Post on 25-Apr-2018
www.As
AGEN
Providexcellmaintthe idindustconveintern
MODEL
NUMBER
SPS5930
SPS6011
SPS5975
SPS5936
SPS5933
strodyneTDI.
NCY/ COMPL
EN61000‐4
Severity Lev
EN61000‐4
SEMI F47‐0
11kW Load
EMI: Desig
2004 with e
UL60950‐1,
EN60950‐1
IEC60950‐1
ding high opent reliability
tainability; Lieal choice fotrial and milierter featuresnational pow
PART N
‐1‐LF T1001
‐1‐LF T100
5‐LF T100
6‐LF T100
3‐LF T100
T10
com | +1 908
LIANCE
‐4 1995 Elect
vel 3
‐5 1995 Surge
0706 ‐ Criteria
)
gned to meet
external filter
, 2nd Edition
/A12:2011
1, 2nd Edition
erating efficy, compact siquaBladeTM or high poweitary applicas, automaticer input.
NUMBER
103091‐1‐LF
0108057‐LF
0104286‐LF
0103270‐LF
0103381‐LF
00108634
* Consult facto
8‐850‐5088
trical Fast Tra
e ‐ Severity Le
a A (Operating
CISPR 11 Clas
r (consult fact
, CE Marked
ciency along size, and easpower supper DC systemtions. The
c load sharin
DESCRIPTION
LiquaBladeTM (0‐60V Outpu
LiquaBladeTM (0‐120V Outp
LiquaBladeTM (0‐180V Outp
LiquaBladeTM
LiquaBladeTM Controller
LiquaBladeTM USB Connecti
ory for other mo
nsient/Burst
evel 4
g at less than
ss A Group 1
tory)
(LVD)
with sy
plies are ms in
ng, and
PSUut)
PSU put)
PSU put)
Shelf
Host
CANbus to ion Kit del specifications
This documaccepts n
INPU
Input
Input
Inrus
Powe
Efficie
Harm
Disto
S
‐
s
ment is believed tono responsibility f
UT SPECIFICA
t Voltage
t Current
sh Current
er Factor
ency
monic
ortions
SEMI‐F47
DC Outputs
(Adjustable
Alarm Outp
CanBus Con
Constant Vo
Power Cont
High Efficie
Liquid Coole
compatible
Blind Mate/
High Reliab
1U / 19” Ra
Parallel / Se
Designed to
Full PFC ‐ H
Low Input C
SPECIAL FEA
© o be correct at timfor consequences f
Speculations ar
ATIONS
380-480 VoltsDelta
31 Amps RMS Less than 80A >0.93>92% at 55VDLess than 10%load and less t
s Options: 0‐6
e)
puts
ntrols
oltage / Cons
trol Modes
ncy: 92% pow
ed – Water, D
/Hot Swappa
ility: 100% H
ack Compatib
eries compati
o NAVSO P‐36
igh Power Fa
Current THD
AUTRES
Copyright 2015me of publication afrom printing errore subject to chan
s AC, +/-10%, 4
maximum at lowpeak
DC/190A DC Out% total harmonic than 5% for each
60V, 0‐120V,
tant Current
wer conversio
DI Water, WE
ble
HASS Tested
le
ble
641A
ctor –
, Astrodyne, Incnd Astrodyne, Incors or inaccuraciesge without notice
7-63Hz, 3 Phase
w line
tputdistortion at full
h harmonic
0‐180V
/ Constant
on efficiency
G
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 2 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
* Consult factory for other model specifications
PROTECTION FEATURES
Output Over-voltage: Output protected with over-voltage shutdown circuitry. Output will latch off if output voltage reaches 63V (+/-1V)
Output over-current: Automatic electronic current limit circuitry Over-temperature: Internal thermal monitoring circuits shut down unit if temperatures exceed safe limits. Unit will automatically
power back on after cool down.
ALARMS AND CONTROLS
AC Good/ DC Good/Fault: Multi-colored front panel LED Control & Admin: All alarms and controls available via CAN Bus connectors at back of unit. Signals include: Voltage Command,
Current Command, AC Input OK, DC Output Enabled, Temperature Fault, DC Output Voltage, DC Output Current, Sub-Assemblies OK (1- 3)
OUTPUT SPECIFICATIONS T100103091‐1‐LF*
Voltage Adjustable from 5‐60VDC can also be set to 0V ; Constant Voltage Mode: +/-1.5V 0‐60VDC
Current Can be programmed in constant current mode from 0‐360A; Constant Current Mode: +/-0.5%
360 Amps Maximum
Power Programmable; Constant Power Mode: +/-1% 16,500W Max
Line Regulation Less than 1%
Load Regulation 10%Load - Full load 1%
Ripple and Noise 20MHz BW Less than 300mV p-p Parallel Use May be paralleled with other like units for increased output power. Active “or-ing” MOSFETTemperature Coeff. Average over 8 hours, (after 30 minute warm up) <50ppm/oC of set pointTurn On Time 2 Seconds Max
ENVIRONMENTAL CONDITIONS
Cooling Water cooled – water temperature range from 10°C to 55°C (Consult factory for other temperatures or coolants)
Flow Rate: 1.5 – 2.5 gallons per minute
Pressure drop: pressure at 2gpm <10psi Maximum pressure: 60psi continuous
Ambient Temperature +5 to +50°C
Storage Temperature ‐40 to +85°C (coolant lines purged)
Humidity 0 to 95% non‐condensing, operating and storage
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 3 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
ELECTRICAL BLOCK DIAGRAM
MECHANICAL DETAILS
MECHANICAL
Dimensions (Module) 1.75” x 17.5” x 31.2” (44 x 444.5 x 793mm)
Connector Blind mate Connectors for AC Input and control. Heavy duty bus bar blades (blind mate) for DC Output).
Blind mate, drip‐proof connections for coolant.
Altitude Operating: ‐200 to +10,000 ft
Transport/Storage: 30,000 ft
Vibration IEC 60068‐2‐64 Spectrum A.1: Transportation Category 2 (Water, land, hard conditions, Railcar with hard
suspension trailers) 30min/axis on all three axes MIL‐STD 810G Category 7 Figure 514.6 C‐5: Cargo on jet
aircrafts, General Exposure) 10 mins/axis on all three axes
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 4 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
MODULE DRAWING:
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 5 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
MOUNTING SHELF:
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 6 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
MODULE MOUNTED INTO SHELF:
www.As
strodyneTDI.
ELECTRIC
Output Cur
com | +1 908
CAL AND E
rrent / Power v
8‐850‐5088
ENVIRONME
versus Coolant
ENTAL PERF
t Temperature
This documaccepts n
FORMANCE
ment is believed tono responsibility f
E DETAILS
LiquaBl
© o be correct at timor consequences f
Speculations ar
ladeTM |
Copyright 2015me of publication afrom printing errore subject to chan
16.5kW
, Astrodyne, Incnd Astrodyne, Incors or inaccuraciesge without notice
PAGE 7 of 15
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 8 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
ELECTRICAL AND ENVIRONMENTAL PERFORMANCE DETAILS
Coolant Flow Characteristics:
Front Panel LED’s:
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 9 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
TYPICAL PERFORMANCE DATA:
EFFICIENCY:
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 10 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
TYPICAL PERFORMANCE DATA:
POWER FACTOR:
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 11 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
TYPICAL PERFORMANCE DATA:
OUTPUT RIPPLE AT FULL RATED POWER:
LiquaBladeTM |16.5kW
© Copyright 2015, Astrodyne, Inc This document is believed to be correct at time of publication and Astrodyne, Inc accepts no responsibility for consequences from printing errors or inaccuracies
Speculations are subject to change without notice
PAGE 12 of 15 www.AstrodyneTDI.com | +1 908‐850‐5088
TYPICAL PERFORMANCE DATA:
CONSTANT VOLTAGE OUTPUT TRANSIENT RESPONSE: Output Current change from 135A to 270A
Output Current change from 270A to 135A
Output Voltage (Blue)
Output Current (Green)
www.AsstrodyneTDI.
Syste
•
•
•
•
•
•
•
•
•
com | +1 908
em Leve
Up to 50AC PoweDC PowCoolant Highest Control 380V / 4PrecisioHot Swa
8‐850‐5088
el Soluti
00kW er Distriber DistriDistribuDensity System –480VAC
on controappable M
ons -
bution &bution &
ution & MLiquid C– 1U Higdirect in
ol of voltaModules
This documaccepts n
& Manage& ManageManagemCooling Sgh LiquaRput age and – Low M
ment is believed tono responsibility f
ement ement
ment System RackTM Co
currentMTTR and
LiquaBl
© o be correct at timor consequences f
Speculations ar
ontroller
d Maxim
ladeTM |
Copyright 2015me of publication afrom printing errore subject to chan
r
um Up T
16.5kW
, Astrodyne, Incnd Astrodyne, Incors or inaccuraciesge without notice
PAGE 13 of 15
Time