Manifold Scissor Through Wall - Revision 9

Post on 09-Mar-2016

217 views 3 download

description

Manifold Scissor Through Wall - Revision 9

Transcript of Manifold Scissor Through Wall - Revision 9

150mm

Centreline of Bath

Scissor Lift Through Wall - Right Hand Bath

10mm minimum (edge of bath to wall)

10mm minimum (edge of bath to wall)

150mm

Centreline of Bath

Scissor Lift Through Wall - Left Hand Bath

10mm minimum (edge of bath to wall)

10mm minimum (edge of bath to wall)

Electrical Connections

450mm

20mm

Optional - only neededfor whirlpool baths.

IP65 rated cable outlet wired to a 5 amp fused spur at high level outsidethe bathroom (13 amp fuse for whirlpool).

Fig. 1

Aquanova Rising Baths Pre-Installation Instructions

Abacus Healthcare Services Ltd, Unit 1 Millennium Way, High Carr Business Park, Newcastle-under-Lyme, ST5 7XE

Tel: 01782 569330 Fax: 01782 569349

www.abacushealthcare.co.uk e-mail: service@abacushealthcare.co.uk

P1 / SBAQ1-9 - issue 9 - 01.04.11

Technical Details - All Aquanova baths rise full of water

1700mm

1550mm

1700mm

585mm400mm750mm 550mm

Fig. 2 Fig. 3

Fig. 4Fig. 5

Internal tub length 1550

Internal tub width 550

Internal tub depth 400

Transfer height (lowest position) 585

Height of lift 350

Fill volume 200 litres

Filling time 4.2 mins @ 0.5 bar pressure

Raising time 18 seconds

Lowering time 12 seconds

Maximum floor loading 400Kgs (equivalent to 1.56Kg/sq cm)

Electrical 24volt battery operation (automatic charging)

Water 22mm steel braided flexible hose with BSPswivel ends

1700mm

750mm

a

b

Note: It is the responsibility of the client to determine the location of thebath in relation to the walls adjacent to the bath (a & b) in Fig. 4

Max.Pownall
Callout
Manifold Dimensions - 170 x 50mm