Post on 08-Sep-2021
HOW TO TELL
DATE CODETo validate alarm end of life, check the back of the alarms for the manufacture date.
If the date is coded 2012 or earlier, the alarm needs to be replaced.
END OF LIFE SIGNALAlarm "chirps" 5 times with 5 Green LED flashes once per minute.
MILLIONS OF ALARMSARE COMING TO END-OF-LIFE
Contact your sales representative for details or visit brkelectronics.com/CO-end-of-life
Many statesadopted CO alarm
requirements in 2012.
Time’s up! Replace the alarms in
affected buildings!
CO & Combo alarms featured sensors with an end of life signal.
7YRS
DID YOUKNOW?
BRK CO & Comboalarms now feature a 10-year sensor life.
Contact your sales representative for details or visit brkelectronics.com/CO-end-of-life
HARDWIRED SMOKE & CO COMBO
SC9120LBL SC7010BVSC9120B SC7010B
HARDWIRED CO
CO5120PDBN CO5120BN
BATTERY SMOKE & CO COMBO
PRC710B PRC710V
PLUG-IN CO
CO605B CO615B
REPLACEMENT ALARMSMEETING REQUIREMENTS*
BATTERY CO
CO250BCO910B CO511B CO400B CO410B
SCO2B
*DISCLAIMER: The information provided herein is BRK Brands, Inc.'s summary interpretation. It is only intended to be used as general reference material. It is neither authoritative nor intended to take the place of either the written law or applicable regulations. This should not be construed as an attempt to offer or render legal advice, a legal opinion, or otherwise engage in the practice of law. Check with your state and local authorities for complete information.