Mickey Mouse Clubhouse New Year Mickey’s Top...

What You Will Need• Color printer• Heavyweight paper (we suggest 65 lb. paper)• Cutting tools• Glue• Tape• Note: Cutting intended for grown-ups only

Instructions 1. Print your pages. Set aside to dry. 2. Cut out the Hat, Top Rim, Bottom Rim, Hat Cover

along the solid lines.

Mickey Mouse Clubhouse New Year Mickey’s Top Hat

3. Glue the Top Rim and Bottom Rim together so that printed sides are facing out. Let dry.

4. Cut out the center of the Rim along the solid lines.

5. Crease the fl ap on the hat. Fold the Hat into a cylinder. Glue the fl ap to the inside of the Hat.

6. Crease tabs on the Rim. Apply glue to the tabs on the Rim. Attach the Rim to the cylinder of the Hat.

7. Crease tabs on the Hat Cover. Apple glue to the tabs of the Hat Cover. Attach to the cylinder of the Hat.

SM PLAYHOUSEDISNEY.COM/CELEBRATIONCENTER © DISNEY

Mickey’s Top Hat & Bowtie

What You Will Need• Color printer• Heavyweight paper (we suggest 65 lb. paper)• Cutting tools• Double sided tape• Note: Cutting intended for grown-ups only

Instructions 1. Print your pages. Set aside to dry. 2. Cut out the shape of the tiara. Start along the side

of the tiara cutting ONLY the solid lines.

Mickey Mouse Clubhouse New Year Minnie & Daisy Tiaras

3. Score and fold the tiara and backstrap. Afterwards, apply glue and stick them together.

5. Place on your head!

4. Place double sided tape at the edges of the strap and attach to the tiara.

Mickey Mouse Clubhouse New Year Minnie & Daisy Tiaras

What You Will Need• Color printer• Heavyweight paper (we suggest 65 lb. paper)• Cutting tools• Single hole puncher

• Glue• String or twine• Note: Cutting intended for grown-ups only

Instructions 1. Print your pages. Set aside to dry. 2. Cut out the shape of the star. Start along the side

of the star cutting ONLY the solid lines. Use a hole puncher to cut out the 2 white holes on each star shape.

Mickey Mouse Clubhouse New Year Streamer

3. Take a piece of string and begin to weave it through the holes at the top of the stars. Be sure to weave from the front of the star through to the back.

Mickey Mouse Clubhouse New Year Streamer

SM PLAYHOUSEDISNEY.COM/CELEBRATIONCENTER © DISNEY© DISNEY

What You Will Need• Color printer• Heavyweight paper (we suggest 65 lb. paper)• Cutting tools• Tape• String or twine• Hole puncher• Note: Cutting intended for grown-ups only

Instructions 1. Print your pages. Set aside to dry. 2. Cut out the large center stars along the solid lines.

Glue the two large stars together so that the printed sides are facing out. Let dry completely. When you are fi nished you will have two stars, one larger frame star and the inside star that says “Happy New Year!”

Mickey Mouse Clubhouse New Year Mobile Centerpiece

3. Cut out the smaller stars and Hooray along the solid lines.

4. Fold smaller stars in half along the dotted lines so that both printed sides are facing out. Glue the two sides together.

6. Use a hole puncher to cut out the white holes on all the stars and the top of the Hooray piece.

5. Glue the two halves together. Once dry, cut out the white space, leaving you with the dark blue frame and the inside “Hooray” box.

10. Take the four pieces of 6.5” string and thread through the holes on the smaller stars with Mickey, Donald, Goofy, and Pluto. Tape the string with clear tape. Take the two pieces of 5.5” string and thread through the holes on the smaller stars with Minnie and Daisy. Tape the string with clear tape.

9. Take the 8” piece of string and thread through the two holes shown here. Tape the string to the bottom hole with clear tape. Leave the extra string at the top to hang from the ceiling.

8. To thread the two main stars together, take the 2” piece of string and thread through the top two holes shown here. Tape at both ends with clear tape.

7. Cut string or twine into the following:

1 piece of 2” string2 pieces of 5.5” string4 pieces of 6.5” string1 piece of 8” string1 piece of 11” string

11. Take the piece of 11” string and thread through the hole on the Horray piece. Tape the string with clear tape.

12. Take the Mickey and Donald stars and thread through the holes as shown below.

13. Take the Minnie, Daisy, Goofy, and Pluto stars and thread through the holes as shown below. Take the piece of 11” string and thread through the holes on the Hooray piece. Tape the string with clear tape. Now that the New Year’s Hanging Mobile Centerpiece is all put together, hang over your main seating and/or buffet table.

Mickey star Donald star

Goofy star

Minnie star Daisy star

Pluto star

What You Will Need• Color printer• Inkjet/laser Vellum paper• Cutting tools• Glue and double sided tape• Straws• Note: Cutting intended for grown-ups only

Instructions 1. Print your pages. Set aside to dry. 2. Cut out the shape of the party blower. Start along

the side of the rectangle cutting ONLY the solid lines.

Mickey Mouse Clubhouse New YearGoofy’s Party Blowers

3. Score and fold where along the dotted lines. 4. Apply glue to the smaller tab and glue the party blower together.

5. Score and fold the edge of the party blower then glue together. Allow to dry.

6. Use a pen or straw as a guide to roll the party blower up. Afterwards, wrap with a rubberband and allow to sit for one day before removing.

7. Apply double sided tape to the straw then Insert the straw into the opening of the party blower.

8. Fold the left edge followed by the right edge and to seal the straw in.

9. Allow to dry. Once the party blower has dried, start blowing!

Mickey Mouse Clubhouse New Year Donald’s Confetti Tube

What You Will Need• Color printer• Heavyweight paper (we suggest 65 lb. paper)• Cutting tools• Glue• Confetti

Instructions 1. Print your pages. Set aside to dry. 2. Cut out the Confetti Tube wrapper. Start along the

side of the rectangle cutting ONLY the solid lines.

• Paper towel tubes• Tissue paper• Ribbon• Note: Cutting intended for grown-ups only

3. Put glue on the back side of the paper towel tube printout and wrap onto the empty paper towel tube.

4. Cover the top of the Confetti Tube with the tissue paper and tie a bow with the ribbon.

6. Cover the other end of the tube with tissue paper and tie with ribbon to prevent the confetti from falling out.

5. Fill the paper towel tube with confetti.

Mickey Mouse Clubhouse New Year Mickey’s Top...

Documents

Transcript of Mickey Mouse Clubhouse New Year Mickey’s Top...

Mickey mouse

Mickey Mouse #309

Mickey mouse pirates

Blank Back-to-school-Mickey-Mouse-clubhouse ... · Mouse Party Post If your child enjoys Mickey Mouse, you may enjoy some of the posts I’ve written about my son’s Mickey Mouse

1928 - Mickey Mouse

Mickey mouse reserch

Welcome to Portland Port...Great Xmas £20! present. Tel: 07866 (01305) 131309 839800 MICKEY MOUSE scoops to fit 1993-1999 W:86cm, D:70cm, £10. clubhouse music set. Mickey mouse and

Mickey Mouse Clubhouse FDCOM2

Free Mickey Mouse Clubhouse Party Printables Final

V.Smile V-Motion: Mickey Mouse Clubhouse...Mickey and Pluto want to use the Toon Plane to fly around and look for the bouncy ball. But first they have to fix the plane. Help Mickey

Mickey Mouse #306

CELEBRATE Mickey Mouse Clubhouse Wreath …a.dolimg.com/.../pdf/family/djr_col_mmch_hol_wreath.pdfMickey Mouse Clubhouse Wreath CELEBRATE CHRISTMAS ©Disney Push in the center of the

Weebly · Web view“Mickey Mouse Clubhouse Theme” M-I-C-K-E-Y M-O-U-S-E, M-I-C-K-E-Y M-O-U-S-E It’s the Mickey Mouse Clubhouse. Come inside, it’s fun inside. It’s the Mickey

Mickey Mouse Ice Cream Dollars - orgfree.combolduc.orgfree.com/~rwbolduc/Sheets_files/pdf/Mickey Mouse Cone… · Mickey Mouse Ice Cream Dollars March 1, 2020 $1.00 Southern Dairies

Mickey Mouse - Happy Birthday

By: Sukriti Sharma. Walt Disney originally wanted to call Mickey Mouse ‘Mickey Montimer Mouse.

Create a Story Mickey Mouse Clubhouse

tvtonight.com.au€¦ · Web viewSunday, July 17, 2011. 6:00AM Mickey Mouse Clubhouse (R) G Donald's Special Delivery. Join Mickey Mouse and his friends as they journey on different

Mickey Mouse Clubhouse New Year Countdown Invitationcdnvideo.dolimg.com/cdn_assets/13bca2280adf7ae3c038fb932... · 2013. 8. 20. · positioning the Mouse-ke-Doer piece so that it

Mickey Mouse Clubhouse New Year Donald’s Confetti Tubecdnvideo.dolimg.com/cdn_assets/770e6febd2cb9ff073b4f762a...© DISNEY Mickey Mouse Clubhouse New Year Donald’s Confetti Tube