Post on 21-Jan-2019
Power over Ethernet (PoE)Campus Access Control Products
Passport 1000 P1
Copyright © 2009 - 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Available through Authorized Channel Partners only. Contact your local PERSONA or ASSA ABLOY Door Security Solutions sales consultant for details.
GreenSpec® L ISTEDwww.BuildingGreen.com
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
Table of ContentsOverview and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1P1 8200 Series Mortise Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2P1 10 Line Cylindrical Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3P1 80 Series Exit Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Exit Devices Retrofit Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Finishes, ET Trim and Handing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Standard and Coastal Levers, Rose and Thumbturn Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Studio Collection Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Ordering Gramercy Series Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9PoE Hinges and Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Application Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14Mechanical Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Cylinder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Shipping Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17UL Listed Hurricane-Resistant Certifications & Florida Building Codes . . . . . . . . . . . . . . . . . 18Architectural specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20
Passport 1000 P1 OnlinePoE (Power over Ethernet)Typical Application
Power over Ethernet (PoE) Campus Access Control ProductsPassport 1000 P1
www.sargentlock.com
MicroShield® Coating
• Revolutionary finish coating available on all SARGENT product lines, utilizes a silver-based antimicrobial compound from Agion Technologies
• As an integral part of the finish coating, MicroShield lasts for the life of the hardware
• MicroShield coating permanently suppresses the growth of bacteria, algae, fungus, mold and mildew. It is effective against a broad spectrum of bacteria.
• Non-toxic and completely safe. The Agion antimicrobial compound is EPA and NSF approved and FDA listed for use in medical and food preparation equipment.
• Applications: Anywhere there is need for a clean environment (hospitals, laboratories, schools, medical centers, daycare, food processing etc.)
MicroShield®
As part of their promise to provide innovative solutions to their customers, certain ASSA ABLOY Group brands offer the MicroShield® technology, a silver-based antimicrobial coating designed to inhibit the growth of bacteria.MicroShield® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
OverviewAn online ANSI/BHMA Grade 1 lock utilizing Power over Ethernet (PoE) technology, the Passport 1000 P1 provides a cost-effective, future-proof solution for campuses . Featuring HID® multiCLASS SE® technology, it provides simultaneous support for multiple credentials and offers an easy migration path to higher security credentials and mobile access . Recognized for its contribution to sustainable buildings, the P1 re-uses existing IEEE 802 .3af PoE infrastructure, streamlines the installation process, reduces costs and components, and minimizes power consumption .
About ASSA ABLOY’s Authorized Channel Partner and Certified Integrator ProgramsThe SARGENT Passport 1000 P1 is part of the expanding ASSA ABLOY family of innovative products combining our proven mechanical locking devices with leading-edge technologies to provide integrated electronic access control solutions . As such, these products require training and certification for resellers and integrators to ensure proper product selection, successful deployment and customer satisfaction .
To aid our customers in this area, ASSA ABLOY has created two programs that provide the necessary training to sell, order, install and service our technology products, including Aperio wireless, Integrated Wiegand, IP-enabled and self-configurable intelligent components:
• The Authorized Channel Partner (ACP) program is open to resellers, who sell ASSA ABLOY’s technology products to certified integrators and help with product selection based on the application.
• The Certified Integrator (CI) program provides hands-on training for security systems integrators and network administrators. Not only does this training familiarize certified integrator candidates on product features and applications, it also gives them valuable experience installing, commissioning, and troubleshooting the products in a real-world environment. This category extends to End Users that install and manage their own systems and third party lock installers as well.
For more information on the qualifications for becoming an ACP or CI, contact your local ASSA ABLOY Door Security Solutions sales consultant for details.
Passport 1000 P1 Features• Intelligent, integrated ANSI/BHMA Grade 1 lockset, available in
cylindrical lock, mortise lock, and exit device configurations, offers the highest degree of physical security available in access control locks
• Utilizes IEEE 802 .3af PoE-enabled network infrastructure for cost-effective installations and real-time communication
• Lock holds 2,400 users and 10,000 events locally• Available with key override
Access Credentials Magnetic Stripe:• Read speed: 4 to 40 in/s• Card track: Track 2• Card Coercivity: HiCo (4000 Oersted) or LoCo (300 Oersted)• Time resolution on card: 1 minute• Magnetic head lifetime: 300,000 operationsKeypad:• PIN code: 4-digits with card, or 6-digits PIN onlyCredential Reader:Features HID® multiCLASS SE® technology to support the following credentials:• High Frequency (13 .56 MHz) - HID iCLASS®
- HID iCLASS SE® (SIO-enabled) - HID iCLASS® Seos™ - HID MIFARE® SE - HID DESfire® EV1 SE - MIFARE Classic - DESfire EV1 - FeliCa - NFC-enabled mobile phones - Bluetooth Smart-enabled mobile phones• Low Frequency (125 kHz): - HID Prox®
Passport 1000 P1Overview and Features
www.sargentlock.com 1
Electrical Specifications• Power supplied through Ethernet• Class 2 Device defined by IEEE 802 .3af requiring 7 watts• Network Drop Cable (by others) Specifications: - Cat5e or higher - TIA/EIA-568-B - Plenum-rated (if required by local code) - 24AWG• Grounding - Device ground must be tied to building/electrical earth ground• FCC Part 15-compliant• Network Surface Mount Box: - Cat5e or higher (RJ45) - TIA/EIA-568-B
SoftwareCompatible with ASSA ABLOY’s PERSONA Campus™ software or with approved third party access control software .
PERSONA Campus SoftwarePERSONA Campus™ Software is an advanced and flexible lockingsystem that supports magstripe and contactless technology to provideseamless database integration and software interface with enterprise,transactional and housing systems . Campus™ software providescustomized access by user, by facility, or individual lock .
Electrical Specifications• Operating temperature: -13°F (-25°C) to 151°F (66°C)• Humidity: < 85% non-condensing• Storage temperature: -22°F (-30°C) to 176°F (80°C)
Sold through
To be installed by
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
Featuring EcoFlex™ technology, the Passport 1000 motorized 8200 Series Mortise Lock has a clean, crisp design and is available with the SARGENT Studio Collection, Coastal Series and traditional lever designs in a full array of finishes . The Passport 1000 P1 8200 mortise locks are available with or without deadbolt and with or without key override .
Passport 1000 P1 Mortise Lock Functions
Mechanical Features• Certified to ANSI/BHMA A156 .13 Series 1000 Grade 1• Motor driven mortise lock• 3/4" stainless steel, anti-friction reversible latch• For 1-3/4" (44mm) thick door standard . Consult factory for other
thicknesses
• 8200 Series Levers and Roses are shown on pages 6-8• Stainless steel non-handed deadlocking latch• Handed lockbody, easily field reversible without opening lock body• Lever trim through-bolted for increased security and durability• UL/ULC Listed for use on fire doors*• Hurricane-Resistant Certifications listed on page 16
If the lock needs to have: Then select:Technology Series Type Function
Magnetic Stripe onlyKey override and deadbolt P1 82 276Key override and no deadbolt P1 82 278Deadbolt and no key override P1 82 277No deadbolt and no key override P1 82 279Magnetic Stripe & KeypadKey override and deadbolt KP- P1 82 276Key override and no deadbolt KP- P1 82 278Deadbolt and no key override KP- P1 82 277No deadbolt and no key override KP- P1 82 279iCLASS, keypad, mag stripe, Prox, smart card (MIFARE, DESFIRE)
Series Type Function TechnologyKey override and deadbolt P1 82 276 IKMPS*Key override and no deadbolt P1 82 278 IKMPS*Deadbolt and no key override P1 82 277 IKMPS*No deadbolt and no key override P1 82 279 IKMPS*iCLASS, mag stripe, Prox, smart card (MIFARE, DESFIRE)Key override and deadbolt P1 82 276 IMPS*Key override and no deadbolt P1 82 278 IMPS*Deadbolt and no key override P1 82 277 IMPS*No deadbolt and no key override P1 82 278 IMPS*FeliCa, keypad, mag stripe, ProxKey override and deadbolt P1 82 276 CKMP*Key override and no deadbolt P1 82 278 CKMP*Deadbolt and no key override P1 82 277 CKMP*No deadbolt and no key override P1 82 278 CKMP*FeliCa, mag stripe, ProxKey override and deadbolt P1 82 276 CMP*Key override and no deadbolt P1 82 278 CMP*Deadbolt and no key override P1 82 277 CMP*No deadbolt and no key override P1 82 278 CMP*
Standard P1-Mortise feature:• Outside lever rigid except when in "passage"
mode or valid user code entered• Trim inside always retracts latch and/or deadbolt• Guardbolt deadlocks latch• Request-to-Exit: monitoring inside lever• Latchbolt Monitoring: monitors latchbolt position• Door Position Signaling: monitors door positionKey Override Function Features:• Key outside retracts latchbolt and retracts &
projects deadbolt• Key override with a #41 (1-1/8") Mortise Cylinder Deadbolt Function Features:• When deadbolt thrown, outside lever operable only
with predetermined code• Deadbolt Monitoring: monitors deadbolt position • 1" hardened stainless steel deadbolt
P1 Mortise Lock Functions
Passport 1000 P1P1 8200 Series Mortise Locks
www.sargentlock.com2
Options Technology Series Type Function Roses Levers Finish HandSelect from pages 13-15 Select from P1 Mortise Lock Function chart above Select rose, lever and finish from pages 6-8 RHR, LHR, RH or LH
Example: KP-P1-82276 LN MX 03 RH
Options Series Type Function Technology Roses Levers Finish HandSelect from pages 13-15 Select from P1 Mortise Lock Function chart above Select rose, lever and finish from pages 6-8 RHR, LHR, RH or LH
Example: P1-82276-IKMPS LN MX 26D RH
How to Order: Passport 1000 P1 Mortise Locks with Magnetic Stripe only or Magnetic Stripe and Keypad
How to Order: Passport 1000 P1 Mortise Locks with multiCLASS SE® Reader
* Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation . When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings .
* For Bluetooth Smart support, add "B" to the beginning of the technology code .
Escutcheons• Key button text is recessed to prevent wear• Zinc die cast• A multi-colored LED indicates valid/invalid entries• Outside Escutcheon Projection is 1-5/8" (41mm)• Inside Escutcheon Projection is 1-5/8" (41mm)
Inside Shown
13-1/2" (343mm)
3-3/4" (95mm)
Outside Shown
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
The PERSONA Passport 1000 P1 10 Line Cylindrical lock is available with a wide selection of lever designs and hardware finishes . Its unique design provides uniformity when used with other SARGENT locks at a facility .
P1-10G77 Entry Lock with CylinderAll P1 Cylindrical functions feature:• Outside lever rigid except when in "passage" mode or
valid user code entered• Lever inside always retracts latch• Guardbolt deadlocks latch• Request-to-Exit (REX) signaling standard• Door Position Switch (DPS, part #52-5373) supplied to
allow for full monitoring• 10 Line Levers are shown on page 6 and Roses are shown
on page 8Key Override Standard Features:• Key outside retracts latchbolt
P1 Cylindrical Lock Functions
Options Technology Series Type Function Roses Levers Finish HandSelect from pages 13-15 Select from P1 Cylindrical Lock Function chart above Select rose, lever and finish from pages 6 & 8 RHR, LHR, RH or LH
**28- KP-P1-10G77 L G 03 RH
Options Series Type Function Technology Roses Levers Finish HandSelect from pages 13-15 Select from P1 Cylindrical Lock Function chart above Select rose, lever and finish from pages 6 & 8 RHR, LHR, RH or LH
**28- P1-10G77-IKMPS L G 03 RH
How to Order: Passport 1000 P1 Cylindrical Locks with Magnetic Stripe only or Magnetic Stripe and Keypad
How to Order: Passport 1000 P1 Cylindrical Locks with multiCLASS SE® Reader
If the lock needs to have: Then select:Technology Series Type Function
Magnetic Stripe onlyKey override P1 10 G77Magnetic Stripe & KeypadKey override KP- P1 10 G77
Series Type Function TechnologyiCLASS, keypad, mag stripe, Prox, smart card (MIFARE, DESFIRE)Key override P1 10 G77 IKMPS*iCLASS, mag stripe, Prox, smart card (MIFARE, DESFIRE)Key override P1 10 G77 IMPS*FeliCa, keypad, mag stripe, ProxKey override P1 10 G77 CKMP*FeliCa, mag stripe, ProxKey override P1 10 G77 CMP*
Passport 1000 P1P1 10 Line Cylindrical Locks
www.sargentlock.com 3**28- option supplies a 4-7/8" strike, opposed to the 2-3/4" T strike supplied standard
Mechanical Features• Certified ANSI/BHMA A156 .2 Series 4000 - Grade 1• Motor driven cylindrical lock• Latch Stainless Steel, 1/2" (13mm) throw• 2-3/4" (70mm) backset standard; 3-3/4" and 5" backsets also available• For 1-3/4" (44mm) thick door standard . Consult factory for other thicknesses• Non-Handed lock body, levers may be handed (Specify RH, RHR, LH or LHR)• Heavy duty lever spring return• Adjustable through-bolt positions• Steel mounting studs• Not available with 10-UL-, 82-, 83- or 84- options• UL/ULC Listed for fire doors*• Hurricane-Resistant Certifications listed on page 16
52-5373 Door Position Switch (DPS)• SPST concealed switch (2 wire)• Metal Door adapter included• 3/8" Diameter for wood door• 3/4" Diameter for metal door
* Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation . When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings .
Escutcheons• Key button text is recessed to prevent wear• Zinc die cast• A multi-colored LED indicates valid/invalid entries• Outside Escutcheon Projection is 1-5/8" (41mm)• Inside Escutcheon Projection is 1-5/8" (41mm)
Inside3-3/4" (95mm)
14-1/4"(362mm)
Outside3-3/4" (95mm)
14-1/4"(362mm)
* For Bluetooth Smart support, add "B" to the beginning of the technology code .
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
www.sargentlock.com
P1 80 Series Exit DevicesPassport 1000 P1
The Passport 1000 P1 80 Series Exit Devices offers access control for campus environments, and particularly in areas where life safety is a primary concern, such as in stairwell areas or tenant-occupied facilities .
17-3/8"(441mm)
17"(431mm)
17-3/8"(441mm)
17"(431mm)
Mechanical Features• Certified ANSI/BHMA A156 .3 Grade 1• Latch 3/4" (19mm) throw (8800: stainless steel, 8900:
anti-friction brass)• Cylinder requirements: 8800 Series uses a #34 Rim Cylinder;
8900 Series uses a #46 Mortise Cylinder (1-3/4")• For 1-3/4" (44mm) door standard . Consult factory for other thicknesses• Available with Studio Collection, Coastal Series and all
standard levers• UL/ULC Listed for fire doors*• Hurricane-Resistant Certifications listed on page 16
4
Options Technology Series Type Function Rail Size ET Trim/ Lever Finish Hand Door Width
Select frompages 13-15
Select from P1 Exit Device Function chart above
E: 24 - 32"; F: 33 - 36"; J: 37 - 42"; G: 43 - 48"
ET followed by leverdesignation from pages 6-8
Select from page 6 RHR or LHR If supplied, rails will
be cut to size
Example: KP-P1-8878 F ETL 03 RHR 34"
Options Series Type Function Technology Rail Size ET Trim/ Lever Finish Hand Door Width
Select from pages 13-15
Select from P1 Exit Device Function chart above
E: 24 - 32"; F: 33 - 36"; J: 37 - 42"; G: 43 - 48"
ET followed by leverdesignation from pages 6-8
Select from page 6 RHR or LHR If supplied, rails will
be cut to size
Example: P1-8878-IKMPS F ETL 32D RHR 34"
How to Order: Passport 1000 P1 Exit Devices with Magnetic Stripe only or Magnetic Stripe and Keypad
How to Order: Passport 1000 P1 Exit Devices with multiCLASS SE® Reader
P1 Exit Device Functions
All P1 Exit Devices feature:• Lever outside rigid except when in passage mode or valid user
code entered• Always allows free egress• Request-to-Exit (REX): monitors rail position• Door Position Switch (DPS, part #52-5373) supplied; allow for
full monitoring (shown on page 3)
Mortise Lock Exit Rim ExitIf the lock needs to have: Technology Series Type & Function Technology Series Type & FunctionMagnetic Stripe only Key override P1 8977 P1 8877No key override P1 8978 P1 8878Magnetic Stripe & KeypadKey override KP- P1 8977 KP- P1 8877No Key override KP- P1 8978 KP- P1 8878
Series Type & Function Technology Series Type & Function TechnologyiCLASS, keypad, mag stripe, Prox, smart card (MIFARE, DESFIRE)Key override P1 8977 IKMPS* P1 8977 IKMPS*No Key override P1 8978 IKMPS* P1 8978 IKMPS*iCLASS, mag stripe, Prox, smart card (MIFARE, DESFIRE)Key override P1 8977 IMPS* P1 8977 IMPS*No Key override P1 8978 IMPS* P1 8978 IMPS*FeliCa, keypad, mag stripe, ProxKey override P1 8977 CKMP* P1 8977 CKMP*No Key override P1 8978 CKMP* P1 8978 CKMP*FeliCa, mag stripe, ProxKey override P1 8977 CMP* P1 8977 CMP*No Key override P1 8978 CMP* P1 8978 CMP*
* Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation . When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings .
Outside ET Lever Control • Cast escutcheon• Projection 13/16" (21mm)• Motor-driven trim
Escutcheons• Key button text is recessed to
prevent wear• Zinc die cast• A multi-colored LED indicates
valid/invalid entries
• Outside Escutcheon Projection
is 1-5/8" (41mm)• Inside Escutcheon Projection is
1-5/8" (41mm)
* For Bluetooth Smart support, add "B" to the beginning of the technology code .
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
5www.sargentlock.com
Exit Device Retrofit KitsPassport 1000 P1
Add the advanced access control capabilities of Passport 1000 to existing exit devices . Our retrofit kits make it easy to upgrade your campus security without the hassle and expense of replacing the entire exit device .
Retrofit Kits for Von Duprin® 98/99 Series Rim Exit Devices
Features:• Key override compatible with a variety of rim cylinders . Trim prepped for cylinder (not included) .• Available with all Passport 1000 P1 credential options• Provides complete coverage of door prep for Von Duprin 996 trim; call 800-810-WIRE
for information on door prep coverage for other trims• Available with Studio Collection, Coastal Series, and all standard levers• Available in the same finishes as Passport 1000 exit devices with ET trim (see page 6) • Mechanical trim available for double door applications . Refer to accessories page (page 12)
for ordering information .
Specifications:• Meets ANSI/BHMA Grade 1 requirements• UL/ULC Listed for fire doors*• Requires Von Duprin RX switch assembly #050251-00 (supplied by others)
* Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation . When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings .
If the retrofit kit needs to have: Then select:Technology Series Function Outside Trim
Magnetic Stripe only P1 231 EK1Magnetic Stripe & Keypad KP P1 231 EK1
Series Function Outside Trim Technology
iCLASS, keypad, mag stripe, Prox, smart card (MIFARE, DESFIRE)
P1 231 EK1 IKMPS*
iCLASS, mag stripe, Prox, smart card (MIFARE, DESFIRE)
P1 231 EK1 IMPS*
FeliCa, keypad, mag stripe, Prox P1 231 EK1 CKMP*FeliCa, mag stripe, Prox P1 231 EK1 CMP*
Passport 1000 P1
Technology Series Function Outside Trim Levers Finish Hand
Select from P1 Retrofit Kit Function chart above Select lever and finish from pages 6-8 RHR or LHR
KP-P1-231x EK1 G 26D LHR
How to Order: Passport 1000 P1 Exit Device Retrofit Kits with Magnetic Stripe only or Magnetic Stripe and Keypad
Series Function Technology Outside Trim Levers Finish Hand
Select from P1 Retrofit Kit Function chart above Select lever and finish from pages 6-8 RHR or LHR
P1-231 x IMPS x EK1 G 26D LHR
How to Order: Passport 1000 P1 Exit Device Retrofit Kits with multiCLASS SE® Reader
* For Bluetooth Smart support, add "B" to the beginning of the technology code .
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
6 www.sargentlock.com
Finishes, ET Trim and HandingPassport 1000 P1
The 700 Series ET and Lever Control is the external trim with all P1-80 Series exit devicesET Escutcheons and levers are plated brass Stainless steel levers are available
FinishesSARGENT offers many different finishes for P1 products. Please reference the chart below for finishes available.
Note: Exit devices are only available with ET Trim
Finishes ANSI MortiseLocks
CylindricalLocks
ExitDevices
03 Bright brass 605 X X X
04 Satin brass 606 X X X
09 Bright bronze 611 X X X
10 Satin bronze, clear powder 612 X X X
10B Oxidized satin bronze oil rubbed 613 X X X
10BE Dark oxidized satin bronze - equivalent X X X
10BL Oxidized satin bronze, clear power coat – X X X
14‡ Bright nickel, clear coated 618 X X X
15‡ Satin nickel, clear coated 619 X X X
20D Dark statuary bronze, clear powder coat – X X X
26‡ Bright chrome 625 X X X
26D‡ Satin chrome 626 X X X
32 Bright stainless steel 629 X – X
32D Satin stainless steel 630 X – X
ET Lever Trim for Exit Devices
13/16" (21mm)1-13/16" (46mm)
8-1/16" (205mm)
3-9/16" MAX (90mm)
Handing
Left Hand Door
LH
Outside
Right Hand Door
RH
Outside
Right Hand Reverse Door
Outside
RHR
Left Hand Reverse Door
LHR
Outside
‡ Exit Devices ordered in 32 or 32D will have the ET trims supplied in 26 or 26D; for nickel finished ET trims, specify 14 or 15 finish and the exit will be supplied in 32 or 32D accordingly
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
7www.sargentlock.com
Standard and Coastal Series Levers,Rose and Thumbturn DesignsPassport 1000 P1
Passport 1000 P1 products are available with the following identified lever designs to provide uniformity throughout a facility. Lever projection from door surface varies with lock type. P1 mortise locks and cylindrical locks are specified by rose design followed by the lever designation (e.g., LNMX). P1 Exit devices are specified by the ET designation followed by the lever designation (e.g., ETMX).
The thumbturn backplate will match the rose design chosen. The turn desgination must be specified as an option before the lock order string. *The standard thumbturn will be supplied if T1, T2 or T3 are not listed. See page 8 in the 8200 mortise lock catalog for more information.
Note: P1-8200 mortise locks with standard levers are available with LN and O roses only (not available with CO, CR, TO & TR roses)
Note: P1-8200 mortise locks with Coastal Series levers are available with CR & TR roses (Not available with LN, O, CO & TO roses)
Roses Design Diameter MortiseLocks
CylindricalLocks
LN 2" X
CR 2-3/16" X
TR 2-3/16" X
O 2-3/4" X
E2 2-11/16" X
Roses Design Diameter MortiseLocks
CylindricalLocks
E3 2-1/16" X
CO 2-3/4" X
TO 2-3/4" X
L 3-1/2" X
G 3-1/2" X
Levers
Roses
Thumbturns
T1 Turn T2 Turn T3 Turn Standard Turn*
1-1/2"38mm
1-1/2" dia.38mm
1-1/2" dia.38mm
1-1/2" dia.38mm
Standard Levers
Lever Design Handed MortiseLocks
CylindricalLocks
ExitDevices
A Yes X X
B
– X X X
E
– X X
F
– X X
J
– X X X
L
– X X X
P – X X X
W
– X X
Coastal Levers
Lever Design Handed MortiseLocks
CylindricalLocks
ExitDevices
C
– X X
G
Yes X X
R
– X X
S
Yes X X
Y
Yes X X X
8 www.sargentlock.com
Passport 1000 P1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
Studio Collection Levers
* Lever returns within 1/2" (13mm) of door face** Gramercy levers are customized. Refer to page 9 for ordering information.***Contact factory for current lead times
Studio Collection Levers are available with the 8200 Series Mortise Locks. With Exit Device, the Studio Collection is available with the ET trim creating uniformity throughout a facility.
Notting Hill Series
Lever Design Handed MortiseLocks
ExitDevices
MA*** Yes X X
MQ Yes X X
MT Yes X X
MM Yes X X
MR*** Yes X X
MY* Yes X X
Centro Levers
MC*** – X X
MD
– X X
MJ
– X X
MP
– X X
ND* – X X
NJ* – X X
Aventura Series
Lever Design Handed MortiseLocks
ExitDevices
MB
– X X
ME
– X X
MF
– X X
NF*
– X X
MG
– X X
MI
– X X
NI* – X X
MW*
– X X
Gramercy Levers**
RCM
– X X
RAL
– X X
REM
– X X
RAM
– X X
RAS – X X
RAW – X X
RAG – X X
RGM – X X
Rialto Series
MO Yes X X
MZ* Yes X X
Odeon Series
MN Yes X X
MH Yes X X
MK Yes X X
MS Yes X X
MU Yes X X
MV Yes X X
NS* Yes X X
NU* Yes X X
MX* Yes X X
9www.sargentlock.com
Passport 1000 P1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
Ordering Gramercy Series Levers
Options Series/ Type Function Technology Rose Lever Finish Hand
select frompages 13-15 P1-82 select from
page 2select from
page 2select from
belowLeather insert Bright stainless steel with brown leather RHR, RH,
LHR, or LH
10- P1-82 276 IMPS LN RAL 29BN RH
How to Order: P1- Mortise Lock with Gramercy Levers
Options Function Series Type Function Rail Size Trim Lever Finish Inside Finish
Door Width
select from pages 13-15
Select from 80 Series Exit Device Function chart from page 4
E, F,J or G
ET Series
Leather insert Bright stainless steel with brown leather
selectfrom
page 6
10- 77 P1- 88 IKMPS F ET RAL 29BN 32D 36"
How to Order: P1- Exit Device x Gramercy Levers
Gramercy Series Levers
REM, RGM RCM RAG, RAL, RAM, RAS, RAW
To order Gramercy Series levers with SARGENT products, see the examples below. When specifying finish, use the last two digits of the BHMA standard finish code, i.e. use “29” for polished stainless, BHMA finish 629.
Lever Designation Lever Description Available Finishes (AS ORDERED)
RAG Grooved Insert 2929 or 3030
RAL Leather Insert 29BK, 29BN or 30BK, 30BN
RAM Metallic Insert 2930** only
RAS Santoprene Insert 29BK or 30BK
RAW Wood Insert 29BH or 30BH
RCM Raised Band 2929, 3030 or 2930**
REM Plain 2929 or 3030
RGM Two Grooves 2929 or 3030
BHMA Finish SARGENT Finish Gramercy Code* Description
630 32D 30 Satin Stainless Steel
629 32 29 Bright Stainless Steel
N/A N/A BH Birch (wood insert)
N/A N/A BK Black (Santoprene™ or leather insert)
N/A N/A BN Brown (leather insert)
**Two-tone finish - grip of lever is 32D, balance of lever is 32. Rose/escutcheon and lock finish will be 32.
*Code used to specify Gramercy Series finishes only. Use available finishes list to specify desired finish when ordering.
Gramercy Finish Codes
Gramercy Lever Descriptions & Available Finishes
10 www.sargentlock.com
Overview, Features and Electrical SpecificationsPassport 1000 P1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
PoE Hinges*
Description
4 ½" x 4 ½" TA2714 26D PoE (Standard Weight 5 knuckle)
4 ½" x 4 ½" T4A3786 26D PoE (Heavy Weight 5 knuckle)
PoE Door Harnesses
PoE Frame Harness
*See the McKINNEY catalog for additional finishes and hinge types
Door Width Cable Length Harness Description
28" to 31" 36" PoE-C300P
32" to 36" 42" PoE-C306P
37" to 42" 48" PoE-C400P
43" to 48" 54" PoE-C406P
All are Cat5e, 26 AWG, Shielded, Stranded, 100 Ohm
Cable Length Harness Description
180" PoE-C1500P
Cat5e, 24 AWG, Shielded, Stranded, 100 Ohm
The following are required system components ordered through McKINNEY. Please note that one hinge, one door harness assembly and one frame harness assembly are required for each PoE opening.
The PoE door & frame harnesses can accommodate a variety of new (with raceway) and retrofit applications.
The door harness connectors are small enough to run through a 3/8" minimum stile-to-stile door raceway.
Patent Pending
3⁄32"(2mm)Thick
4-7⁄
8"(1
24m
m)
2-3⁄
4"(7
0mm
)
1-1/4"(32mm) Lip Length
4-1/8"(104.7mm)
11/16"(17mm)
1-1⁄4"(32mm)
2-3⁄
4"(7
0mm
)
1-1⁄
2"(3
8mm
)
1-1⁄8"(29mm)
1⁄16"(2mm)
3/8" (10mm) start of radius
5/16" (8mm) radius
4-7⁄
8"(1
24m
m)
3-3⁄
8"(8
5mm
)
1-1⁄4"(32mm)
1-1⁄4"(32mm)
1⁄16"(2mm)
3/8" (10mm) start of radius
5/16" (8mm) radius
P1 8900 Series Mortise Lock Exit DeviceStandard Strike (C908)• Curved lip ANSI A-115 .1• Black nylon coated
P1 8800 Series Rim Exit Device
P1 8200 Mortise LockStandard Strike
• Curved lip strike
• Hardware finished to match lock
P1 10 Line Cylindrical LockStandard Strike
• Hardware finished to match lock
P1 10 Line Cylindrical LockOptional Strike (28- option)
• 4-7/8" Curved Lip Strike
• Hardware finished to match lock
3/4" (19mm)
3-11/16"(94mm)
1-5/32"(29mm)
1/4" (6mm)
1-1/4" (32mm)
3-3/8" (86mm)
4-7/8" (124mm)
1-1/4" (32mm) 3/32"
(2mm)
Standard Strike (649)• Supplied standard for panic
& fire rated openings• Surface applied• Black nylon coated
11www.sargentlock.com
Overview, Features and Electrical SpecificationsPassport 1000 P1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
Device ground must be connected to building/electrical earth ground
Passport 1000 P1 PoE Lock
12 www.sargentlock.com
Overview, Features and Electrical SpecificationsPassport 1000 P1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
52-5373 Door Position Switch (DPS)• SPST concealed switch (2 wire)• Metal Door adapter included• 3/8" Diameter for wood door• 3/4" Diameter for metal door• Supplied with P1 Exit Devices and Bored Locks
52-0782
For use with Passport
Escutcheon
Weatherseal Gasketing
52-0263
For use with ET Trim
97-0773
For use with EK1 Exit Trim
• Provides sealing between outside escutcheon and door for exterior applications
• Gasketing (included) recommended for non-fire rated exterior applications
DHTAPower over Ethernet (PoE) Cable and Data Hinge Test Adapter
Developed for troubleshooting SARGENT Passport 1000 P1 and Profile Series v .S1 locks, the ASSA ABLOY PoE cable and data hinge test adapterverifies your PoE installation in the field . Sold as a kit containing two test adapters, it allows you to verify proper wiring from the door frame to the PoE data hinge and lock, or test the frame, hinge or door cables independently .This test tool helps answer the question “Is the problem in the lock or in the wiring to the lock?” and will save you troubleshooting time .The DHTA works in conjunction with the following products or their equivalent, provided by others:• BK Precision model 231A• FLUKE DTX 1800 CableAnalyzer™
• Two (2) Category 5e patch cables, each (10) feet in length
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
www.sargentlock.com
Replacement PartsPassport 1000 P1
13
Description Order String
EK1 exit device retrofit kit exit trim replacement (electrical)* 777-5 x EK1 x Lever x Finish x Hand
EK1 exit device retrofit kit exit trim replacement (mechanical)* 706-5 x EK1 x Lever x Finish x Hand
Replacement Parts/Accessories for Retrofit Exit Trim
* Trim is prepped for cylinder (not included) .
ElectronicsPart No . Description52-3583-[finish] Outside escutcheon assemby, mag stripe52-3582-[finish] Outside escutcheon assemby, mag stripe and keypad52-4759-[finish] Outside escutcheon assemby, iCLASS, keypad, mag stripe, Prox, smart card (MIFARE, DESFIRE)
52-4894-[finish] Outside escutcheon assemby, iCLASS, keypad, mag stripe, Prox, smart card (MIFARE, DESFIRE), Bluetooth Smart-enabled mobile phones
52-4777-[finish] Outside escutcheon assemby, iCLASS, mag stripe, Prox, smart card (MIFARE, DESFIRE)
52-4895-[finish] Outside escutcheon assemby, iCLASS, mag stripe, Prox, smart card (MIFARE, DESFIRE), Bluetooth Smart-enabled mobile phones
52-4787-[finish] Outside escutcheon assemby, FeliCa, keypad, mag stripe, Prox52-4896-[finish] Outside escutcheon assemby, FeliCa, keypad, mag stripe, Prox, Bluetooth Smart-enabled mobile phones52-4788-[finish] Outside escutcheon assemby, FeliCa, mag stripe, Prox52-4897-[finish] Outside escutcheon assemby, FeliCa, mag stripe, Prox, Bluetooth Smart-enabled mobile phones52-4795 PoE controller assembly52-4779 Mounting plate assembly52-4776-[finish] Inside escutcheon assembly with privacy button
Passport 1000 P1 Mortise Lock Replacement PartsP1-82276-26D Lockbody with deadbolt and cylinderP1-82277-26D Lockbody with deadbolt, without cylinderP1-82278-26D Lockbody without deadbolt, with cylinderP1-82279-26D Lockbody without deadbolt, without cylinder
Passport 1000 P1 Cylindrical Lock Replacement PartsPart No . Description52-5373 Door position switch kit10-3407 Lockbody - standard cylinder10-3412 Lockbody - LFIC10-3417 Lockbody - SFIC
Passport 1000 P1 PoE Rim Exit Device Replacement PartsPart No . Description52-5373 Door position switch kit97-3562-[finish] Exit trim (ET) with cylinder97-3563-[finish] Exit trim (ET) without cylinder52-3891 Motor assembly
Passport 1000 P1 PoE Mortise Exit Device Replacement PartsPart No . Description52-5373 Door position switch kit97-3558-[finish] Exit trim (ET) with cylinder97-3559-[finish] Exit trim (ET) without cylinder52-3891 Motor assembly
Sold through
14 www.sargentlock.com
Passport 1000 P1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Mechanical Options
To order options listed below, list the alpha or numerical code before the product model number
Mechanical Options:
Add Strength 3- Stainless steel hubs for institutional specifications (mortise locks only)
Fire Rated 12- UL Fire Label Exit hardware (exit devices only, not available with 16- & HK-)
Cylinder Dogging16- Cylinder lockdown (non-fire rated exit devices only)
LD- Less hex key dogging (non-fire rated exit devices only)
Less Touch Pad 19- Pushbar without Lexan touchpad (exit devices only)
10 Line Backsets23- 3-3/4" Backset x 2-1/4" x 1-1/8" Front (10 Line only)
25- 5" Backset x 2-1/4" x 1-1/8" Front (10 Line only)
Strike Options
23- 4-7/8" (124mm) ANSI flat lip strike (8900 mortise lock exit device & mortise locks only)
28- 4-7/8" Strike #808. Lip length 1-1/4" (10 Line only)
OBS- Open Back Strike (for 82278 & 82279 only)
WBS- Wrought Box Strike (Not available for 80 series)
Security Fasteners36- Six lobe security head screws
37- Spanner head screws
3/4" Latch Throw 41- 3/4" (19mm) throw latch x 2-3/4" (70mm) backset (10 Line only)
Flush End cap 43- Flush End Cap (exit devices only)
Tactile Warning Options
75- Tactile Warning - Milled Inside Lever (Not available with Exit Devices, Studio & Coastal Levers and the A Lever)
76- Tactile Warning - Milled Outside Lever (Not available with Studio & Coastal Levers and the A Lever)
77- Tactile Warning - Milled Inside & Outside Lever (Not available with Exit Devices, Studio & Coastal Levers and the A Lever)
85- Tactile Warning - Abrasive Coating on Inside Lever (or Push Rail for Exits)
86- Tactile Warning - Abrasive Coating on Outside Lever
87- Tactile Warning - Abrasive Coating on Outside Lever & Inside Lever (or Push Rail for Exits)
Finish ProtectionCPC- Clear Powder Coat (Available for 26, 26D, 32 & 32D Finishes)
SG- MicroShield® antimicrobial clear powder coat
SARGuide PL- SARGuide™ PL – Photoluminescent Coated Push Rail – (Touchpad eliminated) (Not available 75-, 77 & TL-)
Hurricane-Resistant exit devices
HC- Hurricane Code (rim exit devices only, see page 16 for details)
WS- Windstorm Rated (rim & mortise lock exit devices only, see page 16 for details)
Thumbturns T1- Decorative thumburn; backplate matches rose design chosen
T2- Decorative square thumburn; backplate matches rose design chosen
T3- Decorative cylinder thumburn; backplate matches rose design chosen
Sold through
Cylinder OptionsPassport 1000 P1
15www.sargentlock.com
Passport 1000 P1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Note: More Cylinder Options on the following page
Cylinder Options:
Degree Key System
DG1- SARGENT Degree Key System Level 1
DG1-21- Degree Level 1 Construction Master Keying
DG1-60- Degree Level 1 Removable Disposable Construction Core (not available with cylindrical locks)
DG1-63- Degree Level 1 Removable Core (not available with cylindrical locks)
DG1-64- Degree Level 1 Removable Construction Keyed LFIC (not available with cylindrical locks)
DG1-65- Degree Level 1 Unassembled/Uncombined Core
DG1-78- Degree Level 1 Exposed Plug (not available with cylindrical locks or exit devices)
DG2- SARGENT Degree Key System Level 2
DG2-21- Degree Level 2 Construction Master Keying
DG2-60- Degree Level 2 Removable Disposable Construction Core (not available with cylindrical locks)
DG2-63- Degree Level 2 Removable Core (not available with cylindrical locks)
DG2-64- Degree Level 2 Removable Construction Keyed LFIC (not available with cylindrical locks)
DG2-65- Degree Level 2 Unassembled/Uncombined Core
DG2-78- Degree Level 2 Exposed Plug (not available with cylindrical locks or exit devices)
DG3- SARGENT Degree Key System Level 3
DG3-21- Degree Level 3 Construction Master Keying
DG3-60- Degree Level 3 Removable Disposable Construction Core (not available with cylindrical locks)
DG3-63- Degree Level 3 Removable Core (not available with cylindrical locks)
DG3-64- Degree Level 3 Removable Construction Keyed LFIC (not available with cylindrical locks)
DG3-78- Degree Level 3 Exposed Plug (not available with cylindrical locks or exit devices)
Signature Key System
10- SARGENT Signature Key System (Not Available with other Key Systems)
10-21- SARGENT Signature Construction Key System (Lost Ball)
10UL- SARGENT Signature UL437 Key System (Not Available with other Key Systems)
Signature Large Format Interchangeable Core
10-63- SARGENT Signature Large Format Interchangeable Core (Removable Core) Cylinder
XC- Key System11- XC Key System (not available with 10-, 10UL-, 22-)
11-21- XC- Construction Key System (Lost Ball)
XC- Large Format Interchangeable Core
11-60- Hardware to accept XC- Permanent LFIC (Removable Core), Disposable plastic Core- provided
11-63- Hardware provided with XC- LFIC (Removable Core) Cylinder - (Includes masterkeying, grand masterkeying)
11-64- Hardware provided with Keyed construction core to accept XC- LFIC (Removable) Permanent Core (ordered separately)
XC- Interchangeable Cores
11-70-7P- Hardware to accept XC- SFIC ( 7-Pin) XC- Permanent Cores, plastic disposable core provided (10 Line J lever not available)
11-72-7P- Hardware to accept XC- SFIC (7-Pin Keyed Construction Core provided) cylinder Permanent core ordered separately (10 Line J lever not available)
11-73-7P- Hardware supplied with XC- Small Format 7-Pin interchangeable core (Includes masterkeying, grand masterkeying) (10 Line J lever not available)
11-65-73-7P- Hardware provided to accept XC- Uncombinated 7-Pin SFIC (Permanent) Core (10 Line J lever not available)
To order options listed below, list the alpha or numerical code before the product model number
Sold through
Cylinder Options &Shipping InformationPassport 1000 P1
16 www.sargentlock.com
Passport 1000 P1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Cylinder Options:
ConstructionKey Systems
21- SARGENT Lost Ball Construction Keying for Conventional, XC and Signature Series (N/A with 63- or 73-)
22- SARGENT Construction Split Key System for Conventional Cylinders (Existing Systems Only) (N/A with 10-, 11-, 63- or 73-)
Old StyleRemovable Core
51- Removable Core Cylinder (Old Style) provided (Existing Systems Only)
52- Removable Construction Core (Old Style) Permanent Core ordered separately (Existing Systems Only)
Large Format InterchangeableCore
60- Hardware to accept SARGENT Permanent LFIC (Removable Core), Disposable Plastic Core provided(Permanent Cores ordered separately)
63- Hardware provided with LFIC (Removable Core) Cylinder - (Includes masterkeying, grand masterkeying)
64- Hardware provided with Keyed construction core to accept LFIC (Removable) Permanent Core (ordered separately)
Interchangeable Cores
70- Hardware to accept 6 or 7-Pin SFIC Permanent Cores, Plastic Disposable Core provided (10 Line J lever not available)
72- Hardware to accept 6 or 7-Pin SFIC (Keyed Construction Core provided) Cylinder (10 Line J lever not available)(Permanent Core ordered separately)
73- Hardware supplied with 6 pin SFIC (Includes masterkeying, grand masterkeying) (10 Line J lever not available)
65-73- Hardware provided to accept Uncombinated 6-Pin SFIC (Permanent) Core (10 Line J lever not available)
65-73-7P- Hardware provided to accept Uncombinated 7-Pin SFIC (Permanent) Core (10 Line J lever not available)
73-7P- Hardware supplied with Small Format 7-Pin Interchangeable Core (Includes masterkeying, grand masterkeying)(10 Line J lever not available)
Keso &Keso F1
81- Hardware provided with housings to accept Keso (83) & Keso F1 (F1-83-) removable cores (Not available with 10 Line) (Permanent Cores ordered separately)
82- Hardware provided with SARGENT Keso Security Cylinder
F1-82- Hardware provided with SARGENT Keso F1 Security Cylinder (Patented)
83- Hardware supplied with SARGENT Keso Security Removable Core cylinder (Not available with 10 Line)
F1-83- Hardware supplied with SARGENT Keso F1 Security Removable Core cylinder (Not available with 10 Line) (Patented)
84- Hardware provided with SARGENT Keso Construction Cores (Not available with 10 Line)(Permanent Cores ordered separately)
Bump Resistant BR- Bump Resistant Cylinder (Available with Conventional & Conventional XC Cylinders Only)
Less Cylinder LC- Hardware supplied less cylinder
Accept Schlage Cylinders
30- Lever to accept Schlage Cylinder-Cylinder is not provided (10 Line only)
SF- L Lever to accept Medeco KeyMark Large Format Interchangeable and Schlage Full Size Interchangeable Core (10 Line only)
Schlage KeywaysSC- Schlage C keyway cylinder, 0 bitted (Not available with 8900 Series exit devices)
SE- Schlage E keyway cylinder, 0 bitted (Not available with 8900 Series exit devices)
To order options listed below, list the alpha or numerical code before the product model number
Note: For V-10 Cylinders and information, contact ASSA, Inc. @ 800-235-7482
Hardware Shipping Weight Pc. Count/Carton
P1-82276 x lever trim (with cylinder & DB) 11.7 lbs (5.3 kg) 1/carton
P1-82278 x lever trim (with cylinder) 11.2 lbs (5.1 kg) 1/carton
P1-82277 x lever trim (w/o cylinder & w/ DB) 11.2 lbs (5.1 kg) 1/carton
P1-82279 x lever trim (w/o cylinder & DB) 10.7 lbs (4.9 kg) 1/carton
P1-10G77 with lever 10.1 lbs (4.6 kg) 1/carton
P1-8977 with ET 23.0 lbs (10.4 kg) 1/carton
P1-8877 with ET 21.0 lbs (9.5 kg) 1/carton
Sold through
UL Listed Hurricane-Resistant Certifications& Florida Building CodesPassport 1000 P1
17www.sargentlock.com
Passport 1000 P1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Passport WS-8900 mortise lock exit devices are UL Certified and Listed on the Florida Building Code Website for Hurricane-Resistant hardware:
• Passport WS8900 available for Single Hollow Metals Doors applications for 1-3/4" Thick door, 3'0" x 7’0" Max. Door with 6" Min Stile
• UL Listed per ANSI/SDI-BHMA A250.13• ANSI/ASTM E330-2002• ANSI/ASTM E1886-2005• ASTM E1996-2009
SARGENT Manufacturing offers a wide variety of products that meet building codes requiring hurricane-resistant certification. SARGENT products are independently tested to meet the requirements of the building codes as specified by the Florida Building Code, Miami Dade Code Requirements and in the International Building Code. Listed below are certifications and the test standards met by these products.
Passport 10 Line cylindrical locks are UL Certified and Listed on the Florida Building Code Website for Hurricane-Resistant hardware:
• UL Listed per ANSI/SDI-BHMA A250.13• ANSI/ASTM E330-2002• ANSI/ASTM E1886-2005• ASTM E1996-2009• Testing Application Standard (TAS) 201*• Testing Application Standard (TAS) 202*
• Testing Application Standard (TAS) 203* * published in the Florida Building Code for use in the High Velocity
Hurricane Zone (HVHZ)• UL Certification Directory ZHEM.R21744 Latching Hardware• UL Certification Directory ZHLL.R21744 Windstorm-rated Assemblies• Listed on Florida Building Code Website for Hurricane-resistance: FL6728-R1• Listed on Florida Building Code Website for Hurricane-resistance: FL4351-R1
Passport 8200 Series mortise locks are UL Certified and Listed on the Florida Building Code Website for Hurricane-Resistant hardware:
• UL Listed per ANSI/SDI-BHMA A250.13• ANSI/ASTM E330-2002• ANSI/ASTM E1886-2005• ASTM E1996-2009• Testing Application Standard (TAS) 201*• Testing Application Standard (TAS) 202*
• Testing Application Standard (TAS) 203* * published in the Florida Building Code for use in the High Velocity
Hurricane Zone (HVHZ)• UL Certification Directory ZHEM.R21744 Latching Hardware• UL Certification Directory ZHLL.R21744 Windstorm-rated Assemblies• Listed on Florida Building Code Website for Hurricane-resistance: FL6728-R1• Listed on Florida Building Code Website for Hurricane-resistance: FL4351-R1
Passport HC-8800 rim exit devices are UL Certified and Listed on the Florida Building Code Website for Hurricane-Resistant hardware:
• Passport HC8800 for single and double door applications; 8-0 max opening
• UL Listed per ANSI/SDI-BHMA A250.13• ANSI/ASTM E330-2002• ANSI/ASTM E1886-2005• Testing Application Standard (TAS) 201*• Testing Application Standard (TAS) 202*
• Testing Application Standard (TAS) 203* * published in the Florida Building Code for use in the High Velocity
Hurricane Zone (HVHZ) * published in the "Florida Building Code"• UL Certification Directory ZHEM.R21744 Latching Hardware• UL Certification Directory ZHLL.R21744 Windstorm-rated Assemblies• Listed on Florida Building Code Website for Hurricane-resistance: FL2998-R2
Passport WS-8800 rim exit devices are UL Certified and Listed on the Florida Building Code Website for Hurricane-Resistant hardware:
• Passport WS8800 for Single Hollow Metal 1-3/4" Thick Doors applications, 3’0" x 7’0" Max. Door with 6" Min Stile
• UL Listed per ANSI/SDI-BHMA A250.13• ANSI/ASTM E330-2002• ANSI/ASTM E1886-2005• ASTM E1996-2009 • Testing Application Standard (TAS) 201*
• Testing Application Standard (TAS) 202*• Testing Application Standard (TAS) 203* * published in the Florida Building Code for use in the High Velocity
Hurricane Zone (HVHZ)• UL Certification Directory ZHEM.R21744 Latching Hardware• Listed on Florida Building Code Website for Hurricane-resistance: FL4351-R1
• Testing Application Standard (TAS) 201*• Testing Application Standard (TAS) 202*• Testing Application Standard (TAS) 203* * published in the Florida Building Code for use in the High Velocity
Hurricane Zone (HVHZ)• UL Certification Directory ZHEM.R21744 Latching Hardware• Listed on Florida Building Code Website for Hurricane-resistance: FL4351-R1
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
Architectural SpecificationsPassport 1000 P1
Intelligent Power-over-Ethernet (PoE) Access Control Mortise LocksA . Power-over-Ethernet (PoE) Access Control
Mortise Locks to be 8200 Series as manufactured by SARGENT Manufacturing of New Haven, CT .
B . BHMA certified extra heavy duty, lever type mortise lock conforming to ANSI 156 .13 Series 1000, Grade 1 standard and ANSI A117 .1 accessibility guidelines . Electronic motorized locking control of lever handle trim (solenoids not acceptable) with 3/4" anti-friction deadlocking latch and 1" case-hardened steel deadbolt . UL listed and labeled for up to 3 hour fire rated openings .1 . Backset: 2-3/4 inches
C . Power-over-Ethernet intelligent access control locking devices interface using standard IEEE 802 .3af Ethernet for data and power communication directly from
the locking unit back to a host server over an existing or newly installed TCP/IP network facilitating centralized control via a Software Development Kit (SDK) to an online electronic access control system without the need for additional interfaces or components (excluding PoE Endspan and Midspan devices) .1 . Provide access control products with
non-volatile memory .D . Fully-encrypted AES-128 (IEEE 802 .3af)
communication between IP Enabled lock and electronic access control system platform via SDK . Programmable time zone periods, blocked holidays, automatic unlock with or without first entry, minimum of 2,400 user codes and the ability to audit the last 10,000 transactions (event type, date, time, user ID and name) . Distributed intelligence allows stand alone functional operation of lock in absence of network communication or
slowdown allowing for system operational redundancy .
E . Integrated reader supports High Coercivity (HiCo) magnetic swipe credentials, HID® 125 kHz proximity credentials or ISO 14443 A/B and ISO 15693 13 .56 MHz contactless credentials: HID® iCLASS / iCLASS SE (full authentication, all formats), MIFARE Classic and DESFire EV1 (full authentication, all formats); NFC (Near Field Communications) and HID® SIO-Enabled™ .1 . Valid/ Invalid credential presentation
viewable by means of LED indicators on outside escutcheon .
2 . Dual factor keypad authentication function optional .
F . Environmental Conditions: Conformally coated weather resistant electronic controller shall meet the following minimum requirements:
2.1 Passport 1000 P1 8200 Series Mortise Locksets
1.1 Passport-over-Ethernet (PoE) Access Control Cylindrical Locks
Intelligent Power-over-Ethernet (PoE) Access Control Cylindrical LocksA . Power-over-Ethernet (PoE) Access Control
Cylindrical Locks to be 10-Line Series as manufactured by SARGENT Manufacturing of New Haven, CT .
B . BHMA certified extra heavy duty, lever type cylindrical lock conforming to ANSI 156 .2 Series 4000, Grade 1 standard and ANSI A117 .1 accessibility guidelines . Motorized locking control of lever handle trim (solenoids not acceptable) with ½” anti-friction deadlocking latch, UL listed and labeled for up to 3 hour fire rated openings .1 . Backset: 2-3/4 inches
C . Power-over-Ethernet intelligent access control locking devices interface using standard IEEE 802 .3af Ethernet for data and power communication directly from the locking unit back to a host server over an existing or newly installed TCP/IP network facilitating centralized control via a Software Development Kit (SDK) to an online electronic access control system without the need for additional interfaces or components (excluding PoE Endspan and Midspan devices) .1 . Provide access control products with
non-volatile memory .D . Fully-encrypted AES-128 (IEEE 802 .3af)
communication between IP Enabled lock and electronic access control system platform via SDK . Programmable time zone periods, blocked holidays, automatic unlock with or without first entry, minimum of 2,400 user codes and the ability to audit the last 10,000 transactions (event type, date, time, user ID and name) . Distributed intelligence allows stand alone functional operation of lock in absence of network communication or
slowdown allowing for system operational redundancy .
E . Integrated reader supports High Coercivity (HiCo) magnetic swipe credentials, HID® 125 kHz proximity credentials or ISO 14443 A/B and ISO 15693 13 .56 MHz contactless credentials: HID® iCLASS / iCLASS SE (full authentication, all formats), MIFARE Classic and DESFire EV1 (full authentication, all formats); NFC (Near Field Communications) and HID® SIO-Enabled™ .1 . Valid/ Invalid credential presentation
viewable by means of LED indicators on outside escutcheon .
2 . Dual factor keypad authentication function optional .
F . Environmental Conditions: Conformally coated weather resistant electronic controller shall meet the following minimum requirements:1 . Operating temperature: -13°F (-25°C) to
151°F (66°C)2 . Operating humidity: < 85%
non-condensing3 . Weatherized design suitable to withstand
harsh environments with a certified rating of IP55
G . Configuration: Programming of time zone periods, blocked holidays, automatic unlock with or without first entry, and listing 10,000 event transaction history consisting of event type, date, time, user ID and name is required .1 . Provide network and lock configuration
CD tool kit for initial lock set-up and programming via USB connection .
H . Monitoring: Software accessible monitoring (via SDK) of inside lever handle (Request-to-Exit), door position switch (DPS) integral
to the lock (door open/closed status), forced door, unknown card, door held open, battery and tamper .1 . Standard privacy function initiated
from push button on inside escutcheon and cancelled upon activation of valid Request-To-Exit (REX) or user defined credentials .a . Activation of privacy function is
indicated by LED notification on inside escutcheon .
b . Redundant actuation of privacy button does not deactivate privacy mode .
I . Emergency override access capability by mechanical key cylinder retraction of lock latch bolt without electronic activation necessary .
J . Inside lever retracts latch bolt .K . Power source: PoE Class 2; Max 7 W .
1 . PoE endspan/midspan, electrical hard wiring, grounding, connections, mounting boxes, and structured cabling framework are required for complete system functionality (by others) .
2 . Network cabling (by others) requirements: Meet or exceed ANSI/TIA/EIA-568-C; CAT5e or higher as set forth by AHJ .
3 . Bonding and grounding requirements: Meet or exceed TIA-607-B to ensure proper operation; connect locking device ground cable to building electrical earth ground .
4 . Network surface mount box: Meet or exceed ANSI/TIA/EIA-568-B; CAT5e or higher (RJ-45) .
L . Cylinders: Reference 2 .04 Keying for keying requirements
www.sargentlock.com18
9069
3:G
4/1
4/15
Co
pyrig
ht ©
200
9-20
15, S
arge
nt M
anuf
actu
ring
Com
pany
, an
ASSA
ABL
OY
Gro
up c
ompa
ny. A
ll rig
hts r
eser
ved.
Repr
oduc
tion
in w
hole
or i
n pa
rt w
ithou
t the
exp
ress
writ
ten
perm
issi
on o
f Sar
gent
Man
ufac
turin
g Co
mpa
ny is
pro
hibi
ted.
Sold through
Passport 1000 P1Architectural Specifications
19www.sargentlock.com
3.1 Passport P1 80 Series Exit Devices
Intelligent Power-over-Ethernet (PoE) Access Control Rim & Mortise Exit DevicesA . Power-over-Ethernet (PoE) Access Control
Rim & Mortise Exit Devices to be 80 Series as manufactured by SARGENT Manufacturing of New Haven, CT .
B . BHMA certified panic and exit device hardware conforming to ANSI 156 .3, Grade 1 standard and ANSI A117 .1 accessibility guidelines . Electronic motorized locking control of lever handle (solenoids not acceptable) contained completely within the body of the outside trim control . U .L . listed and labeled for either panic or “Fire Exit Hardware” for use on up to 3 hour fire rated openings .1 . Mortise Exit Devices shall utilize a ¾”
anti-friction deadlocking latch and 1” case-hardened steel deadbolt with a 2-3/4” Backset .
C . Power-over-Ethernet intelligent access control locking devices interface using standard IEEE 802 .3af Ethernet for data and power communication directly from the locking unit back to a host server over an existing or newly installed TCP/IP network facilitating centralized control via a Software Development Kit (SDK) to an online electronic access control system without the need for additional interfaces or components (excluding PoE Endspan and Midspan devices) .1 . Provide access control products with
non-volatile memory .D . Fully-encrypted AES-128 (IEEE 802 .3af)
communication between IP Enabled lock and electronic access control system platform via SDK . Programmable time zone periods, blocked holidays, automatic unlock with or without first entry, minimum of 2,400 user codes and the ability to audit the last 10,000 transactions (event type, date, time, user ID and name) . Distributed intelligence allows
stand alone functional operation of lock in absence of network communication or slowdown allowing for system operational redundancy .
E . Integrated reader supports High Coercivity (HiCo) magnetic swipe credentials, HID® 125 kHz proximity credentials or ISO 14443 A/B and ISO 15693 13 .56 MHz contactless credentials: HID® iCLASS / iCLASS SE (full authentication, all formats), MIFARE Classic and DESFire EV1 (full authentication, all formats); NFC (Near Field Communications) and HID® SIO-Enabled™ .1 . Valid/ Invalid credential presentation
viewable by means of LED indicators on outside escutcheon .
2 . Dual factor keypad authentication function optional .
F . Environmental Conditions: Conformally coated weather resistant electronic controller shall meet the following minimum requirements:1 . Operating temperature: -13°F (-25°C) to
151°F (66°C)2 . Operating humidity: < 85%
non-condensing3 . Weatherized design suitable to withstand
harsh environments with a certified rating of IP55
G . Configuration: Programming of time zone periods, blocked holidays, automatic unlock with or without first entry, and listing 10,000 event transaction history consisting of event type, date, time, user ID and name is required .1 . Provide network and lock configuration
CD tool kit for initial lock set-up and programming via USB connection .
H . Monitoring: Software accessible monitoring (via SDK) of inside push rail (Request-to-Exit), integral door position switch (DPS) integral to the lock (door open/closed
status), forced door, unknown card, door held open, battery and tamper .1 . Standard privacy function initiated
from push button on inside escutcheon and cancelled upon activation of valid Request-To-Exit (REX) or user defined credentials .a . Activation of privacy function is
indicated by LED notification on inside escutcheon .
b . Redundant actuation of privacy button does not deactivate privacy mode .
I . Emergency override access capability by mechanical key cylinder retraction of lock latch bolt without electronic activation necessary .1 . Provide keyed cylinder dogging feature
for non-rated panic devices and keyed removable mullions as specified .
J . Inside push bar retracts latch bolt for free egress .
K . Power source: PoE Class 2; Max 7 W .1 . PoE endspan/midspan, electrical hard
wiring, grounding, connections, mounting boxes, and structured cabling framework are required for complete system functionality (by others) .
2 . Network cabling (by others) requirements: Meet or exceed ANSI/TIA/EIA-568-C; CAT5e or higher as set forth by AHJ .
3 . Bonding and grounding requirements: Meet or exceed TIA-607-B to ensure proper operation; connect locking device ground cable to building electrical earth ground .
4 . Network surface mount box: Meet or exceed ANSI/TIA/EIA-568-B; CAT5e or higher (RJ-45) .
L . Cylinders: Reference 2 .04 Keying for keying requirements
1 . Operating temperature: -13°F (-25°C) to 151°F (66°C)
2 . Operating humidity: < 85% non-condensing
3 . Weatherized design suitable to withstand harsh environments with a certified rating of IP55
G . Configuration: Programming of time zone periods, blocked holidays, automatic unlock with or without first entry, and listing 10,000 event transaction history consisting of event type, date, time, user ID and name is required .1 . Provide network and lock configuration
CD tool kit for initial lock set-up and programming via USB connection .
H . Monitoring: Software accessible monitoring (via SDK) of inside lever handle (Request-to-Exit), integral door position switch (DPS)
integral to the lock (door open/closed status), forced door, unknown card, door held open, battery and tamper .1 . Standard privacy function initiated
from push button on inside escutcheon and cancelled upon activation of valid Request-To-Exit (REX) or user defined credentials .a . Activation of privacy function is
indicated by LED notification on inside escutcheon .
b . Redundant actuation of privacy button does not deactivate privacy mode .
I . Emergency override access capability by mechanical key cylinder retraction of lock latch bolt without electronic activation necessary .
J . Inside lever retracts latch bolt .
K . Power source: PoE Class 2; Max 7 W .1 . PoE endspan/midspan, electrical hard
wiring, grounding, connections, mounting boxes, and structured cabling framework are required for complete system functionality (by others) .
2 . Network cabling (by others) requirements: Meet or exceed ANSI/TIA/EIA-568-C; CAT5e or higher as set forth by AHJ .
3 . Bonding and grounding requirements: Meet or exceed TIA-607-B to ensure proper operation; connect locking device ground cable to building electrical earth ground .
4 . Network surface mount box: Meet or exceed ANSI/TIA/EIA-568-B; CAT5e or higher (RJ-45) .
L . Cylinders: Reference 2 .04 Keying for keying requirements
2.1 Passport 1000 P1 8200 Series Mortise Locksets (Continued)
90693:G 4/14/15
Founded in the early 1800s, SARGENT® is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications. The company’s customer base includes commercial construction, institutional, and industrial markets.
Copyright © 2015, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
SARGENT Manufacturing Company 100 Sargent Drive New Haven, CT 06511 USA 800-727-5477 www .sargentlock .com