Post on 24-Aug-2020
argentaopening doors
®
argenta®slideSliding door system for interior doors
2argentaopening doors
®
Table of contents
Table of contents
Introduction ................................ 03
Components ............................... 05
argenta®slide for wooden doors ....................... 10
Wooden doors up to 40 kg ..... 10
Wooden doors up to 80 kg ..... 12
Wooden doors up to 160 kg .... 15
Wooden doors up to 240 kg .... 17
Simultaneous accessory sets ....................... 18
Parallel accessory sets ........... 19
argenta®slide for glass doors ...... 20
Simultaneous accessory sets ...... 23
3argentaopening doors
®
Introduction
Argent Alu introduces to you the innovative and con-venient sliding door system argenta®slide for interior doors. This sliding door system can be installed quickly, easily and is reliably.
Using the patented Click-Fix system, the door panel can be attached to the roller assembly in one step, thereby saving a lot of time upon assembly.
Thanks to the patented Soft Stop system, the door is stopped and held in a measured and controlled manner. No more bumping and poorly closing sliding doors!
The argenta®slide system is available for both wooden and glass doors. Simultaneous and parallel fittings are also available.
Argent Alu reserves the right to make technical changes to its products without prior notice.
4argentaopening doors
®
1.
2.
3.
1.
2.
3.
Introduction
The door is stopped and held in a measured and controlled manner. The Soft-Stop is installed in the upper profile, requiring no extra space for concealed mounting.
Soft-Stop (see page 6)
The Click-Fix enables fast installation. The door can be attached to the roller assembly in one step. All preparations can be made in the workshop.
The Click-Fix can be used for concealed and surface mounting.
Click-Fix (see page 5)
5argentaopening doors
®
2
31
2
3
1
2
1
4
Components
Stop & Roller assemblyStandard Stop
The “Standard Stop” has a rail buffer with a catch and rubber shock absorber.
1. mounting screws (2) 2. catch3. shock absorber
The patented “Soft Stop” rail buffer enables solid and shock-free closing. No more bumping and poorly closing sliding doors. The door is stopped and held in a measured and controlled manner. The Soft-Stop is installed in the upper profile, requiring no space for extra mounting.
1. mounting screws (3)2. tilting stopper3. shock absorber4. spring
Soft-Stop
Type Door weight Ø wheels Roller assembly
Classic 40, Click 40, Compact 40 Max. 40 kg Ø 22 mm With hardened steel shaft
Classic 80, Click 80, Compact 80 Max. 80 kg Ø 22 mm With bearings
Classic Soft 80, Click Soft 80, Compact Soft 80 Max. 80 kg Ø 22 mm With bearings
Classic 160, Click 160, Compact 160 Max. 160 kg Ø 28 mm With bearings
Classic 240, Click 240 Max. 240 kg Ø 32 mm With bearings
Roller assembly
The roller assembly (running gear) is made of synthetic (POM) wheels that revolve around enforced steel shafts (for types up to 40 kg) or bearings.
Slow-Stop
The special Slow Stop enables superior shock-free closing. The Slow Stop is a stop system and roller assembly in one and stops the door in a very gentle and controlled manner. The Slow Stop is installed in the upper profile requiring no extra space for mounting. Since the Slow Stop has a very large shock absorber, it can only be used in doors of at least 920 mm.
1. running gear2. shock absorber
6argentaopening doors
®
Components
In the “Classic-Fix” system the mounting plate is screwed on top of the door and the roller assembly is hooked onto this and attached to this.
Mounting optionsClassic-Fix
With the “Click-Fix” the mounting plate is attached with screws on top of the door (surface mounting) or milled into the door (concealed mounting). The door can be attached to the roller assembly in one step as a result of this Click-Fix, enabling fast and reliable assembly. All preparations can therefore be made in the workshop.
Click-Fix
In the “Compact-Fix” system the mounting plate is milled into the door. The door is hooked on the roller assembly and secured. Thanks to the Compact-Fix’ compact size, there is only a minimal amount of free motion between the door and the upper rail.
Compact-Fix
Click-Fix Position
LEFT RIGHT
7argentaopening doors
®
31
33
36.5
3740
44
11.5
6.75
16
15
11
15
Components
Upper profile 40/80
Upper profile for wooden and glass doors with a maximum weight of 80 kg
Length: 3 m, 4 m, 6 m
Material: aluminium
Colour: natural colour anodised
Holes: Ø 5,5 mm, intermediate distance: 270 mm
Profiles
Upper profile 160
Upper profile for wooden doors with a maximum weight of 160 kg
Length: 3 m, 4 m, 6 m
Material: aluminium
Colour: natural colour anodised
Holes: Ø 5,5 mm, intermediate distance: 270 mm
Upper profile 240
Upper profile for wooden doors with a maximum weight of 240 kg
Length: 3 m, 4 m, 6 m
Material: aluminium
Colour: natural colour anodised
Holes: Ø 5,5 mm, intermediate distance: 270 mm
Floor guide 40/80
Floor guide for wooden doors with a max. weight of 80 kg
Length: 1 m, 2 m, 6 m
Material: aluminium
Colour: untreated aluminium
Holes: Ø 5,5 mm, intermediate distance: 270 mm
Floor guide 160/240
Floor guide for wooden doors with a max. weight of 240 kg
Length: 1 m, 2 m, 6 m
Material: aluminium
Colour: untreated aluminium
Holes: Ø 5,5 mm, intermediate distance: 270 mm
8argentaopening doors
®
15.6
68.1
15.6
115
Components
Cover profile (wooden doors)
Cover profile to aesthetically cover the upper profiles (guiding rail) and the full guiding system (mounting, stop, roller assembly) in wooden doors.
Length: 3 m, 4 m, 6 m
Material: aluminium
Colour: natural colour anodised, powder coated in RAL colours (available on demand)
Cover profile (glass doors)
Cover profile to aesthetically cover the upper profiles (guiding rail) and the full guiding system (mounting, stop, roller assembly) in glass doors.
Length: 3 m, 4 m, 6 m
Material: aluminium
Colour: natural colour anodised, powder coated in RAL colours (available on demand)
Cover profile for glass catch
Cover profile to aesthetically cover the glass catches in glass doors.
Length: 2 m, 3 m
Material: aluminium
Colour: natural colour anodised, powder coated in RAL colours (available on demand)
9argentaopening doors
®
Components
The drilled upper profiles 40/80, 160 and 240 can be mounted directly on the ceiling. Thanks to the wall brackets, these upper profiles can also be mounted onto the wall. The wall brackets need to be installed at 30 cm intervals.
Two types are available:- type 40/80 for doors with a maximum weight of 80 kg- type 160/240 for doors with a maximum weight of 240 kg.
The wall brackets can be used for upper profiles on both wooden and glass doors.
Wall brackets
10argentaopening doors
®
A set “Classic 40” set consists of: 2x Classic-Fix 40 2x roller assembly Classic 40 2x Standard Stop 1x floor guide
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
A “Classic 40” set is also available as a kit with upper profile 40/80 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
A set “Click 40” set consists of: 2x Click-Fix 40 2x roller assembly Click 40 2x Standard Stop 1x floor guide 1x wrench
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
Click 40
Wooden doors up to 40 kgClassic 40
Sliding door fittings - wooden doors
11argentaopening doors
®
A set “Compact 40” set consists of: 2x Compact-Fix 40 2x roller assembly Compact 40 2x Standard Stop 1x floor guide 1x wrench
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
Compact 40
Sliding door fittings - wooden doors
12argentaopening doors
®
A set “Classic 80” set consists of: 2x Classic-Fix 80 2x roller assembly Classic 80 2x Standard Stop 1x floor guide*
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
A “Classic 80” set is also available as a kit with upper profile 40/80 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
Wooden doors up to 80 kgClassic 80
A set “Classic Soft 80” set consists of: 2x Classic-Fix 80 2x roller assembly Classic Soft 80 2x Soft-Stop 1x floor guide*
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
A “Classic 80” set is also available as a kit with upper profile 40/80 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
Classic Soft 80
Sliding door fittings - wooden doors
* For non-residential applications we recommend the use of the optional ‘project-floor guide 160/240’
(always in combination with the floor guide profile 160/240)
13argentaopening doors
®
A set “Click 80” set consists of: 2x Click-Fix 80 2x roller assembly Click 80 2x Standard Stop 1x floor guide* 1x wrench
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
A “Click 80” set is also available as a kit with upper profile 40/80 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
Click 80
A set “Click Soft 80” set consists of: 2x Click-Fix 80 2x roller assembly Click Soft 80 2x Soft-Stop 1x floor guide* 1x wrench
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
A “Click Soft 80” set is also available as a kit with upper profile 40/80 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
Click Soft 80
Sliding door fittings - wooden doors
A set “Click slow” consists of: 2x Click-Fix 80 2x roller assembly & stop: Slow Stop 80 1x floor guide* 1x wrench
Click Slow 80
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
14argentaopening doors
®
Sliding door fittings - wooden doors
A set “Compact 80” set consists of: 2x Compact-Fix 80 2x roller assembly Compact 80 2x Standard Stop 1x floor guide* 1x wrench
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
A “Compact 80” set is also available as a kit with upper profile 40/80 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
Compact 80
A set “Compact Soft 80” set consists of: 2x Compact-Fix 80 2x roller assembly Compact Soft 80 2x Soft-Stop 1x floor guide* 1x wrench
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
A “Compact Soft 80” set is also available as a kit with upper profile 40/80 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
Compact Soft 80
A set “Compact Slow” consists of: 2x Compact -Fix 80 2x roller assembly & stop: Slow Stop 80 1x floor guide* 1x wrench
Compact Slow 80
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
15argentaopening doors
®
Sliding door fittings - wooden doors
Wooden doors up to 160 kgClassic 160
A set “Classic 160” set consists of: 2x Classic-Fix 160/240 2x roller assembly Classic 160 2x Standard Stop 1x floor guide
Optional:- upper profile 160- wall bracket 160/240- floor guide profile 160/240
A “Classic 160” set is also available as a kit with upper profile 160 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
A set “Click 160” set consists of: 2x Click-Fix 160 2x roller assembly Click 160 2x Standard Stop 1x floor guide
Optional:- upper profile 160- wall bracket 160/240- floor guide profile 160/240
A “Click 160” set is also available as a kit with upper profile 160 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
Click 160
16argentaopening doors
®
A set “Compact 160” set consists of: 2x Compact-Fix 160 2x roller assembly Compact 160 2x Standard Stop 1x floor guide
Optional:- upper profile 160- wall bracket 160/240- floor guide profile 160/240
A “Compact 160” set is also available as a kit with upper profile 160 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
Compact 160
Sliding door fittings - wooden doors
17argentaopening doors
®
Wooden doors up to 240 kgClassic 240
A set “Classic 240” set consists of: 2x Classic-Fix 160/240 2x roller assembly Classic 240 2x Standard Stop 1x floor guide
Optional:- upper profile 240- wall bracket 160/240- floor guide profile 160/240
A “Classic 240” set is also available as a kit with upper profile 160 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
A set “Click 240” set consists of: 2x Click-Fix 240 2x roller assembly Click 240 2x Standard Stop 1x floor guide
Optional:- upper profile 240- wall bracket 160/240- floor guide profile 160/240
A “Click 240” set is also available as a kit with upper profile 160 of 1500, 1800, 2100 or 2400 mm (for doors that measure 750, 900, 1050 or 1200 mm respectively).
Click 240
Sliding door fittings - wooden doors
18argentaopening doors
®
These simultaneous accessory sets are designed to enable opening and closing of two doors simultaneously (up to 80 kg per door panel), whereby one slides to the left and the other to the right.
A “Simultaneous accessory set” consists of: 2x pulley with stop 2x carrier 1x clad steel cable 2x “Classic 80” set
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
Simultaneous accessory sets (for wooden doors up to 80 kg)
pulley with stop
carrier
clad steel cable (10 m)
Illustration for installation of accessories for the simultaneously opening doors.
• Left Panel
• Right Panel
Sliding door fittings - wooden doors
19argentaopening doors
®
This parallel accessory set is designed to enable opening and closing of two doors simultaneously (up to 80 kg per door panel), that slide to the left or to the right.
A “Parallel accessory set for 2 door panels” consists of: 1x floor guide 2x buffer 1x adjustable floor guide 2x “Classic 80” set
A “Parallel accessory set for 3 door panels” consists of: 1x floor guide 4x buffer 2x adjustable floor guide 3x “Classic 80” set
Optional:- upper profile 40/80- wall bracket 40/80- cover profile- floor guide profile 40/80
Parallel accessory sets (for wooden doors up to 80 kg)
floor guide
buffer
adjustable floor guide
Sliding door fittings - wooden doors
20argentaopening doors
®
1.
2.
3.
4.
Sliding door fittings - glass doors
Thanks to these specially designed glass sets, glass doors can be attached to the argenta® slide sliding door system. Three types of glass sets are available; for 8, 10 or 12 mm glass doors. Suitable for both single and double glazing. The mounting system Click-Fix fits in these glass sets with either the Standard or the Soft-Stop.
Glass door panels of up to 60 kg can easily be installed with glass catches. We do recommend to drill Ø 12 mm holes in door panels of more than 60 kg and to secure the glass catches with the included plastic installation components.
A glass set consists of: 2x glass catch (1) 4x end piece (2) 1x guide (3) 4x synthetic catch cover (4) 2x plastic installation component (5)
Glass sets
21argentaopening doors
®
Sliding door fittings - glass doors
8 mm glass doorsClick 8A “Click 8” set consists of: 2x Click-Fix 2x roller assembly Click 80 2x Standard Stop 1x wrench
and should be combined with: 1x glass set for 8 mm
Click Soft 8A “Click Soft 8” set consists of: 2x Click-Fix 2x roller assembly Click Soft 80 2x Soft-Stop 1x wrench
and should be combined with: 1x glass set for 8 mm
Optional:- upper profile 40/80- wall bracket 40/80- cover profile (for upper rail on glass doors)- cover profile for glass catch
10 mm glass doorsClick 10A “Click 10” set consists of: 2x Click-Fix 2x roller assembly Click 80 2x Standard Stop 1x wrench
and should be combined with: 1x glass set for 10 mm
Click Soft 10A “Click Soft 10” set consists of: 2x Click-Fix 2x roller assembly Click Soft 80 2x Soft-Stop 1x wrench
and should be combined with: 1x glass set for 10 mm
Optional:- upper profile 40/80- wall bracket 40/80- cover profile (for upper rail on glass doors)- cover profile for glass catch
22argentaopening doors
®
Ceiling mounting 8, 10 and 12 mm
12 mm glass doorsClick 12A “Click 12” set consists of: 2x Click-Fix 2x roller assembly Click 80 2x Standard Stop 1x wrench
and should be combined with: 1x glass set for 12 mm
Click Soft 12A “Click Soft 12” set consists of: 2x Click-Fix 2x roller assembly Click Soft 80 2x Soft-Stop 1x wrench
and should be combined with: 1x glass set for 12 mm
Optional:- upper profile 40/80- wall bracket 40/80- cover profile (for upper rail on glass doors)- cover profile for glass catch
Sliding door fittings - glass doors
23argentaopening doors
®
These simultaneous fittings serve to enable simultaneous opening and closing of two glass doors (up to 80 kg per panel), whereby one panel slides to the left and the other slides to the right.
A “Simultaneous accessory glass set” consists of: 2x pulley with stop 2x carrier 1x clad steel cable 4x roller assembly Click 80 4x Click-fix 4x Standard Stop 2x glass set for 8, 10 or 12 mm
Optional:- upper profile 40/80- wall bracket 40/80- cover profile (for upper rail on glass doors)- cover profile for glass catch
Simultaneous accessory sets (for glass doors)
Pulley with stop
Catcher
Clad steel cable 10 m
Roller assembly Click + Click-Fix + Standaard Stop
Sliding door fittings - glass doors
argentaopening doors
®
© L
3005
042
12/
13 E
ngel
s
Argent Alu nv, member of the Renson-group
nv RENSON® sa | IZ 2 Vijverdam | Maalbeekstraat 10 | 8790 Waregem | BelgiumT +32 (0)56 62 71 11 | F +32 (0)56 60 28 51 | info@renson.net | www.renson.eu
Argent Alu: THE reference for opening doors
Founded in 1909, Argenta Alu nv– more commonly known
by the brand name argenta® – has been developing and
producing hinges for interior doors for over 100 years.
Argent Alu can offer you a wide range of door hardware
thanks to a persistent vertical integration. Besides its
own development division and test laboratory Argent Alu
also manages other processes in-house such as: mold
manufacturing, plastic injection molding, production,
aluminium processing, anodization, powder coating and
assembly. Our local sales teams assist our distributors
where possible and follow market developments closely.
Our wide selection of products includes:
- Concealed hinges invisible®
- Hinges in all sizes, colours and models (both modern
and country style)
- Indoor sliding door fittings argenta®slide for wooden and
glass doors
- A wide selection of window and shutter fittings
- Invisible door frame invisidoor®