Post on 31-Dec-2015
Part DrawingsPart Drawings
October 30, 2006October 30, 2006Team MoondogsTeam MoondogsChris Culver Chris Culver Rahul KirtikarRahul KirtikarElias KrauklisElias KrauklisChristopher SampsonChristopher SampsonMichael WiderquistMichael Widerquist
List of Fabricated PartsList of Fabricated Parts
Outer ContainerOuter Container Inner ContainerInner Container Inner Container HolderInner Container Holder LidLid Foot PedalFoot Pedal Master CylinderMaster Cylinder Slave CylinderSlave Cylinder
Pre-Manufactured PartsPre-Manufactured Parts
HingeHinge LatchLatch Check ValveCheck Valve Ball ValveBall Valve Hose (tubing)Hose (tubing) SpringSpring O-ringsO-rings
Check ValveCheck Valve
• Max. Pressure: 500 psi @ 180° F• Male to Male ½”• Part No. 7768K18 (McMaster Carr)
HoseHose
•1/2” ID, 1/16” wall thickness
•Max psi 200
•Tensile Strength 1400 psi
•Part No. 5394K16 (McMaster Carr)
SpringSpring
Part Number McMaster Carr 9657K86
Type Compression Springs
Material Brass
Outside Diameter 3/8"
Wire Size .042"
Overall Length 25/32"
Ends Closed and Ground
Wire Type Round Wire
Load 3.76 lbs.
Deflection at Load .40"
Rate 7.30 lbs./inch
Compressed Length .38"
O-ringsO-ringsMaster Cylinder Part Number: 9559K212
Courtesy: McMaster Carr Website
AS568A Dash Number 225
Type O-Ring
Cross Section Shape Round
Width 1/8"
Actual Width .139"
Inside Diameter 1-7/8"
Actual Inside Diameter 1.859"
Outside Diameter 2-1/8"
Actual Outside Diameter 2.137"
Material PTFE
Part Number: 9559K225
AS568A Dash Number 241
Type O-Ring
Cross Section Shape Round
Width 1/8"
Actual Width .139"
Inside Diameter 3-7/8"
Actual Inside Diameter 3.859"
Outside Diameter 4-1/8"
Actual Outside Diameter 4.137"
Material PTFE
Slave Cylinder