Post on 02-Feb-2021
Mobile weighing systems
Data transmission:
Griptech GmbH – Konrad-Zuse-Straße 8 – 52134 Herzogenrath (Germany) – Telefon +49 2407 555 02 0 – info@griptech.de – www.griptech.de
Hydraulic weighing systems
TC4000 - Highest precision
Weighing accuracy ±0.1%
First legal for trade hydraulic weighing system, with unique accuracy
For trucks with capacity up to 10,000 kg Components vibration and shockproof Tilt-compensation system Protection against overvoltage
TC2000 - The Workhorse
Weighing accuracy ±0.2%
For trucks with capacity up to 50,000 kg Reliable and user-friendly system Components vibration and shockproof Easy installation and calibration No sensors directly on the mast Protected against overvoltages
For warehouse trucks weighing accuracy ±0.2% - 0.5%
Without return to the tank For reach trucks, electric pallet trucks and stackers High and stable system accuracy (±0,2%-0,5% of the capacity of the forklift). Weighing from 80 kg up to a maximum of 2,500 kg Components vibration and shockproof Easy installation and calibration Lowering can always be interrupted No disturbance of the lift hight preselection on the reach truck
TC2000-S - Sexy
ATEX certifiedDelivery incl. certificate for zone 1 or 2.
Stainless steel caseProtection class IP 65
Optionally available:
The weighing accuracy is at all hydraulic weighing systems specified as a percentage of the load capacity of the truck.
Our hydraulic weighing systems are all: insensitive protected installed independent of the load center independent of attachments
TC3000 - Highest precision for large forklifts
Weighing accuracy ±0.1%
For trucks with a capacity from 10,000 kg Components vibration and shockproof Tilt-compensation system Protected against overvoltages
TC3000RS (SOLAS) - For Reachstacker
Weighing accuracy ±0.2%
Highest accuracy for hydraulic weighing systems Robust system with the best accuracy SOLAS approved Method 1 SmartBox for data transmission Protected against overvoltages
Pressure sensor with ±1.5% accuracy
Robust, insensitive system High-precision pressure sensor Standard with memory function Incl. RS232 interface (round plug 4-pin) Optional with numeric keypad (display R420) Supply voltage 12 volts
LI400 - Load indication system
Weighing accuracy ± 0.5%
Robust and protected installed High dosage accuracy Possible to combine with large display
TC1000-D - Dosing system
External large display for the TC1000-D
G400 indicator for TC1000-D and LI400
Weighing accuracy ±2%
The system warns you if the truck is overloaded Acoustic and / or visual warning User-friendly and easy to install Increases safety during operation, decreases repair costs
OLP - Overload protection system
Overload protection system OLP
With us you will achieve the best results
Weighing accuracy 0.1% of the applied load
Accurate results with 6 integrated load celss Reconstruction by Griptech. Robust design especially for receiving the load cells All welding works certified according to ISO 3834-2 Legal for trade version including class III certificate Optonal EP 8 on request
Electric pallet trucks and stackers
Lowered height remains unchanged
HARDOX Sliding Pads
Total height of the weel arms increased by 6 mmWeighing accuracy ±2%
The system warns you if the truck is overloaded Acoustic and / or visual warning User-friendly and easy to install Increases safety during operation, decreases repair costs
Weighing accuracy 0.1% of the applied load Robust and easy to use hand pallet truck 2,000 kg carring capacity Equipped with 2 load cells in one line in each fork Also available in Legal for Trade Optionally with printer Optional stainless steel version
Available in 3 colors(blue, red, orange)
Tandem polyurethane wheels
High lifter Also available in Legal for
Trade version
Electric and hand pallet truck
Hand pallet truck
Weighing accuracy 0.1% of the applied load
Signal transmission via bluetooth or spiral cable Also available in Legal for Trade Available with fork positioner 2 load cells for high accuracy Weighing at every lifting hight User-friendly system Version FEM 2 and FEM 3 ‚Heavy Duty’ version with 6 load cells
Version with bluetooth transmissionTransmitter and battery protected
Weighing accuracy 0.5% of the applied load
Robust construction with optimal visibility Hook on version or integrated into the mast Signal transmission via bluetooth or spiral cable Load capacity up to 5,000 kg
Combination with attachmentsHeavy Duty version
Forks and fork carriagein combination with load cells
Weighing forks Weighing fork carriage
In combination with a rotator or with fork positioner
Display R420 with numeric keypad
Display X320 with protection class IP68/ IP69K Cold store suitable
Indicator: Printer:
Label printer
Thermal printer Dot matrix printer
Thermal printer
Data transmission:
Bluetooth
Wifi (Moxa Port)
Switchbox
SmartBox
Options
Your partner for:
Attachments
Weighing systems
Camera systems
Griptech GmbH – Konrad-Zuse-Straße 8 – 52134 Herzogenrath (Germany) – Telefon +49 2407 555 02 0 – info@griptech.de – www.griptech.de
Telephone or personal advice Free demonstrations directly at the customer
International installation on site by technicians from Griptech Training by professional technicians Several years of experience lead to less downtime of the trucks
Installation directly on site by our service technicians