Post on 11-Apr-2017
NORTON BEVELSYSTEMS
A REVOLUTION IN BEVELLING AND ROUNDING
02
NORTON BEVELSYSTEMSNew Norton NorBevel-6 and NorBevel-12 machines are a revolution in bevelling and rounding metal!
Norton now offers two new machine ranges, compact and ergonomic, electric and the pneumatic to make bevelling and rounding metal easier, faster, more accurate and more cost effective. The NorBevel concept has been designed for heavy-duty bevelling and radius work, bevelling up to a depth of 12 mm.
BETTER WORKING CONDITIONSLightweight and almost vibration-free. The chips are large enough to immediately drop to the ground. No hazardous dust particles and/or combustion gases are released.
A MORE CONSISTENT AND ACCURATE ANGLENorBevel-6 and NorBevel-12 machines provide a more consistent and accurate angle to the metal for a stronger welded joint.
A MACHINE QUALITY FINISH WITHOUT CONTAMINATIONA better quality weld joint is created through reduced encapsulation of impurities in the weld, as NorBevel does not contaminate the metal.
SPEED AND FLEXIBILITYApproximately 1.2m of bevelling can be done in one minute. In a matter of seconds the machine can be adjusted and the bevel heads replaced.
NO FINISHING AND NO DISCOLORATIONA perfect end result straight away, without finishing. Discoloration is prevented through reduced-sparking that adds hardly any heat to the material.
UNIFORM QUALITYA larger bonding surface is created for paint and coatings due to the uniform radius. Cable feed glands are no longer required to prevent chafing when feeding through cables, wiring and/or piping.
A QUALITY FINISHOnly with NorBevel you can quickly achieve high levels of constant quality when rounding metal.
SPEED AND FLEXIBILITYRounding small openings from a diameter of 18 mm is easy due to the compact and lightweight machine design. Rounding metal now has an unprecedented degree of flexibility.
FOR BEVELLING, NORBEVEL PROVIDES:
FOR ROUNDING, NORBEVEL PROVIDES:
03
THE NORTON NORBEVEL-12 RANGEThe NorBevel 12 models have been designed for heavy duty bevelling and radius work, bevelling up to a depth of 12 mm. Both the EBA-12 and ABA-12 models have powerful motors, adjustable heads for adapting bevelling depth, and come in a convenient travel case with adaptor. The electric version, EBA-12 has a variable speed switch for greater control.
NORBEVEL EBA-12 ELECTRIC NORBEVEL-12 ELECTRIC (EBA-12)
Part no. 66261107700
Motor Electric
Max. bevel depth 12 mm
Bevel radius R2, R3, R4, R5, R6, R8
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure -
Air consumption -
Power 1.53kw
Voltage 230 V / 120 V
Speed 10.500 rpm
Weight 4,5 kg
Min. pipe/opening diameter 41 mm
NORBEVEL ABA-12 PNEUMATIC NORBEVEL-12 PNEUMATIC (ABA-12)
Part no. 66261107706
Motor Pneumatic
Max. bevel depth 12 mm
Bevel radius R2, R3, R4, R5, R6, R8
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure 6 bar
Air consumption 1100 ltr / min
Power 2 PK / 1,48kw
Voltage -
Speed 10.000 rpm
Weight 5,66 kg
Min. pipe/opening diameter 41 mm
Bevel head with depth adjustment
Variable speed setting Supplied in a convenient case
Bevel head with depth adjustment
Safety lever Supplied in a convenient case
04
Premium heads for Plasma / Laser-cut steel and Stainless steel
Part Number Radius Max depth Pk qty66261136479 R2
8mm
166261136480 R3 166261146202 R4 166261152485* R5 166261152487* R6 166261152489* R8 1
Part Number Angle Max depth Pk qty66261146203 15°
8mm
166261146204* 22,5° 166261146205 30° 166261146206* 37,5° 166261136503 45° 166261146207* 52,5° 166261146209* 60° 1
Part Number Angle Max depth Pk qty
66261146210 15°
12mm
166261146211* 22,5° 166261146212 30° 166261146215* 37,5° 166261146216 45° 166261146219* 52,5° 166261146220* 60° 1
Steel
Part Number Radius Max depth Pk qty66261107707 R2
8mm1
66261107799 R3 166261107801 R4 1
Part Number Angle Max depth Pk qty66261107802 15°
8mm
166261107804* 22,5° 166261107805 30° 166261107806* 37,5° 166261107809 45° 166261146142* 52,5° 166261107811* 60° 1
Part Number Radius Max depth Pk qty
66261107812 15°
12mm
166261107840* 22,5° 166261107841 30° 166261107843* 37,5° 166261107844 45° 166261146144* 52,5° 166261107845* 60° 1
HEADS FOR NORBEVEL-12 (ELECTRIC AND PNEUMATIC)
* MTO item
* MTO item
Aluminium, plastic, brass and all soft metals
Part Number Radius Max depth Pk qty66261113318 R2
8mm
166261113319 R3 166261113320 R4 166261152479 R5 166261152482 R6 166261152484 R8 1
Part Number Angle Max depth Pk qty66261146151* 15°
8mm
166261146162* 22,5° 166261113321 30° 166261146164* 37,5° 166261113323 45° 166261146165* 52,5° 166261146166* 60° 1
Part Number Radius Max depth Pk qty
66261146167* 15°
12mm
166261146168* 22,5° 166261146169 30° 166261146170* 37,5° 166261146171 45° 166261146172* 52,5° 166261146173* 60° 1
* MTO item
Recommended maximum cut depth is 4mm per pass.
Replace the cutting head in seconds!
05
THE NORTON NORBEVEL-6 RANGEFor lighter bevelling and rounding to a depth of 6 mm, the NorBevel-6 machines are compact, maneuverable, and available in two super light weight models, with electric and pneumatic motors. The Premium version can be used for more precise depth adjustment of 0.1 mm. Spindle lock for a lighter and quicker change of NorBevel heads, only one allen key is required.
NORBEVEL EBI-6 ELECTRIC PREMIUM
NORBEVEL-6 ELECTRIC (EBI-06) Premium
Part no. 66261126777
Motor Electric
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure -
Air consumption -
Power 500 W
Voltage 230 V / 120 V
Speed 11.000 rpm
Weight 2,0 kg
Min. pipe/opening diameter 22 mm
NORBEVEL EBI-6 ELECTRIC NORBEVEL-6 ELECTRIC (EBI-06)
Part no. 66261107846
Motor Electric
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure -
Air consumption -
Power 500 W
Voltage 230 V / 120 V
Speed 11.000 rpm
Weight 1,6 kg
Min. pipe/opening diameter 22 mm
Variable speed settings
Supplied in a convenient case
Easy to adjust cutting depth
Variable speed settings
Supplied in a convenient case
Easy to use
BEST
GOOD
06
NORBEVEL ABIS-6 PNEUMATIC PREMIUM
NORBEVEL-6 PNEUMATIC (ABIS-06) Premium
Part no. 66261129888
Motor Pneumatic
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure 6 bar
Air consumption 310 ltr / min
Power 8 PK / 0.38 kw
Voltage -
Speed 25.000 rpm
Weight 1,1 kg
Min. pipe/opening diameter 22 mm
NORBEVEL EBI-6 PNEUMATIC NORBEVEL-6 PNEUMATIC (ABIS-06)
Part no. 66261107847
Motor Pneumatic
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure 6 bar
Air consumption 310 ltr / min
Power 8 PK / 0.38 kw
Voltage -
Speed 25.000 rpm
Weight 0.8 kg
Min. pipe/opening diameter 22 mm
Safety lever Supplied in a convenient case
Easy to adjust cutting depth and replace cutting head
Safety lever Supplied in a convenient case
Easy to use
BEST
GOOD
07
HEADS FOR NORBEVEL-6Premium heads for Plasma / Laser-cut steel and Stainless steel
Part Number Radius Max depth Pk qty66261136486 R2
6mm1
66261136502 R3 166261146174 R4 1
Part Number Angle Max depth Pk qty66261146175 15°
6mm
166261146178* 22,5° 166261146179 30° 166261146180* 37,5° 166261136504 45° 166261146181* 52,5° 166261146182* 60° 1
Steel
Part Number Radius Max depth Pk qty66261107851 R2
6mm1
66261107852 R3 166261107853 R4 1
Part Number Angle Max depth Pk qty66261107854 15°
6mm
166261107855* 22,5° 166261107856 30° 166261107857* 37,5° 166261107858 45° 166261146141* 52,5° 166261107859* 60° 1
* MTO item * MTO item
Aluminium, plastic, brass and all soft metals
Part Number Radius Max depth Pk qty66261113306 R2
6mm1
66261113309 R3 166261113310 R4 1
Part Number Angle Max depth Pk qty66261146145* 15°
6mm
166261146146* 22,5° 166261113311 30° 166261146147* 37,5° 166261113312 45° 166261146149* 52,5° 166261146150* 60° 1
* MTO item
Recommended maximum cut depth is 4mm per pass.
Replace the cutting head in seconds!
Norton is a registered trademark of Saint-Gobain Abrasives.Form # 3208
Saint-Gobain AbrasifsEuropean HeadquartersRue de l’Ambassadeur - B.P.878 702 Conflans Cedex France
Tel: +33 (0)1 34 90 40 00 Fax: +33 (0)1 39 19 89 56
www.nortonabrasives.com