Post on 27-Oct-2021
ALUMINUM AC WAVEPULSE
STAINLESS STEEL DC WAVEPULSE
MILD STEEL PULSE
MILD STEEL LOW-SPATTER
OTC DAIHEN1400 Blauser Drive, Tipp City, Ohio 45371
P: 937-667-0800 | F: 937-667-0885 www.DAIHEN-USA.com
Your Single Source Supplier for
MANUAL ARC WELDING SYSTEMS
ProprietaryLSI Chip
Nanosecond Performance
Wave Pulse
C02
Capable
Welbee power sources deliver the industry’s leading nanosecond performance, the result of a 6 year and $10 million development. Our proprietary LSI chip delivers precise, ultra high-speed arc waveform control, resulting in precise, high-quality welding of any metals with built-in IoT support.
INNOVATIONS & ADVANCEMENTS• WavePulse (“pulse on pulse” with wire
feed control)• One-Knob control (Synergic)• AC-MIG (Pulse with Electrode
Negative Control)• Spatter reduction technology• Robot ready (Built-in compatibility)• High-quality CO2 welding
WELDING’S BEST ELECTRONIC ENGINE
1
2
34
56
AVAILABLE MODELS:1 WB-P400 (Pulse MIG)2 WB-P500L (Low Spatter Pulse) 3 WB-W400 (AC-MIG)
4 WB-A350P (AC/DC Hybrid TIG) 5 WB-M350L (Low Spatter) 6 WB-M500 & WB-M350 (MIG)
C02
D-12000 AIR PLASMA CUTTINGReliable and dependable, this air plasma unit is a more economical option to oxy-fuel and gas plasma systems. Cutting capacity up to 2.5 in. thick material. Wide operation area with workspace up to 100 feet.
MIG-135 GMAW SPOOL GUN SYSTEMA sign makers dream. Ideal for thin-sheet metal welding, with 5 modes of versatility on a variety of materials. Integrated wire spool gun that allows welding from 25 feet away from the power source.
Your Single Source Supplier for
MANUAL ARC WELDING SYSTEMS
BEST WARRANTY IN THE INDUSTRY
3 YEARS Parts & Labor
Arc Welding Power Sources and Plasma Cutting
Power Sources
1 YEAR EXCHANGE on Welbee Power
Sources Ask for complete details
CM-743U Our four-feed roll mechanism delivers increased drive force for reliable feeding of any wire alloy, including soft aluminum.
XTEND-ARC Extending the range of your welding workspace, our durable design allows for remote operation.
DCM-742U Automatic switch-over between welding parameters delivers uninterrupted welding of different materials without wire spool changeover.
BLUE TORCH III• Third generation design• Modular (quick change handle
attachments and triggers)• Ergonomic (lightweight, comfortable,
heat resistant grip with flexible lead)• Models support 200-500 Amps, air and water cooled
www.DAIHEN-USA.com
INTELLIGENT TORCHWeld parameter control in the palm of your hand.
DTX-2200 AC/DC TIG WELD POWER SOURCEPowerful, compact, and lightweight, our single-phase AC/DC TIG machine is the optimal choice for all fabrication projects and maintenance jobs that demand both power and portability. From the garage to the shop floor, this machine delivers when quality and flexibility matter.
WIRE FEEDERS
TORCHES
OPTIONAL WATER COOLER
OTC-3 REV 8/19