Post on 12-Aug-2018
Torrens Timber Truss Bridges
www.landmarkpro.com.au | ph: 1300 768 230
BRIDGES | Range Specification Sheet 001
K1101 K1101
Landmark's timber truss pedestrian bridges offer a practical, safe, and economical solution at shorter spans, or where multiple spans are a viable option. The simple design, durable materials and pre-fabricated components allows for rapid installation in remote or difficult to access areas.
Cost effective solutionsTimber Truss foot bridges are not designed to withstand flood loadings. Please refer to Landmark K1103 Condamine bridges for flood loading alternatives.
Torrens Timber Truss Bridges
www.landmarkpro.com.au | ph: 1300 768 230
BRIDGES | Range Specification Sheet 001
K1101 K1101
Landmark's timber truss pedestrian bridges offer a practical, safe, and economical solution at shorter spans, or where multiple spans are a viable option. The simple design, durable materials and pre-fabricated components allows for rapid installation in remote or difficult to access areas.
Cost effective solutionsTimber Truss foot bridges are not designed to withstand flood loadings. Please refer to Landmark K1103 Condamine bridges for flood loading alternatives.
K1101 SERIES - Torrens Timber Truss BridgesConvenient, factory-built construction
K1101
STANDARD SPAN LIMITS
OPTIONSFEATURES
• Stainless steel hardware upgrade together with timber outrigger saddles for corrosive environments
• Hot-dip galvanised saddles can be powder coated or two pack painted to selected colour
• Selection of barrier panels in timber or steel
• Choose from a range of available decking options, including hardwood or composite materials
• Timber components are available in a range of factory-stained colours
• Landmark timber truss foot bridges offer a safe, economical and aesthetically pleasing solution where short spans are viable
• Components can be specifically packaged to be carried by hand into remote sites
06 08 10 12 14 16 18 29 22 24 26 28 30 32 34 36 38 40 70+STANDARD WIDTH (mm)
CLEAR SPAN (Standard Multiple x 2.0 Metres)K1101 TORRENS
1500
2000
2500
K1101
All Landmark Structures are supplied ready-to-install, installation instructions, Building Approval Drawings and Engineers Certification (where required), and carry our 10 year Structural Warranty.
including all components and hardware, step-by-step
Landmark reserves the right to change information without notice. Please check our website for any updates. www.landmarkpro.com.au
K1101 SERIES - Torrens Timber Truss BridgesConvenient, factory-built construction
K1101
STANDARD SPAN LIMITS
OPTIONSFEATURES
• Stainless steel hardware upgrade together with timber outrigger saddles for corrosive environments
• Hot-dip galvanised saddles can be powder coated or two pack painted to selected colour
• Selection of barrier panels in timber or steel
• Choose from a range of available decking options, including hardwood or composite materials
• Timber components are available in a range of factory-stained colours
• Landmark timber truss foot bridges offer a safe, economical and aesthetically pleasing solution where short spans are viable
• Components can be specifically packaged to be carried by hand into remote sites
06 08 10 12 14 16 18 29 22 24 26 28 30 32 34 36 38 40 70+STANDARD WIDTH (mm)
CLEAR SPAN (Standard Multiple x 2.0 Metres)K1101 TORRENS
1500
2000
2500
K1101
All Landmark Structures are supplied ready-to-install, installation instructions, Building Approval Drawings and Engineers Certification (where required), and carry our 10 year Structural Warranty.
including all components and hardware, step-by-step
Landmark reserves the right to change information without notice. Please check our website for any updates. www.landmarkpro.com.au
Condamine I-Beam Bridges
www.landmarkpro.com.au | ph: 1300 768 230
BRIDGES | Range Specification Sheet 002
K1103 K1103
Condamine bridges offer a highly versatile, adaptable pedestrian and light vehicle option, and is available with a wide range of standard and custom handrail and finish options.
Decorative alternativesI-Beam construction allows Condamine foot bridges to be engineered to withstand cross flood loadings, and handrails to be decorative as well as functional.
Condamine I-Beam Bridges
www.landmarkpro.com.au | ph: 1300 768 230
BRIDGES | Range Specification Sheet 002
K1103 K1103
Condamine bridges offer a highly versatile, adaptable pedestrian and light vehicle option, and is available with a wide range of standard and custom handrail and finish options.
Decorative alternativesI-Beam construction allows Condamine foot bridges to be engineered to withstand cross flood loadings, and handrails to be decorative as well as functional.
K1103 SERIES - Condamine I-Beam BridgesConvenient, factory-built construction
K1103
STANDARD SPAN LIMITS
OPTIONSFEATURES
06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 70+STANDARD WIDTH (mm)
CLEAR SPAN (Standard Multiple x 2.0 Metres)K1103 CONDAMINE
1500
2000
2500
Modified | K1103
• Condamine pedestrian bridges can be engineered to withstand cross-flood loadings.
• Can be engineered to accommodate light vehicle loading
• I-beam foot bridges can accommodate flat, cranked, or curved design
• Available in durable materials for vandalism-prone areas
• Precision manufactured in kit form and supplied flat-packed for fast, simple installation
• Engineered to 5kPa loading. Design to 3.0kPa As1170 SAA Loading Code available.
• Hot-dip galvanised steel beams can be two-pack painted for added protection and aesthetic variety.
• Extensive and customisable range of hand rail and barrier panels available.
• Wide range of decking options, including timber, steel, concrete, composite, or recycled materials
All Landmark Structures are supplied ready-to-install, installation instructions, Building Approval Drawings and Engineers Certification (where required), and carry our 10 year Structural Warranty.
including all components and hardware, step-by-step
Landmark reserves the right to change information without notice. Please check our website for any updates. www.landmarkpro.com.au
K1103 SERIES - Condamine I-Beam BridgesConvenient, factory-built construction
K1103
STANDARD SPAN LIMITS
OPTIONSFEATURES
06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 70+STANDARD WIDTH (mm)
CLEAR SPAN (Standard Multiple x 2.0 Metres)K1103 CONDAMINE
1500
2000
2500
Modified | K1103
• Condamine pedestrian bridges can be engineered to withstand cross-flood loadings.
• Can be engineered to accommodate light vehicle loading
• I-beam foot bridges can accommodate flat, cranked, or curved design
• Available in durable materials for vandalism-prone areas
• Precision manufactured in kit form and supplied flat-packed for fast, simple installation
• Engineered to 5kPa loading. Design to 3.0kPa As1170 SAA Loading Code available.
• Hot-dip galvanised steel beams can be two-pack painted for added protection and aesthetic variety.
• Extensive and customisable range of hand rail and barrier panels available.
• Wide range of decking options, including timber, steel, concrete, composite, or recycled materials
All Landmark Structures are supplied ready-to-install, installation instructions, Building Approval Drawings and Engineers Certification (where required), and carry our 10 year Structural Warranty.
including all components and hardware, step-by-step
Landmark reserves the right to change information without notice. Please check our website for any updates. www.landmarkpro.com.au
PML Aluminium Bridges
Light weight | Highly corrosion resistant | Minimal long-term maintenanceLandmark Products Ltd and PML GmbH have aligned in a partnership to bring to the Australian market pedestrian bridges which incorporate world leading German design and engineering, capable of clear spans up to 70 metres.PML have been successfully delivering aluminium bridge
projects around the world for more than 15 years. Combined with Landmark’s more than 20 years experience in pedestrian access infrastructure projects in Australia and abroad, your project will be in the hands of a truly dynamic and experienced partnership.
www. landmarkpro.com.au | ph: 1300 768 230
BRIDGES | Range Specification Sheet 004
K1104 Series - PML Aluminium Bridges
K1104
STANDARD SPAN LIMITS
K1104 - PML ALUMINIUM CLEAR SPAN
The use of aluminium in pedestrian bridge construction significantly reduces long term maintenance costs. Light weight and highly corrosion resistant, aluminium is also an ideal material for use in coastal and other corrosive locations, or difficult or environmentally sensitive sites where access requires a light weight solution.European studies have proven that aluminium structures are price competitivewhen taking into account the savings in installation and maintenance - orwholeof life cost - compared to traditional
materials which require ongoing maintenance. Using superior engineering design and proprietary components, PML has been able to reduce the material content of their foot bridges while maintaining the required strength.Due to its light weight and proprietary components, installing a PML Aluminiumbridge is typically a very quick process, with associated benefits includingreduced road or rail closure times; minimal disruption to the environment and thepublic; and significantly reduced costs.
Cutting edge aluminium engineering
K1104
L-System
B-System
SL-System
R-System
K1105
Murray Steel Truss Bridges
www.landmarkpro.com.au | ph: 1300 768 230
BRIDGES | Range Specification Sheet 003
K1105
Murray steel truss pedestrian bridges offer a strong, lightweight, and versatile solution where longer bridge spans are required.
Hot-dip galvanised components are flat-packed for ease of transport, allowing for cost effective installation in remote or difficult sites.
Exceptional design-lifeTruss bridges are not designed to withstand cross flood loading. Please refer to Landmark K1103 Condamine bridges for flood loading alternatives.
K1105
Murray Steel Truss Bridges
www.landmarkpro.com.au | ph: 1300 768 230
BRIDGES | Range Specification Sheet 003
K1105
Murray steel truss pedestrian bridges offer a strong, lightweight, and versatile solution where longer bridge spans are required.
Hot-dip galvanised components are flat-packed for ease of transport, allowing for cost effective installation in remote or difficult sites.
Exceptional design-lifeTruss bridges are not designed to withstand cross flood loading. Please refer to Landmark K1103 Condamine bridges for flood loading alternatives.
K1105 SERIES - Murray Steel Truss BridgesConvenient, factory-built construction
K1105
STANDARD SPAN LIMITS
OPTIONSFEATURES
• Hot-dip galvanised steel trusses can be two-pack painted for added corrosion protection or aesthetic variety.
• Steel barrier panels can be two pack painted or powder coated to a selected colour
• A selection of standard barrier panels is available
• Choose from a wide range of decking options including timber, steel, concrete, composite, or recycled materials.
• Truss foot bridges can be engineered in cranked, curved or flat design
• Murray foot bridges are strong, durable and versatile, with an exceptional design life.
• Ideal for larger spans and vandalism prone-areas.
• Can be engineered to accommodate light vehicle loadings.
06 08 10 12 14 16 18 29 22 24 26 28 30 32 34 36 38 40 70+STANDARD WIDTH (mm)
CLEAR SPAN (Standard Multiple x 2.0 Metres)K1105 MURRAY
1500
2000
2500
Custom | K1105
All Landmark Structures are supplied ready-to-install, installation instructions, Building Approval Drawings and Engineers Certification (where required), and carry our 10 year Structural Warranty.
including all components and hardware, step-by-step
Landmark reserves the right to change information without notice. Please check our website for any updates. www.landmarkpro.com.au
K1105 SERIES - Murray Steel Truss BridgesConvenient, factory-built construction
K1105
STANDARD SPAN LIMITS
OPTIONSFEATURES
• Hot-dip galvanised steel trusses can be two-pack painted for added corrosion protection or aesthetic variety.
• Steel barrier panels can be two pack painted or powder coated to a selected colour
• A selection of standard barrier panels is available
• Choose from a wide range of decking options including timber, steel, concrete, composite, or recycled materials.
• Truss foot bridges can be engineered in cranked, curved or flat design
• Murray foot bridges are strong, durable and versatile, with an exceptional design life.
• Ideal for larger spans and vandalism prone-areas.
• Can be engineered to accommodate light vehicle loadings.
06 08 10 12 14 16 18 29 22 24 26 28 30 32 34 36 38 40 70+STANDARD WIDTH (mm)
CLEAR SPAN (Standard Multiple x 2.0 Metres)K1105 MURRAY
1500
2000
2500
Custom | K1105
All Landmark Structures are supplied ready-to-install, installation instructions, Building Approval Drawings and Engineers Certification (where required), and carry our 10 year Structural Warranty.
including all components and hardware, step-by-step
Landmark reserves the right to change information without notice. Please check our website for any updates. www.landmarkpro.com.au
landmarkpro.com.au 1300 768 230
Pedestrian Bridges - Extra Rear Page 1.indd 1 4/03/2014 7:48 pm
landmarkpro.com.au 1300 768 230
Pedestrian Bridges - Extra Rear Page 2.indd 1 4/03/2014 7:47 pm