Post on 14-Dec-2015
Night Vision Transfer of Technology (TOT(
Proposal Description
Proposal DescriptionServices:
• Supply the knowledge of the Night Vision Equipment• Supply full set of manufacturing documents (drawings)• Supervise upgrade of current facilities according to plans• Provide all manufacturing and testing equipments , and their installation
instructions• The professional personnel (Optics engineers, system engineers, Optical• personnel) will supervise the construction of the production lines from the early
start until it is fully functional– not on a daily basis – periodically as per understanding between the involved sides
• Definition and identification of sub-contractors and qualified vendors for optics, composite, metal material etc.• Provision of a complete Bill of Material for the selected devices (BOM).p()
Deliverables: Selection of the desired Night Vision Equipment .
Night Vision Monocular
Night Vision Goggle
Night Vision Weapon Sight
Survey in your country and infrastructure design.
Production line, testing tools and machinery requirements and BOM
(to be purchased only from recommended suppliers and / or
delivered by us)
Full set of production Files
BOM For each device
On the Job Training (OJT)
Pre-Series Production
System’s Qualification
Series Production
Proposal Description
PVS-14 Advanced Multi-Purpose Scope
Key Features: Standard US Military System
Hand held spotting scope
Hands free mono-goggle (optional helmet mount)
Day/Night weapon sight (attached to an existing rifle
scope with the optional universal adapter)
Surveillance and night-time photography (with the
use of the optional camera adapter) 5
PVS-14 Advanced Multi- Purpose Scope
Specificatio
ns:Magnification 1x (3x or 5x optional)
Lens System 26 mm f1.2
FOV 40°
Range of Focus 25 cm to infinity
Diopter Adjustment +6 to -4
IR Illuminator Yes
Battery Type/LifeAA (x1) / 20 hoursCR123 / 40 hours
Dimensions 107mm x 50mm x 64mm
Operating Temperature
-40°C to +50°C
6There is a variety of scopes. Final selection shall be made jointly
PVS-7 Night Vision Goggle
7
Key Features:
• Standard US Military System
• Gen II , SuperGen, Gen II+ or Gen III + or
• Internal Low Battery and IR Indicators
• Optional 3x & 5x Lenses
• Light Weight
• Combat Proven
There is a variety of Sights. Final selection shall be made jointly
PVS-7 Night Vision Goggles
Specificatio
ns:Magnification 1x
Lens System 26mm f1.2
Field of View 40°
Range of Focus 20 Cm to infinity
Diopter Adjustment + 2 / - 6
Weather Resistant Waterproof up to 3' up to 30 min
IR Illuminator Yes
Battery Type / Life AA (x2) / 40 hours (Min)
Weight 744g
8
D740-4X Night Weapon Sight
Key Features:•Water Proof
•Rugged Military Design
•Light Weight
•Weaver Style Mounting Base
•Red Mil-Dot reticle
•Top Mounted Objective Focus
9
There is a variety of Sights. Final selection shall be made jointly
be made jointly
D740-4X Night Weapon Sight
Specifications:Magnification - X4
Field of View - 8.3°
Objective Lens Focus - 25mm to infinity
Eyepiece Focus - +2 to –5 dioptres
Eye Relief - 30mm
Entrance Pupil - 70mm
Exit Pupil - 7.5mm
Reticle Adjustment - +/- 17mrad
Reticle Type - injected Ballistic (design optional)
Power Supply - AA Alkaline batteries (2 x 1.5v)
Battery Life - 40 hours (nominal) at 20°C
12 hours (nominal) at 0 to -40°C
10
The GOAL
To Set Up Full Tot And Manufacturing
Capability With In 24 Month ARO
Function Description Required SpaceManagement - CEO
- CFO- CTO- VP Marketing - Marketing
100sqm
Production Management - Production Manager- Procurement Manager
20sqm
Production Floor - Technicians- Elctroptic - Electronic - Mechanical
300sqm
QA Optical & Electro-Mechanical
50sqm
Final product storage and deliveries Technician 50sqm
Technical Documentation Technician 30sqmRepair laboratory (after sale services) Technician 30sqm
Stage #1
Survey, Design and Planning of the Core
Facilities & Capabilities:
In this stage we will produce a full SOW (statement of
work) book that will cover all aspect of the projects, will
define the work that will need to be carried in your
country.
The SOW will include comprehensive Planning of the
assembly floor
New Facility Establishment: In this stage will prepare the local facility in your
country according to our plan and will finish the
assembly floor plan.
The basic assembly facility will be installed by us.
We will supply the infrastructure.
** 600 square meter Facility will be able to produce 400-500 devices in a
month.
Stage # 2
Finishing the local facility in your
country:
In this stage we will finish to supply & install all
the necessary equipment that will be needed in
order to produce the 3 NVD's in your country.
We will supply the Test equipments, QA
alignment, bore sighting equipment and Other
Tools
Stage # 3
Optics Lab
Test Equipment
Electro-Optical Equipment for Night Goggles Resolution Test
Electronics and Opto-mechanical Hot Mock-Up Test Equipment for
Night Vision Binocular
Electro-Optical Equipment for Night Goggles Amplification Test
Complete Production and testing files:
We will complete the production and the testing
files Configuration of the specified devices,
including breakdown of the designed
components 3D Design
2D Production DWG
We will provide a full manufacturing book for
the three (3) types of NVG Based Devices.
The manufacturing book will include:
Stage # 4
Stage # 4 Documentation description
Engineering Documentation. (a) Parts List.
(b) Part Electrical Lists .
(c) Part Drawings.
(d) Assembly drawings.
(e) Details of vendor items specifically developed by the OEM for the Licensed Product.
(f) Engineering Change proposals covering details of modifications.
(g) List of components where trace-ability records are important.
(h) Details of environment tests.
(i) Bill of materials and Ordering Specifications
(j) Full technical details of proprietary items.
(k) Material data sheets-chemical composition/mechanical-properties -for all
metallic/non-metallic materials/consumables.
Manufacturing Documentation (a) Process Sheets including details of special processes and finishes.
(b) Complete set of drawings for tooling, jigs and fixtures . .
(c) List of shop consumables with details of specifications; source of procurements data on shelf life.
(d) Assembly tree/sequence, assembly process sheets including assembly settings and checks, assessments to be made, matching sub assemblies, markings.
(e) Any special manufacturing facilities to be set up indicating plant and machinery.
(f) Test equipment
(h) Inspection stages, quality plan, details of inspection equipment, gauges.
(i) Calibration procedures for inspection equipment, gauges, heal treatment & process equipment
(j) Operation Sequence Sheets.
Stage # 4 Documentation description
Stage # 4 Documentation description
Test Documentation (a) Factory Test specification, procedure and acceptance test specification,
(b) Complete set of drawings for manufacture of test jigs including fixtures.
(c) Special category test details (recertification, production series testing, quality assurance Testing.
Technical Manuals Documentation (a) User handbook detailing operational use of equipment
(b) Installation and commissioning manual
(c) Maintenance Manual covering.
(d) Periodic maintenance.
(e) Trouble shooting and fault diagnosis manual.
(f) Recommended Spares List.
Documentation description
Stage # 4 Documentation description
General Documentation (a) Standard inspection method (inward goods in-process and final acceptance).
(b) Process standards/procedures.
(c) Workmanship standards/procedures.
(d) Quality standards/procedures including incoming inspection procedures, quality manuals.
(e) General procedures
(f) Qualified Vendor Lists.
(g) Standard tools, jigs and fixtures.
On the Job Training (OJT):
Our professionals will carry on a local training
During this time our staff will train professional people
to assemble and to support the 3 types NVD.
We will provide 10 kits of any kind at the end of the
construction of the plant
Stage # 5
Program ScheduleARO ARO+10 ARO+12 ARO+14 ARO+18 ARO+20 ARO+24
1 Establish of contract
2 Establish SOW
3 Site survey
4approval of production floor plan
5shipment of production floor hardware & tools
6completion of the production floor
7approval of Specification
8complete of 3D Design
9 manufacturing of samples .
10submitting the manufacturing book and 10 samples of each NVD
11Training in your country
12 full project manager support :
ARO+16 ARO+22ARO+2 ARO+8ARO+6
Contract Signing:
NV Systems Definition:
Assembly, Test, QA alignment / bore sighting Equipment and Other Tools:
SOW
On the Job Training
A top management support:
ARO+4