Post on 06-Jul-2018
8/17/2019 PC-021.pdf
1/1
CAST LABORATORIES PTE LTD
53 TAMPINES INDUSTRIAL AVENUE 5 SINGAPORE 528636
Business Reg No
CONCRETE CUBE TEST REPORT
THE PINES HOTEL @ STEVENS ROAD
EVAN LIM & CO PTE LTD
Project:
Grade of Concrete:
198100052N
DATE: 21/04/2015
TEST METHOD: Density
Tel: 6260 6190 Fax: 6260 4257
Website: www.castlab.com.sg
SS78 Part A16:1987
CUBE DETAILS AS FURNISHED BY COMPANY: JOB NO: E07/93/64
Cement/Admixture (If Any):
Supplier:
PBFC
Compressive Strength
- (- )
Structural Element Cast: PC-78
PAGE: 1 OF 1
SS78 Part A14:1987 (by calculation volume method)
40
SAMPLE MARK
GIVEN
SLUMP
(mm)
DIMENSION
(mm)
DENSITY
AS RECEIVED
(Kg/m3)
MAX
LOAD
(kN)
COMP
STRENGTH
(N/mm2)REMARKS
PC-021-1 130 150x150x150 2390 792.6 35.0
PC-021-2 130 150x150x150 2390 752.5 33.5
DATE RECEIVED: DATE CAST: DATE TEST: AGE AT TEST: DAY(S)11/04/2015 18/04/2015 715/04/2015
CAST Laboratories Pte LtdThis Report is issued under the following conditions:
WITNESSED BY:
1. This is a Test Report and not a CAST Laboratories Certificate of Quality. It
only applies to the sample of the specific product given at the time of its
testing.
2. CAST Laboratories testing does not constitute a recommendation for or
endorsement of, the product or material tested.
3. The report shall not be reproduced in part or full unless approval in writing
has been given by CAST Laboratories.
4. CAST Laboratories agrees to use reasonable diligence in the manner of
performing the test but no warranties are given and none shall be implied
directly or indirectly relating to CAST Laboratories services, test results or
facilities. In no event shall CAST Laboratories be liable for collateral, special or
consequential damage.
*Measured dimension (> ±1% of nominal)
C.C.
TESTED BY:ORIGINAL Raj
HAMIDON BIN MOSTAFFAR
ENGINEER
The results reported herein have been performed in accordance with the laboratory's terms of accreditation under the Singapore Accreditation Council - Singapore Laboratory Accreditation Scheme/
The report shall not be reproduced wholly or in parts unless approval in writing has been given by CAST Laboratories Pte Ltd.