Post on 18-Feb-2016
description
Neutrino Factory Target Vessel Concept
V. Graves
Target Studies EVOMay 1, 2012
2 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
Review – Two Target Vessel Ideas• Solid billet does not provide adequate shielding
• Continue with shell concept and refine it for IPAC paper
Hollow SS Shell with Tungsten Beads
Machined SS Billet with Cooling Channels
3 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
4 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
5 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
6 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
7 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
8 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
Secondary Helium outlet
Primary Helium inlet Primary
Helium outlet
Secondary Helium
inlet
Hg return
Beam pipe
Hg drain
Hg jet inlet
Hg chambervent line
Maintenance Handle
9 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
Helium outlet
Helium inlet
Hg return
Beam pipe
Hg drain
Hg jet inlet
Hg chambervent line
10 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
11 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
12 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
13 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
14 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
15 Managed by UT-Battellefor the U.S. Department of Energy Target Vessel Concept 1 May 2012
Comments
• Concept assumes helium cooling – water cooling will add significant complexity because of draining issues• Locating and positioning guides not included yet• Handling will be extremely complicated