Permanently Charging the Electroscope By conduction Using a Negatively Charged Rod title.

Post on 15-Dec-2015

239 views 1 download

Tags:

Transcript of Permanently Charging the Electroscope By conduction Using a Negatively Charged Rod title.

Permanently Charging the

Electroscope By conduction Using

a Negatively Charged Rod

title

Start with neutral electroscopeScene 1

Positively Charged Knob

Negatively charged leaves

Like charges

repel

Electrons from knob are repelleddownward

Scene 2

Click here to see last animation

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

Negatively charged leaves

Like charges

repel

NegativelyCharged knob

Rod is stillnegative

Once contact is made, electrons are transferred from the charged rod to the knob of the electro-scope. Charging by contact is called conduction.

Scene 3

Click here to see last animation

Negatively Charged Electroscope Scene 4

Click here to see last animation

Negatively charged leaves

Negatively charged knob

Negatively Charged Electroscope Was the rod usedpositively charged ornegatively charged?

The rod used was negatively charged.

What is the final charge onthe electroscope when chargedby conduction with a negativelycharged rod?

The final charge on the electroscopewhen charged by conduction witha negatively charged rod is negative.

Make a note of this!

Negatively Charged Electroscope

To observe electroscope being grounded, click here.

To start over, click here.

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

To neutralize, connect a wire from the electroscope to the ground:

Extra electrons leave theelectroscopeand gointo the ground

This is called

grounding.

Scene 5

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Finally remove the ground wire:

Neutral Electroscope

Click the mouse or hit the down arrow to start over.

Scene 6Finally remove the ground wire: