Transcript of Pengukuran Noise Ahmad Suudi, S.T., M.T.. 2 Noise Measurement Significant variability in noises from...
- Slide 1
- Pengukuran Noise Ahmad Suudi, S.T., M.T.
- Slide 2
- 2 Noise Measurement Significant variability in noises from
transportation sources L p : noise level at a particular receptor
that is exceeded p percent of the time i.e. Noise that exceeds 100
dB 90% of the time A-weighted noise level (equivalent irritation
level has to do with mix of frequencies DNL (day/night level
weights nighttime noises)
- Slide 3
- 3 http://www.nonoise.org/library/highway/policy.htm#II What are
L 10 and L eq ? The equivalent sound level is the steady- state,
A-weighted sound level which contains the same amount of acoustic
energy as the actual time-varying, A- weighted sound level over a
specified period of time. If the time period is 1 hour, the
descriptor is the hourly equivalent sound level, Leq(h), which is
widely used by SHAs as a descriptor of traffic noise. An additional
descriptor, which is sometimes used, is the L10. This is simply the
A-weighted sound level that is exceeded 10 percent of the
time.
- Slide 4
- 4 http://www.nonoise.org/library/highway/traffic/traffic.htm
What are L 10 and L eq ? L 10 is usually about 3dB greater than L
eq
- Slide 5
- 5 Mathematical Model Simple model L 50 = 68 + 8.5 log V 20 log
D (dB) Where: V = traffic volume (veh/hour) D = distance from
traffic to observer in feet Also use nomographs, relate noise to
speed, volume, distance, etc.
- Slide 6
- 6 State of the Art is FHWAs Traffic Noise Model (TNM) Modeling
of five standard vehicle types, including automobiles, medium
trucks, heavy trucks, buses, and motorcycles, as well as
user-defined vehicles. Modeling of both constant-flow and
interrupted-flow traffic using a 1994/1995 field- measured data
base. Modeling of the effects of different pavement types, as well
as the effects of graded roadways. Sound level computations based
on a one-third octave-band data base and algorithms.
Graphically-interactive noise barrier design and optimization.
Attenuation over/through rows of buildings and dense vegetation.
Multiple diffraction analysis. Parallel barrier analysis. Contour
analysis, including sound level contours, barrier insertion loss
contours, and sound- level difference contours.
- Slide 7
- 7 2280 120 60 Problem: Find dBA L 10 500 ft from road 2 lane
road 2400 vehicles per hour 5 percent trucks 60 mph #cars
=.95x2400=2280 Example Problem
- Slide 8
- 8 Problem: Find dBA L 10 at 500 ft From a 2 lane road carrying:
2400 vehicles per hour 5 percent trucks, at 60 mph cars
=.95x2400=2280 L 50 dBA for cars at 100 = 68 dBA
- Slide 9
- 9 68 2280 120 60
- Slide 10
- 10 Problem: Find dBA L 10 at 500 ft From a 2 lane road
carrying: 2400 vehicles per hour 5 percent trucks, at 60 mph trucks
=.05x2400=120 L 50 dBA for trucks at 100 = 62 dBA 20 30 40 50 60
70
- Slide 11
- 11 6862 2280 120 60
- Slide 12
- 12 Problem: Find dBA L 10 at 500 ft From a 2 lane road
carrying: 2400 vehicles per hour 5 percent trucks, at 60 mph O-ELD
= 500
- Slide 13
- 13 Problem: Find dBA L 10 at 500 ft From a road carrying: 2400
vehicles per hour 5 percent trucks, at 60 mph Adjustment from 100ft
ref = -10 dB
- Slide 14
- 14 6862 -10 2280 120 60
- Slide 15
- 15 Problem: Find dBA L 10 at 500 ft From a road carrying: 2400
vehicles per hour 5 percent trucks, at 60 mph (vol/speed)*ELD =
19,000 for cars, 1,000 for trucks L 10 - L 50 = 2 dBA cars, 6.5 dBA
trucks
- Slide 16
- 16 6862 -10 2 6.5 6058.5 6058.5 2280 120 60
- Slide 17
- 17 Adding 2 sources Heavy trucks 58.5 dB Passenger vehicles 60
dB
- Slide 18
- 18 Difference = 60 58.5 = 1.5 Add 2.3 dB to higher 60 + 2.3 =
62.3 dB due to both sources
- Slide 19
- 19 6862 -10 2 6.5 6058.5 6058.5 62.3 2280 120 60
- Slide 20
- 20
- Slide 21
- 21
- Slide 22
- 22
- Slide 23
- 23 Other Adjustments Grade (trucks) +/- 3-4%= +2 +/- 5-6% = +3
+/- >7 = +5 Surface very smooth = -5 (auto only) very rough = +5
(auto, or truck>60mph) Interrupted flow (L 10 ) auto = +2 Truck=
+4 Foliage -5 for each 100 >15 -10 max Rows of houses -5 for
each -10 max
- Slide 24
- 24 Noise Barriers
- Slide 25 C
Source:http://www.urbislighting.com/uap1.html">
- 25 Noise Barriers (how they work) Noise is "diffracted" over
the barrier, this increases the distance it travel to the listener,
thus decreasing the noise A + B > C
Source:http://www.urbislighting.com/uap1.html
- Slide 26
- 26 Source: FHWA, Keeping the Noise Down, Highway Traffic Noise
Barriers
- Slide 27
- 27 Noise Barriers (how they work) Noise is also reflected
and/or absorbed Source:http://www.urbislighting.com/uap1.html
- Slide 28
- 28 http://www.nonoise.org/library/highway/traffic/traffic.htm
Possible barriers
- Slide 29
- 29
http://www.nonoise.org/library/highway/traffic/traffic.htm
- Slide 30
- 30 Source: FHWA, Keeping the Noise Down, Highway Traffic Noise
Barriers
- Slide 31
- 31 Source: FHWA, Keeping the Noise Down, Highway Traffic Noise
Barriers
- Slide 32
- 32 Source: FHWA, Keeping the Noise Down, Highway Traffic Noise
Barriers
- Slide 33
- 33 Source: FHWA, Keeping the Noise Down, Highway Traffic Noise
Barriers
- Slide 34
- 34 Source: FHWA, Keeping the Noise Down, Highway Traffic Noise
Barriers
- Slide 35
- 35 Source: FHWA, Keeping the Noise Down, Highway Traffic Noise
Barriers