Post on 03-Apr-2018
Page T12-1www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
SOrnamental Pole Top & Bases
Note: 1. All assemblies are supplied standard with stainless hardware. 2. Contact Pelco for a complete Ornamental product catalog. 3. See Reference Section for available paint colors.
Ornamental Pole Top, Cast Alum, 5-1/4” - 24-1/4” Diameter Pole (36” in Height)
Ornamental Pole Base, 4-Piece Cast Alum,10” - 26” Diameter Pole (40” Footprint)
Ornamental Pole Base, 4-Piece Cast Alum,12” - 16” Diameter Pole (30” Footprint)
Ornamental Pole Base, 4-Piece Cast Alum,8” - 12” Diameter Pole (27” Footprint)
Pelco’s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an easy access door. Available for various pole diameters and with multiple finish options.
Cap Size
5.25 thru
24.25
PB-5354 - - -
Trim Color
T_ _=Paint
Coating
PNC=Process No ColorP_ _=Paint
Pole Diameter
8.00 thru
12.00
PB-5315 - - -
Trim Color
T_ _=Paint
Coating
PNC=Process No ColorP_ _=Paint
PB-5355 - - -
Trim Color
T_ _=Paint
Coating
PNC=Process No ColorP_ _=Paint
Pole Diameter
12.00 thru
16.00
PB-5381 - -Coating
PNC=Process No ColorP_ _=Paint
Pole Diameter
10.00 thru
26.00
Note: Cap Size available in 1” increments.
10/11/17
Page T12-2 www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
Ornamental Pole Top & Bases
Note: 1. All assemblies are supplied standard with stainless hardware. 2. Contact Pelco for a complete Ornamental product catalog. 3. See Reference Section for available paint colors.
Pelco’s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standard 4-piece, Pelco also manufactures the bases with an easy access door. Available for various pole diameters and with multiple finish options.
Ornamental Pole Base w/ Access Door,4-Piece Cast Alum,8” - 12” Diameter Pole (27” Footprint)
PB-5509 - - -
Trim Color
T_ _=Paint
Coating
PNC=Process No ColorP_ _=Paint
Pole Diameter
8.00 thru
12.00
Ornamental Pole Base w/ Access Door,4-Piece Cast Alum,12” - 16” Diameter Pole (30” Footprint)
PB-5510 - - -
Trim Color
T_ _=Paint
Coating
PNC=Process No ColorP_ _=Paint
Pole Diameter
12.00 thru
16.00
Ornamental Pole Base w/ Access Door,4-Piece Cast Alum,10” - 26” Diameter Pole (40” Footprint)
PB-5519 - -Coating
PNC=Process No ColorP_ _=Paint
Pole Diameter
10.00 thru
26.00
10/11/17
Access Door
Page T12-3www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
SPole & Arm Clamps
Note: All assemblies are supplied standard with galvanized hardware.
Pelco’s strain pole clamps are available in various sizes and configurations from 1-way to 4-way. All clamps are hot dip galvanized per ASTM A123.
10/11/17
AP-1003-GLV Strain Pole Clamp Assy, 1-Way 7-1/2” - 10-1/2” Dia Pole, Steel
AP-1004-GLV Strain Pole Clamp Assy, 2-Way 7-1/2” - 10-1/2” Dia Pole, Steel
AP-1005-GLV Strain Pole Clamp Assy, 3-Way 7-1/2” - 10-1/2” Dia Pole, Steel
AP-1006-GLV Strain Pole Clamp Assy, 4-Way 7-1/2” - 10-1/2” Dia Pole, Steel
AP-1052-GLV Strain Pole Clamp Assy, 1-Way 5-1/2” - 7-1/2” Dia Pole, Steel
AP-1051-GLV Strain Pole Clamp Assy, 1-Way 10-1/2” - 13-1/2” Dia Pole, Steel
AP-1113-GLV Strain Pole Clamp Assy, 2-Way 10-1/2” -13-1/2” Dia Pole, Steel
AP-1152-GLV Strain Pole Clamp Assy, 2-Way 13-1/2” - 16-1/2” Dia Pole, Steel
Page T12-4 www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
Pole & Arm Clamps
Note: All assemblies are supplied standard with galvanized hardware.
Pelco’s strain pole clamps are available in various sizes and configurations from 1-way to 4-way. All clamps are hot dip galvanized per ASTM A123.
10/11/17
AP-1053-GLV Strain Pole Clamp Assy, 2-Piece w/ Eyelet 7-1/2” - 8-1/4” Dia Pole, Steel
AP-1054-GLV Strain Pole Clamp Assy, 2-Piece w/ Eyelet 8-1/4” - 8-3/4” Dia Pole, Steel
AP-1055-GLV Strain Pole Clamp Assy, 2-Piece w/ Eyelet 9” - 10” Dia Pole, Steel
AP-1056-GLV Strain Pole Clamp Assy, 2-Piece w/ Eyelet 10” - 11” Dia Pole, Steel
AP-1072-GLV Strain Pole Clamp Assy, 2-Piece w/ Eyelet 10-3/4” - 11-3/4” Dia Pole, Steel
AP-1057-GLV Strain Pole Clamp Assy, 2-Piece w/ Eyelet 12” - 13” Dia Pole, Steel
AP-1122-GLV Strain Pole Clamp Assy, 2-Way 2-Piece w/ Eyelet
7-1/2” - 8-1/4” Dia Pole, Steel
Page T12-5www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
10/11/17
ITC Access Compartments
Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. See Reference Section for available paint colors.
Pelco’s ITC, Integral Terminal Compartment and Hand Hole, is an industry standard that has a low profile and unobstructed opening. The fold-out terminal plate provides for easier wiring access. Available with three terminal block options.
AP-0449ITC Access Ring
Weldment
ITC Access Compartment w/ Door3/8” x 4-3/4” x 27” w/ 12 Circuit
AP-1083 - - -Coating
PNC=Process No ColorP_ _=Paint
85A=Compression65A=Compression30A=Barrier Strip
Terminal Block
Blank=None3AF=3 Amp Fuse10F=10 Amp Fuse
Double Fuse Block
2-1/2”
12”
27”
3/4”
ITC Access Compartment w/ DoorFold out Terminals3/8” x 4-3/4” x 27” w/ 12 Circuit
AP-1125 - - -Coating
PNC=Process No ColorP_ _=Paint
85A=Compression65A=Compression30A=Barrier Strip
Terminal Block
Blank=None3AF=3 Amp Fuse10F=10 Amp Fuse
Double Fuse Block
2-1/2”
12”
27”
3/4”
AP-1087Cover
AP-3671Ring Weldment
AP-7091Terminal Plate
AP-1087Cover
Page T12-6 www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
10/11/17
ITC Access Compartments
Note: All assemblies are supplied standard with stainless steel fasteners.
Pelco’s ITC, Integral Terminal Compartment and Hand Hole, is an industry standard that has a low profile and unobstructed opening. The fold-out terminal plate provides for easier wiring access. Available with three terminal block options.
AP-1081-PNC Double Fuse Block Kit, 600V, 3 Amp Fuse
AP-1117-PNC Double Fuse Block Kit, 600V, 10 Amp Fuse, Texas Spec
AP-1087-PNC ITC Cover Assembly, Vacuum formed ABS
Page T12-7www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
SITC Access Compartments
Note: All assemblies are supplied standard with stainless steel fasteners.
Note:Terminal block conductor range for 65 Amp compression block option is 1-#18 thru 3-#12 per screw.
Note: Terminal block conductor range for 85 Amp compression block option is 1-#18 thru 4-#10 per screw.
10/11/17
Pelco’s ITC, Integral Terminal Compartment and Hand Hole, is an industry standard that has a low profile and unobstructed opening. The fold-out terminal plate provides for easier wiring access. Available with three terminal block options.
AP-1082-PNC Terminal Block Assy, 85 Amp, 600V Compression Terminal Block w/ Hardware and Copper Ground Connector
AP-1065-PNC Terminal Block Assy, 65 Amp, 600V Compression Terminal Block w/ Hardware and Copper Ground Connector
AP-1074-PNC Terminal Block Assy, 30 Amp, 300V Terminal Strip Barrier Type w/ Hardware and Copper Ground Connector
Page T12-8 www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
10/11/17
Typical Strain Pole
Pelco fabricates a variety of steel and aluminum mast arms and poles, ornamental or custom structures. Pelco offers numerous finishes from hot dip galvanized to powder coating. The strain pole clamp can be supplied in various sizes in 1-way thru 4-way options.
30’-0”
24”
18”
GALV (IF REQUIRED)ASTM A123ASTM A123ASTM A123ASTM A153ASTM A153
MATERIAL SPECIFICATIONS
ASTM A-595ASTM A-36ASTM A-36A-36 MOD 55ASTM A-563
POLEPOLEMISC. PLATE & BARANCHOR BOLTANCHOR BOLT NUT
Note: 1. Hot dip galvanized after fabrication.2. Contact Pelco with specific requirements.
5 x 8” Hand Hole
Hex. nuts providedfor plumbing pole (8 req’d)
7” projection above base
Flatwasher (8 req’d)
Anchor bolts (4 req’d)
Pole pre-drilledto accept nut covers
Screw, soc. button hd.(4 req’d)
Nut cover (4 req’d)
Electrical conduit
Pole Base and Anchor Bolt Detail
Hand Hole Detail
12 ga. formed galvhand hole cover
Tapped hole in frame for grounding
5” x 8” hand hole opening
Formed retaining strap
Screw, soc. button hd.
Hand Hole Ring 1/4” x 1-1/2”steel strap (ASTM #A-36)
Strain Pole Clamp1 thru 4-Way
TUBE BUTTDIAMETER
14”13”12”
ANCHORBOLT SIZE
2”-4-1/2 NC x 90”1-3/4”-5 NC x 90”1-1/2”-6 NC x 60”
0.14”/ft taper
Page T12-9www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
10/11/17
Variable Arm Length(see chart)
Variable Pole Height
(20’-0”)
Hand Hole and TerminalCompartment
22-3/4”Terminal
Compartment 20 SectionTerminal Block
Astro-Brac
Astro-BracSignal Connection
Vacuum FormedBackplate
Typical Mast Arm & Pole
GALV (IF REQUIRED)ASTM A123ASTM A123ASTM A123ASTM A123ASTM A-153ASTM A-153ASTM A-153ASTM A-153ASTM A-153
MATERIAL SPECIFICATIONS
ASTM A-595ASTM A-572ASTM A-36ASTM A-36/A572-50A-36 MOD 55ASTM A-448ASTM A-325ASTM A-325ASTM A-325
ARM & POLECLAMP PLATEBASE PLATEMISC. PLATE & BARANCHOR BOLTANCHOR BOLT NUTCLAMP BOLTHEX. NUTWASHERS
ARMLENGTH
10’ - 20’21’ - 26’27’ - 34’35’ - 40’41’ - 46’47’ - 50’
ANCHORBOLTS
1.5” x 60”1.5” x 60”1.5” x 60”1.5” x 60”1.75” x 90”
2” x 90”
Rigid PolePlate
Rigid ArmConnection
(4) High Strength Bolts
Rigid ArmPlate
Pole Cap
Lifting Hook andWire Support(inside Pole)
Anchor Bolts (4 req’d)Electrical Conduit
Flatwasher (8 req’d)
7” projection above base
Hex. nuts providedfor plumbing pole 8 (req’d)
Hand Hole and Terminal Compartment
Pole pre-drilled to accept nut covers
Screw, soc. button hd.(4 req’d)
Nut Cover (4 req’d)
Pole Base and Anchor Bolt
0.14”/ft taper
0.14”/ft taper
Pelco fabricates a variety of steel and aluminum mast arms and poles, ornamental or custom structures. Pelco offers numerous finishes from hot dip galvanized to powder coating. The ITC access compartment makes wiring and maintence trouble free.
Note: Contact Pelco with specific requirements.
Page T12-10 www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
10/11/17
This page is intentionally left blank.
Page T12-11www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
10/11/17
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
Foundation Anchors
PB-5369-GLV Foundation Anchor Assy, 3” Sch 40 x 4’-0” 4-1/2” to 6-1/2” Bolt Circle, 1/2”-13NC Hardware
Note: For residential, ornamental, and walkway lighting with small bases. (wt. 46 lbs.)
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the neccessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The bolt is held by the plate scraper which prevents it from turning.
PB-5508-GLV Foundation Anchor Assy, 3½” Sch 40 x 4’-0” 4-1/2” to 6-1/2” Bolt Circle, 1/2”-13NC Hardware
Note: For residential, ornamental, and walkway lighting with small bases. (wt. 43 lbs.)
48”
(From Bottom of Plate)17-1/2”
7-3/4” 10”3-1/2”
1-3/4” x 3”Handhole Plate
Scraper
48”
(From Bottom of Plate)17-1/2”
8” 9”4”
2” x 4”Handhole Plate
Scraper
Page T12-12 www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
Foundation Anchors
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
10/11/17
PB-5364-GLV Foundation Anchor Assy, 4” Sch 40 x 4’-8” 8-1/4” to 14-3/4” Bolt Circle 3/4”-10NC Hardware
Note: For residential lights, parking lots, and street lights. Typically for pole heights up to 16’. (wt. 94 lbs.)
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the neccessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The bolt is held by the plate scraper which prevents it from turning.
56”
(From Bottom of Plate)17-1/2”
13” 10”4-1/2”
2 x 3”Handhole
PlateScraper
Page T12-13www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
SFoundation Anchors
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
10/11/17
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the nec-cessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The bolt is held by the plate scraper which prevents it from turning.
PB-5372-GLV Foundation Anchor Assy, 6” Sch 40 x 5’-0” 10” to 15” Bolt Circle
1”-8NC Hardware
Note: For residential lights, parking lots, etc. Typically for poles ranging from 20’-30’ in height. (wt.167 lbs.)
Foundation Anchor Assy, 6” Sch 40 x Length9” to 14” Bolt Circle1”-8NC Hardware
PB-5537 - - GLV48=4’-0”60=5’-0”72=6’-0”84=8’-0”
Length
Note: 48’ (wt. 115 lbs.); 60” (wt. 134 lbs.); 72” (wt. 152 lbs.); 84” (wt. 172 lbs.)
Length(From Bottom of Plate)11-1/4”
12” 12”
2-5/8” x 12”Handhole
6-5/8”
60”(From Bottom of Plate)11-1/4”
15” 13”
2-5/8” x 12”Handhole
6-5/8”
PlateScraper
Page T12-14 www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
10/11/17
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
PB-5534-GLV Foundation Anchor Assy, 8” Sch 20 x 5’-0” 11” to 17” Bolt Circle 1”-8NC Hardware
Note: For street and highway lighting. Typically for poles ranging from 30’-50’ in height. (wt.184 lbs.)
PB-5375-GLV Foundation Anchor Assy, 8” Sch 40 x 5’-0” 13” to 18” Bolt Circle 1-1/4”-7NC Hardware
Note: For street and highway lighting. Typically for poles ranging from 30’-50’ in height. (wt. 239 lbs.)
Foundation AnchorsPelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. The carriage bolts, in the hardware kit, are locked in place by the slots in the top plate, preventing them from turning.
60”(From Bottom of Plate)11-1/4”
15-3/4” 14”
2-1/2” x 12”Handhole
8-5/8”
60”(From Bottom of Plate)11-1/4”
18” 13”
2-5/8” x 12”Handhole
8-5/8”
PlateScraper
Page T12-15www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
SFoundation Anchors
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
10/11/17
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. The carriage bolts, in the hardware kit, are locked in place by the slots in the top plate, preventing them from turning.
SP-6360-GLV Foundation Anchor Assy, 8” Sch 20 x 5’-0” 8” to 11” Bolt Circle, 3/4”-10NC Hardware
Note: Designed to be stabilized in conrete footing. Typically for poles up to 30’ in height. (wt. 141 lbs)
PB-5535-GLV Foundation Anchor Assy, 10” Sch 20 x 10’-0” 13-1/2” to 17” Bolt Circle 1”-8NC Hardware
Note: For street and highway lighting. Typically for poles ranging from 30’-50’ in height. (wt. 359 lbs.)
120”(From Bottom of Plate)11-1/4”
15-3/4” 16”
3” x 12”Handhole
10-3/4”
120”(From Bottom of Plate)12”
10” 16”
3” x 24”Handhole
10-3/4”
Page T12-16 www.pelcoinc.com - sales@pelcoinc.com - 405-340-3434 - fax: 405-340-3435
MAS
T AR
MS
& P
OLE
S
Foundation Anchors
Note: See Section T11 for anchor bolt sets and cages.
10/11/17
Various accessories are available to assist in installation of foundation anchors and anchor bolts.
PB-0602-GLV Shim, 1/16” x 2” x 2” Galvanized Steel
Note: Required to connect the Kelly Bar adapter (not supplied) to the foundation anchor for installation. Special hole pattern permits installation of foundation anchors having bolt circle diameters of 9” to 14-3/4”. Zinc 1 Finish.
The Bolt Template is a reusable “tool” used for layout of bolts to be used in concrete for the future installation of poles. Constructed of UV stabilized ABS plastic, the Bolt Templatemay be used for various bolt patterns from 5-1/2” up to 25-1/2”. Accepts multiple conduits through the center with the capacity for up to two 2” conduits and multiple smaller conduits at one time.
- Quick, easy set-up in minutes- 41 different bolt circle patterns, 5-1/2” to 25-1/2”- Easy guide divots every 1/2”- Reusable
Driver Adapter for Foundation AnchorSteel
PB-0604-ZN1
AP-3085-PNC Anchor Bolt Template, ABS Plastic
PB-0603-GLV Shim, 1/8” x 2” x 2” Galvanized Steel
Kelly BarAdapter