Olympic Flat Bench With Dumbbell Storage and Weight Set

Project: Olympic flat bench with dumbbell storage and weight set Page 1 of 48

Olympic flat bench

with dumbbell storage and weight set

NOTE: The measurements within this text and 2D documentation are given both in millimeters and inches (in brackets). This website is based on ISO measurement unit system, which is the international standard. I apologize to the people who use other measurement units; but I believe that measurements given in millimeters and inches should be adequate for everyone who would like to build this project. Besides that, on today’s Internet it is easy to purchase the ruler containing all the measurement units and overcome the difficulties of any kind. Use various tools and clamps in process of welding, so you could weld the items together with accuracy.

Project from www.craftsmanspace.com

Subassembly List

1. Flat Bench Subassembly – Parts List and 2D Documentation

Frame Components

Standard Parts

2. Weight Set Subassembly – Parts List and 2D Documentation

3. Dumbbell Storage Subassembly – Parts List and 2D Documentation

Frame Components

Standard Parts

Assemblage Instruction 1. Flat Bench Subassembly

1. Weld the Cover 50x50mm (items 11) to the Square Tubing 50x50x4 Cut Lenght 400mm (item 7).

2. Weld the Cover 50x50mm (items 11) to the Square Tubing 50x50x4 Cut Lenght 200mm (item 8).

Make the two of these subassemblies

3. Weld the Square Tubing 50x50x4 Cut Lenght 1100mm (item 5) to the subassembly from the previous picture.

Weld the Dumbbell Holder (item 10) on the other end of Square Tubing 50x50x4 Cut Lenght 1100mm (item 5).

Make the two of these subassemblies

4. Weld the Square Tubing 50x50x4 Cut Lenght 950mm (items 4) between two subassemblies made in the previous step.

5. Weld the Square Tubing 50x50x4 Cut Lenght 390,36mm (item 3) to the assembly made in step 1.

6. Weld the Square Tubing 50x50x4 Cut Lenght 190,42mm (item 2) to the assembly from the previous

picture. Chamfer the items edges on places where the items are joining together by welding.

7. Weld the Square Tubing 50x50x4 Cut Lenght 1285,36mm (item 1) to the assembly from the previous picture. Chamfer the items edges on places where the items are joining together by welding.

8. Weld the subassembly made in step 4 to the subassembly made in the previous step.

9. Weld the Square Tubing 50x50x4 Cut Lenght 1370,00mm (item 6) to the subassembly from the previous picture.

10. Weld the Sheet Support (item 12) and Triangle Support (item 13) together.

Made six of these subassemblies 11. Weld these six subassemblies to the subassembly made in step 9.

12. Fasten the Sheet (item 9) to the subassembly made in the previous step using standard parts: Slotted Pan Head Screw M6x35mm (item 14), Spring Lock Washe A-6 (item 15) and Hexagon Nut M6 (item 16).

2. Weight Set Subassembly 1. Weld the Delimiter (item 2) to the Round Tubing D31,8x6,3mm (item 1).

2. Line up the dumbbells at the both ends of subassembly made in the previous step.

3. Fix the dumbbells using Dumbbell Nut (items 5).

3. Dumbbell Storage Subassembly 1. Weld the Cover 50x50mm (item 6) to the Square Tubing 50x50x4 Cut, Lenght 250mm (item 3).

2. Weld the Square Tubing 50x50x4 Cut, Lenght 748,7mm (item 2) onto the subassembly from the previous picture, and chamfer the edges on places where these items needs to be weld.

3. Weld the Square Tubing 50x50x4 Cut, Lenght 146mm (item 1) onto the subassembly from the previous

picture, and chamfer the edges on places where these items needs to be weld.

4. Weld the Square Tubing 50x50x4 Cut, Lenght 293,95mm (item 4) onto the assembly from the previous picture.

5. Weld the Attachment (items 8) to the subassembly made in the previous step.

6. Weld the Cover D25,4mm (items 7) to the Round Tubing D25,4x3,2mm Cut, Lenght 300,00mm (item 5).

Make the three of these subassemblies. 7. Weld the subassemblies made in the previous step onto the subassembly made in step 5.

8. Make the two of these subassemlies

9. Fasten the subassemlies made in th previous step onto the FLAT BENCH assembly using standard parts: Spring Lock Washer A-8 (item 9), Hexagon Nut M8 (item 10) and Hexagon Bolt M8x70mm (item 11).

Olympic Flat Bench With Dumbbell Storage and Weight Set

Documents

Transcript of Olympic Flat Bench With Dumbbell Storage and Weight Set

POWERHOUSE OLYMPIC BENCH Parts List PHC 1955 · Parts List Warranty Ordering Parts Model PHC-1955 Retain This Manual for Reference 06-28-03 OWNER'S MANUAL POWERHOUSE OLYMPIC BENCH

· 2019-05-14 · Dumbbell Reverse Wrist Curl 3 12-15 PHASE 1: WEEK 2 WORKOUT 1: CHEST, TRICEPS, ABS (MULTI-JOINT) EXERCISE SETS REPS Bench Press6-8 4 Incline Dumbbell Press 3 6-8

Distributed By - The Eye · • Flat bench dumbbell fly • Incline bench press • Incline dumbbell press • Parallel bar dips • Decline dumbbell bench press • Incline dumbbell

DUMBBELL BENCH PRESS Click Image To Enlarge.

Olympic Flat Bench With Weight Set

TUFFSTUFF FITNESS INTERNATIONAL EVOLUTION · 18 CDR-300 2-Tier Tray Dumbbell/Kettle Bell Rack & CDR-300E Third Tier ... bench press. CDM-400 Deluxe Flat/Incline Bench 4 ... narrow,

'+domain name+'3.imimg.com/data3/TW/VB/MY-2436819/deepdamanfitnessequipme… · wv dumbbell rubber dumbbell neoprin dumbbell hex dumbbells wv round dumbbell steel dumbbell pvc coated

PLATE LOADED & FREE WEIGHTS Serious about fitness. · ScOTT cuRL OLymPIc IncLInE PRESS OLymPIc DEcLInE PRESS OLymPIc bEncH PRESS 45° bAck ExTEnSIOn Free Weights Free Weights . 8

Body Re-Engineering 3.0 Advanced Routine Year 2 Re...Wide Grip Pull-Up/Pull-down to Front Or Two Arm Dumbbell Rows Palms Facing Back 2 15-20 1 minute #2 Dumbbell Bench Press or Chest

DELUXE OLYMPIC BENCH - Marcy Pro

Dumbbell Workouts

THE SPECIAL EXERCISE SWIPE FILE - Conjugate Fitness · –Louie Simmons. ... push-ups, dips, dumbbell bench presses, and barbell bench presses. 3. Triceps: ... The Special Exercise

Tableof&Contents&usguncontrol.org/ExercisePlan.pdf · 1. Set up for the one arm dumbbell row by grabbing a flat bench and sitting a dumbbell on the left hand side at one end. 2. Position

THE ULTIMATE MASS...1 INCLINE BARBELL BENCH PRESS 2 FLAT BARBELL BENCH PRESS 3 SUPERSET: DUMBBELL FLYES W/CABLE CROSSOVERS EXERCISE 1 LEG RAISES REP RANGES 5 Sets of 25 Reps EXERCISE

The Strength Shop - HOME - BWT...plyometrics, kettlebell training, Olympic weightlifting, medicine ball and dumbbell training, power-lifting, gymnastics, rowing, running and jumping

Strength Training for the Runner - Furman University · 3. Dumbbell bench press for pectoralis & triceps 4. 1 arm, 1 leg dumbbell rowfor latissimus dorsi/trapezius 5. Dumbbell squat

Circuit Training - Muscles · Narrow-Grip Bench Press 2b. Overhead Triceps Extension 2c. Narrow-Grip Bench Press DAYTWO la. Pull-Up 1b. Narrow-Grip Pulldown ... Holding a dumbbell

Chad Waterburychadwaterbury.com/publication/PDF/MF_April2008.pdfSet an adjustable bench to a 30- to 45-degree incline, grab a dumbbell in each hand, and lie back on the bench, holding

Olympic Flat Bench With Dumbbell Storage_weight Set and Leg Weight

CHS Weight Training Terminology...Close Grip Bench Incline Press Dumbbell Incline Press Bench Flys Decline Press Dips . Q ~LI . ... Dumbbell Curl . TRICEP: Tri cep Push Down Tricep