Post on 18-Dec-2021
WHAT TECHNICAL SERVICES DO WE OFFER YOU?
Designing the most efficient drainage system for a project is a skill for which the Marley Technical Services team are renowned.
As experts in their field, and with combined experience of over 100 years, they are best placed to answer any queries, as well as being able to advise on design and layout.
Marley Plumbing & Drainage provide technical support to all those involved with the specification and installation of their products. This enables a specialist team to give detailed advice on the best way of utilising the extensive range of products and systems manufactured by the company for building services.
Customers who make a commitment to use Marley Plumbing and Drainage products may benefit from the free design service which is offered for above ground drainage and rainwater systems.
A dedicated phone line and email address staffed by a qualified and experienced team. The team who answer the technical hotline can assist you with any query including installation advice, product information and specification, website navigation, problem solving, special fabrications and system compliance questions.
TECHNICAL ADVICE
By providing us with the relevant drawings, we are able to produce 2D schematic layouts for the soil and waste systems within your building. All of our design engineers have installation experience so are best placed to make sure your soil and waste system is efficient and conforms to current regulations. The result of your request will be an easy-to-read 2D schematic and a schedule of materials for the project.
To request our design service, please contact your local Sales Manager*.
To help us with your request, please supply us with the following information:
• Floor plan drawings showing positions of sanitary appliances together with SVP positions.
• Underground drainage layouts if Durgo AAV’s are to be used.
• Details of the type of soil system required – PVC, HDPE or Acoustic.
• Details of the material of waste required – PVC, ABS or Polypropylene.
• Method of jointing – solvent weld or push-fit.
DESIGN SERVICES
We may be able to advise cost savings using our value engineering techniques. All of our advisers have valuable installation experience which enables us to evaluate systems to ensure they are not over-engineered, yet comply with regulations.
Value engineering is standard practice on our design or material take-off services. Please send your project details via your local Sales Manager*.
££ VALUE ENGINEERING
Save time on site by utilising the skills at Marley to build your bespoke stacks.
The Technical team will provide support throughout the design process, creating drawings for each stack element and liaising with the Fabrications team to ensure that every detail is to specification.
The Fabrications team will pre-build the soil stacks in a controlled factory environment, to project specifications and to the highest quality, with pressure testing on each stack as standard.
The Logistics teams will transport the assembled stacks to site, using a fleet of new state-of-the-art vehicles, designed to transport products safely and efficiently.
For all fabrications enquiries, please speak to your local Sales Manager* who will take you through the fabrications process.
FABRICATIONS SERVICE
* A member of our Customer Services team will be happy to supply details of your local Sales Manager, if you do not have them – call Customer Services on 01622 852585.
BUILDING INFORMATION MODELLING OBJECTS
Using BIM technology at the design stage of a project helps to detect clashes within a building, instead of experiencing them on site. How the sanitary pipework system fits within these constraints can now be tested using the Marley BIM files.
The Marley BIM objects have been designed in Revit with all of the latest COBie data and are available to download from:
www.marleypd.co.uk or www.bimstore.co.uk/manufacturers/marley-plumbing-and-drainage
If you have a question about our BIM objects or have some feedback on our BIM library, simply email: BIM@marleypd.co.uk with your comments.
By providing us with the appropriate drawings listed below, we are able to provide you with a list of the materials required for your project.
For rainwater• Elevation drawings of the building,
showing the rainwater pipe locations.• Roof plans.• Type of gutter system and desired colour.
For soil & waste• Floor plans showing the location of sanitary
appliances and SVPs.• Method of jointing – solvent weld or push-fit.
For underground• Drainage layout showing foul and surface
water systems, including pipe sizes.• Invert and cover levels for inspection chambers.
To request our material take-off service please send the details via your local Sales Manager*.
MATERIAL TAKE-OFFS
* A member of our Customer Services team will be happy to supply details of your local Sales Manager, if you do not have them – call Customer Services on 01622 852585.
By providing Technical Services with roof plans and elevation drawings we can advise on our most suitable eaves gutter system.
RAINWATER CALCULATIONS
2D CAD files are available for the Marley range of products and can be downloaded from www.marleypd.co.uk or via www.fastrackcad.com
CAD FILES
If your building requires a fabricated product such as an unusual gutter angle, our technical team can evaluate the feasibility and provide a solution.
Please email customerservice@marleypd.co.uk with your initial enquiry.
SPECIAL FABRICATIONS
Continuing Professional Development
We offer several Continuing Professional Development (CPD) seminars approved by RIBA and CIBSE.
These seminars can be delivered at your offices and are usually held during lunchtime. We are happy to fund a light lunch for all delegates.
Aimed at the construction industry professional, these seminars are designed to help further in the understanding of the following subjects:
• A guide to modern concealed sanitary systems
• The benefits of using an acoustic drainage system
• A guide to sanitary pipework design
For further details or to arrange an appointment speak to our CPD support team by emailing cpd@marleypd.co.uk
CPD SEMINARS
DRG.No: FAB 001
PROJECT:
DRAWN: L.Winter
Lenham Maidstone Kent ME17 2DE EnglandTel: Maidstone(01622) 858888 Fax 858725
TECHNICAL SERVICES DEPARTMENT
C DHM PLASTICS LTD 2009
Authority to use this drawing is limited
i) Only to the person for whose benefit it was
prepared and to whom it is addressed.
ii) To use only in conjunction with The Company's
products and no other products.
iii) Where a specific site or contract is mentioned
hereon in relation only to that site or contract and to
no other.
Use other than as authorised above will be treated as
an infringement of The Company's copyright or other
design rights and will render the user liable in
damages to The Company.
This drawing and any material shedule is based
on information supplied to The Company, which is not
responsible for checking that they correspond to the
actual conditions on site.
This drawing and the copyright therein is and will at all
times remain the property of DHM Plastics Ltd ("the
Company"). Neither it nor any detail thereof may be
reproduced or divulged to a third party without the
written consent of a Director of The Company.
Copyright Reserved
INSTALLATION TO BE CARRIED OUT IN ACCORDANCE WITHBS EN 12056-2: 2000 AND THE MANUFACTURER'S RECOMMENDEDINSTRUCTIONS.
DATE: 12.01.2016
SCALE: 1:10 @ A3Rev. -VOLUME: 0.096m³
BUTT WELD
KEY:-
MEASUREMENT DATUMDATUM
TITLE: LEN----
CENTRE POINTTOWER
APPROVAL SIGNATURES: DATE:
REFERENCE: SVP G.01 & G.08FLOORS 19 TO 29
NUMBER REQUIRED: 22
REFERENCE DRAWING: F301 52 CPT XX 106 1
REVISION:
CODE DESCRIPTION NO.
S421120 110mm EXPANSION SOCKET 1
S231120 110mm ACCESS PIPE 1
S201156 110mm/56mm BOSS PIPE 1
S245650 56mm PLUG-IN SOCKET 2
S101100 110mm PIPE 1200mm
S105600 56mm PIPE 50mm
BUTT-WELD 6
INSERT WELD 1
CUTS 3
Leng
th o
f pi
pe 5
00m
mS421120
110mm Expansion socket
90°
0°
270°
180°
plan view ofboss pipe
36mm
S20115688.5° Boss branch
with 56mm hole cutin side to accept new
boss connection
S20115656mm bossconnection
56mm pipewelded at 88.5°
S20115656mm bossconnection
DATUM
840m
m
42m
m
S231120110mm Access pipe@ 270°
FFL
S201156110mm x 56mm Boss pipe
@ 270° 56mm insert weld
56mm insert weldS201156
110mm x 56mm Boss pipe
2no S425650Plug-in socket
2no S425650Plug-in socket
DRG.No: FAB 008
PROJECT:
DRAWN: L.Winter
Lenham Maidstone Kent ME17 2DE EnglandTel: Maidstone(01622) 858888 Fax 858725
TECHNICAL SERVICES DEPARTMENT
C DHM PLASTICS LTD 2009
Authority to use this drawing is limited
i) Only to the person for whose benefit it was
prepared and to whom it is addressed.
ii) To use only in conjunction with The Company's
products and no other products.
iii) Where a specific site or contract is mentioned
hereon in relation only to that site or contract and to
no other.
Use other than as authorised above will be treated as
an infringement of The Company's copyright or other
design rights and will render the user liable in
damages to The Company.
This drawing and any material shedule is based
on information supplied to The Company, which is not
responsible for checking that they correspond to the
actual conditions on site.
This drawing and the copyright therein is and will at all
times remain the property of DHM Plastics Ltd ("the
Company"). Neither it nor any detail thereof may be
reproduced or divulged to a third party without the
written consent of a Director of The Company.
Copyright Reserved
INSTALLATION TO BE CARRIED OUT IN ACCORDANCE WITHBS EN 12056-2: 2000 AND THE MANUFACTURER'S RECOMMENDEDINSTRUCTIONS.
DATE: 12.01.2016
SCALE: 1:10 @ A3Rev. AVOLUME: 0.108m³
BUTT WELD
KEY:-
MEASUREMENT DATUMDATUM
TITLE: LEN----
CENTRE POINTTOWER
REFERENCE: SVP F.10 & F.22FLOORS 19 TO 29
NUMBER REQUIRED: 22APPROVAL SIGNATURES: DATE:
REFERENCE DRAWING: F301 52 CPT XX 106 1
REVISION:
CODE DESCRIPTION NO.
S421120 110mm EXPANSION SOCKET 1
S231120 110mm ACCESS PIPE 1
S251111 110mm BRANCH 1
S101100 110mm PIPE 900mm
BUTT-WELD 11
CUTS 4
S201156 110mm/56mm BOSS PIPE 3
S245650 56mm PLUG-IN SOCKET 3
S421150 110mm PLUG-IN SOCKET 1
90°
0°
270°
180°
S421120110mm Expansion socket
Leng
th o
f pi
pe 5
00m
m
S201156110mm x 56mm Boss pipe@ 270°
S201156110mm x 56mm Boss pipe@ 0°
S201156110mm x 56mm Boss pipe@ 0°
S201156110mm x 56mm Boss pipetrimmed by 45mm@ 0°
45m
m
S425650Plug-in socket
S425650Plug-in socket
S425650Plug-in socket
DATUM
1200
mm
40m
m
125m
m
180m
m40
6mm
630m
m
S231120110mm Access pipe@ 180°
FFL
S25111188.5° Branch@ 0° S251111
88.5° Branchtrimmed by 45mm
@ 0°
45m
m
S421150Plug-in socket@ 0°
JULY 2018
For general enquiries and details of your nearest stockist please call the customer services department: Tel: 01622 852585Email: customerservice@marleypd.co.uk
To place an order
For delivery to England & WalesEmail: orders.lenham@marleypd.co.ukFax: 01622 851111For delivery to ScotlandEmail: orders.uddingston@marleypd.co.ukFax: 01698 810307
Head OfficeLenham, Maidstone Kent ME17 2DETel: 01622 858888 Fax: 01622 851111 Email: marketing@marleypd.co.uk
ScotlandBirkenshaw Industrial Estate Uddingston, Glasgow G71 5PATel: 01698 815231 Fax: 01698 810307
Our technical team can help you specify the system you need
Years of experience mean that we can support you throughout your design process and assist with any technical and installation requirements.
BELOW ARE JUST A FEW EXAMPLES OF THE TECHNICAL SERVICES WE OFFER
DESIGNSERVICES ££
VALUE ENGINEERING
TECHNICAL ADVICE
FABRICATIONS SERVICE
RAINWATER CALCULATIONS
MATERIALTAKE-OFFS
CADFILES
BIMOBJECTS
FIELD AND SITE SUPPORT
SPECIFICATION SPECIALFABRICATIONS
IN-HOUSEAND EXTERNAL TRAINING
CPDSEMINARS
For all estimate requestsEmail: estimates@marleypd.co.uk
For assistance or feedback on our BIM libraryEmail: BIM@marleypd.co.uk
For Technical advice please call 01622 852695
marleypd.co.uk