER MAIN BELOW
CAUTION-WATER MAIN BELOW
CAUTION - STORM WATER CULVERT BELOW
CAUTION-BURIED GAS PIPE
CAUTION•ELECTRIC CABLE BELOW
CAUTION-FIBRE OPTIC CABLES
RAW WATER MAIN BELOW
Caution: Sewer Below
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
016747 - (Wire)
016761 - (Ali/foil)
016846 - (Wire)
016167 - (Wire)
016181 - (Wire)
017263 - (Wire)
045969 - (Wire)
017508 - (Wire)
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
200mm x 100m
017584 - (Wire)
017607 - (Wire)
017621 - (Wire)
017645 - (Wire)
017683 - (Wire)
017669 - (Wire)
017126 - (Wire)
016082 - (Wire)
CAUTION-FIRE MAINS BELOW
CAUTION-SEWERAGE PUMPING MAIN BELOW
CAUTION-GRAVITY SEWER BELOW
CAUTION-PRESSURE SEWER BELOW
CAUTION-NON POTABLE WATER MAIN BELOW
CAUTION-FUEL PIPE BELOW
CAUTION-TELEPHONE CABLE BELOW
CAUTION-STREET LIGHTING CABLE BELOW
Root Guard
To ensure a continuous signal along the mesh it is important to use our ultra crimps andcrimping tool. This gives the join sufficient strength to cope with most back fills. If it is notinstalled correctly then the signal may not pass from join to join.
Ultra-strong®
Detectable Tape
A strip of detectable aluminium foil totallyencapsulated between a polyethylene base layer and aprinted polyethylene protective covering (patentNo.2231448).
Polyethylene sealing layer with printedwarning message (0.1mm)Aluminium Foil Detectable Laminate (0.1mm)
Base layer of polyethylene(0.45mm)
Aluminium Foil Detectable Marker Tape
Available in any colour & copy text Not less than 99.5% purity aluminium foil High tensile strength Totally encapsulated aluminium foil prevents corrosion Tensile strength - 50Kg/100mm width - 75Kg/150mm width Extended product life
A printed coloured plastic strip of detectable aluminiumfoil tape, permanently bonded between two layers of rotresistant plastic to prevent corrosion and increase itstensile strength.
Available in many colours.
All 50mm tapes are boxed in dispenser cartons. Easily located by direct connection Continuous metallic tracer element
Detectaccessories
PRODUCT QUANTITY PER PACK PART NO.
Crimping Tool 1 043385
Ultra Crimps 5 043361
Technical Specifications
12
Root Guard
PE Cable Protection Covers
Heavy duty, yet lightweight recycled polyethylenecable covers, incorporating a coloured printedpolyethylene warning tape laminated to the topsurface. Our environmentally friendly cable coversshould be laid over high voltage power cables orother buried services which require additionalprotection.
13
All cable covers are pre-drilled and supplied with a joiningpeg for easy installation. The linear length when joined isapproximately 960mm.
Other texts are available including fibre optic cables,electric cables, gas pipelines and water pipelines.
Specially printed texts and other sizes of cable cover canbe manufactured to order on request, subject to quantity.
High impact resistance, manufactured to BS 2484
Rot resistant
Lightweight, meaning low transportation and installation costs
Available from 6mm to 18mm thick
Special manufacture available
Technical Specifications
PRODUCT TEXT/COLOUR SIZE MATERIAL PART NO.
150mm x 6mm x 1m Recycled LDPE 019304
150mm x 12mm x 1m Recycled LDPE 019342
244mm x 12mm x 1m Recycled LDPE 019281
Water, Gas and Fibre Optic cable covers can be manufactured to order
Root Guard
TapeTile™
Protection Warning Mesh
14
Our cable and pipe TapeTile™, offers far greaterprotection than ordinary warning tape. TapeTile™ is veryeconomically priced and installation time is greatly re-duced as it is easy to transport and simple to unroll. Var-ious thicknesses are available with colours and texts toyour requirements.
Heavy duty recycled low density polyethylene sheetwith a warning tape laminated on oneside, printedin black.
More protection than a standard warning tape
Reduced installation time
Manufactured in accordance with ENATS 12-23 Issue : 2004
Various thicknesses available from 1mm upwards
Tensile strength - >10N/mm2
Elongation at Break - >300%
200mm x 2.5mm x 40m150mm x 2.5mm x 40m
018444018420
TEXT/COLOURS PART NO.SIZE
Technical Specifications
Technical Specifications
UPVC Cable CoversRigid UPVC cable covers with or without interlockingfasteners, profiled to provide good protection abovecables or pipelines, against the high impact ofshovels or picks.
Manufactured in any colour with a warning messageto identify the buried service, printed in black to yourrequirements.
Permanent non-fading, colour resistant to chemical change.
Density is higher than water, so that they can be used easily in water-logged ground.
Lightweight, meaning low transportation and installation costs
Other thicknesses and sizes available on request.
Width (mm) 120 150 160 180 200 220 240 250 300Thickness(mm) 2 2 2 2 2 2 2 2 2Length (m) 1 1 1 1 1 1 1 1 1Weight/Cover(g) 350 450 480 520 575 635 710 720 880Pallet Qty 2000 2000 2000 2000 1500 1500 1500 1500 1500
SIZES AVAILABLE
Root Guard
Maxigrid™
Utility Protection Mesh
Maxigrid™ Utility Protection Mesh is manufactured fromhigh density polyethylene and offers excellent protectionto buried services. It is usually supplied in roll form inlengths of 50 metres.
High impact resistance
Each roll is bagged for protection
Average tensile strength of filament 100newtons per filament
Excellent chemical resistance to - Sulphuric Acid, Hydrochloric Acid, Ammonia, Sodium Hydroxide, Volatile Oil, Sea Water, Acetone, Toluene and Benzene
An underground warning tape can be laminated to thetop surface if required. This warning tape can be printedwith your unique warning message and contact details.
Technical Specifications
400mm x 3mm x 50m
600mm x 3mm x 50m
1500mm x 3mm x 50m
Orange
Yellow
Red
017720
015900
044351
PRODUCT & COLOUR SIZE COLOUR PART NO.
Root Guard
15
Luran-S Snap fit SignsUtility Marker Plates
Our marker plates are manufactured from LURAN-Splastic, and offer an efficient, economic and versatilesystem to mark fire hydrants, water valves, sewers,gas valves and street lighting columns in a clear andcoherent format.
Made from non-ageing, non-fadingLURAN-S plastic
Manufactured to BS3251
Information is displayed by using numeric/lettered snap fit inserts
Inserts simply clip and lock into the plate
Plates can be fitted directly onto walls, fences andlamp posts, or alternatively mounted onto concrete,aluminium or fibre glass posts, all available from stock
Aluminium and Plastic backing plates are alsoavailable for additional security
Plates can be specially hot-stamped with texts &symbols to display additional information
16
Identification SignsID Signage Plates
Plastic Screen Printed SignsManufactured to any size, colour or text as required
Manufactured from durable PMMA foam
Printed in multiple colours to your design
Stable solutions in many colours and formats
Printed areas are coated to extend shelf life
Weather and UV resistant
Fixing holes can be added to your requirements
Highly resistant inscription suitable for indoorand outdoor applications
Can be designed toand shaped to fit anybespoke profile
Can be customised toyour size or colour
UV stabilised andweather resistant
Signs are coloured rightthrough limiting fading
InjectionMoulded Signs
Laser Engraved Signs
TraffolyteEngravedSigns
Text and symbols are engravedonto a different coloured co-extruded plastic
Weather and chemical resistant– suitable for external use
Extremely accurate engravingallows the use of barcode systems
Available in many sizesand colours
Manufactured from multi-coloured traffolyte plastic
Available in a variety of sizes and colours
Low order quantity
Accurate engraving forbespoke signs andschematic drawings
17
A plastic plate used to mark the correct level or position of the track.The plate is attached to a fixed object such as a platform or abridge.
Each plate is manufactured from a durable plastic ’Luran S’ andis supplied with a red/green block & slider and spaces for securitysnap fit inserts.
Plate size: 140mm x 200mm
We can also provide steel, aluminium and plastic backing platesfor secure fitting.
Each plate requires 12 x Snap fit 40mm inserts and 4 x 10minserts which we can provide at an extra cost.
Aluminium Marker PostsID Signage
A high quality aluminium post with screw fixing channel,bituminised end, earth anchor and plastic top sealer. Foradditional security an aluminium backing plate isavailable, which can also be used for mounting platesonto fences & lamp posts by either screw or strap &buckle fixing.
Screwanchor
Earth anchor
Lightweight and easy totransport
Tough and durable
Rust free and corrosionresistant
Screw and earth anchorsavailable
Other sizes available.Posts can also be finished in blue or yellow
Complete system available - easy to install
Aluminium Post
Aluminium Backing Plates
48mm x 1.5m high
205mm x 180mm
034703
034628
PRODUCT SIZE PART No.
Technical Specifications
Railway Datum Gauges
18
A full range of product data sheets, case studies and projectinformation request forms are available from Terram technicalsupport or as downloads from the Terram website. www.terram.com.
TECHNICAL SUPPORT
The information contained herein is, to the best of ourknowledge, accurate in all material respects. However, sincethe circumstances and conditions in which such informationand the products mentioned herein can be used may varyand are beyond our control, no representation or warranty,express or implied, of any nature whatsoever is or will be
made and no responsibility or liability is or will be acceptedby us, any of our affiliates or our or their respective directors,officers, employees or agents in relation to the accuracy orcompleteness or use of the information contained herein orany such products and any such liability is expressly disclaimed.
DISCLAIMER
Fiberweb Geosynthetics LtdBlackwater Trading Estate
The Causeway, MaldonEssex CM9 4GGUnited Kingdom
tel +44 (0) 1621 874200fax +44 (0) 1621 874299 email info@terram.com
www.terram.com
FM 22730