Post on 13-Aug-2020
MUNICIPAL FIRE HOSE
1-800-334-6823
COMMANDER SUPREMECOMMANDER SUPREMECLASSIC VICTORYCLASSIC VICTORYC
on
stru
ctio
nA
pp
licat
ion
sP
erfo
rman
ceF
eatu
res
Siz
es a
nd
Pre
ssu
reW
eigh
ts (A
ppro
xim
ate)
FIREQUIP 800FIREQUIP 800
Std.Lengths
• Inner and Outer Jackets - 100% High Tenacity Spun Polyester
• Lining - Extruded Synthetic EPDM Rubber
• Protective Treated Coating: WearGuard
• NFPA 1901 Pump Panel Colors: Yellow, Red, Orange, Blue, Green, Tan, Black, White (Treated/Untreated)
• Municipal Attack Line and Supply Line• Relay Pumping/Rural Water Supply• Industrial Fire Fighting• Master Stream Appliances• Crash/Fire Rescue
Flow Characteristics: Very low friction loss, smooth bore
Exclusive Color Coding: Improved communications between pump operator and nozzle man. NFPA 1901 recommendations
Tightly Woven Fabric: Flat folding abrasion and kink resistant
Meets and exceeds all NFPA Standards, current edition
Ten-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1-1/2” 1-15/16” 800 400 12001-3/4” 2-1/8” 800 400 12002” 2-7/16” 800 400 12002-1/2” 3” 800 400 12003” 3-1/16” 800 400 1200
Uncoupled 50’ lengths Size lbs
1-1/2” 17 1-3/4” 19 2” 25 2-1/2” 28 3” 38
50’, 75’, 100’
Double Jacket EPDM Rubber LinedConventional Lightweight Fire Hose
• Inner and Outer Jackets - 100% High Tenacity Spun Polyester
• Lining - Extruded Synthetic EPDM Rubber with 1.88” Waterway
• Protective Treated Coating: WearGuard
• NFPA 1901 Pump Panel Colors: Red, Yellow, Orange, Blue, Green, Tan with Tracer Stripe, White (Treated/Untreated)
• Municipal Attack and Supply Hose• Relay Pumping/Rural Water Supply• Industrial Fire Fighting• Master Stream Appliances• Crash/Fire Rescue• CAFS Applications
Flow Characteristics: Enhanced waterway. Enlarged 1.88” Waterway delivers Highest Flows Available.
Low Friction Loss
Extremely High Kink Resistance with Low Pressure Nozzles
Stands in a Class of its Own, One of a Kind, Back to the Basics of Fire Hose
Meets and exceeds all NFPA Standards, current edition
Ten-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1-3/4” 2-3/16” 800 400 1200
Note: Double expansion rings used when coupling
Uncoupled 50’ lengths Size lbs
1-3/4” 21
50’
Double Jacket EPDM Rubber LinedOversized Waterway
• Inner and Outer Jackets - 100% High Tenacity Spun Polyester
• Lining - Extruded Synthetic EPDM Rubber with a .060” thick tube Calendar Backed Process.
• Protective Treated Coating: WearGuard
• NFPA 1901 Pump Panel Colors: Yellow, Red, Orange, Blue, Green, Tan, Black, White (Treated/Untreated)
• Municipal Attack Line and Supply Line• Relay Pumping/Rural Water Supply• Industrial Fire Fighting• Master Stream Appliances• Crash/Fire Rescue• CAFS Applications
Flow Characteristics: .060” thick liner creates extremely smooth waterway
Very low friction loss
Rated SUPREME for all-around measured performance
Meets and exceeds all NFPA Standards, current edition
Supreme Kink Resistance
Ten-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1-1/2” 1-15/16” 800 400 12001-3/4” 2-1/8” 800 400 12002-1/2” 3” 800 400 12003” 3-9/16” 800 400 1200
Uncoupled 50’ lengths Size lbs
1-1/2” 19 1-3/4” 22 2-1/2” 35 3” 39
50’
Double Jacket EPDM Rubber LinedHeavy Duty Fire Hose
1
MUNICIPAL FIRE HOSE
www.firequip.com
Co
nst
ruct
ion
Ap
plic
atio
ns
Per
form
ance
Fea
ture
sS
izes
an
dP
ress
ure
Wei
ghts
(App
roxi
mat
e)ULTRA COMBATULTRA COMBAT
Std.Lengths
• Outer Jacket - 100% Polyester Filament Yarn
• Inner Jacket/Liner - Synthetic Yarn with Nitrile Rubber Extruded-thru-the-Weave Resulting in a One-Piece Construction
• One Inch Wide White Stripe with Border Tracer Lines Runs Length of Hose, both sides.
• Pre-Dyed Yarns: Day-Glo Yellow, Green
• High Rise Packs• Ideal for Internal Attack Line• Municipal Attack Line• Master Stream Appliances• CAFS Applications• Confined Space Fire Fighting
Flow Characteristics: Oversized Waterway Delivers More Water, Very Low Friction Loss
Virtually Kink Resistant, Unbeatable Anti-Kink Performance
Higher Pressure Rating than Conventional Hose
Lowest Drag Co-efficient Available resulting in less abrasion
Lighweight for reduced firefighter fatigue
Incredible Puncture Resistance
Highly Visible Day-Glo Colors
Ten-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1-3/4” 2-1/8” 1000 500 1500
Uncoupled 50’ lengths Size lbs
1-3/4” 18
50’, 75’, 100’
Double Jacket Polyester Filament YarnExtruded One-Piece Nitrile Rubber Liner
COMBAT MASTER FLOWCOMBAT MASTER FLOW
Double Jacket One-Piece Nitrile Rubber LinerLightweight - Higher GPM - Kink Resistant
• Outer Jacket - 100% High Tenacity Synthetic Yarn Polyester / Nylon Blend.
• Lining - Specially developed nitrile rubber extruded-thru-the-weave one piece liner.
• NO ADHESIVE USED: Unitized Inner Liner
• Protective Treated Coating: WearGuard
• NFPA 1901 Pump Panel Colors: Yellow, Red, Orange, Blue, Green, Tan, White (Treated/Untreated)
• High Rise• Master Stream Appliances• Municipal Attack and Supply Hose• Relay Pumping• Crash/Fire • CAFS Applications
Flow Characteristics: Enhanced waterway. Enlarged 1.88” Waterway delivers Highest Flows Available.
Kink Resistant : Great anti-kink performance. Passes 34", 24" and 18" doorway kink test
Drag Resistance: Much less drag resistance than conventional hose.
Superb Abrasion Resistance: Virtually no signs of wear when subjected to standard FM abrasion test. Outstanding Heat Resistance: Six times more heatresistant than conventional hoseNo Delamination of linerMeets NFPA Standards 1961, current edition
Ten-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1-3/4” 2-1/16” 1000 500 15002-1/2” 3” 1000 500 1500
Uncoupled 50’ lengths Size lbs
1-3/4” 18 2-1/2” 28
50’
ATTACK LITE POLYATTACK LITE POLY
Double Jacket Polyester Ultra LightweightThermo-Polyurethane Lined (TPU)
• Inner and Outer Jackets - 100% High Tenacity Spun Polyester
• Lining - Thermo-Polyurethane (TPU) Liner Bond with Inner Woven Jacket
• Protective Treated Coating - Impregnated by a mechanical process to provide a total saturation of a synthetic polymeric treatment, heat fused within and on the outside of the woven jacket. The coating provides superior abrasion, heat, flame, and chemical resistance plus reduces water absorption
• NFPA 1901 Pump Panel Colors: Yellow, Red, Orange, Blue, Green, Tan, White (untreated)
• Number One Preference for High Rise Packs• Industrial and Municipal Fire Fighting• Master Stream Appliances• Municipal Potable Water Transfer• Crash/Fire Rescue• All Cold Weather Applications. -55°F• Relay Pumping for Rural Water Supply
Flow Characteristics: Low friction lossLightweight/Space Saving: Requires Less Spacethan Standard Double Jacket or Rubber HoseReduces Firefighter Fatigue in High RiseConditions with Easier HandlingProtective Color Impregnation: Immediate LineIdentification and Communication Between Pump Operator and Nozzle ManTightly Woven Fabric: With reduced thickness liner,hose folds flat and tight in hose bed. Tight weave enhances abrasion resistance, fights kinking Meets and exceeds all NFPA requirements for Fire Hose, current editionFive-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1-1/2” 1-15/16” 800 400 12001-3/4” 2-1/8” 800 400 12002” 2-5/16” 800 400 12002-1/2” 3” 800 400 12003” 3-1/2” 800 400 1200
Uncoupled 50’ lengths Size lbs
1-1/2” 14 1-3/4” 17 2” 19 2-1/2” 22 3” 30
50’, 75’, 100’
2
MUNICIPAL FIRE HOSE
1-800-334-6823
Co
nst
ruct
ion
Ap
plic
atio
ns
Per
form
ance
Fea
ture
sS
izes
an
dP
ress
ure
Wei
ghts
(App
roxi
mat
e)
Std.Lengths
FULL FLOWFULL FLOW
Double Jacket Thermo-Polyurethane (TPU) LinedUltra Lightweight / Higher GPM
Uncoupled 50’ lengths Size lbs
1-3/4” 15 2-1/2” 21 3 26
• High Rise Packs• Master Stream Appliances• Municipal Attack and Supply• Relay Pumping• Crash/Fire Rescue• Industrial Fire Fighting• Potable Water Transfer• All Cold Weather Applications. -55°F
Size Bowl Size Proof psi Service psi Burst psi1-3/4” 2-1/8” 800 400 12002-1/2” 3” 800 400 12003” 3-5/16” 800 400 1200
• Outer Jacket - 100% High Tenacity Polyester
• Lining - Specially developed polyurethane bonded weave process. Both warp and filler yarns are permanently bonded with urethane to form a unitized liner.
NO ADHESIVES USED
• Protective Treated Coating: WearGuard
• NFPA 1901 Pump Panel Colors: Yellow, Red, Orange,Blue, Lime Green, White (Treated)
Lightweight/Space Saving: Requires less space, lighter weight than standard double jacket hose, easier to handle
Flow Characteristics: Extremely low friction loss. High flow.
Kink Resistant: Self-straightening when charged. Can be backed out through a 34'doorway without kinking
Color Coding: Immediate identification and communication of hose lines between pump operator and nozzle man
No Delamination: Lining material is permanently bonded to warp and filler yarns. No Adhesives UsedFive-Year Warranty
50’, 75’, 100’
• Outer Jacket - 6.6 Nylon entangled filament polyamide
• Lining - Extruded Synthetic EPDM Rubber
• Protective Treated Coating: Impregnated by a mechanical process to provide a total saturation of a synthetic polymeric treatment, heat fused within and on the outside of the woven jacket. The coating provides superior abrasion, heat, flame,and chemical resistance.
• NFPA 1901 Pump Panel Colors - Yellow, Red, Orange, Blue, Green, Tan
• Industrial and Municipal Fire Fighting• Master Stream Appliances• Attack & Supply • Crash/Fire Rescue• Relay Pumping / Rural Water Supply
Lightweight/Space Saving: Lighter and more compact than most double jacket rubber lined fire hose
Flow Characteristics: Low friction loss
Exclusive Color Coding: Immediate identification and communications of hose lines between pump operator and nozzle man
Tightly Woven Fabric: Flat folding, abrasion and kink resistant, less drag resistant
Meets and exceeds all NFPA requirements for Fire Hose, current edition
Ten-Year Warrantty
Size Bowl Size Proof psi Service psi Burst psi1-1/2” 1-15/16” 800 400 12001-3/4” 2-1/8” 800 400 12002-1/2” 3” 800 400 12003” 3-1/2” 800 400 1200
Uncoupled 50’ lengths Size lbs
1-1/2” 17 1-3/4” 19 2-1/2” 30 3” 36
50’, 75’, 100’
DJ 800 NYLON RUBBER LINEDDJ 800 NYLON RUBBER LINED
Double Jacket Nylon EPDM Rubber LinedLightweight Fire Hose
ATTACK LITE NYLONATTACK LITE NYLON
Uncoupled 50’ lengths Size lbs
1-1/2” 12 1-3/4” 14 2-1/2” 21 3” 24
50’, 75’, 100’
• Outer Jackets - 6.6 Nylon Entangled Filament Polyamide
• Lining - Thermo-Polyurethane (TPU) Liner Bond with Inner Woven Jacket
• Protective Treated Coating - Impregnated by a mechanical process to provide a total saturation of a synthetic polymeric treatment, heat fused within and on the outside of the woven jacket. The coating provides superior abrasion, heat, flame, and chemical resistance.
• NFPA 1901 Pump Panel Colors - Yellow, Red, Orange, Blue, Green, Tan
• Strong Preference in High Rise Packs• Industrial and Municipal Fire Fighting• Master Stream Appliances• Dual Use, Attack & Supply Hose • Potable Water Transfer• Crash/Fire Rescue• All Cold Weather Applications. -55°F• Relay Pumping for Rural Water Supply
Flow Characteristics: Low friction lossLightweight/Space Saving: Requires Less Space thanStandard Double Jacket or Rubber HoseReduces Firefighter Fatigue in High Rise Conditionswith Easier HandlingProtective Color Impregnation: Immediate LineIdentification and Communication Between PumpOperator and Nozzle ManTightly Woven Fabric: With reduced thickness liner,hose folds flat and tight in hose bed. Tight weaveenhances abrasion resistance, fights kinking Lower Drag Resistance Co-efficientMeets and exceeds all NFPA requirements for FireHose, current editionFive-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1-1/2” 1-15/16” 800 400 12001-3/4” 2-1/8” 800 400 12002-1/2” 3” 800 400 12003” 3-1/2” 800 400 1200
Double Jacket Lightweight NylonThermo-Polyurethane (TPU) Liner
3
www.firequip.com
INDUSTRIAL HOSE FORESTRY HOSEC
on
stru
ctio
nA
pp
licat
ion
sP
erfo
rman
ceF
eatu
res
Siz
es a
nd
Pre
ssu
reW
eigh
ts (A
ppro
xim
ate)
Std.Lengths
• Outer Jackets - 100% High Tenacity Polyester, Single Jacket
• Liner - Extruded Synthetic EPDM Rubber
• Protective Treated Coating - WearGuard
• Colors - White
• Non-Stocking Colors Made to Order - Yellow, Red, Orange, Blue, Green, Tan
• Utilities• Mill Discharge• Underground Mine Fire Fighting (MSHA)• Shipboard• Wash Down and Maintenance• In-Plant Fire Protection• General Industrial, Construction Use
Premium Quality, long wearing hose
Tightly woven spun polyester yarns for superior abrasion resistance
Longer service life
Mildew, chemical and scuff resistant
FM Approved
One-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1-1/2” 1-3/4” 500 250 9002” 2-1/16” 500 250 9002-1/2” 2-7/8” 500 250 9003” 3-11/16” 400 200 600
Uncoupled 50’ lengths Size lbs
1-1/2” 13 2” 14 2-1/2” 22 3” 29
50’, 75’, 100’
Single Jacket Industrial HoseEPDM Rubber Lined
SINGLE JACKETSINGLE JACKET RACK AND REELRACK AND REEL WILDLAND ULTRA FORESTRY
• Outer Jackets - Single Jacket High Tenacity Polyester Filament Yarn
• Liner - Thermo-Polyurethane (TPU) bonded to fabric jacket
• Colors - White (Untreated only)
• Folded to fit pin racks - Number of Pins 50’ 75’ 100’ 10 18 25• Brass couplings standard
• Occupant Use Hose• Standpipe Hose• Indoor Fire Protection• Hotels, Schools, Commercial, Industrial
All synthetic standpipe hose
Replaces linen hose
Extremely light, flexible and compact (folded)
Maintenance free - mildew resistant
One-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1-1/2” 1-11/16” 500 250 7502-1/2” 2-3/4” 500 250 750
Uncoupled 50’ lengths Size lbs
1-1/2” 5 2-1/2” 11
50’, 75’, 100’
Single Jacket Thermo-Polyurethane LinerPin Rack Folded
• Outer Jackets - 100% PolyesterYarn with Filament Polyester Filler Yarns
• Liner - Extruded thermo-polyurethane, compounded to resist ozone
• Protective Treated Coating - WearGuard
• Colors - Yellow
• Specification 187, meets USDA FSS 5100-187 Type 1
• Brush, Grass and Forestry Fires• Designed for use with portable pumps, heavy duty pumps and tank trucks• Wildland Applications
Premium Quality, long lasting hose
Mildew Resistant - No drying required
Lightweight - Designed to be carried by back pack or by hand for long distances over steep or rough terrain and forest conditions
Color Impregnation for greater abrasion resistance, heat resistance, reduced water absorption
Non-weeping (weeping hose available upon request)
One-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1” 1-3/16” 600 300 9001-1/2” 1-3/4” 600 300 900
Uncoupled 50’ lengths Size lbs
1” 4 1-1/2” 7
50’, 100’
Single JacketThermo-Polyurethane Lined
WILDLAND ULTRA FORESTRY
4
BOOSTER HOSE
1-800-334-6823
HI - PRESSUREHI - PRESSUREREEL - LITEREEL - LITEC
on
stru
ctio
nA
pp
licat
ion
sP
erfo
rman
ceF
eatu
res
Siz
es a
nd
Pre
ssu
reW
eigh
ts (A
ppro
xim
ate)
FIRE ENGINE BOOSTERFIRE ENGINE BOOSTER
Std.Lengths
• Outer Cover - Specially compounded red neoprene tough cover
• Inner Tube - Smooth Black Synthetic SBR Rubber
• Flexible Strength - Reinforced with two braids of high tensile rayon yarn
• Barway Couplings or Extrernal Crimped Steel Couplings
NOTE: The 3/4” Diameter Hose-Coupled with 1” threaded couplings
• Attack Line Hose for Multiple Purposes• Initial Frontline Attack• Structure Fire Fighting• Vehicle Fires• Grass, Wildland and Forestry Fires• Industrial Fire Fighting
Smooth inner tube for low friction loss
First Attack Fully Loaded, Ready on Reel
Tough and Durable - Special neoprene compound provides a tough yet flexible cover that resists abrasion, gouging, ultra-violet and ozone aging and most chemicals
Flexible Ease of Handling - Smooth outer cover lowers drag resistance
Safety Factor - 4:1 safety factor ensures safety and reliability (1”& 3/4”)
Meets and exceeds NFPA Standards 1961, current edition
Five-Year Warranty
Size Bowl Size Working Pressure Burst psi
3/4” 1-1/4” 800 3200 1” 1-1/2” 800 32001-1/2” 2” 200 600
Note: 1.5” has a 3:1 Safety Factor
Uncoupled Lengths in lbs Size 100' 50'
3/4” 42 21 1” 60 30 1.5” 100 50
Any Length up to 400'
Rayon Braid Reinforced NeopreneRed Reel Booster Hose
Reel Lite BoosterLightweight Woven TPU Forestry Reel Hose
• Single Jacket - 100% High Tenacity Polyester Cover
• Circular Woven with Helical Inner Reinforcement
• Polyurethane Liner
• Expansion Ring Couplings or Field Repairable Couplings
• Protective Treated Color - Wear Guard, Yellow or Red
• First Arrival Frontline Attack Line• Grass and Brush Fires• Wildland Fires• Dumpster Fires• Industrial Use
Lightweight
Flexible with Helix Reinforcement
Low Drag Resistance Coefficient
Fully Loaded, Ready on Reel
TPU Liner has Low Kink Resistance
One-Year WarrantyRecommended Reel Size 12” MinimumOne-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1” 1-3/16” 600 300 900
Uncoupled Lengths in lbs Size 100' 50'
1” 20 10
50' and 100'
High Pressure BoosterSteel Braid Reinforced 3000 psi Booster Hose
• Outer Jacket - Tough durable black rubber cover resistant to oil, weather and abrasion
• Liner - Smooth inner tube reinforced with two braids of steel wire
• Couplings - Hydraulic style crimped coated steel couplings
• Adaptors - Easily adapted for NST or NPSH threads
• Attack Line Hose for Multiple Purposes• Initial Frontline Attack• Stucture Fire Fighting• Vehicle Fires• Grass, Wildland and Forestry Fires• Industrial Fire Fighting• Replacement Hose for John Beam High Pressure Pumps
First Attack, Fully Loaded on Reel
Black outer jacket easily maintained
Smooth inner tube for low friction loss
Wire reinforcement maintains rigidity under pressure yet remains flexible
Increased safety factor for high pressure pumps
Meets and exceeds NFPA Standards 1961, current edition
Five-Year Warranty
Size Working Pressure psi Burst psi
3/4” 3000 12,000
Uncoupled Lengths in lbs Size 100' 50'
3/4” 53 27
50' and 100'
5
HARD SUCTION HOSE
www.firequip.com
MAXI - FLEX PVCMAXI - FLEX PVCCORRUGATEDCORRUGATEDC
on
stru
ctio
nA
pp
licat
ion
sP
erfo
rman
ceF
eatu
res
Siz
es a
nd
Pre
ssu
reW
eigh
ts (A
ppro
xim
ate)
TANK - FLEXTANK - FLEX
Std.Lengths
• Outer Jackets - Cover and tube synthetic EPDM rubber
• Liner - Special wire helix and nylon fabric reinforcement
• Constructed with soft cuff ends for greater coupling retention
• Smooth Cover and Inner Lining
• Drafting from any rural water source• Designed specifically for rural fire departments ease of handling• Municipal Water Supply Transfer
More flexible than most standard hard suction hose for easier and faster hookup
Tough, durable that can withstand pressure if required
Designed for full vacuum
Ozone Resistant
Meets NFPA Standards 1961, current edition
Five-Year Warranty
Size Bowl Size Working Pressure Burst psi
2-1/2” 3” 150 4503” 3-9/26” 150 4504” 4-5/8” 150 4504-1/2” 5-3/8” 165 4955” 5-7/8” 165 4956” 6-7/8” 165 495
Uncoupled 10’ lengths Size lbs
2-1/2” 16 3” 20 4” 28 4-1/2” 39 5” 43 6” 58
10’ Standard Length
Ultra Light - Ultra FlexibleFor Drafting Only
Conventional Hard RubberWire Reinforced Suction Hose
• Outer Jackets - Cover and tube synthetic EPDM rubber
• Corrugated - "Spiraling Effect" of helix for greater flexibility
• Constructed with soft cuff ends for greater coupling retention
• Ribbed Cover Enhances Flexibility
• Drafting from any rural water source• Designed specifically for rural fire departments ease of handling• Municipal Water Supply Transfer
More flexible than most standard hard suction hose for easier, faster hookup
Tough, durable that can withstand pressure if required
Designed for full vacuum
Ozone Resistant
Meets NFPA Standards 1961, current edition
Five-Year Warranty
Size Bowl Size Working Pressure Burst psi
4-1/2” 5-3/8” 165 4955” 5-7/8” 165 4956” 6-7/8” 165 495
Uncoupled 10’ lengths Size lbs
4-1/2” 30 5” 35 6” 43
10’ Standard Length
Conventional Hard RubberWire Reinforced Suction Hose
• THE ORIGINAL PVC LIGHTWEIGHT SUCTION ONLY HOSE• Introduced by Firequip in 1986• Special corrugated PVC exterior for maximum flexibility and smooth waterway• Clear flexible PVC between the helix ribs for full vision of water• Distinctive black colored helix ribs for maximum UV protection• One-piece extruded aluminum field repairable, reattachable collars on couplings• Collars are aluminum, NOT PLASTIC which is subject to temperature extremes
• Drafting from any rural or municipal non-pressurized water source• Designed for SUCTION ONLY!• PVC hose shall not be used on pressurized hydrants or for relay pumping, this is not a supply hose for hydrant use.• Limited exposure to direct sunlight for long periods of time
Ultra flexible and lightweight, one-man hook-up operation if necessary
Designed for full vacuum
Couplings - NO PLASTIC PARTS, Folding Handles Available
Clear Hose for full vision of water flow
4",4.5”, 5”, 6” coupled with reattachable bolt-on couplings
Meets or Exceeds NFPA Standards 1961, current edition
Five-Year Warranty
3” Expansion Ring Couplings, Reattachable Couplings Available
Working Pressure psiSize 68 degrees F 104 degrees F
3” 45 254” 35 184-1/2” 35 185” 35 186” 30 15
Uncoupled 10’ lengths Size lbs
3” 12 4” 20 4-1/2” 23 5” 25 6” 38
Any Length up to 20’, Standard Length is 10’
6
SUPPLY LINE
1-800-334-6823
Co
nst
ruct
ion
Ap
plic
atio
ns
Per
form
ance
Fea
ture
sS
izes
an
dP
ress
ure
Wei
ghts
(App
roxi
mat
e)
Std.Lengths
• Extruded Interlocking Matrix
• Reinforcement - 100% Circular Woven Synthetic Twill Weave
• Cover & Liner - Ribbed Nitrile Cover, Ultra Smooth Nitrile Rubber Liner
• Permanently Bonded to all Warp and Filler Yarns Thru-the-Weave - NO ADHESIVE USED
• Colors - Yellow, Red (Consult Firequip before Ordering Orange, Blue and Green)
• Municipal Attack Line Hose• Relay Pumping• Crash/Fire Rescue• Master Stream Appliances• Industrial Construction, Military Uses• Water and Ice Rescue
Tough and Durable-Special rubber compound provides a tough cover that resists heat and abrasion, snags, hot embers, cuts, most petrochemicals and cold environments
Ease of Handling-Unique construction provides a very flexible, kink resistant, maneuverable hose which packs tightly in hose bed
Low Friction Loss-The ultra-smooth lining and resilient expansion qualities provide maximum flow with minimum friction loss
Low Maintenance, packs wet, resistant to mildew
Meets and exceeds NFPA Standards 1961, current edition
Ten-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
1” 1-3/16” 600 300 9001-1/2” 1-15/16” 600 300 9001-3/4” 2-1/16” 600 300 9002” 2-5/16” 600 300 9002-1/2” 2-7/8” 600 300 9003” 3-5/16” 600 300 900
Uncoupled 50’ and 100’ lengths Size 100’ 50’
1” 18 9 1-1/2” 22 11 1-3/4” 26 13 2” 30 15 2-1/2” 46 23 3” 50 25
25’, 50’, 75’, 100’
HYDRO FLOW - SDHHYDRO FLOW - SDH HYDRO FLOW - LDHHYDRO FLOW - LDH ATTACK LITE POLY / NYLON - LDHATTACK LITE POLY / NYLON - LDH
Extruded-Thru-The-Weave Nitrile RubberSmall Diameter Hose
Extruded-Thru-The-Weave Nitrile RubberLarge Diameter Hose
• Extruded Interlocking Matrix
• Reinforcement - 100% Circular Woven Synthetic Twill Weave
• Cover & Liner - Ribbed Nitrile Cover, Ultra Smooth Nitrile Rubber Liner
• Permanently Bonded to all Warp and Filler Yarns Thru-the-Weave - NO ADHESIVE USED• Colors - Yellow, Red (Consult Firequip before Ordering Orange and Blue)
• Couplings - Available with Storz or Threaded Couplings
• Municipal and Rural Large Diameter Water Supply• Relay Pumping• Crash/Fire Rescue• Master Stream Appliances• Industrial Construction, Military Uses• Water and Ice Rescue
Tough and Durable-Special rubber compound provides a tough cover that resists heat and abrasion, snags, hot embers, cuts, most petrochemicals and cold environments
Ease of Handling-Unique construction provides a very flexible, kink resistant, maneuverable hose which packs tightly in hose bed
Low Friction Loss-The ultra-smooth lining and resilient expansion qualities provide maximum flow with minimum friction loss
Low Maintenance, packs wet, resistant to mildew
Meets and exceeds NFPA Standards 1961, current edition
Ten-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
4” 4-5/16” 500 250 7505” 5-5/16” 450 225 675
Uncoupled 50’ and 100’ lengths Size 100’ 50’
4” 70 35 5” 100 50
25’, 50’, 75’, 100’
Double Jacket Thermo-Polyurethane LinedLarge Diameter Hose
• Inner and Outer Jacket - 100% Virgin Spun Polyester or 100% Nylon
• Liner - Specially Developed TPU Elastomer
• Protective Treated Coating - WearGuard
• Colors - Yellow, Red, Orange, White (stock) , other colors available on order
• Couplings - Available with Storz or Extruded Aluminum Threaded Couplings
• Municipal and Rural Water Supply• Relay Pumping• Crash/Fire Rescue• Master Stream Appliances• Industrial Fire Fighting• Potable Water Transfer• Frequently Used for Soft Suction in Shorter Lengths
Lightweight - Folds flat and compactly for space savings
Easier to handle, reduces firefighter fatigue
Low Friction Loss
High Abrasion Resistance when Treated with WearGuard
Five-Year Warranty
Size Bowl Size Proof psi Service psi Burst psi
4” 4-3/8” 600 300 9005” 5-3/8” 600 300 900
Uncoupled 50’ and 100’ lengths Size 100’ 50’
4” 68 34 5” 84 42
Any Length Up to 100’
7
ACCESSORIES
www.firequip.com
Storz Couplings. Full Line of Locking Storz Couplings for Double Jacket Woven Hose or Extruded-thru-the-weave nitrile Hydro Flow rubber LDH Supply Line Hose. For Double Jacket, Extruded Aluminum Hardcoat Couplings are used. For Hydro Flow nitrile rubber hose, forged aluminum self-locking couplings with no plastic parts are used. Three-part collars are designed to ensure coupling retention and reduce hang-ups when laying hose in the field.
Maxi-Flex Couplings. Extruded aluminum with new and improved extruded aluminum collars, no plastic parts used.
Adaptors and Appliances. Storz and Threaded Adaptors and Appliances are available upon request. Please call for pricing and availability.
Full-Line of Couplings . Full range of couplings for all fire hose applications from 1” forestry to 6” suction hose is sourced from Red Head Brass Couplings, U.S. Couplings, and Action Couplings. Larger diameter couplings available in standard rocker lug RLF x RLM or optional Long Handle Female (LHF) x Rocker Lug Male (RLM) extruded aluminum. Specialty hose orders such as short sections of soft suction can be customized to have LHF x LHF couplings for supply hose applications.
Hardcoat Aluminum 3-Lug Rocker Lug Couplings. Standard NST or IPT threads are available in 3-lug aluminum rocker lug coupling that is supplied with Municipal and Industrial hose. Hardcoat, anodized aluminum is twice as strong as brass with only one-third the weight. Couplings are designed for extra wear resistance that prevents damage to swivel and threads. Both female swivel and male ends have 3-lugs. Couplings are applied to specified pressures with expansion rings using Red Head or Action coupling machines. Hose and coupling assemblies are tested to pressures exceeding proof test pressures to ensure coupling retention and leakage prevention. Special threads are available upon request.
Booster Hose Couplings. Firequip Booster Hose Couplings are Barway Hardcoated, anodized Aluminum Couplings as the standard. Brass and Chrome Brass couplings are also available to meet individual department preferences or specifications. Brass is recommended for all salt water exposure applications to prevent premature corrosion of couplings. NEW! Zinc plated steel crimped couplings, hydraulic fittings.
Special Services. Stamped or engraved numerical sequencing for coupling coding can be done prior to couplings being anodized or hardcoated.
Adjustable Hydrant Wrench. Made of high-strength ductile steel with handle made of plated alloy steel
Universal Spanner and Hydrant Wrench Set. Tough , durable Almag 35 Aluminum castings. Mounts on apparatus for easy accessibility and quick release. Mounting bracket or base can be purchased separately.
Universal Spanner Wrench. An all-purpose wrench featuring belt hook eye, gas cock shutoff, and claws.
Universal Spanner Wrench Set. Features universal spanners and mounting bracket base without hydrant wrench.
Folding Pocket Spanner. Compact folding spanner for rocker lug or lug couplings. Almag 35 Aluminum casting.
Storz Wrench. Almag 35 Aluminum casting for tough, durable , and safehandling of Storz quick disconnects.
Storz Set. Complete set of four Storz wrenches with mounting bracket base for easy access from apparatus.
Note: Please call for further information and pricing on additional accessories such as adaptors, strainers, etc
Large Diameter Hose (LDH) Roller Two Man.Four handle two-man hose roller.
8
NEW!
Sn
ap-t
ite
HF
XA
ng
us
Ch
ief
No
rth
Am
eric
an H
i-Te
chK
ey D
ura
-Flo
wA
rmo
red
Tex
tile
s A
TI
Fle
xlin
e F
low
mas
ter
Att
ack
Sn
ap-t
ite
HF
XA
ng
us
Hi-
Vol
No
rth
Am
eric
an H
i-F
low
Key
Pro
-Flo
wA
rmo
red
Tex
tile
s A
TI
Ko
chek
RC
-LD
HF
lexl
ine
Flo
wm
aste
rN
ied
ner
Su
pp
lylin
eM
erce
des
Meg
aFlo
Ko
chek
DJP
-LD
HN
ort
h A
mer
ican
Sn
ap-t
ite/
Trip
le P
oly
Nie
dn
er-1
87 T
ype
IIN
ort
h A
mer
ican
NA
FH-1
87 &
WF-
500
Sn
ap-t
ite
Typ
e 8F
Key
Fo
rest
ryM
erce
des
MT
F
Mer
ced
es B
oo
stlit
eN
ied
ner
Ree
ltex
Key
Ree
lLit
e
Th
erm
oid
Go
od
year
Sn
ap-t
ite
2B
Ko
chek
PV
CTa
sk F
orc
e P
VC
No
rth
line
Lig
htw
eig
ht
PV
C
Fir
equ
ip B
ran
d N
ame
Co
mp
etit
ive
Co
mp
arab
les
Hyd
ro F
low
SD
H
Hyd
ro F
low
LD
H
Att
ack-
Lit
e P
oly
LD
H
Wild
lan
d U
ltra
Fo
rest
ry
Ree
l-L
ite
Bo
ost
er
Bo
ost
er 8
00
M
axi-
Fle
x P
VC
Lig
ht W
t. S
uct
ion
FIR
EQ
UIP
FIR
E H
OS
EB
RA
ND
CR
OS
S R
EF
ER
EN
CE
CH
AR
T
An
gu
s U
ltim
aA
ng
us
Ult
ima
IIF
lexl
ine
AP
8DK
ey B
ig 1
0N
ied
ner
RX
L-8
00N
ort
h A
mer
ican
Po
ly-T
uff
80
0S
nap
-tit
e/N
atio
nal
8D
Su
per
ior
D8
Mer
ced
es A
qu
aflo
w-P
lus
Sn
ap-t
ite/
Po
nn
Su
pre
me
Un
mat
ched
Sp
ecif
icat
ion
s
An
gu
s H
i-C
om
bat
Fle
xlin
e A
ng
us
Ult
ima
Lit
eK
ey L
ite
Mer
ced
es M
TF
S-8
00D
PN
ied
ner
XL
-800
No
rth
Am
eric
an P
oly
-Flo
wS
nap
-tit
e/N
atio
nal
8T
Fle
xlin
e A
P8D
TP
Sn
ap-t
ite/
Nat
ion
al D
ura
-Pak
No
rth
Am
eric
an D
ura
-Flo
wA
ng
us
Pre
mie
r L
ite
Fle
xlin
e F
lexl
ite
Key
Mag
-Lit
e
Sn
ap-t
ite/
Nat
ion
al N
-Du
raN
ort
h A
mer
ican
Du
ra-B
uilt
An
gu
s P
rem
ier
Fle
xlin
e F
lext
akK
ey M
agn
um
Sn
ap-t
ite/
Po
nn
Co
nq
ues
tA
ng
us
Fir
epo
wer
IIK
ey C
om
bat
Rea
dy
9
Fir
equ
ip B
ran
d N
ame
Co
mp
etit
ive
Co
mp
arab
les
Fir
equ
ip D
J800
Fu
ll F
low
Co
mm
and
er S
up
rem
e
Cla
ssic
Vic
tory
Ult
ra C
om
bat
Att
ack-
Lit
e P
oly
Att
ack-
Lit
e N
ylo
n
DJ8
00 N
ylo
n
Co
mb
at M
aste
r F
low
10
11
12
NFPA PRESSURE RATING DEFINITIONSService Test Pressure:
NFPA Standards 1961, current edition, requires an annual hydrostatic test be conducted by purchaser on all in-service (used) hose to determine suitability for continued safe and practical use. The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. Unless otherwise instructed, the service test pressure will be stenciled according to NFPA Standards on all hose following assembly prior to hydrostatic testing and shipment to our end-user fire service. Example: Firequip Double Jacket 800 will be stenciled service test pressure 400 psi on date of assembly and testing.
Proof/Acceptance Test Pressure:
During manufacturing of the hose at the factory, all new hose will be subjected to a “one-time” proof test pressure prior to shipment. The proof test pressure shall not be less than 2 times the specified service test pressure. Example: Firequip DJ800 is a standard Double Jacket hose with EPDM liner with a proof test pressure of 800 psi and a service test pressure of 400 psi.
Burst Test Pressure:
The minimum burst test pressure shall not be less than 3 times the specified test pressure. Example: Firequip DJ800 is a standard Double Jacket hose with EPDM liner with a service test pressure of 400 psi and a burst test pressure of 1200 psi.
Operating/Working Pressure:
Maximum advisable operating/working pressure should not exceed 90% of the service test pressure (stenciled on the hose at time of assembly and testing) or the maximum operating pressure of the attached couplings.
FIREQUIP LIMITED WARRANTY
Firequip Inc. warrants all of its double jacket and nitrile rubber fire hose products (except thermo-polyurethane (TPU) lined hose which has a five-year (5) warranty) to be free from defects in materials and workmanship for a period of ten (10) years from date of original purchase. This warranty shall provide for the repair or replacement of hose and assemblies proven to have failed due to faulty materials or workmanship during normal and reasonable fire ground use, handling and care of fire hose. Our warranty is limited as follows:
A. All returned product must be accompanied by an RGA# (Returned Goods Authorization) issued by Firequip. Unauthorized returns will be refused.
B. All defective products must be returned to Firequip within thirty (30) days of purchasers claim.
C. Products or parts must be found to be defective in materials and workmanship upon examination and testing by Firequip.
D. Total liability is limited to the purchase price of the goods.
E. Products shall not be considered defective or nonconforming if they substantially fulfill performance requirements and are manufacturing in accordance with Firequip’s Specifications.
F. This warranty will not extend to goods which have been subject to misuse, neglect, accident or improper installation, misapplication under conditions not expressly made specifically known to nor approved by Firequip in advance of shipment or which have been repaired or altered outside Firequip’s facility.
FAILURE TO COMPLY WITH ACCEPTED INDUSTRY PRACTICES IN THE APPLICATION OF THESE PRODUCTS, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE.
This document and other information from Firequip Inc. and its authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that each end-user analyze all aspects of their application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the end-user, through their own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that there is full compliance for all performance, safety and warning requirements of the application. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Firequip Inc. at any time without notice.
! WARNING !
13
12
Mailing Address
P.O. Box 2598 • Burlington, NC 27216-2598Shipping Address
127 N. Broad Street • Burlington, NC 27217
TOLL FREE: 800-334-6823TELEPHONE: 336-227-0123FAX: 336-227-5015WEBSITE: www.firequip.comE-MAIL: fqi@firequip.com
1-800-334-6823 www.firequip.com
SUPPLIER OF QUALITY FIRE HOSEFIRST CLASS • FULL-LINE • FULL-SERVICE