Post on 26-Apr-2020
Im Auftrag des Insolvenzverwalters sowie der
Berechtigten versteigern wir online gegen Höchstgebot
den kompletten Maschinenpark aus den Bereichen
Vorbehandlung, Färberei und Veredelung der
Unternehmensgruppe Lauffenmühle
On behalf of the insolvency administrator as well as
entitled parties, we are auctioning online against
highest bid the comprehensive machinery from the
sections pre-treatment, dyeing and finishing of the
Lauffenmühle company group
Lauffenmühle GmbH & Co. KGBeim Haagensteg 479541 Lörrach (Germany)
Donnerstag, 10. Oktober 2019Beginn: 09.00 Uhr
Thursday, 10. October 2019Start: 09.00 a. m.
Besichtigung:
Dienstag, 24.September 2019
Mittwoch 25.September 2019
jew. von 10 bis 17:00 Uhr
Viewing:
Tuesday, 24.September 2019
Wednesday, 25.September 2019
each from 10 a.m. to 5 p.m.
Eine Gebotsabgabe ist ab sofort online möglich!
Online bidding is possible immediately!
www.netbid.com
ONLINEAUKTION
ONLINEAUCTION
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
79541 Lörrach, Beim Haagensteg 4/ Schlosserwerkstatt
706 1 Doppelschleifbock, Fabr. AEG, Schleifscheiben-Ø 250 mm, Ständer
1 double-sided stand grinder, make AEG, grinding wheel Ø 250 mm, stand grinder
707 1 Doppelschleifbock, Fabr. Rema, Schleifscheiben-Ø 300 mm
1 double-sided stand grinder, make Rema, grinding wheel Ø 300 mm
708 1 Horizontal-Bandschleifmaschine, Fabr. Metallkraft, Typ 75/200, Ser.-Nr. 2008163-5
1 horizontal belt grinding machine, make Metallkraft, type 75/200, serial no. 2008163-5
709 1 Punktschweißzange, Fabr. Messer Griesheim, Typ MG 200PZ, 2 kVA
1 spotwelding gun, make Messer Griesheim, type MG 200PZ, 2 kVA
710 1 Universal-Fräsmaschine, Fabr. Mikron, Typ WF62C, Bj. 1995, Tischabm. 300 x 1.400 mm, Maschinenschraubstock, Steuerung, Fabr. Heidenhain, Typ TNC355, Schrank, 2-türig
1 universal milling machine, make Mikron, type WF62C, built 1995, bed dim. 300 x 1,400 mm, machine vice, control system, make Heidenhain, type TNC355, cabinet, 2 doors
711 1 Kugellager-Induktions-Anwärmgerät, Fabr. FAG, m. Holzkiste
1 ball bearing induction pre-heating unit, make FAG, w. wooden box
712 1 Schmiedeesse
1 Schmiedeesse
713 1 Werkbankanlage, L 4.000 mm, 2 Schraubstöcke, Unterbau
1 workbench system, L 4,000 mm, 2 vices, base
714 2 Schweißtische, 1.000 x 2.000 mm
2 welding tables, 1,000 x 2,000 mm
715 1 Schweißtrafo, Fabr. EWM, Typ 180 AC/DC, Transportwagen
1 welding transformer, make EWM, type 180 AC/DC, trolley
716 1 Werkbankanlage, Metall/Holz, L 5.000 mm 2 Schraubstöcke, Unterbau, Schlagschere, Rohrbieger
1 workbench system, metal/wood, L 5,000 mm, 2 vices, base unit, gate shears, pipe bending machine
717 1 Schutzgasschweißgerät, Fabr. Ess, Typ MIG MAG 302 M
1 inert gas welding set, make Ess, type MIG MAG 302 M
720 1 Bügelsäge, Fabr. Kasto, Typ UBS 320, Bj. 1974,
Sägeblattlänge ca. 400 mm
1 hacksaw, make Kasto, type UBS 320, built 1974, saw blade length approx. 400 mm
721 1 Hydraulik-Werkstattpresse, Durchlass zw. Säulen 800 mm, Handhydraulikzylinder
1 hydraulic workshop press, passage betw. pillars 800 mm, manual hydraulic cylinder
723 1 elektrische Rohrbiegemaschine, auf 3-Beinstativ
1 electr. pipe bending machine, on tripod
723/1 6 Kettenzüge, m. Schrank
6 chain hoists, w. cabinet
724 1 Amboss, L 800 mm, Unterbau
1 anvil, L 800 mm, base unit
726 1 Vertikal-Stoßmaschine, Tischabm. 250 x 500 mm, 3-Backenfutter
1 vertical slotting machine, bed dim. 250 x 500 mm, three-jaw chuck
727 1 L+Z-Drehmaschine, Fabr. EX-CELL-O, Typ XD 500 N, Bj. 1975, Ser.-Nr. 1070416000, Spitzenhöhe/-weite 200 x 1.000 mm, 3-Backenfutter, Schnellwechselhalter, Reitstock, Stahlblechschrank, 1-türig
1 sliding and screw cutting lathe, make EX-CELL-O, type XD 500 N, built 1975, serial no. 1070416000, height of centers/distance between centers 200 x 1,000 mm, three-jaw chuck, quick-exchange tool holder, tailstock, sheet steel cabinet, 1 door
728 1 Säulenbohrmaschine, Fabr. Flott, Tischabm. 200 x 200 mm
1 pillar drilling machine, make Flott, bed dim. 200 x 200 mm
729 1 Holzschrank, Inhalt: Schneideisen, Gewindebohrer, Spiralbohrer u.a.m.
1 wooden cabinet, content: threading dies, tap drills, twist drills and other items
730 1 L+Z-Drehmaschine, Fabr. Voest, Typ DA 360, Spitzenhöhe/-weite 300 x 4.000 mm, 3-Backenfutter, Lünette, Reitstock, Schnellwechselhalter, Teleskopschubladenschrank, Inhalt: Maschinenzubehör
1 sliding and screw cutting lathe, make Voest, type DA 360, height of centers/distance between centers 300 x 4,000 mm, three-jaw chuck, back rest, tailstock, quick-exchange tool holder, telescopic drawer cabinet, content: machine accessories
731 1 Säulenbohrmaschine, Fabr. Alzmetall, Typ AX 3 S, Bj. 1981, Ser.-Nr. 2890, Schraubstock, Teleskopschubladenschrank
1 pillar drilling machine, make Alzmetall, type AX 3 S, built 1981, serial no. 2890, vice, telescopic drawer cabinet
733 1 Werkbankanlage, Metall/Holz, L 6.000 mm, m. 4 Schraubstöcke, Unterbau
1 workbench system, metal/wood, L 6,000 mm, w. 4 vices, base unit
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
734 1 L+Z-Drehmaschine, Fabr. Matra, Typ XD 25, Ser.-Nr. 3027, Spitzenhöhe/-weite 200 x 1.500 mm, 3-Backenfutter, Schnellwechselhalter, Reitstock
1 sliding and screw cutting lathe, make Matra, type XD 25, serial no. 3027, height of centers/distance between centers 200 x 1,500 mm, three-jaw chuck, quick-exchange tool holder, tailstock
735 2 Holzschränke, 2.000 x 2.000 mm, Inhalt: Maschinenzubehör, Werkzeuge: Gewindebohrer, Steckschlüssel, Abzieher u.a.m.
2 wooden cabinets, 2,000 x 2,000 mm, content: machine accessories, tools: tap drills, socket wrenches, pull-off devices and other items
736 1 elektrische Bügelsäge, Fabr. MEP, Typ PH 211
1 electr. hacksaw, make MEP, type PH 211
737 1 Kastenbohrmaschine, Fabr. Reinhold, Kreuztisch, Schraubstock
1 box column drilling machine, make Reinhold, cross table, vice
738 3 Alu-Klappleitern, je 8-stufig
3 aluminium folding ladders, each w. 8 steps
741 1 Magnetständerbohrmaschine, Fabr. Metabo
1 magnetic pillar drilling machine, make Metabo
79541 Lörrach, Beim Haagensteg 4/ Schlosserwerkstatt/ Nebenraum
747 1 Werkbank, 2 Schraubstöcke, Unterbau
1 workbench, 2 vices, base unit
748 1 Teleskopschubladenschrank, 5 Auszüge, 2 Stahlblechschränke, Inhalt: Maschinenzubehör, DIN-/Normteile
1 telescopic drawer cabinet, 5 drawers, 2 sheet steel cabinets, content: machine accessories, DIN/standard parts
749 1 Werkstattkiste, fahrbares Untergestell, Inhalt: Handarbeitswerkzeuge
1 workshop box, mobile base frame, content: manual tools
750 1 Reinigungsbecken, L 600 mm, m. Fass-Untergestell
1 cleaning trough, L 600 mm, w. drum base frame
751 1 Schweißflaschen-Transportwagen, stahlbereift, m. Manometer, Schlauch, Brenner, ohne Flaschen
1 welding cylinder trolley, steel wheels, w. manometer, hose, burner, w/o cylinders
752 1 Werkzeug-Schleifmaschine, Fabr. Solid
1 tool grinding machine, make Solid
753 1 Schutzgasschweißgerät, Fabr. Messer Griesheim, Typ Euromag 35, aufgesetzter Drahtvorschub
1 inert gas welding set, make Messer Griesheim, type Euromag 35, attached wire feed
754 1 Schweißtrafo, Fabr. Zinser, Schweißtisch, 800 x 1.200 mm, Schraubstock
1 welding transformer, make Zinser, welding table, 800 x 1,200 mm, vice
79541 Lörrach, Beim Haagensteg 4/ Übergang Kesselhaus
755 1 Vertikal-Bandsäge, Fabr. Vogtmann, Typ 700, Bj. 1985
1 vertical band saw, make Vogtmann, type 700, built 1985
756 1 Schwenkbiegemaschine, Arbeitsbreite 1.900 mm, Materialstärke max. 4 mm
1 folding machine, working width 1,900 mm, max. material thickness 4 mm
757 1 Drehmaschine, Spitzenhöhe/-weite 500 x 4.000 mm
1 lathe, height of centers/distance between centers 500 x 4,000 mm
758 1 Schlagschere, Fabr. Fasti, Typ 505, Schneidlänge 1.000 mm
1 gate shears, make Fasti, type 505, cutting length 1,000 mm
759 1 Diesel-Notstromaggregat, Fabr. Leroy Somer, Typ 44-OL.8, Bj. 1990, 92 kW, 115 kVA
1 Diesel emergency power generator, make Leroy Somer, type 44-OL.8, built 1990, 92 kW, 115 kVA
760 1 mechanische 3-Walzen-Rundbiegemaschine, Arbeitsbreite 1.000 mm
1 mechanical 3-roller sheet metal bending machine, working width 1,000 mm
760/1 1 Posten Elektro-Motoren, Schieber, Ventile
1 Posten electr. motors, pusher units, valves
761 1 Dampfkessel, Fabr. Standard Kessel, Bj. 2006, Ser.-Nr. 21593, Dampfleistung 12 t/h, Druck max. 18 bar, Gasbrenner, Fabr. Saacke, Wärmetauscher
1 steam boiler, make Standard Kessel, built 2006, serial no. 21593, steam capacity 12 t/h, max. pressure 18 bar, gas burner, make Saacke, heat exchanger
761/1 1 Wasserbereitungsanlage, 2 Enthärtungsfilter, Vorratsbehälter, 2 Grundwasserpumpen
1 water treatment system, 2 softening filters, storage tank, 2 ground water pumps
761/2 2 Alu-Schiebeltiern
2 aluminium sliding ladders
761/3 1 Schweißtrafo, Fabr. Kemppi, Typ Master 2200
1 welding transformer, make Kemppi, type Master 2200
761/4 1 Bohrhammer, Fabr. Hilti, Typ TE 75
1 impact drilling machine, make Hilti, type TE 75
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
761/5 2 Akkuschrauber, Fabr. Hilti, 2 Winkelschleifer, Kabeltrommel, Stichsäge
2 cordless screwdriver, make Hilti, 2 angle grinders, cable drum, jigsaw
761/6 1 Bohrhammer, Fabr. Hilti, Typ TE 22
1 impact drilling machine, make Hilti, type TE 22
761/7 3 Elektro-Kettenzüge
3 electr. chain hoists
79541 Lörrach, Beim Haagensteg 4/ Kompressorraum
762 1 Schraubenkompressor, Fabr. Boge, Typ SLF 101, Bj. 2013, Leistung 75 kW, frequenzgeregelt
1 screw compressor, make Boge, type SLF 101, built 2013, power 75 kW, frequency-controlled
763 1 Schraubenkompressor, Fabr. Kaeser, Typ CS 91
1 screw compressor, make Kaeser, type CS 91
764 1 Schraubenkompressor, Fabr. Kaeser, Typ CS 91, Bj. 2000, Ser.-Nr. 1002, Leistung 55 kW, 8 bar
1 screw compressor, make Kaeser, type CS 91, built 2000, serial no. 1002, power 55 kW, 8 bar
765 1 Schraubenkompressor, Fabr. Kaeser, Typ CS 91, Bj. 2001, Ser.-Nr. 1001, Leistung 55 kW, 8 bar
1 screw compressor, make Kaeser, type CS 91, built 2001, serial no. 1001, power 55 kW, 8 bar
766 1 Kältetrockner, Fabr. Parker Hiross, Typ PST 180, Bj. 2015, Ser.-Nr. 940003
1 refrigeration dryer, make Parker Hiross, type PST 180, built 2015, serial no. 940003
767 1 Kältetrockner, Fabr. Hiross, Typ Polestar, Bj. 2006, Ser.-Nr. 3192420001
1 refrigeration dryer, make Hiross, type Polestar, built 2006, serial no. 3192420001
79541 Lörrach, Beim Haagensteg 4/ Elektrowerkstatt
768 1 Tischbohrmaschine
1 bench drilling machine
769 1 Doppel-Werkbankanlage, L 3.000 mm, Druckluft-/Stromanschlüssen, Unterbau
1 double workbench system, L 3,000 mm, compressed air/power sockets, base unit
770 1 Werkbankanlage, L 4.000 mm, 3 Teleskop-Unterschränke
1 workbench system, L 4,000 mm, 3 telescopic base cabinets
771 3 Arbeitstische, unterschiedl. Ausführungen
3 work tables, diff. types
79541 Lörrach, Beim Haagensteg 4/ Büro
771/1 1 Doppelschleifbock, Fabr. Flott
1 double-sided stand grinder, make Flott
79541 Lörrach, Beim Haagensteg 4/ Elektrowerkstatt
772 1 Werkbankanlage, L 5.000 mm, 3 Teleskopunterbauten
1 workbench system, L 5,000 mm, 3 telescopic base units
773 1 Arbeitstisch, winkelförmig, Unterbau, 3 Auszüge
1 work table, angular design, base unit, 3 drawers
79541 Lörrach, Beim Haagensteg 4/ Büro
774 1 Schreibtisch, Schrank,Inhalt, Stuhl
1 office desk, cabinet, content, chair
776 1 Laserdrucker, Fabr. Kyocera, Typ FS-1370dn
1 laser printer, make Kyocera, type FS-1370dn
777 1 Elektro-Kettenzug, Fabr. Stahl, Tragfähigkeit 250 kg
1 electr. chain hoist, make Stahl, load capacity 250 kg
79541 Lörrach, Beim Haagensteg 4/ Keller
778 20 lfm. Metallregal, Inhalt, Kabel
20 lfm. metal shelf, content, cables
79541 Lörrach, Beim Haagensteg 4/ OG
780 1 Posten Ersatz-Elektromotoren/Getriebe, Kunststoff-Kabelrohre
1 Posten spare electric motors/gear boxes, plastic cable conduits
780/1 1 Posten Ersatzteile für Spannrahmen, u.a.m., 14 Lagerregale, 5 Ebenen
1 Posten spare parts for stenter frames, a.m.o., 14 storage shelves, 5 levels
780/2 1 Posten Ersatzteile DIN-Normteile, 5 Lagerregale
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
1 Posten spare parts - DIN standard parts, 5 storage shelves
79541 Lörrach, Beim Haagensteg 4/ Produktion
784 1 Sanforisieranlage, Fabr. Monforts, Typ Monroftex, Bj. 2008, best. aus: Einlauf m. Warenmulde, Dämpfzylinder, Gummikalander, Krumpfeinrichtung, Filzkalandar, Kühlzylinder, Kantendrucker, Typ Rea-Jet HR, Etikettendrucker, Bj. 2016, Warenmulde, Auslauf m. Wickeleinrichtung, Arbeitsbreite 1.800 mm, Easyinspect-Messmaschine, Fabr. Dr. Schenk, Bj. 2015, m. 2 Kameras, 8K, Materialbreite 1.800 mm, Transmission Hellfeld, Reflexion Dunkelfeld
1 sanforizing system, make Monforts, type Monroftex, built 2008, incl.: infeed w. fabric trough, steaming cylinder, rubber calender, shrinking unit, felt calender, cooling cylinder, selvedge printer, type Rea-Jet HR, label printer (2016), fabric trough, delivery w. reeling unit, working width 1,800 mm, easyinspect measuring machine, make Dr. Schenk (2015), w. 2 cameras, 8K, material width 1,800 mm, transmission bright field, reflexion dark field
786 1 Krumpftrockner, Fabr. Santex, Bj. 1987, Ser.-Nr. 2.000, 3-Etagentrockner, Fabr. Santex, dampfbeheizt, Ser.-Nr. 2.172, Kaulenwickler, Fabr. Santex, Feuchtigkeitsmessgerät, Fabr. Mahlo, Typ RMSR-7 S, Abluftfeuchte-Regelanlage, Fabr. Mahlo, Typ AMLR-7 S, Ioniesationsgerät, Fabr. Eltex, Bahnlaufregler, Breitstreckregelwalze, Fabr. Erhardt & Leimer, Typ BR 0110, Bj. 1994, 8 Kaulbock
1 shrinking dryer, make Santex, built 1987, serial no. 2.000, 3-level dryer, make Santex, steam-heated, serial no. 2.172, fabric roll winder, make Santex, moisture measuring device, make Mahlo, type RMSR-7 S, exhaust air moisture control system, make Mahlo, type AMLR-7 S, ionization device, make Eltex, web guiding system, rotary stretcher, make Erhardt & Leimer, type BR 0110 (1994), 8 stands for fabric rolls
787 1 Rauhmaschine, Fabr. Vollenweider Xetma, Typ Multisystem XREB, Bj. 2003, Ser.-Nr. 128.0442/NB 2200, kontinuierlicher Einlauf, Arbeitsbreite 2.200 mm, Aufrauh-Mehrfachtrommelsystem, Umlenkung, Aufspulvorrichtung
1 napping machine, make Vollenweider Xetma, type Multisystem XREB, built 2003, serial no. 128.0442/NB 2200, continuous infeed, working width 2,200 mm, multidrum raising/napping system, diversion unit, reeling unit
788 1 Spannrahmen (4), Fabr. Brückner, Typ HN-SFP-20/10-976, Bj. 2008, Ser.-Nr. 4.331, 10 Heizzonen, gasbeheizt, Heizleistung 9,87 kW, Gesamtheizleistung 3.220 kW, Arbeitsbreite 1.800 mm, Kettensystem, kontinuierlicher Einlauf, Wanne, Foulard, Fabr. Brückner, Typ Powerpad, Schussfaden-Richtgerät, Fabr. Mahlo, Typ Orthomat, Bahnkantenführung, Heizzonenüberwachung, Typ Optiheat, Abluftfeuchte-Mess-/Regelanlage, Fabr. Pleva, Typ RR 1 P, kontinuierlicher Auslauf
1 stenter frame (4), make Brückner, type HN-SFP-20/10-976, built 2008, serial no. 4.331, 10 heating zones, gas-heated, heating power 9.87 kW, total heating power 3,220 kW, working width 1,800 mm, chain system, continuous infeed, trough, padding machine, make Brückner, type Powerpad, weft yarn straightener, make Mahlo, type Orthomat, web edge guiding system, heating zone monitoring system, type Optiheat, exhaust air moisture measuring and control system, make Pleva, type RR 1 P, continuous discharge
789 1 Spannrahmen (2), Fabr. Stentex, Typ Stentotherm 3300, Bj. 1997, Ser.-Nr. 940/0334/00, Arbeitsbreite max. 2.000 mm, 12 Heizfelder, gasbeheizt, Kettensystem, Arbeitsgeschwindigkeit 5 - 100 m/Min., kontinuierlicher Einlauf, Wanne, 2-Walzen-Hochleistungsquetschwerk, Schussfadenrichtgerät, Fabr. Mahlo, Typ RFMC 74 AN, Abluftregelanlage, Fabr. Mahlo, Typ Ecoma AML-7, 2 Appretbehälter, Dampflöscheinrichtung, Fabr. Wiese, kontinuierlicher Auslauf, Wanne
1 stenter frame (2), make Stentex, type Stentotherm 3300, built 1997, serial no. 940/0334/00, max. working width 2,000 mm, 12 heating fields, gas-heated, chain system, working speed 5-100 m/min., continuous infeed, trough, 2-roller heavy duty squeezing machine, weft yarn straightener, make Mahlo, type RFMC 74 AN, exhaust air control system, make Mahlo, type Ecoma AML-7, 2 finishing agent tanks, steam extinguishing system, make Wiese, continuous discharge, trough
790 1 Spannrahmen (S1), Fabr. Brückner, Typ Split, Bj. 2001, Arbeitsbreite 1.800 mm, Kettensystem, 11 Felder, Wareneinlauf, Großdockenabwicklung, Warenspeichermulde, 2 separate Abwickelstellen, Planlaufregelung m. Mittenführung, 2 Walzenfoulard, B 2.000 mm, Fabr. Küsters, Schussfaden-Richtgerät, Fabr. Bianco, Abluftmess-/regelanlage, Fabr. Pleva, Richtgerät, Prozesssteuerung, Typ PVS, Wärmerückgewinnungsanlage, gasbeheizt
1 stenter frame (S1), make Brückner, type Split, built 2001, working width 1,800 mm, chain system, 11 fields, fabric infeed, large batch unwinder system, fabric storage trough, 2 separate unwinding stations, runout control w. center guiding system, 2-roll padder, W 2,000 mm, make Küsters, weft yarn straightener, make Bianco, exhaust air measuring/control system, make Pleva, straightening device, process control system, type PVS, heat recovery plant, gas-heated
791 1 Mercerisieranlage, Fabr. Benninger, Bj. 1997, best. aus: Kettensystem, kontinuierlichem Einlauf, Fabr. Benninger, Bj. 1983, Ser.-Nr. 64861-63, Wanne, Fassungsverm. 480 m, Waschteil, Fabr. Benninger, Typ Extracta N 3, Bj. 1988, Ser.-Nr. 70073-75, Fassungsverm. 15 m, Waschteil, Fabr. Benninger, Typ Extracta N 3, Bj. 1988, Ser.-Nr. 70073-75, Fassungsverm. 15 m, Waschabteil, Fabr. Benninger, Typ Bicoflex N 6-2, Bj. 1983, Ser.-Nr. 64861-63, Fassungsverm. 30 m, Merzerisierteil, Fabr. Benninger, Typ NGA 11-S/1 ETKB, Bj. 1984, Ser.-Nr. 65837-40, Fassungsverm. 33 m, Merzerisierteil, Fabr. Benninger, Typ NGA 11-S/1 ETKB, Bj. 1984, Ser.-Nr. 65837-40, Fassungsverm. 33 m, Merzerisierteil, Fabr. Benninger, Typ NGA 11-S/1 ETKB, Bj. 1984, Ser.-Nr. 65837-40,
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
Fassungsverm. 33 m, Stabilisierteil, Fabr. Benninger, Bj. 1984, Ser.-Nr. 65837-40, Fassungsverm. 7.500 mm, Stabilisierteil, Fabr. Benninger, Bj. 1984, Ser.-Nr. 65837-40, Fassungsverm. 7.500 mm, Waschabteil, Fabr. Benninger, Typ Extracta N 6, Bj. 1984, Ser.-Nr. 65837-40, Fassungsverm. 30 m, Waschabteil, Fabr. Benninger, Typ Extracta N 3, Bj. 1977, Ser.-Nr. 58948-49, Fassungsverm. 15 m, Imprägnierteil, Fabr. Benninger, Typ Extracta N 3, Bj. 1977, Ser.-Nr. 58948-50, Fassungsverm. 15 m, Waschabteil, Fabr. Benninger, Typ Extracta H 4, Bj. 1977, Ser.-Nr. 58948-49, Fassungsverm. 20 m, Waschabteil, Fabr. Benninger, Typ Extracta H 4, 1 Abteil m. 2 Turbowalzen, Fabr. Goller, Typ Unipulsa, Bj. 1999, Ser.-Nr. 9579, Fassungsverm. 20 m, Waschabteil, Fabr. Benninger, Typ Extracta N 6, Bj. 1984, Ser.-Nr. 65837-40, Fassungsverm. 30 m, Waschabteil, Fabr. Benninger, Typ Extracta H 4, Bj. 1977, Ser.-Nr. 65837-49, Fassungsverm. 20 m, Trockeneinheit, Fabr. Deck/Womag, Bj. 1977, 26 Trockenzylinder, Ø 700 mm, Bahnkühlung, Fabr. Bumag, Bj. 1984, 2 Kühlzylinder, Bürstaggregat, Fabr. Kleinewefers, Typ Vibromat, Bj. 1984, kontinuierliche Kaulstation, Fabr. Benninger, Bj. 1977, Ser.-Nr. 58948-49, Schaltschrankanlage, Bedienteil, Operatorpanel, Fabr. Siemens, Typ Simatic Multipanel, Touchscreen, div. Zubehör
1 mercerizing system, make Benninger, built 1997, incl.: chain system, continuous infeed, make Benninger (1983), serial no. 64861-63, trough, filling capacity 480 m, washing unit, make Benninger, type Extracta N 3 (1988), serial no. 70073-75, filling capacity 15 m, washing unit, make Benninger, type Extracta N 3 (1988), serial no. 70073-75, filling capacity 15 m, wash box, make Benninger, type Bicoflex N 6-2 (1983), serial no. 64861-63, filling capacity 30 m, mercerizing unit, make Benninger, type NGA 11-S/1 ETKB (1984), serial no. 65837-40, filling capacity 33 m, mercerizing unit, make Benninger, type NGA 11-S/1 ETKB (1984), serial no. 65837-40, filling capacity 33 m, mercerizing unit, make Benninger, type NGA 11-S/1 ETKB (1984), serial no. 65837-40, filling capacity 33 m, stabilizing unit, make Benninger (1984), serial no. 65837-40, filling capacity 7,500 mm, stabilizing unit, make Benninger (1984), serial no. 65837-40, filling capacity 7,500 mm, wash box, make Benninger, type Extracta N 6 (1984), serial no. 65837-40, filling capacity 30 m, wash box, make Benninger, type Extracta N 3 (1977), serial no. 58948-49, filling capacity 15 m, impregnating unit, make Benninger, type Extracta N 3 (1977), serial no. 58948-50, filling capacity 15 m, wash box, make Benninger, type Extracta H 4 (1977), serial no. 58948-49, filling capacity 20 m, wash box, make Benninger, type Extracta H 4, 1 section w. 2 turborollers, make Goller, type Unipulsa (1999), serial no. 9579, filling capacity 20 m, wash box, make Benninger, type Extracta N 6 (1984), serial no. 65837-40, filling capacity 30 m, wash box, make Benninger, type Extracta H 4 (1977), serial no. 65837-49, filling capacity 20 m, drying unit, make Deck/Womag (1977), 26 drying cylinders, Ø 700 mm, web cooling system, make Bumag (1984), 2 cooling cylinders, brushing unit, make Kleinewefers, type Vibromat (1984), continuous fabric reeling station, make Benninger (1977), serial no. 58948-49, switchgear cabinet system, operator unit, operator panel, make Siemens, type Simatic Multipanel, touchscreen, accessories
792 1 Färbefoulard (KKV), Fabr. Eduard Küsters, Typ 222.11-1800, Bj. 1980, Ser.-Nr. 10449200-01, i. Wesentl. best. aus: Einlauf, Eigenbau, Foulard, Fabr. Küsters, Zentrumswickler, Eigenbau, Farbansatzbehälter, Dosierpumpe, Schaltschrankanlage, Steuerung, 4 Farbansatzbehälter, Doppeldosierpumpen, Fabr. Sera, Typ RTK 413 E, Warmwasserstation z. Kühlwasserrecycling, 2 Einspeisepumpen, Zubehör
1 dyeing padder (KKV), make Eduard Küsters, type 222.11-1800, built 1980, serial no. 10449200-01, incl. following main components: infeed system, self-constructed, padding machine, make Küsters, center wind, self-constructed, dye batching tank, dosing pump, switchgear cabinet system, control system, 4 dye batching tanks, double dosing pumps, make Sera, type RTK 413 E, warm water station f. cooling water recycling, 2 feed pumps, accessories
793 1 Färbe-/Trockenanlage (MM2), Fabr. Monforts, best. aus kontinuierlichem Einlauf, Fabr. Monforts, Bj. 1984, Zugwerk, Wanne, Fassungsverm. 81 m, Färbefoulard, Fabr. Küsters, Typ 222-11-1800, Bj. 1977, Ser.-Nr. 10.001.600, Vortrockner, Fabr. Monforts, Typ VTG/2 M/Gas, Bj. 1990, Ser.-Nr. 64.653, Vortrockner, Fabr. Monforts, Typ VTG/4 V/Gas, Bj. 1980, Ser.-Nr. 64822, Hotflue, Fabr. Montforts, Typ TMHH-1 S/6 T+TMH 1 S/4+1 S/4 D, Bj. 1974, Ser.-Nr. 59213/60823, gasbeheizt, Fassungsverm. 112 m, kontinuierliche Kaulstation, Fabr. Monforts, Bj. 1981, Zugwerk, Wanne, Oberflächenwickler, Fabr. Monforts, Schaltschrankanlage, Steuerung, Bedienteil, div. Zubehör
1 dyeing/drying system (MM2), make Monforts
794 1 Färbe-/Trockenanlage (MM3), Fabr. Monforts, best. aus kontinuierlichem Einlauf, Fabr. Wiese, Bj. 1989, Fassungsverm. 180 m, Zugwerk, Wanne, Schautafel, Färbefoulard, Fabr. Küsters, Typ 222-11-1800, Bj. 1989, Ser.-Nr. 106-70449-01, Feuchtemessaggregat, Fabr. Pleva, Typ AF 310, Bj. 2018 Ser.-Nr. 14093018, Luftgang, Fabr. Monforts, Ser.-Nr. 64.049, gasbeheizt, 6 Gasbrenner, Hotflue, Fabr. Monforts, Typ TMH-1 S 8 T, Bj. 1980, Ser.-Nr. 60.848, dampfbeheizt, Hotflue, Fabr. Monforts, Typ TMH-1 S-4 T, Bj. 1980, Ser.-Nr. 40.942, Fassungsverm. 90 m, dampfbeheizt, Kühlwerk, Fabr. Monforts, 2 Kühlwalzen, kontinuierliche Kaulstation, Fabr. Monforts, Typ A+E Kombi, Bj. 1989, Ser.-Nr. 64.050, Wanne, Schautafel, Wickler, Schaltschrankanlage, Steuerung, div. Zubehör
1 dyeing/drying system (MM3), make Monforts, incl. continuous infeed, make Wiese (1989), filling capacity 180 m, drawing unit, trough, inspection board, padding machine, make Küsters, type 222-11-1800 (1989), serial no. 106-70449-01, moisture measuring unit, make Pleva, type AF 310 (2018), serial no. 14093018, skying unit, make Monforts, serial no. 64.049, gas-heated, 6 gas burners, hotflue, make Monforts, type TMH-1 S 8 T (1980), serial no. 60.848, steam-heated, hotflue, make Monforts, type TMH-1 S-4 T (1980), serial no. 40.942, filling capacity 90 m, steam-heated, cooling unit, make Monforts, 2 cooling rollers, continuous fabric reeling station, make Monforts, type A+E Kombi (1989), serial no. 64.050, trough, inspection board, winding unit, switchgear cabinet system,
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
control system, accessories
795 1 Jigger, Fabr. Hendriksen, Typ VH-Super 1200, Bj. 1985, Ser.-Nr. 120.116, Steuerungsautomatik, Typ Mikrotecs Pro 4, Bj. 1988, Operatorpanel, Digitalanzeigen, Zubehör
1 jigger, make Hendriksen, type VH-Super 1200, built 1985, serial no. 120.116, automatic control system, type Mikrotecs Pro 4 (1988), operator panel, digital displays, accessories
796 1 Jigger, Fabr. Hendriksen, Typ VH-Super 1200, Bj. 1985, Ser.-Nr. 120.115, Steuerungsautomatik, Typ Mikrotecs Pro 4, Bj. 1988, Operatorpanel, Digitalanzeigen, Zubehör
1 jigger, make Hendriksen, type VH-Super 1200, built 1985, serial no. 120.115, automatic control system, type Mikrotecs Pro 4 (1988), operator panel, digital displays, accessories
797 1 V2A-Behälter, Inhalt 20 m³, 2 Pumpen, Verrohrung
1 V2A tank, capacity 20 m³, 2 pumps, piping
798 1 Strangausbreiter, Fabr. Monforts, Typ 4902, Bj. 1978, Ser.-Nr. 60393, Arbeitsbreite 2.000 mm, Kantenführung
1 rope opener, make Monforts, type 4902, built 1978, serial no. 60393, working width 2,000 mm, edge guiding system
799 1 Labor-Färbeapparat für Entwicklung, Fabr. Jasper, Bj. 1983
1 laboratory dyeing apparatus for developing, make Jasper, built 1983
800 1 Jet-Färbeanlage, Fabr. LAB-Pro, Typ FM14-0110-45, Bj. 2017, Ser.-Nr. 217039, Inhalt 5.500 l, Prüfdruck 5,5 bar
1 jet dyeing system, make LAB-Pro, type FM14-0110-45, built 2017, serial no. 217039, capacity 5,500 l, test pressure 5.5 bar
800/1 8 Transportbehälter, ca. 1.200 x 1.800 mm
8 transport container, approx. 1,200 x 1,800 mm
801 1 Färbeanlage (Pad Steam), Fabr. Küsters, Bj. 2003, best. aus Warmspeichermulde, Fabr. Küsters, Typ 882.40, 2-Walzenfoulard, Fabr. Küsters, Typ 222.557-1800, Bj. 2003, Ser.-Nr. 101-80363-02, Pflatsche, Fabr. Küsters, Typ 271.35-1800, Bj. 2003, Ser.-Nr. 101-80363-0301, Färbedämpfer, Fabr. Küsters, Typ 842-34-1800, Bj. 2003, Ser.-Nr. 10180363-0401, Quetschwerk, Fabr. Küsters, Typ 825.65-1800, Bj. 2003, Ser.-Nr. 101-80363-0801, Breitwaschmaschine, Fabr. Küsters, Typ Compacta 836.75, Breitwaschmaschine, Fabr. Küsters, Typ Compacta 836.75, Quetschwerk, Fabr. Küsters, Typ 825.65-1800, Breitwaschmaschine, Fabr. Küsters, Typ 836.75 Compacta, Absaugsystem, Fabr. 866.24, Saugwarenführung, Zyklonabscheider, Breitwaschmaschine, Fabr. Küsters, Typ 834.48 Turboflash, Quetschwerk, Fabr. Küsters, Typ 825.65, Breitwaschmaschine, Fabr. Küsters, Typ 863.75 Compacta,. Breitwaschmaschine, Fabr. Küsters, Typ 863.75 Compacta, Saugsystem, Typ 866.24, Saugwarenführung, Zyklonabscheider, Breitwaschmaschine, Fabr. Küsters, Typ 834.48
Turboflash, Quetschwerk, Fabr. Küsters, Typ 825.65, Breitwaschmaschine, Fabr. Küsters, Typ 836.73 Compacta, 2-Walzen-Hochleistungsquetschwerk, Fabr. Küsters, Typ 222.65, Trockeneinheit, Fabr. Küsters, Typ 289.60, 18 Trockenzylinder, Ø 770 mm, Warenspeichermulde, Fabr. Küsters, Typ 882.50, Schaltschrankanlage, div. Steuer-/Bedienteile, Feuchtemessgerät, Typ AF 110, Sauerstoff-Messwerterfassung, PH-Regelanlage, Hydrosulfidstation
1 dyeing system (pad steam), make Küsters, built 2003, incl. heated storage trough, make Küsters, type 882.40, 2-roll padder, make Küsters, type 222.557-1800 (2003), serial no. 101-80363-02, slop-padding machine, make Küsters, type 271.35-1800 (2003), serial no. 101-80363-0301, dyeing steamer, make Küsters, type 842-34-1800 (2003), serial no. 10180363-0401, squeezing machine, make Küsters, type 825.65-1800 (2003), serial no. 101-80363-0801, open-width washing machine, make Küsters, type Compacta 836.75, open-width washing machine, make Küsters, type Compacta 836.75, squeezing machine, make Küsters, type 825.65-1800, open-width washing machine, make Küsters, type 836.75 Compacta, extraction system, make 866.24, suction fabric guiding system, cyclone separator, open-width washing machine, make Küsters, type 834.48 Turboflash, squeezing machine, make Küsters, type 825.65, open-width washing machine, make Küsters, type 863.75 Compacta, open-width washing machine, make Küsters, type 863.75 Compacta, suction system, type 866.24, suction fabric guiding system, cyclone separator, open-width washing machine, make Küsters, type 834.48 Turboflash, squeezing machine, make Küsters, type 825.65, open-width washing machine, make Küsters, type 836.73 Compacta, 2-roller heavy duty squeezing machine, make Küsters, type 222.65, drying unit, make Küsters, type 289.60, 18 drying cylinders, Ø 770 mm, fabric storage trough, make Küsters, type 882.50, switchgear cabinet system, diff. types of control units, moisture measuring device, type AF 110, oxygen measured-value acquisition system, PH control system, hydrosulphide station
803 1 EC-Cord-Waschsstraße, Fabr. Benninger, Typ Trikoflex LT-BD, Bj. 2006, kontinuierlicher Einlauf, Fabr. Küsters, Bj. 1982, 3 geschl. Trommelwaschabteilungen, L 2x 8.000/1x 7.000 mm, Verbindungskasten, Chemiezuführung, Bürstwerk, 3 geschl. Trommelwaschabteilungen, L 2x 8.000/1x 7.000 mm, Bürstaggregat, Fabr. Kleinewefers, Typ Vibromat, Bj. 1982, Bandbürstmaschine, Fabr. Sucker-Müller, Typ BB 4-2, Bj. 1999, Bürstmaschine, Fabr. Franzmüller, Typ GRV 3, Bj. 1978, Netz-/Seifabteilung, Rollenspeicher, Fabr. Küsters, Typ 235-24-1800, Bj. 1982, Rundbürste, Fabr. Holthausen, Typ EST-78, Bj. 1979, Quetschwerk, Fabr. Küsters, Typ 225-21-1800, Bj. 1982, Nass-/Quer-/Rundbürste, Fabr. Franzmüller, Typ CDN, Bj. 1982, Quetschwerk, Foulardchassis, Fabr. Küsters, Rundbürste, Fabr. Müller, Typ ERV 3, Bj. 1982, Siebtrommel-Reinigungsaggregat, Fabr. Wandres, Typ BW 99/1/1890, Bj. 1999, 10 Trockenzylinder, Fabr. Rumag, Bj. 1982, 3 Etagen, Duplex-Spannrahmen, Fabr. Artos, dampfbeheizt, Dampflöschanlage, Fabr. Bapcock, kontinuierlicher Auslauf, Wanne, Fabr. Küsters, Kaulenwickler, Fabr. Bastian, Typ 02-
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
011, Bj. 1982, Feuchtigkeitsmesssystem, Fabr. Mahlo, Typ RMSR-6 S, Bj. 1979, Wärmetauscher, Fabr. Pozzi, Typ FCR-2 SE, Bj. 1991
1 EC cord washing line, make Benninger, type Trikoflex LT-BD, built 2006, continuous infeed, make Küsters (1982), 3 closed drum washing sections, L 2x 8,000/1x 7,000 mm, connecting box, chemical supply system, brushing unit, 3 closed drum washing sections, L 2x 8,000/1x 7,000 mm, brushing unit, make Kleinewefers, type Vibromat (1982), belt brushing machine, make Sucker-Müller, type BB 4-2 (1999), brushing machine, make Franzmüller, type GRV 3 (1978), wetting/soaping section, roller storage, make Küsters, type 235-24-1800 (1982), round brush, make Holthausen, type EST-78 (1979), squeezing machine, make Küsters, type 225-21-1800 (1982), wet/cross/round brush, make Franzmüller, type CDN (1982), squeezing machine, padding machine chassis, make Küsters, round brush, make Müller, type ERV 3 (1982), screening drum cleaning unit, make Wandres, type BW 99/1/1890 (1999), 10 drying cylinders, make Rumag (1982), 3 levels, duplex stenter frame, make Artos, steam-heated, steam extinguishing system, make Babcock, continuous discharge, trough, make Küsters, fabric roll winder, make Bastian, type 02-011 (1982), moisture measuring system, make Mahlo, type RMSR-6 S (1979), heat exchanger, make Pozzi, type FCR-2 SE (1991)
804 1 Vorbehandlung 1 A (Senge), best. aus Einlauf, Fabr. Osthoff, Bj. 1980, Wanne, Bürstaggregat, Fabr. Kleinewefers, Typ Fibromat, Bj. 1983, Stapel-Muldenspeicher, Fabr. Babcock, Typ 350, Bj. 1998, Ser.-Nr. P98025-700/260, einlaufseitig, Fassungsverm. 350 m bei 150 m/Min., Senge, Fabr. Osthoff, Typ Universal 80, Bj. 1980, Ser.-Nr. 5.956, Bürstaggregat, Fabr. Kleinewefers, Bj. 1982, Ser.-Nr. 12602220, Dämpfer, Fabr. Osthoff, Bj. 1980, Imprägnierteil, Fabr. Osthoff, Bj. 1980, Fassungsverm. 10 m, HL-Quetsche, Fabr. Osthoff, Bj. 1980, Stapelmuldenspeicher (Auslauf), Fabr. Babcock/Menzel, Typ P 98025-700/260, Bj. 1998, Fassungsverm. 350 m bei 150 m/Min., Kaulstation, Fabr. Osthoff, Bj. 1980, Dosieranlage, Fabr. Prominent, Bj. 1993, f. Chemikalien, Ser.-Nr. 92-30-239, 13 Dosierpumpen, Schalt-/Steueranlage, Bedienteil, Fabr. Wakosedo, Typ Sedomat 5000, Bahnregelanlage, Fabr. Eberhard & Leimer, Zubehör
1 pre-treatment 1 A (singeing)
804/1 1 Ultrafiltrations-Versuchsanlage, Fabr. Hescon, Ser.-Nr. 003
1 ultra filtration testing plant, make Hescon, serial no. 003
805 1 Farbdosieranlage, Fabr. Mutschink, Typ Combidus (Farblösemaschine), Bj. 1999, m. Filteranlage, Fabr. Infastaub, best. aus: ca. 30 Dosierpumpen, Dosieranlage, Digitalwaage, Verrohrung, 11 V2A-Behälter, unterschiedl. Größen, m. Rührwerk, 1 Posten V2A-Behälter, fahrbar, ca. 31 Stck.
1 dye dosing system, make Mutschink, type Combidus (Farblösemaschine), built 1999, w. filter system, make Infastaub, incl.: approx. 30 dosing pumps, dosing unit, digital scale, piping, 11 V2A tanks, diff. sizes, w. stirrer, 1 lot V2A tanks, mobile, approx. 31 units
806 1 Waschplatz, Bj. 2018, u. Treppenpodest, best. aus: stationäre HD-Reiniger, Fabr. Kärcher, Typ HDC Classic, m. Sprühlanze, Sprühkopf
1 washing station, built 2018, and stair platform, incl.: stationary HP cleaner, make Kärcher, type HDC Classic, w. spray lance, spray head
808 1 Farb-Dosieranlage Appretur, 5 Ansatzbehälter, Pumpen, Verrohrung, 4 Lagertanks, GFK, je 13.000 l
1 dye dosing - finishing, 5 batching tanks, pumps, piping, 4 storage tanks, glass fibre reinforced plastic, each 13,000 l
809 1 Warenschaumaschine, Fabr. Menschner, Typ MMS, Bj. 1990, Ser.-Nr. 114389, Arbeitsbreite 2.200 mm
1 fabric inspection machine, make Menschner, type MMS, built 1990, serial no. 114389, working width 2,200 mm
810 1 Warenschaumaschine, Fabr. Menschner, Typ MMS, Bj. 1988, Ser.-Nr. 12948F20ZZB00/385, Arbeitsbreite 2.200 mm
1 fabric inspection machine, make Menschner, type MMS, built 1988, serial no. 12948F20ZZB00/385, working width 2,200 mm
79541 Lörrach, Beim Haagensteg 4/ Produktionshalle Westbau/ Legerei Endkontrolle
811 1 Warenschaumaschine, Fabr. Menschner, Typ MMS, Bj. 1980, Ser.-Nr. 17141, Schaubereich 1.800 mm
1 fabric inspection machine, make Menschner, type MMS, built 1980, serial no. 17141, inspection area 1,800 mm
812 1 Warenschaumaschine, Fabr. Menschner, Typ MMS, Bj. 1980, Ser.-Nr. 17140, Warenschaubereich 1.800 mm
1 fabric inspection machine, make Menschner, type MMS, built 1980, serial no. 17140, fabric inspection area 1,800 mm
813 1 Warenschaumaschine, Fabr. Menschner, Typ MMS, Bj. 1980, Ser.-Nr. 17139, Warenschaubereich 1.800 mm
1 fabric inspection machine, make Menschner, type MMS, built 1980, serial no. 17139, fabric inspection area 1,800 mm
814 1 Warenschaumaschine, Fabr. Menschner, Typ MMS, Ser.-Nr. 7828F20ZZB00/385, Warenschaubereich 1.800 mm
1 fabric inspection machine, make Menschner, type MMS, serial no. 7828F20ZZB00/385, fabric inspection area 1,800 mm
815 1 Warenschaumaschine, Fabr. Menschner, Typ MMS, Bj. 1984, Ser.-Nr. 5918F20ZZB00/385, Warenschaubereich 1.800 mm
1 fabric inspection machine, make Menschner, type
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
MMS, built 1984, serial no. 5918F20ZZB00/385, fabric inspection area 1,800 mm
816 1 Warenschaumaschine, Fabr. Menschner, Typ MMS, Bj. 1982, Ser.-Nr. 17586, Warenschaubereich 1.800 mm
1 fabric inspection machine, make Menschner, type MMS, built 1982, serial no. 17586, fabric inspection area 1,800 mm
817 1 Warenschaumaschine, Fabr. Menschner, Typ MMS, Bj. 1992, Ser.-Nr. 114834, Warenschaubereich 1.800 mm
1 fabric inspection machine, make Menschner, type MMS, built 1992, serial no. 114834, fabric inspection area 1,800 mm
818 1 Verpackungsanlage, Fabr. Hagemann, Bj. 1997, best. aus: Aufgabe-Gurtförderbänder, Gurtbreite 500 mm, Hubgerüst, Elektro-Kettenzug, Folieneinschweißanlage, Schweißspiegel, Folienbreite max. 3.000 mm, Schweißspiegel, Übergabestation, Anpressung, Verschlussstation, Gurtförderbänder, Abstapelungssystem, Ballengreifer, Verfahrweg max. 16.000 mm, Teilschutzeinhausung, Lichtschrankenüberwachung
1 packaging machine, make Hagemann, built 1997, incl.: feed belt conveyors, belt width 500 mm, lifting gear, electr. chain hoist, film sealing machine, welding mirror, max. film width 3,000 mm, welding mirror, transfer station, pressing station, closing station, belt conveyors, stacking system, bale gripper, max. travel 16,000 mm, partial safety enclosure, light barrier monitoring system
818/1 3 Elektro-Kettenzüge, m. Kranschienen
3 electr. chain hoists, w. crane rails
818/2 1 Zeiger-Plattformwaage, Fabr. Toledo
1 platform scale w. pointer, make Toledo
819 1 Umrollanlage
1 re-reeling system
820 1 Posten Altmaschinen
1 Posten old machinery
821 1 Hochstoßlegemaschine, Fabr. Menschner, Bj. 1972, Ser.-Nr. 12858, Arbeitsbreite 2.000 mm
1 high pile plaiting machine, make Menschner, built 1972, serial no. 12858, working width 2,000 mm
823 1 Warenschaumaschine, Fabr. Maag, Bj. 1973, Ser.-Nr. 32010
1 fabric inspection machine, make Maag, built 1973, serial no. 32010
823/1 2 Elektro-Kettenzüge, älter
2 electr. chain hoists, older type
79541 Lörrach, Beim Haagensteg 4/ Rauchgasneutralisation
824 1 Rauchgasneutralisationsanlage, best. aus:
Flüssigkeitsringpumpe, Fabr. Sihi, Bj. 2016, Flüssigkeitsringprumpe, Fabr. Sihi, Bj. 2018, Eratz Elektro-Motor
1 flue gas neutralization system, incl.: liquid ring pump, make Sihi (2016), liquid ring pump, make Sihi (2018), spare electr. motor
79541 Lörrach, Beim Haagensteg 4/ Produktion
826 1 Posten Kaulböcke, ca. 100 Stck., 1-achsig
1 Posten stands for fabric rolls, approx. 100 units, 1 axle
826/1 1 Posten Kaulböcke, ca. 100 Stck, 1-achsig
1 Posten stands for fabric rolls, approx. 100 pcs., 1 axle
826/2 1 Posten Kaulböcke, m. 4 Rädern, ca. 125 Stck., + 20 Stck. mit Stoff bezogen, 2-achsig
1 Posten stands for fabric rolls, w. 4 wheels, approx. 125 units, + 20 units w. fabric cover, 2 axles
826/3 1 Posten Kaulböcke, ca. 125 Stck., 2-achsig
1 Posten stands for fabric rolls, approx. 125 units, 2 axles
827 1 Posten Kaulantriebe/Verweilstationen, ca. 15 Stck., Zentrumwickler
1 Posten fabric roll drives/resting stations, approx. 15 units, center winder
827/1 1 Posten Kaulantriebe, ca. 20 Stck.
1 Posten fabric roll drives, approx. 20 units
827/2 1 Posten Paletten, m. Metall-Seitengestell, ca. 900 Stck.
1 Posten pallets, w. metal side rack, approx. 900 units
827/3 1 Posten Paletten, m. Metall-Seitengestell, ca. 900 Stck.
1 Posten pallets, w. metal side rack, approx. 900 units
828 1 Posten Paletten, 1.200 x 1.200 mm, m. Metall-Seitengestell, ca. 900 Stck.
1 Posten pallets, 1,200 x 1,200 mm, w. metal side rack, approx. 900 units
828/1 1 Posten Paletten, m. Metall-Seitengestell, ca. 900 Stck.
1 Posten pallets, w. metal side rack, approx. 900 units
828/2 1 Posten Auffangwannen, ca. 8 Stck, unterschiedl. Größen
1 Posten collecting pans, approx. 8 pcs., diff. sizes
828/3 4 Nähmaschinen, Fabr. Merrow
4 sewing machines, make Merrow
828/4 4 Nähmaschinen, Fabr. Merrow
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
4 sewing machines, make Merrow
828/5 4 Nähmaschinen, Fabr. Merrow
4 sewing machines, make Merrow
828/6 4 Nähmaschinen, Fabr. Merrow
4 sewing machines, make Merrow
828/7 2 Schränke, Inhalt: Nähmaschinen, kl. Schleifmaschine, Zubehör
2 cabinets, content: sewing machines, small grinding machine, accessories
79541 Lörrach, Beim Haagensteg 4/ Wiese/ Hochregallager
829 1 Regalanlage-spätere Freigabe-Zwischenverkauf vorbehalten, Fabr. Bito, Typ PT110L, Bj. 2018, best. aus: 10 Regalreihen á 20 Felder, L je Feld 3.600 mm, 4 Regalreihen á 13 Felder, L je Feld 3.600 mm, H ca. 7.000 mm, 6 Ebenen
1 shelf system - released at a later date- subject to pre-sale, make Bito, type PT110L, built 2018, incl.: 10 shelf rows, 20 fields each, L per field approx. 3,600 mm, 4 shelf rows, 13 fields each, L per field approx. 3,600 mm, H approx. 7,000 mm, 6 levels
79541 Lörrach, Beim Haagensteg 4/ Wiese/ Produktion/ Büro Betriebsleiter
832 1 Containerverbundanlage, 4.000 x 7.000 mm, verglast
1 interconnected container system, 4,000 x 7,000 mm, glazed
839 1 Meisterkabine-spätere Freigabe, 2.000 x 3.000 mm, verglast, 1-türig
1 Meisterkabine-spätere Freigabe, 2,000 x 3,000 mm, glazed, 1 door
79541 Lörrach, Beim Haagensteg 4/ Wiese/ Produktion/ Büro Empore
845 1 Laserdrucker, Fabr. Kyocera, Typ P6021 CDN
1 laser printer, make Kyocera, type P6021 CDN
847 1 Laserdrucker, Fabr. Kyocera, Typ FS4100DN
1 laser printer, make Kyocera, type FS4100DN
79541 Lörrach, Beim Haagensteg 4/ Wiese/ Produktion/ Stapler-Reparaturwerkstatt
852 1 4-Säulen-Lkw-Hebebühne, Fabr. STENHØJ, Bj. 1988, Tragfähigkeit 7.500 kg
1 4-pillar truck lifting platform, make STENHØJ, built 1988, load capacity 7,500 kg
853 1 Säulenbohrmaschine, Fabr. Alzmetall, Typ AB4, Ser.-Nr. 138
1 pillar drilling machine, make Alzmetall, type AB4, serial no. 138
854 1 Doppelschleifbock, Fabr. Metabo, Schleifscheiben-Ø 150 mm
1 double-sided stand grinder, make Metabo, grinding wheel Ø 150 mm
855 3 Werkbänke, div. Ausführungen, 2 Palettenregale, Inhalt, Gitterauffangwanne, L 2.000 mm, Waschtisch, Abgas-/Absaugschlauch, Elektro-Kettenzug
3 workbenches, diff. types, 2 pallet shelves, content, mesh collection pan, L 2,000 mm, washing table, exhaust gas/extraction hose
79541 Lörrach, Beim Haagensteg 4/ Färberei Labor
857 1 Edelstahl-Doppelwaschbecken, L 1.200 mm, Edelstahl-Arbeitstisch, L 1.500 mm
1 stainless steel double sink, L 1,200 mm, stainless steel work table, L 1,500 mm
858 1 Digitalwaage, Fabr. Mettler, Typ PJ4000
1 digital scale, make Mettler, type PJ4000
859 1 PAD-Steam-Laboranlage, Fabr. Mathis, Typ PSA18397
1 laboratory pad steam unit, make Mathis, type PSA18397
860 1 Nähmaschine, Fabr. Merrow
1 sewing machine, make Merrow
861 1 Japan-Dämpfer, Fabr. Mathis
1 Japanese steaming machine, make Mathis
862 1 Nähmaschine
1 sewing machine
863 1 Labor-Thermosoltrockner, Fabr. Mathis, Typ LTF107586
1 laboratory thermosol dryer, make Mathis, type LTF107586
864 1 Labortrockner, Fabr. Mathis
1 laboratory dryer, make Mathis
865 1 Labortrockner, Fabr. DAE Lim, Typ DL-2015, Bj. ca. 2013, 250°C, Ser.-Nr. 130220
1 laboratory dryer, make DAE Lim, type DL-2015, built ca. 2013, 250°C, serial no. 130220
866 1 Labor-Jet-Färbeapparat, Fabr. Mathis, Typ BFA-12, Bj. 2018, Ser.-Nr. 237618, Labormast
1 laboratory jet dyeing apparatus, make Mathis, type BFA-12, built 2018, serial no. 237618,
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
laboratory mast
867 1 Trockenschrank, ca. 500 x 500 x 800 mm
1 drying cabinet, approx. 500 x 500 x 800 mm
869 1 Arbeitszeile, Edelstahl, Unterbau, L 5.000 mm, integr. Doppelwaschbecken
1 work desk system, stainless steel, base unit, L 5,000 mm, integr. double sink
870 1 Arbeitstisch, m. aufgesetzter Edelstahlplatte, Unterbau, 500 x 3.000 mm
1 work table, w. stainless steel top plate, base unit, 500 x 3,000 mm
871 3 Arbeitstische, m. aufgesetzter Edelstahlplatte,Unterbau, 800 x 2.000 mm
3 work tables, w. stainless steel top plate, base unit, 800 x 2,000 mm
872 1 Labor-Cordfärbemaschine, Fabr. Mathis
1 laboratory cord dyeing machine, make Mathis
873 1 Labor-Färbefoulard, Ser.-Nr. HVF59501
1 laboratory dyeing padder, serial no. HVF59501
874 1 Labor-Färbefoulard KKV, Fabr. Mathis, Ser.-Nr. HVF14886
1 laboratory dyeing padder KKV, make Mathis, serial no. HVF14886
875 1 Arbeitstisch, aufgesetzte Edelstahlplatte, L 6.000 mm
1 work table, stainless steel top plate, L 6,000 mm
876 1 pH-Messgerät, Fabr. Mathis, Typ Morapex-A, Ser.-Nr. MOR995
1 pH measuring device, make Mathis, type Morapex-A, serial no. MOR995
877 2 Magnetrührgeräte, Fabr. Velp, Typ AGE
2 magnetic stirrers, make Velp, type AGE
880 2 Elektro-Stabrührgeräte, Fabr. Ika, Typ Eurostar 20 bzw. RW16
2 electr. stirring rods, make Ika, type Eurostar 20 bzw. RW16
881 1 Laborwaage, Fabr. Mettler, Typ PM300
1 laboratory scale, make Mettler, type PM300
882 1 Laborkondensierer, Fabr. Mathis, Ser.-Nr. LTF-37174
1 laboratory condenser, make Mathis, serial no. LTF-37174
883 1 Labortrockner, Fabr. Mathis
1 laboratory dryer, make Mathis
884 1 Labor-Appretur-Foulard, Fabr. Mathis, Ser.-Nr. HVF14786
1 laboratory finishing padding machine, make Mathis, serial no. HVF14786
887 2 Arbeitstische, Edelstahlplatte, 1.000 x 1.600 mm, Holzregalaufsatz, Stahlblechregal
2 work tables, stainless steel plate, 1,000 x 1,600 mm, wooden shelf attachment, steel shelf
891 1 Edelstahl-Doppelwaschbecken, L 1.200 mm
1 stainless steel double sink, L 1,200 mm
892 2 Edelstahlbehälter für Seifenlauge, Ø 400/600 mm, dampfbeheizt
2 stainless steel tanks for soap sud, Ø 400/600 mm, steam-heated
893 1 Digitalwaage, Fabr. Mettler Toledo, Typ Labstyle 3002, max. 3.100 g, Teilung 0,01 g
1 digital scale, make Mettler Toledo, type Labstyle 3002, max. 3,100 g, division 0.01 g
895 1 Laborwaage, Fabr. Mettler Toledo, Typ MS 204 S, Wägebereich max. 220 g, Teilung 0,1 mg
1 laboratory scale, make Mettler Toledo, type MS 204 S, max. weighing range 220 g, division 0.1 mg
896 1 Laborwaage, Fabr. Mettler, Typ AE 200
1 laboratory scale, make Mettler, type AE 200
897 1 Digitalwaage, Fabr. Sartorius
1 digital scale, make Sartorius
899 1 Schüttelbad, Fabr. GFL, Typ 1083
1 shaking bath, make GFL, type 1083
79541 Lörrach, Beim Haagensteg 4/ techn. Labor/ Klimakammer
908 1 mechanisches Dehnungsmessgerät, Fabr. Fryma, Typ Dual Extentionmeter
1 mechanical strain gauge, make Fryma, type Dual Extentionmeter
909 1 Abrieb-Testgerät, Fabr. James H. Heal & Co., Typ Martin Dale Abrasion & Pilling Tester, Bj. ca. 2009
1 abrasion testing device, make James H. Heal & Co., type Martin Dale Abrasion & Pilling Tester, built ca. 2009
910 2 Dehnungsprüfer, Fabr. Henerlein
2 extensometers, make Henerlein
911 1 Nass-/Trockensauger, Fabr. Kärcher, Typ IVC 60/24-2 aP
1 wet/dry vacuum cleaner, make Kärcher, type IVC 60/24-2 aP
911/1 1 Industriesauger, Fabr. Kärcher, Typ NT602 Eco
1 industrial vacuum cleaner, make Kärcher, type NT602 Eco
911/2 1 Hochdruckreiniger, Fabr. Kärcher, Typ HDS 955
1 high-pressure cleaner, make Kärcher, type HDS 955
911/3 1 Hochdruckreiniger, Fabr. Kärcher, Typ HDS 1295
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
1 high-pressure cleaner, make Kärcher, type HDS 1295
912 1 Abriebtestgerät, Fabr. James H. Heal & Co., Typ Martin Dale Abrasion & Pilling Tester, Bj. ca. 2009
1 abrasion testing device, make James H. Heal & Co., type Martin Dale Abrasion & Pilling Tester, built ca. 2009
913 1 Elmendorf-Pendelschlag-Prüfgerät, Fabr. Textest, Typ FX 3750
1 Elmendorf pendulum impact testing device, make Textest, type FX 3750
914 1 Digitalwaage, Fabr. Sartorius
1 digital scale, make Sartorius
915 1 Stereomikroskop, Fabr. Eschenbach
1 stereo microscope, make Eschenbach
916 1 Abriebtestgerät, Fabr. James H. Heal & Co., Typ Martin Dale Abrasion & Pilling Tester, Ser.-Nr. 403/94/1174
1 abrasion testing device, make James H. Heal & Co., type Martin Dale Abrasion & Pilling Tester, serial no. 403/94/1174
917 1 Laborcontainer, Sandwichbauweise, 2.000 x 6.000 mm, Vorraum, 2-türig
1 laboratory container, sandwich design, 2,000 x 6,000 mm, anteroom, 2 doors
918 1 Farbabmusterungskabine
1 colour matching cabin
919 1 Nähmaschine, Fabr. Juki, Typ MO-2416
1 sewing machine, make Juki, type MO-2416
920 1 Nähmaschine, Fabr. Juki, Typ MO-2416 N
1 sewing machine, make Juki, type MO-2416 N
921 1 Nähmaschine, Fabr. Adler
1 sewing machine, make Adler
922 1 beheizte Bügelpresse, Fabr. Hoffmann
1 heated ironing press, make Hoffmann
924 1 Gewerbewaschmaschine, Fabr. Miele, Typ Novotronic W 527
1 commercial washing machine, make Miele, type Novotronic W 527
925 1 Gewerbewaschmaschine, Fabr. Miele, Typ Professional PW 6055 Plus
1 commercial washing machine, make Miele, type Professional PW 6055 Plus
926 1 Gewerbewaschmaschine, Fabr. Elektrolux, Typ W475H
1 commercial washing machine, make Elektrolux, type W475H
927 1 Gewerbewaschmaschine, Fabr. Elektrolux, Typ Wascator Fom 71 CL, Bj. 2008
1 commercial washing machine, make Elektrolux,
type Wascator Fom 71 CL, built 2008
928 1 Gewerbe-Trockner, Fabr. Miele, Typ T6250
1 commercial laundry dryer, make Miele, type T6250
929 1 Laborfärbgerät, Fabr. Mattis, Typ Polycolor, Ser.-Nr. P5203
1 laboratory dyeing machine, make Mattis, type Polycolor, serial no. P5203
930 1 Beregnungsgerät
1 sprinkling device
933 1 Wasserdicht-/Wassersäulentestgerät
1 watertightness/water column testing device
934 1 Lichtechtheits-Testgerät, Fabr. Atlas Xenotest, Ser.-Nr. 27000165
1 light-fastness testing device, make Atlas Xenotest, serial no. 27000165
935 1 Stereomikroskop, Fabr. Krüss, Typ MSZ5600, Ser.-Nr. 10587
1 stereo microscope, make Krüss, type MSZ5600, serial no. 10587
937 1 elektrisches Stoffstanzgerät, Fabr. Sand Hydraulik
1 electr. fabric punching device, make Sand Hydraulik
938 1 Zerreißprüfmaschine, Fabr. Zwick, Typ Retoline, Bj. 2016, Monitor, Fabr. Samsung, Tastatur
1 tensile strength testing machine, make Zwick, type Retoline, built 2016, monitor, make Samsung, keyboard
939 1 Laborabzug, Fabr. Waldner, 1.800 x 2.700 mm, Wasserbad, Fabr. Nattermann, Typ 3004
1 laboratory extraction unit, make Waldner, 1,800 x 2,700 mm, water bath, make Nattermann, type 3004
940 1 Labor-Digitalwaage, Fabr. Sartorius, Wägebereich max. 202 g, Teilung 0,1 mg, m. Tisch
1 laboratory digital scale, make Sartorius, max. weighing range 202 g, division 0.1 mg, w. table
941 1 Dosiergerät, Fabr. Metrohm, Typ 665 Dosimat, Magnetrührgerät
1 dosing unit, make Metrohm, type 665 Dosimat, magnetic stirrer
942 1 pH-Messgerät, Fabr. Metrohm, Typ 632 PH-Meter
1 pH measuring device, make Metrohm, type 632 PH-Meter
943 1 Elektro-Stabrührgerät, Fabr. Janke, Typ Ultra Torax
1 electr. stirring rod, make Janke, type Ultra Torax
944 1 Fotometer, Fabr. Dr. Lange, Typ DR3900, Bj. 2016
1 photometer, make Dr. Lange, type DR3900, built 2016
945 1 Thermostat, Fabr. Dr. Lange, Typ LT 200
1 thermostat, make Dr. Lange, type LT 200
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
946 1 Magnet-Rührgerät, Fabr. Janke, Typ KMO 2
1 magnetic stirrer, make Janke, type KMO 2
947 1 Magnet-Rührgerät, Fabr. Janke, Typ KMO 2
1 magnetic stirrer, make Janke, type KMO 2
948 1 Digitalwaage, Fabr. Sartorius, Typ 1216
1 digital scale, make Sartorius, type 1216
949 1 Magnetrührgerät, Fabr. IKA, Typ RCT Basic, Thermostat
1 magnetic stirrer, make IKA, type RCT Basic, thermostat
950 1 pH-Messgerät, Fabr. Mattis, Typ Morapex-A, Ser.-Nr. 15298
1 pH-Messgerät, make Mattis, type Morapex-A, Ser.-Nr. 15298
951 1 Dosimeter, Fabr. Metrohm, Typ 716 DMS Titrino, Magnetrührgerät, Typ 703TI Stand
1 dosimeter, make Metrohm, type 716 DMS Titrino, magnetic stirrer, type 703TI Stand
952 1 Magnetrührgerät, Fabr. Janke, Typ KMO 2
1 magnetic stirrer, make Janke, type KMO 2
953 1 pH-Meter, Fabr. Metrohm, Typ 691 pH-Meter
1 pH meter, make Metrohm, type 691 pH-Meter
954 1 Brutschrank, Fabr. Heraeus, Typ B 6030, Nenntemperatur 70°C
1 incubator, make Heraeus, type B 6030, rated temperature 70°C
955 1 Trockenschrank, Fabr. Memmert, Typ JL 40, 2.000 W, Nenntemperatur 220°C
1 drying cabinet, make Memmert, type JL 40, 2,000 W, rated temperature 220°C
956 1 Trockenschrank, Fabr. Memmert, Typ ULM 400, Nenntemperatur 220°C
1 drying cabinet, make Memmert, type ULM 400, rated temperature 220°C
957 3 Labortische, m. Unterbau, L 2.000 mm, Labor-Waschtisch
3 laboratory benches, w. base unit, L 2,000 mm, laboratory washing table
958 2 Arbeitstische, Holz, L 4.000 mm, 3 Drehstühle, 2 Rollcontainer, Sideboard, Aktenregal, Schrank
2 work tables, wood, L 4,000 mm, 3 swivel chairs, 2 mobile office cabinets, sideboard, file shelf, cabinet
959 1 Laserdrucker, Fabr. Kyocera, Typ P 6021 CDN
1 laser printer, make Kyocera, type P 6021 CDN
79541 Lörrach, Beim Haagensteg 4/ techn. Labor/ Pausenraum
966 1 Fixotest, Fabr. Heraeus
1 fixotester, make Heraeus
79541 Lörrach, Beim Haagensteg 4/ Waschraum/ Legerei
968 1 Gewebeabriebgerät, Fabr. Atlas, Typ Fabric Streak Analyzer
1 fabric abrasion device, make Atlas, type Fabric Streak Analyzer
969 1 Kompakt-Finisher, Fabr. Kannengiesser, Bj. ca. 1995, Beladungskapazität 12 - 13 Kittel, dampfbeheizt
1 compact finisher, make Kannengiesser, built ca. 1995, load capacity 12 - 13 smocks/lab coats, steam-heated
970 1 Gewerbewaschmaschine, Fabr. Miele, Typ Professional PW 6241 D, Bj. 2014, Ser.-Nr. 99995792
1 commercial washing machine, make Miele, type Professional PW 6241 D, built 2014, serial no. 99995792
971 1 Gewerbe-Trockner, Fabr. Miele, Typ PT8507D, Bj. 2018, Ser.-Nr. 091562954
1 commercial dryer, make Miele, type PT8507D, built 2018, serial no. 091562954
972 1 Gewerbe-Waschmaschine, Fabr. Miele, Typ PW 6107 EL, Bj. 2015
1 commercial washing machine, make Miele, type PW 6107 EL, built 2015
79541 Lörrach, Beim Haagensteg 4/ Färberei Labor
986 1 Farbmessgerät, Fabr. Datacolor, Typ 650
1 colorimeter, make Datacolor, type 650
79541 Lörrach, Beim Haagensteg 4/ Abmusterungsraum/ Büro
993 1 Abmusterungskabine, Fabr. VeriVide
1 colour matching cabin, make VeriVide
994 1 Abmusterungskabine, Fabr. VeriVide
1 colour matching cabin, make VeriVide
995 1 Farbmessgerät, Fabr. Datacolor, Typ SF 600 Plus CT, PC, Fabr. Lenovo, 15"-Monitor, Tastatur, Maus
1 colorimeter, make Datacolor, type SF 600 Plus CT, PC, make Lenovo, 15" monitor, keyboard, mouse
996 1 Laserdrucker, Fabr. Kyocera, Typ EcoSys P 2135dn
1 laser printer, make Kyocera, type EcoSys P
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016
NetBid AG / Angermann Machinery & Equipment GmbH & Co. KG - Tel.: 040 / 355 059 - 190
OP Lauffenmühle Lauchringen [11098]
2135dn
79541 Lörrach, Beim Haagensteg 4/ 1. OG/ Musterzimmer
1029 1 Farb-Stoff-Druckmaschine, Fabr. Mimaki, Typ TX500-1800 DS, Bj. 2012, Ser.-Nr. 3080219
1 fabric colour printing machine, make Mimaki, type TX500-1800 DS, built 2012, serial no. 3080219
1030 1 Schneidetisch, 2.000 x 4.000 mm, m. Elektro-Schneideschere, Fabr. Polytex, Bj. 1986
1 cutting table, 2,000 x 4,000 mm, w. electr. cutting shears, make Polytex (1986)
1031 1 Musterlaschen-heftmaschine, Fabr. Polytex
1 sample strap stitching machine, make Polytex
1032 1 Schneide-Stanzmaschine, Fabr. Polytex, Typ ZP, m. Tisch
1 cutting and punching machine, make Polytex, type ZP, w. table
1033 1 Staubsauger, Fabr. Compact
1 vacuum cleaner, make Compact
1038 1 Laserdrucker, Fabr. Kyocera, Typ P5021 cdn
1 laser printer, make Kyocera, type P5021 cdn
1040 1 Laschendrucker, Fabr. Drexel, Typ CIP2000XT, Ser.-nr. 10305
1 strap printer, make Drexel, type CIP2000XT, serial no. 10305
79541 Lörrach, Beim Haagensteg 4/ Gabelstapler
1042 1 Elektro-Gabelstapler- spätere Freigabe (15), Fabr. Linde, Typ E18C, Bj. 2003, Fahrzeug-Ident.-Nr. H2X335P00823, Tragfähigkeit 1.800 kg
1 electr. forklift truck - released at a later date (15), make Linde, type E18C, built 2003, veh. ident. no. H2X335P00823, load capacity 1,800 kg
1042/1 1 Scheren-Hubarbeitsbühne-spätere Freigabe, Fabr. JLG, Typ 2360 ES
1 scissor work platform - released at a later date, make JLG, type 2360 ES
1042/2 1 Wäschetrockner, Fabr. Miele, Typ T7944, Waschmaschine, Fabr. Miele, Typ W 5905
1 laundry dryer, make Miele, type T7944, washing machine, make Miele, type W 5905
1042/3 1 Gewerbetrockner, Fabr. Miele, Typ Professional
1 commercial dryer, make Miele, type Professional
79541 Lörrach, Beim Haagensteg 4/
Freigelände/ Schuppen
1066 1 Posten Ersatzteile, f. Färbemaschinen, Walzen, Elektrokabel u.a.m.
1 Posten spare parts, f. dyeing machines, rollers, electric cables a.m.o.
79541 Lörrach, Beim Haagensteg 4/ Gabelstapler
1069 1 Elektro-Gabelstapler-spätere Freigabe (60), Fabr. Linde, Typ E18C-02, Bj. 2004, Ser.-Nr. H2X335R01666, 1.800 kg Tragkraft
1 electr. forklift truck - released at a later date (60), make Linde, type E18C-02, built 2004, serial no. H2X335R01666, capacity 1,800 kg
Alle Angaben ohne Gewähr! Etwaige Änderungen vorbehalten! Bitte beachten Sie unsere AGB, Stand 10.01.2016All information without guarantee! Any changes reserved! Please read our Terms and Conditions, Status: 10th of January 2016