Post on 15-Feb-2021
CompatibleThe DUALOCK® abutments are available for all common implant systems with external and internal connections.
The PEEKNew Retention Design.
Are manufactured in PEEK, improved design resists edge deformation.
Nylon retentionAre manufactured in Nylon.
Overdenture Attachment System
Retention NNylon material
100% COMPATIBLE with male of Zest LOCATOR®.
The System
Abutments The DUALOCK® abutments are available for all common implant systems with external and internal connections. Other types can be produced on demand.
Flexibility:Abutment Straight available in 6 different gingival heights: 1-6 mm.
Abutment Angled with angulation 15º available in 2 different gingival heights : 1.5 - 3.0 mm.
100% COMPATIBLE with Zest LOCATOR®.
DUALOCRetention ZNEW RETENTION DESIGN, improved design resists
edge deformation.
Easy placement for the patient.Are manufactured in PEEK, have better physical
properties and is easier to sanitize than Nylon.
The retention supports up to 40º divergence between implants.
100% COMPATIBLE with male of Zest LOCATOR®.
DUALOCKBar AbutmentAbutment for metal bar.
M2 standard thread.
Abutments
Coping & PositionerAll DUALOCK® abutments include a new coping and positioner system for easy insertion of the abutment to implant, facilitating threading and manipulation by hand.
The DUALOCK® abutments are available for all common implant systems with external and internal conections. Other types can be produced on demand.
The external design assures full compatibility with the Locator’s abutments used for such solutions. This means DUALOCK® Overdenture System is 100% compatible with Zest LOCATOR®.
Abutment Straight available in 6 different gingival heights: from 1 to 6 mm.
Abutment Angled with angulation 15º available in 2 different gingival heights : 1.5 and 3.0 mm.The screw head is hexagonal 1.25 mm.
The abutments are coated with Titanium Nitride (TiN).
Check our compatibility connections list.
ExactnessApply the indicated torque
to the abutment with the torque tool (TORQDS).
Our DUALOCK® abutments are compatible with Zest LOCATOR® instruments, inserts & housings.
New designNew retention design, improved design resists edge deformation.
The DUALOCK® Retention Z are manufactured in PEEK, is a high-performance polymer offers good wear resistance, have better physical
properties and is easier to sanitize than Nylon.
AdvantagesThe new design without central element (considerable advantage with regard to damage) for better clinical functionality and increased wearing comfort and ease of cleaning.
The Retention Z male are machined in a CNC machine and therefore the precision is maximun, unlike Nylon males is injected and is the cause of the deformations.
There are available 3 different retention colours & forces:
Z Black Z Red Z White
Material PEEK PEEK PEEK
Retention Low Medium Strong
Retention Force 1-1,5 lbs 2,5-3 lbs 4,5-5 lbs
Divergence 40º 40º 40º
The Metal Housing is used for Retention Z & Retention N. This advantage allows you to change the worn Nylon male for our new Z male on the denture.
StudiesPEEK, Material of the Future
Internal and independent external(1) studies show good resistence compared to conventional solutions.
(1) Long-term retention behaviour of resin matrix attachment systems for overdentures. Passia et al. Department of Prosthodontics, Propadeutics and Dental Materials, School of Dentistry, Christian-Albrechts University, Kiel, Germany.
5
4
3
2
1
Retention Z
SatisfactionThe DUALOCK® Retention Z represents flexibility for the clinician and comfort for the patient. Clearly less wear and tear as well as servicing expense at the retention inserts.
ToolThe DUALOCK® Tool designed to insert and remove the Retention Z from the Metal Housing.
MORE IMPORTANTUse ONLY our tool (UNIVERDS) for Retentions Z, do not use another tool.
Assembly and disassembly of the Retention Z inserts.
Retention Z
To remove
To insert
Assembly
Disassembly
To insert the retention Z place it on top of the metal housing, face up and press hard to insert into the housing metal straight and parallel until it clicks. The Retention Z insert locks into place on the punch tangibly and audibly.
To remove the retainer Z, insert the part of the tool with the flange into the retention hole. Hold the metal housing with your hand and perform a lever movement to extract it.
100% CompatibilityThe DUALOCK® Retention N male are manufactured in Nylon.Our Nylon male are 100% compatible with Zest LOCATOR®.
There are available differents retention colours & forces.
Extended AngledExtended Angled Retention allows a insertion with up to 40° total divergence.
ToolOur Retentions N are compatible with Zest Locators® tools.
N Black N Red N Blue N Pink N White
Material Nylon Nylon Nylon Nylon Nylon
Retention Force 2 lbs 1-1,5 lbs 1,5 lbs 3 lbs 5 lbs
Divergence 40º 20º 20º 20º
N Red N Orange N Green
Material Nylon Nylon Nylon
Retention Force 1-1,5 lbs 2 lbs 4 lbs
Divergence 40º 40º 40º
Retention N
Abutments
DUALOCK® Abutment See Reference List
Abutment for bar x2 RB10DS
Retention Z Divergence
40º x1 DS00103
40º x4 DS00203
40º x4 DS00303
x2 Red 40º x2 White DS00403
40º x4 DS00603
Retention N Divergence
x1 DS00101
40º x4 DS00200
40º x4 DS00300
20º x4 DS00400
20º x4 DS00500
20º x4 DS00600
40º x4 DS00301
40º x4 DS00302
Accessories
Analog x1 ANADS
Impression Coping x1 IMCDS
Titanium Housing for Z & N x4 DS00750
Silicon spacer x4 DS00800
Torque Tool for wrench x1 TORQDS
Tool Insert & Removal for Retention Z x1 UNIVERDS
Overdenture Attachment System
www.dualocksystem.com